49.030 : Fasteners for aerospace construction
-
PR NF EN 3014, L24-684PR (08/2022)
Série aérospatiale - Écrous à sertir, dentelés, à freinage interne, en acier résistant à chaud FE-PA2601 (A286) - Classification : 1 100 MPa (à température ambiante)/650 °C
8/1/2022 - Paper - English, French - AFNOR
Learn More€56.00 -
DIN EN 3014:2022-08
Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa (at ambient temperature) / 650 °C, English version prEN 3014:2022
8/1/2022 - PDF - English - DIN
Learn More€59.63 -
DIN EN 2942:2022-08
Aerospace series - Insert, MJ screw thread, helical coil, self-locking tanged insertion drive, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated, English version prEN 2942:2022
8/1/2022 - PDF - English - DIN
Learn More€52.90 -
DIN EN 2944:2022-08
Aerospace series - Insert, MJ screw thread, helical coil, self-locking, in corrosion resisting steel FE PA3004, German and English version ASD-STAN prEN 2944:2022
8/1/2022 - PDF - English, German - DIN
Learn More€59.63 -
NA 0160:2022
Screw, Fairing Washer, Assembly, 6AL-4V Titanium Alloy, Offset Cruciform Recess, Full Thread, 1100MPa Tensile, Metric
7/29/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
NA 0245:2022
Insert, Sandwich Panel, Molded In, Blind Threaded, Self-Locking, Cres/Cres, Floating, Metric
7/29/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 1834:2022
Insert, Molded In, Csk and Thru Clearance Hole Sandwich panel
7/29/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
€56.00
-
€56.00
-
€56.00
-
€56.00
-
€56.00
-
NAS 6403-6420:2022
BOLT, TENSION, HEX HEAD, CLOSE TOLERANCE, 6AL-4V TITANIUM ALLOY, SHORT THREAD, REDUCED MAJOR THREAD DIAMETER, SELF-LOCKING AND NONLOCKING, 160 KSI Ftu
7/29/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 16556:2022
Pin, Straight, Headless (Dowel) (.001 Over Nominal Size)
7/29/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 21075:2022
NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, STEEL, 125 KSI Ftu, 450 °F
7/29/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 5501/31:2022
Cap, Circular, ESD, Protective, Electrical Connector
7/29/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
SAE AS 9516D:2022-07-26
SCREW, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .1380-40 UNJF-3A
7/26/2022 - PDF - English - SAE
Learn More€39.00 -
€47.00
-
BS EN 3228:2022 + Redline
Tracked Changes. Aerospace series. Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235 °C
7/22/2022 - PDF - English - BSI
Learn More€197.00 -
SAE AS 3089C:2022-07-19
STUD, STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, UNS G87400 .3750-24 UNJF-3A X .3750-24 UNJF-3A
7/19/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 7458C:2022-07-06
Studs, Steel, Low Alloy, Heat-Resistant Normalized and Tempered, Roll Threaded 135000 psi Tensile Strength
7/6/2022 - PDF - English - SAE
Learn More€98.00 -
ASD-STAN prEN 6052 P4:2022
Aerospace series — Rivet-collar-system, aluminium alloy, shear type, inch series —Technical Specification
7/1/2022 - PDF - English - ASD-STAN
Learn More€115.50 -
22/30204401DC:2022
BS EN 4113. Aerospace series. Clamps, loop ("P" type) in corrosion resisting steel, passivated, with rubber cushioning. Dimensions, masses
6/30/2022 - PDF - English - BSI
Learn More€24.00 -
22/30448405 DC:2022
Aerospace series - Clamps, loop ("P" type) in aluminium alloy, with rubber cushioning - Dimensions, masses
6/30/2022 - PDF - English - BSI
Learn More€24.00 -
€56.00
-
NAS 1674:2022
Fastener - Blind, Internally Threaded, External Sleeve, Lightweight, Flush Head, Millable & Non-Millable, Self-Locking
6/30/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 24693:2022
SCREW, MACHINES, FLAT COUNTERSUNK HEAD, 100 DEGREES, CROSS RECESSED, UNC-2A AND UNF-2A
6/30/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 85449/1:2022
Clamp Assembly, Saddle-Type, Cushioned, NBR Rubber, 321 Cres, 275 Degrees F, Fuel Resistant, General Purpose
6/30/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
SAE AS 3087C:2022-06-27
STUD - STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, UNS G87400 .2500-28 UNJF-3A X .2500-28 UNJF-3A
6/27/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3086C:2022-06-20
STUD - STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, UNS G87400 .1900-32 UNJF-3A X .1900-32 UNJF-3A
