77 : Metallurgy
-
DIN CEN ISO/TS 6892-5:2025-05
Metallic materials - Tensile testing - Part 5: Specification for testing miniaturised test pieces (ISO/TS 6892-5:2025), German version CEN ISO/TS 6892-5:2025
5/1/2025 - PDF - German - DIN
Learn More€54.39 -
DIN EN 14361:2025-05
Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts, German version EN 14361:2025
5/1/2025 - PDF - German - DIN
Learn More€67.85 -
DIN EN ISO 8044:2025-05
Corrosion of metals and alloys - Vocabulary (ISO 8044:2024), Trilingual version EN ISO 8044:2025
5/1/2025 - PDF - English, French, German - DIN
Learn More€157.29 -
€40.56
-
€102.34
-
DIN EN ISO 4491-3:2025-05
Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen (ISO/DIS 4491-3:2025), German and English version prEN ISO 4491-3:2025
5/1/2025 - PDF - English, German - DIN
Learn More€74.95 -
DIN EN ISO 23779:2025-05
Shot blasting machinery - Safety and environmental requirements (ISO 23779:2024), German version EN ISO 23779:2025
5/1/2025 - PDF - German - DIN
Learn More€135.89 -
DIN EN 10334:2025-05
Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate), German version EN 10334:2024
5/1/2025 - PDF - German - DIN
Learn More€47.38 -
DIN EN 10335:2025-05
Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel, German version EN 10335:2024
5/1/2025 - PDF - German - DIN
Learn More€47.38 -
ISO/DIS 3116:2025
Magnesium and magnesium alloys — Wrought magnesium and magnesium alloys
4/18/2025 - Papier - English - ISO
Learn More€75.00 -
€75.00
-
ISO/DIS 11950:2025
Cold-reduced tinmill products — Electrolytic chromium/chromium oxide-coated steel
4/18/2025 - Papier - English - ISO
Learn More€75.00 -
BS ISO 4997:2025 + Redline
Tracked Changes. Cold-reduced carbon steel sheet of structural quality
4/17/2025 - PDF - English - BSI
Learn More€269.00 -
From: €97.00
-
From: €96.00
-
From: €78.00
-
25/30465414 DC:2025
Draft BS 5897 Steels for the reinforcement of concrete. Reinforcement couplers. Requirements and test methods
4/14/2025 - PDF - English - BSI
Learn More€24.00 -
€191.00
-
ISO/DIS 16630:2025
Metallic materials — Sheet and strip — Hole expanding test
4/9/2025 - Papier - English - ISO
Learn More€75.00 -
25/30480819 DC:2025
Draft BS ISO 16630 Metallic materials. Sheet and strip. Hole expanding test
4/9/2025 - PDF - English - BSI
Learn More€24.00 -
€58.00
-
€75.00
-
BS ISO 6362-6:2025 + Redline
Tracked Changes. Wrought aluminium and alloys. Extruded rods/bars, tubes profiles Tolerances on form dimensions for round, square, rectangular hexagonal
4/3/2025 - PDF - English - BSI
Learn More€373.00 -
25/30475136 DC:2025
BS ISO 148-4 Metallic materials — Charpy pendulum impact test Part 4: Testing of miniature - type V-notch pieces
4/2/2025 - PDF - English - BSI
Learn More€24.00 -
€75.00
-
BS EN 13599:2014
Copper and copper alloys. Copper plate, sheet and strip for electrical purposes
4/2/2025 - PDF - English - BSI
Learn More€266.00 -
PR NF EN ISO 10280, A06-314PR (04/2025)
Aciers et fontes - Détermination du titane - Méthode spectrophotométrique au diantipyrylméthane
4/1/2025 - Papier - English, French - AFNOR
Learn More€76.50 -
PR NF ISO 4942, A06-346PR (04/2025)
Aciers et fontes - Détermination de la teneur en vanadium - Méthode spectrophotométrique au N-BPHA
4/1/2025 - Papier - English, French - AFNOR
Learn More€76.50 -
DIN EN 573-3:2025-04
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products, German and English version prEN 573-3:2025
