49.030 : Fasteners for aerospace construction
-
DIN EN 3685:2019-12
Aerospace series - Bolts in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa/650 °C - Technical specification, German and English version EN 3685:2019
12/1/2019 - PDF - English, German - DIN
Learn More€99.35 -
DIN EN 3740:2019-12
Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<(Index)2> coated - Classification: 1 100 MPa (at ambient temperature)/315 °C, German and English version EN 3740:2019
12/1/2019 - PDF - English, German - DIN
Learn More€59.63 -
UNE-EN 3740:2019
Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 coated - Classification: 1 100 MPa (at ambient temperature)/315 °C (Endorsed by Asociación Española de Normalización in December of 2019.)
12/1/2019 - PDF - English - AENOR
Learn More€42.00 -
UNE-EN 4161:2019
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 PMa (at ambient temperature)/235 °C (Endorsed by Asociación Española de Normalización in December of 2019.)
12/1/2019 - PDF - English - AENOR
Learn More€42.00 -
UNE-EN 4609:2019
Aerospace series - Spiral drive recesses for threaded fasteners - Geometrical definition and technical requirements (Endorsed by Asociación Española de Normalización in December of 2019.)
12/1/2019 - PDF - English - AENOR
Learn More€62.00 -
DIN EN 3299:2019-12
Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification, German and English version EN 3299:2019
12/1/2019 - PDF - English, German - DIN
Learn More€92.62 -
DIN EN 3278:2019-12
Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness), German and English version EN 3278:2019
12/1/2019 - PDF - English, German - DIN
Learn More€59.63 -
UNE-EN 3278:2019
Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness) (Endorsed by Asociación Española de Normalización in December of 2019.)
12/1/2019 - PDF - English - AENOR
Learn More€38.00 -
BS 3A 210:2019
Aerospace series. Nuts, hexagonal, ordinary and thin, Unified threads (below .250 inch) in brass, tin plated. Specification
11/29/2019 - PDF - English - BSI
Learn More€151.00 -
NA 0123:2019
Screw, Close Tolerance, 100 Deg, Reduced Crown Head, Offset Cruciform Recess, Alloy Steel, MPa Shear, Metric
11/29/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NA 0149:2019
INSERT, SCREW THREAD KEY LOCKED, A286 CRES, LIGHTWEIGHT, METRIC
11/29/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 1671:2019
Fasteners - Blind, Internally Threaded, External Sleeve, High Temperature, Protruding Head Self-Locking
11/29/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 1750:2019
Fastener - Blind, Internally Threaded, External Sleeve, General Purpose, Flush Head, Self-Locking 1/64 Oversize
11/29/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 520:2019
COUPLING, FLEXIBLE, LOW PRESSURE, 450 °F AIR LINE
11/29/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 9312:2019
Rivet, Blind, Flanged Dome Head, Mechanically Locked Spindle, Bulbed Style B, Class 4, Code M
11/29/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 9800:2019
HEAD PROTRUSION GAGING, 100° FLUSH HEAD FASTENERS, GAGE BLOCK, GAGE DIAMETERS AND STYLUS
11/29/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 20074:2019
Bolt, Machine, Aircraft, Drilled Head, Coarse Thread
11/29/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 20615:2019
Rivet, Solid-Universal, Head, Brass, Copper, Nickel-Copper Alloy
11/29/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 21224:2019
Nut, Self-Locking, Castellated, Hexagon, Counterbored, Assembled Washer, 250 degrees F, Non-Metallic Insert (for Self-Retaining Bolts)
11/29/2019 - PDF sécurisé - English - NAS
Learn More€55.65 -
NASM 28728/7:2019
Dial, Control, Multiturn Counters, 100 - Turn Counters, 4 - Digit
11/29/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 28728/8:2019
Dial, Control, Multiturn Counters, Vernier, .88 Diameter
11/29/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 51038:2019
Setscrew-Hexagon Socket, Cone Point, Corrosion-Resisting Steel, Passivated, UNC-3A & UNF-3A, Plain and Self Locking
