49.030 : Fasteners for aerospace construction
-
PR NF EN 6118, L10-220PR (03/2024)
Série aérospatiale - Revêtements IVD d'aluminium purs pour fixations
3/1/2024 - Paper - English, French -
Learn More€64.50 -
PR NF EN 4075, L24-190PR (03/2024)
Série aérospatiale - Vis à tête cylindrique, à empreinte cruciforme déportée, filetée jusqu'à proximité de la tête, en acier résistant à la corrosion, passivée, série métrique - Classification : 490 MPa (à température ambiante)/425 °C
3/1/2024 - Paper - English, French -
Learn More€56.00 -
NF EN 2943, L24-980 (03/2024)
Série aérospatiale - Filet rapporté, filetages MJ et M - Spécification technique
3/1/2024 - Paper - French -
Learn More€68.50 -
PR NF EN 4128, L24-124PR (02/2024)
Série aérospatiale - Vis à tête hexagonale normale, fût à tolérance large, filetage court, en alliage résistant à chaud base nickel, revêtue d'aluminium IVD - Classification : 1 250 MPa (à température ambiante)/425 °C
2/1/2024 - Paper - English, French -
Learn More€56.00 -
PR NF EN 2285, L31-602PR (02/2024)
Série aérospatiale - Bague cylindrique, en alliage d'aluminium, à garniture autolubrifiante - Dimensions et charges
2/1/2024 - Paper - English, French -
Learn More€56.00 -
PR NF EN 2286, L31-603PR (02/2024)
Série aérospatiale - Bague à épaulement, en alliage d'aluminium, à garniture autolubrifiante - Dimensions et charges
2/1/2024 - Paper - English, French -
Learn More€64.50 -
NF EN 2882, L24-516 (11/2023)
Série aérospatiale - Écrou hexagonal, à freinage interne, avec chambrage et rondelle captive, en acier, cadmié, lubrifié au MoS2 - Classification : 1 100 MPa (à température ambiante)/235 °C
11/1/2023 - Paper - French -
Learn More€43.50 -
PR NF EN 6024, L22-000PR (10/2023)
Série aérospatiale - Vis à tête fraisée 100° réduite, à empreinte cruciforme déportée, tige à tolérance serrée, filetage court, en alliage de titane, anodisées, lubrifiées au MoS2 - Classification : 1 100 MPa (à température ambiante)/315 °C - Série en inches
10/1/2023 - Paper - English, French -
Learn More€64.50 -
PR NF EN 4012, L24-667PR (09/2023)
Série aérospatiale - Écrou bihexagonaux, à freinage interne, en alliage résistant à chaud à base de nickel NI-PH2601 (Inconel 718), revêtus MoS2 - Classification : 1 550 MPa (à température ambiante ) / 425 °C
9/1/2023 - Paper - English, French -
Learn More€56.00 -
PR NF EN 4073, L24-174PR (09/2023)
Série aérospatiale - Vis à tête cylindrique, à empreinte six lobes, tige a tolérance large, filetage moyen, en acier allié, cadmiées - Classification: 1 100 MPa (à température ambiente) / 235 °C
9/1/2023 - Paper - English, French -
Learn More€56.00 -
NF EN 2876, L24-525 (09/2023)
Aerospace series - Nuts, hexagon, plain, reduced height, normal across flats, in aluminium alloy, anodized - Classification : 450 MPa (at ambient temperature)/120 °C
9/1/2023 - Paper - French -
Learn More€48.00 -
NF EN 3628, L10-734 (09/2023)
Série aérospatiale - Fils à freiner étirés - Acier résistant à la corrosion
9/1/2023 - Paper - French -
Learn More€34.67 -
€48.00
-
NF EN 4269, L24-493 (07/2023)
Série aérospatiale - Écrous à river, à freinage interne, flottants, double patte, série réduite, avec chambrage, en acier, cadmiés, lubrifiés au MoS2 - Classification: 1 100 MPa (à température ambiante)/235 °C
7/1/2023 - Paper - French -
Learn More€48.00 -
NF EN 3637, L24-236 (07/2023)
Série aérospatiale - Écrou bihexagonal, à freinage interne (double réduit), en alliage résistant à chaud base nickel NI-P101HT (Waspaloy), argenté - Classification : 1 210 MPa/730 °C
7/1/2023 - Paper - French -
Learn More€48.00 -
PR NF EN 3672, L24-679PR (06/2023)
Série aérospatiale - Écrous à sertir, à freinage interne, en alliage résistant à chaud à base de nickel NI-P101HT (Waspaloy), argentés, pour sertissage 30° - Classification: 1 210 MPa (à température ambiante) / 730 °C
6/1/2023 - Paper - French -
Learn More€35.50 -
PR NF EN 2939, NF EN 2939 (E) Prépublié/Prepublished (06/2023)
Série aérospatiale - Vis à tête fraisée 100°, empreinte cruciforme déportée, filetée jusqu'à proximité de la tête, en acier résistant à chaud FE-PA92HT (A286) - Classification : 900 MPa (à température ambiante)/650 °C
6/1/2023 - Paper - English, French -
Learn More€56.00 -
PR NF EN 6050, L21-000PR (05/2023)
Série aérospatiale - Rivet de précision, à bague sertie, à tête fraisée 100° réduite, type cisaillement, en alliage d'aluminium 7050, revêtement de conversion - Série en inches
5/1/2023 - Paper - English, French -
Learn More€56.00 -
PR NF EN 6054, L23-302PR (04/2023)
Série aérospatiale - Bague à sertir, type cisaillement, en alliage d'aluminium 6061, revêtement de conversion - Série en inches
4/1/2023 - Paper - English, French -
Learn More€56.00 -
PR NF EN 4013, L24-686PR (04/2023)
Série aérospatiale - Écrous à sertir, à freinage interne, en alliage résistant à chaud à base de nickel NI-PH2601 (Inconel 718), argentés - Classification : 1 550 MPa (à température ambiante ) / 600 °C
4/1/2023 - Paper - English, French -
Learn More€56.00 -
PR NF EN 3043, L24-111PR (03/2023)
Série aérospatiale - Éléments de fixation à filetage extérieur, en acier résistant à chaud FE-PA92HT (A286) - Classification : 900 MPa/650 °C, mode de fabrication non imposé - Spécification technique
3/1/2023 - Paper - English, French -
Learn More€88.50 -
€60.67
-
NF EN 2886, L24-184 (02/2023)
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification : 900 MPa (at ambient temperature)/235 °C
2/1/2023 - Paper - French -
Learn More€48.00 -
NF EN 2885, L24-183 (02/2023)
