53 : Materials handling equipment
-
PD CEN/TS 17471:2024
Cranes. Loader cranes. Interface between loader cranes and work platforms
3/15/2024 - PDF - English - BSI
Learn More€151.00 -
24/30443608 DC:2024
EN 1993-6 Eurocode 3. Design of steel structures. Part 6: Crane supporting structures
3/14/2024 - PDF - English - BSI
Learn More€24.00 -
€43.00
-
CEN/TS 17471:2024
Appareils de levage à charge suspendue - Grues de chargement - Interface entre les grues de chargement et les plates-formes de travail
3/13/2024 - PDF - French - NBN
Learn More€58.00 -
CEN/TS 17471:2024
Cranes - Loader cranes - Interface between loader cranes and work platforms
3/13/2024 - PDF - English - NBN
Learn More€58.00 -
UNE-EN ISO 3691-4:2024
Industrial trucks - Safety requirements and verification - Part 4: Driverless industrial trucks and their systems (ISO 3691-4:2023)
3/13/2024 - PDF - Spanish - AENOR
Learn More€130.00 -
UNE-EN ISO 3691-4:2024
Industrial trucks - Safety requirements and verification - Part 4: Driverless industrial trucks and their systems (ISO 3691-4:2023)
3/13/2024 - PDF - English - AENOR
Learn More€156.00 -
€138.00
-
€165.60
-
24/30473332 DC:2024
Vehicle lifts Installation, maintenance, thorough examination and safe use. Code of practice
3/11/2024 - PDF - English - BSI
Learn More€24.00 -
DIN EN 1991-3:2024-03
Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machinery, German and English version prEN 1991-3:2024
3/1/2024 - PDF - English, German - DIN
Learn More€126.26 -
€43.00
-
DIN EN ISO 23308-1:2024-03
Energy efficiency of industrial trucks - Test methods - Part 1: General (ISO/DIS 23308-1:2024), German and English version prEN ISO 23308-1:2024
3/1/2024 - PDF - English, German - DIN
Learn More€92.62 -
DIN EN ISO 23308-2:2024-03
Energy efficiency of industrial trucks - Test methods - Part 2: Operator controlled self propelled trucks, towing and burden carrier trucks (ISO/DIS 23308-2:2024), German and English version prEN ISO 23308-2:2024
3/1/2024 - PDF - English, German - DIN
Learn More€65.89 -
DIN EN ISO 23308-3:2024-03
Energy efficiency of industrial trucks - Test methods - Part 3: Container handling lift trucks (ISO/DIS 23308-3:2024), German and English version prEN ISO 23308-3:2024
3/1/2024 - PDF - English, German - DIN
Learn More€52.90 -
DIN EN ISO 23308-6:2024-03
Energy efficiency of industrial trucks - Test methods - Part 6: Container straddle carrier (ISO/DIS 23308-6:2024), German and English version prEN ISO 23308-6:2024
3/1/2024 - PDF - English, German - DIN
Learn More€52.90 -
PR NF EN ISO 19014-4, E58-083-4PR (03/2024)
Engins de terrassement - Sécurité fonctionnelle - Partie 4: Conception et évaluation du logiciel et de la transmission des données pour les parties relatives à la sécurité du système de commande
3/1/2024 - Paper - English, French - AFNOR
Learn More€125.00 -
NBN ISO 7021:2024
Earth-moving machinery and machinery for forestry — Operator protective structures — Material performance requirements ISO 7021:2023
2/29/2024 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 6011:2024
Engins de terrassement — Affichage visuel des fonctions de l'engin ISO 6011:2023
2/29/2024 - PDF - French - NBN
Learn More€89.00 -
NBN ISO 6011:2024
Earth-moving machinery — Visual display of machine operation ISO 6011:2023
2/29/2024 - PDF - English - NBN
Learn More€89.00 -
24/30464574 DC:2024
BS EN ISO 23308-1 Energy efficiency of industrial trucks — Test methods Part 1: General
2/26/2024 - PDF - English - BSI
Learn More€24.00 -
24/30449656 DC:2024
BS ISO 16625 Cranes and hoists — Selection of wire ropes, drums and sheaves
2/23/2024 - PDF - English - BSI
Learn More€24.00 -
€377.00
-
24/30464578 DC:2024
BS EN ISO 23308-2 Energy efficiency of industrial trucks — Test methods Part 2: Operator controlled self propelled trucks, towing and burden carrier
2/20/2024 - PDF - English - BSI
Learn More€24.00 -
24/30464582 DC:2024
BS EN ISO 23308-3 Energy efficiency of industrial trucks — Test methods Part 3: Container handling lift
2/20/2024 - PDF - English - BSI
Learn More€24.00 -
24/30469688 DC:2024
BS EN ISO 23308-6 Energy efficiency of industrial trucks — Test methods Part 6: Container straddle carrier
2/20/2024 - PDF - English - BSI
Learn More€24.00 -
PD ISO/TR 6750-2:2024 + Redline
Tracked Changes. Earth-moving machinery. Operator's manual List of references
2/14/2024 - PDF - English - BSI
Learn More€197.00 -
PD ISO/TR 6750-2:2024
Earth-moving machinery. Operator's manual List of references
2/7/2024 - PDF - English - BSI
Learn More€151.00 -
DIN EN 1993-6:2024-02
Eurocode 3 - Design of steel structures - Part 6: Crane supporting structures, German and English version prEN 1993-6:2024
2/1/2024 - PDF - English, German - DIN
Learn More€163.74 -
DIN EN ISO 340:2024-02
Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2022), German version EN ISO 340:2022
2/1/2024 - PDF - German - DIN
Learn More€65.89 -
FD ISO/TR 6750-2, E58-065-2 (02/2024)