4/1/2025 - PDF - English, German - DIN
Learn More€135.89 -
DIN EN ISO 16784-2:2025-04
Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig (ISO 16784-2:2024), German version EN ISO 16784-2:2024
4/1/2025 - PDF - German - DIN
Learn More€102.34 -
DIN EN ISO 16784-1:2025-04
Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 1: Guidelines and requirements for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems (ISO 16784-1:2024), German version EN ISO 16784-1:2024
4/1/2025 - PDF - German - DIN
Learn More€88.41 -
€69.00
-
€83.00
-
ASTM B68/B68M-25
Standard Specification for Seamless Copper Tube, Bright Annealed
4/1/2025 - PDF - English - ASTM
Learn More€69.00 -
ASTM B68/B68M-25 + Redline
Standard Specification for Seamless Copper Tube, Bright Annealed
4/1/2025 - PDF - English - ASTM
Learn More€83.00 -
ASTM B432-25
Standard Specification for Copper and Copper Alloy Clad Steel Plate
4/1/2025 - PDF - English - ASTM
Learn More€69.00 -
ASTM B432-25 + Redline
Standard Specification for Copper and Copper Alloy Clad Steel Plate
4/1/2025 - PDF - English - ASTM
Learn More€83.00 -
ASTM B673-25
Standard Specification for Nickel-Iron-Chromium-Molybdenum-Nitrogen Alloy, Nickel-Iron-Chromium-Molybdenum and Iron-Nickel-Chromium-Molybdenum-Copper Welded Pipe
4/1/2025 - PDF - English - ASTM
Learn More€61.00 -
ASTM B673-25 + Redline
Standard Specification for Nickel-Iron-Chromium-Molybdenum-Nitrogen Alloy, Nickel-Iron-Chromium-Molybdenum and Iron-Nickel-Chromium-Molybdenum-Copper Welded Pipe
4/1/2025 - PDF - English - ASTM
Learn More€73.00 -
€61.00
-
€73.00
-
PR NF EN ISO 5832-2, S94-051-2PR (04/2025)
Implants chirurgicaux - Produits à base de métaux - Partie 2 : titane non allié
4/1/2025 - Papier - English, French - AFNOR
Learn More€58.00 -
ASTM B749-25
Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
4/1/2025 - PDF - English - ASTM
Learn More€61.00 -
ASTM B749-25 + Redline
Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
4/1/2025 - PDF - English - ASTM
Learn More€73.00 -
ASTM B1022-25
Standard Specification for Zinc-Aluminum-Magnesium Alloys in Ingot Form for Coating Steel Sheet by the Hot-Dip Process
4/1/2025 - PDF - English - ASTM
Learn More€61.00 -
ASTM B1022-25 + Redline
Standard Specification for Zinc-Aluminum-Magnesium Alloys in Ingot Form for Coating Steel Sheet by the Hot-Dip Process
4/1/2025 - PDF - English - ASTM
Learn More€73.00 -
DIN EN ISO 13947:2025-04
Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen (ISO 13947:2024), German version EN ISO 13947:2024
4/1/2025 - PDF - German - DIN
Learn More€54.49 -
ASTM B655/B655M-25
Standard Specification for Niobium-Hafnium Alloy Bar and Wire
4/1/2025 - PDF - English - ASTM
Learn More€61.00 -
ASTM B655/B655M-25 + Redline
Standard Specification for Niobium-Hafnium Alloy Bar and Wire
4/1/2025 - PDF - English - ASTM
Learn More€73.00 -
ASTM B654/B654M-25
Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
4/1/2025 - PDF - English - ASTM
Learn More€69.00 -
ASTM B654/B654M-25 + Redline
Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
4/1/2025 - PDF - English - ASTM
Learn More€83.00 -
€61.00
-
€73.00
-
NF P34-503-3 (04/2025)
Plaques profilées en tôles d'acier revêtues ou non et panneaux - Partie 3 : compléments nationaux au traitement des résultats d'essais définis dans la NF EN 1993-1-3
4/1/2025 - Papier - French - AFNOR
Learn More€111.00 -
ISO 3575:2025
