77 : Metallurgy
-
DIN EN 13601:2021-07
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes, German version EN 13601:2021
7/1/2021 - PDF - German - DIN
Learn More€99.35 -
DIN EN 13603:2021-07
Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes, German version EN 13603:2021
7/1/2021 - PDF - German - DIN
Learn More€92.62 -
DIN EN 13605:2021-07
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes, German version EN 13605:2021
7/1/2021 - PDF - German - DIN
Learn More€92.62 -
NF EN 13411-7, A47-251-7 (07/2021)
Terminations for steel wire ropes - Safety - Part 7 : Symmetric wedge socket
7/1/2021 - Paper - French - AFNOR
Learn More€75.67 -
ASM Handbook Volume 11A
Analysis and Prevention of Component and Equipment Failures
7/1/2021 - Paper - English - ASM
Learn More€630.00 -
NBN EN 10373:2021
Determination of the physical and mechanical properties of steels using models
6/28/2021 - PDF - French - NBN
Learn More€89.00 -
NBN EN 10373:2021
Determination of the physical and mechanical properties of steels using models
6/28/2021 - PDF - German - NBN
Learn More€89.00 -
NBN EN 10373:2021
Determination of the physical and mechanical properties of steels using models
6/28/2021 - PDF - English - NBN
Learn More€89.00 -
BS EN 10373:2021
Determination of the physical and mechanical properties of steels using models
6/25/2021 - PDF - English - BSI
Learn More€180.00 -
NBN ISO 22848:2021
Corrosion of metals and alloys — Test method for measuring the stress corrosion crack growth rate of steels and alloys under static-load conditions in high-temperature water ISO 22848:2021
6/24/2021 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 23449:2021
Corrosion of metals and alloys — Multielectrode arrays for corrosion measurement ISO 23449:2020
6/24/2021 - PDF - English - NBN
Learn More€121.00 -
BS EN 10222-4:2017+A1:2021
Steel forgings for pressure purposes Weldable fine grain steels with high proof strength
6/23/2021 - PDF - English - BSI
Learn More€180.00 -
NBN ISO 23825:2021
Method for evaluating the nodularity of spheroidal carbides — Steels for cold heading and cold extruding ISO 23825:2020
6/17/2021 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 6934-4:2021
Steel for the prestressing of concrete — Part 4: Strand ISO 6934-4:2020
6/17/2021 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 6306:2021
Chemical analysis of steel — Order of listing elements in steel standards ISO 6306:2020
6/17/2021 - PDF - English - NBN
Learn More€37.00 -
NBN ISO 23475-1:2021
Testing method for steel tyre cord — Part 1: General requirements ISO 23475-1:2021
6/17/2021 - PDF - English - NBN
Learn More€121.00 -
UNE-EN ISO 12004-2:2021
Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
6/16/2021 - PDF - Spanish - AENOR
Learn More€83.00 -
UNE-EN ISO 12004-2:2021
Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
6/16/2021 - PDF - English - AENOR
Learn More€99.60 -
BS EN 13600:2021 + Redline
Tracked Changes. Copper and copper alloys. Seamless copper tubes for electrical purposes
6/14/2021 - PDF - English - BSI
Learn More€326.00 -
NBN EN 10222-2:2017+A1:2021
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
6/14/2021 - PDF - French - NBN
Learn More€142.00 -
NBN EN 10222-2:2017+A1:2021
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
6/14/2021 - PDF - German - NBN
Learn More€142.00 -
NBN EN 10222-2:2017+A1:2021
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
6/14/2021 - PDF - English - NBN
Learn More€142.00 -
NBN EN 10222-4:2017+A1:2021
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
6/14/2021 - PDF - French - NBN
Learn More€89.00 -
NBN EN 10222-4:2017+A1:2021
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
6/14/2021 - PDF - German - NBN
Learn More€89.00 -
NBN EN 10222-4:2017+A1:2021
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
6/14/2021 - PDF - English - NBN