Engins de terrassement - Manuel de l'opérateur - Partie 2 : liste de références
2/1/2024 - Paper - French - AFNOR
Learn More€48.00 -
PR NF ISO 10326-3, E90-451-3PR (02/2024)
Vibrations mécaniques - Méthode en laboratoire pour l'évaluation des vibrations du siège de véhicule - Partie 3 : spécifications des mannequins dynamiques pour le mouvement dans l'axe z
2/1/2024 - Paper - English, French - AFNOR
Learn More€107.50 -
UNE 311002:2024
Entertainment industry. Code of practice for the use of equipment for lifting and suspending loads on stages and other production areas
1/31/2024 - PDF - Spanish - AENOR
Learn More€100.00 -
UNE-EN 280-2:2024
Mobile elevating work platforms - Part 2: Additional safety requirements for load lifting appliances on the extending lifting structure and work platform
1/31/2024 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 280-2:2024
Mobile elevating work platforms - Part 2: Additional safety requirements for load lifting appliances on the extending lifting structure and work platform
1/31/2024 - PDF - English - AENOR
Learn More€81.60 -
24/30481310 DC:2024
BS EN ISO 19014-1 Earth-moving machinery - Functional safety Part 1: Methodology to determine safety-related parts of the control system and performance requirements
1/26/2024 - PDF - English - BSI
Learn More€24.00 -
24/30483144 DC:2024
BS EN ISO 19014-2 Earth-moving machinery - Functional safety Part 2: Design and evaluation of hardware architecture requirements for safety-related parts the control system
1/26/2024 - PDF - English - BSI
Learn More€24.00 -
24/30483150 DC:2024
BS EN ISO 19014-4 Earth-moving machinery - Functional safety Part 4: Design and evaluation of software data transmission for safety-related parts the control system
1/26/2024 - PDF - English - BSI
Learn More€24.00 -
BS EN 1755:2024 + Redline
Tracked Changes. Industrial trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres
1/22/2024 - PDF - English - BSI
Learn More€454.00 -
BS EN 1755:2024
Industrial trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres
1/16/2024 - PDF - English - BSI
Learn More€348.00 -
24/30453309 DC:2024
BS ISO 11886 Drilling and foundation machinery - Soil or soil and rock mixture drilling and foundation machines - Commercial specifications
1/11/2024 - PDF - English - BSI
Learn More€43.00 -
NBN EN 1755:2024
Chariots de manutention - Prescriptions de sécurité et vérification - Prescriptions supplémentaires pour le fonctionnement en atmosphères explosibles
1/10/2024 - PDF - French - NBN
Learn More€184.00 -
NBN EN 1755:2024
Industrial trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
1/10/2024 - PDF - English - NBN
Learn More€184.00 -
NBN EN 1755:2024
Flurförderzeuge - Sicherheitsanforderungen und Verifizierung - Zusätzliche Anforderungen für den Einsatz in explosionsgefährdeten Bereichen
1/10/2024 - PDF - German - NBN
Learn More€184.00 -
BS EN 16307-5:2023 + Redline
Tracked Changes. Industrial trucks. Safety requirements and verification Supplementary for pedestrianpropelled trucks
1/10/2024 - PDF - English - BSI
Learn More€235.00 -
BS EN 16307-5:2023
Industrial trucks. Safety requirements and verification Supplementary for pedestrianpropelled trucks
1/3/2024 - PDF - English - BSI
Learn More€180.00 -
PR NF EN 1009-2/A1, E58-550-2/A1PR (01/2024)
Machines pour le traitement mécanique des minéraux et des matières solides similaires - Sécurité - Partie 2 : Prescriptions spécifiques pour les machines d'alimentation et équipements de manutention continue
1/1/2024 - Paper - English, French - AFNOR
Learn More€56.00 -
NF EN 1755, H96-334 (01/2024)
Chariots de manutention - Prescriptions de sécurité et vérification - Prescriptions supplémentaires pour le fonctionnement en atmosphères explosibles
1/1/2024 - Paper - French - AFNOR
Learn More€119.00 -
PR NF EN 1009-1/A1, E58-550-1/A1PR (01/2024)
Machines pour le traitement mécanique des minéraux et des matières solides similaires - Sécurité - Partie 1 : Prescriptions communes pour les machines et installations pour le traitement des matériaux
1/1/2024 - Paper - English, French - AFNOR
Learn More€64.50 -
PR NF EN 1009-3/A1, E58-550-3/A1PR (01/2024)
Machines pour le traitement mécanique des minéraux et des matières solides similaires - Sécurité - Partie 3 : prescriptions spécifiques pour les machines de concassage et de broyage
1/1/2024 - Paper - English, French - AFNOR
Learn More€45.00 -
PR NF EN 1009-4/A1, E58-550-4/A1PR (01/2024)
Machines pour le traitement mécanique des minéraux et des matières solides similaires - Sécurité - Partie 4 : Prescriptions spécifiques pour machines de criblage
1/1/2024 - Paper - English, French - AFNOR
Learn More€56.00 -
PR NF EN 1009-5/A1, E58-550-5/A1PR (01/2024)
Machines pour le traitement mécanique des minéraux et des matières solides similaires - Sécurité - Partie 5 : prescriptions spécifiques pour machines de nettoyage, de recyclage et de traitement des boues
