49.030 : Fasteners for aerospace construction
-
SAE AS 46778-3:2023-05-26
AS46778 Pins, Quick Release, (Ball Type) C.R. Steel, 'L' Handle, Single Acting
5/26/2023 - PDF - English - SAE
Learn More€100.00 -
SAE AS 65113-3:2023-05-26
AS65113 Nut, Self Locking, Shank, Flange Restrained, 0.3750-24UNJF–3B BS.A346 (ISO3161). Based on AS63479 with 3g, 5g and15g of Additional Mass.
5/26/2023 - PDF - English - SAE
Learn More€100.00 -
SAE AS 9212D:2023-05-10
BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER-HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A
5/10/2023 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9576E:2023-05-10
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A
5/10/2023 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9734C:2023-05-10
BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, CRES AMS5643, .3125-24 UNJF-3A
5/10/2023 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3481K:2023-05-10
NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F
5/10/2023 - PDF - English - SAE
Learn More€47.00 -
DIN EN 3228:2023-05
Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C, German and English version EN 3228:2022
5/1/2023 - PDF - English, German - DIN
Learn More€65.89 -
DIN EN 3434:2023-05
Aerospace series - Nuts, hexagon, slotted/castellated, self-locking, in steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C, German version ASD-STAN prEN 3434:2019
5/1/2023 - PDF - German - DIN
Learn More€59.63 -
DIN EN 6050:2023-05
Aerospace series - Pin, close tolerance, swage locking, 100° countersunk reduced head, shear type, in aluminium alloy 7050, conversion coating - Inch series, English version prEN 6050:2023
5/1/2023 - PDF - English - DIN
Learn More€52.90 -
PR NF EN 6050, L21-000PR (05/2023)
Série aérospatiale - Rivet de précision, à bague sertie, à tête fraisée 100° réduite, type cisaillement, en alliage d'aluminium 7050, revêtement de conversion - Série en inches
5/1/2023 - Paper - English, French - AFNOR
Learn More€56.00 -
DIN EN 6051:2023-05
Aerospace series - Collar, swage locking, shear type, in aluminium alloy 3003, conversion coating - Inch series, English version prEN 6051:2023
5/1/2023 - PDF - English - DIN
Learn More€45.98 -
DIN EN 6054:2023-05
Aerospace series - Collar, swage locking, shear type, in aluminium alloy 6061, conversion coating - Inch series, English version prEN 6054:2023
5/1/2023 - PDF - English - DIN
Learn More€45.98 -
UNE-EN 2885:2023
Aerospace series - Screw, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C (Endorsed by Asociación Española de Normalización in April of 2023.)
4/21/2023 - PDF - English - AENOR
Learn More€46.00 -
UNE-EN 2886:2023
Aerospace series - Screw, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C (Endorsed by Asociación Española de Normalización in April of 2023.)
4/21/2023 - PDF - English - AENOR
Learn More€46.00 -
SAE AS 3243E:2023-04-21
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI UTS MIN, .1900-32 UNJF-3A
4/21/2023 - PDF - English - SAE
Learn More€39.00 -
SAE AS 9557F:2023-04-21
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, UTS 130 KSI MIN, .2500-28 UNJF-3A
4/21/2023 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9573D:2023-04-21
SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1640-36 UNJF-3A
4/21/2023 - PDF - English - SAE
Learn More€39.00 -
SAE AS 9685D:2023-04-21
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
4/21/2023 - PDF - English - SAE
Learn More€39.00 -
SAE AS 9895C:2023-04-21
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, DRILLED, CORROSION RESISANT STEEL (UNS S41800), .2500-28 UNJF-3A
4/21/2023 - PDF - English - SAE
Learn More€47.00 -
SAE AS 172201B:2023-04-21
WASHER, KEY - SINGLE, BEARING RETAINING, AMS6350 (UNS G41300)
4/21/2023 - PDF - English - SAE
Learn More€39.00 -
PR NF EN 4013, L24-686PR (04/2023)
Série aérospatiale - Écrous à sertir, à freinage interne, en alliage résistant à chaud à base de nickel NI-PH2601 (Inconel 718), argentés - Classification : 1 550 MPa (à température ambiante ) / 600 °C
