49.035 : Components for aerospace construction
-
BS EN 4905:2023 + Redline
Tracked Changes. Aerospace series. Passive UHF RFID for airborne use
11/10/2023 - PDF - English - BSI
Learn More€326.00 -
€250.00 -
BS EN 4906:2023
Aerospace series. Embedded tags. Choice of fixation for installation, removal and replacement of embedded tags
10/30/2023 - PDF - English - BSI
Learn More€293.00 -
BS EN 4880:2023
Aerospace series. General technical specification for standard parts
8/23/2023 - PDF - English - BSI
Learn More€151.00 -
23/30477043 DC:2023
BS EN 2588. Aerospace series. Bearing, spherical plain in corrosion resisting steel with assembly slots. Dimensions and loads
7/13/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 4614:2021 + Redline
Tracked Changes. Aerospace series. Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series. Dimensions and loads. Inch series
5/26/2023 - PDF - English - BSI
Learn More€235.00 -
23/30469204 DC:2023
BS EN 4530-004. Aerospace series. Sealing sleeves used in elements of connection Part 004. for external diameter cable 3 mm to 5,8 mm. Product standard
5/17/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 4708-201:2022
Aerospace series. Sleeves, heat-shrinkable, for binding, insulation and identification Polyolefin sleeves. Operating Temperature range -55 °C to 135 °C. Product standard
1/16/2023 - PDF - English - BSI
Learn More€180.00 -
BS EN 4708-203:2022
Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification polyvinylidene fluoride (PVDF) Identification sleeves. Operating Temperature range -55ºC to 225ºC. Product Standard
1/11/2023 - PDF - English - BSI
Learn More€151.00 -
22/30460226 DC:2022
BS EN 4906. Aerospace series. Embedded tags. Choice of fixation for installation, removal and replacement of embedded tags
8/25/2022 - PDF - English - BSI
Learn More€24.00 -
22/30461460 DC:2022
BS EN 4905. Aerospace series. Passive UHF RFID for airborne use
8/25/2022 - PDF - English - BSI
Learn More€24.00 -
€449.00 -
PD CEN/TR 17603-32-25:2022
Space engineering. Mechanical shock design and verification handbook
8/9/2022 - PDF - English - BSI
Learn More€449.00 -
PD CEN/TR 17603-32-26:2022
Space engineering. Spacecraft mechanical loads analysis handbook
8/9/2022 - PDF - English - BSI
Learn More€449.00 -
BS EN 4841-1:2022
Aerospace series. Shock mount with bushes Technical specification
7/8/2022 - PDF - English - BSI
Learn More€250.00 -
BS EN 4841-2:2022
Aerospace series. Shock mount with bushes Technical overview
6/20/2022 - PDF - English - BSI
Learn More€180.00 -
BS EN 4613:2021 + Redline
Tracked Changes. Aerospace series. Spherical plain bearing in corrosion resisting steel with self-lubricating liner, narrow series. Dimensions and loads. Inch series
2/9/2022 - PDF - English - BSI
Learn More€235.00 -
BS EN 2755:2021 + Redline
Tracked Changes. Aerospace series. Bearing, spherical, plain in corrosion resisting steel with self-lubricating liner. Elevated load at ambient temperature. Technical specification
1/20/2022 - PDF - English - BSI
Learn More€432.00 -
BS EN 2755:2021
Aerospace series. Bearing, spherical, plain in corrosion resisting steel with self-lubricating liner. Elevated load at ambient temperature. Technical specification
11/23/2021 - PDF - English - BSI
Learn More€331.00 -
BS EN 4614:2021
Aerospace series. Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series. Dimensions and loads. Inch series
11/1/2021 - PDF - English - BSI
Learn More€180.00 -
BS EN 4613:2021
Aerospace series. Spherical plain bearing in corrosion resisting steel with self-lubricating liner, narrow series. Dimensions and loads. Inch series
10/28/2021 - PDF - English - BSI
Learn More€180.00 -
BS EN 6099:2021
Aerospace series. Rod-end, spherical, plain bearing, metal to metal. Technical specification
8/13/2021 - PDF - English - BSI
Learn More€250.00 -
BS EN 4035:2021
Aerospace series. Rod end, adjustable, with self-aligning double row ball bearing, in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy. Dimensions and loads
3/18/2021 - PDF - English - BSI
Learn More€151.00 -
BS EN 4036:2021
Aerospace series. Rod end, adjustable, with self-aligning double row ball bearing and threaded shank, in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads
3/16/2021 - PDF - English - BSI
Learn More€151.00 -
BS EN 6057:2020
