49.025 : Materials for aerospace construction 49 : Aircraft and space vehicle engineering ICS, Published by: DIN

DIN EN 3526:2024-04

Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 0,5 mm a 6 mm - 980 MPa R<(Index)m> 1180 MPa, German and English version EN 3526:2023
4/1/2024 - PDF - English, German -
Learn More

€59.63

DIN EN 3524:2024-04

Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 2 mm a 6 mm - 1080 MPa R<(Index)m> 1280 MPa, German and English version EN 3524:2023
4/1/2024 - PDF - English, German -
Learn More

€59.63

DIN EN 3311:2024-04

Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bars for machining - D 300 mm - 900 MPa R<(Index)m> 1160 MPa, German and English version EN 3311:2023
4/1/2024 - PDF - English, German -
Learn More

€59.63

DIN EN 3525:2024-04

Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Plates - 6 mm a 20 mm - 1080 MPa R<(Index)m> 1280 MPa, German and English version EN 3525:2023
4/1/2024 - PDF - English, German -
Learn More

€59.63

DIN EN 4258:2024-03

Aerospace series - Metallic materials - General organization of standardization - Link between types of European Standards and their use, German version ASD-STAN prEN 4258:2023
3/1/2024 - PDF - German -
Learn More

€72.80

DIN EN 4800-002:2024-03

Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section, English version prEN 4800-002:2023
3/1/2024 - PDF - English -
Learn More

€92.62

DIN EN 4908:2024-03

Aerospace series - Hexavalent chromium free chemical conversion process of magnesium and magnesium alloys, German version ASD-STAN prEN 4908:2023
3/1/2024 - PDF - German -
Learn More

€79.72

DIN EN 6042:2024-03

Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy, German and English version EN 6042:2023
3/1/2024 - PDF - English, German -
Learn More

€99.35

DIN EN 4800-004:2024-03

Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire, English version prEN 4800-004:2023
3/1/2024 - PDF - English -
Learn More

€99.35

DIN EN 2955:2024-03

Aerospace series - Recycling of titanium and titanium alloy scrap, English version prEN 2955:2024
3/1/2024 - PDF - English -
Learn More

€65.89

DIN EN 4800-003:2024-03

Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube, English version prEN 4800-003:2023
3/1/2024 - PDF - English -
Learn More

€92.62

DIN EN 4800-001:2024-03

Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip, English version prEN 4800-001:2023
3/1/2024 - PDF - English -
Learn More

€92.62

DIN EN 4800-005:2024-03

Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock, English version prEN 4800-005:2023
3/1/2024 - PDF - English -
Learn More

€99.35

DIN EN 4800-007:2024-03

Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock, English version prEN 4800-007:2023
3/1/2024 - PDF - English -
Learn More

€85.79

DIN EN 4881:2024-02

Aerospace series - Micro-arc oxidation of aluminium and aluminium alloys, German and English version EN 4881:2023
2/1/2024 - PDF - English, German -
Learn More

€92.62

DIN EN 4500-005:2024-01

Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels, German version ASD-STAN prEN 4500-005:2023
1/1/2024 - PDF - German -
Learn More

€92.62

DIN EN 4500-004:2024-01

Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 004: Specific rules for titanium and titanium alloys, German version ASD-STAN prEN 4500-004:2023
1/1/2024 - PDF - German -
Learn More

€85.79

DIN EN 2467:2024-01

Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened - Plates, sheets and strips - 0,4 mm a 20 mm - 520 MPa R<(Index)m> 670 MPa, German version ASD-STAN prEN 2467:2023
1/1/2024 - PDF - German -
Learn More

€52.90

DIN EN 4500-001:2024-01

Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules, German version ASD-STAN prEN 4500-001:2023
1/1/2024 - PDF - German -
Learn More

€92.62

DIN EN 2821:2024-01

Aerospace series - Steel X5CrNiCu15 5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D 200 mm - R<(Index)m> 1310 MPa, German version ASD-STAN prEN 2821:2023
1/1/2024 - PDF - German -
Learn More

€52.90

DIN EN 3361:2024-01

Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets and strips - a 6 mm - 1070 MPa R<(Index)m> 1220 MPa, German version ASD-STAN prEN 3361:2023
1/1/2024 - PDF - German -
Learn More

€52.90

DIN EN 4500-002:2024-01

Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 002: Specific rules for aluminium, aluminium alloys and magnesium alloys, German version ASD-STAN prEN 4500-002:2023
1/1/2024 - PDF - German -
Learn More

€85.79

DIN EN 3488:2024-01

Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Sheets and strips - a 6 mm - 500 MPa R<(Index)m> 700 MPa, German version ASD-STAN prEN 3488:2023
1/1/2024 - PDF - German -
Learn More

€52.90

DIN EN 4500-003:2024-01

Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys, German version ASD-STAN prEN 4500-003:2023
1/1/2024 - PDF - German -
Learn More