11/29/2019 - PDF sécurisé - English - NAS
Learn More€63.00 -
NBN EN 4609:2019
Aerospace series - Spiral drive recesses for threaded fasteners - Geometrical definition and technical requirements
11/28/2019 - PDF - French - NBN
Learn More€89.00 -
NBN EN 4609:2019
Aerospace series - Spiral drive recesses for threaded fasteners - Geometrical definition and technical requirements
11/28/2019 - PDF - German - NBN
Learn More€89.00 -
NBN EN 4609:2019
Aerospace series - Spiral drive recesses for threaded fasteners - Geometrical definition and technical requirements
11/28/2019 - PDF - English - NBN
Learn More€89.00 -
NBN EN 4161:2019
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 PMa (at ambient temperature)/235 °C
11/28/2019 - PDF - French - NBN
Learn More€58.00 -
NBN EN 4161:2019
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 PMa (at ambient temperature)/235 °C
11/28/2019 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4161:2019
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 PMa (at ambient temperature)/235 °C
11/28/2019 - PDF - English - NBN
Learn More€58.00 -
NBN EN 3740:2019
Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 coated - Classification: 1 100 MPa (at ambient temperature)/315 °C
11/28/2019 - PDF - French - NBN
Learn More€58.00 -
NBN EN 3740:2019
Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 coated - Classification: 1 100 MPa (at ambient temperature)/315 °C
11/28/2019 - PDF - German - NBN
Learn More€58.00 -
NBN EN 3740:2019
Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 coated - Classification: 1 100 MPa (at ambient temperature)/315 °C
11/28/2019 - PDF - English - NBN
Learn More€58.00 -
NBN EN 3278:2019
Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
11/28/2019 - PDF - French - NBN
Learn More€58.00 -
NBN EN 3278:2019
Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
11/28/2019 - PDF - German - NBN
Learn More€58.00 -
NBN EN 3278:2019
Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
11/28/2019 - PDF - English - NBN
Learn More€58.00 -
€47.00
-
SAE AS 3545A:2019-11-21
INSERT, SCREW THREAD, SELF-LOCKING, LOCKED IN, KEY LOCKED, HEAVY-DUTY, SELF-BROACHING KEYS, UNS S66286
11/21/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3546B:2019-11-21
INSERT, SCREW THREAD, SELF-LOCKING LOCKED IN, KEY LOCKED, EXTRA HEAVY DUTY, SELF-BROACHING KEYS, UNS S66286
11/21/2019 - PDF - English - SAE
Learn More€47.00 -
BS EN 4609:2019
Aerospace series. Spiral drive recesses for threaded fasteners. Geometrical definition and technical requirements
11/14/2019 - PDF - English - BSI
Learn More€180.00 -
€47.00
-
€47.00
-
€47.00
-
BS EN 4161:2019
Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1 100 PMa (at ambient temperature)/235 °C
11/8/2019 - PDF - English - BSI
Learn More€151.00 -
€60.00
-
BS EN 3740:2019
Aerospace series. Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 coated. Classification: 1 100 MPa (at ambient temperature)/315 °C
11/4/2019 - PDF - English - BSI
Learn More€151.00 -
BS EN 3278:2019
Aerospace series. Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
11/4/2019 - PDF - English - BSI
Learn More€151.00 -
NF EN 4609, L22-007 (11/2019)
Aerospace series - Spiral drive recesses for threaded fasteners - Geometrical definition and technical requirements
11/1/2019 - Paper - English, French - AFNOR
Learn More€68.50 -
UNE-EN 3685:2019
Aerospace series - Bolts in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa/650 °C - Technical specification (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More€71.00 -
SAE MA 3513A:2019-10-31
BOLT, MACHINE - SPLINE DRIVE, EXTENDED WASHER HEAD, PD SHANK, LONG THREAD, UNS N07001, METRIC
10/31/2019 - PDF - English - SAE
Learn More€83.00 -
SAE AS 4536D:2019-10-31
Safety Cable Kit Procurement Specification and Requirement for Use
10/31/2019 - PDF - English - SAE
Learn More€86.00 -
NAS 1742:2019
Screw, Self-Locking - Pan Head, Full Thread, Patch Type