Aerospace series. Rod-end with bearing EN 4265 in corrosion resisting steel, internal threaded shank. Dimensions and loads, Inch series
11/3/2020 - PDF - English - BSI
Learn More€180.00 -
20/30427533 DC:2020
BS EN 4157. Aerospace series. Rod end, with self-aligning double row ball bearings and threaded shank in steel. Dimensions and loads, Inch series
10/2/2020 - PDF - English - BSI
Learn More€24.00 -
19/30398513 DC:2020
BS EN 4157. Aerospace series. Rod end, with self-aligning double row ball bearing and threaded shank in steel. Dimensions and loads, Inch series
9/24/2020 - PDF - English - BSI
Learn More€24.00 -
20/30412751 DC:2020
BS EN 4880. Aerospace series. General technical specification for standard parts
8/27/2020 - PDF - English - BSI
Learn More€24.00 -
20/30426552 DC:2020
BS EN 4880. Aerospace series. General technical specification for standard parts
8/27/2020 - PDF - English - BSI
Learn More€24.00 -
BS EN 6046:2020
Aerospace series. Bearing, spherical, plain, in corrosion resisting steel. Narrow series. Dimensions and loads. Inch series
3/30/2020 - PDF - English - BSI
Learn More€180.00 -
BS EN 4710-01:2018 + Redline
Tracked Changes. Aerospace series. Quick release fastening systems for non-structural applications Technical specification
2/27/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN 4710-03:2018 + Redline
Tracked Changes. Aerospace series. Quick release fastening systems for non-structural applications Spring clamp
2/27/2020 - PDF - English - BSI
Learn More€197.00 -
BS EN 4535-2:2016 + Redline
Tracked Changes. Aerospace series. Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load Dimensions and loads. Inch series
2/26/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN 4854-3:2019
Aerospace series. Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and friction coefficient, elevated duty cycles under oscillations at different operating conditions Technical specification
11/4/2019 - PDF - English - BSI
Learn More€331.00 -
BS EN 4539-2:2019
Aerospace series. Bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner. Elevated load under low oscillations. Wide Dimensions and loads Inch series
11/4/2019 - PDF - English - BSI
Learn More€151.00 -
BS EN 4854-2:2019
Aerospace series. Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and friction coefficient, elevated duty cycles under oscillations at different operating conditions, wide series Dimensions loads
10/31/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN 4854-1:2019
Aerospace series. Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and friction coefficient, elevated duty cycles under oscillations at different operating conditions, narrow series Dimensions loads for
10/30/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN 6055:2019
Aerospace series. Rod-end with bearing EN 4265 in corrosion resisting steel, external threaded shank. Dimensions and loads. Inch series
5/10/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN 6056:2019
Aerospace series. Rod-end with bearing per EN 4614 with self lubricating liner in corrosion resisting steel with external threaded shank. Dimensions and loads. Inch series
5/10/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN 6098:2019
Aerospace series. Rod-end with bearing per EN 6097 in corrosion resisting steel, extra wide inner ring, external threaded shank. Dimensions and loads. Inch series
5/10/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN 6096:2019
Aerospace series. Bearing, spherical plain with self-lubricating liner, extra wide inner ring in corrosion resisting steel. Dimensions and loads. Inch series
5/10/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN 6133:2019
Aerospace series. Rod-end, with bearing per EN 6096, with self-lubricating liner in corrosion resisting steel, extra wide inner ring, external threaded shank. Dimensions and loads. Inch series
5/10/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN 6097:2019
Aerospace series. Bearing, spherical plain, metal to metal, extra wide inner ring in corrosion resisting steel. Dimensions and loads. Inch series
5/9/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN 2584:2019
Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Narrow series. Elevated load at ambient temperature. Dimensions and loads