Learn More€89.00 -
BS ISO 8287:2021
Magnesium and magnesium alloys. Unalloyed magnesium. Chemical composition
6/11/2021 - PDF - English - BSI
Learn More€151.00 -
BS EN ISO 683-5:2021
Heat treatable steels, alloy steels and free-cutting Nitriding
6/10/2021 - PDF - English - BSI
Learn More€293.00 -
NBN ISO 14404-4:2021
Calculation method of carbon dioxide emission intensity from iron and steel production — Part 4: Guidance for using the ISO 14404 series
6/9/2021 - PDF - English - NBN
Learn More€163.00 -
BS ISO 22407:2021
Metallic materials. Fatigue testing. Axial plane bending method
6/9/2021 - PDF - English - BSI
Learn More€250.00 -
21/30394817 DC:2021
BS ISO 6362-1. Wrought aluminium and alloys. Extruded rods/bars, tubes profiles Part 1. Technical conditions for inspection delivery
6/9/2021 - PDF - English - BSI
Learn More€24.00 -
21/30394820 DC:2021
BS ISO 6362-2. Wrought aluminium and alloys. Extruded rods/bars, tubes profiles Part 2. Mechanical properties
6/9/2021 - PDF - English - BSI
Learn More€24.00 -
21/30394823 DC:2021
BS ISO 6362-3. Wrought aluminium and alloys. Extruded rods/bars, tubes profiles Part 3. rectangular bars. Tolerances on shape dimensions
6/9/2021 - PDF - English - BSI
Learn More€24.00 -
21/30394826 DC:2021
BS ISO 6362-4. Wrought aluminium and alloys. Extruded rods/bars, tubes profiles Part 4. Profiles. Tolerances on shape dimensions
6/9/2021 - PDF - English - BSI
Learn More€24.00 -
21/30394829 DC:2021
BS ISO 6362-5. Wrought aluminium and alloys. Extruded rods/bars, tubes profiles Part 5. Round, square hexagonal bars. Tolerances on shape dimensions
6/9/2021 - PDF - English - BSI
Learn More€24.00 -
21/30394832 DC:2021
BS ISO 6362-7. Wrought aluminium and alloys. Extruded rods/bars, tubes profiles Part 7. Chemical composition
6/9/2021 - PDF - English - BSI
Learn More€24.00 -
21/30394835 DC:2021
BS ISO 6363-1. Wrought aluminium and alloys. Cold-drawn rods/bars, tubes wires Part 1. Technical conditions for inspection delivery
6/9/2021 - PDF - English - BSI
Learn More€24.00 -
21/30394838 DC:2021
BS ISO 6363-2. Wrought aluminium and alloys. Cold-drawn rods/bars tubes wires Part 2. Mechanical properties
6/9/2021 - PDF - English - BSI
Learn More€24.00 -
21/30394841 DC:2021
BS ISO 6363-3. Wrought aluminium and alloys. Cold-drawn rods/bars, tubes wires Part 3. Drawn round bars wires. Tolerances on form dimensions (symmetric plus minus tolerances diameter)
6/9/2021 - PDF - English - BSI
Learn More€24.00 -
21/30394844 DC:2021
BS ISO 6363-4. Wrought aluminium and alloys. Cold-drawn rods/bars, tubes wires Part 4. Drawn rectangular bars wires. Tolerances on form dimensions
6/9/2021 - PDF - English - BSI
Learn More€24.00 -
21/30394847 DC:2021
BS ISO 6363-5. Wrought aluminium and alloys. Cold-drawn rods/bars, tubes wires Part 5. Drawn square hexagonal bars wires. Tolerances on form dimensions
6/9/2021 - PDF - English - BSI
Learn More€24.00 -
21/30394850 DC:2021
BS ISO 6363-6. Wrought aluminium and alloys. Cold-drawn rods/bars, tubes wires Part 6. Drawn round tubes. Tolerances on form dimensions
6/9/2021 - PDF - English - BSI
Learn More€24.00 -
BS EN 13603:2021
Copper and copper alloys. Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
6/9/2021 - PDF - English - BSI
Learn More€250.00 -
BS EN 13605:2021
Copper and copper alloys. Copper profiles and profiled wire for electrical purposes
6/9/2021 - PDF - English - BSI
Learn More€250.00 -
BS EN 13601:2021 + Redline
Tracked Changes. Copper and copper alloys. Copper rod, bar and wire for general electrical purposes
6/8/2021 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 28080:2021 + Redline
Tracked Changes. Hardmetals. Abrasion tests for hardmetals
6/7/2021 - PDF - English - BSI
Learn More€235.00 -
NBN ISO 1083:2021
Spheroidal graphite cast irons — Classification ISO 1083:2018
6/7/2021 - PDF - English - NBN
