49.030.60 : Rivets
-
BS EN 6050:2025
Aerospace series — Pin, close tolerance, swage locking, 100° countersunk reduced head, shear type, in aluminium alloy 7050, conversion coating — Inch series
1/8/2026 - PDF - English - BSI
Learn More€172.00 -
NBN EN 6050:2025
Aerospace series - Pin, close tolerance, swage locking, 100° countersunk reduced head, shear type, in aluminium alloy 7050, conversion coating - Inch series
12/25/2025 - - - NBN
Learn More€58.00 -
DIN EN 6050:2025-07
Aerospace series - Pin, close tolerance, swage locking, 100° countersunk reduced head, shear type, in aluminium alloy 7050, conversion coating - Inch series, German version ASD-STAN prEN 6050:2025
7/1/2025 - PDF - German - DIN
Learn More€56.17 -
PR NF EN 6104 (02/2025)
Série aérospatiale - Rivets pleins en aluminium ou en alliage d'aluminium - Série en inches - Spécification technique
2/1/2025 - PDF - French - AFNOR
Learn More€59.50 -
DIN EN 6104:2025-01
Aerospace series - Rivets, solid, in aluminium or aluminium alloy - Inch series - Technical specification, English version prEN 6104:2024
1/1/2025 - PDF - English - DIN
Learn More€84.58 -
18/30386841 DC:2024
BS EN 6104. Aerospace series. Rivets, solid, in aluminium or aluminium alloy. Inch series. Technical Specification
11/14/2024 - PDF - English - BSI
Learn More€24.00 -
24/30505142 DC:2024
BS EN 6104 Aerospace series - Rivets, solid, in aluminium or aluminium alloy - Inch series - Technical specification
11/14/2024 - PDF - English - BSI
Learn More€24.00 -
DIN EN 6129:2024-09
Aerospace series - Blind bolt, protruding head, high strength, pulltype, English version prEN 6129:2024
9/1/2024 - PDF - English - DIN
Learn More€77.20 -
24/30495770 DC:2024
BS EN 6129 Aerospace series - Blind bolt, protruding head, high strength, pulltype
7/25/2024 - PDF - English - BSI
Learn More€24.00 -
DIN EN 6069:2024-01
Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series, German and English version EN 6069:2022
1/1/2024 - PDF - English, German - DIN
Learn More€84.58 -
DIN EN 6052:2023-09
Aerospace series - Rivet-collar-system, aluminium alloy, shear type, inch series - Technical Specification, German and English version EN 6052:2022
9/1/2023 - PDF - English, German - DIN
Learn More€105.42 -
DIN EN 6080:2023-08
Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series, German and English version EN 6080:2022
8/1/2023 - PDF - English, German - DIN
Learn More€84.58 -
DIN EN 6081:2023-08
Aerospace series - Rivet, universal head, close tolerance - Inch series, German and English version EN 6081:2022
8/1/2023 - PDF - English, German - DIN
Learn More€84.58 -
DIN EN 6101:2023-08
Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series, German and English version EN 6101:2022
8/1/2023 - PDF - English, German - DIN
Learn More€84.58 -
23/30471635 DC:2023
BS EN 6050. Aerospace series. Pin, close tolerance, swage locking, 100° countersunk reduced head, shear type, in aluminium alloy 7050, conversion coating. Inch series
3/16/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 6081:2022 + Redline
Tracked Changes. Aerospace series. Rivet, universal head, close tolerance. Inch series
1/24/2023 - PDF - English - BSI
Learn More€283.00 -
BS EN 6080:2022 + Redline
Tracked Changes. Aerospace series. Rivet, 100° normal flush head, close tolerance. Inch series
1/23/2023 - PDF - English - BSI
Learn More€283.00 -
BS EN 6069:2022 + Redline
Tracked Changes. Aerospace series. Rivet, 100° reduced flush head, close tolerance. Inch series
1/17/2023 - PDF - English - BSI
Learn More€283.00 -
BS EN 6101:2022 + Redline