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification : 900 MPa (at ambient temperature)/235 °C
2/1/2023 - Paper - French -
Learn More€48.00 -
NF EN 6081, L21-046 (12/2022)
Aerospace series - Rivet, universal head, close tolerance - Inch series
12/1/2022 - Paper - French -
Learn More€60.67 -
NF EN 3434, L24-528 (12/2022)
Série aérospatiale - Écrous hexagonaux à créneaux, à freinage interne, en acier, cadmiés, lubrifiés au MoS2 - Classification : 900 MPa (à température ambiante)/235 °C
12/1/2022 - Paper - French -
Learn More€48.00 -
NF EN 6069, L21-419 (12/2022)
Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series
12/1/2022 - Paper - French -
Learn More€60.67 -
NF EN 6101, L21-111 (12/2022)
Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series
12/1/2022 - Paper - French -
Learn More€60.67 -
NF EN 3762, L11-026 (12/2022)
Série aérospatiale - Alliage résistant à chaud X6NiCrTiMnMoV26-15 (1.4944) - Adouci et écroui - Fils pour éléments de fixation forgés - D inférieur ou égal à 15 mm - 1 100 MPa inférieur ou égal à Rm inférieur ou égal à 1 300 MPa
12/1/2022 - Paper - French -
Learn More€48.00 -
NF EN 6080, L21-045 (12/2022)
Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series
12/1/2022 - Paper - French -
Learn More€60.67 -
NF EN 6052, L21-047 (10/2022)
Série aérospatiale - Système rivet-collier, alliage d'aluminium, type cisaillement, série en inches - Spécification technique
10/1/2022 - Paper - French -
Learn More€75.67 -
NF EN 2287, L31-604 (09/2022)
Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads
9/1/2022 - Paper - French -
Learn More€48.00 -
PR NF EN 3014, L24-684PR (08/2022)
Série aérospatiale - Écrous à sertir, dentelés, à freinage interne, en acier résistant à chaud FE-PA2601 (A286) - Classification : 1 100 MPa (à température ambiante)/650 °C
8/1/2022 - Paper - English, French -
Learn More€56.00 -
PR NF EN 2942, L24-984PR (05/2022)
Série aérospatiale - Filets rapportés, filetages MJ, à freinage interne, entraînement d'insertion à tenon, en alliage résistant à chaud base nickel NI-PH2801 (Inconel X750), argentés
5/1/2022 - Paper - English, French -
Learn More€56.00 -
PR NF EN 4892, L22-016PR (05/2022)
Série aérospatiale - Vis, entraînement extérieur en spirale, tête-embase, application de traction-cisaillement
5/1/2022 - Paper - English, French -
Learn More€80.50 -
NF EN 4849, L22-013 (03/2022)
Série aérospatiale - Vis à tête fraisée normale 100°, empreinte en spirale, tige normale à tolérance large, filetage court, en alliage de titane, revêtue d'aluminium IVD - Classification : 1 100 MPa (à température ambiante)/425 °C
3/1/2022 - Paper - English, French -
Learn More€68.50 -
NF EN 3077, L46-019 (03/2022)
Série aérospatiale - Colliers à vis tangente - Spécification technique
3/1/2022 - Paper - English, French -
Learn More€68.50 -
NF EN 4846, L22-010 (03/2022)
Série aérospatiale - Vis à tête cylindrique, empreinte en spirale, filetée jusqu'à proximité de la tête, en acier résistant à chaud et à la corrosion, passivée - Classification : 1 100 MPa (à température ambiante)/425 °C
3/1/2022 - Paper - English, French -
Learn More€54.50 -
NF EN 4848, L22-012 (03/2022)
Série aérospatiale - Vis à tête cylindrique, empreinte en spirale, tige normale à tolérance large, filetage moyen, en alliage de titane, anodisée, lubrifiée au MoS2 - Classification : 1 100 MPa (à température ambiante)/315 °C
3/1/2022 - Paper - English, French -
Learn More€68.50 -
NF EN 4844, L22-008 (03/2022)
Série aérospatiale - Vis à tête fraisée normale 100°, empreinte en spirale, filetée jusqu'à proximité de la tête, en acier résistant à chaud et à la corrosion, passivée - Classification : 1 100 MPa (à température ambiante)/425 °C
3/1/2022 - Paper - English, French -
Learn More€54.50 -
NF EN 4850, L22-014 (03/2022)
Série aérospatiale - Vis à tête fraisée normale 100°, empreinte en spirale, tige normale à tolérance large, filetage moyen, en acier allié, cadmiée - Classification : 1 100 MPa (à température ambiante)/235 °C
3/1/2022 - Paper - English, French -
Learn More€68.50 -
NF EN 4853, L24-025 (03/2022)
Série aérospatiale - Elément de fixation à filetage extérieur, tête fraisée normale 100°, empreinte en spirale - Classification : 1 100 MPa (à température ambiante)/425 °C
3/1/2022 - Paper - English, French -
Learn More€90.00 -
NF EN 4847, L22-011 (03/2022)
Série aérospatiale - Vis à tête cylindrique, empreinte en spirale, tige normale à tolérance large, filetage moyen, en acier allié, cadmiée - Classification : 1 100 MPa (à température ambiante)/235 °C
3/1/2022 - Paper - English, French -
Learn More€68.50 -
NF EN 3228, L24-522 (03/2022)
Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification : 900 MPa (at ambient temperature)/235 °C
3/1/2022 - Paper - English, French -
Learn More€68.50 -
NF EN 4845, L22-009 (03/2022)
Série aérospatiale - Vis à tête fraisée normale 100°, empreinte en spirale, filetage court, en acier résistant à chaud FE-PA2601 (A286), passivée - Classification : 900 MPa (à température ambiante)/650 °C
3/1/2022 - Paper - English, French -
Learn More€54.50 -
NF EN 4851, L22-015 (03/2022)
Série aérospatiale - Vis à tête fraisée normale 100°, empreinte en spirale, tige normale à tolérance large, filetage long, en acier allié, cadmiée - Classification : 1 100 MPa (à température ambiante)/235 °C
3/1/2022 - Paper - English, French -
Learn More€54.50 -
PR NF EN 3542, L24-98PR (02/2022)