10/31/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 907:2019
DRILLS, HIGH SPEED STEEL AND COBALT, 1/16 INCH THRU 1/2 INCH
10/31/2019 - PDF sécurisé - English - NAS
Learn More€60.00 -
NAS 9201-9206:2019
Screw, Hex Head, Offset Cruciform-Ribbed Recess, Full Thread, Titanium Alloy 6Al-4V, 160,000 Psi Tensile
10/31/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
BS 2SP 94:2019
Aerospace series. Bushes (plain and flanged), press-fit and thrust washers, oil-retaining sintered bronze. Specification
10/24/2019 - PDF - English - BSI
Learn More€180.00 -
BS 2A 226:2019
Aerospace series. Specification for Bolts, Hexagonal head, Unified short threads below .250 inch, Alloy steel, Cadmium plated. Classification: Rm = 124 000 – 146 000 lbf/in2 (855 – 1 007 MPa) at ambient temp | +190 ºC. Specification
10/24/2019 - PDF - English - BSI
Learn More€151.00 -
BS 3SP 157-163:2019
Aerospace series. Rivets, solid, universal head, imperial diameters in metric units, aluminium alloys (colour coded) and nickel-copper alloy, cadmium plated or natural finish. Specification
10/24/2019 - PDF - English - BSI
Learn More€180.00 -
NBN EN 3685:2019
Aerospace series - Bolts in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa/650 °C - Technical specification
10/23/2019 - PDF - French - NBN
Learn More€142.00 -
NBN EN 3685:2019
Aerospace series - Bolts in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa/650 °C - Technical specification
10/23/2019 - PDF - German - NBN
Learn More€142.00 -
NBN EN 3685:2019
Aerospace series - Bolts in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa/650 °C - Technical specification
10/23/2019 - PDF - English - NBN
Learn More€142.00 -
BS EN 3299:2019
Aerospace series. Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated. Technical specification
10/21/2019 - PDF - English - BSI
Learn More€250.00 -
SAE AS 9697E:2019-10-16
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS N07001, 165 KSI MIN, .2500-28 UNJF-3A
10/16/2019 - PDF - English - SAE
Learn More€47.00 -
SAE TS 128-7:2019-10-16
TS128 "All-Metal" Self-Locking Nuts (UNJ Threads) 1100 MPa (160,000 lbf/in²) Minimum Tensile Strength at Room Temperature
10/16/2019 - PDF - English - SAE
Learn More€194.00 -
SAE AS 9964B:2019-10-15
BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL AMS6322 (UNS G87400), CADMIUM PLATED, .6250-18 UNJF-3A
10/15/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3177B:2019-10-14
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .3750-24 UNJF-3A
10/14/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3179B:2019-10-14
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .5000-20 UNJF-3A
10/14/2019 - PDF - English - SAE
Learn More€47.00 -
€47.00
-
SAE AS 41100-8:2019-10-07
AS41100-109 Nut, Clip, Self-Locking, Floating, Assembly of
10/7/2019 - PDF - English - SAE
Learn More€81.00 -
SAE AS 41100AR-8:2019-10-07
AS41100AR Amendment Record for Drawing Standard No. AS41100-109
10/7/2019 - PDF - English - SAE
Learn More€81.00 -
BS EN 3685:2019
Aerospace series. Bolts in heat resisting steel FE-PA2601 (A286). Classification: 1 100 MPa/650 °C. Technical specification
10/3/2019 - PDF - English - BSI
Learn More€250.00 -
NF EN 4161, L24-169 (10/2019)
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 PMa (at ambient temperature)/235 °C - Série aérospatiale - Vis à tête cylindrique, à empreinte cruciforme déportée, tige normale à tolérance large, filetage long, en acier allié, cadmiées - Classification : 1 100 MPa (à température ambiante) / 235 °C
10/1/2019 - Paper - English, French - AFNOR
Learn More€54.50 -
NF EN 3278, L24-805 (10/2019)
Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
10/1/2019 - Paper - English, French - AFNOR
Learn More€54.50 -
NF EN 3740, L24-102 (10/2019)
Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 coated - Classification : 1 100 MPa (at ambient temperature)/315 °C
10/1/2019 - Paper - English, French - AFNOR
Learn More€54.50 -
BS 2A 254 to 2A 259:2019