Tracked Changes. Aerospace series. Rivet, 100° medium flush head, close tolerance. Inch series
1/17/2023 - PDF - English - BSI
Learn More€283.00 -
BS EN 6081:2022
Aerospace series. Rivet, universal head, close tolerance. Inch series
1/12/2023 - PDF - English - BSI
Learn More€201.00 -
BS EN 6080:2022
Aerospace series. Rivet, 100° normal flush head, close tolerance. Inch series
1/9/2023 - PDF - English - BSI
Learn More€201.00 -
BS EN 6069:2022
Aerospace series. Rivet, 100° reduced flush head, close tolerance. Inch series
1/9/2023 - PDF - English - BSI
Learn More€201.00 -
BS EN 6101:2022
Aerospace series. Rivet, 100° medium flush head, close tolerance. Inch series
1/4/2023 - PDF - English - BSI
Learn More€201.00 -
NBN EN 6069:2022
Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series
12/22/2022 - PDF - French - NBN
Learn More€89.00 -
NBN EN 6101:2022
Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series
12/22/2022 - PDF - French - NBN
Learn More€89.00 -
NBN EN 6081:2022
Aerospace series - Rivet, universal head, close tolerance - Inch series
12/22/2022 - PDF - French - NBN
Learn More€89.00 -
NBN EN 6080:2022
Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series
12/22/2022 - PDF - French - NBN
Learn More€89.00 -
NBN EN 6101:2022
Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series
12/22/2022 - PDF - German - NBN
Learn More€89.00 -
NBN EN 6080:2022
Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series
12/22/2022 - PDF - German - NBN
Learn More€89.00 -
NBN EN 6081:2022
Aerospace series - Rivet, universal head, close tolerance - Inch series
12/22/2022 - PDF - German - NBN
Learn More€89.00 -
NBN EN 6069:2022
Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series
12/22/2022 - PDF - German - NBN
Learn More€89.00 -
NBN EN 6080:2022
Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series
12/22/2022 - PDF - English - NBN
Learn More€89.00 -
NBN EN 6069:2022
Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series
12/22/2022 - PDF - English - NBN
Learn More€89.00 -
NBN EN 6101:2022
Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series
12/22/2022 - PDF - English - NBN
Learn More€89.00 -
NBN EN 6081:2022
Aerospace series - Rivet, universal head, close tolerance - Inch series
12/22/2022 - PDF - English - NBN
Learn More€89.00 -
NF EN 6069, L21-419 (12/2022)
Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series
12/1/2022 - PDF - French - AFNOR
Learn More€65.33 -
NF EN 6080, L21-045 (12/2022)
Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series
12/1/2022 - PDF - French - AFNOR
Learn More€64.00 -
NF EN 6081, L21-046 (12/2022)
Aerospace series - Rivet, universal head, close tolerance - Inch series
12/1/2022 - PDF - French - AFNOR
Learn More€65.33 -
NF EN 6101, L21-111 (12/2022)
Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series
12/1/2022 - PDF - French - AFNOR
Learn More€65.33 -
BS EN 6052:2022
Aerospace series. Rivet-collar-system, aluminium alloy, shear type, inch series. Technical Specification
11/1/2022 - PDF - English - BSI
Learn More€281.00 -
NBN EN 6052:2022
Aerospace series - Rivet-collar-system, aluminium alloy, shear type, inch series - Technical Specification
10/28/2022 - PDF - French - NBN
Learn More€121.00 -
NBN EN 6052:2022
Aerospace series - Rivet-collar-system, aluminium alloy, shear type, inch series - Technical Specification
10/28/2022 - PDF - German - NBN
Learn More€121.00 -
NBN EN 6052:2022
Aerospace series - Rivet-collar-system, aluminium alloy, shear type, inch series - Technical Specification
10/28/2022 - PDF - English - NBN
Learn More€121.00 -
UNE-EN 6052:2022