4/1/2023 - Paper - English, French - AFNOR
Learn More€56.00 -
DIN EN 3043:2023-04
Aerospace series - Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286) - Classification: 900 MPa/650 °C, manufacturing method optional - Technical specification, English version prEN 3043:2023
4/1/2023 - PDF - English, German - DIN
Learn More€85.79 -
PR NF EN 6054, L23-302PR (04/2023)
Série aérospatiale - Bague à sertir, type cisaillement, en alliage d'aluminium 6061, revêtement de conversion - Série en inches
4/1/2023 - Paper - English, French - AFNOR
Learn More€56.00 -
23/30472048 DC:2023
BS EN 2939. Aerospace series. Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286). Classification. 900 MPa (at ambient temperature)/650 °C
3/27/2023 - PDF - English - BSI
Learn More€24.00 -
23/30472049 DC:2023
BS EN 3672. Aerospace series. Shank nut, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30° swage. Classification. 1 210 MPa (at ambient temperature) / 730 °C
3/27/2023 - PDF - English - BSI
Learn More€24.00 -
19/30397738 DC:2023
BS EN 2939. Aerospace series. Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286). Classification. 900 MPa (at ambient temperature)/650 °C
3/23/2023 - PDF - English - BSI
Learn More€24.00 -
19/30397741 DC:2023
BS EN 3672. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30° swage. Classification. 1 210 MPa (at ambient temperature)/730 °C
3/23/2023 - PDF - English - BSI
Learn More€24.00 -
€141.00
-
SAE AS 3242E:2023-03-20
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A
3/20/2023 - PDF - English - SAE
Learn More€47.00 -
€70.00
-
SAE AS 9705E:2023-03-20
BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, DRILLED, NICKEL ALLOY (UNS N07001), .1900-32 UNJF-3A
3/20/2023 - PDF - English - SAE
Learn More€39.00 -
SAE AS 9732C:2023-03-20
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, UNS S17400, .1900-32 UNJF-3A
3/20/2023 - PDF - English - SAE
Learn More€39.00 -
23/30471635 DC:2023
BS EN 6050. Aerospace series. Pin, close tolerance, swage locking, 100° countersunk reduced head, shear type, in aluminium alloy 7050, conversion coating. Inch series
3/16/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 2886:2023 + Redline
Tracked Changes. Aerospace series. Screw, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235 °C
3/15/2023 - PDF - English - BSI
Learn More€197.00 -
BS EN 2885:2023 + Redline
Tracked Changes. Aerospace series. Screw, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235 °C
3/13/2023 - PDF - English - BSI
Learn More€197.00 -
BS EN 3434:2022
Aerospace series. Nuts, hexagon, slotted/castellated, self-locking, in steel, cadmium plated, MoS2 lubricated. Classification: 900 MPa (at ambient temperature)/235 °C
3/9/2023 - PDF - English - BSI
Learn More€151.00 -
PR NF EN 3043, L24-111PR (03/2023)
Série aérospatiale - Éléments de fixation à filetage extérieur, en acier résistant à chaud FE-PA92HT (A286) - Classification : 900 MPa/650 °C, mode de fabrication non imposé - Spécification technique
3/1/2023 - Paper - English, French - AFNOR
Learn More€88.50 -
NF L22-031 (03/2023)
Éléments de fixation - Sélection des matériaux métalliques
3/1/2023 - Paper - French - AFNOR
Learn More€60.67 -
BS EN 2885:2023
Aerospace series. Screw, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235 °C
2/28/2023 - PDF - English - BSI
Learn More€151.00 -
BS EN 2886:2023
Aerospace series. Screw, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235 °C
2/28/2023 - PDF - English - BSI
Learn More€151.00 -
€56.00 -
NBN EN 2885:2023
Série aérospatiale - Vis à tête cylindrique, à empreinte cruciforme déportée, tige normale à tolérance large, filetage court, en acier allié, cadmiées - Classification: 900 MPa (à température ambiante)/235 °C
2/23/2023 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2886:2023
