49.030.99 : Other fasteners
-
UNE-CEN/TR 17603-32-25:2022
Space engineering - Mechanical shock design and verification handbook (Endorsed by Asociación Española de Normalización in August of 2022.)
10/12/2022 - PDF - English -
Learn More€387.00 -
UNE-CEN/TR 17603-32-22:2022
Space engineering - Insert design handbook (Endorsed by Asociación Española de Normalización in August of 2022.)
10/12/2022 - PDF - English -
Learn More€420.00 -
UNE-EN 2287:2022
Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English -
Learn More€46.00 -
UNE-CEN/TR 17603-32-23:2022
Space engineering - Threaded fasteners handbook (Endorsed by Asociación Española de Normalización in August of 2022.)
10/12/2022 - PDF - English -
Learn More€206.00 -
UNE-CEN/TR 17603-32-21:2022
Space engineering - Adhesive bonding handbook (Endorsed by Asociación Española de Normalización in August of 2022.)
10/12/2022 - PDF - English -
Learn More€420.00 -
UNE-EN 4234:2020
Aerospace series - Clamps, worm drive - Dimensions, masses (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English -
Learn More€57.00 -
UNE-EN 3278:2019
Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness) (Endorsed by Asociación Española de Normalización in December of 2019.)
12/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 2114:2019
Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D = 10 mm
7/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 2288:2019
Aerospace series - Bush, flanged, corrosion resisting steel, with self-lubricating liner - Dimensions and loads (Endorsed by Asociación Española de Normalización in April of 2019.)
4/1/2019 - PDF - English -
Learn More€42.00 -
UNE-EN 6128:2017
Aerospace series - Blind bolt, 100° flush head, high strength (Endorsed by Asociación Española de Normalización in November of 2017.)
11/1/2017 - PDF - English -
Learn More€60.00 -
UNE-EN 2285:2017
Aerospace series - Bushes, plain, aluminium alloy, with self-lubricating liner - Dimensions and loads (Endorsed by Asociación Española de Normalización in June of 2017.)
6/1/2017 - PDF - English -
Learn More€46.00 -
UNE-EN 2286:2017
Aerospace series - Bushes, flanged aluminium alloy, with self-lubricating liner - Dimensions and loads (Endorsed by Asociación Española de Normalización in June of 2017.)
6/1/2017 - PDF - English -
Learn More€46.00 -
UNE-EN 2311:2017
Aerospace series - Bushes with self-lubricating liner - Technical specification (Endorsed by Asociación Española de Normalización in May of 2017.)
5/1/2017 - PDF - English -
Learn More€71.00 -
UNE-EN 4534-2:2016
Aerospace series - Bushes, plain in aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series (Endorsed by AENOR in October of 2016.)
10/1/2016 - PDF - English -
Learn More€62.00 -
UNE-EN 6092:2016
Aerospace series - Receptacle, floating, double lug (Endorsed by AENOR in October of 2016.)
10/1/2016 - PDF - English -
Learn More€42.00 -
UNE-EN 2648:2013
Aerospace series - Washers, concave, in alloy steel, cadmium plated (Endorsed by AENOR in February of 2014.)
2/1/2014 - PDF - English -
Learn More€28.00 -
UNE-EN 3417:2012 (R2018)
Aerospace series - Rivets, solid, universal head, in nickel base alloy NI-P11, metric series (Endorsed by AENOR in April of 2012.)
4/1/2012 - PDF - English -
Learn More€35.00 -
UNE-EN 3238:2010
Aerospace series - Metallic materials - Test method - Shear test for wires and rivets (Endorsed by AENOR in November of 2010.)
11/1/2010 - PDF - English -
Learn More€46.00 -
UNE-EN 4115:2010
Aerospace series - Cushion, rubber for clamps - Dimensions, masses (Endorsed by AENOR in May of 2010.)
5/1/2010 - PDF - English -
Learn More€42.00 -
UNE-EN 2606:2009 (R2018)
Aerospace series - 60° interface for adaptors, threaded, with lockring - Geometric configuration (Endorsed by AENOR in September of 2009.)