6/20/2022 - PDF - English - SAE
Learn More€39.00 -
SAE AS 3088C:2022-06-20
STUD, STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, UNS G87400 .3125-24 UNJF-3A X .3125-24 UNJF-3A
6/20/2022 - PDF - English - SAE
Learn More€47.00 -
BS EN 3228:2022
Aerospace series. Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235 °C
6/13/2022 - PDF - English - BSI
Learn More€151.00 -
€205.00
-
€205.00
-
€205.00
-
SAE AS 151701D:2022-06-09
STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .5000-13 UNS X .4375-20 UNF-3A
6/9/2022 - PDF - English - SAE
Learn More€39.00 -
SAE AS 126587C:2022-06-02
STUD - STRAIGHT, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .3750 - 16 UNS X .3750 - 24 UNF-3A
6/2/2022 - PDF - English - SAE
Learn More€39.00 -
22/30455572 DC:2022
BS EN 3014 Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286). Classification: 1 100 MPa (at ambient temperature) / 650 °C
6/2/2022 - PDF - English - BSI
Learn More€24.00 -
DIN EN 4892:2022-06
Aerospace series - Bolt, External Spiral Drive, flange head, tension and shear application, English version prEN 4892:2022
6/1/2022 - PDF - English - DIN
Learn More€79.72 -
NAS 8802-8816:2022
Bolt, Shear, 100 degree Reduced Head, Ribbed Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread
5/31/2022 - PDF sécurisé - English - NAS
Learn More€55.65 -
SAE AS 3405B:2022-05-24
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5708 (UNS N07001), .2500-28 UNJF-3A
5/24/2022 - PDF - English - SAE
Learn More€47.00 -
BS SP 28 & 29:2021 + Redline
Tracked Changes. Pins, taper, solid (inch series), corrosion resisting steel and cadmium plated alloy steel. Specification
5/23/2022 - PDF - English - BSI
Learn More€197.00 -
SAE AS 91111D:2022-05-20
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A
5/20/2022 - PDF - English - SAE
Learn More€39.00 -
SAE AS 3554D:2022-05-20
NUT, SELF-LOCKING, DOUBLE HEXAGON, SILVER PLATED, REDUCED HEIGHT 180 KSI, 1400 °F, UNS N07001
5/20/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 158901C:2022-05-16
STUD, STEPPED, NECKED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3A (Stabilized: May 2022)
5/16/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 162501C:2022-05-16
STUD, STEPPED, DRILLED, NECKED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G887400, .4375-14 UNS X .3750-24 UNF-3A (Stabilized: May 2022)
5/16/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 3611C:2022-05-16
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN
5/16/2022 - PDF - English - SAE
Learn More€93.00 -
SAE MA 2039B:2022-05-16
PLUG, PORT - MJ THREAD, O-RING SEAL, AMS-5640, METRIC (Stabilized: May 2022)
5/16/2022 - PDF - English - SAE
Learn More€47.00 -
22/30453793 DC:2022
BS EN 2943. Aerospace series. Inserts, MJ and M screw threads, helical coil. Technical specification
5/12/2022 - PDF - English - BSI
Learn More€24.00 -
SAE AS 115851C:2022-05-09
SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .2500-20 UNC - 3A
5/9/2022 - PDF - English - SAE
Learn More€47.00 -
UNE-EN 4853:2022
Aerospace series - Externally threaded fastener, 100° countersunk normal head, Spiral Drive Recess - Classification: 1 100 MPa (at ambient temperature)/425 °C (Endorsed by Asociación Española de Normalización in May of 2022.)
5/1/2022 - PDF - English - AENOR
Learn More€65.00 -
PR NF EN 2942, L24-984PR (05/2022)
Série aérospatiale - Filets rapportés, filetages MJ, à freinage interne, entraînement d'insertion à tenon, en alliage résistant à chaud base nickel NI-PH2801 (Inconel X750), argentés
5/1/2022 - Paper - English, French - AFNOR
Learn More€56.00 -
PR NF EN 4892, L22-016PR (05/2022)
Série aérospatiale - Vis, entraînement extérieur en spirale, tête-embase, application de traction-cisaillement
5/1/2022 - Paper - English, French - AFNOR
Learn More€80.50 -
UNE-EN 4844:2022
Aerospace series - Screws, 100° countersunk normal head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification : 1 100 MPa (at ambient temperature) / 425 °C (Endorsed by Asociación Española de Normalización in May of 2022.)
5/1/2022 - PDF - English - AENOR
Learn More€46.00 -
UNE-EN 4845:2022
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated - Classification: 900 MPa (at ambient temperature)/650 °C (Endorsed by Asociación Española de Normalización in May of 2022.)