€92.62

DIN EN 3487:2024-01

Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Bars for machining - a or D 250 mm - 500 MPa R<(Index)m> 700 MPa, German version ASD-STAN prEN 3487:2023
1/1/2024 - PDF - German -
Learn More

€52.90

DIN EN 4842:2023-12

Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bars for machining - a or D 250 mm - 1070 MPa R<(Index)m> 1200 MPa - Premium quality (pq), German and English version EN 4842:2023
12/1/2023 - PDF - English, German -
Learn More

€59.63

DIN EN 2302:2023-11

Aerospace series - Heat-resisting nickel base alloy NiCr20Co3Fe3 - R<(Index)m> 650 MPa - Sheets and strips, cold rolled - 0,25 mm < a 3 mm, German and English version EN 2302:2023
11/1/2023 - PDF - English, German -
Learn More

€59.63

DIN EN 3628:2023-11

Aerospace series - Lockwire, drawn - Corrosion resisting steel, German and English version EN 3628:2023
11/1/2023 - PDF - English, German -
Learn More

€52.90

DIN EN 2087:2023-08

Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm, English version prEN 2087:2023
8/1/2023 - PDF - English -
Learn More

€52.90

DIN EN 4890/A1:2023-08

Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered - Sheets and plates - 0,3 mm a 50 mm - 900 MPa R<(Index)m> 1050 MPa, German and English version EN 4890:2022/prA1:2023
8/1/2023 - PDF - English, German -
Learn More

€32.34

DIN EN 2559/A1:2023-08

Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area, German and English version EN 2559:2022/prA1:2023
8/1/2023 - PDF - English, German -
Learn More

€32.34

DIN EN 4628:2023-07

Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - D<(Index)e> 200 mm - 1 150 MPa R<(Index)m> 1 300 MPa, German and English version EN 4628:2022
7/1/2023 - PDF - English, German -
Learn More

€59.63

DIN EN 2559:2023-07

Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area, German and English version EN 2559:2022
7/1/2023 - PDF - English, German -
Learn More

€72.80

DIN EN 4627:2023-07

Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - D<(Index)e> 200 mm - 1 150 MPa R<(Index)m> 1 300 MPa, German and English version EN 4627:2022
7/1/2023 - PDF - English, German -
Learn More

€59.63

DIN EN 3879:2023-06

Aerospace series - Metallic materials - Filler metal for welding - Technical specification, German and English version EN 3879:2023
6/1/2023 - PDF - English, German -
Learn More

€85.79

DIN EN 2003-002:2023-06

Aerospace series - Steels - Test methods - Part 002: Izod impact test, German and English version EN 2003-002:2023
6/1/2023 - PDF - English, German -
Learn More

€72.80

DIN EN ISO/ASTM 52943-2:2023-05

Additive manufacturing for aerospace - Process characteristics and performance - Part 2: Directed energy deposition using wire and arc (ISO/ASTM DIS 52943-2:2023), German and English version prEN ISO/ASTM 52943-2:2023
5/1/2023 - PDF - English, German -
Learn More

€85.79

DIN EN 2573:2023-04

Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Wires - 0,25 mm D<(Index)e> 3 mm - R<(Index)m> 780 MPa, German and English version EN 2573:2022
4/1/2023 - PDF - English, German -
Learn More

€59.63

DIN EN 3675:2023-03

Aerospace series - Sampling plan for acceptance testing of aramid, carbon fibre and textile glass filament yarns, German and English version EN 3675:2022
3/1/2023 - PDF - English, German -
Learn More

€65.89

DIN EN 3762:2023-03

Aerospace series - Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944) - Softened and cold worked - Wire for forged fasteners - D 15 mm - 1 100 MPa R<(Index)m> 1 300 MPa, German and English version EN 3762:2022
3/1/2023 - PDF - English, German -
Learn More

€59.63

DIN EN 3656:2023-03

Aerospace series - Polycarbonate, self-extinguishing, low smoke emission - Characteristics, German and English version EN 3656:2022
3/1/2023 - PDF - English, German -
Learn More

€52.90

DIN EN 4882:2023-03

Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a 6 mm - R<(Index)m> 1 070 MPa, German and English version EN 4882:2022
3/1/2023 - PDF - English, German -
Learn More

€59.63

DIN EN 4904:2023-03

Aerospace series - Steel 36NiCrMo16 (1.6773) - 1 000 MPa R<(Index)m> 1 200 MPa - Bars - 100 mm D 250 mm, German and English version EN 4904:2022
3/1/2023 - PDF - English, German -
Learn More

€59.63

DIN EN 3479:2023-03

Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Plates - 6 mm < a 20 mm - 1 070 MPa R<(Index)m> 1 220 MPa, German and English version EN 3479:2022
3/1/2023 - PDF - English, German -
Learn More

€59.63

DIN EN 4884:2023-03

Aerospace series - Steel X3CrNiMoAl (1.4534) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D 200 mm - 1 200 MPa R<(Index)>m 1 350 MPa, German and English version EN 4884:2022
3/1/2023 - PDF - English, German -
Learn More