Learn More€163.00 -
NBN ISO 16112:2021
Compacted (vermicular) graphite cast irons — Classification ISO 16112:2017
6/7/2021 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 945-4:2021
Microstructure of cast irons — Part 4: Test method for evaluating nodularity in spheroidal graphite cast irons ISO 945-4:2019
6/7/2021 - PDF - English - NBN
Learn More€142.00 -
NBN ISO 4939:2021
Steel — Determination of nickel — Dimethylglyoxime spectrophotometric method ISO 4939:2016
6/3/2021 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 4942:2021
Steels and irons — Determination of vanadium content — N-BPHA spectrophotometric method ISO 4942:2016
6/3/2021 - PDF - English - NBN
Learn More€58.00 -
€58.00
-
NBN ISO 16630:2021
Metallic materials — Sheet and strip — Hole expanding test ISO 16630:2017
6/3/2021 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 1099:2021
Metallic materials ? Fatigue testing ? Axial force-controlled method
6/3/2021 - PDF - French - NBN
Learn More€121.00 -
NBN ISO 1099:2021
Metallic materials — Fatigue testing — Axial force-controlled method ISO 1099:2017
6/3/2021 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 12106:2021
Metallic materials ? Fatigue testing ? Axial-strain-controlled method
6/3/2021 - PDF - French - NBN
Learn More€163.00 -
NBN ISO 12106:2021
Metallic materials — Fatigue testing — Axial-strain-controlled method ISO 12106:2017
6/3/2021 - PDF - English - NBN
Learn More€163.00 -
NBN ISO 15461:2021
Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests ISO 15461:2018
6/3/2021 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 24213:2021
Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending ISO 24213:2017
6/3/2021 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 12108:2021
Metallic materials — Fatigue testing — Fatigue crack growth method ISO 12108:2018
6/3/2021 - PDF - English - NBN
Learn More€184.00 -
NBN ISO 20064:2021
Metallic materials — Steel — Method of test for the determination of brittle crack arrest toughness, Kca ISO 20064:2019
6/3/2021 - PDF - English - NBN
Learn More€163.00 -
NBN ISO 27306:2021
Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components ISO 27306:2016
6/3/2021 - PDF - English - NBN
Learn More€163.00 -
NBN ISO 17577:2021
Steel ? Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm
6/3/2021 - PDF - French - NBN
Learn More€89.00 -
NBN ISO 17577:2021
Steel — Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm ISO 17577:2016
6/3/2021 - PDF - English - NBN
Learn More€89.00 -
NBN ISO 10144:2021
Steels for the reinforcement and prestressing of concrete — Certification scheme for steel bars and wires ISO 10144:2018
6/3/2021 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 15835-1:2021
Steels for the reinforcement of concrete — Reinforcement couplers for mechanical splices of bars — Part 1: Requirements ISO 15835-1:2018
6/3/2021 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 15835-2:2021
Steels for the reinforcement of concrete — Reinforcement couplers for mechanical splices of bars — Part 2: Test methods ISO 15835-2:2018
6/3/2021 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 15835-3:2021
Steels for the reinforcement of concrete — Reinforcement couplers for mechanical splices of bars — Part 3: Conformity assessment scheme ISO 15835-3:2018
6/3/2021 - PDF - English - NBN
Learn More€37.00 -
NBN ISO 6935-2:2021
Steel for the reinforcement of concrete — Part 2: Ribbed bars ISO 6935-2:2019
6/3/2021 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 11971:2021
Steel and iron castings — Visual testing of surface quality ISO 11971:2020
6/3/2021 - PDF - English - NBN
Learn More€37.00 -
NBN ISO 4986:2021
Steel and iron castings — Magnetic particle testing ISO 4986:2020
6/3/2021 - PDF - English - NBN
Learn More€142.00 -
NBN ISO 4987:2021