3/13/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN 2585:2019
Aerospace series. Bearing, spherical plain in corrosion resisting steel with self-lubricating liner. Wide series. Elevated load at ambient temperature. Dimensions and loads
3/6/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN 2379:2018
Aerospace series. Fluids for assessment of non-metallic materials
11/22/2018 - PDF - English - BSI
Learn More€151.00 -
BS EN 4710-01:2018
Aerospace series. Quick release fastening systems for non-structural applications Technical specification
11/9/2018 - PDF - English - BSI
Learn More€180.00 -
BS EN 4710-03:2018
Aerospace series. Quick release fastening systems for non-structural applications Spring clamp
11/9/2018 - PDF - English - BSI
Learn More€151.00 -
BS EN 4832:2018
Aerospace series. Adaptor, Pipe coupling 24° Cone up to 35 000 kPa (5 080 psi) Ring-locked fitting and Ring-locked fitting-reducer. Inch Series. Technical specification
10/18/2018 - PDF - English - BSI
Learn More€250.00 -
18/30377547 DC:2018
BS EN 4614. Aerospace series. Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, wide series. Dimensions and loads. Inch series
5/10/2018 - PDF - English - BSI
Learn More€24.00 -
BS EN 4691-2:2018
Aerospace series. Tie rod with integrated bolts Overview construction kit
1/26/2018 - PDF - English - BSI
Learn More€180.00 -
BS EN 4702-03:2017
Aerospace series. Quick release fastening systems for non-structural and lining applications Stud - quick-release locking
10/25/2017 - PDF - English - BSI
Learn More€180.00 -
BS EN 4702-05:2017
Aerospace series. Quick release fastening systems for non-structural and lining applications Retaining washer
10/25/2017 - PDF - English - BSI
Learn More€151.00 -
BS EN 4691-1:2017
Aerospace series. Tie rod with integrated bolts Technical specification
10/25/2017 - PDF - English - BSI
Learn More€348.00 -
BS EN 4693:2017
Aerospace series. Tie rod with integrated bolts. Assembly code A, B and C
10/24/2017 - PDF - English - BSI
Learn More€250.00 -
BS EN 4702-02:2017
Aerospace series. Quick release fastening systems for non-structural and lining applications Spring clamp stud combination
10/20/2017 - PDF - English - BSI
Learn More€151.00 -
BS EN 4702-04:2017
Aerospace series. Quick release fastening systems for non-structural and lining applications Spring clamp
10/20/2017 - PDF - English - BSI
Learn More€151.00 -
BS EN 4692:2017
Aerospace series. Tie Rod with integrated bolts. Locking clip
10/20/2017 - PDF - English - BSI
Learn More€180.00 -
BS EN 4694:2017
Aerospace series. Tie rod with integrated bolts. Assembly code D, E and F
10/20/2017 - PDF - English - BSI
Learn More€250.00 -
BS EN 4695:2017
Aerospace series. Tie Rod with integrated bolts. Assembly Code G, H and K
10/20/2017 - PDF - English - BSI
Learn More€180.00 -
BS EN 6075:2017
Aerospace series. Static seal elements O-Ring ethylene- propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C). Inch series
10/19/2017 - PDF - English - BSI
Learn More€180.00 -
BS EN 6076:2017
Aerospace series. Static seal elements O-Ring for straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (-55 °C to 107 °C). Inch series
7/10/2017 - PDF - English - BSI
Learn More€151.00 -
BS EN 2311:2017
Aerospace series. Bushes with self-lubricating liner. Technical specification
4/30/2017 - PDF - English - BSI
Learn More€250.00 -
BS EN 3908:2017
Aerospace series. Nipples, lubricating, axial type, in corrosion resisting steel, passivated
1/31/2017 - PDF - English - BSI
Learn More€180.00 -
BS EN 6029:2017
Aerospace series. Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel. Dimensions and loads. Inch series
1/31/2017 - PDF - English - BSI
Learn More€151.00 -
16/30351607 DC:2016
BS EN 6097. Aerospace series. Bearing spherical plain metal to metal extra wide inner ring in corrosion resisting steel. Dimensions and loads. Inch series
11/11/2016 - PDF - English - BSI
Learn More€24.00 -
BS EN 4534-2:2016
Aerospace series. Bushes, plain in aluminium alloy with self-lubricating liner, elevated load Dimensions and loads. Inch series
9/30/2016 - PDF - English - BSI
Learn More€180.00 -
BS EN 4535-2:2016
Aerospace series. Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load Dimensions and loads. Inch series
9/30/2016 - PDF - English - BSI
Learn More€250.00 -
BS EN 4710-02:2015