Série aérospatiale - Inserts, filets de vis MJ, bobine hélicoïdale, autobloquants, entraînement par insertion à brides, en alliage à base de nickel résistant à la chaleur NI-PH2801 (Inconel X750)
2/1/2022 - Paper - English, French -
Learn More€56.00 -
PR NF EN 2944, L24-985PR (01/2022)
Série aérospatiale - Filet rapporté, à freinage interne, en acier résistant à la corrosion FE-PA3004
1/1/2022 - Paper - English, French -
Learn More€56.00 -
PR NF EN 4496, L24-141PR (09/2020)
Aerospace series - Screw, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification : 1 100 MPa (at ambient temperature)/315 °C
9/1/2020 - Paper - English, French -
Learn More€64.50 -
€43.50
-
PR NF EN 2884, L24-182PR (07/2020)
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 °C
7/1/2020 - Paper - English, French -
Learn More€64.50 -
€75.67
-
NF L22-594 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 °C - Boulonnerie aéronautique - Écrous à river, à freinage interne, d'angle, série réduite, avec chambrage, à filetage ISO M ou ISO MJ, en acier résistant à la corrosion, argentés - Classification : 1 100 MPa (à température ambiante) / 425 °C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF L22-588 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 °C - Boulonnerie aéronautique - Écrous à river, à freinage interne, simple patte, avec chambrage, à filetage ISO M ou ISO MJ, en acier résistant à la corrosion, argentés - Classification : 1 100 MPa (à température ambiante) / 425 °C
6/1/2020 - Paper - French -
Learn More€34.67 -
NF L22-570 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, 60° corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 °C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF L22-587 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 °C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF L22-592 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 °C - Boulonnerie aéronautique - Écrous à river, à freinage interne, simple patte, série réduite, avec chambrage, à filetage ISO M ou ISO MJ, en acier résistant à la corrosion, argentés - Classification : 1 100 MPa (à température ambiante) / 425 °C
6/1/2020 - Paper - French -
Learn More€34.67 -
NF L22-574 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/235 °C - Boulonnerie aéronautique - Écrous à river, à freinage interne, d'angle, série réduite, avec chambrage, à filetage ISO M ou ISO MJ, en acier, cadmiés, lubrifiés MoS2 - Classification : 1 100 MPa (à température ambiante) / 235 °C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF L22-568 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 °C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF L22-575 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 °C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF L22-590 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, 60° corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 °C - Boulonnerie aéronautique - Écrous à river, à freinage interne, d'angle 60°, avec chambrage, à filetage ISO M ou ISO MJ, en acier résistant à la corrosion, argentés - Classification : 1 100 MPa (à température ambiante) / 425 °C
6/1/2020 - Paper - French -
Learn More€34.67 -
NF L22-596 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 °C - Boulonnerie aéronautique - Écrous à river, à freinage interne, flottants, simple patte, avec chambrage, à filetage ISO M ou ISO MJ, en acier résistant à la corrosion, argentés - Classification : 1 100 MPa (à température ambiante) / 425 °C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF L22-595 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 °C - Boulonnerie aéronautique - Écrous à river, à freinage interne, flottants, double patte, avec chambrage, à filetage ISO M ou ISO MJ, en acier résistant à la corrosion, argentés - Classification : 1 100 MPa (à température ambiante) / 425 °C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF L22-571 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 °C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF L22-589 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, 90° corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 °C - Boulonnerie aéronautique - Écrous à river, à freinage interne, d'angle 90°, avec chambrage, à filetage ISO M ou ISO MJ, en acier résistant à la corrosion, argentés - Classification : 1 100 MPa (à température ambiante) / 425 °C
6/1/2020 - Paper - French -
Learn More€34.67 -
NF L22-593 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, 90° corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 °C - Boulonnerie aéronautique - Écrous à river, à freinage interne, d'angle 90°, série réduite, avec chambrage, à filetage ISO M ou ISO MJ, en acier résistant à la corrosion, argentés - Classification : 1 100 MPa (à température ambiante) / 425 °C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF L22-577 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 °C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF L22-569 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, 90° corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 °C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF L22-576 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 °C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF L22-591 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 °C - Boulonnerie aéronautique - Écrous à river, à freinage interne, double patte, série réduite, avec chambrage, à filetage ISO M ou ISO MJ, en acier résistant à la corrosion, argentés - Classification : 1 100 MPa (à température ambiante) / 425 °C