Steel and iron castings — Liquid penetrant testing ISO 4987:2020
6/3/2021 - PDF - English - NBN
Learn More€142.00 -
NBN ISO 4992-1:2021
Steel castings — Ultrasonic testing — Part 1: Steel castings for general purposes ISO 4992-1:2020
6/3/2021 - PDF - English - NBN
Learn More€142.00 -
NBN ISO 4992-2:2021
Steel castings — Ultrasonic testing — Part 2: Steel castings for highly stressed components ISO 4992-2:2020
6/3/2021 - PDF - English - NBN
Learn More€142.00 -
NBN ISO 20915:2021
Life cycle inventory calculation methodology for steel products ISO 20915:2018
6/3/2021 - PDF - English - NBN
Learn More€142.00 -
NBN ISO 11484:2021
Steel products — Employer's qualification system for non-destructive testing (NDT) personnel ISO 11484:2019
6/3/2021 - PDF - English - NBN
Learn More€121.00 -
€163.00
-
NBN ISO 6930:2021
High yield strength steel plates and wide flats for cold forming — Delivery conditions ISO 6930:2019
6/3/2021 - PDF - English - NBN
Learn More€89.00 -
NBN ISO 11949:2021
Cold-reduced tinmill products — Electrolytic tinplate ISO 11949:2016
6/3/2021 - PDF - English - NBN
Learn More€142.00 -
NBN ISO 11950:2021
Cold-reduced tinmill products — Electrolytic chromium/chromium oxide-coated steel ISO 11950:2016
6/3/2021 - PDF - English - NBN
Learn More€142.00 -
€121.00
-
NBN ISO 13887:2021
Steel sheet, cold-reduced, of higher yield strength with improved formability ISO 13887:2017
6/3/2021 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 13976:2021
Hot-rolled steel sheet in coils of structural quality and heavy thickness ISO 13976:2016
6/3/2021 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 14590:2021
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability ISO 14590:2016
6/3/2021 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 14788:2021
Steel sheet, zinc-5 % aluminium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities ISO 14788:2017
6/3/2021 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 16172:2021
Steel sheet, metallic-coated by the continuous hot-dip process for corrugated steel pipe ISO 16172:2018
6/3/2021 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 20805:2021
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming ISO 20805:2017
6/3/2021 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 3575:2021
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities ISO 3575:2016
6/3/2021 - PDF - English - NBN
Learn More€89.00 -
NBN ISO 4960:2021
Steel strip, cold-reduced with a mass fraction of carbon over 0,25 % ISO 4960:2019
6/3/2021 - PDF - English - NBN
Learn More€89.00 -
NBN ISO 5000:2021
Steel sheet, aluminium-silicon alloy-coated by the continuous hot-dip process, of commercial and drawing qualities ISO 5000:2019
6/3/2021 - PDF - English - NBN
Learn More€89.00 -
NBN ISO 5952:2021
Steel sheet, hot-rolled, of structural quality with improved atmospheric corrosion resistance ISO 5952:2019
6/3/2021 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 9364:2021
Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities ISO 9364:2017
6/3/2021 - PDF - English - NBN
Learn More€89.00 -
NBN ISO 17745:2021
Steel wire ring net panels — Definitions and specifications ISO 17745:2016
6/3/2021 - PDF - English - NBN
Learn More€89.00 -
NBN ISO 17746:2021
Steel wire rope net panels and rolls — Definitions and specifications ISO 17746:2016
6/3/2021 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 17832:2021
Non-parallel steel wire and cords for tyre reinforcement ISO 17832:2018
6/3/2021 - PDF - English - NBN
Learn More€89.00 -
NBN ISO 19203:2021
Hot-dip galvanized and zinc-aluminium coated high tensile steel wire for bridge cables — Specifications ISO 19203:2018
6/3/2021 - PDF - English - NBN
Learn More€89.00 -
NBN ISO 22034-2:2021
Steel wire and wire products — Part 2: Tolerances on wire dimensions ISO 22034-2:2016
6/3/2021 - PDF - English - NBN