1/1/2024 - Paper - English, French - AFNOR
Learn More€56.00 -
PR NF ISO 13031/A1, E58-085/A1PR (01/2024)
Engins de terrassement - Attaches rapides - Sécurité - Amendement 1
1/1/2024 - Paper - English, French - AFNOR
Learn More€45.00 -
€139.00
-
€166.80
-
NBN EN 16307-5:2023
Chariots de manutention - Exigences de sécurité et vérification - Partie 5 : Exigences supplémentaires pour les chariots à conducteur accompagnant
12/21/2023 - PDF - French - NBN
Learn More€89.00 -
NBN EN 16307-5:2023
Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
12/21/2023 - PDF - English - NBN
Learn More€89.00 -
NBN EN 16307-5:2023
Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5: Zusätzliche Anforderungen für mitgängerbetriebene Flurförderzeuge
12/21/2023 - PDF - German - NBN
Learn More€89.00 -
NBN ISO 21815-3:2023
Earth-moving machinery — Collision warning and avoidance — Part 3: Risk area and risk level for forward/reverse motion ISO 21815-3:2023
12/19/2023 - PDF - English - NBN
Learn More€184.00 -
23/30478439 DC:2023
Draft BS ISO 10571 Tyres for mobile cranes and similar specialized machines
12/18/2023 - PDF - English - BSI
Learn More€24.00 -
23/30469243 DC:2023
Draft BS ISO 23285 Agricultural machinery, tractors, and earthmoving machinery. Safety of electrical and electronic components and systems operating at 32 to 75 VDC and 21 to 50 VAC
12/18/2023 - PDF - English - BSI
Learn More€24.00 -
BS ISO 6011:2023
Earth-moving machinery. Visual display of machine operation
12/8/2023 - PDF - English - BSI
Learn More€180.00 -
NF EN 16307-5, H96-305-5 (12/2023)
Chariots de manutention - Exigences de sécurité et vérification - Partie 5 : exigences supplémentaires pour les chariots à conducteur accompagnant
12/1/2023 - Paper - French - AFNOR
Learn More€60.67 -
DIN EN ISO 3691-4:2023-12
Industrial trucks - Safety requirements and verification - Part 4: Driverless industrial trucks and their systems (ISO 3691-4:2023), German version EN ISO 3691-4:2023
12/1/2023 - PDF - German - DIN
Learn More€201.96 -
€24.00
-
UNE-EN 13411-3:2023
Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing
11/22/2023 - PDF - Spanish - AENOR
Learn More€73.00 -
UNE-EN 13411-3:2023
Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing
11/22/2023 - PDF - English - AENOR
Learn More€87.60 -
BS ISO 7021:2023
Earth-moving machinery and machinery for forestry. Operator protective structures. Material performance requirements
11/20/2023 - PDF - English - BSI
Learn More€151.00 -
UNE-EN 16307-2:2023
Industrial trucks - Safety requirements and verification - Part 2: Supplementary requirements for self-propelled variable-reach trucks
11/15/2023 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN 16307-2:2023
Industrial trucks - Safety requirements and verification - Part 2: Supplementary requirements for self-propelled variable-reach trucks
11/15/2023 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN 16307-3:2023
Industrial trucks - Safety requirements and verification - Part 3: Supplementary requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (additional requirements to EN 16307-1)
11/15/2023 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN 16307-3:2023
Industrial trucks - Safety requirements and verification - Part 3: Supplementary requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (additional requirements to EN 16307-1)
11/15/2023 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN ISO 3691-2:2023
Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks (ISO 3691-2:2023)
11/15/2023 - PDF - Spanish - AENOR
Learn More€104.00 -
UNE-EN ISO 3691-2:2023
Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks (ISO 3691-2:2023)
11/15/2023 - PDF - English - AENOR
Learn More€124.80 -
UNE-EN ISO 3691-3:2017/A1:2023
Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads - Amendment 1 (ISO 3691 3:2016/Amd 1:2023)
11/15/2023 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 3691-3:2017/A1:2023
Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads - Amendment 1 (ISO 3691 3:2016/Amd 1:2023)
11/15/2023 - PDF - English - AENOR
Learn More€62.40 -
23/30451031 DC:2023
ISO 13031:2016/DAmd 1 Earth-moving machinery. Quick couplers. Safety
11/14/2023 - PDF - English - BSI
Learn More€24.00 -
23/30453960 DC:2023
BS ISO 9374-4. Cranes. Information to be provided Part 4. Jib cranes
11/2/2023 - PDF - English - BSI
Learn More€24.00 -
23/30482673 DC:2023
BS ISO 9374-4.2. Cranes. Information to be provided Part 4. Jib cranes
11/2/2023 - PDF - English - BSI
Learn More€24.00 -
DIN EN 16307-2:2023-11
Industrial trucks - Safety requirements and verification - Part 2: Supplementary requirements for self-propelled variable-reach trucks, German version EN 16307-2:2023
11/1/2023 - PDF - German - DIN
Learn More€65.89 -
DIN EN ISO 3691-2:2023-11
Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks (ISO 3691-2:2023), German version EN ISO 3691-2:2023.