Bolts, hexagonal head, close tolerance shank, UNJF threads, split pin &, locking wire hole options, titanium alloy, various finishes. Classification: Rm 1 100-1 250 MPa (160 000-180 000 lbf/in2) at Ambient Temperature | +315°C
9/30/2019 - PDF - English - BSI
Learn More€180.00 -
BS 5A 228:2019
Specification for bolts, double hexagonal heads, optional locking wire holes, unified threads, alloy steel, cadmium plated. Classification: Rm = 1241 MPa (180 000 lbf/in2) at ambient temp | +190°C
9/30/2019 - PDF - English - BSI
Learn More€250.00 -
NAS 1266-1270:2019
BOLT, TENSION, HEX HEAD, CLOSE TOLERANCE, TITANIUM ALLOY, 160 KSI Ftu
9/30/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
€56.00
-
NAS 1670:2019
Fasteners - Blind, Internally Threaded, External Sleeve, General Purpose, Protruding Head Self-Locking
9/30/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 1672:2019
Fastener - Blind, Internally Threaded, External Sleeve, High Temperature, Flush Head Self-Locking
9/30/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 1673:2019
Fastener, Blind, Internally Threaded, External Sleeve, Lightweight, Protruding Head Self-Locking
9/30/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 583-590:2019
Screw, Shear, 100 degree Flush Head, Alloy Steel, 95 KSI Fsu
9/30/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
€60.00
-
SAE AS 9308C:2019-09-25
STUD, SHOULDERED, HEX, WRENCHING, DRILLED, STEEL UNS G87400, CAD, PLATED, 125 KSI MIN, .1900-32 UNF-3A X .1900-32 UNF-3A
9/25/2019 - PDF - English - SAE
Learn More€54.00 -
SAE AS 3178B:2019-09-20
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .4375-20 UNJF-3A
9/20/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9362B:2019-09-20
NUT, PLAIN, HEXAGON, CHECK - UNS S66286, 130 KSI MIN, SILVER PLATED
9/20/2019 - PDF - English - SAE
Learn More€47.00 -
€47.00
-
SAE AS 3176B:2019-09-11
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .3125-24 UNJF-3A
9/11/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3112B:2019-09-10
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES (UNS S66286), .5000-20 UNJF-3A
9/10/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3174B:2019-09-10
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .1900-32 UNJF-3A
9/10/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3175B:2019-09-10
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, 2500-28 UNJF-3A
9/10/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9917B:2019-09-10
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL AMS6322, CADMIUM PLATED, .3750-24 UNJF-3A
9/10/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 6045C:2019-09-04
FITTING, TEE, STANDARD AND REDUCER, FLARELESS, PRECISION TYPE
9/4/2019 - PDF - English - SAE
Learn More€54.00 -
SAE AS 6048C:2019-09-04
FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARELESS, PRECISION TYPE
9/4/2019 - PDF - English - SAE
Learn More€54.00 -
SAE AS 6046C:2019-09-04
FITTING, CROSS, STANDARD AND REDUCER, FLARELESS, PRECISION TYPE
9/4/2019 - PDF - English - SAE
Learn More€54.00 -
NF EN 3685, L24-176 (09/2019)
Aerospace series - Bolts in heat resisting steel FE-PA2601 (A286) - Classification : 1 100 MPa/650 °C - Technical specification
9/1/2019 - Paper - English, French - AFNOR
Learn More€118.00 -
NAS 1051:2019
Safety Hook, Forged Carbon Steel, Snap, Direct Eye (for Ground Support Equipment)
8/30/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
€56.00
-
NAS 1219:2019
Screw, 100 Degrees Flush Head, Dovetail Slot Recess, Full Thread, Self-Locking Optional
8/30/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NBN EN 3299:2019
Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification
8/28/2019 - PDF - French - NBN
Learn More€121.00 -
NBN EN 3299:2019
Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification
8/28/2019 - PDF - German - NBN
Learn More€121.00 -
NBN EN 3299:2019
Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification
8/28/2019 - PDF - English - NBN
Learn More€121.00 -
SAE AS 9359B:2019-08-28