Learn More€37.00 -
€58.00
-
NBN ISO 19959:2021
Steels, nickel alloys and cobalt alloys investment castings — Visual testing of surface quality ISO 19959:2020
6/3/2021 - PDF - English - NBN
Learn More€37.00 -
NBN ISO 18632:2021
Alloyed steels — Determination of manganese — Potentiometric or visual titration method ISO 18632:2018
6/2/2021 - PDF - English - NBN
Learn More€58.00 -
UNE 135122:2021
Metallic safety barriers for vehicles restraint. Accessory elements of the metallic barriers. Materials, geometry, dimensions and test.
6/2/2021 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE 135123:2021
Metallic safety barriers for vehicles restraint. Accesory elements of metallic barriers with tubular post. Materials, geometry, dimensions and tests.
6/2/2021 - PDF - Spanish - AENOR
Learn More€46.00 -
NBN ISO 9349:2021
Ductile iron pipes, fittings, accessories and their joints ? Thermal preinsulated products
6/2/2021 - PDF - French - NBN
Learn More€58.00 -
NBN ISO 9349:2021
Ductile iron pipes, fittings, accessories and their joints — Thermal preinsulated products ISO 9349:2017
6/2/2021 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 16132:2021
Ductile iron pipes and fittings — Seal coats for cement mortar linings ISO 16132:2016
6/2/2021 - PDF - English - NBN
Learn More€89.00 -
UNE 135121:2021
Metallic safety barriers for vehicles restraint. W-beam. Materials, geometry, dimensions and tests.
6/2/2021 - PDF - Spanish - AENOR
Learn More€46.00 -
NF EN 10373, A03-119 (06/2021)
Determination of the physical and mechanical properties of steels using models
6/1/2021 - Paper - French - AFNOR
Learn More€75.67 -
ASTM E606/E606M-21
Standard Test Method for Strain-Controlled Fatigue Testing
6/1/2021 - PDF - English - ASTM
Learn More€57.00 -
ASTM E606/E606M-21 + Redline
Standard Test Method for Strain-Controlled Fatigue Testing
6/1/2021 - PDF - English - ASTM
Learn More€68.00 -
ASTM E466-21
Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
6/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM E466-21 + Redline
Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
6/1/2021 - PDF - English - ASTM
Learn More€61.00 -
DIN EN 10371:2021-06
Metallic materials - Small punch test method, German version EN 10371:2021
6/1/2021 - PDF - German - DIN
Learn More€148.04 -
DIN EN ISO 28080:2021-06
Hardmetals - Abrasion tests for hardmetals (ISO 28080:2021), German version EN ISO 28080:2021
6/1/2021 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 10113:2021-06
Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2020, Corrected version 2020-11), German version EN ISO 10113:2020
6/1/2021 - PDF - German - DIN
Learn More€99.35 -
€10.63
-
€81.00
-
€95.00
-
BS EN 10250-4:2021
Open die steel forgings for general engineering purposes Stainless steels
6/1/2021 - PDF - English - BSI
Learn More€250.00 -
NF ISO 11433, A54-107 (06/2021)
Nickel alloys - Determination of titanium content - Diantipyrylmethane molecular absorption method
6/1/2021 - Paper - French - AFNOR
Learn More€48.00 -
NF EN 10222-4+A1, A36-620-4 (06/2021)
Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength
6/1/2021 - Paper - French - AFNOR
Learn More€60.67 -
NF EN 10222-2+A1, A36-620-2 (06/2021)
Steel forgings for pressure purposes - Part 2 : ferritic and martensitic steels with specified elevated temperatures properties
6/1/2021 - Paper - French - AFNOR
Learn More€86.50 -
NF EN 10222-4/IN1, A36-620-4/IN1 (06/2021)
Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength
6/1/2021 - Paper - French - AFNOR
Learn More€23.00 -
NF EN 10222-2/IN1, A36-620-2/IN1 (06/2021)
Steel forgings for pressure purposes - Part 2 : ferritic and martensitic steels with specified elevated temperatures properties
6/1/2021 - Paper - French - AFNOR
Learn More€23.00 -
DIN EN 10216-5:2021-06
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes, German version EN 10216-5:2021