6/1/2020 - Paper - French -
Learn More€34.67 -
NF L22-573 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, 90° corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 °C - Boulonnerie aéronautique - Écrous à river, à freinage interne, d'angle 90°, série réduite, avec chambrage, à filetage ISOM ou ISOMJ, en acier, cadmiés, lubrifiés MoS2 - Classification : 1100MPa (à température ambiante)/235°C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF L22-567 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 °C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF L22-572 (06/2020)
Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 °C
6/1/2020 - Paper - English, French -
Learn More€31.00 -
NF EN 2576, L24-027 (05/2020)
Aerospace series - Bolts, MJ threads, in heat resisting steel FE-PA2601 (A286) - Classification : 900 MPa (at ambient temperature)/650 °C - Technical specification
5/1/2020 - Paper - English, French -
Learn More€107.50 -
NF EN 7010, L20-022 (05/2020)
Aerospace series - Configuration - Definition and designation for product standards for externally threaded fasteners - Série aérospatiale - Matrice de configuration - Définition de désignation des normes de produits d'éléments de fixation à filetage extérieur
5/1/2020 - Paper - English, French -
Learn More€131.00 -
NF EN 4609, L22-007 (11/2019)
Aerospace series - Spiral drive recesses for threaded fasteners - Geometrical definition and technical requirements
11/1/2019 - Paper - English, French -
Learn More€68.50 -
NF EN 3278, L24-805 (10/2019)
Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
10/1/2019 - Paper - English, French -
Learn More€54.50 -
NF EN 4161, L24-169 (10/2019)
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 PMa (at ambient temperature)/235 °C - Série aérospatiale - Vis à tête cylindrique, à empreinte cruciforme déportée, tige normale à tolérance large, filetage long, en acier allié, cadmiées - Classification : 1 100 MPa (à température ambiante) / 235 °C
10/1/2019 - Paper - English, French -
Learn More€54.50 -
NF EN 3740, L24-102 (10/2019)
Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 coated - Classification : 1 100 MPa (at ambient temperature)/315 °C
10/1/2019 - Paper - English, French -
Learn More€54.50 -
NF EN 3685, L24-176 (09/2019)
Aerospace series - Bolts in heat resisting steel FE-PA2601 (A286) - Classification : 1 100 MPa/650 °C - Technical specification
9/1/2019 - Paper - English, French -
Learn More€118.00 -
NF EN 3299, L24-430 (07/2019)
Aerospace series - Shaft-nuts and threaded rings, self-locking, right - or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification
7/1/2019 - Paper - English, French -
Learn More€98.00 -
NF EN 4852, L34-151 (05/2019)
Aerospace series - External spiral drive heads for threaded fasteners - Geometrical definition and fastener head wrenching configuration - Série aérospatiale - Têtes d'entraînement externes en spirale pour fixations filetées - Définition géométrique et configuration de serrage
5/1/2019 - Paper - French -
Learn More€75.67 -
NF EN 2583, L24-030 (05/2019)
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification : 1 275 MPa (at ambient temperature)/650 °C - Technical specification
5/1/2019 - Paper - English, French -
Learn More€98.00 -
NF EN 2414, L23-122 (05/2019)
Aerospace series - Washers, chamfered, with counterbore, in alloy steel, cadmium plated - Série aérospatiale - Rondelles, fraisées, avec chambrage, en acier allié, cadmiées
5/1/2019 - Paper - English, French -
Learn More€43.50 -
NF EN 3818, L24-031 (05/2019)
Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class : 1 100 MPa (at ambient temperature) - Technical specification - Série aérospatiale - Vis à filetage MJ, en alliage de titane TI-P64001 - Classe 6 de résistance : 1 100 MPa (à température ambiante) - Spécification technique
5/1/2019 - Paper - English, French -
Learn More€98.00 -
NF EN 2880+AC, L24-492 (04/2019)
Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification : 900 MPa (at ambient temperature) / 120 °C
4/1/2019 - Paper - English, French -
Learn More€54.50 -
NF EN 3833, L24-035 (04/2019)
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification : 1 550 MPa (at ambient temperature)/650 °C - Technical specification
4/1/2019 - Paper - English, French -
Learn More€107.50 -
NF EN 2924, L24-527 (04/2019)
Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated, left hand thread - Classification : 600 MPa (at ambient temperature)/425 °C - Série aérospatiale - Écrous hexagonaux ordinaires, hauteur réduite, surplats réduits, en acier résistant à chaud, argentés, filetage à gauche - Classification : 600 MPa (à température ambiante) / 425 °C
4/1/2019 - Paper - English, French -
Learn More€43.50 -
NF EN 2878+AC, L24-678 (04/2019)
Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification : 900 MPa (at ambient temperature)/235 °C
4/1/2019 - Paper - English, French -
Learn More€54.50 -
NF EN 2923, L24-526 (04/2019)
Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated - Classification : 600 MPa (at ambient temperature)/425 °C - Série aérospatiale - Écrous hexagonaux ordinaires, hauteur réduite, surplats réduits, en acier résistant à chaud, argentés - Classification : 600 MPa (à température ambiante) / 425 °C
4/1/2019 - Paper - English, French -
Learn More€43.50 -
NF EN 2868, L24-524 (03/2019)
Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal across flats, in heat resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/650 °C