Aerospace series. Quick release fastening systems for non-structural applications Spring clamp stud combination
10/31/2015 - PDF - English - BSI
Learn More€151.00 -
BS EN 4710-04:2015
Aerospace series. Quick release fastening systems for non-structural applications Spring clamp. One way tolerance compensation
10/31/2015 - PDF - English - BSI
Learn More€151.00 -
BS EN 4710-05:2015
Aerospace series. Quick release fastening systems for non-structural applications Spring clamp. Two ways tolerance compensation
10/31/2015 - PDF - English - BSI
Learn More€151.00 -
BS EN 4710-06:2015
Aerospace series. Quick release fastening systems for non-structural applications Stud. Quick-release and locking
10/31/2015 - PDF - English - BSI
Learn More€151.00 -
BS EN 4710-07:2015
Aerospace series. Quick release fastening systems for non-structural applications Retaining grommet
10/31/2015 - PDF - English - BSI
Learn More€151.00 -
BS SP 33-39:1951+A5:2015
Specifications for turnbarrels, tension rods and swaged cable-end connections for aircraft
10/31/2015 - PDF - English - BSI
Learn More€250.00 -
BS 4T 45:1972+A2:2015
Specification for carbon manganese steel tube (700 MPa) (Tube 12.5 mm outside diameter and greater) (Weldable)
9/30/2015 - PDF - English - BSI
Learn More€180.00 -
BS 2SP 101-104:1956+A3:2015
Specifications for turnbarrels, tension rods and swaged cable-end connections (Unified threads),* cadmium plated, for aircraft
7/31/2015 - PDF - English - BSI
Learn More€180.00 -
BS SP 51 and 52:1953+A3:2012
Specifications for identification tags for swaged cable-end assemblies. For aircraft
1/31/2015 - PDF - English - BSI
Learn More€151.00 -
BS 2SP 91-92:1973+A4:2015
Specification for carbon steel worm drive clamps for aircraft
1/31/2015 - PDF - English - BSI
Learn More€180.00 -
BS EN 4538-2:2014
Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Narrow Dimensions and loads Inch series
7/31/2014 - PDF - English - BSI
Learn More€151.00 -
14/30301120 DC:2014
BS EN 4677-001. Aerospace series. Welded and brazed assemblies for aerospace constructions. Joints of metallic materials by electron beam welding. Part 001. Quality of welded assemblies
4/14/2014 - PDF - English - BSI
Learn More€24.00 -
BS W 13:1973+A1:2014
Specification for preformed corrosion-resisting steel wire rope (ISO diameters and strengths)
3/31/2014 - PDF - English - BSI
Learn More€151.00 -
BS EN 4156:2013
Aerospace series. Rod ends, with self-aligning double row ball bearings and threaded shank in steel. Inner ring and balls in corrosion resisting steel. Dimensions and loads. Inch series
12/31/2013 - PDF - English - BSI
Learn More€180.00 -
€250.00 -
€293.00 -
BS EN 4266:2013
Aerospace series. Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated. Wide series. Dimensions and loads. Inch series
4/30/2013 - PDF - English - BSI
Learn More€180.00 -
BS T 78:1997+A1:2013
Specification for 2½ % nickel-chromium-molybdenum steel tubes (1390Mpa)
4/30/2013 - PDF - English - BSI
Learn More€151.00 -
BS T 79:1997+A1:2013
Specification for 2 ½% nickel-chromium-molybdenum steel tubes (1160 MPa)
4/30/2013 - PDF - English - BSI
Learn More€151.00 -
BS T 80:1997+A1:2013
Specification for 12 % chromium corrosion-resisting steel tubes (770 MPa)
4/30/2013 - PDF - English - BSI
Learn More€151.00 -
BS EN 4265:2013
Aerospace series. Bearing spherical plain, metal to metal in corrosion resisting steel. Wide series. Dimensions and loads. Inch series
1/31/2013 - PDF - English - BSI
Learn More€180.00 -
BS EN 4677-001:2012
Aerospace series. Welded and brazed assemblies for aerospace construction. Joints of metallic materials by electron beam welding Quality welded
8/31/2012 - PDF - English - BSI
Learn More€293.00 -
BS SP 49 and BS SP 50:1953+A1:2012
Specifications for Ball ends for swaging on cable. For aircraft (Suitable for 5 cwt. cable)
8/31/2012 - PDF - English - BSI
Learn More€151.00 -
BS SP 119-120:1957+A2:2012
High tensile steel fork joints (Unified threads). For aircraft
8/31/2012 - PDF - English - BSI
Learn More€151.00 -
BS EN 4818:2012
Aerospace series. Passive HF RFID tags intended for aircraft use
5/31/2012 - PDF - English - BSI
Learn More€180.00 -
BS EN 4819:2012
Aerospace series. Contact Memory Button (CMB) tags intended for aircraft use
5/31/2012 - PDF - English - BSI
Learn More€151.00 -