NUT, CASTELLATED, HEXAGON, SILVER PLATED, CRES UNS S66286, 130 KSI MIN
8/28/2019 - PDF - English - SAE
Learn More€47.00 -
SAE TS 22-11:2019-08-20
TS22 Manufacturing Specification for Bolts 1100 MPa (159,000 lbf/in²) Ultimate Tensile Strength Minimum at Room Temperature
8/20/2019 - PDF - English - SAE
Learn More€138.00 -
SAE AS 3530B:2019-08-14
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286 - 160 KSI
8/14/2019 - PDF - English - SAE
Learn More€103.00 -
SAE AS 3531B:2019-08-14
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, DRILLED HEAD, UNS S66286 - 160 KSI
8/14/2019 - PDF - English - SAE
Learn More€103.00 -
€98.00
-
19/30395617 DC:2019
BS 3A 108. Steel bolts (unified hexagons and unified threads) with close tolerance shanks for aircraft
8/8/2019 - PDF - English - BSI
Learn More€24.00 -
ASD-STAN prEN 4496:2019
Aerospace series — Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating — Classification: 1 100 MPa (at ambient temperature)/315 °C
8/5/2019 - PDF - English - ASD-STAN
Learn More€84.00 -
DIN EN 3818:2019-08
Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1100 MPa (at ambient temperature) - Technical specification, German and English version EN 3818:2019
8/1/2019 - PDF - English, German - DIN
Learn More€99.35 -
DIN EN 4852:2019-08
Aerospace series - External spiral drive heads for threaded fasteners - Geometrical definition and fastener head wrenching configuration, German and English version EN 4852:2019
8/1/2019 - PDF - English, German - DIN
Learn More€72.80 -
DIN EN 2868:2019-08
Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal across flats, in heat resisting steel, silver plated - Classification: 1 100 MPa (at ambient temperature)/650 °C, German and English version EN 2868:2019
8/1/2019 - PDF - English, German - DIN
Learn More€52.90 -
UNE-EN 3299:2019
Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification (Endorsed by Asociación Española de Normalización in August of 2019.)
8/1/2019 - PDF - English - AENOR
Learn More€68.00 -
€47.00
-
NAS 2205-2212:2019
Bolt-Lock, Tension, Protruding Head, Stump-Type, Titanium Alloy
7/31/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
€56.00
-
€56.00
-
NASM 83459/2:2019
RIVET, TITANIUM, BIMETAL, 95 KSI Fsu, 100º TENSION CROWN HEAD, TYPE II
7/31/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 9921:2019
Bolts, Shear, Internal Wrenching, Short Thread, Self-Locking and Non-Locking, 6AL-4V Titanium and A286 CRES, 160 KSI FTU
7/31/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 18064:2019
SETSCREW, HEXAGON SOCKET, CUP POINT, 250 °F, SELF-LOCKING ELEMENT, CRES, PASSIVATED
7/31/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
€56.00
-
NASM 43770/9:2019
Snap Hooks, Cast Body, Fixed Loop Eye, Trigger Closure
7/31/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 51958:2019
Screw, Machine-Pan Head, Cross Recessed, Corrosion Resisting Steel, Passivated, Unf-2A
7/31/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
€81.00
-
€66.00
-
€54.00
-
SAE AS 3553B:2019-07-02
NUT, SELF-LOCKING, DOUBLE HEXAGON, SILVER PLATED, COUNTERBORED 180 KSI, 1400 °F, UNS N07001
7/2/2019 - PDF - English - SAE
Learn More€47.00 -
SAE MA 1567C:2019-07-01
Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions for (Stabilized: Jul 2019)
7/1/2019 - PDF - English - SAE
Learn More€101.00 -
DIN EN 3833:2019-07
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambient temperature) / 650 °C - Technical specification, German and English version EN 3833:2019
7/1/2019 - PDF - English, German - DIN
Learn More€104.95 -
DIN EN 2583:2019-07
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa (at ambient temperature)/650 °C - Technical specification, German and English version EN 2583:2019
7/1/2019 - PDF - English, German - DIN
Learn More€104.95 -
UNE-EN 4852:2019
Aerospace series - External spiral drive heads for threaded fasteners - Geometrical definition and fastener head wrenching configuration (Endorsed by Asociación Española de Normalización in July of 2019.)