3/1/2019 - Paper - English, French -
Learn More€54.50 -
NF EN 4859, L22-491 (02/2019)
Aerospace series - Sensor based clamp load determination/high tensile bolts - Technical specification - Série aérospatiale - Détermination de la tension de serrage avec capteur / Boulons fortement contraints - Spécification technique
2/1/2019 - Paper - English, French -
Learn More€90.00 -
NF EN 4710-03, L46-620-03 (10/2018)
Aerospace series - Quick release fastening systems for non-structural applications - Part 03 : spring clamp
10/1/2018 - Paper - English, French -
Learn More€53.00 -
NF EN 2894, L24-551 (10/2018)
Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting nickel base alloy, passivated, MoS2 lubricated - Classification : 1 550 MPa (at ambient temperature)/315 °C - Série aérospatiale - Écrous bihexagonaux, à freinage interne, avec chambrage, en alliage résistant à chaud à base de nickel, passivés, lubrifiés MoS2 - Classification : 1 550 MPa (à température ambiante) / 315 °C
10/1/2018 - Paper - English, French -
Learn More€54.50 -
NF EN 3264, L43-384 (06/2018)
Aerospace series - Pipe coupling 8°30' in titanium alloy - Thrust wire nuts
6/1/2018 - Paper - English, French -
Learn More€42.11 -
NF EN 4124, L24-683 (05/2018)
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification : 1 210 MPa (at ambient temperature)/730 °C
5/1/2018 - Paper - English, French -
Learn More€42.11 -
NF EN 4122, L24-681 (05/2018)
Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification : 1 100 MPa (at ambient temperature)/650 °C
5/1/2018 - Paper - English, French -
Learn More€42.11 -
NF EN 4123, L24-682 (05/2018)
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification : 1 550 MPa (at ambient temperature)/600 °C
5/1/2018 - Paper - English, French -
Learn More€42.11 -
NF EN 3302, L24-213 (04/2018)
Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification : 1 000 MPa/550 °C - Technical specification
4/1/2018 - Paper - English, French -
Learn More€98.00 -
NF EN 3542, L24-986 (04/2018)
Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750)
4/1/2018 - Paper - English, French -
Learn More€53.04 -
NF EN 2944, L24-985 (04/2018)
Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
4/1/2018 - Paper - English, French -
Learn More€54.50 -
NF L22-500 (01/2018)
Fasteners - Nuts, self-locking, with maximum operating temperature less than or equal to 425 °C - Technical requirements
1/1/2018 - Paper - French -
Learn More€86.67 -
NF EN 2311, L31-601 (12/2017)
Aerospace series - Bushes with self-lubricating liner - Technical specification
12/1/2017 - Paper - English, French -
Learn More€107.50 -
NF EN 3903, L23-172 (12/2017)
Aerospace series - Washers, laminated, in corrosion resisting steel
12/1/2017 - Paper - English, French -
Learn More€42.11 -
NF EN 3904, L23-131 (11/2017)
Aerospace series - Washers, wire locking in aluminium alloy, anodized
11/1/2017 - Paper - English, French -
Learn More€42.11 -
NF EN 3820, L24-110 (10/2017)
Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 °C
10/1/2017 - Paper - English, French -
Learn More€53.04 -
NF EN 6128, L22-490 (10/2017)
Aerospace series - Blind bolt, 100° flush head, high strength - Série aérospatiale - Boulon aveugle tête fraisée 100° haute résistance
10/1/2017 - Paper - English, French -
Learn More€78.50 -
NF EN 2285, L31-602 (10/2017)
Aerospace series - Bushes, plain, aluminium alloy, with self-lubricating liner - Dimensions and loads
10/1/2017 - Paper - English, French -
Learn More€68.50 -
NF EN 2286, L31-603 (10/2017)
Aerospace series - Bushes, flanged aluminium alloy, with self-lubricating liner - Dimensions and loads - Série aérospatiale - Bagues à épaulement en alliage d'aluminium à garniture autolubrifiante - Dimensions et charges
10/1/2017 - Paper - English, French -
Learn More€68.50 -
NF EN 4297, L24-502 (07/2017)
Aerospace series - Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in corrosion resisting steel, passivated - Classification : 900 MPa (at ambient temperature)/120 °C
7/1/2017 - Paper - English, French -
Learn More€42.11 -
NF EN 4534-2, L31-606-002 (05/2017)
Aerospace series - Bushes, plain in aluminium alloy with self-lubricating liner, elevated load - Part 2 : dimensions and loads - Inch series
5/1/2017 - Paper - English, French -
Learn More€78.50 -
€51.00
-
NF EN 4535-2, L31-607-002 (05/2017)
Aerospace series - Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load - Part 2 : dimensions and loads - Inch series
5/1/2017 - Paper - English, French -
Learn More€98.00 -
NF EN 2879, L24-523 (05/2017)
Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated - Classification : 900 MPa (at ambient temperature) / 235 °C - Série aérospatiale - Écrous à river, à freinage interne, étanches à l'air, flottants, double patte, avec chambrage, en acier résistant à la corrosion, passivés, lubrifiés MoS2 - Classification : 900 MPa (à température ambiante) / 235°C
5/1/2017 - Paper - English, French -
Learn More€53.04 -
NF EN 4309, L24-610 (04/2017)
Aerospace series - Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in alloy steel, cadmium plated - Classification : 900 MPa (at ambient temperature) / 120 °C
4/1/2017 - Paper - English, French -
Learn More€42.11 -
NF EN 3672, L24-679 (04/2017)
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30° swage - Classification : 1 210 MPa (at ambient temperature) / 730°C
4/1/2017 - Paper - English, French -
Learn More€42.11 -
NF EN 3902, L23-171 (04/2017)
Aerospace series - Washers for rivet assemblies, in aluminium alloy, anodized, metric series