9/1/2009 - PDF - English -
Learn More€35.00 -
UNE-EN 3115:2009
Aerospace series - Aluminium alloy 7050-T73 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
UNE-EN 2117:2009
Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
UNE-EN 2115:2009
Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
UNE-EN 2116:2009
Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
UNE-EN 3916:2008 (R2018)
Aerospace series - Insert, thin wall - Salvage procedure for components (Endorsed by AENOR in October of 2008.)
10/1/2008 - PDF - English -
Learn More€62.00 -
UNE-EN 3915:2008 (R2018)
Aerospace series - Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), for salvage of components - Classification: 1 275 MPa (at ambient temperature) / 550 C - Technical specification (Endorsed by AENOR in June of 2008.)
6/1/2008 - PDF - English -
Learn More€65.00 -
UNE-EN 3729:2008 (R2018)
Aerospace series - Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated (Endorsed by AENOR in June of 2008.)
6/1/2008 - PDF - English -
Learn More€35.00 -
UNE-EN 3905:2008 (R2018)
Aerospace series - Six lobe recesses for bolts - Technical specification (Endorsed by AENOR in June of 2008.)
6/1/2008 - PDF - English -
Learn More€28.00 -
UNE-EN 3298:2008 (R2018)
Aerospace series - Inserts, thin wall, self-locking - Installation and removal procedure (Endorsed by AENOR in May of 2008.)
5/1/2008 - PDF - English -
Learn More€63.00 -
UNE-EN 4302:2008 (R2018)
Aerospace series - Open ring insert tool, square drive (Endorsed by AENOR in May of 2008.)
5/1/2008 - PDF - English -
Learn More€35.00 -
UNE-EN 4355:2008 (R2018)
Aerospace series - Six lobe recess - Drivers, socket (Endorsed by AENOR in May of 2008.)
5/1/2008 - PDF - English -
Learn More€28.00 -
UNE-EN 4357:2006 (R2017)
Aerospace series - Six lobe recess - Drivers, handle (Endorsed by AENOR in April of 2007.)
4/1/2007 - PDF - English -
Learn More€28.00 -
UNE-EN 4354:2006 (R2017)
Aerospace series - Six lobe recess - Drivers, relieved (Endorsed by AENOR in April of 2007.)
4/1/2007 - PDF - English -
Learn More€38.00 -
UNE-EN 4358:2006 (R2017)
Aerospace series - Six lobe recess - Drivers, double ended, 90 (Endorsed by AENOR in April of 2007.)
4/1/2007 - PDF - English -
Learn More€35.00 -
UNE-EN 4356:2006 (R2017)
Aerospace series - Six lobe recess - Drivers, short (Endorsed by AENOR in April of 2007.)
4/1/2007 - PDF - English -
Learn More€35.00 -
UNE-EN 4359:2006 (R2017)
Aerospace series - Six lobe recess - Drivers - Technical specification (Endorsed by AENOR in April of 2007.)
4/1/2007 - PDF - English -
Learn More€46.00 -
UNE-EN 3425:2006 (R2017)
Aerospace series - Groove dimensions for axial mouting internal type retaining rings (Endorsed by AENOR in November of 2006.)
11/1/2006 - PDF - English -
Learn More€28.00 -
UNE-EN 3426:2006 (R2017)
Aerospace series - Groove dimensions for axial mounting external type retaining rings (Endorsed by AENOR in November of 2006.)
11/1/2006 - PDF - English -
Learn More€28.00 -
UNE-EN 3427:2006 (R2017)
Aerospace series - Groove dimensions for radial mounting retaining rings (Endorsed by AENOR in November of 2006.)
11/1/2006 - PDF - English -
Learn More€24.00 -
UNE-EN 3709:2006 (R2017)
Aerospace series - Wrenches and sockets, bi-hexagonal - Technical specification (Endorsed by AENOR in August of 2006.)
8/1/2006 - PDF - English -
Learn More€42.00 -
UNE-EN 4111:2006 (R2017)
Aerospace series - Wrenches, splined, socket for pipe fittings - Technical specification (Endorsed by AENOR in July of 2006.)