5/1/2022 - PDF - English - AENOR
Learn More€46.00 -
UNE-EN 4846:2022
Aerospace series - Screws, pan head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification : 1 100 MPa (at ambient temperature) / 425 °C (Endorsed by Asociación Española de Normalización in May of 2022.)
5/1/2022 - PDF - English - AENOR
Learn More€46.00 -
UNE-EN 4847:2022
Aerospace series - Screw, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C (Endorsed by Asociación Española de Normalización in May of 2022.)
5/1/2022 - PDF - English - AENOR
Learn More€57.00 -
UNE-EN 4848:2022
Aerospace series - Screw, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C (Endorsed by Asociación Española de Normalización in May of 2022.)
5/1/2022 - PDF - English - AENOR
Learn More€57.00 -
UNE-EN 4849:2022
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature)/425 °C (Endorsed by Asociación Española de Normalización in May of 2022.)
5/1/2022 - PDF - English - AENOR
Learn More€58.00 -
UNE-EN 4850:2022
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C (Endorsed by Asociación Española de Normalización in May of 2022.)
5/1/2022 - PDF - English - AENOR
Learn More€59.00 -
UNE-EN 4851:2022
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C (Endorsed by Asociación Española de Normalización in May of 2022.)
5/1/2022 - PDF - English - AENOR
Learn More€46.00 -
UNE-EN 3228:2022
Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C (Endorsed by Asociación Española de Normalización in May of 2022.)
5/1/2022 - PDF - English - AENOR
Learn More€46.00 -
NAS 1199:2022
Rivet, Solid, 100 Degrees Flush Head, A286 Corrosion Resistant Steel
4/29/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
SAE AS 150801E:2022-04-25
STUD, STEPPED. 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A
4/25/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3237E:2022-04-22
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .2500-28 UNJF-3A
4/22/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9821B:2022-04-22
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, CRES (UNS S17400), .5000-20 UNJF-3A
4/22/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9505C:2022-04-14
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A
4/14/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9501D:2022-04-13
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK CRES, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A
4/13/2022 - PDF - English - SAE
Learn More€47.00 -
BS EN 4846:2022
Aerospace series. Screws, pan head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated. Classification : 1 100 MPa (at ambient temperature) / 425 °C
4/11/2022 - PDF - English - BSI
Learn More€151.00 -
BS EN 4853:2022
Aerospace series. Externally threaded fastener, 100° countersunk normal head, Spiral Drive Recess. Classification: 1 100 MPa (at ambient temperature)/425 °C
4/8/2022 - PDF - English - BSI
Learn More€180.00 -
BS EN 4851:2022
Aerospace series. Screw, 100° countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature)/235 °C
4/8/2022 - PDF - English - BSI
Learn More€151.00 -
BS EN 4850:2022
Aerospace series. Screw, 100° countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature)/235 °C
4/8/2022 - PDF - English - BSI
Learn More€180.00 -
BS EN 4849:2022
Aerospace series. Screw, 100° countersunk normal head, Spiral Drive Recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1 100 MPa (at ambient temperature)/425 °C
4/8/2022 - PDF - English - BSI
Learn More€180.00 -
BS EN 4848:2022
Aerospace series. Screw, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature)/315 °C
4/8/2022 - PDF - English - BSI
Learn More€151.00 -
BS EN 4847:2022
Aerospace series. Screw, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature)/235 °C
4/8/2022 - PDF - English - BSI
Learn More€151.00 -
BS EN 4845:2022
Aerospace series. Screw, 100° countersunk normal head, Spiral Drive Recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated. Classification: 900 MPa (at ambient temperature)/650 °C
4/8/2022 - PDF - English - BSI
Learn More€151.00 -
BS EN 4844:2022