11/1/2023 - PDF - German - DIN
Learn More€136.82 -
DIN EN ISO 3691-3:2023-11
Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (ISO 3691-3:2016 + Amd 1:2023), German version EN ISO 3691-3:2016 + A1:2023.
11/1/2023 - PDF - German - DIN
Learn More€85.79 -
DIN EN 16307-3:2023-11
Industrial trucks - Safety requirements and verification - Part 3: Supplementary requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (additional requirements to EN 16307-1), German version EN 16307-3:2023
11/1/2023 - PDF - German - DIN
Learn More€52.90 -
ASTM G143-23
Standard Test Method for Measurement of Web/Roller Friction Characteristics
11/1/2023 - PDF - English - ASTM
Learn More€60.00 -
ASTM G143-23 + Redline
Standard Test Method for Measurement of Web/Roller Friction Characteristics
11/1/2023 - PDF - English - ASTM
Learn More€71.00 -
DIN 6660:2023-11
Pneumatic tube systems - Conveyor tube, conveyor tube bend and sleeves for pneumatic tube lines of unplasticized polyvinylchloride (PVC-U)
11/1/2023 - PDF - German - DIN
Learn More€52.90 -
NF ISO 6011, E58-059 (11/2023)
Engins de terrassement - Affichage visuel des fonctions de l'engin
11/1/2023 - Paper - French - AFNOR
Learn More€60.67 -
23/30453963 DC:2023
BS ISO 9374-1. Cranes. Information to be provided Part 1. General
10/11/2023 - PDF - English - BSI
Learn More€24.00 -
€86.00
-
23/30451377 DC:2023
BS ISO 23814. Cranes. Competency requirements for crane inspectors
10/3/2023 - PDF - English - BSI
Learn More€24.00 -
DIN ISO 6055:2023-10
Industrial trucks - Overhead guards - Specification and testing (ISO 6055:2023), Text in German and English
10/1/2023 - PDF - English, German - DIN
Learn More€72.80 -
DIN CEN/TR 17838:2023-10
Use of plugs of bulk material in screw conveyors and product receivers for explosion isolation, German version CEN/TR 17838:2022
10/1/2023 - PDF - German - DIN
Learn More€68.60 -
DIN EN ISO 22721:2023-10
Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2023), German version EN ISO 22721:2023
10/1/2023 - PDF - German - DIN
Learn More€79.72 -
BS EN 474-8:2022 + Redline
Tracked Changes. Earth-moving machinery. Safety Requirements for graders
9/26/2023 - PDF - English - BSI
Learn More€326.00 -
€518.00
-
€24.00
-
UNE-EN ISO 22721:2023
Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2023) (Endorsed by Asociación Española de Normalización in September of 2023.)