7/1/2006 - PDF - English -
Learn More€38.00 -
UNE-EN 2603:2005
Aerospace series - Port ends for adaptors, threaded, with lockring - Geometric configuration (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 2608:2005
Aerospace series - Installation and removal requirements for 8° 30' adaptors, threaded, with lockring (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€68.00 -
UNE-EN 2607:2005
Aerospace series - O-rings for adaptors, threaded, with lockring - Survey (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€28.00 -
UNE-EN 4306:2005
Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness) (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 2645:2005
Aerospace series - Lockrings for adaptors, threaded, with lockring - Dimensions (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€24.00 -
UNE-EN 4303:2005
Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness) (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 2602:2005
Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€38.00 -
UNE-EN 2604:2005
Aerospace series - 8° 30' interface for adaptors, threaded, with lockring - Geometric configuration (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 4307:2005
Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness) (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 2605:2005
Aerospace series - 24° interface for adaptors, threaded, with lockring - Geometric configuration (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 4304:2005
Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness) (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
€46.00 -
UNE-EN 2913:2000 (R2018)
AEROSPACE SERIES - WASHERS, FLAT, LARGE DIAMETER, IN STEEL, CADMIUM PLATED
4/17/2000 - PDF - English -
Learn More€55.20 -
€55.20
-
UNE-EN 2913:2000 (R2018)
AEROSPACE SERIES - WASHERS, FLAT, LARGE DIAMETER, IN STEEL, CADMIUM PLATED
4/17/2000 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 3297:1998
AEROSPACE SERIES. INSERTS, THIN WALL, SELF-LOCKING, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718). TECHNICAL SPECIFICACION.
10/13/1998 - PDF - English -
Learn More€81.60 -
UNE-EN 3297:1998
AEROSPACE SERIES. INSERTS, THIN WALL, SELF-LOCKING, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718). TECHNICAL SPECIFICACION.
10/13/1998 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 3237:1998
AEROSPACE SERIES. INSERTS, THIN WALL, SELF-LOCKING, LONG, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED INTERNAL THREAD.
10/8/1998 - PDF - English -
Learn More€55.20 -
UNE-EN 3676:1998
AEROSPACE SERIES. INSERTS, THIN WALL, SELF-LOCKING. DESIGN STANDARD.
10/8/1998 - PDF - Spanish -
Learn More€58.00 -
UNE-EN 3236:1998
AEROSPACE SERIES. INSERTS, THIN WALL, SELF-LOCKING, SHORT, IN HEAT RESISTING NICKEL BASA ALLOY NI-P100HT (INCONEL 718), SILVER PLATED INTERNAL THREAD.
10/8/1998 - PDF - English -
Learn More€55.20 -
UNE-EN 3676:1998
AEROSPACE SERIES. INSERTS, THIN WALL, SELF-LOCKING. DESIGN STANDARD.
10/8/1998 - PDF - English -
Learn More€69.60 -
UNE-EN 3237:1998
AEROSPACE SERIES. INSERTS, THIN WALL, SELF-LOCKING, LONG, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED INTERNAL THREAD.
10/8/1998 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 3236:1998
AEROSPACE SERIES. INSERTS, THIN WALL, SELF-LOCKING, SHORT, IN HEAT RESISTING NICKEL BASA ALLOY NI-P100HT (INCONEL 718), SILVER PLATED INTERNAL THREAD.
10/8/1998 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2948:1997 (R2017)
AEROSPACE SERIES. WASHERS, TAB, IN HEAT RESISTING STEEL, PASSIVATED.
4/8/1997 - PDF - English -
Learn More€55.20 -
UNE-EN 2949:1997 (R2017)
AEROSPACE SERIES. WASHERS, WIRE LOCKING, IN CORROSION RESISTING STEEL, PASSIVATED.
4/8/1997 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2948:1997 (R2017)
AEROSPACE SERIES. WASHERS, TAB, IN HEAT RESISTING STEEL, PASSIVATED.