Série aérospatiale - Vis à tête cylindrique, à empreinte cruciforme déportée, tige normale à tolérance serrée, filetage court, en acier allié, cadmiées - Classification : 900 MPa (à température ambiante)/235 °C
2/23/2023 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2885:2023
Luft- und Raumfahrt - Flachkopfschraube mit Flügelkreuzschlitz, kurzes Gewinde, aus legiertem Stahl, verkadmet - Klasse: 900 MPa (bei Raumtemperatur)/235 °C
2/23/2023 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2886:2023
Luft- und Raumfahrt - Flachkopf-Passschraube mit Flügelkreuzschlitz, kurzes Gewinde, aus legiertem Stahl, verkadmet - Klasse: 900 MPa (bei Raumtemperatur)/235 °C
2/23/2023 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2885:2023
Aerospace series - Screw, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
2/23/2023 - PDF - English - NBN
Learn More€58.00 -
NBN EN 2886:2023
Aerospace series - Screw, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
2/23/2023 - PDF - English - NBN
Learn More€58.00 -
SAE AS 3241E:2023-02-20
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A
2/20/2023 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9555E:2023-02-20
SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, UTS 130 KSI MIN, .1640-36 UNJF-3A
2/20/2023 - PDF - English - SAE
Learn More€39.00 -
SAE AS 9558E:2023-02-20
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, UTS 130 KSI MIN, .3125-24 UNJF-3A
2/20/2023 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9579D:2023-02-20
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A
2/20/2023 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9696G:2023-02-20
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT ALLOY, UNS N07001, 165 KSI MIN, .1900-32 UNJF-3A
2/20/2023 - PDF - English - SAE
Learn More€39.00 -
SAE AS 7460D:2023-02-14
Bolts and Screws, Titanium Alloy 6Al - 4V, UNS R56400 Procurement Specification for
2/14/2023 - PDF - English - SAE
Learn More€107.00 -
SAE AS 7461F:2023-02-14
Bolts and Screws, Titanium Alloy 6Al - 4V, UNS R56400 Fatigue-Rated, Procurement Specification for
2/14/2023 - PDF - English - SAE
Learn More€105.00 -
SAE AS 7471K:2023-02-14
Bolts and Screws, Nickel Alloy, UNS N07001 Tensile Strength 165 ksi, Corrosion- and Heat-Resistant Procurement Specification
2/14/2023 - PDF - English - SAE
Learn More€111.00 -
€54.00
-
23/30468081 DC:2023
BS EN 6051. Aerospace series. Collar, swage locking, shear type, in aluminium alloy 3003, conversion coating. Inch series
2/3/2023 - PDF - English - BSI
Learn More€24.00 -
23/30468084 DC:2023
BS EN 6054. Aerospace series. Collar, swage locking, shear type, in aluminium alloy 6061, conversion coating. Inch series
2/2/2023 - PDF - English - BSI
Learn More€24.00 -
NF EN 2885, L24-183 (02/2023)
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification : 900 MPa (at ambient temperature)/235 °C
2/1/2023 - Paper - French - AFNOR
Learn More€48.00 -
NF EN 2886, L24-184 (02/2023)
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification : 900 MPa (at ambient temperature)/235 °C
2/1/2023 - Paper - French - AFNOR
Learn More€48.00 -
NASM 21072:2023
Nut, Self-Locking, Plate, One-Lug, Reduced Rivet Spacing, Low Height, Cres, 125 Ksi Ftu, 450 Degrees F and 800 Degrees F
1/31/2023 - PDF sécurisé - English - NAS
Learn More€56.00 -
23/30468075 DC:2023
BS EN 4013. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification. 1 550 MPa (at ambient temperature) / 600 °C
1/26/2023 - PDF - English - BSI
Learn More€24.00 -
23/30427317 DC:2023
BS ISO 3186. Aerospace. Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1 250 MPa to 1 800 MPa. Dimensions
1/25/2023 - PDF - English - BSI
Learn More€24.00 -
23/30446465 DC:2023
BS ISO 7481. Aerospace. Nuts, self-locking, with maximum operating temperature less than or equal to 425 °C. Test methods
1/25/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 6081:2022 + Redline
Tracked Changes. Aerospace series. Rivet, universal head, close tolerance. Inch series