7/1/2019 - PDF - English - AENOR
Learn More€59.00 -
SAE AS 3129C:2019-07-01
PLUG, EXPANSION - CRES, 303, LONG, STD AND .010 OVERSIZE DIAMETERS, UNS S30300 (Stabilized: Jul 2019)
7/1/2019 - PDF - English - SAE
Learn More€54.00 -
NF EN 3299, L24-430 (07/2019)
Aerospace series - Shaft-nuts and threaded rings, self-locking, right - or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification
7/1/2019 - Paper - English, French - AFNOR
Learn More€98.00 -
DIN EN 2923:2019-07
Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated - Classification: 600 MPa (at ambient temperature)/425 °C, German and English version EN 2923:2019
7/1/2019 - PDF - English, German - DIN
Learn More€52.90 -
DIN EN 2924:2019-07
Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated, left hand thread - Classification: 600 MPa (at ambient temperature)/425 °C, German and English version EN 2924:2019
7/1/2019 - PDF - English, German - DIN
Learn More€52.90 -
SAE AS 4389A:2019-07-01
Nut - Self-Locking Clinch, Serrated Shank, Hole Preparation, Installation and Removal Procedures (Stabilized: Jul 2019)
7/1/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AS 4892B:2019-07-01
Insert, Screw Thread, Self-Locking, UNS S66286, Locked in, Key Locked Procurement Specification for (Stabilized: Jul 2019)
7/1/2019 - PDF - English - SAE
Learn More€119.00 -
SAE AS 5133A:2019-07-01
Nut, Floating, Attached Retention Element (A.R.E.) - Hole Dimensions and Installation Requirements (Stabilized: Jul 2019)
7/1/2019 - PDF - English - SAE
Learn More€60.00 -
DIN EN 2414:2019-07
Aerospace series - Washers, chamfered, with counterbore, in alloy steel, cadmium plated, German and English version EN 2414:2019
7/1/2019 - PDF - English, German - DIN
Learn More€45.98 -
UNE-EN 2114:2019
Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D = 10 mm
7/1/2019 - PDF - English - AENOR
Learn More€38.00 -
NA 0081:2019
Nut, Self-Locking, Plate, Fixed, Corner, Steel, Reduced Rivet Spacing, Low Height, Cbore, 1100 MPa, Metric, 235 Deg C
6/28/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 2105-2112:2019
Bolt-Lock, Tension, 100 Head (NASM 24694), Pull-Type, Titanium Alloy
6/28/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
€56.00
-
NAS 595:2019
Ring - Rigid Tube Connector, Corrosion Resistant Steel
6/28/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 661:2019
Bearings, Ball and Roller, Rod End, Anti-Friction, Airframe
6/28/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 14182:2019
Nut, Self-Locking, Extended Washer, Round, Nickel Alloy 718, 220 Ksi Ftu,450 and 800F, Spine Drive
6/28/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 27576:2019
Bolt, Self-Retaining, Impedance Type, 95 Ksi Fsu, Hex Head, 450F
6/28/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
€56.00
-
NASM 85449/4:2019
Clamp Assembly, Saddle-Type, Cushioned, Ptfe, 321 Cres, -320F to 450F, General Purpose
6/28/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NBN EN 4852:2019
Aerospace series - External spiral drive heads for threaded fasteners - Geometrical definition and fastener head wrenching configuration
6/26/2019 - PDF - French - NBN
Learn More€89.00 -
NBN EN 3818:2019
Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1 100 MPa (at ambient temperature) - Technical specification
6/26/2019 - PDF - French - NBN
Learn More€121.00 -
NBN EN 3818:2019
Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1 100 MPa (at ambient temperature) - Technical specification
6/26/2019 - PDF - German - NBN
Learn More€121.00 -
NBN EN 3818:2019
Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1 100 MPa (at ambient temperature) - Technical specification