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
4/1/2025 - Papier - English - ISO
Learn More€113.00 -
€75.00
-
NF ISO 17745, A37-645 (04/2025)
Panneaux de filet en anneaux de fil d'acier - Définitions et spécifications
4/1/2025 - Papier - French - AFNOR
Learn More€70.50 -
NF ISO 17746, A37-646 (04/2025)
Panneaux et rouleaux de filet en câble d'acier - Définitions et spécifications
4/1/2025 - Papier - French - AFNOR
Learn More€80.50 -
DIN EN 10379:2025-04
Steel sheet piles - Test methods, German version EN 10379:2025
4/1/2025 - PDF - German - DIN
Learn More€74.95 -
BS ISO 6362-6:2025
Wrought aluminium and alloys. Extruded rods/bars, tubes profiles Tolerances on form dimensions for round, square, rectangular hexagonal
3/31/2025 - PDF - English - BSI
Learn More€266.00 -
ISO 6362-6:2025
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles
3/28/2025 - Papier - English - ISO
Learn More€113.00 -
€24.00
-
€75.00
-
€75.00
-
BS EN 14361:2025 + Redline
Tracked Changes. Aluminium and aluminium alloys. Chemical analysis. Sampling from metal melts
3/19/2025 - PDF - English - BSI
Learn More€269.00 -
ASTM A480/A480M-25
Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
3/15/2025 - PDF - English - ASTM
Learn More€99.00 -
ASTM A480/A480M-25 + Redline
Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
3/15/2025 - PDF - English - ASTM
Learn More€119.00 -
25/30501401 DC:2025
BS EN 573-3 Aluminium and aluminium alloys - Chemical composition form of wrought products Part 3:
3/13/2025 - PDF - English - BSI
Learn More€24.00 -
25/30506403 DC:2025
BS EN 602 Aluminium and aluminium alloys - Wrought products. Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff
3/13/2025 - PDF - English - BSI
Learn More€24.00 -
NBN ISO 8353:2025
Steel sheet, zinc-aluminium-magnesium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities
3/11/2025 - PDF - English - NBN
Learn More€124.00 -
BS EN ISO 9351:2025 + Redline
Tracked Changes. Galvanic anodes for cathodic protection in seawater and saline sediments
3/10/2025 - PDF - English - BSI
Learn More€491.00 -
BS EN 14361:2025
Aluminium and aluminium alloys. Chemical analysis. Sampling from metal melts
3/7/2025 - PDF - English - BSI
Learn More€191.00 -
25/30469260 DC:2025
BS ISO 19691 Measurement method of corrosion for weathering steel structures
3/7/2025 - PDF - English - BSI
Learn More€24.00 -
ISO/DIS 19691:2025
Measurement method of corrosion for weathering steel structures
3/7/2025 - Papier - English - ISO
Learn More€75.00 -
25/30473193 DC:2025
BS ISO 20198 Metallic materials. Steel. Method of test for the determination of brittle crack arrest temperature (CAT)
3/6/2025 - PDF - English - BSI
Learn More€24.00 -
ISO/DIS 20198:2025
Metallic materials — Steel — Method of test for the determination of brittle crack arrest temperature (CAT)
3/6/2025 - Papier - English - ISO
Learn More€75.00 -
NBN EN ISO 8407:2021/A1:2025
Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens - Amendment 1 (ISO 8407:2021/Amd 1:2025)
3/6/2025 - - - NBN
Learn More€20.00 -
BS EN ISO 8407:2021+A1:2025
Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
3/6/2025 - PDF - English - BSI
Learn More€191.00 -
25/30491983 DC:2025
BS ISO 25018 Corrosion of metals and alloys - Determination of resistance to stress corrosion cracking of copper and copper-zinc alloys in ammonia vapour
3/6/2025 - PDF - English - BSI
Learn More€24.00 -