6/1/2021 - PDF - German - DIN
Learn More€115.33 -
DIN EN 10217-7:2021-06
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes, German version EN 10217-7:2021
6/1/2021 - PDF - German - DIN
Learn More€110.00 -
UNE-EN ISO 11960:2021
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020) (Endorsed by Asociación Española de Normalización in June of 2021.)
6/1/2021 - PDF - English - AENOR
Learn More€215.00 -
ASTM E1030/E1030M-21
Standard Practice for Radiographic Examination of Metallic Castings
6/1/2021 - PDF - English - ASTM
Learn More€57.00 -
ASTM E1030/E1030M-21 + Redline
Standard Practice for Radiographic Examination of Metallic Castings
6/1/2021 - PDF - English - ASTM
Learn More€68.00 -
NBN EN ISO 683-5:2021
Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels (ISO 683-5:2017)
5/25/2021 - PDF - French - NBN
Learn More€121.00 -
NBN EN ISO 683-5:2021
Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels (ISO 683-5:2017)
5/25/2021 - PDF - German - NBN
Learn More€121.00 -
NBN EN ISO 683-5:2021
Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels (ISO 683-5:2017)
5/25/2021 - PDF - English - NBN
Learn More€121.00 -
NBN EN 10250-4:2021
Open die steel forgings for general engineering purposes - Part 4: Stainless steels
5/25/2021 - PDF - French - NBN
Learn More€121.00 -
NBN EN 10250-4:2021
Open die steel forgings for general engineering purposes - Part 4: Stainless steels
5/25/2021 - PDF - German - NBN
Learn More€121.00 -
NBN EN 10250-4:2021
Open die steel forgings for general engineering purposes - Part 4: Stainless steels
5/25/2021 - PDF - English - NBN
Learn More€121.00 -
NBN EN 13603:2021
Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
5/25/2021 - PDF - French - NBN
Learn More€121.00 -
NBN EN 13603:2021
Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
5/25/2021 - PDF - German - NBN
Learn More€121.00 -
NBN EN 13603:2021
Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
5/25/2021 - PDF - English - NBN
Learn More€121.00 -
NBN EN 13601:2021
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
5/25/2021 - PDF - French - NBN
Learn More€142.00 -
NBN EN 13601:2021
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
5/25/2021 - PDF - German - NBN
Learn More€142.00 -
NBN EN 13601:2021
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
5/25/2021 - PDF - English - NBN
Learn More€142.00 -
NBN EN 13605:2021
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
5/25/2021 - PDF - French - NBN
Learn More€142.00 -
NBN EN 13605:2021
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
5/25/2021 - PDF - German - NBN
Learn More€142.00 -
NBN EN 13605:2021
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
5/25/2021 - PDF - English - NBN
Learn More€142.00 -
BS ISO 630-4:2021
Structural steels Technical delivery conditions for high yield strength quenched and tempered structural steel plates wide flats
5/24/2021 - PDF - English - BSI
Learn More€250.00 -
BS EN 13601:2021
Copper and copper alloys. Copper rod, bar and wire for general electrical purposes
5/24/2021 - PDF - English - BSI
Learn More€250.00 -
GB/T 1551-2021
Test method for measuring resistivity of monocrystal silicon—In-line four-point probe and direct current two-point probe method
5/21/2021 - PDF - English - CODCHI
Learn More€412.50 -
GB/T 5777-2019/XG1-2021
Automated full peripheral ultrasonic testing of seamless and welded(except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections, includes Amendment 1
5/21/2021 - PDF - English - CODCHI
Learn More€198.00 -
UNE-EN ISO 4947:2021
Steel and cast iron - Determination of vanadium content - Potentiometric titration method (ISO 4947:2020)
5/19/2021 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 4947:2021
Steel and cast iron - Determination of vanadium content - Potentiometric titration method (ISO 4947:2020)