Aerospace series. Screws, 100° countersunk normal head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated. Classification : 1 100 MPa (at ambient temperature) / 425 °C
4/8/2022 - PDF - English - BSI
Learn More€151.00 -
NBN EN 3228:2022
Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
4/2/2022 - PDF - French - NBN
Learn More€58.00 -
NBN EN 3228:2022
Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
4/2/2022 - PDF - English - NBN
Learn More€58.00 -
NBN EN 3228:2022
Luft- und Raumfahrt - Flache Sechskantmuttern mit reduzierter Höhe, normale Schlüsselweite, aus Stahl, verkadmet - Klasse: 900 MPa (bei Raumtemperatur)/235 °C
4/2/2022 - PDF - German - NBN
Learn More€58.00 -
SAE AS 9716C:2022-04-01
BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, NICKEL ALLOY (UNS N07001), .3125-24 UNJF-3A
4/1/2022 - PDF - English - SAE
Learn More€47.00 -
ASD-STAN prEN 2944 P3:2022
Aerospace series — Insert, MJ screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
4/1/2022 - PDF - English - ASD-STAN
Learn More€80.00 -
€24.00
-
NAS 1677:2022
Strap, Retaining - Cushioned, Rectangular, Two Piece
3/31/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 1760:2022
Fitting End, Flareless Acorn, Standard Dimensions for
3/31/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
NAS 9703-9724:2022
Bolt, Hexagon Head, Alloy Steel Close Tolerance, Minimum Major, Long Threads
3/31/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 21060:2022
Nut, Self-Locking, Plate, Two Lug, Floating, Low Height, Cres, 125 Ksi Ftu, 450 Degrees F & 800 Degrees F
3/31/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
SAE AS 3144B:2022-03-29
STUD, STEPPED, 2.5 DIA ENGAGEMENT, PD SHANK, AMS5731, .5625-18 UNJF-3A X .500-20 UNJF-3A
3/29/2022 - PDF - English - SAE
Learn More€47.00 -
NBN EN 4853:2022
Aerospace series - Externally threaded fastener, 100° countersunk normal head, Spiral Drive Recess - Classification: 1 100 MPa (at ambient temperature)/425 °C
3/26/2022 - PDF - French - NBN
Learn More€121.00 -
NBN EN 4853:2022
Aerospace series - Externally threaded fastener, 100° countersunk normal head, Spiral Drive Recess - Classification: 1 100 MPa (at ambient temperature)/425 °C
3/26/2022 - PDF - English - NBN
Learn More€121.00 -
NBN EN 4853:2022
Luft- und Raumfahrt - Verbindungselement mit Außengewinde, 100°-Senkkopf, mit Spiral-Antrieb - Klasse: 1 100 MPa (bei Raumtemperatur)/425 °C
3/26/2022 - PDF - German - NBN
Learn More€121.00 -
NBN EN 4844:2022
Aerospace series - Screws, 100° countersunk normal head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification : 1 100 MPa (at ambient temperature) / 425 °C
3/26/2022 - PDF - French - NBN
Learn More€58.00 -
NBN EN 4845:2022
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated - Classification: 900 MPa (at ambient temperature)/650 °C
3/26/2022 - PDF - French - NBN
Learn More€58.00 -
NBN EN 4846:2022
Aerospace series - Screws, pan head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification : 1 100 MPa (at ambient temperature) / 425 °C
3/26/2022 - PDF - French - NBN
Learn More€58.00 -
NBN EN 4848:2022
Aerospace series - Screw, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C
3/26/2022 - PDF - French - NBN
Learn More€58.00 -
NBN EN 4848:2022
Aerospace series - Screw, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C
3/26/2022 - PDF - English - NBN
Learn More€58.00 -
NBN EN 4850:2022
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C
3/26/2022 - PDF - French - NBN
Learn More€89.00 -
NBN EN 4850:2022
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C
3/26/2022 - PDF - English - NBN
Learn More€89.00 -
NBN EN 4851:2022
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C
3/26/2022 - PDF - French - NBN
Learn More€58.00 -
NBN EN 4851:2022
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C
3/26/2022 - PDF - English - NBN
Learn More€58.00 -
NBN EN 4849:2022
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature)/425 °C
3/26/2022 - PDF - French - NBN
Learn More€58.00 -
NBN EN 4849:2022
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature)/425 °C
3/26/2022 - PDF - English - NBN
Learn More€58.00 -
NBN EN 4847:2022
Aerospace series - Screw, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C