Aerospace series - Rivet-collar-system, aluminium alloy, shear type, inch series - Technical Specification (Endorsed by Asociación Española de Normalización in December of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€68.00 -
UNE-EN 6069:2022
Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN 6080:2022
Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN 6081:2022
Aerospace series - Rivet, universal head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN 6101:2022
Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€62.00 -
NF EN 6052, L21-047 (10/2022)
Série aérospatiale - Système rivet-collier, alliage d'aluminium, type cisaillement, série en inches - Spécification technique
10/1/2022 - PDF - French - AFNOR
Learn More€80.00 -
SAE AS 3661:2020-04-06
BOLT, MACHINE, DOUBLE HEXAGON, EXTENDED WASHER HEAD , PD SHANK, NICKEL ALLOY, UNS N07718, 220 KSI MIN
4/6/2020 - PDF - English - SAE
Learn More€90.00 -
ASD-STAN prEN 6069:2020
Aerospace series — Rivet, 100° reduced countersunk head, close tolerance — Inch series
3/30/2020 - PDF - English - ASD-STAN
Learn More€84.00 -
ASD-STAN prEN 6080:2020
Aerospace series — Rivet, 100° countersunk head, close tolerance — Inch series
3/30/2020 - PDF - English - ASD-STAN
Learn More€84.00 -
ASD-STAN prEN 6081:2020
Aerospace series — Rivet, universal head, close tolerance — Inch series
3/30/2020 - PDF - English - ASD-STAN
Learn More€84.00 -
BS 3SP 157-163:2019
Aerospace series. Rivets, solid, universal head, imperial diameters in metric units, aluminium alloys (colour coded) and nickel-copper alloy, cadmium plated or natural finish. Specification
10/24/2019 - PDF - English - BSI
Learn More€201.00 -
DIN EN 6129:2017-04
Aerospace series - Blind bolt, protruding head, high strength, pulltype, German and English version EN 6129:2016 + AC:2017
4/1/2017 - PDF - English, German - DIN
Learn More€63.27 -
BS EN 6129:2016
Aerospace series. Blind bolt, protruding head, high strength, pulltype
3/31/2017 - PDF - English - BSI
Learn More€201.00 -
UNE-EN 6129:2016/AC:2017
Aerospace series - Blind bolt, protruding head, high strength, pulltype (Endorsed by Asociación Española de Normalización in February of 2017.)
2/1/2017 - PDF - English - AENOR
Learn More€0.00 -
NBN EN 6129:2016
Aerospace series - Blind bolt, protruding head, high strength, pulltype
10/26/2016 - - - NBN
Learn More€58.00 -
UNE-EN 6129:2016
Aerospace series - Blind bolt, protruding head, high strength, pulltype (Endorsed by AENOR in October of 2016.)
10/1/2016 - PDF - English - AENOR
Learn More€46.00 -
BS ISO 12289:2016
Aerospace. Rivets, solid, in corrosion-resisting steel. Procurement specification
2/29/2016 - PDF - English - BSI
Learn More€201.00 -
ISO 12289:2016 (R2021)
Aerospace — Rivets, solid, in corrosion-resisting steel — Procurement specification
2/17/2016 - PDF - English - ISO
Learn More€77.00 -
SAE AS 9208C:2015-06-22
BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A (Stabilized: Jun 2015)
6/22/2015 - PDF - English - SAE
Learn More€68.00 -
BS 2SP 87 and 2SP 88:1973+A3:2015
Aerospace series. 100° countersunk head high nickel-copper alloy rivets
1/31/2015 - PDF - English - BSI
Learn More€172.00 -
BS 2SP 81 and 2SP 82:1973+A3:2015
Specification for snap head high nickel-copper alloy rivets
1/31/2015 - PDF - English - BSI
Learn More€172.00 -
BS 2SP 68 to BS 2SP 71:1973+A3:2015
Specification for 100° countersunk precision head aluminium and aluminium alloy rivets
1/31/2015 - PDF - English - BSI
Learn More€201.00 -
BS 2SP 77 to 2SP 80:1973+A4:2015
Specification for snap head aluminium and aluminium alloy rivets
1/31/2015 - PDF - English - BSI