€59.63

DIN EN 4374:2023-03

Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution treated and precipitation treated - Bars and sections - D<(Index)e> 200 mm, German and English version EN 4374:2022
3/1/2023 - PDF - English, German -
Learn More

€59.63

DIN EN 3557:2023-03

Aerospace series - Aluminium alloy AL-P6061-T4 - Drawn tube for pressure applications - 0,6 mm a 3 mm, German and English version EN 3557:2022
3/1/2023 - PDF - English, German -
Learn More

€59.63

DIN EN 4883:2023-03

Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Plates - 6 mm a 100 mm - R<(Index)m> 1 070 MPa, German and English version EN 4883:2022
3/1/2023 - PDF - English, German -
Learn More

€59.63

DIN EN 3364:2023-03

Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted, softened - Forging stocks - a or D 300 mm, German and English version EN 3364:2022
3/1/2023 - PDF - English, German -
Learn More

€59.63

LN 9108:2022-12

Aerospace series - Elastomers, sheet, panels - Dimensions, masses, Text in German and English
12/1/2022 - PDF - English, German -
Learn More

€146.17

DIN EN 4259:2022-10

Aerospace series - Metallic materials - Definition of general terms, Trilingual version EN 4259:2022
10/1/2022 - PDF - English, French, German -
Learn More

€85.79

DIN EN 4566:2022-08

Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15Ni) -Vacuum melted - Solution treated - Forgings - D<(Index)e> 100 mm, German and English version EN 4566:2022
8/1/2022 - PDF - English, German -
Learn More

€59.63

DIN EN 16602-70-80:2022-08

Space product assurance - Processing and quality assurance requirements for metallic powder bed fusion technologies for space applications, English version EN 16602-70-80:2021
8/1/2022 - PDF - English, German -
Learn More

€169.25

DIN EN 4900:2022-08

Aerospace series - Aluminium alloy 5086 - H111 - Extruded bars - 10 mm D 300 mm, German and English version EN 4900:2022
8/1/2022 - PDF - English, German -
Learn More

€59.63

DIN EN 4890:2022-08

Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered - Sheets and plates - 0,3 mm a 50 mm - 900 MPa R<(Index)m> 1050 MPa, German and English version EN 4890:2022
8/1/2022 - PDF - English, German -
Learn More

€59.63

DIN EN 3792:2022-08

Aerospace series - Anaerobic polymerisable compounds - Technical specification, German and English version EN 3792:2022
8/1/2022 - PDF - English, German -
Learn More

€79.72

DIN EN 4260:2022-07

Aerospace series - Metallic materials - Rules for drafting and presentation of technical specifications, German and English version EN 4260:2022
7/1/2022 - PDF - English, German -
Learn More

€85.79

DIN EN 4387:2022-07

Aerospace series - Non-metallic materials - Rules for drafting and presentation of technical specifications, German and English version EN 4387:2022
7/1/2022 - PDF - English, German -
Learn More

€92.62

DIN EN 4261:2022-07

Aerospace series - Metallic materials - Rules for drafting and presentation of test method standards, German and English version EN 4261:2022
7/1/2022 - PDF - English, German -
Learn More

€79.72

DIN EN 4866:2022-07

Aerospace series - Definitions of imperfections and defects in organic matrix composite materials, German and English version EN 4866:2021
7/1/2022 - PDF - English, German -
Learn More

€141.96

DIN EN 4385:2022-07

Aerospace series - Non-metallic materials - General organization of standardization - Links between types of standards, German and English version EN 4385:2022
7/1/2022 - PDF - English, German -
Learn More

€59.63

DIN EN 4717:2022-06

Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification, German and English version EN 4717:2022
6/1/2022 - PDF - English, German -
Learn More

€59.63

DIN EN 4718:2022-06

Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification, German and English version EN 4718:2022
6/1/2022 - PDF - English, German -
Learn More

€52.90

DIN EN 4700-002:2022-04

Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bars and sections, German and English version EN 4700-002:2021
4/1/2022 - PDF - English, German -
Learn More

€115.33

DIN EN 3480:2022-03

Aerospace series - Steel X6CrNiTi18 10 (1.4541) - Air melted - Softened - Plates - 6 mm < a 50 mm - 500 MPa R<(Index)m> 700 MPa, German version ASD-STAN prEN 3480:2021
3/1/2022 - PDF - German -
Learn More

€52.90

DIN EN 4500-006:2022-02

Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 006: Specific rules for filler metals for brazing, German and English version prEN 4500-006:2021
2/1/2022 - PDF - English, German -
Learn More

€79.72

DIN EN 16602-70-16:2022-02

Space engineering - Adhesive bonding for spacecraft and launcher applications, English version EN 16602-70-16:2021
2/1/2022 - PDF - English, German -
Learn More