BS EN 3182:2012
Aerospace series. Ball bearings, rigid in corrosion resisting steel cadmium plated, for control cable pulleys. Dimensions and loads
4/30/2012 - PDF - English - BSI
Learn More€151.00 -
12/30263035 DC:2012
BS EN 4825. Aerospace series. Steel X12CrNiMoV12-3 (1.4933). Air melted and consumable electrode remelted. Hardened and tempered. Bar. De = 150 mm. 900 MPa = Rm = 1100 MPa
4/5/2012 - PDF - English - BSI
Learn More€24.00 -
BS EN 4540:2011
Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Technical specification
1/31/2012 - PDF - English - BSI
Learn More€293.00 -
BS EN 3280:2011
Aerospace series. Bearings, airframe rolling, rigid or self-aligning. Technical specification
5/31/2011 - PDF - English - BSI
Learn More€293.00 -
BS 3HR 401:2011
Specification for nickel-chromium-titanium-aluminium heat-resisting alloy seamless tubes (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)
1/31/2011 - PDF - English - BSI
Learn More€151.00 -
BS 2HR 402:2011
Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy seamless tubes (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
1/31/2011 - PDF - English - BSI
Learn More€151.00 -
BS 2HR 403:2011 (R2016)
Specification for nickel-chromium-titanium heat-resisting alloy seamless tubes (Nickel base, Cr 19.5, Ti 0.4)
1/31/2011 - PDF - English - BSI
Learn More€151.00 -
BS 2HR 404:2011 (R2016)
Specification for nickel-cobalt-chromium-molybdenum- titanium-aluminium heat-resisting alloy seamless tubes (Nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
1/31/2011 - PDF - English - BSI
Learn More€151.00 -
BS EN 4538-003:2010
Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Narrow Dimensions and loads Inch series friction coefficient
11/30/2010 - PDF - English - BSI
Learn More€180.00 -
BS EN 4539-003:2010
Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Wide Dimensions and loads Inch series friction coefficient
11/30/2010 - PDF - English - BSI
Learn More€180.00 -
BS 5T 100:2010 (R2015)
Aerospace series. Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock
3/31/2010 - PDF - English - BSI
Learn More€293.00 -
BS EN 4662:2010
Aerospace series. Test specification for vibration control components
3/31/2010 - PDF - English - BSI
Learn More€151.00 -
BS EN 4536-2:2009
Aerospace series. Bushes, plain in corrosion-resisting steel with self-lubricating liner, elevated load Dimensions and loads. Inch series
7/31/2009 - PDF - English - BSI
Learn More€180.00 -
BS EN 4537-2:2009
Aerospace series. Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load Dimensions and loads. Inch series
7/31/2009 - PDF - English - BSI
Learn More€180.00 -
€151.00 -
BS EN 3059:2007
Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated. Dimensions and loads
7/31/2007 - PDF - English - BSI
Learn More€151.00 -
BS EN 3060:2007
Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated. Dimensions and loads
7/31/2007 - PDF - English - BSI
Learn More€151.00 -
BS EN 4033:2007
Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 8 and 9, reduced internal radial clearance. Dimensions and loads
7/31/2007 - PDF - English - BSI
Learn More€151.00 -
BS EN 4034:2007
Aerospace series. Bearings, airframe rolling. Double row self-aligning ball bearings with flanged outer ring in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads
7/31/2007 - PDF - English - BSI
Learn More€151.00 -
BS EN 3061:2007
Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing. Dimensions and loads
7/31/2007 - PDF - English - BSI
Learn More€151.00 -
BS EN 2335:2005
Aerospace series. Bearings, spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads
12/29/2006 - PDF - English - BSI
Learn More€151.00 -
BS EN 2337:2006
Aerospace series. Spherical plain bearings. Technical specification
6/30/2006 - PDF - English - BSI
Learn More€250.00 -
BS EN 2588:2006
Aerospace series. Bearings, spherical plain in corrosion resisting steel with assembly slots. Dimensions and loads
6/30/2006 - PDF - English - BSI
Learn More€151.00 -
BS EN 3727:2006
Aerospace series. Bearings, airframe rolling rigid with flanged alignment housing. Technical specification
6/30/2006 - PDF - English - BSI
Learn More€293.00 -
BS EN 4041:2006
Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel, with extended inner ring and flanged alignment bush. Dimensions and loads