Learn More€172.00 -
€172.00 -
BS SP 142-143:1973+A3:2013
Specification for solid rivets with 100° countersunk truncated radiused head made from BS L 86 (SP 142) and BS L 37 (SP 143) materials
5/31/2013 - PDF - English - BSI
Learn More€172.00 -
UNE-EN 3718:2012
Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
10/24/2012 - - - AENOR
Learn MoreFrom: €60.00 -
€172.00 -
NBN EN 3718:2012
Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
5/25/2012 - PDF - French - NBN
Learn More€89.00 -
NBN EN 3718:2012
Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
5/25/2012 - PDF - German - NBN
Learn More€89.00 -
NBN EN 3718:2012
Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
5/25/2012 - PDF - English - NBN
Learn More€89.00 -
DIN EN 3417:2012-05
Aerospace series - Rivets, solid, universal head, in nickel base alloy NI-P11, metric series, German and English version EN 3417:2012
5/1/2012 - PDF - English, German - DIN
Learn More€56.17 -
BS EN 3718:2012
Aerospace series. Test method for metallic materials. Ultrasonic inspection of tubes
4/30/2012 - PDF - English - BSI
Learn More€201.00 -
NBN EN 3417:2012
Aerospace series - Rivets, solid, universal head, in nickel base alloy NI-P11, metric series
4/20/2012 - PDF - French - NBN
Learn More€58.00 -
NBN EN 3417:2012
Aerospace series - Rivets, solid, universal head, in nickel base alloy NI-P11, metric series
4/20/2012 - PDF - German - NBN
Learn More€58.00 -
NBN EN 3417:2012
Aerospace series - Rivets, solid, universal head, in nickel base alloy NI-P11, metric series
4/20/2012 - PDF - English - NBN
Learn More€58.00 -
UNE-EN 3417:2012 (R2018)
Aerospace series - Rivets, solid, universal head, in nickel base alloy NI-P11, metric series (Endorsed by AENOR in April of 2012.)
4/1/2012 - PDF - English - AENOR
Learn More€35.00 -
BS EN 3417:2012
Aerospace series. Rivets, solid, universal head, in nickel base alloy NI-P11, metric series
3/31/2012 - PDF - English - BSI
Learn More€172.00 -
DIN EN 2941:2009-07
Aerospace series - Nickel alloy rivets - Technical specification, German and English version EN 2941:2008
7/1/2009 - PDF - English, German - DIN
Learn More€63.27 -
DIN EN 2898:2009-06
Aerospace series - Corrosion and heat resisting steel rivets - Technical specification, German and English version EN 2898:2008
6/1/2009 - PDF - English, German - DIN
Learn More€63.27 -
ASD-STAN prEN 3419:2009
Rivets, solid, 100° normal countersunk head, in nickel base alloy NI-P11, metric series
4/30/2009 - PDF - English - ASD-STAN
Learn More€7.55 -
NBN EN 2941:2008
Aerospace series - Nickel alloy rivets - Technical specification
11/26/2008 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2898:2008
Aerospace series - Corrosion and heat resisting steel rivets - Technical specification
11/26/2008 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2941:2008
Aerospace series - Nickel alloy rivets - Technical specification
11/26/2008 - PDF - English - NBN
Learn More€58.00 -
NBN EN 2898:2008
Aerospace series - Corrosion and heat resisting steel rivets - Technical specification
11/26/2008 - PDF - English - NBN
Learn More€58.00 -
NF EN 2941, L21-283 (08/2008)
Aerospace series - Nickel alloy rivets - Technical specification - Série aérospatiale
8/1/2008 - PDF - French - AFNOR
Learn More€72.33 -
UNE-EN 2898:2008
Aerospace series - Corrosion and heat resisting steel rivets - Technical specification (Endorsed by AENOR in May of 2008.)
5/1/2008 - PDF - English - AENOR
Learn More€42.00 -
UNE-EN 2941:2008
Aerospace series - Nickel alloy rivets - Technical specification (Endorsed by AENOR in May of 2008.)