1/24/2023 - PDF - English - BSI
Learn More€235.00 -
BS EN 6080:2022 + Redline
Tracked Changes. Aerospace series. Rivet, 100° normal flush head, close tolerance. Inch series
1/23/2023 - PDF - English - BSI
Learn More€235.00 -
23/30467373 DC:2023
BS EN 3043. Aerospace series. Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286). Classification: 900 MPa/650 °C, manufacturing method optional. Technical specification
1/19/2023 - PDF - English - BSI
Learn More€24.00 -
23/30446462 DC:2023
BS ISO 12261. Aerospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
1/18/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 6069:2022 + Redline
Tracked Changes. Aerospace series. Rivet, 100° reduced flush head, close tolerance. Inch series
1/17/2023 - PDF - English - BSI
Learn More€235.00 -
BS EN 6101:2022 + Redline
Tracked Changes. Aerospace series. Rivet, 100° medium flush head, close tolerance. Inch series
1/17/2023 - PDF - English - BSI
Learn More€235.00 -
€87.00
-
SAE AS 9916B:2023-01-13
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL AMS6322, CADMIUM PLATED, .3125-24 UNJF-3A
1/13/2023 - PDF - English - SAE
Learn More€47.00 -
BS EN 6081:2022
Aerospace series. Rivet, universal head, close tolerance. Inch series
1/12/2023 - PDF - English - BSI
Learn More€180.00 -
BS EN 6080:2022
Aerospace series. Rivet, 100° normal flush head, close tolerance. Inch series
1/9/2023 - PDF - English - BSI
Learn More€180.00 -
BS EN 6069:2022
Aerospace series. Rivet, 100° reduced flush head, close tolerance. Inch series
1/9/2023 - PDF - English - BSI
Learn More€180.00 -
BS EN 6101:2022
Aerospace series. Rivet, 100° medium flush head, close tolerance. Inch series
1/4/2023 - PDF - English - BSI
Learn More€180.00 -
€56.00
-
€57.00
-
NBN EN 3434:2022
Série aérospatiale - Écrous hexagonaux à créneaux, à freinage interne, en acier, cadmiés, lubrifiés au MoS2 - Classification : 900 MPa (à température ambiante)/235 °C
12/22/2022 - PDF - French - NBN
Learn More€58.00 -
NBN EN 3434:2022
Aerospace series - Nuts, hexagon, slotted/castellated, self-locking, in steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C
12/22/2022 - PDF - English - NBN
Learn More€58.00 -
NBN EN 6069:2022
Série aérospatiale - Rivets de précision, tête fraisée réduite 100° - Série en inches
12/22/2022 - PDF - French - NBN
Learn More€89.00 -
NBN EN 6101:2022
Série aérospatiale - Rivets de précision, tête fraisée moyenne 100° - Série en inches
12/22/2022 - PDF - French - NBN
Learn More€89.00 -
NBN EN 6081:2022
Série aérospatiale - Rivets de précision, tête universelle - Série en inches
12/22/2022 - PDF - French - NBN
Learn More€89.00 -
NBN EN 6080:2022
Série aérospatiale - Rivets de précision, tête fraisée normale 100° - Série en inches
12/22/2022 - PDF - French - NBN
Learn More€89.00 -
NBN EN 6101:2022
Luft- und Raumfahrt - Vollniet, 100° Medium Senkkopf, enge Toleranz - Inch-Reihe
12/22/2022 - PDF - German - NBN
Learn More€89.00 -
NBN EN 6080:2022
Luft- und Raumfahrt - Vollniet, 100° normaler Senkkopf, enge Toleranz - Inch-Reihe
12/22/2022 - PDF - German - NBN
Learn More€89.00 -
NBN EN 6081:2022
Luft- und Raumfahrt - Vollniet, Universalkopf, enge Toleranz - Inch-Reihe
12/22/2022 - PDF - German - NBN
Learn More€89.00 -
NBN EN 6069:2022
Luft- und Raumfahrt - Vollniet, 100° reduzierter Senkkopf, enge Toleranz - Inch-Reihe
12/22/2022 - PDF - German - NBN
Learn More€89.00 -
NBN EN 6080:2022
Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series
12/22/2022 - PDF - English - NBN
Learn More€89.00 -
NBN EN 6069:2022
Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series
12/22/2022 - PDF - English - NBN
Learn More€89.00 -
NBN EN 6101:2022
Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series
12/22/2022 - PDF - English - NBN
Learn More€89.00 -
NBN EN 6081:2022
Aerospace series - Rivet, universal head, close tolerance - Inch series
12/22/2022 - PDF - English - NBN
Learn More€89.00 -
€100.00
-
SAE AS 9399C:2022-12-07