ISO/DIS 25018:2025
Corrosion of metals and alloys — Determination of resistance to stress corrosion cracking of copper and copper-zinc alloys in ammonia vapour
3/6/2025 - Papier - English - ISO
Learn More€75.00 -
NBN EN 14361:2025
Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
3/6/2025 - - - NBN
Learn More€58.00 -
ISO/DIS 14577-6:2025
Metallic materials — Instrumented indentation test for hardness and materials parameters
3/5/2025 - Papier - English - ISO
Learn More€75.00 -
UNE-EN ISO 9227:2023/A1:2025
Corrosion tests in artificial atmospheres - Salt spray tests - Amendment 1: Footnote of warning (ISO 9227:2022/Amd 1:2024)
3/5/2025 - - - AENOR
Learn MoreFrom: €35.00 -
BS EN ISO 23779:2025 + Redline
Tracked Changes. Shot blasting machinery. Safety and environmental requirements
3/4/2025 - PDF - English - BSI
Learn More€438.00 -
BS EN 10080:2005
Steel for the reinforcement of concrete. Weldable reinforcing steel. General
3/3/2025 - PDF - English - BSI
Learn More€399.00 -
DIN EN ISO 10280:2025-03
Steel and iron - Determination of titanium content - Diantipyrylmethane spectrometric method (ISO/DIS 10280:2025), German and English version prEN ISO 10280:2025
3/1/2025 - PDF - English, German - DIN
Learn More€82.15 -
ASTM A941-25a
Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
3/1/2025 - PDF - English - ASTM
Learn More€69.00 -
ASTM A941-25a + Redline
Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
3/1/2025 - PDF - English - ASTM
Learn More€83.00 -
NF EN 14361, A06-591 (03/2025)
Aluminium et alliages d'aluminium - Analyse chimique - Échantillonnage du métal fondu
3/1/2025 - Papier - French - AFNOR
Learn More€56.50 -
DIN/TR 2388:2025-03
Commonly used steels and aluminium alloys specified in harmonized European standards for use in hydrogen applications, Text in German and English
3/1/2025 - PDF - English, German - DIN
Learn More€43.74 -
DIN EN ISO 6892-2:2025-03
Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO/DIS 6892-2:2025), German and English version prEN ISO 6892-2:2025
3/1/2025 - PDF - English, German - DIN
Learn More€95.42 -
DIN EN 602:2025-03
Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff, German and English version prEN 602:2025
3/1/2025 - PDF - English, German - DIN
Learn More€47.38 -
XP CEN ISO/TS 6892-5, A03-001-5 (03/2025)
Matériaux métalliques - Essais de traction - Partie 5 : spécifications pour l'utilisation d'éprouvettes d'essai miniaturisées
3/1/2025 - Papier - French - AFNOR
Learn More€56.50 -
PR NF EN ISO 6892-2, A03-001-2PR (03/2025)
Matériaux métalliques - Essai de traction - Partie 2 : méthode d'essai à température élevée
3/1/2025 - Papier - English, French - AFNOR
Learn More€100.50 -
NF EN ISO 8407/A1, A05-108/A1 (03/2025)
Corrosion des métaux et alliages - Élimination des produits de corrosion sur les éprouvettes d'essai de corrosion - Amendement 1
3/1/2025 - Papier - French - AFNOR
Learn More€24.00 -
PR NF EN 10253-3, A49-170-3PR (03/2025)
Raccords à souder bout à bout - Partie 3 : Aciers inoxydables austénitiques et austéno-ferritiques (duplex) sans contrôle spécifique
3/1/2025 - Papier - English, French - AFNOR
Learn More€147.50 -
ASTM A493-25
Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
3/1/2025 - PDF - English - ASTM
Learn More€61.00 -
ASTM A493-25 + Redline
Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
3/1/2025 - PDF - English - ASTM
Learn More€73.00 -
ASTM A965/A965M-25
Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
3/1/2025 - PDF - English - ASTM
Learn More€69.00 -
ASTM A965/A965M-25 + Redline
Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
3/1/2025 - PDF - English - ASTM
Learn More€83.00 -
ASTM A774/A774M-25
Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
3/1/2025 - PDF - English - ASTM
Learn More€61.00 -
ASTM A774/A774M-25 + Redline
Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
3/1/2025 - PDF - English - ASTM
Learn More€73.00 -
PR NF ISO 19919, A06-214PR (03/2025)
Joaillerie, bijouterie et métaux précieux - Dosage de l'argent - Méthode par ICP-OES utilisant un étalon interne
3/1/2025 - Papier - English, French - AFNOR
Learn More€66.50 -
ASTM A560/A560M-25
Standard Specification for Castings, Chromium-Nickel Alloy
3/1/2025 - PDF - English - ASTM
Learn More€61.00 -
ASTM A560/A560M-25 + Redline
Standard Specification for Castings, Chromium-Nickel Alloy
3/1/2025 - PDF - English - ASTM
Learn More€73.00 -
DIN 17864:2025-03
Titanium and titanium wrought alloys forgings (hammer and drop forgings) - Technical specification
3/1/2025 - PDF - German - DIN
Learn More€95.42 -
ASTM A240/A240M-25
Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
3/1/2025 - PDF - English - ASTM
Learn More€76.00 -
ASTM A240/A240M-25 + Redline
Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
3/1/2025 - PDF - English - ASTM
Learn More€91.00 -
ASTM A516/A516M-25
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
3/1/2025 - PDF - English - ASTM
Learn More€61.00 -
ASTM A516/A516M-25 + Redline
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
3/1/2025 - PDF - English - ASTM
Learn More€73.00 -
PR NF EN ISO 3953, A95-112PR (03/2025)
Poudres métalliques - Détermination de la masse volumique après tassement
3/1/2025 - Papier - English, French - AFNOR
Learn More€58.00 -
ASTM A599/A599M-25
Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
3/1/2025 - PDF - English - ASTM
Learn More€61.00 -
ASTM A599/A599M-25 + Redline
Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
3/1/2025 - PDF - English - ASTM
Learn More€73.00 -
ASTM A568/A568M-25
Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
3/1/2025 - PDF - English - ASTM
Learn More€99.00 -
ASTM A568/A568M-25 + Redline
Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
3/1/2025 - PDF - English - ASTM
Learn More€119.00 -
NF EN 15698-2, E39-017-2 (03/2025)
Tuyaux de chauffage urbain - Systèmes bloqués de bitubes pour les réseaux d'eau chaude enterrés directement - Partie 2 : assemblages de raccords et d'appareils de robinetterie manufacturés pour tubes de service en acier, isolation thermique en polyuréthane et tube de protection en polyéthylène
3/1/2025 - Papier - French - AFNOR
Learn More€70.50 -
PR NF EN 10253-1, A49-170-1PR (03/2025)
Raccords à souder bout à bout - Partie 1: Acier au carbone pour usages généraux et sans contrôle spécifique
3/1/2025 - Papier - English, French - AFNOR
Learn More€111.00 -
ASTM A1091/A1091M-25
Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
3/1/2025 - PDF - English - ASTM
Learn More€69.00 -
ASTM A1091/A1091M-25 + Redline
Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
3/1/2025 - PDF - English - ASTM
Learn More€83.00 -
ASTM A426/A426M-25
Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
3/1/2025 - PDF - English - ASTM
Learn More€69.00 -
ASTM A426/A426M-25 + Redline
Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
3/1/2025 - PDF - English - ASTM
Learn More€83.00 -
ASTM A788/A788M-25
Standard Specification for Steel Forgings, General Requirements
3/1/2025 - PDF - English - ASTM
Learn More€76.00 -
ASTM A788/A788M-25 + Redline
Standard Specification for Steel Forgings, General Requirements
3/1/2025 - PDF - English - ASTM
Learn More€91.00 -
ASTM A915/A915M-25
Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
3/1/2025 - PDF - English - ASTM
Learn More€61.00 -
ASTM A915/A915M-25 + Redline
Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
3/1/2025 - PDF - English - ASTM
Learn More€73.00 -
25/30488278 DC:2025
Draft NA to BS EN 1999-1-3:2023, Eurocode 9. Design of aluminium structures Structures susceptible fatigue
2/28/2025 - PDF - English - BSI
Learn More€24.00 -
ISO/DIS 21055:2025
Corrosion of metals and alloys — Test method for microbiologically influenced corrosion of oil and gas transmission pipelines
2/28/2025 - Papier - English - ISO
Learn More€75.00 -
BS EN ISO 9351:2025
Galvanic anodes for cathodic protection in seawater and saline sediments
2/28/2025 - PDF - English - BSI
Learn More€351.00 -
25/30474659 DC:2025
BS ISO 21055 Corrosion of metals and alloys — Test method for microbiologically influenced corrosion of oil and gas transmission pipelines
2/28/2025 - PDF - English - BSI
Learn More€24.00 -
BS ISO 14811:2025
Ultra-low carbon high boron steel wire rod for copper cladded wire
2/28/2025 - PDF - English - BSI
Learn More€162.00 -
NBN EN ISO 9351:2025
Galvanic anodes for cathodic protection in seawater and saline sediments (ISO 9351:2025)
2/27/2025 - - - NBN
Learn More€166.00 -
25/30495951 DC:2025
BS ISO 14993 Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions
2/27/2025 - PDF - English - BSI
Learn More€24.00 -
ISO/DIS 14993:2025
Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions
2/27/2025 - - - ISO
Learn More€75.00 -
ISO/DIS 23296:2025
Metallic materials – Fatigue testing – Force controlled thermo-mechanical fatigue testing method
2/26/2025 - Papier - English - ISO
Learn More€75.00 -
ISO 14811:2025
Ultra-low carbon high boron steel wire rod for copper cladded wire
2/26/2025 - Papier - English - ISO
Learn More€49.00 -
PD CEN ISO/TS 6892-5:2025
Metallic materials. Tensile testing Specification for miniaturised test pieces
2/21/2025 - PDF - English - BSI
Learn More€191.00 -
ISO 8407:2021/Amd 1:2025
Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
2/21/2025 - - - ISO
Learn More€21.00 -
€191.00 -
25/30482076 DC:2025
BS EN ISO 10280 Steel and iron — Determination of titanium content Diantipyrylmethane spectrometric method
2/20/2025 - PDF - English - BSI
Learn More€24.00 -
ISO/DIS 10280:2025
Steel and iron — Determination of titanium content — Diantipyrylmethane spectrometric method
2/20/2025 - - - ISO
Learn More€75.00 -
€89.00
-
CEN ISO/TS 6892-5:2025
Metallic materials - Tensile testing - Part 5: Specification for testing miniaturised test pieces (ISO/TS 6892-5:2025)
2/19/2025 - - - NBN
Learn More€89.00 -
ISO 9351:2025
Galvanic anodes for cathodic protection in seawater and saline sediments
2/19/2025 - - - ISO
Learn More€204.00 -
ASTM B831-25
Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
2/15/2025 - PDF - English - ASTM
Learn More€69.00 -
ASTM B831-25 + Redline
Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
2/15/2025 - PDF - English - ASTM
Learn More€83.00 -
ASTM B769-25