9/18/2023 - PDF - English - AENOR
Learn More€63.00 -
€24.00
-
DIN EN 13001-3-6:2023-09
Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders, German version EN 13001-3-6:2018+A1:2021
9/1/2023 - PDF - German - DIN
Learn More€136.82 -
PR NF EN 12077-2, E52-021PR (09/2023)
Sécurité des appareils de levage à charge suspendue - Prescriptions relatives à l'hygiène et à la sécurité - Partie 2 : dispositifs limiteurs et indicateurs
9/1/2023 - Paper - English, French - AFNOR
Learn More€80.50 -
PR NF ISO 10896-8, H96-326-8PR (09/2023)
Chariots tout-terrain - Exigences de sécurité et vérifications - Partie 8 : exigences pour les chariots conçus pour tracter
9/1/2023 - Paper - English, French - AFNOR
Learn More€97.50 -
DIN 15207-1:2023-09
Continuous mechanical handling equipment - Main dimensions of idlers for belt conveyors for bulk material
9/1/2023 - PDF - German - DIN
Learn More€52.90 -
NBN ISO 22915-10:2023
Chariots de manutention — Vérification de la stabilité — Partie 10: Essai de stabilité supplémentaire pour les chariots travaillant dans des conditions de gerbage spéciales avec la charge décentrée latéralement par des dispositifs à moteur ISO 22915-10:2023
8/24/2023 - PDF - French - NBN
Learn More€37.00 -
NBN ISO 22915-10:2023
Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices ISO 22915-10:2023
8/24/2023 - PDF - English - NBN
Learn More€37.00 -
NBN ISO 22915-20:2023
Chariots de manutention — Vérification de la stabilité — Partie 20: Essai de stabilité supplémentaire pour les chariots travaillant dans des conditions de gerbage spéciales avec une charge déportée, déport par utilisation ISO 22915-20:2023
8/24/2023 - PDF - French - NBN
Learn More€37.00 -
NBN ISO 22915-20:2023
Industrial trucks — Verification of stability — Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization ISO 22915-20:2023
8/24/2023 - PDF - English - NBN
Learn More€37.00 -
NBN ISO 6055:2023
Chariots de manutention — Protège-conducteurs — Spécifications et essais ISO 6055:2023
8/23/2023 - PDF - French - NBN
Learn More€89.00 -
NBN ISO 6055:2023
Industrial trucks — Overhead guards — Specification and testing ISO 6055:2023
8/23/2023 - PDF - English - NBN
Learn More€89.00 -
BS ISO 21815-3:2023
Earth-moving machinery. Collision warning and avoidance Risk area risk level for forward/reverse motion
8/11/2023 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 22721:2023 + Redline
Tracked Changes. Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining
8/8/2023 - PDF - English - BSI
Learn More€235.00 -
23/30467343 DC:2023
BS EN 12077-2. Cranes safety. Requirements for health and safety Part 2. Limiting indicating devices
8/7/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 22721:2023
Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining
8/4/2023 - PDF - English - BSI
Learn More€180.00 -
23/30461912 DC:2023
BS EN 17988-3. Circular design of fishing gear and aquaculture equipment Part 3. Technical requirements
8/3/2023 - PDF - English - BSI
Learn More€24.00 -
23/30462537 DC:2023
BS EN 17988-5. Circular design of fishing gear and aquaculture equipment Part 5. business model
8/3/2023 - PDF - English - BSI
Learn More€24.00 -
23/30462540 DC:2023
BS EN 17988-4. Circular design of fishing gear and aquaculture equipment Part 4. Environmental circularity requirements guidelines
8/3/2023 - PDF - English - BSI
Learn More€24.00 -
23/30464885 DC:2023
BS EN 17988-6. Circular design of fishing gear and aquaculture equipment Part 6. Digitalization components
8/3/2023 - PDF - English - BSI
Learn More€24.00 -
23/30472847 DC:2023
BS EN 17988-2. Circular design of fishing gear and aquaculture equipment Part 2. User manual labelling
8/3/2023 - PDF - English - BSI
Learn More€24.00 -
NBN EN ISO 22721:2023
Courroies transporteuses - Spécification pour courroies transporteuses à structure textile recouvertes de caoutchouc ou de plastique, pour utilisation dans les mines souterraines (ISO 22721:2023)
8/2/2023 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 22721:2023
Fördergurte - Anforderungen an Textilfördergurte mit Gummi- oder Kunststoff-Deckplatten für Anwendungen unter Tage (ISO 22721:2023)
8/2/2023 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 22721:2023
Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2023)
8/2/2023 - PDF - English - NBN
Learn More€89.00 -
DIN EN 12077-2:2023-08
Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices, German and English version prEN 12077-2:2023
8/1/2023 - PDF - English, German - DIN
Learn More€72.80 -
NF EN ISO 22721, T47-030 (08/2023)
Courroies transporteuses - Spécification pour courroies transporteuses à structure textile recouvertes de caoutchouc ou de plastique, pour utilisation dans les mines souterraines
8/1/2023 - Paper - French - AFNOR
Learn More€75.67 -
BS EN ISO 3691-4:2023 + Redline
Tracked Changes. Industrial trucks. Safety requirements and verification Driverless industrial trucks their systems
7/27/2023 - PDF - English - BSI
Learn More€492.00 -
23/30464545 DC:2023