BOLT, TEE HEAD - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .3125-24 UNJF-3A
12/7/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 100026C:2022-12-07
SAFETY WIRE - CRES AS5685 (UNS S30500) (Stabilized: Dec 2022)
12/7/2022 - PDF - English - SAE
Learn More€39.00 -
DIN EN 4853:2022-12
Aerospace series - Externally threaded fastener, 100° countersunk normal head, Spiral Drive Recess - Classification: 1 100 MPa (at ambient temperature)/425 °C, German and English version EN 4853:2022
12/1/2022 - PDF - English, German - DIN
Learn More€79.72 -
NF EN 3762, L11-026 (12/2022)
Série aérospatiale - Alliage résistant à chaud X6NiCrTiMnMoV26-15 (1.4944) - Adouci et écroui - Fils pour éléments de fixation forgés - D inférieur ou égal à 15 mm - 1 100 MPa inférieur ou égal à Rm inférieur ou égal à 1 300 MPa
12/1/2022 - Paper - French - AFNOR
Learn More€48.00 -
DIN EN 4844:2022-12
Aerospace series - Screws, 100° countersunk normal head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425 °C, German and English version EN 4844:2022
12/1/2022 - PDF - English, German - DIN
Learn More€59.63 -
DIN EN 4845:2022-12
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated - Classification: 900 MPa (at ambient temperature)/650 °C, German and English version EN 4845:2022
12/1/2022 - PDF - English, German - DIN
Learn More€59.63 -
DIN EN 4846:2022-12
Aerospace series - Screws, pan head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425 °C, German and English version EN 4846:2022
12/1/2022 - PDF - English, German - DIN
Learn More€59.63 -
DIN EN 4847:2022-12
Aerospace series - Screw, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C, German and English version EN 4847:2022
12/1/2022 - PDF - English, German - DIN
Learn More€65.89 -
DIN EN 4848:2022-12
Aerospace series - Screw, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C, German and English version EN 4848:2022
12/1/2022 - PDF - English, German - DIN
Learn More€65.89 -
DIN EN 4849:2022-12
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature)/425 °C, German and English version EN 4849:2022
12/1/2022 - PDF - English, German - DIN
Learn More€65.89 -
DIN EN 4850:2022-12
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C, German and English version EN 4850:2022
12/1/2022 - PDF - English, German - DIN
Learn More€72.80 -
DIN EN 4851:2022-12
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C, German and English version EN 4851:2022
12/1/2022 - PDF - English, German - DIN
Learn More€65.89 -
NF EN 3434, L24-528 (12/2022)
Série aérospatiale - Écrous hexagonaux à créneaux, à freinage interne, en acier, cadmiés, lubrifiés au MoS2 - Classification : 900 MPa (à température ambiante)/235 °C
12/1/2022 - Paper - French - AFNOR
Learn More€48.00 -
NF EN 6069, L21-419 (12/2022)
Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series
12/1/2022 - Paper - French - AFNOR
Learn More€60.67 -
NF EN 6080, L21-045 (12/2022)
Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series
12/1/2022 - Paper - French - AFNOR
Learn More€60.67 -
NF EN 6081, L21-046 (12/2022)
Aerospace series - Rivet, universal head, close tolerance - Inch series
12/1/2022 - Paper - French - AFNOR
Learn More€60.67 -
NF EN 6101, L21-111 (12/2022)
Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series
12/1/2022 - Paper - French - AFNOR
Learn More€60.67 -
DIN EN 2287:2022-12
Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads, German and English version EN 2287:2022
12/1/2022 - PDF - English, German - DIN
Learn More€59.63 -
SAE AS 5929C:2022-11-02
BEARING, ROLLER, NEEDLE, TRACK-ROLLER, CROWN RADIUSED OD, INTEGRAL STUD, TYPE VII, ANTI-FRICTION, CORROSION RESISTANT NITROGEN (CREN) STEEL AND CORROSION RESISTANT (CRES) STEEL, INCH
11/2/2022 - PDF - English - SAE
Learn More€66.00 -
SAE AIR 4923B:2022-11-02
Bolts and Screws, Aerospace Engine - Materials, Procurement Specifications, and Properties
11/2/2022 - PDF - English - SAE
Learn More€86.00 -
SAE AS 9585D:2022-11-02
