49.030.99 : Other fasteners
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
SAE TS 378-1:2015-12-04
TS378 Testing and Assembly Requirements ESC 61, ESC 62 and ESC 63
12/4/2015 - PDF - English -
Learn More€100.00 -
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
SAE AS 2969-5:2015-12-04
AS2969 G.A. Flanged Half for 2 1/2" Re-Fuelling Coupling (Open Ended Type)
12/4/2015 - PDF - English -
Learn More€100.00 -
€100.00
-
€100.00
-
€100.00
-
€100.00
-
SAE RS 268-1:2015-12-03
RS268 Standard No.4/6 Counter Rotating Propeller Shafts (Integral Bearing Race) and Engine Nose
12/3/2015 - PDF - English -
Learn More€100.00 -
SAE AGS 1601-4:2015-12-03
AGS1601 Sleeves, Identification, Cable, L.T. Unisheath 4, Cable
12/3/2015 - PDF - English -
Learn More€100.00 -
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
SAE RS 250-5:2015-12-03
RS250 Installation Drg. of Flanged Half of 1 1/2" Fuelling Coupling
12/3/2015 - PDF - English -
Learn More€100.00 -
€100.00
-
€100.00
-
SAE RS 269-1:2015-12-03
RS269 Standard No. 4/6 Counter Rotating Propeller Shafts (Separate Bearing Race) and Engine Nose
12/3/2015 - PDF - English -
Learn More€100.00 -
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
€100.00
-
SAE RS 251-3:2015-12-03
RS251 Installation Drg. of Flanged Half 2 1/2" Fuelling Coupling
12/3/2015 - PDF - English -
Learn More€100.00 -
€100.00
-
€100.00
-
€100.00
-
€100.00
-
SAE AGS 1603-3:2015-12-03
AGS1603 Sleeves, Identification Cable, L.T. Uniflex, 4, Cable
12/3/2015 - PDF - English -
Learn More€100.00 -
€100.00
-
€100.00
-
€100.00
-
SAE AGS 1621-4:2015-12-03
AGS1621 Sleeves, Identification, Cable, LT. Unispark, 7. Cable
12/3/2015 - PDF - English -
Learn More€100.00 -
€100.00
-
€100.00
-
€100.00
-
ASD-STAN prEN 2311 (09/01/2015)
Aerospace series - Bushes with self-lubricating liner - Technical specification
9/1/2015 - PDF - English -
Learn More€123.26 -
SAE MAP 1201:2015-08-21
Tolerances, Hexagon Bar, Machined Flat and Forged Wrenching Flat Sizes for Fluid Fittings, Metric
8/21/2015 - PDF - English -
Learn More€39.00 -
SAE AS 5986D:2015-08-10
FITTING ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/
8/10/2015 - PDF - English -
Learn More€47.00 -
ASD-STAN prEN 2286 (07/01/2015)
Aerospace series - Bushes, flanged aluminium alloy, with self-lubricating liner - Dimensions and loads
7/1/2015 - PDF - English -
Learn More€52.83 -
SAE TS 147AR-8:2015-07-01
TS147AR Amendment Record for Technical Specification No. TS147
7/1/2015 - PDF - English -
Learn More€100.00 -
€97.01
-
BS 3SP 1:2013
Specification. Shackles, carbon steel, cadmium plated for aircraft
4/30/2015 - PDF - English -