BS ISO 10896-8. Rough-terrain trucks. Safety requirements and verification Part 8. Requirements for trucks designed towing
7/26/2023 - PDF - English - BSI
Learn More€24.00 -
UNE-EN 528:2021+A1:2023
Rail dependent storage and retrieval equipment - Safety requirements for S/R machines
7/26/2023 - PDF - Spanish - AENOR
Learn More€136.00 -
UNE-EN 528:2021+A1:2023
Rail dependent storage and retrieval equipment - Safety requirements for S/R machines
7/26/2023 - PDF - English - AENOR
Learn More€163.20 -
BS EN ISO 3691-4:2023
Industrial trucks. Safety requirements and verification Driverless industrial trucks their systems
7/24/2023 - PDF - English - BSI
Learn More€377.00 -
NBN EN ISO 3691-4:2023
Chariots de manutention - Exigences de sécurité et vérification - Partie 4: Chariots sans conducteur et leurs systèmes (ISO 3691-4:2023)
7/19/2023 - PDF - French - NBN
Learn More€184.00 -
NBN EN ISO 3691-4:2023
Industrial trucks - Safety requirements and verification - Part 4: Driverless industrial trucks and their systems (ISO 3691-4:2023)
7/19/2023 - PDF - English - NBN
Learn More€184.00 -
NBN EN ISO 3691-4:2023
Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 4: Fahrerlose Flurförderzeuge und ihre Systeme (ISO 3691-4:2023)
7/19/2023 - PDF - German - NBN
Learn More€184.00 -
IEC 60204-32:2023
IEC 60204-32:2023 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
7/4/2023 - PDF - English, French - IEC
Learn More€460.00 -
IEC 60204-32:2023 CMV
IEC 60204-32:2023 CMV Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
7/4/2023 - PDF - English - IEC
Learn More€787.00 -
NF EN ISO 3691-4, H96-300-4 (07/2023)
Chariots de manutention - Exigences de sécurité et vérification - Partie 4 : chariots sans conducteur et leurs systèmes
7/1/2023 - Paper - French - AFNOR
Learn More€154.67 -
DIN 22100-1:2023-07
Articles and materials from synthetics for use in underground mines - Part 1: Conveyor belts - Hygienic requirements, testing, marking
7/1/2023 - PDF - German - DIN
Learn More€65.89 -
DIN EN ISO 283:2023-07
Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method (ISO 283:2023), German version EN ISO 283:2023
7/1/2023 - PDF - German - DIN
Learn More€72.80 -
€98.00
-
BS ISO 20297-2:2023
Industrial trucks. Lorry-mounted trucks Safe use requirements
6/7/2023 - PDF - English - BSI
Learn More€250.00 -
NF ISO 6055, H96-412 (06/2023)
Chariots de manutention - Protège-conducteurs - Spécifications et essais
6/1/2023 - Paper - French - AFNOR
Learn More€75.67 -
PR NF EN 1459-4/A1, H96-320-4/A1PR (06/2023)
Chariots tout-terrain - Prescriptions de sécurité et vérification - Partie 4 : Prescriptions supplémentaires pour les chariots à portée-variable manutentionnant des charges suspendues à oscillation libre
6/1/2023 - Paper - English, French - AFNOR
Learn More€64.50 -
PR NF EN 1459-1, H96-320-1PR (06/2023)
Chariots tout-terrain - Prescriptions de sécurité et vérification - Partie 1 : Chariots à portée variable
6/1/2023 - Paper - English, French - AFNOR
Learn More€148.00 -
PR NF EN 1459-5/A1, H96-320-5/A1PR (06/2023)
Chariots tout-terrain - Prescriptions de sécurité et vérification - Partie 5 : Interface de l'accessoire
6/1/2023 - Paper - English, French - AFNOR
Learn More€45.00 -
PR NF ISO 5053-3, H96-002-3PR (06/2023)
Chariots de manutention - Vocabulaire - Partie 3 : composants et équipement
6/1/2023 - Paper - English, French - AFNOR
Learn More€148.00 -
DIN EN ISO 583:2023-06
Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods (ISO 583:2023), German version EN ISO 583:2023
6/1/2023 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 252:2023-06
Conveyor belts - Adhesion between constitutive elements - Test methods (ISO 252:2023), German version EN ISO 252:2023
6/1/2023 - PDF - German - DIN
Learn More€59.63 -
DIN 22261-1:2023-06
Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 1: Construction, commissioning and monitoring
6/1/2023 - PDF - German - DIN
Learn More€72.80 -
DIN 22261-2:2023-06
Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 2: Calculation principles
6/1/2023 - PDF - German - DIN
Learn More€201.96 -
DIN 22261-3:2023-06
Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 3: Execution of steel structures
6/1/2023 - PDF - German - DIN
Learn More€126.26 -
DIN 22261-4:2023-06
Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 4: Hoisting winch brakes
6/1/2023 - PDF - German - DIN
Learn More€32.34 -
DIN 22261-5:2023-06
Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 5: Slewing brakes and overload protecting devices
6/1/2023 - PDF - German - DIN
Learn More€39.35 -
DIN 22261-6:2023-06
Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 6: Examination of ropes and rope end fittings
6/1/2023 - PDF - German - DIN
Learn More€39.35 -
PR NF EN 17969, E58-035PR (06/2023)
Engins de terrassement - Sécurité - Systèmes de protection contre la contamination
6/1/2023 - Paper - English, French - AFNOR
Learn More€107.50 -
UNE-EN ISO 252:2023
Conveyor belts - Adhesion between constitutive elements - Test methods (ISO 252:2023) (Endorsed by Asociación Española de Normalización in May of 2023.)