5/1/2008 - PDF - English - AENOR
Learn More€46.00 -
BS EN 2898:2008
Aerospace series. Corrosion and heat resisting steel rivets. Technical specification
4/30/2008 - PDF - English - BSI
Learn More€172.00 -
BS EN 2941:2008
Aerospace series. Nickel alloy rivets. Technical specification
4/30/2008 - PDF - English - BSI
Learn More€172.00 -
DIN EN 4402:2007-01
Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4402:2006
1/1/2007 - PDF - English, German - DIN
Learn More€91.03 -
DIN EN 4401:2006-09
Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4401:2006
9/1/2006 - PDF - English, German - DIN
Learn More€91.03 -
DIN EN 4172:2006-08
Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4172:2006
8/1/2006 - PDF - English, German - DIN
Learn More€91.03 -
DIN EN 4173:2006-08
Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4173:2006
8/1/2006 - PDF - English, German - DIN
Learn More€91.03 -
UNE-EN 4172:2006 (R2017)
Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C (Endorsed by AENOR in July of 2006.)
7/1/2006 - PDF - English - AENOR
Learn More€35.00 -
UNE-EN 4173:2006 (R2017)
Aerospace series - Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C (Endorsed by AENOR in July of 2006.)
7/1/2006 - PDF - English - AENOR
Learn More€35.00 -
NBN EN 4173:2006
Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C
6/19/2006 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4173:2006
Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C
6/19/2006 - PDF - English - NBN
Learn More€58.00 -
NBN EN 4172:2006
Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C
6/19/2006 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4172:2006
Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C
6/19/2006 - PDF - English - NBN
Learn More€58.00 -
BS EN 4173:2006
Aerospace series. Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C
4/28/2006 - PDF - English - BSI
Learn More€172.00 -
UNE-EN 3138:2002 (R2017)
Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series.
4/23/2002 - - - AENOR
Learn MoreFrom: €53.00 -
UNE-EN 3140:2002 (R2017)
Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series.
4/23/2002 - - - AENOR
Learn MoreFrom: €53.00 -
UNE-EN 3139:2002 (R2017)
Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series.
4/23/2002 - - - AENOR
Learn MoreFrom: €53.00 -
DIN EN 3138:2001-10
Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series, German version EN 3138:2001
10/1/2001 - PDF - German - DIN
Learn More€56.17 -
DIN EN 3139:2001-10
Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series, German version EN 3139:2001
10/1/2001 - PDF - German - DIN
Learn More€56.17 -
DIN EN 3140:2001-10
Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series, German version EN 3140:2001
10/1/2001 - PDF - German - DIN
Learn More€56.17 -
BS EN 3138:2001
Aerospace series. Rivets, solid 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series
9/15/2001 - PDF - English - BSI
Learn More€172.00 -
BS EN 3140:2001
Aerospace series. Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series
9/15/2001 - PDF - English - BSI
Learn More€172.00 -
NBN EN 3140:2001
Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series
9/14/2001 - PDF - French - NBN
Learn More€37.00 -
NBN EN 3140:2001
Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series
9/14/2001 - PDF - German - NBN
Learn More€37.00 -
NBN EN 3140:2001
Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series
9/14/2001 - PDF - English - NBN
Learn More€37.00 -
NBN EN 3139:2001
Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series
9/14/2001 - PDF - French - NBN
Learn More€37.00 -
NBN EN 3139:2001
Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series
9/14/2001 - PDF - German - NBN
Learn More€37.00 -
NBN EN 3139:2001
Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series
9/14/2001 - PDF - English - NBN
Learn More€37.00 -
NBN EN 3138:2001
Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series
9/14/2001 - PDF - French - NBN
Learn More€37.00 -
NBN EN 3138:2001
Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series