Learn More€151.00 -
€39.00
-
SAE MA 2155/3:2015-04-27
CLAMP, RECTANGULAR LOOP, CUSHIONED, WITH WEDGE, PHOSPHATE ESTER FLUID RESISTANT, ALUMINUM, METRIC
4/27/2015 - PDF - English -
Learn More€47.00 -
€81.00
-
€47.00
-
SAE MA 2155/4:2015-04-27
CLAMP, RECTANGULAR LOOP, CUSHIONED, WITH WEDGE, PHOSPHATE ESTER FLUID RESISTANT, STAINLESS STEEL, METRIC
4/27/2015 - PDF - English -
Learn More€47.00 -
€39.00
-
SAE MA 2155/1:2015-04-27
CLAMP, RECTANGULAR LOOP, CUSHIONED, WITH WEDGE, HYDROCARBON FLUID RESISTANT, ALUMINUM, METRIC
4/27/2015 - PDF - English -
Learn More€54.00 -
€47.00
-
€60.00
-
€54.00
-
€54.00
-
€60.00
-
€54.00
-
€47.00
-
SAE AS 65200-1:2015-02-23
AS65200 to AS65235 Clamp, Loop, Cushioned, High Temperature -60°C to +550°C (for 5mm and .190 inch Fasteners)
2/23/2015 - PDF - English -
Learn More€100.00 -
SAE AS 9551B:2014-10-27
BRACKET, FLAT, STEEL UNS G41300, CADMIUM PLATED (Stabilized: Oct 2014)
10/27/2014 - PDF - English -
Learn More€60.00 -
SAE AS 23000-5:2014-10-16
AS23000-099 Bolt, Close Tolerance, Double Hexagon Extended Washer Head, HR650, .250-28 UNJF-3A MOD
10/16/2014 - PDF - English -
Learn More€100.00 -
SAE AS 23190/2A:2014-08-20
STRAPS, CLAMPS, PLASTIC AND METAL, AND MOUNTING HARDWARE, PLASTIC FOR CABLE HARNESS TYING AND SUPPORT CLAMP, LOOP, METAL, CUSHIONED, ADJUSTABLE, WIRE SUPPORT, TYPE V, CLASS 1 (Stabilized: Aug 2014)
8/20/2014 - PDF - English -
Learn More€83.00 -
€39.00
-
€151.00
-
SAE TS 120AR-6:2014-05-01
TS120-AR Amendment Record for Technical Specification No. TS120
5/1/2014 - PDF - English -
Learn More€100.00 -
UNE-EN 2648:2013
Aerospace series - Washers, concave, in alloy steel, cadmium plated (Endorsed by AENOR in February of 2014.)
2/1/2014 - PDF - English -
Learn More€28.00 -
SAE AS 23000AR-5:2014-01-01
AS23000-AR Amendment Record for Drawing Standard No. AS23000-099
1/1/2014 - PDF - English -
Learn More€100.00 -
SAE AS 7229:2018-11-21
Rivets, Steel, Corrosion and Heat Resistant 18Cr - 10.5Ni - 0.70(Cb+Ta) Solution Heat Treated Procurement Specification For
10/28/2013 - PDF - English -
Learn More€75.00 -
SAE AS 7222A:2018-11-21
Aluminum Rivets, UNS A92117 2.5Cu - 0.3Mg (2117-T4) Procurement Specification
10/10/2013 - PDF - English -
Learn More€79.00 -
SAE AS 14488A:2013-08-29
CLAMP, LOOP, PLASTIC, WIRE SUPPORT, RIBBED INNER DIAMETER, METRIC (Stabilized: Aug 2013)
8/29/2013 - PDF - English -
Learn More€54.00 -
SAE AS 12801-7:2013-08-07
AS12801 Ring, Sealing, Toroidal, (O-Ring - Inch Series) for General Aerospace Use (Material DTD5603 Grade-80)
8/7/2013 - PDF - English -
Learn More€106.00 -
SAE AS 12800-7:2013-08-07