5/5/2023 - PDF - English - AENOR
Learn More€42.00 -
UNE-EN ISO 283:2023
Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method (ISO 283:2023) (Endorsed by Asociación Española de Normalización in May of 2023.)
5/5/2023 - PDF - English - AENOR
Learn More€59.00 -
BS ISO 22915-20:2023 + Redline
Tracked Changes. Industrial trucks. Verification of stability Additional test for trucks operating in the special condition offset load, by utilization
5/2/2023 - PDF - English - BSI
Learn More€197.00 -
BS ISO 22915-10:2023 + Redline
Tracked Changes. Industrial trucks. Verification of stability Additional test for trucks operating in the special condition stacking with load laterally displaced by powered devices
5/2/2023 - PDF - English - BSI
Learn More€197.00 -
PR NF EN 12999/A1, E52-088/A1PR (05/2023)
Appareils de levage à charge suspendue - Grues de chargement
5/1/2023 - Paper - English, French - AFNOR
Learn More€80.50 -
NF ISO 22915-10, H96-316-10 (05/2023)
Chariots de manutention - Vérification de la stabilité - Partie 10 : essai de stabilité supplémentaire pour les chariots travaillant dans des conditions de gerbage spéciales avec la charge décentrée latéralement par des dispositifs à moteur
5/1/2023 - Paper - French - AFNOR
Learn More€48.00 -
NF ISO 22915-20, H96-316-20 (05/2023)
Chariots de manutention - Vérification de la stabilité - Partie 20 : essai de stabilité supplémentaire pour les chariots travaillant dans des conditions de gerbage spéciales avec une charge déportée, déport par utilisation
5/1/2023 - Paper - French - AFNOR
Learn More€48.00 -
DIN EN 1459-5/A1:2023-05
Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface, German and English version EN 1459-5:2020/prA1:2023
5/1/2023 - PDF - English, German - DIN
Learn More€39.35 -
DIN EN 1459-1:2023-05
Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks, German and English version prEN 1459-1:2023
5/1/2023 - PDF - English, German - DIN
Learn More€152.71 -
DIN EN 1459-4/A1:2023-05
Rough-terrain trucks - Safety requirements and verification - Part 4: Additional requirements for variable-reach trucks handling freely suspended loads, German and English version EN 1459-4:2020/prA1:2023
5/1/2023 - PDF - English, German - DIN
Learn More€52.90 -
DIN EN 13155/A1:2023-05
Cranes - Safety - Non-fixed load lifting attachments, German and English version EN 13155:2020/prA1:2023
5/1/2023 - PDF - English, German - DIN
Learn More€65.89 -
PR NF EN 13155/A1, E52-091/A1PR (05/2023)
Appareils de levage à charge suspendue - Sécurité - Accessoires de levage amovibles
5/1/2023 - Paper - English, French - AFNOR
Learn More€64.50 -
UNE-EN 280-1:2023
Mobile elevating work platforms - Part 1: Design calculations - Stability criteria - Construction - Safety - Examinations and tests
4/26/2023 - PDF - Spanish - AENOR
Learn More€153.00 -
UNE-EN 280-1:2023
Mobile elevating work platforms - Part 1: Design calculations - Stability criteria - Construction - Safety - Examinations and tests
4/26/2023 - PDF - English - AENOR
Learn More€183.60 -
UNE-EN ISO 583:2023
Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods (ISO 583:2023) (Endorsed by Asociación Española de Normalización in April of 2023.)