9/14/2001 - PDF - German - NBN
Learn More€37.00 -
NBN EN 3138:2001
Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series
9/14/2001 - PDF - English - NBN
Learn More€37.00 -
BS EN 3139:2001
Aerospace series. Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series
7/15/2001 - PDF - English - BSI
Learn More€172.00 -
BS ISO 10299:2000
Aerospace. Rivets, solid. Material and metric series identification
2/15/2001 - PDF - English - BSI
Learn More€172.00 -
NF L21-215 (09/2000)
Fasteners - Rivets, solid, universal head - Éléments de fixation
9/1/2000 - PDF - French - AFNOR
Learn More€27.33 -
€27.33
-
ISO 10299:2000 (R2019)
Aerospace — Rivets, solid — Material and metric series identification
8/17/2000 - - - ISO
Learn More€51.00 -
NF L21-273 (08/2000)
Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10 - Éléments de fixation
8/1/2000 - PDF - French - AFNOR
Learn More€27.33 -
NF L21-272 (08/2000)
Fasteners - Lockbolts, 100° countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024 - Éléments de fixation
8/1/2000 - PDF - French - AFNOR
Learn More€36.67 -
NF L21-274 (08/2000)
Fasteners - Lockbolts, 100° countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10 - Éléments de fixation
8/1/2000 - PDF - French - AFNOR
Learn More€27.33 -
NF L21-271 (08/2000)
Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024 - Éléments de fixation
8/1/2000 - PDF - French - AFNOR
Learn More€27.33 -
BS A 351:2000
Rivets, solid, in nickel alloy. Procurement specification
4/15/2000 - PDF - English - BSI
Learn More€180.00 -
BS A 352:2000
Rivets, solid, in titanium or titanium alloy. Procurement specification
4/15/2000 - PDF - English - BSI
Learn More€201.00 -
€172.00 -
ISO 12288:2000
Aerospace — Rivets, solid, in nickel alloy — Procurement specification
3/2/2000 - - - ISO
Learn More€77.00 -
ISO 12290:2000
Aerospace — Rivets, solid, in titanium or titanium alloy — Procurement specification
2/24/2000 - - - ISO
Learn More€77.00 -
BS A 361:2000
Rivets, solid, 100° normal countersunk head, in metallic material, with or without surface treatment. Dimensions
1/15/2000 - PDF - English - BSI
Learn More€172.00 -
€51.00
-
ISO 12281:1999 (R2021)
Aerospace — Rivets, solid, 100 degrees normal countersunk head, in metallic material, with or without surface treatment — Dimensions
10/21/1999 - - - ISO
Learn More€51.00 -
BS SP 172:1999
Rivets, solid, in aluminium or aluminium alloys. Procurement specification
2/15/1999 - PDF - English - BSI
Learn More€180.00 -
€172.00 -
ISO 9418:1998
Aerospace — Rivets, solid, in aluminium or aluminium alloys — Procurement specification
11/26/1998 - - - ISO
Learn More€77.00 -
€51.00
-
BS A 326:1998
Rivets, solid, 100° normal countersunk head with dome, metallic material, with or without surface treatment. Dimensions
7/15/1998 - PDF - English - BSI
Learn More€151.00 -
ISO 3230:1998 (R2019)
Aerospace — Rivets, solid, 100 degrees normal countersunk head with dome, metallic material, with or without surface treatment — Dimensions
3/12/1998 - - - ISO
Learn More€51.00 -
DIN ISO 5845-2:1997-04
Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 2: Rivets for aerospace equipment (ISO 5845-2:1995)
4/1/1997 - PDF - German - DIN
Learn More€56.17 -
BS EN 3642:1997
Rivets, solid, 100° countersunk normal head, with dome, in titanium TI-PO2, anodized, inch based series
1/15/1997 - PDF - English - BSI
Learn More€172.00 -
BS EN 3644:1997
Rivets, solid, universal head, in titanium TI-PO2, anodized, inch based series
1/15/1997 - PDF - English - BSI
Learn More€172.00 -
BS EN 3643:1997
Rivets, solid, 100° countersunk normal head, in titanium TI-PO2, anodized, inch based series
1/15/1997 - PDF - English - BSI
Learn More€172.00 -
DIN EN 3642:1996-11
Aerospace series - Rivets, solid, 100° countersunk normal head, with dome, in titanium TI-PO2, anodized - Inch based series; German version EN 3642:1996
11/1/1996 - PDF - German - DIN
Learn More€63.27 -
DIN EN 3643:1996-11
Aerospace series - Rivets, solid, 100° countersunk normal head, in titanium TI-PO2, anodized - Inch based series; German version EN 3643:1996