6/30/2006 - PDF - English - BSI
Learn More€151.00 -
BS EN 4424:2006
Aerospace series. Rod-ends, adjustable single fork and threaded shank with engagement: 1,5 x thread diameter in titanium alloys. Dimensions and loads
6/30/2006 - PDF - English - BSI
Learn More€151.00 -
BS EN 4198:2006
Aerospace series. Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel. Dimensions and loads
6/30/2006 - PDF - English - BSI
Learn More€151.00 -
BS EN 4040:2006
Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring. Elevated loads at ambient temperature. Dimensions and loads
5/31/2006 - PDF - English - BSI
Learn More€151.00 -
BS EN 2336:2005
Aerospace series. Bearings, spherical plain in steel with assembly slots. Dimensions and loads
1/31/2006 - PDF - English - BSI
Learn More€151.00 -
BS 3SP 168-169:2002
Ferrules and assembly wires for braided rubber cord assemblies for aerospace use
9/27/2002 - PDF - English - BSI
Learn More€151.00 -
€151.00 -
BS EN 2134:2002
Aerospace series. Round bars, extruded in aluminium and aluminium alloys. Diameter 10 mm = D = 220 mm. Dimensions
1/4/2002 - PDF - English - BSI
Learn More€151.00 -
BS EN 2046:2001
Hexagonal bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Width across flats 7 mm = a = 50 mm. Dimensions
12/24/2001 - PDF - English - BSI
Learn More€151.00 -
BS EN 2044:2001
Aerospace series. Round bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Diameter 4 mm = D = 63 mm. Dimensions
12/24/2001 - PDF - English - BSI
Learn More€151.00 -
BS EN 2045:2001
Aerospace series. Square bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Thickness 6 mm = a = 50 mm. Dimensions
12/24/2001 - PDF - English - BSI
Learn More€151.00 -
BS EN 2130:2001
Aerospace series. Bearings, precision ball in corrosion resisting steel for instruments and equipment. Technical specification
11/12/2001 - PDF - English - BSI
Learn More€180.00 -
BS EN 3048:2001
Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Light series. Elevated load at ambient temperature. Dimensions and loads
11/9/2001 - PDF - English - BSI
Learn More€151.00 -
BS EN 3848:2001
Aerospace series. Semi-finished metallic products. Methods of measuring form deviations
10/23/2001 - PDF - English - BSI
Learn More€151.00 -
BS ISO 9760:2000
Aerospace. Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings. Dimensions and loads
5/15/2001 - PDF - English - BSI
Learn More€151.00 -
BS ISO 9749:2000
Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
3/15/2001 - PDF - English - BSI
Learn More€151.00 -
BS ISO 9738:2000
Turnbarrels, for aircraft control wire rope. Dimensions and loads
3/15/2001 - PDF - English - BSI
Learn More€151.00 -
BS ISO 9736:2000
Eye-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope. Dimensions and loads
3/15/2001 - PDF - English - BSI
Learn More€151.00 -
BS ISO 9747:2000
Double shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
3/15/2001 - PDF - English - BSI
Learn More€151.00 -
BS ISO 9737:2000
Eye-ends, in corrosion resisting steel, swaged on aircraft control wire rope. Dimensions and loads
3/15/2001 - PDF - English - BSI
Learn More€151.00 -
BS ISO 9757:2000
Fork-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope turnbarrels. Dimensions and loads
3/15/2001 - PDF - English - BSI
Learn More€151.00 -
BS ISO 9758:2000
Fork-ends, in corrosion-resistant steel, threaded, for rolling bearings, for aircraft control wire rope. Dimensions and loads
3/15/2001 - PDF - English - BSI
Learn More€151.00 -
BS ISO 9759:2000
Fork ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
3/15/2001 - PDF - English - BSI
Learn More€151.00 -
BS ISO 9761:2000
Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles. Dimensions
3/15/2001 - PDF - English - BSI
Learn More€151.00 -
BS ISO 9762:2000
Aircraft control wire rope assemblies. Dimensions and end-fitting combinations
3/15/2001 - PDF - English - BSI
Learn More€151.00 -
BS ISO 9748:2000
Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
3/15/2001 - PDF - English - BSI
Learn More€151.00 -
BS ISO 10955:1999
End-fittings and turnbarrels for aircraft control wire rope. Technical specification
11/15/1999 - PDF - English - BSI
Learn More€180.00 -
BS W 14:1999
Aircraft control wire rope assemblies. Technical specification
10/15/1999 - PDF - English - BSI
Learn More€151.00 -
BS A 328-2:1999