€201.96

DIN EN 4877-001:2022-02

Aerospace series - Filler metals for welding - Part 001: Technical specification, German and English version prEN 4877-001:2021
2/1/2022 - PDF - English, German -
Learn More

€92.62

DIN EN 4287:2021-11

Aerospace series - Aluminium alloy AL-P7010 - Forging stock, English version prEN 4287:2021
11/1/2021 - PDF - English -
Learn More

€52.90

DIN EN 4825:2021-09

Aerospace series - Steel X12CrNiMoV12-3 (1.4938) - Air melted and consumable electrode remelted - Hardened and tempered - Bars - D<(Index)e> 150 mm - 900 MPa R<(Index)m> 1 100 MPa, German and English version EN 4825:2021
9/1/2021 - PDF - English, German -
Learn More

€59.63

DIN EN 6025:2021-08

Aerospace series - Plates - Aluminium alloy 2024 - Close tolerances flatness - Thickness - 6 mm < a 55 mm - Dimensions, German and English version EN 6025:2021
8/1/2021 - PDF - English, German -
Learn More

€59.63

DIN EN 4630:2021-07

Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - D<(Index)e> 200 mm - 900 MPa R<(Index)m> 1050 MPa, German and English version prEN 4630:2021
7/1/2021 - PDF - English, German -
Learn More

€52.90

DIN EN 4631:2021-07

Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - D<(Index)e> 200 mm - 900 MPa R<(Index)m> 1050 MPa, German and English version prEN 4631:2021
7/1/2021 - PDF - English, German -
Learn More

€52.90

DIN EN 3639:2021-06

Aerospace series - Heat resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold worked - Wires for forged fasteners - D 15 mm - 900 MPa R<(Index)m> 1 100 MPa, German and English version EN 3639:2021
6/1/2021 - PDF - English, German -
Learn More

€59.63

DIN EN 4864:2021-04

Aerospace series - Environmental testing - High dynamic abrasion, mar, scratch and punch test in cabin interior, German and English version EN 4864:2020
4/1/2021 - PDF - English, German -
Learn More

€72.80

DIN EN 2213:2021-03

Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Bars - D<(Index)e> 16 mm - 980 MPa R<(Index)m> 1180 MPa, German and English version prEN 2213:2021
3/1/2021 - PDF - English, German -
Learn More

€52.90

DIN EN 2252:2021-03

Aerospace series - Steel 15CrMoV6 (1.7334) - Forgings - Bars - D<(Index)e> 100 mm - 1080 MPa R<(Index)m> 1250 MPa, German and English version prEN 2252:2021
3/1/2021 - PDF - English, German -
Learn More

€52.90

DIN EN 2960:2021-03

Aerospace series - Heat resisting nickel base alloy (NI-P101HT) - Cold worked and solution treated - Bars for machining for fasteners - 3 mm D 50 mm, German and English version EN 2960:2020
3/1/2021 - PDF - English, German -
Learn More

€52.90

DIN EN 3523:2021-03

Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Bar for machining - D<(Index)e> 100 mm - 1080 MPa R<(Index)m> 1280 MPa, German and English version prEN 3523:2021
3/1/2021 - PDF - English, German -
Learn More

€52.90

DIN EN 4861:2021-03

Aerospace series - Metrological assessment procedure for kinematic fields measured by digital image correlation, German and English version EN 4861:2020
3/1/2021 - PDF - English, German -
Learn More

€120.84

WL 3.2384-3:2021-01

Aerospace series - Cast aluminium alloy with approx. 7 Si - 0,6 Mg - Part 3: Investment casting, Text in German and English
1/1/2021 - PDF - English, German -
Learn More

€0.00

DIN EN 4827:2021-01

Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys, German and English version prEN 4827:2020
1/1/2021 - PDF - English, German -
Learn More

€110.00

DIN 65271:2020-11

Aerospace series - Elastomeric semi-finished products and parts - Technical specification, Text in German and English
11/1/2020 - PDF - English, German -
Learn More

€92.62

DIN 65083:2020-11

Aerospace series - Heat treatment of castings of titanium and titanium alloys
11/1/2020 - PDF - German -
Learn More

€39.35

DIN EN 6111:2020-11

Aerospace series - Ethylene-propylene elastomer (EPM/EPDM) - Hardness 80 IRHD for static seal elements in hydraulic systems for long-term application - Material standard, German and English version EN 6111:2020
11/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 4400-3:2020-10

Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section, German and English version EN 4400-3:2019
10/1/2020 - PDF - English, German -
Learn More

€120.84

DIN EN 4400-1:2020-10

Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 1: Aluminium and aluminium alloy plate, German and English version EN 4400-1:2019
10/1/2020 - PDF - English, German -
Learn More

€126.26

DIN EN 4400-6:2020-10

Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 6: Aluminium alloy forging stock, German and English version EN 4400-6:2019
10/1/2020 - PDF - English, German -
Learn More

€85.79

DIN 17024-2:2020-10

Additive manufacturing - Process characteristics and performance - Part 2: Directed energy deposition using wire and arc in aerospace applications
10/1/2020 - PDF - German -
Learn More