6/26/2019 - PDF - English - NBN
Learn More€121.00 -
NBN EN 4852:2019
Aerospace series - External spiral drive heads for threaded fasteners - Geometrical definition and fastener head wrenching configuration
6/26/2019 - PDF - English - NBN
Learn More€89.00 -
19/30397937 DC:2019
BS EN 6117. Aerospace series. Specification for lubrication of fasteners with cetyl alcohol
6/24/2019 - PDF - English - BSI
Learn More€24.00 -
19/30397735 DC:2019
BS EN 2897. Aerospace series. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification. 1 100 MPa (at ambient temperature)/235 °C
6/24/2019 - PDF - English - BSI
Learn More€24.00 -
SAE AS 3255D:2019-06-20
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A
6/20/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3552B:2019-06-20
NUT, SELF-LOCKING, DOUBLE HEXAGON, SILVER PLATED, EXTENDED WRENCH PAD 180 KSI, 1400 °F, UNS N07001
6/20/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9364B:2019-06-20
NUT, SLOTTED, HEXAGON, SHEAR - SILVER PLATED, UNS S66286, 130 KSI MIN
6/20/2019 - PDF - English - SAE
Learn More€47.00 -
SAE MA 3331D:2019-06-20
INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, SCREW LOCKING, CRES, CADMIUM PLATED
6/20/2019 - PDF - English - SAE
Learn More€60.00 -
SAE AS 3123B:2019-06-19
PLUG, EXPANSION - ALUMINUM, 2024-T4 AND 2024-T351, SHORT, STD AND .010 OVERSIZE DIAMETERS, UNS A92024 (Stabilized: Jun 2019)
6/19/2019 - PDF - English - SAE
Learn More€54.00 -
SAE AS 3128C:2019-06-19
PIN, EXPANSION - CRES, 416 OR 416SE, SHORT, UNS S41600/UNS S41623 (Stabilized: Jun 2019)
6/19/2019 - PDF - English - SAE
Learn More€47.00 -
BS EN 4852:2019
Aerospace series. External spiral drive heads for threaded fasteners. Geometrical definition and fastener head wrenching configuration
6/13/2019 - PDF - English - BSI
Learn More€180.00 -
€81.00
-
SAE AS 123751C:2019-06-06
PIN, COTTER - CRES, UNS S30200, AS7210 (Stabilized: Jun 2019)
6/6/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3253D:2019-06-03
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A
6/3/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3410C:2019-06-03
BOLT, TEE HEAD - AMS5662, CHAMFERED, .2500-28 UNJF-3A (STRESS RUPTURE RESISTANT)
6/3/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3412C:2019-06-03
BOLT, TEE HEAD - AMS5662, CHAMFERED, .3750-24 UNJF-3A (STRESS RUPTURE RESISTANT)
6/3/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3532A:2019-06-03
BOLT, SHEAR – DOUBLE HEX HEAD, DRILLED SHANK UNS N07718 – 185 ksi
6/3/2019 - PDF - English - SAE
Learn More€103.00 -
SAE AS 9586C:2019-06-03
BOLT, MACHINE - HEXAGON, DRILLED, 6 HOLES, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A
6/3/2019 - PDF - English - SAE
Learn More€47.00 -
SAE MA 3274A:2019-06-03
NUT – SELF-LOCKING, CLINCH, SERRATED SHANK, 400 °C, DRY FILM COATED, UNS S66286, MJ THREAD, METRIC
6/3/2019 - PDF - English - SAE
Learn More€39.00 -
SAE MA 3330D:2019-06-03
INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, SCREW LOCKING, CRES, DRY FILM LUBRICATED
6/3/2019 - PDF - English - SAE
Learn More€60.00 -
LN 29520:2019-06
Aerospace series - Bolts, double hexagon with nominal tensile strength of 1550 MPa
6/1/2019 - PDF - German - DIN
Learn More€97.01 -
LN 29943:2019-06
Aerospace series - Bolts, hexagon, close tolerance, short thread, of titanium alloy
6/1/2019 - PDF - German - DIN
Learn More€97.01 -
UNE-EN 2583:2019
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa (at ambient temperature)/650°C - Technical specification (Endorsed by Asociación Española de Normalización in June of 2019.)