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A
11/2/2022 - PDF - English - SAE
Learn More€47.00 -
BS EN 6052:2022
Aerospace series. Rivet-collar-system, aluminium alloy, shear type, inch series. Technical Specification
11/1/2022 - PDF - English - BSI
Learn More€250.00 -
BS EN 2287:2022
Aerospace series. Bush, plain, in corrosion resisting steel with self-lubricating liner. Dimensions and loads
10/31/2022 - PDF - English - BSI
Learn More€151.00 -
NBN EN 6052:2022
Série aérospatiale - Système rivet-collier, alliage d'aluminium, type cisaillement, série en inches - Spécification technique
10/28/2022 - PDF - French - NBN
Learn More€121.00 -
NBN EN 6052:2022
Luft- und Raumfahrt - Passniet-Schließring-System aus Aluminiumlegierung für Scherbeanspruchung, Zöllige Reihe - Technische Lieferbedingungen
10/28/2022 - PDF - German - NBN
Learn More€121.00 -
NBN EN 6052:2022
Aerospace series - Rivet-collar-system, aluminium alloy, shear type, inch series - Technical Specification
10/28/2022 - PDF - English - NBN
Learn More€121.00 -
SAE AS 9397C:2022-10-26
BOLT, TEE HEAD - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .1900-32 UNJF-3A
10/26/2022 - PDF - English - SAE
Learn More€39.00 -
SAE AS 9398D:2022-10-26
BOLT, TEE HEAD, CHAMFERED - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A
10/26/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9574D:2022-10-26
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A
10/26/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9360D:2022-10-26
NUT, PLAIN, HEXAGON - DRILLED, SILVER PLATED - UNS S66286, 130 KSI MIN
10/26/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 60100-5:2022-10-26
AS60100-199 BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, .190-32 UNJF-3A
10/26/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 60100AR-5:2022-10-26
AS60100-199AR Amendment Record for Aerospace Standard No. AS60100-199
10/26/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 60200-4:2022-10-26
AS60200-299 BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, .250-28 UNJF-3A
10/26/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 60200AR-4:2022-10-26
AS60200-299AR Amendment Record for Aerospace Standard No. AS60200-299
10/26/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 60300-4:2022-10-26
AS60300-399 BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, .3125-24 UNJF-3A
10/26/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 60300AR-4:2022-10-26
AS60300-399AR Amendment Record for Aerospace Standard No. AS60300-399
10/26/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 60400-4:2022-10-26
AS60400-499 BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, .375-24 UNJF-3A
10/26/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 60400AR-4:2022-10-26
AS60400-499AR Amendment Record for Aerospace Standard No. AS60400-499
10/26/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 60500-4:2022-10-26
AS60500-599 BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, .4375-20 UNJF-3A
10/26/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 60500AR-4:2022-10-26
AS60500-599AR Amendment Record for Aerospace Standard No. AS60500-599
10/26/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 60600-4:2022-10-26
AS60600-699 BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, .500-20 UNJF-3A
10/26/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 60600AR-4:2022-10-26
AS60600-699AR Amendment Record for Aerospace Standard No. AS60600-699
10/26/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 9583D:2022-10-13
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A
10/13/2022 - PDF - English - SAE
Learn More€39.00 -
BS EN 2287:2022 + Redline
Tracked Changes. Aerospace series. Bush, plain, in corrosion resisting steel with self-lubricating liner. Dimensions and loads
10/13/2022 - PDF - English - BSI
Learn More€197.00 -
€47.00
-
SAE AS 9392A:2022-10-13
CUSHION, LOOP CLAMP, MULTIPLE, 3-TUBE, AMS3303 (Stabilized: Oct 2022)