Standard Test Method for Shear Testing of Aluminum Alloys
2/15/2025 - PDF - English - ASTM
Learn More€69.00 -
ASTM B769-25 + Redline
Standard Test Method for Shear Testing of Aluminum Alloys
2/15/2025 - PDF - English - ASTM
Learn More€83.00 -
BS EN ISO 23779:2025
Shot blasting machinery. Safety and environmental requirements
2/14/2025 - PDF - English - BSI
Learn More€312.00 -
NBN EN ISO 23779:2025
Shot blasting machinery - Safety and environmental requirements (ISO 23779:2024)
2/13/2025 - - - NBN
Learn More€58.00 -
UNE-EN 603-2:2025
Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties
2/12/2025 - - - AENOR
Learn MoreFrom: €58.00 -
€75.00
-
€75.00
-
€191.00 -
UNE-EN ISO 11782-2:2009/A1:2025
Corrosion of metals and alloys - Corrosion fatigue testing - Part 2: Crack propagation testing using precracked specimens - Amendment 1 (ISO 11782-2:1998/Amd 1:2024)
2/5/2025 - - - AENOR
Learn MoreFrom: €69.00 -
25/30478465 DC:2025
BS ISO 4967 Steel — Determination of the non-metallic inclusion content Micrographic method
2/5/2025 - PDF - English - BSI
Learn More€24.00 -
ISO/DIS 4967:2025
Steel — Determination of the non-metallic inclusion content — Micrographic method
2/5/2025 - Papier - English - ISO
Learn More€75.00 -
€75.00
-
BS ISO 7692:2025
Ferrotitanium. Determination of titanium content. Titrimetric method
2/4/2025 - PDF - English - BSI
Learn More€191.00 -
€113.00
-
€390.00
-
DIN EN ISO 683-7:2025-02
Heat-treatable steels, alloy steels and free-cutting steels - Part 7: Bright products of non-alloy and alloy steels (ISO 683-7:2023), German version EN ISO 683-7:2024
2/1/2025 - PDF - German - DIN
Learn More€140.93 -
DIN EN 754-2:2025-02
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties, German version EN 754-2:2024
2/1/2025 - PDF - German - DIN
Learn More€102.34 -
ASTM E1820-25
Standard Test Method for Measurement of Fracture Toughness
2/1/2025 - PDF - English - ASTM
Learn More€115.00 -
ASTM E1820-25 + Redline
Standard Test Method for Measurement of Fracture Toughness
2/1/2025 - PDF - English - ASTM
Learn More€138.00 -
NF EN ISO 9351, A91-147 (02/2025)
Anodes galvaniques pour la protection cathodique dans l'eau de mer et les sédiments salins
2/1/2025 - Papier - French - AFNOR
Learn More€111.00 -
DIN EN 10253-3:2025-02
Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements, German and English version prEN 10253-3:2025
2/1/2025 - PDF - English, German - DIN
Learn More€146.26 -
€40.56 -
€54.49 -
ASTM E942-25
Standard Guide for Investigating the Effects of Helium in Irradiated Metals
2/1/2025 - PDF - English - ASTM
Learn More€76.00 -
ASTM E942-25 + Redline
Standard Guide for Investigating the Effects of Helium in Irradiated Metals
2/1/2025 - PDF - English - ASTM
Learn More€91.00 -
ASTM B582-25
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
2/1/2025 - PDF - English - ASTM
Learn More€61.00 -
ASTM B582-25 + Redline
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
2/1/2025 - PDF - English - ASTM
Learn More€73.00 -
DIN EN ISO 3953:2025-02
Metallic powders - Determination of tap density (ISO/DIS 3953:2024), German and English version prEN ISO 3953:2024
2/1/2025 - PDF - English, German - DIN
Learn More€54.49 -
ASTM B331-25
Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
2/1/2025 - PDF - English - ASTM
Learn More€61.00 -
ASTM B331-25 + Redline
Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
2/1/2025 - PDF - English - ASTM