3/26/2022 - PDF - French - NBN
Learn More€58.00 -
NBN EN 4844:2022
Luft- und Raumfahrt - 100° Senkkopfschraube mit Spiral-Antrieb, Gewinde annähernd bis Kopf, aus korrosionsbeständigem und hochwarmfestem Stahl, passiviert - Klasse: 1 100 MPa (bei Raumtemperatur)/425 °C
3/26/2022 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4845:2022
Luft- und Raumfahrt - 100° Senkkopfschraube mit Spiral-Antrieb, kurzes Gewinde, aus hochwarmfestem Stahl FE PA2601 (A286), passiviert - Klasse: 900 MPa (bei Raumtemperatur)/650 °C
3/26/2022 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4846:2022
Luft- und Raumfahrt - Flachkopfschraube mit Spiral-Antrieb, Gewinde annähernd bis Kopf, aus korrosionsbeständigem und hochwarmfestem Stahl, passiviert - Klasse: 1 100 MPa (bei Raumtemperatur)/425 °C
3/26/2022 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4848:2022
Luft- und Raumfahrt - Flachkopfschraube mit Spiral-Antrieb, grobe Schafttoleranz, mittlere Gewindelänge, aus Titanlegierung, anodisiert, MoS2-geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur)/315 °C
3/26/2022 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4850:2022
Luft- und Raumfahrt - 100°-Senkkopfschraube mit Spiral-Antrieb, grobe Schafttoleranz, mittlere Gewindelänge, aus legiertem Stahl, kadmiert - Klasse: 1 100 MPa (bei Raumtemperatur)/235 °C
3/26/2022 - PDF - German - NBN
Learn More€89.00 -
NBN EN 4851:2022
Luft- und Raumfahrt - 100°-Senkkopfschraube, Spiral-Antrieb, grobe Schafttoleranz, langes Gewinde, aus legiertem Stahl, kadmiert - Klasse: 1 100 MPa (bei Raumtemperatur)/235 °C
3/26/2022 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4849:2022
Luft- und Raumfahrt - 100° Senkschraube mit Spiral Antrieb, enge Schafttoleranz, kurzes Gewinde, aus Titanlegierung, Aluminium IVD beschichtet - Klasse: 1 100 MPa (bei Raumtemperatur)/425 °C
3/26/2022 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4847:2022
Luft- und Raumfahrt - Flachkopfschraube mit Spiral-Antrieb, grobe Schafttoleranz, mittlere Gewindelänge, aus legiertem Stahl, verkadmet - Klasse: 1 100 MPa (bei Raumtemperatur)/235 °CC
3/26/2022 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4844:2022
Aerospace series - Screws, 100° countersunk normal head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification : 1 100 MPa (at ambient temperature) / 425 °C
3/26/2022 - PDF - English - NBN
Learn More€58.00 -
NBN EN 4845:2022
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated - Classification: 900 MPa (at ambient temperature)/650 °C
3/26/2022 - PDF - English - NBN
Learn More€58.00 -
NBN EN 4846:2022
Aerospace series - Screws, pan head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification : 1 100 MPa (at ambient temperature) / 425 °C
3/26/2022 - PDF - English - NBN
Learn More€58.00 -
NBN EN 4847:2022
Aerospace series - Screw, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C
3/26/2022 - PDF - English - NBN
Learn More€58.00 -
SAE AS 9588C:2022-03-16
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A
3/16/2022 - PDF - English - SAE
Learn More€39.00 -
SAE AS 7478F:2022-03-16
Bolts and Screws, Steel, UNS S66286 Classification: 130 ksi/1200 °F 1800 °F Solution Heat Treated, Aged After Roll Threaded Procurement Specification for
3/16/2022 - PDF - English - SAE
Learn More€107.00 -
SAE MA 3449A:2022-03-15
BOLT, SPLINE DRIVE EXTENDED WASHER HEAD, REDUCED HEAD, RETAINER LOCKED, PD SHANK, AMS5708, METRIC
3/15/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 9698D:2022-03-09
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), 165 KSI MIN, .3125-24 UNJF-3A
3/9/2022 - PDF - English - SAE
Learn More€39.00 -
SAE AS 3404B:2022-03-02
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5708 (UNS N07001), .1900-32 UNJF-3A
3/2/2022 - PDF - English - SAE
Learn More€39.00 -
SAE AGS 4677-4:2022-03-02
AGS4677 INSERT, SCREW THREAD, METRIC, SCREW LOCKING, HELICAL COIL, CORROSION RESISTANT STEEL DTD734, CADMIUM PLATED
3/2/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 63450-2:2022-03-02
AS63450-459 NUT, SELF-LOCKING, EXTENDED WASHER, DOUBLE HEXAGON
3/2/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 64379-2:2022-03-02