11/1/1996 - PDF - German - DIN
Learn More€63.27 -
DIN EN 3644:1996-11
Aerospace series - Rivets, solid, universal head, in titanium TI-PO2, anodized - Inch based series; German version EN 3644:1996
11/1/1996 - PDF - German - DIN
Learn More€63.27 -
BS EN 2149:1996
Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series
9/15/1996 - PDF - English - BSI
Learn More€172.00 -
BS EN 3136:1996
Rivets, solid, universal head, in corrosion resisting steel FE-PA92HT, passivated, inch based series
7/15/1996 - PDF - English - BSI
Learn More€172.00 -
BS EN 3135:1996
Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated, inch based series
6/15/1996 - PDF - English - BSI
Learn More€172.00 -
BS EN 3141:1996
Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, cadmium plated, inch based series
6/15/1996 - PDF - English - BSI
Learn More€151.00 -
BS EN 3142:1996
Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series
6/15/1996 - PDF - English - BSI
Learn More€151.00 -
DIN EN 2149:1996-05
Aerospace series - Rivets, solid, universal head, in aluminium alloy 5056A, anodised or chromated, inch based series; German version EN 2149:1996
5/1/1996 - PDF - German - DIN
Learn More€77.20 -
DIN EN 3135:1996-04
Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated, inch based series; German version EN 3135:1996
4/1/1996 - PDF - German - DIN
Learn More€63.27 -
DIN EN 3136:1996-04
Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA92HT, passivated, inch based series; German version EN 3136:1996
4/1/1996 - PDF - German - DIN
Learn More€63.27 -
DIN EN 3141:1996-04
Aerospace series - Rivets, solid, universal head, in head resisting nickel base alloy NI-P11, cadmium plated, inch based series; German version EN 3141:1996
4/1/1996 - PDF - German - DIN
Learn More€63.27 -
DIN EN 3142:1996-04
Aerospace series - Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series; German version EN 3142:1996
4/1/1996 - PDF - German - DIN
Learn More€63.27 -
ISO 5845-2:1995 (R2020)
Technical drawings — Simplified representation of the assembly of parts with fasteners
10/26/1995 - - - ISO
Learn More€77.00 -
BS EN 2144:1993
Rivets, solid, universal head, in aluminium alloy 2117, inch based series
12/15/1994 - PDF - English - BSI
Learn More€172.00 -
BS EN 2145:1993
Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series
11/15/1994 - PDF - English - BSI
Learn More€172.00 -
DIN EN 2144:1994-11
Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, inch based series; German version EN 2144:1994
11/1/1994 - PDF - German - DIN
Learn More€63.27 -
DIN EN 2145:1994-11
Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series; German version EN 2145:1994
11/1/1994 - PDF - German - DIN
Learn More€69.91 -
BS A 306:1994
Rivets, solid, universal head, metallic material, with or without surface treatment. Dimensions
8/15/1994 - PDF - English - BSI
Learn More€172.00 -
ISO 8280:1993 (R2021)
Aerospace — Rivets, solid, universal head, metallic material, with or without surface treatment — Dimensions
12/23/1993 - - - ISO
Learn More€51.00 -
DIN 65158:1993-12
Aerospace; blind rivets of aluminium alloy with flat round head self-locking device
12/1/1993 - PDF - German - DIN
Learn More€41.78 -
DIN 65159:1993-12
Aerospace; blind rivets of aluminium alloy with 100° countersunk head and self-locking device
12/1/1993 - PDF - German - DIN
Learn More€41.78 -
DIN 65552:1993-12
Aerospace; blind rivets with 100° countersunk head, corrosion-resisting steel, with mandrel, metric series
12/1/1993 - PDF - English, German - DIN
Learn More€41.78 -
NF L21-207 (07/1993) (R2008)
Fasteners. Identification and marking of standardized rivets. - Éléments de fixation
7/1/1993 - PDF - French - AFNOR
Learn More€27.33 -
DIN EN 2556:1993-04
Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series; German version EN 2556:1992
4/1/1993 - PDF - German - DIN
Learn More€63.27 -
NF EN 2143, L21-311 (04/1993)
Aerospace series. Rivets, solid, universal head, in aluminium 1050A, inch based series. - Série aérospatiale