€59.63

DIN EN 4400-2:2020-10

Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 2: Aluminium and aluminium alloy sheet and strip, German and English version EN 4400-2:2019
10/1/2020 - PDF - English, German -
Learn More

€126.26

DIN EN 2002-21:2020-09

Aerospace series - Metallic materials - Test methods - Part 21: Radiographic testing of castings, German and English version EN 2002-21:2019
9/1/2020 - PDF - English, German -
Learn More

€52.90

DIN EN 4860:2020-08

Aerospace series - Environmental testing - Test Xb: Abrasion of markings, letterings, surfaces and materials caused by rubbing fingertips and hands, English version prEN 4860:2020
8/1/2020 - PDF - English -
Learn More

€79.72

DIN EN 4264:2020-05

Aerospace series - Heat resisting alloy X4NiCrMoTi43-13 - As forged - Forging stock - a or D 200 mm, German and English version EN 4264:2020
5/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 4244:2020-05

Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - Hardened and tempered - Bars - a or D 200 mm - 1 000 MPa R<(Index)m> 1 140 MPa, German and English version EN 4244:2020
5/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 4575:2020-05

Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and descaled - Sheets and plates - 3 mm < a 50 mm, German and English version EN 4575:2020
5/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 4573:2020-05

Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Bars and sections - D<(Index)e> 100 mm, German and English version EN 4573:2020
5/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 4245:2020-05

Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - As forged - Forging stock - D<(Index)e> 300 mm, German and English version EN 4245:2020
5/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 4571:2020-05

Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Bars and sections - D<(Index)e> 100 mm, German and English version EN 4571:2020
5/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 4707:2020-05

Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium, German and English version EN 4707:2020
5/1/2020 - PDF - English, German -
Learn More

€72.80

DIN EN 4426:2020-05

Aerospace series - Non-metallic materials - Textiles - Test method - Determination of conductivity and pH of aqueous extracts, German and English version EN 4426:2020
5/1/2020 - PDF - English, German -
Learn More

€52.90

DIN EN 4570:2020-05

Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Forgings - D<(Index)e> 100 mm, German and English version EN 4570:2020
5/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 4574:2020-05

Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Forgings - D<(Index)e> 100 mm, German and English version EN 4574:2020
5/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 4572:2020-05

Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Sheets and strips - a 3 mm, German and English version EN 4572:2020
5/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 3219:2020-04

Aerospace series - Heat resisting nickel base alloy (NI-P100HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm D 30 mm, German and English version EN 3219:2020
4/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 3761:2020-03

Aerospace series - Heat resisting alloy FE-PA2601 - Softened and cold worked - Bar for forged fasteners - D 50 mm - 1 100 MPa R<(Index)m> 1 300 MPa, German and English version EN 3761:2020
3/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 3358:2020-03

Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D 150 mm - R<(Index)m> 1 400 MPa, German and English version EN 3358:2020
3/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 3666:2020-03

Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D 50 mm - 1 550 MPa R<(Index)m> 1 830 MPa, German and English version EN 3666:2020
3/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 3484:2020-03

Aerospace series - Steel X5CrNiCuNb16-4 (1.4549 type 1.4542) - As cast - Reference heat treatment: homogenised, solution treated, precipitation hardened and sub zero - Remelting stock, German and English version EN 3484:2019
3/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 2476:2020-02

Aerospace series - Steel 30CrNiMo8 (1.6580) - 1100 MPa R<(Index)m> 1300 MPa - Forgings - D<(Index)e> 100 mm, German and English version EN 2476:2019
2/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 3018:2020-02

Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D 3 mm, German and English version EN 3018:2019
2/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 3486:2020-02

Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Solution annealed and precipitation hardened - 1 400 R<(Index)m> 1 550 MPa - Forgings - D<(Index)e> 100 mm, German and English version EN 3486:2019
2/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 2451:2020-02

Aerospace series - Steel 31Ni10 - 1230 MPa R<(Index)m> 1420 MPa - Forgings - D<(Index)e> 40 mm, German and English version EN 2451:2019
2/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 3482:2020-02

Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Forging stock - D<(Index)e> 100 mm, German and English version EN 3482:2019
2/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 2502:2020-02

Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa R<(Index)m> 1080 MPa - Bars, German and English version EN 2502:2019
2/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 3468:2020-02

Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 MPa R<(Index)m> 700 MPa - Forgings - D<(Index)e> 100 mm, German and English version EN 3468:2019
2/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 3489:2020-02

Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 R<(Index) m> 750 MPa - Tubes for structures - 0,5 a 5 mm, German and English version EN 3489:2019
2/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 2002-16:2020-02

Aerospace series - Metallic materials - Test methods - Part 16: Non-destructive testing - Penetrant testing, German and English version EN 2002-16:2019
2/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 2400:2020-02