AS64379-380 NUT, SELF LOCKING, EXTENDED WASHER, DOUBLE HEXAGON - FOR USE WITH IMPEDANCE TYPE BOLTS
3/2/2022 - PDF - English - SAE
Learn More€100.00 -
€168.00
-
NF EN 4844, L22-008 (03/2022)
Série aérospatiale - Vis à tête fraisée normale 100°, empreinte en spirale, filetée jusqu'à proximité de la tête, en acier résistant à chaud et à la corrosion, passivée - Classification : 1 100 MPa (à température ambiante)/425 °C
3/1/2022 - Paper - English, French - AFNOR
Learn More€54.50 -
NF EN 4845, L22-009 (03/2022)
Série aérospatiale - Vis à tête fraisée normale 100°, empreinte en spirale, filetage court, en acier résistant à chaud FE-PA2601 (A286), passivée - Classification : 900 MPa (à température ambiante)/650 °C
3/1/2022 - Paper - English, French - AFNOR
Learn More€54.50 -
NF EN 4846, L22-010 (03/2022)
Série aérospatiale - Vis à tête cylindrique, empreinte en spirale, filetée jusqu'à proximité de la tête, en acier résistant à chaud et à la corrosion, passivée - Classification : 1 100 MPa (à température ambiante)/425 °C
3/1/2022 - Paper - English, French - AFNOR
Learn More€54.50 -
NF EN 4847, L22-011 (03/2022)
Série aérospatiale - Vis à tête cylindrique, empreinte en spirale, tige normale à tolérance large, filetage moyen, en acier allié, cadmiée - Classification : 1 100 MPa (à température ambiante)/235 °C
3/1/2022 - Paper - English, French - AFNOR
Learn More€68.50 -
NF EN 4849, L22-013 (03/2022)
Série aérospatiale - Vis à tête fraisée normale 100°, empreinte en spirale, tige normale à tolérance large, filetage court, en alliage de titane, revêtue d'aluminium IVD - Classification : 1 100 MPa (à température ambiante)/425 °C
3/1/2022 - Paper - English, French - AFNOR
Learn More€68.50 -
NF EN 4850, L22-014 (03/2022)
Série aérospatiale - Vis à tête fraisée normale 100°, empreinte en spirale, tige normale à tolérance large, filetage moyen, en acier allié, cadmiée - Classification : 1 100 MPa (à température ambiante)/235 °C
3/1/2022 - Paper - English, French - AFNOR
Learn More€68.50 -
NF EN 4851, L22-015 (03/2022)
Série aérospatiale - Vis à tête fraisée normale 100°, empreinte en spirale, tige normale à tolérance large, filetage long, en acier allié, cadmiée - Classification : 1 100 MPa (à température ambiante)/235 °C
3/1/2022 - Paper - English, French - AFNOR
Learn More€54.50 -
NF EN 4848, L22-012 (03/2022)
Série aérospatiale - Vis à tête cylindrique, empreinte en spirale, tige normale à tolérance large, filetage moyen, en alliage de titane, anodisée, lubrifiée au MoS2 - Classification : 1 100 MPa (à température ambiante)/315 °C
3/1/2022 - Paper - English, French - AFNOR
Learn More€68.50 -
NF EN 4853, L24-025 (03/2022)
Série aérospatiale - Elément de fixation à filetage extérieur, tête fraisée normale 100°, empreinte en spirale - Classification : 1 100 MPa (à température ambiante)/425 °C
3/1/2022 - Paper - English, French - AFNOR
Learn More€90.00 -
SAE AS 7455C:2022-03-01
Bolts and Screws, Steel, Low Alloy, Heat Resistant Hardened and Tempered, Roll Threaded
3/1/2022 - PDF - English - SAE
Learn More€105.00 -
SAE AS 9587C:2022-03-01
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .4375-20 UNJF-3A
3/1/2022 - PDF - English - SAE
Learn More€47.00 -
NF EN 3228, L24-522 (03/2022)
Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification : 900 MPa (at ambient temperature)/235 °C
3/1/2022 - Paper - English, French - AFNOR
Learn More€68.50 -
DIN EN 3542:2022-03
Aerospace series - Inserts, MJ screw threads, helical coil, self-locking, tanged insertion drive, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), English version prEN 3542:2021
3/1/2022 - PDF - English - DIN
Learn More€52.90 -
NF EN 3077, L46-019 (03/2022)
Série aérospatiale - Colliers à vis tangente - Spécification technique
3/1/2022 - Paper - English, French - AFNOR
Learn More€68.50 -
22/30451863 DC:2022
BS EN 2942. Aerospace series. Insert, MJ screw thread, helical coil, self-locking tanged insertion drive, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated
2/24/2022 - PDF - English - BSI
Learn More€24.00 -
SAE AS 3413C:2022-02-23