4/1/1993 - PDF - French - AFNOR
Learn More€27.33 -
NF EN 2553, L21-324 (04/1993)
Aerospace series. Rivets, solid, 100 degrees normal countersunk head with dome, in aluminium alloy 2017A, inch based series. - Série aérospatiale
4/1/1993 - PDF - French - AFNOR
Learn More€37.33 -
NF EN 2550, L21-321 (04/1993)
Aerospace series. Rivets, solid, 100 degrees normal countersunk head, in aluminium 1050A, inch based series. - Série aérospatiale
4/1/1993 - PDF - French - AFNOR
Learn More€28.00 -
DIN EN 2143:1993-03
Aerospace series; rivets, solid, universal head, in aluminium 1050A, inch based series; german version EN 2143:1992
3/1/1993 - PDF - English, German - DIN
Learn More€63.27 -
DIN EN 2146:1993-03
Aerospace series; rivets, solid, universal head, in aluminium alloy 2017A, inch based series; german version EN 2146:1992
3/1/1993 - PDF - English, German - DIN
Learn More€69.91 -
DIN EN 2148:1993-03
Aerospace series; rivets, solid, universal head, in aluminium alloy 5056A, inch based series; german version EN 2148:1992
3/1/1993 - PDF - English, German - DIN
Learn More€63.27 -
DIN EN 2550:1993-03
Aerospace series; rivets, solid, 100° normal countersunk head, in aluminium 1050A, inch based series; german version EN 2550:1992
3/1/1993 - PDF - English, German - DIN
Learn More€56.17 -
DIN EN 2551:1993-03
Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series; german version EN 2551:1992
3/1/1993 - PDF - English, German - DIN
Learn More€69.91 -
DIN EN 2552:1993-03
Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodised or chromated, inch based series; german version EN 2552:1992
3/1/1993 - PDF - English, German - DIN
Learn More€69.91 -
DIN EN 2553:1993-03
Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series; german version EN 2553:1992
3/1/1993 - PDF - English, German - DIN
Learn More€69.91 -
DIN EN 2555:1993-03
Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series; german version EN 2555:1992
3/1/1993 - PDF - German - DIN
Learn More€63.27 -
BS EN 2143:1993
Rivets, solid, universal head, in aluminium 1050A, inch based series
2/15/1993 - PDF - English - BSI
Learn More€172.00 -
BS EN 2146:1993
Rivets, solid, universal head, in aluminium alloy 2017A, inch based series
2/15/1993 - PDF - English - BSI
Learn More€172.00 -
BS EN 2148:1993
Rivets, solid, universal head, in aluminium alloy 5056A, inch based series
2/15/1993 - PDF - English - BSI
Learn More€172.00 -
BS EN 2550:1993
Rivets, solid 100° normal countersunk head, in aluminium 1050A, inch based series
2/15/1993 - PDF - English - BSI
Learn More€172.00 -
BS EN 2551:1993
Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series
2/15/1993 - PDF - English - BSI
Learn More€172.00 -
BS EN 2552:1993
Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series
2/15/1993 - PDF - English - BSI
Learn More€172.00 -
BS EN 2553:1993
Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series
2/15/1993 - PDF - English - BSI
Learn More€172.00 -
BS EN 2555:1993
Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series
2/15/1993 - PDF - English - BSI
Learn More€172.00 -
BS EN 2556:1993
Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series
2/15/1993 - PDF - English - BSI
Learn More€172.00 -
L00-005-02 (02/1991) (R2011)
Aerospace. List of equivalent terms. Part 2 : aerospace rivets. - Aéronautique et espace
2/1/1991 - PDF - French - AFNOR
Learn More€74.00 -
€172.00 -
BS EN 2544:1990
Specification for representation of rivets on drawings for aerospace equipment
9/28/1990 - PDF - English - BSI
Learn More€172.00 -
€155.00
-
DIN EN 2544:1989-09
Aerospace series; representation of rivets on drawings for aerospace equipment; german version EN 2544:1987
9/1/1989 - PDF - German - DIN
Learn More€48.79 -
DIN 29924:1989-08
Aerospace; blind rivets of steel with countersunk head 100° and thread locking
8/1/1989 - PDF - German - DIN
Learn More€41.78 -
€102.90
-
DIN 65258:1989-04
Aerospace; rivets, 100° countersunk head, aluminium and aluminium alloys; metric series
4/1/1989 - PDF - English, German - DIN
Learn More€48.79