Aerospace series - Heat resisting nickel base alloy NI-P96-HT - Cold drawn and precipitation treated - Wire - D 10 mm, German and English version EN 2400:2019
2/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 2503:2020-02

Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa R<(Index)m> 1080 MPa - Forgings - D<(Index)e> 150 mm, German and English version EN 2503:2019
2/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 3481:2020-02

Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Hollow bars - 5 mm a 12 mm, German and English version EN 3481:2019
2/1/2020 - PDF - English, German -
Learn More

€59.63

DIN EN 2816:2019-12

Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 200 mm - R<(Index)m> 965 MPa, German and English version EN 2816:2019
12/1/2019 - PDF - English, German -
Learn More

€59.63

DIN EN 4827:2019-12

Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys, German and English version EN 4827:2019
12/1/2019 - PDF - English, German -
Learn More

€92.62

DIN EN 2667-3:2019-12

Aerospace series - Non-metallic materials - Foaming structural adhesive films - Test methods - Part 3: Expansion ratio and volatile content, German and English version EN 2667-3:2019
12/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2465:2019-12

Aerospace series - Steel X2CrNi18-9 (1.4307) - Softened - 450 MPa R<(Index)m> 680 MPa - Bars for machining - 4 mm D<(Index)e> 100 mm, German and English version EN 2465:2019
12/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2125:2019-12

Aerospace series - Aluminium alloy Al-P16- - T6151 - Plates - 6 mm < a 120 mm, German and English version EN 2125:2019
12/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 3844-3:2019-12

Aerospace series - Flammability of non-metallic materials - Part 3: Small burner test, 45° - Determination of the resistance of material to flame and glow propagation and to flame penetration, German and English version EN 3844-3:2019
12/1/2019 - PDF - English, German -
Learn More

€79.72

DIN EN 2957:2019-12

Aerospace series - Method of preparation of forged samples, German and English version EN 2957:2019
12/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 3844-1:2019-12

Aerospace series - Flammability of non-metallic materials - Part 1: Small burner test, vertical - Determination of the vertical flame propagation, German and English version EN 3844-1:2019
12/1/2019 - PDF - English, German -
Learn More

€79.72

DIN EN 2366:2019-12

Aerospace series - Sheets and strips - Heat resisting alloys - Cold rolled - Thickness a 3 mm - Dimensions, German and English version EN 2366:2019
12/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2450:2019-12

Aerospace series - Steel 31Ni10 - 1 230 MPa R<(Index)m> 1 420 MPa - Bars - D<(Index)e> 40 mm, German and English version EN 2450:2018
12/1/2019 - PDF - English, German -
Learn More

€59.63

DIN EN 2390:2019-12

Aerospace series - Aluminium alloy 6082-T6 - Tubes for structures 0,6 mm a 12,5 mm, German and English version EN 2390:2019
12/1/2019 - PDF - English, German -
Learn More

€59.63

DIN EN 3510:2019-12

Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Bars and sections - De 100 mm, German and English version EN 3510:2019
12/1/2019 - PDF - English, German -
Learn More

€59.63

DIN EN 3844-2:2019-12

Aerospace series - Flammability of non-metallic materials - Part 2: Small burner test, horizontal - Determination of the horizontal flame propagation, German and English version EN 3844-2:2019
12/1/2019 - PDF - English, German -
Learn More

€79.72

DIN EN 4867:2019-11

Aerospace series - Laser surface marking by discoloration, German and English version EN 4867:2019
11/1/2019 - PDF - English, German -
Learn More

€79.72

DIN EN 3357:2019-10

Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D 150 mm - 1 200 MPa R<(Index)m> 1 400 MPa, German and English version EN 3357:2019
10/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2638:2019-09

Aerospace series - Aluminium alloy 2024- - T3 - Extruded bar and section - 1,2 mm (a or D) 150 mm with coarse peripheral grain control, German and English version EN 2638:2019
9/1/2019 - PDF - English, German -
Learn More

€59.63

DIN EN 2564:2019-08

Aerospace series - Carbon fibre laminates - Determination of the fibre, resin and void contents, German and English version EN 2564:2018
8/1/2019 - PDF - English, German -
Learn More

€65.89

DIN EN 2114:2019-08

Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D 10 mm, German and English version EN 2114:2019
8/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2959:2019-08

Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners - 3 mm D 30 mm, German and English version EN 2959:2019
8/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2568:2019-08

Aerospace series - Fluorocarbon rubber (FKM) - Hardness 90 IRHD, German and English version EN 2568:2019
8/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 3460:2019-08

Aerospace series - Titanium TI-P99002 - Annealed - Bar for machining - a or D 150 mm - R<(Index)m> 390 MPa, German and English version EN 3460:2019
8/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2566:2019-08

Aerospace series - Fluorocarbon rubber (FKM) - Hardness 70 IRHD, German and English version EN 2566:2019
8/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2951:2019-08

Aerospace series - Metallic materials - Micrographic determination of content of non-metallic inclusions, German and English version EN 2951:2019
8/1/2019 - PDF - English, German -
Learn More