4/8/1997 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2949:1997 (R2017)
AEROSPACE SERIES. WASHERS, WIRE LOCKING, IN CORROSION RESISTING STEEL, PASSIVATED.
4/8/1997 - PDF - English -
Learn More€55.20 -
UNE-EN 2149:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 5056A, ANODIZED OR CHROMATED, INCH BASED SERIES.
3/18/1997 - PDF - Spanish -
Learn More€52.00 -
UNE-EN 2149:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 5056A, ANODIZED OR CHROMATED, INCH BASED SERIES.
3/18/1997 - PDF - English -
Learn More€62.40 -
€34.00
-
UNE-EN 3643:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, 100º COUNTERSUNK NORMAL HEAD, IN TITANIUM TI-PO2, ANODIZED, INCH BASED SERIES.
3/14/1997 - PDF - English -
Learn More€55.20 -
UNE-EN 3642:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, 100º COUNTERSUNK NORMAL HEAD WITH DOME, IN TITANIUM TI-PO2, ANODIZED, INCH BASED SERIES.
3/14/1997 - PDF - English -
Learn More€55.20 -
€40.80
-
UNE-EN 3644:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN TITANIUM TI-PO2, ANODIZED, INCH BASED SERIES.
3/14/1997 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 3643:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, 100º COUNTERSUNK NORMAL HEAD, IN TITANIUM TI-PO2, ANODIZED, INCH BASED SERIES.
3/14/1997 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 3642:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, 100º COUNTERSUNK NORMAL HEAD WITH DOME, IN TITANIUM TI-PO2, ANODIZED, INCH BASED SERIES.
3/14/1997 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 3644:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN TITANIUM TI-PO2, ANODIZED, INCH BASED SERIES.
3/14/1997 - PDF - English -
Learn More€55.20 -
UNE-EN 2912:1997 (R2017)
AEROSPACE SERIES. WASHERS, FLAT, LARGE DIAMETER, IN ALUMINIUM ALLOY, ANODIZED OF CHROMATED.
1/16/1997 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 3135:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED, INCH BASED SERIES.
1/16/1997 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 3141:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P11, CADMIUM PLATED, INCH BASED SERIES.
1/16/1997 - PDF - English -
Learn More€55.20 -
UNE-EN 2914:1997 (R2017)
AEROSPACE SERIES. WASHERS, FLAT, LARGE DIAMETER, IN HEAT RESISTANCE STEEL, PASSIVATED.
1/16/1997 - PDF - English -
Learn More€55.20 -
UNE-EN 2998:1997 (R2017)
AEROSPACE SERIES. WASHERS, FLAT, IN HEAT RESISTING STEEL, PASSIVATED.
1/16/1997 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 3136:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, INCH BASED SERIES.
1/16/1997 - PDF - English -
Learn More€55.20 -
UNE-EN 2912:1997 (R2017)
AEROSPACE SERIES. WASHERS, FLAT, LARGE DIAMETER, IN ALUMINIUM ALLOY, ANODIZED OF CHROMATED.
1/16/1997 - PDF - English -
Learn More€55.20 -
UNE-EN 3135:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED, INCH BASED SERIES.
1/16/1997 - PDF - English -
Learn More€55.20 -
UNE-EN 3142:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P11, INCH BASED SERIES.
1/16/1997 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2998:1997 (R2017)
AEROSPACE SERIES. WASHERS, FLAT, IN HEAT RESISTING STEEL, PASSIVATED.
1/16/1997 - PDF - English -
Learn More€55.20 -
UNE-EN 3141:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P11, CADMIUM PLATED, INCH BASED SERIES.
1/16/1997 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2914:1997 (R2017)
AEROSPACE SERIES. WASHERS, FLAT, LARGE DIAMETER, IN HEAT RESISTANCE STEEL, PASSIVATED.
1/16/1997 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 3136:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, INCH BASED SERIES.
1/16/1997 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 3142:1997 (R2017)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P11, INCH BASED SERIES.