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, UNS N07718, 185 KSI, .1900-32 UNJF-3A (STRESS RUPTURE RESISTANT)
2/23/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3414C:2022-02-23
BOLT, MACHINE - HEXAGON HEAD, PD SHANK UNS N07718, 185 KSI, .2500-28 UNJF-3A (STRESS RUPTURE RESISTANT)
2/23/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9584C:2022-02-23
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A
2/23/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 121501C:2022-02-16
NUT, PLAIN - HEXAGON, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN
2/16/2022 - PDF - English - SAE
Learn More€47.00 -
€60.00
-
NAS 9945-2:2022
Airworthiness engineering training and education - civil aviation
2/14/2022 - PDF sécurisé - English - NAS
Learn More€60.00 -
NAS 9945-3:2022
Airworthiness engineering training and education - defense and military
2/14/2022 - PDF sécurisé - English - NAS
Learn More€60.00 -
NASM 51963:2022
Setscrew, Hexagon Socket, Cup Point, Alloy Steel, Cadmium Plated, Unc-3A, Plain and Self-Locking
2/14/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
€100.00
-
SAE TS 23-10:2022-02-04
TS23 MANUFACTURING SPECIFICATION FOR BOLTS (UNIFIED THREADS)
2/4/2022 - PDF - English - SAE
Learn More€168.00 -
€100.00
-
SAE AS 9928C:2022-02-02
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A
2/2/2022 - PDF - English - SAE
Learn More€47.00 -
PR NF EN 3542, L24-98PR (02/2022)
Série aérospatiale - Inserts, filets de vis MJ, bobine hélicoïdale, autobloquants, entraînement par insertion à brides, en alliage à base de nickel résistant à la chaleur NI-PH2801 (Inconel X750)
2/1/2022 - Paper - English, French - AFNOR
Learn More€56.00 -
SAE AS 3309C:2022-02-01
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), .3750-24 UNJF-3A
2/1/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9805B:2022-01-28
BOLT, MACHINE-HEXAGON HEAD, PD SHANK, CORROSION RESISTANT STEEL (UNS S17400), .1900-32 UNJF-3A
1/28/2022 - PDF - English - SAE
Learn More€39.00 -
SAE AS 155001C:2022-01-27
STUD, STEPPED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A (Stabilized: Jan 2022)
1/27/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 9528C:2022-01-27
SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, .1640-36 UNJF-3A
1/27/2022 - PDF - English - SAE
Learn More€39.00 -
SAE AS 9529C:2022-01-27
BOLT, MACHINE - STEEL UNS G87400 CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, 1900-32 UNJF-3A
1/27/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9317E:2022-01-14
SCREW, MACHINE - HEXAGON HEAD, SLOTTED, FULL SHANK, ALLOY STEEL, UNS K14675, 135 KSI MIN, .2500-28 UNS-3A
1/14/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9527C:2022-01-14
SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1380-40 UNJF-3A
1/14/2022 - PDF - English - SAE
Learn More€39.00 -
SAE MA 3448A:2022-01-14
BOLT, SPLINE DRIVE SPECIAL EXTENDED WASHER HEAD, REDUCED HEAD, PD SHANK, AMS5708, METRIC
1/14/2022 - PDF - English - SAE
Learn More€60.00 -
PR NF EN 2944, L24-985PR (01/2022)
Série aérospatiale - Filet rapporté, à freinage interne, en acier résistant à la corrosion FE-PA3004
1/1/2022 - Paper - English, French - AFNOR
Learn More€56.00 -
ATA Spec 105:2022 - Single-user
Guidelines for Training and Qualifying Personnel in Nondestructive Testing Methods
1/1/2022 - PDF - English - ATA
Learn More€314.00 -
SAE TS 138-8:2021-12-29
TS138 Manufacturing Specification for Inserts, Imperial, Thinwall, Screw Locking, (Inconel® 718), Silver Coated
12/29/2021 - PDF - English - SAE
Learn More€143.00 -
SAE MA 1573B:2021-12-28
Nut, Self-Locking - Steel, Class 1100 MPa/235 °C, MJ Thread Procurement Specification For, Metric (Stabilized: Dec 2021)
12/28/2021 - PDF - English - SAE
Learn More€133.00 -
SAE AS 3650C:2021-12-21
BOLT, MACHINE - DOUBLE HEX HEAD, REDUCED SHANK, UNS N07718 - 185 KSI
12/21/2021 - PDF - English - SAE
Learn More€79.00 -
€47.00
-
NAS 563-572:2021
Bolt-Full Threaded, 160 Ksi Steel, Drilled Head
12/16/2021 - PDF sécurisé - English - NAS
Learn More€56.00 -
€60.00
-
NASM 14181:2021
BOLT, TENSION, NICKEL ALLOY 718, 220 KSI Ftu, EXTERNAL WRENCHING, SPLINE DRIVE, FLANGED HEAD
12/16/2021 - PDF sécurisé - English - NAS
Learn More€56.00 -