AS12800 Ring, Sealing, Toroidal (O-Ring -Inch Series) for Use with Tapped Port Bosses to SAE AS5202 (Material DTD5603 Grade-80)
8/7/2013 - PDF - English -
Learn More€100.00 -
€100.00
-
€100.00
-
€100.00
-
€100.00
-
SAE AS 65300-1:2013-07-30
AS65300 Bolt, 100° Countersunk Head, Spiral Drive, MJ Thread, Split Pin Hole Option, Titanium Alloy (1100 MPa, 315°C)
7/30/2013 - PDF - English -
Learn More€106.00 -
SAE AS 14487A:2013-07-09
CLAMP, LOOP, PLASTIC, WIRE SUPPORT, METRIC (Stabilized: Jul 2013)
7/9/2013 - PDF - English -
Learn More€60.00 -
€100.00
-
€118.00
-
€54.00
-
SAE AS 32000AR-3:2013-05-20
AS32000-004AR Amendment Record for Drawing Standard No. AS32000-004
5/20/2013 - PDF - English -
Learn More€100.00 -
€100.00
-
€100.00
-
SAE AS 63280AR-4:2013-04-01
AS63280AR Amendment Record for Drawing Standard No. AS63280-289
4/1/2013 - PDF - English -
Learn More€100.00 -
€100.00
-
€100.00
-
€100.00
-
€39.00
-
€47.00
-
€39.00
-
€39.00
-
€39.00
-
SAE MA 7211A:2018-08-23
Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100, Metric Procurement Specification For
12/10/2012 - PDF - English -
Learn More€75.00 -
BS SP 8:1939+A7:2012
Specification for turnbuckles (tension rod type) for aircraft purposes
11/30/2012 - PDF - English -
Learn More€151.00 -
SAE AS 7210A:2018-08-23
Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification for
11/19/2012 - PDF - English -
Learn More€70.00 -
€47.00
-
SAE AS 7211A:2018-08-23
Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification
11/19/2012 - PDF - English -
Learn More€70.00 -
€47.00
-
€79.00
-
€54.00
-
SAE TS 82AR-5:2012-11-01
TS82-AR Amendment Record for Technical Specification No. TS82
11/1/2012 - PDF - English -
Learn More€100.00 -
SAE TS 70AR-5:2012-11-01
TS70-AR Amendment Record for Technical Specification No .TS70
11/1/2012 - PDF - English -
Learn More€100.00 -
€31.00
-
€151.00
-
€100.00
-
€100.00
-
SAE AS 43013-5:2012-08-28
AS43013 Ring, Sealing, Toroidal (O-Ring - Inch Series) for General Aerospace Use
8/28/2012 - PDF - English -
Learn More€106.00 -
SAE AS 43003-4:2012-08-28
AS43003 Ring, Sealing, Toroidal (O-Ring - Inch Series) for use with Tapped Port Bosses to SAE AS5202
8/28/2012 - PDF - English -
Learn More€100.00 -
SAE AS 44691AR-3:2012-06-21
AS44691-694AR Amendment Record for Drawing Standard No. AS44691-694
6/21/2012 - PDF - English -
Learn More€100.00 -
€100.00
-
€100.00
-
€100.00
-
SAE AS 26080AR-6:2012-05-01
AS26080-AR Amendment Record for Drawing Standard No. AS26080-084
5/1/2012 - PDF - English -
Learn More€100.00 -
UNE-EN 3417:2012 (R2018)
Aerospace series - Rivets, solid, universal head, in nickel base alloy NI-P11, metric series (Endorsed by AENOR in April of 2012.)