1/16/1997 - PDF - English -
Learn More€55.20 -
UNE-EN 2122:1996 (R2017)
AEROSPACE SERIES. WASHERS. FLAT. IN ALUMINIUM ALLOY, ANODIZED OR CHROMATED.
12/20/1996 - PDF - English -
Learn More€62.40 -
UNE-EN 2122:1996 (R2017)
AEROSPACE SERIES. WASHERS. FLAT. IN ALUMINIUM ALLOY, ANODIZED OR CHROMATED.
12/20/1996 - PDF - Spanish -
Learn More€52.00 -
UNE-EN 3380:1996 (R2017)
AEROSPACE SERIES. RINGS, RETAINING. TECHNICAL SPECIFICATION.
11/22/1996 - PDF - Spanish -
Learn More€53.00 -
UNE-EN 3380:1996 (R2017)
AEROSPACE SERIES. RINGS, RETAINING. TECHNICAL SPECIFICATION.
11/22/1996 - PDF - English -
Learn More€63.60 -
UNE-EN 3151:1996
AEROSPACE SERIES. DOWELS, PLAIN, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718).
6/24/1996 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 3611:1996
AEROSPACE SERIES. SPIGOTS. DIMENSIONS AND FIT SELECTION. DESIGN STANDARD.
6/24/1996 - PDF - Spanish -
Learn More€34.00 -
UNE-EN 3150:1996
AEROSPACE SERIES. PINS, SHOULDER, HEADLESS, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718).
6/24/1996 - PDF - Spanish -
Learn More€34.00 -
UNE-EN 3151:1996
AEROSPACE SERIES. DOWELS, PLAIN, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718).
6/24/1996 - PDF - English -
Learn More€46.80 -
UNE-EN 3611:1996
AEROSPACE SERIES. SPIGOTS. DIMENSIONS AND FIT SELECTION. DESIGN STANDARD.
6/24/1996 - PDF - English -
Learn More€40.80 -
UNE-EN 3150:1996
AEROSPACE SERIES. PINS, SHOULDER, HEADLESS, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718).
6/24/1996 - PDF - English -
Learn More€40.80 -
UNE-EN 2144:1996 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2117, INCH BASED SERIES.
2/6/1996 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2145:1996 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED, INCH BASED SERIES.
2/6/1996 - PDF - English -
Learn More€46.80 -
UNE-EN 2144:1996 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2117, INCH BASED SERIES.
2/6/1996 - PDF - English -
Learn More€46.80 -
UNE-EN 2145:1996 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED, INCH BASED SERIES.
2/6/1996 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2556:1993
AEROSPACE SERIES. RIVETS, SOLID, 100º NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056 A, ANODIZED OR CHROMATED, INCH BASED SERIES.
12/15/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2555:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, 100º NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES.
12/15/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2553:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, 100º NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES.
12/15/1993 - PDF - English -
Learn More€55.20 -
UNE-EN 2556:1993
AEROSPACE SERIES. RIVETS, SOLID, 100º NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056 A, ANODIZED OR CHROMATED, INCH BASED SERIES.
12/15/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2555:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, 100º NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES.
12/15/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2553:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, 100º NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES.
12/15/1993 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2146:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES.
11/23/1993 - PDF - English -
Learn More€55.20 -
UNE-EN 2552:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, 100º NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED, INCH BASED SERIES.
11/23/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2143:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM 1050A, INCH BASED SERIES.
11/23/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2551:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, 100º NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, INCH BASED SERIES.
11/23/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2550:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, 100º NORMAL COUNTERSUNK HEAD, IN ALUMINIUM 1050A, INCH BASED SERIES.
11/23/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2148:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES.
11/23/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2552:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, 100º NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED, INCH BASED SERIES.
11/23/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2143:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM 1050A, INCH BASED SERIES.
11/23/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2146:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES.
11/23/1993 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2551:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, 100º NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, INCH BASED SERIES.
11/23/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2550:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, 100º NORMAL COUNTERSUNK HEAD, IN ALUMINIUM 1050A, INCH BASED SERIES.