10/13/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9393A:2022-10-13
CUSHION, LOOP CLAMP, MULTIPLE, 2-TUBE, AMS3303 (Stabilized: Oct 2022)
10/13/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 9395A:2022-10-13
BACKPLATE, RETRAINING STRAP, AMS5510 (Stabilized: Oct 2022)
10/13/2022 - PDF - English - SAE
Learn More€54.00 -
UNE-CEN/TR 17603-32-23:2022
Space engineering - Threaded fasteners handbook (Endorsed by Asociación Española de Normalización in August of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€206.00 -
UNE-EN 3434:2022
Aerospace series - Nuts, hexagon, slotted/castellated, self-locking, in steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€38.00 -
UNE-EN 6052:2022
Aerospace series - Rivet-collar-system, aluminium alloy, shear type, inch series - Technical Specification (Endorsed by Asociación Española de Normalización in December of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€68.00 -
UNE-EN 6069:2022
Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN 6080:2022
Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN 6081:2022
Aerospace series - Rivet, universal head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN 6101:2022
Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€62.00 -
UNE-CEN/TR 17603-32-21:2022
Space engineering - Adhesive bonding handbook (Endorsed by Asociación Española de Normalización in August of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€420.00 -
UNE-CEN/TR 17603-32-22:2022
Space engineering - Insert design handbook (Endorsed by Asociación Española de Normalización in August of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€420.00 -
UNE-CEN/TR 17603-32-25:2022
Space engineering - Mechanical shock design and verification handbook (Endorsed by Asociación Española de Normalización in August of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€387.00 -
UNE-EN 2287:2022
Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€46.00 -
SAE AS 27465-6:2022-10-10
AS27465-499 UNION, TUBE, DOUBLE-ENDED, UNIFIED THREADS, CORROSION RESISTANT STEEL, UNPLATED
10/10/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 27465AR-6:2022-10-10
AS27465AR Amendment Record for Aerospace Standard AS27465-499
10/10/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 3479H:2022-10-07
NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F
10/7/2022 - PDF - English - SAE
Learn More€47.00 -
NF EN 6052, L21-047 (10/2022)
Série aérospatiale - Système rivet-collier, alliage d'aluminium, type cisaillement, série en inches - Spécification technique
10/1/2022 - Paper - French - AFNOR
Learn More€75.67 -
NAS 9313:2022
Rivet, Solid, Close Tolerance, 100 Degrees Flush Head, Aluminum Alloy, Titanium-Columbium Alloy
9/30/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 14200:2022
NUT, FLOATING, SELF-LOCKING, ATTACHED RETENTION ELEMENT (A.R.E.), 450 °F, STEEL, 125 KSI Ftu, REPLACEABLE NUT ELEMENT
9/30/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 51850:2022
Screw, Tapping-Thread Forming, Type Ab, Hexagon Head, Slotted
9/30/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
€56.00
-
SAE AS 3239F:2022-09-14
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A
9/14/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9316C:2022-09-14
SCREW, MACHINE - HEXAGON HEAD, SLOTTED, FULL SHANK, ALLOY STEEL, UNS K14675, 135 KSI MIN, .1900-32 UNS-3A
9/14/2022 - PDF - English - SAE
Learn More€47.00 -
€47.00
-
BS SP 31 & 32:2021 + Redline
Tracked Changes. Pins, taper, split (inch series), corrosion resisting steel and cadmium plated alloy steel. Specification
9/13/2022 - PDF - English - BSI
Learn More€197.00 -
SAE AS 3244D:2022-09-08
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN UTS, .2500-28 UNJF-3A
9/8/2022 - PDF - English - SAE
Learn More€47.00 -
NBN EN 2287:2022
Série aérospatiale - Bague cylindrique en acier résistant à la corrosion à garniture autolubrifiante - Dimensions et charges