4/1/2012 - PDF - English -
Learn More€35.00 -
€100.00
-
€100.00
-
BS EN 3426:2006
Aerospace series. Groove dimensions for axial mounting external type retaining rings
9/30/2011 - PDF - English -
Learn More€151.00 -
BS EN 3427:2006
Aerospace series. Groove dimensions for radial mounting retaining rings
9/30/2011 - PDF - English -
Learn More€151.00 -
BS EN 3425:2006
Aerospace series. Groove dimensions for axial mounting internal type retaining rings
9/30/2011 - PDF - English -
Learn More€151.00 -
DIN EN 3238:2011-04
Aerospace series - Metallic materials - Test method - Shear test for wires and rivets, German and English version EN 3238:2010
4/1/2011 - PDF - English, German -
Learn More€59.63 -
€100.00
-
SAE ESC 76-5:2011-03-01
ESC76 Backshell Assembly, 90°, RFI / EMI Cone Grounding, 100% Anti-Decoupling
3/1/2011 - PDF - English -
Learn More€106.00 -
€89.00
-
SAE AS 63420-5:2011-01-01
AS63420-423 Nut, Self-Locking, Shank, Flange Restrained (Waspaloy, Silver Coated Thread Only)
1/1/2011 - PDF - English -
Learn More€100.00 -
SAE AS 63420AR-5:2011-01-01
AS63420AR Amendment Record for Drawing Standard No. AS63420-423
1/1/2011 - PDF - English -
Learn More€100.00 -
BS EN 3238:2010
Aerospace series. Metallic materials. Test method. Shear test for wires and rivets
11/30/2010 - PDF - English -
Learn More€151.00 -
NBN EN 3238:2010
Aerospace series - Metallic materials - Test method - Shear test for wires and rivets
11/26/2010 - PDF - German -
Learn More€58.00 -
NBN EN 3238:2010
Aerospace series - Metallic materials - Test method - Shear test for wires and rivets
11/26/2010 - PDF - English -
Learn More€58.00 -
UNE-EN 3238:2010
Aerospace series - Metallic materials - Test method - Shear test for wires and rivets (Endorsed by AENOR in November of 2010.)
11/1/2010 - PDF - English -
Learn More€46.00 -
DIN EN 4115:2010-10
Aerospace series - Cushion, rubber for clamps - Dimensions, masses, German and English version EN 4115:2010
10/1/2010 - PDF - English, German -
Learn More€59.63 -
BS EN 4115:2010
Aerospace series. Cushion, rubber for clamps. Dimensions, masses
7/31/2010 - PDF - English -
Learn More€151.00 -
NBN EN 4115:2010
Aerospace series - Cushion, rubber for clamps - Dimensions, masses
5/19/2010 - PDF - German -
Learn More€58.00 -
NBN EN 4115:2010
Aerospace series - Cushion, rubber for clamps - Dimensions, masses
5/19/2010 - PDF - English -
Learn More€58.00 -
UNE-EN 4115:2010
Aerospace series - Cushion, rubber for clamps - Dimensions, masses (Endorsed by AENOR in May of 2010.)
5/1/2010 - PDF - English -
Learn More€42.00 -
SAE AS 46772-4:2010-04-01
AS46772 Lead, Electrical (for Static Bonding Purposes) Unsuitable for Lightning Strike Purposes
4/1/2010 - PDF - English -
Learn More€100.00 -
€100.00
-
SAE AS 46771AR-5:2010-03-01
AS46771AR Amendment Record for Drawing Standard No. AS46771-AR
3/1/2010 - PDF - English -
Learn More€100.00 -
SAE AS 46772AR-5:2010-03-01
AS46772AR Amendment Record for Drawing Standard No. AS46772-AR
3/1/2010 - PDF - English -
Learn More€100.00 -
NF EN 4536-2, L31-608-002 (01/2010)
Aerospace series - Bushes, plain in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2 : dimensions and loads - Inch series - Série aérospatiale
1/1/2010 - Paper - English, French -
Learn More€78.50 -
NF EN 4537-2, L31-609-002 (11/2009)
Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2 : dimensions and loads - Inch series - Série aérospatiale
11/1/2009 - Paper - English, French -
Learn More€90.00 -
SAE AS 65110-2:2009-10-13
AS65110 Nut, Self Locking, Shank, Flange Restrained 0.1900-32UNJF-3B BS.A346 (ISO3161). Based on AS63476 with 1g, 2g, 3g and 6g of Additional Mass
10/13/2009 - PDF - English -
Learn More€100.00 -
SAE AS 65111-2:2009-10-13
AS65111 Nut, Self Locking, Shank, Flange Restrained 0.2500-28UNJF-3B BS.A346 (ISO3161). Based on AS63477 with 2g, 5g, 12g and 18g of Additional Mass
10/13/2009 - PDF - English -
Learn More€100.00 -
SAE AS 65112-2:2009-10-13
AS65112 Nut, Self Locking, Shank, Flange Restrained 0.3125-24UNJF–3B BS.A346 (ISO3161). Based on AS63478 with 2g, 5g and 14g of Additional Mass
10/13/2009 - PDF - English -
Learn More€100.00 -
UNE-EN 2606:2009 (R2018)
Aerospace series - 60° interface for adaptors, threaded, with lockring - Geometric configuration (Endorsed by AENOR in September of 2009.)