€65.89

DIN EN 2510:2019-08

Aerospace series - Aluminium alloy 2024- - T42 - Drawn tubes for structural applications, German and English version EN 2510:2019
8/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2798:2019-08

Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD, German and English version EN 2798:2019
8/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2567:2019-08

Aerospace series - Fluorocarbon rubber (FKM) - Hardness 80 IRHD, German and English version EN 2567:2019
8/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 3378:2019-08

Aerospace series - Titanium TI-P99002 - Annealed - Wires for rivets - 1,6 mm D 10 mm, German and English version EN 3378:2019
8/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2475:2019-07

Aerospace series - Steel 30CrNiMo8 (1.6580) - Air melted - Hardened and tempered - Bar for machining - D<(Index)e> 100 mm - 1 100 MPa R<(Index)m> 1 300 MPa, German and English version EN 2475:2018
7/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 3470:2019-07

Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - 1 200 MPa R<(Index)m> 1 400 MPa, German and English version EN 3470:2019
7/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2468:2019-07

Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm a 5 mm, German and English version EN 2468:2019
7/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 3314:2019-07

Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D 75 mm, German and English version EN 3314:2019
7/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2031:2019-07

Aerospace series - Steel 102Cr6 (1.2067) - Hardened and tempered - Bars, German and English version EN 2031:2018
7/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2470:2019-07

Aerospace series - Steel FE-PA11 - Softened and cold drawn - Wires for rivets - 1 mm D 10 mm, German and English version EN 2470:2019
7/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 3220:2019-06

Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm D 30 mm, German and English version EN 3220:2019
6/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2699:2019-06

Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm D 50 mm, German and English version EN 2699:2019
6/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 4289:2019-06

Aerospace series - Aluminium alloy AL-P7175 - Forging stock, German and English version EN 4289:2019
6/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2952:2019-06

Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D 50 mm - 1 270 MPa R<(Index)m> 1 550 MPa, German and English version EN 2952:2019
6/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2321:2019-06

Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a 150 mm, German and English version EN 2321:2019
6/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2320:2019-06

Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a 75 mm, German and English version EN 2320:2019
6/1/2019 - PDF - English, German -
Learn More

€52.90

WL 2.4964-2:2019-05

Aerospace series - High temperature cobalt alloy with approx. 0,1 C - 20 Cr - 15 W - 10 Ni - Part 2: Bar and forging
5/1/2019 - PDF - German -
Learn More

€32.34

WL 3.2374-2:2019-05

Aerospace series - Cast aluminium alloy with approx. 7 Si - 0,3 Mg - Part 2: Investment casting, Text in German and English
5/1/2019 - PDF - English, German -
Learn More

€39.35

WL 3.2384-4:2019-05

Aerospace series - Cast aluminium alloy with approx. 7 Si - 0,6 Mg - Part 4: Special investment casting, Text in German and English
5/1/2019 - PDF - English, German -
Learn More

€39.35

WL 3.7184-100 Berichtigung 1:2019-04

Aerospace - Titanium alloy with approx. 4Al-4Mo-2Sn, Plate, bars and forgings - Part 100: Design and production data, conversion, Corrigendum to WL 3.7184-100:1990-11
4/1/2019 - PDF - German -
Learn More

€0.00

WL 2.4632-2 Berichtigung 1:2019-04

Aerospace - Heat-resisting nickel alloy with approx. 0,1 C - 20 Cr - 18 Co - 2,5 Ti - 1,5 Al, consumable electrode remelted - Part 2: Bars and forgings, Corrigendum to WL 2.4632-2:1993-08
4/1/2019 - PDF - German -
Learn More

€0.00

DIN 29657 Berichtigung 1:2019-03

Aerospace Seamless structural tubes in steel and nickel alloys - Technical specification, Corrigendum 1
3/1/2019 - PDF - German -
Learn More

€0.00

DIN EN 2709:2019-03

Aerospace series - Aluminium alloy 2024- - T3510 - Bars and sections - 1,2 mm (a or D) 150 mm - With peripheral coarse grain control, German and English version EN 2709:2018
3/1/2019 - PDF - English, German -
Learn More

€59.63

DIN EN 2600:2019-03

Aerospace series - Designation of metallic semi-finished products - Rules, German and English version EN 2600:2018
3/1/2019 - PDF - English, German -
Learn More

€99.35

DIN EN 2715:2019-03

Aerospace series - Macrographic examination of aluminium and aluminium alloy wrought products, forging stock and forgings, German and English version EN 2715:2018
3/1/2019 - PDF - English, German -
Learn More

€45.98

DIN EN 2716:2019-02

Aerospace series - Test method - Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys, German and English version EN 2716:2018
2/1/2019 - PDF - English, German -
Learn More

€45.98

DIN EN 2813:2019-02

Aerospace series - Aluminium alloy AL-P-6061- - T6 - Drawn tube for pressure applications - 0,6 mm a 12,5 mm, German and English version EN 2813:2018
2/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2726:2019-02