6/1/2019 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN 3818:2019
Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1 100 MPa (at ambient temperature) - Technical specification (Endorsed by Asociación Española de Normalización in June of 2019.)
6/1/2019 - PDF - English - AENOR
Learn More€69.00 -
LN 9386:2019-06
Aerospace series - Bolts, reduced hexagon head, titanium alloy
6/1/2019 - PDF - German - DIN
Learn More€97.01 -
LN 9339:2019-06
Aerospace series - Twelve point washer nuts, self locking, for temperatures up to 650 °C
6/1/2019 - PDF - German - DIN
Learn More€80.65 -
€97.01
-
DIN EN 2878:2019-06
Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 °C, German and English version EN 2878:2018+AC:2019
6/1/2019 - PDF - English, German - DIN
Learn More€52.90 -
DIN EN 2880:2019-06
Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/120 °C, German and English version EN 2880:2018+AC:2019
6/1/2019 - PDF - English, German - DIN
Learn More€52.90 -
LN 29790:2019-06
Aerospace series - Hexagon nuts with captive washer, self-locking, for temperatures up to 235 °C - Inactive for a new design
6/1/2019 - PDF - German - DIN
Learn More€97.01 -
UNE-EN 2414:2019
Aerospace series - Washers, chamfered, with counterbore, in alloy steel, cadmium plated (Endorsed by Asociación Española de Normalización in June of 2019.)
6/1/2019 - PDF - English - AENOR
Learn More€35.00 -
€56.00
-
€56.00
-
NAS 2506-2512:2019
Bolt-Lock, Shear, 100 Head, Standard and Oversize, Pull-Type, Titanium Alloy
5/31/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 9603-9624:2019
Bolt, Hexagon Head, A286 Cres Close Tolerance, Minimum Major, Long Threads
5/31/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 9934:2019
Aerospace Industries Association Bird Ingestion Working Group Report
5/31/2019 - PDF sécurisé - English - NAS
Learn More€60.00 -
NASM 1312-19:2019
Fastener Test Methods - Method 19 - Fastener Sealing
5/31/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
€56.00
-
€56.00
-
NAS 1726:2019
Nut, Self-Locking, Captive Washer, Shear Type, 450F and 800F
5/31/2019 - PDF sécurisé - English - NAS
Learn More€56.00 -
€56.00
-
SAE AS 3125C:2019-05-29
PLUG, EXPANSION - CRES, 416 OR 416SE, LONG, STD AND .010 OVERSIZE DIAMETERS, UNS S41600/UNS S41623 (Stabilized: May 2019)
5/29/2019 - PDF - English - SAE
Learn More€54.00 -
SAE AS 3127C:2019-05-29
PLUG, EXPANSION - CRES, 416 OR 416SE, SHORT, STD AND .010 OVERSIZE DIAMETERS, UNS S41600/UNS S41623 (Stabilized: May 2019)
5/29/2019 - PDF - English - SAE
Learn More€54.00 -
SAE AS 3126C:2019-05-29
PIN, EXPANSION - CRES, 416 OR 416SE, LONG, UNS S41600/UNS S41623 (Stabilized: May 2019)
5/29/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3502A:2019-05-24
INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED SELF-BROACHING KEYS, UNS S66286
5/24/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3249D:2019-05-24
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A
5/24/2019 - PDF - English - SAE
Learn More€47.00 -
NBN EN 2583:2019
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa (at ambient temperature)/650°C - Technical specification
5/23/2019 - PDF - French - NBN
Learn More€121.00 -
NBN EN 2583:2019
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa (at ambient temperature)/650°C - Technical specification
5/23/2019 - PDF - German - NBN
Learn More€121.00 -
NBN EN 2583:2019
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa (at ambient temperature)/650°C - Technical specification
5/23/2019 - PDF - English - NBN
Learn More€121.00 -
NBN EN 3833:2019
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambient temperature) / 650 °C - Technical specification
5/23/2019 - PDF - French - NBN
Learn More€142.00 -
NBN EN 3833:2019
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambient temperature) / 650 °C - Technical specification
5/23/2019 - PDF - German - NBN
Learn More€142.00