5/19/2021 - PDF - English - AENOR
Learn More€72.00 -
€68.00
-
€81.60
-
UNE-EN ISO 10893-9:2011/A1:2021
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
5/19/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-9:2011/A1:2021
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
5/19/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-10:2011/A1:2021
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
5/19/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-10:2011/A1:2021
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
5/19/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-11:2011/A1:2021
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
5/19/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-11:2011/A1:2021
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
5/19/2021 - PDF - English - AENOR
Learn More€40.80 -
ASTM A572/A572M-21e1
Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
5/15/2021 - PDF - English - ASTM
Learn More€46.00 -
ASTM A572/A572M-21e1 + Redline
Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
5/15/2021 - PDF - English - ASTM
Learn More€53.00 -
ASTM E572-21
Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
5/15/2021 - PDF - English - ASTM
Learn More€57.00 -
ASTM E572-21 + Redline
Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
5/15/2021 - PDF - English - ASTM
Learn More€68.00 -
ASTM E3279-21
Standard Guide for Managing Heat Stress and Heat Strain in Foundries
5/15/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM E3279-21 + Redline
Standard Guide for Managing Heat Stress and Heat Strain in Foundries
5/15/2021 - PDF - English - ASTM
Learn More€61.00 -
BS EN 10217-7:2021
Welded steel tubes for pressure purposes. Technical delivery conditions Stainless
5/14/2021 - PDF - English - BSI
Learn More€331.00 -
BS EN 10217-2:2019
Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy and alloy with specified elevated temperature properties
5/14/2021 - PDF - English - BSI
Learn More€293.00 -
BS EN 10217-3:2019
Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded and submerged arc alloy fine grain with specified room, elevated low temperature properties
5/14/2021 - PDF - English - BSI
Learn More€348.00 -
BS EN 10217-4:2019
Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy with specified low temperature properties
5/14/2021 - PDF - English - BSI
Learn More€293.00 -
BS EN 10217-5:2019
Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy with specified elevated temperature properties
5/14/2021 - PDF - English - BSI
Learn More€331.00 -
BS EN 10217-6:2019
Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy with specified low temperature properties
5/14/2021 - PDF - English - BSI
Learn More€293.00 -
NBN ISO 17804:2021
Founding — Ausferritic spheroidal graphite cast irons — Classification ISO 17804:2020
5/13/2021 - PDF - English - NBN
Learn More€142.00 -
NBN ISO 17340:2021
Metallic materials — Ductility testing — High speed compression test for porous and cellular metals ISO 17340:2020
5/13/2021 - PDF - English - NBN
Learn More€89.00 -
NBN ISO 16573-1:2021
Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels — Part 1: Constant load test ISO 16573-1:2020
5/13/2021 - PDF - English - NBN
Learn More€58.00 -
BS EN 10217-1:2019
Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded and submerged arc non-alloy with specified room temperature properties
5/13/2021 - PDF - English - BSI
Learn More€331.00 -
NBN ISO 21062:2021
Corrosion of metals and alloys — Determination of the corrosion rates of embedded steel reinforcement in concrete exposed to simulated marine environments ISO 21062:2020
5/8/2021 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 22410:2021
Corrosion of metals and alloys — Electrochemical measurement of ion transfer resistance to characterize the protective rust layer on weathering steel ISO 22410:2020