4/21/2023 - PDF - English - AENOR
Learn More€59.00 -
23/30455145 DC:2023
BS EN 1459-4 AMD 1. Rough-terrain trucks. Safety requirements and verification Part 4. Additional for variable-reach trucks handling freely suspended loads
4/21/2023 - PDF - English - BSI
Learn More€24.00 -
23/30455148 DC:2023
BS EN 1459-5 AMD 1. Rough-terrain trucks. Safety requirements and verification Part 5. Attachment interface
4/21/2023 - PDF - English - BSI
Learn More€24.00 -
23/30455151 DC:2023
BS EN 1459-1. Rough-terrain trucks. Safety requirements and verification Part 1. Variable-reach trucks
4/20/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 283:2023 + Redline
Tracked Changes. Textile conveyor belts. Full thickness tensile strength, elongation at break and elongation at the reference load. Test method
4/20/2023 - PDF - English - BSI
Learn More€235.00 -
23/30459152 DC:2023
BS EN 17969. Earth-moving machinery. Safety. Contamination protective systems
4/20/2023 - PDF - English - BSI
Learn More€24.00 -
23/30434670 DC:2023
BS ISO 5053-3. Industrial trucks. Vocabulary Part 3. Accessories and Components
4/14/2023 - PDF - English - BSI
Learn More€43.00 -
BS EN ISO 283:2023
Textile conveyor belts. Full thickness tensile strength, elongation at break and elongation at the reference load. Test method
4/14/2023 - PDF - English - BSI
Learn More€180.00 -
BS ISO 6055:2023 + Redline
Tracked Changes. Industrial trucks. Overhead guards. Specification and testing
4/13/2023 - PDF - English - BSI
Learn More€235.00 -
NBN EN ISO 283:2023
Courroies transporteuses à carcasse textile - Résistance à la traction, allongement à la rupture et allongement sous force de référence en pleine épaisseur - Méthode d'essai (ISO 283:2023)
4/12/2023 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 283:2023
Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method (ISO 283:2023)
4/12/2023 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 283:2023
Textilfördergurte - Zugfestigkeit bei voller Gurtdicke, Bruchdehnung und Dehnung bei Bezugslast - Prüfverfahren (ISO 283:2023)
4/12/2023 - PDF - German - NBN
Learn More€58.00 -
NBN ISO 12509:2023
Engins de terrassement et chariots tout-terrain — Feux d'éclairage, de signalisation, de position et d'encombrement, et catadioptres ISO 12509:2023
4/12/2023 - PDF - French - NBN
Learn More€184.00 -
NBN ISO 12509:2023
Earth-moving machinery and rough-terrain trucks — Lighting, signalling and marking lights, and reflex reflectors ISO 12509:2023
4/12/2023 - PDF - English - NBN
Learn More€184.00 -
UNE-EN ISO 6165:2023
Earth-moving machinery - Basic types - Identification and vocabulary (ISO 6165:2022)
4/12/2023 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 6165:2023
Earth-moving machinery - Basic types - Identification and vocabulary (ISO 6165:2022)
4/12/2023 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 1756-1:2023
Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods
4/12/2023 - PDF - Spanish - AENOR
Learn More€126.00 -
UNE-EN 1756-1:2023
Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods
4/12/2023 - PDF - English - AENOR
Learn More€151.20 -
BS ISO 6055:2023
Industrial trucks. Overhead guards. Specification and testing
4/11/2023 - PDF - English - BSI
Learn More€180.00 -
€24.00
-
BS ISO 22915-10:2023
Industrial trucks. Verification of stability Additional test for trucks operating in the special condition stacking with load laterally displaced by powered devices
4/3/2023 - PDF - English - BSI
Learn More€151.00 -
BS ISO 22915-20:2023
Industrial trucks. Verification of stability Additional test for trucks operating in the special condition offset load, by utilization
4/3/2023 - PDF - English - BSI
Learn More€151.00 -
23/30439514 DC:2023
BS ISO 16368. Mobile elevating work platforms. Design, calculations, safety requirements and test methods
4/3/2023 - PDF - English - BSI
Learn More€43.00 -
DIN EN 12999/A1:2023-04
Cranes - Loader cranes, German and English version EN 12999:2020/prA1:2023
4/1/2023 - PDF - English, German - DIN
Learn More€72.80 -
PR NF ISO 22915-1, H96-316-1PR (04/2023)
Chariots de manutention - Vérification de la stabilité - Partie 1 : généralités
4/1/2023 - Paper - English, French - AFNOR
Learn More€74.00 -
NF EN ISO 283, T47-102 (04/2023)
Courroies transporteuses à carcasse textile - Résistance à la traction, allongement à la rupture et allongement sous force de référence en pleine épaisseur - Méthode d'essai
4/1/2023 - Paper - French - AFNOR
Learn More€60.67 -
DIN EN 17969:2023-04
Earth-moving machinery - Safety - Contamination protective systems, German and English version prEN 17969:2023
4/1/2023 - PDF - English, German - DIN
Learn More€104.95 -
€153.50
-
NF ISO 12509, E58-111 (04/2023)
Engins de terrassement et chariots tout-terrain - Feux d'éclairage, de signalisation, de position et d'encombrement, et catadioptres
4/1/2023 - Paper - French - AFNOR
Learn More€130.67 -
€184.58
-
23/30439183 DC:2023
BS EN 13155 AMD 1. Cranes. Safety. Non-fixed load lifting attachments
3/31/2023 - PDF - English - BSI
Learn More€24.00 -
23/30457395 DC:2023
BS ISO 18893. Mobile elevating work platforms. Safety principles, inspection, maintenance and operation
3/28/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 252:2023
Conveyor belts. Adhesion between constitutive elements. Test methods
3/24/2023 - PDF - English - BSI
Learn More€151.00 -
NBN EN ISO 252:2023
Courroies transporteuses - Adhérence entre éléments constitutifs - Méthodes d'essai (ISO 252:2023)
3/22/2023 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 252:2023
Conveyor belts - Adhesion between constitutive elements - Test methods (ISO 252:2023)
3/22/2023 - PDF - English - NBN
Learn More€37.00