SAE MA 4189A:2021-12-15
SCREW, MACHINE, 100° CSK, FLAT HEAD, OFFSET CRUCIFORM RECESS, FULL SHANK, UNS S66286, MJ THREAD, METRIC
12/15/2021 - PDF - English - SAE
Learn More€98.00 -
21/30448050 DC:2021
BS EN 3542. Aerospace series. Inserts, screw threads, helical coil, self-locking, tanged insertion drive, in heat resisting nickel base alloy NI-PH2801 (Inconel X750)
12/9/2021 - PDF - English - BSI
Learn More€24.00 -
SAE AS 9292C:2021-12-01
SCREW, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .1380-40 UNJF-3A
12/1/2021 - PDF - English - SAE
Learn More€39.00 -
SAE AS 9296C:2021-12-01
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A
12/1/2021 - PDF - English - SAE
Learn More€47.00 -
LN 1481:2021-12
Aerospace series - Spring pins - Heavy duty, Text in German and English
12/1/2021 - PDF - English, German - DIN
Learn More€112.62 -
€75.00
-
BS ISO 4579:2021
Aerospace. Drives, internal, TORX PARALOBE drive. Geometrical definition, gaging and technical requirements
11/23/2021 - PDF - English - BSI
Learn More€180.00 -
BS ISO 4580:2021
Aerospace. Drives, internal, TORX PARALOBE driver bit. Geometrical definition, gaging and technical requirements
11/23/2021 - PDF - English - BSI
Learn More€180.00 -
SAE AS 152901C:2021-11-23
STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A (Stabilized: Nov 2021)
11/23/2021 - PDF - English - SAE
Learn More€54.00 -
SAE AS 155301C:2021-11-23
STUD, STEPPED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3750-16 UNS X .3125-24 UNF-3A (Stabilized: Nov 2021)
11/23/2021 - PDF - English - SAE
Learn More€54.00 -
SAE AS 155901C:2021-11-23
STUD, STEPPED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .5000-13 UNS X .4375-20 UNF-3A (Stabilized: Nov 2021)
11/23/2021 - PDF - English - SAE
Learn More€47.00 -
SAE RS 678-7:2021-11-23
RS678 FASTENERS, ROLLED THREADS, CHAMFERS, LEAD THREADS & RUNOUTS
11/23/2021 - PDF - English - SAE
Learn More€96.00 -
€96.00
-
SAE AS 7472B:2021-11-09
Bolts and Screws, Steel, Corrosion Resistant 125000 psi Tensile Strength Roll Threaded
11/9/2021 - PDF - English - SAE
Learn More€101.00 -
SAE MA 3446B:2021-11-09
BOLT, MACHINE - TEE HEAD, CHAMFERED CLASSIFICATION: 1210 MPA/730 °C CLOSE TOL SHANK, UNS N07001, METRIC
11/9/2021 - PDF - English - SAE
Learn More€79.00 -
€96.00
-
SAE AS 9294C:2021-11-03
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A
11/3/2021 - PDF - English - SAE
Learn More€39.00 -
€56.00
-
€55.65
-
SAE AS 7482C:2021-10-28
Studs, Steel, UNS S66286 Tensile Strength 130 ksi 1800 °F Solution Heat Treated, Aged Before Roll Threading Procurement Specification
10/28/2021 - PDF - English - SAE
Learn More€107.00 -
21/30445574 DC:2021
BS EN 2944. Series. Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
10/28/2021 - PDF - English - BSI
Learn More€24.00 -
21/30445592 DC:2021
BS EN 2882. Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature) / 235 °C
10/28/2021 - PDF - English - BSI
Learn More€24.00 -
SAE AS 151401D:2021-10-12
STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3A (Stabilized: Oct 2021)
10/12/2021 - PDF - English - SAE
Learn More€47.00 -
SAE MA 3353D:2021-10-12
NUT, SELF LOCKING – SPLINE DRIVE, EXTENDED WASHER, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC (Stabilized: Oct 2021)
10/12/2021 - PDF - English - SAE
Learn More€54.00 -
SAE AS 9286C:2021-10-01
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A
10/1/2021 - PDF - English - SAE
Learn More€47.00 -
DIN 65545:2021-10
Aerospace series - Nuts, hexagon, with MJ thread, self-locking, corrosion-resisting steel, class: 1 100 MPa/120 °C, Text in German and English
10/1/2021 - PDF - English, German - DIN
Learn More€45.98 -
BS SP 28 & 29:2021
Pins, taper, solid (inch series), corrosion resisting steel and cadmium plated alloy steel. Specification
9/30/2021 - PDF - English - BSI
Learn More€151.00 -
BS SP 31 & 32:2021
Pins, taper, split (inch series), corrosion resisting steel and cadmium plated alloy steel. Specification
9/30/2021 - PDF - English - BSI
Learn More€151.00 -
€56.00
-
€60.00
-
SAE AS 9285C:2021-09-21
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A
9/21/2021 - PDF - English - SAE
Learn More€47.00