9/1/2009 - PDF - English -
Learn More€35.00 -
SAE AGS 3442-3:2009-08-13
AGS3442 Pipe Warning Symbol Bands for Use in Hot Zones (1/2" Wide)
8/13/2009 - PDF - English -
Learn More€100.00 -
SAE AGS 2090-5:2009-08-13
AGS2090 Pipe Identification Band for Use in Hot Zones (1.0" Wide)
8/13/2009 - PDF - English -
Learn More€100.00 -
SAE AGS 2094-5:2009-08-13
AGS2094 Flow Direction Indicator Bands for Use in Hot Zones (1/2" Wide)
8/13/2009 - PDF - English -
Learn More€100.00 -
SAE AGS 2088-5:2009-08-13
AGS2088 Pipe Identification Band for Use in Hot Zones (1 1/4" Wide)
8/13/2009 - PDF - English -
Learn More€100.00 -
SAE AGS 3441-3:2009-08-13
AGS3441 Pipe Identification Band for Use in Hot Zones (1/2" Wide)
8/13/2009 - PDF - English -
Learn More€100.00 -
SAE AGS 2092-5:2009-08-13
AGS2092 Pipe Identification Band for Use in Hot Zones (3/4" Wide)
8/13/2009 - PDF - English -
Learn More€100.00 -
SAE RS 681-2:2009-08-13
RS681 Directions for Application of P.T.F.E. Impregnated Marker Tape
8/13/2009 - PDF - English -
Learn More€100.00 -
UNE-EN 2116:2009
Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
UNE-EN 3115:2009
Aerospace series - Aluminium alloy 7050-T73 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
UNE-EN 2117:2009
Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
UNE-EN 2115:2009
Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
DIN EN 4302:2009-01
Aerospace series - Open ring insert tool, square drive; German and English version EN 4302:2008
1/1/2009 - PDF - English, German -
Learn More€72.80 -
DIN EN 4355:2009-01
Aerospace series - Six lobe recess - Drivers, socket; German and English version EN 4355:2008
1/1/2009 - PDF - English, German -
Learn More€59.63 -
DIN EN 3710:2008-12
Aerospace series - Sockets, bi-hexagonal - Technical specification; German and English version EN 3710:2008
12/1/2008 - PDF - English, German -
Learn More€65.89 -
DIN EN 3711:2008-12
Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset; German and English version EN 3711:2008
12/1/2008 - PDF - English, German -
Learn More€65.89 -
DIN EN 3819:2008-12
Aerospace series - Clearance for wrenches and sockets; German and English version EN 3819:2008
12/1/2008 - PDF - English, German -
Learn More€59.63 -
NBN EN 3916:2008
Aerospace series - Insert, thin wall - Salvage procedure for components
11/26/2008 - PDF - German -
Learn More€89.00 -
€58.00
-
NBN EN 3915:2008
Aerospace series - Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), for salvage of components - Classification: 1 275 MPa (at ambient temperature) / 550 °C - Technical specification
11/26/2008 - PDF - English -
Learn More€121.00 -
€37.00
-
NBN EN 3916:2008
Aerospace series - Insert, thin wall - Salvage procedure for components
11/26/2008 - PDF - English -
Learn More€89.00 -
€58.00