Accessory drives and mounting flanges (Metric sizes) Dimensions
2/15/1999 - PDF - English - BSI
Learn More€180.00 -
BS EN 2290-1:1998
Rod bodies, flight control in aluminium alloy, for adjustable end fittings Dimensions and loads
9/15/1998 - PDF - English - BSI
Learn More€151.00 -
BS EN 2644:1998
Rod assemblies for flight controls. Technical specification
7/15/1998 - PDF - English - BSI
Learn More€151.00 -
BS ISO 2020-1:1997
Aerospace. Preformed flexible steel wire rope for aircraft controls Dimensions and loads
11/15/1997 - PDF - English - BSI
Learn More€151.00 -
BS ISO 2020-2:1997
Aerospace. Preformed flexible steel wire rope for aircraft controls Technical specification
10/15/1997 - PDF - English - BSI
Learn More€180.00 -
€151.00
-
BS EN 2289:1996
Rod bodies in aluminium alloy for flight controls. Technical specification
12/15/1996 - PDF - English - BSI
Learn More€180.00 -
BS EN 2067:1996
Rod ends with self-aligning ball bearings. Technical specification
6/15/1996 - PDF - English - BSI
Learn More€180.00 -
BS EN 2068:1996
Rod ends with self-lubricating self-aligning bearings. Technical specification
6/15/1996 - PDF - English - BSI
Learn More€180.00 -
BS ISO 10792-3:1995
Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner Technical specification
1/15/1996 - PDF - English - BSI
Learn More€250.00 -
BS ISO 10792-1:1995
Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner Metric series
1/15/1996 - PDF - English - BSI
Learn More€151.00 -
BS ISO 10792-2:1995
Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner Inch series
1/15/1996 - PDF - English - BSI
Learn More€180.00 -
BS EN 3446:1995
Bearings, precision ball without flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads
6/15/1995 - PDF - English - BSI
Learn More€180.00 -
BS EN 2079:1995
Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads
4/15/1995 - PDF - English - BSI
Learn More€180.00 -
BS EN 3283:1994
Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 8 and 9. Dimensions and loads
9/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3284:1994
Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 0 and 2. Normal clearance category. Dimensions and loads
9/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3286:1994
Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 0 and 2. Normal clearance category. Dimensions and loads
9/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3287:1994
Bearings, airframe rolling. Double row self-aligning ball bearings in steel. Diameter series 2. Dimensions and loads
9/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3289:1994
Bearings, airframe rolling. Double row self-aligning ball bearings in corrosion resisting steel. Diameter series 2. Dimensions and loads
9/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3290:1994
Bearings, airframe rolling. Single row self-aligning roller bearings in steel. Diameter series 3 and 4. Dimensions and loads
9/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3292:1994
Bearings, airframe rolling. Single row self-aligning roller bearings in corrosion resisting steel. Diameter series 3 and 4. Dimensions and loads
9/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3282:1994
Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 8 and 9. Dimensions and loads
8/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3285:1994
Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 0 and 2. Normal clearance category. Dimensions and loads
8/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3288:1994
Bearings, airframe rolling. Double row self-aligning ball bearings in steel, cadmium plated. Diameter series 2. Dimensions and loads
8/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3291:1994
Bearings, airframe rolling. Single row self-aligning roller bearings in steel, cadmium plated. Diameter series 3 and 4. Dimensions and loads
8/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3281:1994
Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 8 and 9. Dimensions and loads
8/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3055:1994
Bearings, airframe rolling. Single row self-aligning roller bearings in corrosion resisting steel. Dimensions and loads
7/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3056:1994
Bearings, airframe rolling. Rigid double row ball bearings in steel. Dimensions and loads