5/8/2021 - PDF - English - NBN
Learn More€89.00 -
NBN ISO 22858:2021
Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion ISO 22858:2020
5/8/2021 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 22910:2021
Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature (E-CLCT) for Ti alloys fabricated via the additive manufacturing method ISO 22910:2020
5/8/2021 - PDF - English - NBN
Learn More€58.00 -
BS EN 10216-5:2021
Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless
5/5/2021 - PDF - English - BSI
Learn More€348.00 -
NF EN 12206-1, T34-750-1 (05/2021)
Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1 : coatings prepared from thermosetting coating powder
5/1/2021 - Paper - French - AFNOR
Learn More€75.67 -
NF EN 13445-8, E86-200-8 (05/2021)
Unfired pressure vessels - Part 8 : Additional requirements for pressure vessels of aluminium and aluminium alloys
5/1/2021 - Paper - French - AFNOR
Learn More€99.33 -
NF EN ISO 683-5, A03-565-5 (05/2021)
Heat treatable steels, alloy steels and free-cutting steels - Part 5 : nitriding steels
5/1/2021 - Paper - French - AFNOR
Learn More€86.67 -
ASTM A821/A821M-21
Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
5/1/2021 - PDF - English - ASTM
Learn More€46.00 -
ASTM A821/A821M-21 + Redline
Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
5/1/2021 - PDF - English - ASTM
Learn More€53.00 -
ASTM A421/A421M-21
Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete
5/1/2021 - PDF - English - ASTM
Learn More€46.00 -
ASTM A421/A421M-21 + Redline
Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete
5/1/2021 - PDF - English - ASTM
Learn More€53.00 -
ASTM B90/B90M-21
Standard Specification for Magnesium-Alloy Sheet and Plate
5/1/2021 - PDF - English - ASTM
Learn More€54.00 -
ASTM B90/B90M-21 + Redline
Standard Specification for Magnesium-Alloy Sheet and Plate
5/1/2021 - PDF - English - ASTM
Learn More€65.00 -
ASTM B93/B93M-21
Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
5/1/2021 - PDF - English - ASTM
Learn More€46.00 -
ASTM B93/B93M-21 + Redline
Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
5/1/2021 - PDF - English - ASTM
Learn More€53.00 -
ASTM B953-21
Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
5/1/2021 - PDF - English - ASTM
Learn More€46.00 -
ASTM B953-21 + Redline
Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
5/1/2021 - PDF - English - ASTM
Learn More€53.00 -
NF EN 10250-4, A36-630-4 (05/2021)
Open die steel forgings for general engineering purposes - Part 4 : Stainless steels
5/1/2021 - Paper - French - AFNOR
Learn More€86.67 -
NF EN 13601, A51-308 (05/2021)
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
5/1/2021 - Paper - French - AFNOR
Learn More€86.67 -
NF EN 13603, A51-111 (05/2021)
Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
5/1/2021 - Paper - French - AFNOR
Learn More€75.67 -
NF EN 13605, A51-311 (05/2021)
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
5/1/2021 - Paper - French - AFNOR
Learn More€86.67 -
ASTM E32-21
Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
5/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM E32-21 + Redline
Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
5/1/2021 - PDF - English - ASTM
Learn More€61.00 -
ASTM G44-21
Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5?% Sodium Chloride Solution
5/1/2021 - PDF - English - ASTM
Learn More€46.00 -
ASTM G44-21 + Redline
Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5?% Sodium Chloride Solution
5/1/2021 - PDF - English - ASTM
Learn More€53.00 -
ASTM A957/A957M-21
Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
5/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM A957/A957M-21 + Redline
Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
5/1/2021 - PDF - English - ASTM
Learn More€61.00