Aerospace series - Aluminium alloy Al-C42201 - T6 - Sand castings - a 20 mm, German and English version EN 2726:2018
2/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2341:2019-02

Aerospace series - Aluminium and aluminium alloy - Square and rectangular extruded bars - Dimensions, German and English version EN 2341:2018
2/1/2019 - PDF - English, German -
Learn More

€59.63

DIN EN 2728:2019-02

Aerospace series - Aluminium alloy AL-C42101 - T6 - Sand casting - a 20 mm, German and English version EN 2728:2018
2/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 3315:2019-01

Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Forgings - D<(Index)e> 75 mm, German and English version EN 3315:2018
1/1/2019 - PDF - English, German -
Learn More

€52.90

DIN EN 2369:2019-01

Aerospace series - Wires, heat resisting alloys - Diameter 0,2 mm D 8 mm - Dimensions, German and English version EN 2369:2018
1/1/2019 - PDF - English, German -
Learn More

€45.98

DIN EN 2796:2018-11

Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD, German and English version EN 2796:2018
11/1/2018 - PDF - English, German -
Learn More

€45.98

DIN 65124:2018-10

Aerospace series - Technical specifications for additive manufacturing of metallic materials with the powder bed process
10/1/2018 - PDF - German -
Learn More

€65.89

DIN EN 2540:2018-10

Aerospace series - Steel X7CrNiAl17-7 (1.4568) - Air melted - Solution treated and precipitation hardened - Sheet and strip - a 6 mm - 1 240 MPa R<(Index)m> 1 450 MPa, German and English version EN 2540:2018
10/1/2018 - PDF - English, German -
Learn More

€52.90

DIN EN 2541:2018-10

Aerospace series - Steel FE-PA18 - Quenched and cold drawn - Wire for spring - D 4,0 mm, German and English version EN 2541:2018
10/1/2018 - PDF - English, German -
Learn More

€52.90

DIN EN 2280:2018-09

Aerospace series - Steel FE-PM37 - 900 MPa R<(Index)m> 1 100 MPa - Sheet - a 6 mm, German and English version EN 2280:2018
9/1/2018 - PDF - English, German -
Learn More

€52.90

DIN EN 2319:2018-09

Aerospace series - Aluminium alloy 2024- - T3510 - Drawn bar - a 75 mm, German and English version EN 2319:2018
9/1/2018 - PDF - English, German -
Learn More

€52.90

DIN EN 2279:2018-09

Aerospace series - Steel FE-PM37 - 900 MPa R<(Index)m> 1100 MPa - Forgings - D<(Index)e> 150 mm, German and English version EN 2279:2018
9/1/2018 - PDF - English, German -
Learn More

€52.90

DIN EN 2799:2018-09

Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD, German and English version EN 2799:2018
9/1/2018 - PDF - English, German -
Learn More

€45.98

DIN EN 2387:2018-09

Aerospace series - Aluminium alloy 2014A- - T6 - Tubes for structures - 0,6 mm a 12,5 mm, German and English version EN 2387:2018
9/1/2018 - PDF - English, German -
Learn More

€52.90

DIN 65071-3:2018-08

Aerospace series - Fibre reinforced moulding materials - Part 3: Preparation of honeycomb/prepreg sandwich test panels
8/1/2018 - PDF - German -
Learn More

€45.98

DIN EN 2899:2018-07

Aerospace series - Vulcanized rubbers - Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers, German and English version EN 2899:2018
7/1/2018 - PDF - English, German -
Learn More

€59.63

DIN EN 2795:2018-05

Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD, German and English version EN 2795:2018
5/1/2018 - PDF - English, German -
Learn More

€45.98

DIN EN 6041:2018-03

Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC), German and English version EN 6041:2018
3/1/2018 - PDF - English, German -
Learn More

€65.89

DIN EN 6064:2018-03

Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC), German and English version EN 6064:2017
3/1/2018 - PDF - English, German -
Learn More

€59.63

DIN EN 2667-2:2018-03

Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 2: Compressive tube shear, German and English version EN 2667-2:2018
3/1/2018 - PDF - English, German -
Learn More

€65.89

DIN EN 2221:2018-02

Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mm a 55 mm, German and English version EN 2221:2017
2/1/2018 - PDF - English, German -
Learn More

€52.90

DIN EN 2135:2018-02

Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar - D<(Index)e> 40 mm, German and English version EN 2135:2017
2/1/2018 - PDF - English, German -
Learn More

€52.90

DIN EN 2174:2018-02

Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Forgings - D<(Index)e> 100 mm - R<(Index)m> 850 MPa, German and English version EN 2174:2017
2/1/2018 - PDF - English, German -
Learn More

€52.90

DIN EN 2119:2018-02

Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets -2 mm D 10 mm - R<(Index)m> 960 MPa, German and English version EN 2119:2017
2/1/2018 - PDF - English, German -
Learn More

€52.90