11/23/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2148:1993 (R2018)
AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES.
11/23/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2569:1993 (R2017)
AEROSPACE SERIES. CONTROL CABLE FITTINGS AND TURNBARRELS. TECHNICAL SPECIFICATION.
7/16/1993 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 2569:1993 (R2017)
AEROSPACE SERIES. CONTROL CABLE FITTINGS AND TURNBARRELS. TECHNICAL SPECIFICATION.
7/16/1993 - PDF - English -
Learn More€72.00 -
UNE-EN 2236:1992 (R2018)
AEROSPACE SERIES. PINS, HEADED, CLOSE TOLERANCE SHANK, IN ALLOY STEEL. TECHNICAL SPECIFICATION
11/23/1992 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2236:1992 (R2018)
AEROSPACE SERIES. PINS, HEADED, CLOSE TOLERANCE SHANK, IN ALLOY STEEL. TECHNICAL SPECIFICATION
11/23/1992 - PDF - English -
Learn More€46.80 -
UNE-EN 2355:1992
AEROSPACE SERIES. FORK-ENDS, THREADED CONTROL CABLE IN CORROSION RESISTING STEEL. DIMENSIONS AND LOADS.
10/20/1992 - PDF - English -
Learn More€55.20 -
UNE-EN 2354:1992
AEROSPACE SERIES. EYE-ENDS, THREADED CONTROL CABLE IN CORROSION RESISTING STEEL. DIMENSIONS AND LOADS.
10/20/1992 - PDF - English -
Learn More€55.20 -
UNE-EN 2355:1992
AEROSPACE SERIES. FORK-ENDS, THREADED CONTROL CABLE IN CORROSION RESISTING STEEL. DIMENSIONS AND LOADS.
10/20/1992 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2354:1992
AEROSPACE SERIES. EYE-ENDS, THREADED CONTROL CABLE IN CORROSION RESISTING STEEL. DIMENSIONS AND LOADS.
10/20/1992 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2363:1992
AEROESPACE SERIES. LOCKING CLIPS FOR TURNBUCKLES OF CONTROL CABLES. DIMENSIONS.
10/15/1992 - PDF - Spanish -
Learn More€27.00 -
€46.80
-
€40.80
-
€34.00
-
UNE-EN 2363:1992
AEROESPACE SERIES. LOCKING CLIPS FOR TURNBUCKLES OF CONTROL CABLES. DIMENSIONS.
10/15/1992 - PDF - English -
Learn More€32.40 -
€40.80
-
€39.00
-
€34.00
-
UNE-EN 2358:1992
AEROSPACE SERIES. EYE-ENDS IN CORROSION RESISTING STEEL SWAGED ON TYPE, CONTROL CABLE. DIMENSIONS AND LOADS.
9/23/1992 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2360:1992
AEROSPACE SERIES. FORK-ENDS FOR ROLLING BEARINGS IN CORROSION RESISTING STEEL SWAGED ON TYPE CONTROL CABLE. DIMENSIONS AND LOADS.
9/23/1992 - PDF - English -
Learn More€55.20 -
UNE-EN 2357:1992
AEROSPACE SERIES. STUD-ENDS IN CORROSION RESISTING STEEL SWAGED ON TYPE, CONTROL CABLE. DIMENSIONS AND LOADS.
9/23/1992 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2359:1992
AEROSPACE SERIES. FORK-ENDS IN CORROSION RESISTING STEEL SWAGED ON TYPE, CONTROL CABLE. DIMENSIONS AND LOADS.
9/23/1992 - PDF - English -
Learn More€46.80 -
UNE-EN 2356:1992
AEROSPACE SERIES. FORK-ENDS, THREADED CONTROL CABLE FOR ROLLING BEARINGS IN CORROSION RESISTING STEEL. DIMENSIONS AND LOADS.
9/23/1992 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2358:1992
AEROSPACE SERIES. EYE-ENDS IN CORROSION RESISTING STEEL SWAGED ON TYPE, CONTROL CABLE. DIMENSIONS AND LOADS.