9/8/2022 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2287:2022
Luft- und Raumfahrt - Buchse ohne Flansch aus korrosionbeständigem Stahl mit selbstschmierender Beschichtung - Maße und Belastungen
9/8/2022 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2287:2022
Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads
9/8/2022 - PDF - English - NBN
Learn More€58.00 -
NF EN 2287, L31-604 (09/2022)
Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads
9/1/2022 - Paper - French - AFNOR
Learn More€48.00 -
€56.00
-
NAS 1645:2022
Insert Arrangements Electrical Connector, Shell Size 12
8/31/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
€56.00
-
NAS 356:2022
Tube Assembly, Control, Aluminum Alloy, with Riveted Clevis and Threaded Rod Ends
8/31/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
€56.00
-
€60.00
-
€56.00
-
NAS 897:2022
Reamers, Chucking, Right-Hand Cut, 0.0938 Through 1.5000 Inch
8/31/2022 - PDF sécurisé - English - NAS
Learn More€60.00 -
NASM 27984:2022
Fasteners, Snap, Style 5 (Scalloped Button Head Type)
8/31/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 35274:2022
Screw, Machine-Drilled Fillister Head, Slotted, Brass, Black Chemical Finish, UNF-2A
8/31/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 35751:2022
Bolt, Square Neck, Round Head (Carriage). Steel, Cadmium or Zinc Plated, Unc-2A
8/31/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
NASM 51959:2022
Screw, machine, flat countersunk head, 82 degrees, cruciform recess, corrosion-resistant steel, UNC-2A
8/31/2022 - PDF sécurisé - English - NAS
Learn More€56.00 -
SAE AS 3238E:2022-08-26
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A
8/26/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9201D:2022-08-26
NUT, PLAIN, HEXAGON, BOSS CONNECTION, SILVER PLATED, 347 CRES UNS S34700 (Stabilized: Aug 2022)
8/26/2022 - PDF - English - SAE
Learn More€60.00 -
SAE AS 125251C:2022-08-26
RIVET - 100 DEGREE COUNTERSUNK HEAD, ALUMINUM ALLOY (UNS A92117)
8/26/2022 - PDF - English - SAE
Learn More€39.00 -
€39.00
-
SAE ARP 573E:2022-08-26
Silver, Copper, and Nickel Alloy Brazed Joints for Aerospace Propulsion Systems (Stabilized: Aug 2022)
8/26/2022 - PDF - English - SAE
Learn More€79.00 -
€449.00 -
SAE AS 3236E:2022-08-19
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A
8/19/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3240E:2022-08-19
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A
8/19/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3415C:2022-08-19
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT)
8/19/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3416C:2022-08-19
BOLT, MACHINE - HEXAGON HEAD, PD SHANK UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A (STRESS RUPTURE RESISTANT)
8/19/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3417C:2022-08-19
BOLT, MACHINE, DOUBLE HEX, EXTENDED WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A (STRESS RUPTURE RESISTANT)
8/19/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3419D:2022-08-19
BOLT, MACHINE, DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT)
8/19/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3420C:2022-08-19
BOLT, MACHINE, DOUBLE HEX, EXTENDED WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN .3750-24 UNJF-3A (STRESS RUPTURE RESISTANT)
8/19/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 91101D:2022-08-19
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A
8/19/2022 - PDF - English - SAE
Learn More€39.00 -
€449.00 -
€449.00 -
SAE AS 9686C:2022-08-05
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A
8/5/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9687C:2022-08-05
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A
8/5/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9890C:2022-08-05
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CRES UNS S41800, .5000-20 UNJF
8/5/2022 - PDF - English - SAE
Learn More€47.00