7/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3057:1994
Bearings, airframe rolling. Rigid double row ball bearings in steel, cadmium plated. Dimensions and loads
7/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3058:1994
Bearings, airframe rolling. Rigid double row ball bearings in corrosion resisting steel. Dimensions and loads
7/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3053:1994
Bearings, airframe rolling. Single row self-aligning roller bearings in steel. Dimensions and loads
7/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3054:1994
Bearings, airframe rolling. Single row self-aligning roller bearings in steel, cadmium plated. Dimensions and loads
7/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3045:1994
Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads
2/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3046:1994
Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads
2/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS EN 3047:1994
Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads
2/15/1994 - PDF - English - BSI
Learn More€151.00 -
€180.00
-
BS EN 2064:1992
Bearings, spherical plain in corrosion resisting steel with self lubricating liner. Technical specification
8/15/1992 - PDF - English - BSI
Learn More€180.00 -
BS EN 2009:1992
Bearings. Airframe rolling rigid, single row ball bearings in steel diameter series 8 and 9. Dimensions and loads
7/15/1992 - PDF - English - BSI
Learn More€151.00 -
BS EN 3541:1992
Rod ends, adjustable, self-aligning ball bearing with threaded shank. Dimensions, torques, clearances and loads
7/15/1992 - PDF - English - BSI
Learn More€151.00 -
BS EN 2501:1992
Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring. Dimensions and loads
6/15/1992 - PDF - English - BSI
Learn More€151.00 -
BS EN 2792:1991
Rod ends, adjustable, double fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads
8/30/1991 - PDF - English - BSI
Learn More€151.00 -
BS EN 2790:1991
Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1.5 thread. Dimensions and loads
8/30/1991 - PDF - English - BSI
Learn More€151.00 -
BS EN 2791:1991
Rod ends, adjustable, single fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads
8/30/1991 - PDF - English - BSI
Learn More€151.00 -
BS 3F 65:1991
Specification for flexible corrugated oxygen and air tubes for aircraft (natural or synthetic polyisoprene)
5/31/1991 - PDF - English - BSI
Learn More€151.00 -
BS EN 2498:1990
Specification for rod ends, adjustable self-aligning plain bearing, with self-lubricating liner and threaded shank. Dimensions and loads
12/31/1990 - PDF - English - BSI
Learn More€151.00 -
BS EN 2587:1990
Specification for rod ends, adjustable double fork and threaded shank. Dimensions and loads
12/31/1990 - PDF - English - BSI
Learn More€151.00 -
BS EN 2515:1990
Specification for rod ends, adjustable single fork and threaded shank. Dimensions and loads
12/31/1990 - PDF - English - BSI
Learn More€151.00 -
BS EN 2022:1990
Specification for bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Light series. Dimensions and loads
9/28/1990 - PDF - English - BSI
Learn More€151.00 -
BS 2M 47:1990
Specification for retreading of cross ply tyres for aircraft
6/29/1990 - PDF - English - BSI
Learn More€180.00 -
BS EN 2014:1989
Specification for bearings. Airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 0 and 2.Dimensions and loads
10/31/1989 - PDF - English - BSI
Learn More€151.00 -
BS EN 2020:1989
Specification for bearings - airframe rolling single row self aligning roller bearings in corrosion resisting steel diameter series 3 and 4. Dimensions and loads
9/29/1989 - PDF - English - BSI
Learn More€151.00 -
BS EN 2015:1989
Specification for bearings - airframe rolling double row, self aligning ball bearings in steel diameter series 2. Dimensions and loads
9/29/1989 - PDF - English - BSI
Learn More€151.00 -
BS EN 2018:1989
Specification for bearings - airframe rolling single row, self aligning roller bearings in steel diameter series 3 and 4. Dimensions and loads
9/29/1989 - PDF - English - BSI
Learn More€151.00 -
BS EN 2011:1989
Specification for bearings. Airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 8 and 9.Dimensions and loads
9/29/1989 - PDF - English - BSI
Learn More€151.00