4/1/2017 - Paper - English, French -
Learn More€42.11 -
NF EN 4178, L24-168 (04/2017)
Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 °C - Série aérospatiale - Vis à tête cylindrique, à empreinte six lobes, tige normale à tolérance large, filetage moyen, en alliage de titane, anodisées, lubrifiées MoS2 - Classification : 1 100 MPa (à température ambiante) / 315 °C
4/1/2017 - Paper - English, French -
Learn More€66.25 -
NF EN 2811, L24-501 (04/2017)
Aerospace series - Nuts, hexagon, slotted/ castellated in steel cadmium plated - Classification : 1 100 MPa/235 °C
4/1/2017 - Paper - English, French -
Learn More€53.04 -
€53.04
-
€53.04
-
€54.50
-
NF EN 4138, L24-173 (09/2016)
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 °C - Série aérospatiale - Vis à tête cylindrique, à empreinte cruciforme déportée, tige normale à tolérance large, filetage moyen, en acier allié, cadmiées - Classification : 1 100 MPa (à température ambiante) / 235 °C
9/1/2016 - Paper - English, French -
Learn More€66.25 -
NF EN 4162, L24-154 (09/2016)
Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 °C - Série aérospatiale - Vis à tête fraisée 100° normale,à empreinte cruciforme déportée, tige normale à tolérance large, filetage moyen, en acier allié, cadmiées - 1100 MPa (à température ambiante) / 235 °C
9/1/2016 - Paper - English, French -
Learn More€66.25 -
NF EN 4072, L24-149 (09/2016)
Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated - Classification : 1 100 MPa (at ambient temperature)/425 °C - Séries aérospatiale - Vis à tête fraisée 100° normale, à empreinte cruciforme déportée, fût normal à tolérance serrée, filetage court, en alliage de titane, revêtues aluminium IVD - Classification : 1 100 MPa (à température ambiante) / 425 °C
9/1/2016 - Paper - English, French -
Learn More€66.25 -
NF EN 4163, L24-152 (09/2016)
Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 °C
9/1/2016 - Paper - English, French -
Learn More€53.04 -
NF EN 6129, L22-006 (09/2016)
Aerospace series - Blind bolt, protruding head, high strength, pulltype - Série aérospatiale - Boulon aveugle, tête protubérante, haute résistance, installation en tirant
9/1/2016 - Paper - English, French -
Learn More€68.50 -
NF EN 4128, L24-124 (09/2016)
Aerospace series - Bolts, normal hexagonal head, coarse tolerance shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification : 1 250 MPa (at ambient temperature)/425 °C - Série aérospatiale - Vis à tête hexagonale normale, fût à tolérance large, filetage court, en alliage résistant à chaud à base de nickel, revêtues aluminium IVD - Classification : 1 250 MPa (à température ambiante) / 425 °C
9/1/2016 - Paper - English, French -
Learn More€66.25 -
NF EN 3384, L25-003 (03/2014)
Aerospace series - Rings retaining, external, axial mounting, steel, phosphated - Série aérospatiale
3/1/2014 - Paper - English, French -
Learn More€54.50 -
NF EN 3386, L25-005 (03/2014)
Aerospace series - Rings retaining, radial mounting, steel, phosphated - Série aérospatiale
3/1/2014 - Paper - English, French -
Learn More€43.50 -
NF EN 4673-006, L24-056-006 (04/2011)
Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 006 : in heat resisting steel FE-PA2601 (A286), MoS2 coated - Série aérospatiale
4/1/2011 - Paper - English, French -
Learn More€53.00 -
NF EN 4673-001, L24-056-001 (04/2011)
Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 001 : installation and removal procedure - Série aérospatiale
4/1/2011 - Paper - English, French -
Learn More€71.00 -
NF EN 4673-003, L24-056-003 (04/2011)
Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 003 : technical specification - Série aérospatiale
4/1/2011 - Paper - English, French -
Learn More€101.14 -
NF EN 4673-005, L24-056-005 (04/2011)
Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 005 : in heat resisting nickel base alloy NI-P101HT (WASPALOY), silver plating - Série aérospatiale
4/1/2011 - Paper - English, French -
Learn More€57.00 -
NF EN 4673-002, L24-056-002 (04/2011)
Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 002 : design standard - Série aérospatiale
4/1/2011 - Paper - English, French -
Learn More€66.25 -
NF EN 4673-004, L24-056-004 (04/2011)
Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 004 : in heat resisting nickel base alloy Ni-P100HT (Inconel 718), silver plating - Série aérospatiale
4/1/2011 - Paper - English, French -
Learn More€57.00 -
NF EN 4624, L24-055 (10/2010)
Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated - Série aérospatiale
10/1/2010 - Paper - English, French -
Learn More€68.50 -
NF EN 3834, L24-488 (08/2010)
Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in corrosion resisting steel, MoS2 lubricated - Classification : 900 MPa (at ambient temperature)/315 °C - Série aérospatiale
8/1/2010 - Paper - English, French -
Learn More€68.50 -
NF EN 3537, L24-468 (08/2010)
Aerospace series - Nuts, anchor, self-locking, fixed, two lug, with counterbore, in heat resisting steel, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 °C - Série aérospatiale
8/1/2010 - Paper - English, French -
Learn More€68.50 -
NF EN 4126, L24-490 (08/2010)
Aerospace series - Nuts, anchor, self-locking, floating, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS2 lubricated - Classification : 900 MPa (at ambient temperature)/315 °C - Série aérospatiale
8/1/2010 - Paper - English, French -
Learn More€68.50 -
NF EN 2852, L22-456 (08/2010)
Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated - Classification : 1 100 MPa/650 °C - Série aérospatiale
8/1/2010 - Paper - English, French -
Learn More€68.50 -
NF EN 3538, L24-482 (08/2010)
Aerospace series - Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 °C - Série aérospatiale
8/1/2010 - Paper - English, French -
Learn More€68.50 -
NF EN 3229, L24-504 (07/2010)
Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated, left hand thread - Classification : 900 MPa (at ambient temperature)/235 °C - Série aérospatiale
7/1/2010 - Paper - English, French -
Learn More€68.50 -
NF EN 2866, L24-465 (07/2010)
Aerospace series - Nuts, anchor, self-locking, floating, one lug, with counterbore, in steel, cadmium plated, MoS2 lubricated - Classification : 1 110 MPa (at ambient temperature)/235 °C - Série aérospatiale
7/1/2010 - Paper - English, French -
Learn More€68.50 -
NF EN 2865, L24-466 (06/2010)
Aerospace series - Nuts, anchor, self-locking, floating, two lugs, with counterbore, in heat resisting steel, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 °C - Série aérospatiale
6/1/2010 - Paper - English, French -
Learn More€68.50 -
NF EN 4136, L24-147 (01/2010)
Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 °C - Série aérospatiale
1/1/2010 - Paper - English, French -
Learn More€68.50 -
NF EN 4536-2, L31-608-002 (01/2010)
Aerospace series - Bushes, plain in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2 : dimensions and loads - Inch series - Série aérospatiale
1/1/2010 - Paper - English, French -
Learn More€78.50 -
NF EN 4132, L24-128 (01/2010)
Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 °C - Série aérospatiale
1/1/2010 - Paper - English, French -
Learn More€68.50 -
NF EN 4537-2, L31-609-002 (11/2009)
Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2 : dimensions and loads - Inch series - Série aérospatiale
11/1/2009 - Paper - English, French -
Learn More€90.00 -
NF EN 4129, L24-125 (10/2009)
Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 °C - Série aérospatiale
10/1/2009 - Paper - English, French -
Learn More€68.50 -
NF EN 4499, L24-144 (07/2009)
Aerospace series - Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification : 1 100 MPa (at ambient temperature)/315 °C - Série aérospatiale
7/1/2009 - Paper - English, French -
Learn More€78.50 -
NF EN 3043, L24-111 (01/2009)
Aerospace serie - Fasteners, externally threaded, in heat resisting steel FE-PA92HT (A286) - Classification : 900 MPa/650 °C, Manufacturing method optional - Technical specification - Série aérospatiale
1/1/2009 - Paper - English, French -
Learn More€107.50 -
PR NF EN 3052, L24-101PR (11/2008)
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification : 1 100 MPa (at ambient temperature)/425 °C - Série aérospatiale
11/1/2008 - Paper - French -
Learn More€34.50 -
NF EN 2941, L21-283 (08/2008)
Aerospace series - Nickel alloy rivets - Technical specification - Série aérospatiale
8/1/2008 - Paper - English, French -
Learn More€78.50 -
NF EN 2786, L22-032 (08/2008)
Aerospace series - Electrolytic silver plating of fasteners - Série aérospatiale
8/1/2008 - Paper - English, French -
Learn More€68.50 -
NF EN 3626, L24-515 (01/2007)
Aerospace series - Nuts, hexagon, self-locking, in steel, cadmium plated, MoS2 lubricated - Classification : 1100 MPa (at ambient temperature)/235°C - Série aérospatiale
1/1/2007 - Paper - English, French -
Learn More€68.50 -
NF EN 2859, L24-104 (01/2007)
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification : 1 100 MPa (at ambient temperature)/235°C - Série aérospatiale
1/1/2007 - Paper - English, French -
Learn More€78.50 -
NF EN 4425, L35-185 (11/2006)
Aerospace series - Washers, tab in corrosion resisting steel for flight control rods - Dimensions - Série aérospatiale
11/1/2006 - Paper - English, French -
Learn More€43.50 -
NF EN 2328, L35-181 (10/2006)
Aerospace series - Washers, tab in corrosion resisting steel, cadmium plated, for flight control rods - Dimensions - Série aérospatiale
10/1/2006 - Paper - English, French -
Learn More€68.50 -
NF EN 2546, L35-182 (09/2006)
Aerospace series - Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods - Dimensions - Série aérospatiale
9/1/2006 - Paper - English, French -
Learn More€68.50 -
NF EN 2596, L35-183 (09/2006)
Aerospace series - Washers, lock, with radial serrations, in corrosion resisting steel, cadmium plated, for flight control rods - Dimensions - Série aérospatiale
9/1/2006 - Paper - English, French -
Learn More€68.50 -
NF EN 4497, L24-142 (03/2006)
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification : 1 100 MPa (at ambient temperature) / 315°C - Série aérospatiale
3/1/2006 - Paper - English, French -
Learn More€68.50 -
NF EN 4498, L24-143 (02/2006)
Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification : 1 550 MPa (at ambient temperature) / 315°C - Série aérospatiale
2/1/2006 - Paper - English, French -
Learn More€54.50 -
NF EN 4014, L24-021 (05/2005)
Aerospace series - Inserts, thickwall, self-locking - Design standard - Série aérospatiale
5/1/2005 - Paper - English, French -
Learn More€78.50 -
NF EN 4015, L24-022 (05/2005)
Aerospace series - Inserts, thickwall, self-locking - Installation and removal procedure - Série aérospatiale
5/1/2005 - Paper - English, French -
Learn More€90.00 -
NF EN 3696, L46-344 (11/2002)
Aerospace series - Washers in heat resisting steel - Série aérospatiale
11/1/2002 - Paper - French -
Learn More€66.25 -
NF EN 2810, L24-512 (11/2001)
Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification : 900 MPa (at ambient temperature) / 650° C - Série aérospatiale
11/1/2001 - Paper - English, French -
Learn More€68.50 -
NF L22-525 (04/2001) (R2011)
Aircraft bolts and nuts - Nuts, bihexagonal, self-locking, ISO M threads, fine pitch threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 °C - Boulonnerie aéronautique
4/1/2001 - Paper - French -
Learn More€48.00 -
NF L22-541 (04/2001) (R2011)
Aircraft bolts and nuts - Hexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 °C or in heat resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 °C - Boulonnerie aéronautique
4/1/2001 - Paper - French -
Learn More€48.00 -
NF L22-512 (04/2001) (R2011)
Aircraft bolts and nuts - Nuts, hexagonal, self-locking, with counterbore and captive washer, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 °C - Boulonnerie aéronautique
4/1/2001 - Paper - French -
Learn More€48.00 -
NF L22-453 (12/2000)
Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter - Boulonnerie aéronautique
12/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-431 (12/2000)
Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter - Boulonnerie aéronautique
12/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-451 (12/2000)
Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter - Boulonnerie aéronautique
12/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-442 (12/2000)
Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter - Boulonnerie aéronautique
12/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-458 (12/2000)
Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, left-hand ISO M or ISO MJ threads, 4H tolerance class - Boulonnerie aéronautique
12/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-433 (12/2000)
Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, 4H tolerance class - Boulonnerie aéronautique
12/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-455 (12/2000)
Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H tolerance class - Boulonnerie aéronautique
12/1/2000 - Paper - French -
Learn More€46.50 -
NF L22-444 (12/2000)
Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter - Boulonnerie aéronautique
12/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-432 (12/2000)
Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter - Boulonnerie aéronautique
12/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-443 (12/2000)
Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter - Boulonnerie aéronautique
12/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-441 (12/2000)
Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter - Boulonnerie aéronautique
12/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-434 (12/2000)
Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, 4H tolerance class - Boulonnerie aéronautique
12/1/2000 - Paper - French -
Learn More€46.50 -
NF L22-457 (12/2000)
Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H tolerance class - Boulonnerie aéronautique
12/1/2000 - Paper - French -
Learn More€46.33 -
NF L22-439 (10/2000)
Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H tolerance class - Boulonnerie aéronautique
10/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-462 (10/2000)
Aircraft bolts and nuts - Nuts, hexagonal, Plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class - Boulonnerie aéronautique
10/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-435 (10/2000)
Nuts, hexagonal, plain, reduced height, normal across flats, ISO M or ISO MJ threads 4H5H or 5H tolerance class according to diameter - Boulonnerie aéronautique
10/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-436 (10/2000)
Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter - Boulonnerie aéronautique
10/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-438 (10/2000)
Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter - Boulonnerie aéronautique
10/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-440 (10/2000)
Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H tolerance class - Boulonnerie aéronautique
10/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-461 (10/2000)
Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class - Boulonnerie aéronautique
10/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-437 (10/2000)
Aircraft bolts and nuts - Nuts, hexagonal, palin, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter - Boulonnerie aéronautique
10/1/2000 - Paper - French -
Learn More€48.00 -
NF L22-519 (09/2000)
Aircraft bolts and nuts - Bihexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 550 MPa (at ambient temperature) / 235 °C - Boulonnerie aéronautique
9/1/2000 - Paper - French -
Learn More€48.00 -
€48.00
-
€34.67
-
€34.67
-
NF L21-215 (09/2000)
Fasteners - Rivets, solid, universal head - Éléments de fixation
9/1/2000 - Paper - French -
Learn More€34.67 -
NF L21-273 (08/2000)
Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10 - Éléments de fixation
8/1/2000 - Paper - French -
Learn More€48.00 -
NF L21-272 (08/2000)
Fasteners - Lockbolts, 100° countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024 - Éléments de fixation
8/1/2000 - Paper - French -
Learn More€48.00 -
NF L21-274 (08/2000)
Fasteners - Lockbolts, 100° countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10 - Éléments de fixation
8/1/2000 - Paper - French -
Learn More€34.50 -
NF L21-271 (08/2000)
Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024 - Éléments de fixation
8/1/2000 - Paper - French -
Learn More€48.00