Learn More€73.00 -
ASTM B887-25
Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
2/1/2025 - PDF - English - ASTM
Learn More€61.00 -
ASTM B887-25 + Redline
Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
2/1/2025 - PDF - English - ASTM
Learn More€73.00 -
DIN EN 10253-1:2025-02
Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements, German and English version prEN 10253-1:2025
2/1/2025 - PDF - English, German - DIN
Learn More€108.13 -
ASTM B462-25
Standard Specification for Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service
2/1/2025 - PDF - English - ASTM
Learn More€69.00 -
ASTM B462-25 + Redline
Standard Specification for Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service
2/1/2025 - PDF - English - ASTM
Learn More€83.00 -
ASTM B708-25
Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
2/1/2025 - PDF - English - ASTM
Learn More€69.00 -
ASTM B708-25 + Redline
Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
2/1/2025 - PDF - English - ASTM
Learn More€83.00 -
ASTM B386/B386M-25
Standard Specification for Molybdenum and Molybdenum Alloy Plate,Sheet, Strip, Foil, and Ribbon
2/1/2025 - PDF - English - ASTM
Learn More€69.00 -
ASTM B386/B386M-25 + Redline
Standard Specification for Molybdenum and Molybdenum Alloy Plate,Sheet, Strip, Foil, and Ribbon
2/1/2025 - PDF - English - ASTM
Learn More€83.00 -
ASTM B521-25
Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
2/1/2025 - PDF - English - ASTM
Learn More€69.00 -
ASTM B521-25 + Redline
Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
2/1/2025 - PDF - English - ASTM
Learn More€83.00 -
NF EN ISO 23779, E63-705 (02/2025)
Équipements de grenaillage - Exigences de sécurité et d'environnement
2/1/2025 - Papier - French - AFNOR
Learn More€100.50 -
DIN EN 10265:2025-02
Magnetics materials - Specification for electrical steel strip and sheet with specified mechanical properties and magnetic polarisation, German version EN 10265:2024
2/1/2025 - PDF - German - DIN
Learn More€82.15 -
PR NF P34-401-3, P34-401-3PR (02/2025)
Tôles d'acier nervurées galvanisées prélaquées ou non - Caractéristiques dimensionnelles - Partie 3 : bardage et couverture
2/1/2025 - Papier - French - AFNOR
Learn More€46.50 -
€70.50
-
DIN EN 10216-2:2025-02
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties, German version EN 10216-2:2024
2/1/2025 - PDF - German - DIN
Learn More€135.89 -
25/30480811 DC:2025
BS EN ISO 6892-2 Metallic materials — Tensile testing Part 2: Method of test at elevated temperature
1/31/2025 - PDF - English - BSI
Learn More€24.00 -
€75.00
-
BS EN 683-2:2024
Aluminium and aluminium alloys. Finstock Mechanical properties
1/30/2025 - PDF - English - BSI
Learn More€191.00 -
25/30464931 DC:2025
BS ISO 18726 Assessment, prevention, and repair for steel corrosion in reinforced concrete structures
1/30/2025 - PDF - English - BSI
Learn More€24.00 -
ISO/DIS 18726:2025
Assessment, prevention, and repair for steel corrosion in reinforced concrete structures
1/30/2025 - Papier - English - ISO
Learn More€75.00 -
ISO 377:2017/DAmd 1:2025
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
1/29/2025 - Papier - French - ISO
Learn More€21.00 -
From: €77.00
-
UNE-EN ISO 10062:2023/A1:2025
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) - Amendment 1: Footnote of warning (ISO 10062:2022/Amd 1:2024)
1/29/2025 - - - AENOR
Learn MoreFrom: €35.00 -
€58.00