9/23/1992 - PDF - English -
Learn More€46.80 -
UNE-EN 2357:1992
AEROSPACE SERIES. STUD-ENDS IN CORROSION RESISTING STEEL SWAGED ON TYPE, CONTROL CABLE. DIMENSIONS AND LOADS.
9/23/1992 - PDF - English -
Learn More€55.20 -
UNE-EN 2360:1992
AEROSPACE SERIES. FORK-ENDS FOR ROLLING BEARINGS IN CORROSION RESISTING STEEL SWAGED ON TYPE CONTROL CABLE. DIMENSIONS AND LOADS.
9/23/1992 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2356:1992
AEROSPACE SERIES. FORK-ENDS, THREADED CONTROL CABLE FOR ROLLING BEARINGS IN CORROSION RESISTING STEEL. DIMENSIONS AND LOADS.
9/23/1992 - PDF - English -
Learn More€55.20 -
UNE-EN 2359:1992
AEROSPACE SERIES. FORK-ENDS IN CORROSION RESISTING STEEL SWAGED ON TYPE, CONTROL CABLE. DIMENSIONS AND LOADS.
9/23/1992 - PDF - Spanish -
Learn More€39.00 -
€46.80
-
UNE-EN 2586:1992 (R2017)
AEROSPACE SERIES. WASHERS, LOCK FOR FLIGHT CONTROL RODS. DIMENSIONS.
9/21/1992 - PDF - Spanish -
Learn More€27.00 -
UNE-EN 2362:1992
AEROSPACE SERIES. BALL-ENDS, IN CORROSION RESISTING STEEL SWAGED ON TYPE, CONTROL CABLE. DIMENSIONS AND LOADS.
9/21/1992 - PDF - Spanish -
Learn More€27.00 -
UNE-EN 2361:1992
AEROSPACE SERIES. BALL-ENDS, DOUBLE SHANK IN CORROSION RESISTING STEEL SWAGED ON TYPE, CONTROL CABLE. DIMENSIONS AND LOADS.
9/21/1992 - PDF - Spanish -
Learn More€27.00 -
UNE-EN 2586:1992 (R2017)
AEROSPACE SERIES. WASHERS, LOCK FOR FLIGHT CONTROL RODS. DIMENSIONS.
9/21/1992 - PDF - English -
Learn More€32.40 -
UNE-EN 2362:1992
AEROSPACE SERIES. BALL-ENDS, IN CORROSION RESISTING STEEL SWAGED ON TYPE, CONTROL CABLE. DIMENSIONS AND LOADS.
9/21/1992 - PDF - English -
Learn More€32.40 -
€39.00
-
UNE-EN 2361:1992
AEROSPACE SERIES. BALL-ENDS, DOUBLE SHANK IN CORROSION RESISTING STEEL SWAGED ON TYPE, CONTROL CABLE. DIMENSIONS AND LOADS.
9/21/1992 - PDF - English -
Learn More€32.40 -
UNE 28640:1988
AEROSPACE SERIES. REPRESENTATION OF RIVETS ON DRAWINGS FOR AEROSPACE EQUIPMENT.
4/8/1988 - PDF - English -
Learn More€55.20 -
UNE 28640:1988
AEROSPACE SERIES. REPRESENTATION OF RIVETS ON DRAWINGS FOR AEROSPACE EQUIPMENT.
4/8/1988 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 4113:2023
Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses (Endorsed by Asociación Española de Normalización in February of 2024.)
4/25/2024 - PDF - English -
Learn More€46.00 -
UNE-EN 4114:2023
Aerospace series - Clamps, loop ("P" type) in aluminium alloy with rubber cushioning - Dimensions, masses (Endorsed by Asociación Española de Normalización in February of 2024.)
4/25/2024 - PDF - English -
Learn More€46.00 -
UNE-EN 6095:2023
Aerospace series - Rotary fasteners - Structural and non-structural applications - Technical specification (Endorsed by Asociación Española de Normalización in January of 2024.)
4/25/2024 - PDF - English -
Learn More€59.00
