49.025.40 : Rubber and plastics
-
SAE AMS 3216J:2023-10-05
Elastomer: Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set / 70 to 80 Type A Hardness For Products in Fuel Systems and Specific Engine Oil Systems
10/5/2023 - PDF - English - SAE
Learn More€83.00 -
SAE AMS 3379A:2023-08-14
Sealing Compound, Polysulfide Rubber Performed Strips for Sealing Removable Doors, Skins, and Panels (Stabilized: Aug 2023)
8/14/2023 - PDF - English - SAE
Learn More€86.00 -
SAE AMS-R-25988B:2023-06-27
Rubber: Fluorosilicone (FVMQ), Engine Oil / Fuel-Resistant, For Seals in Engine Oil Systems/Fuel Systems
6/27/2023 - PDF - English - SAE
Learn More€105.00 -
SAE AMS 3238K:2023-06-19
Butyl (IIR) Rubber Phosphate Ester Resistant 65 - 75 (Stabilized: Jun 2023)
6/19/2023 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3242J:2023-06-02
Chloroprene (CR) Rubber Weather Resistant 75 - 85 (Stabilized: Jun 2023)
6/2/2023 - PDF - English - SAE
Learn More€75.00 -
€79.00
-
€60.00
-
SAE AMS 3699A:2022-12-29
Resin System, Epoxy, Carbon Microballoon Filled, 135 °C (275 °F) Cure
12/29/2022 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3266B:2022-11-02
Sealing Compound, Polythioether Elastomeric Two-Part Electrically Conductive
11/2/2022 - PDF - English - SAE
Learn More€89.00 -
SAE AMS-S-8802F:2022-10-26
Sealing Compound, Fuel-Resistant, Integral Fuel Tanks and Fuel Cell Cavities
10/26/2022 - PDF - English - SAE
Learn More€93.00 -
SAE AMS 3644H:2022-09-30
Plastic: Polyimide for Molded Rod, Bar, and Tube, Plaque, and Formed Parts (Stabilized: Sep 2022)
9/30/2022 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 7287A:2022-09-08
Fluorocarbon Elastomer (FKM) High Temperature/HTS Oil Resistant/Fuel Resistant Low Compression Set/70 to 80 Hardness, Low Temperature Tg -22 °F (-30 °C), for Seals in Oil/Fuel/Specific Hydraulic Systems
9/8/2022 - PDF - English - SAE
Learn More€79.00 -
SAE AMS-P-5315C:2022-08-05
Rubber: Acrylonitrile-Butadiene (NBR) Fuel-Resistant 60 - 70 Type A Hardness
8/5/2022 - PDF - English - SAE
Learn More€86.00 -
SAE AMS 3240L:2022-06-13
Elastomer: Chloroprene Rubber (CR) Weather Resistant 35 - 45
6/13/2022 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3241K:2022-06-13
Elastomer: Chloroprene Rubber (CR) Weather Resistant 55 - 65
6/13/2022 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3281G:2022-06-13
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)
6/13/2022 - PDF - English - SAE
Learn More€98.00 -
SAE AMS 3328D:2022-05-24
Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 35 - 45 Type “A” Durometer Hardness for Products Used in Engine Oil Systems/Fuel Systems
5/24/2022 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 7270M:2022-03-09
Rubber: Acrylonitrile-Butadiene (NBR) Fuel Resistant 65 to 75 Type A Hardness for Seals in Fuel
3/9/2022 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3197N:2022-03-01
Sponge, Chloroprene (CR) Rubber, Soft (Stabilized: Mar 2022)
3/1/2022 - PDF - English - SAE
Learn More€75.00 -
SAE ARP 5256A:2022-02-02
Mixing Resins, Adhesives and Potting Compounds (Stabilized: Feb 2022)
2/2/2022 - PDF - English - SAE
Learn More€96.00 -
SAE AMS 3316A:2021-12-13
Elastomer: Silicone Rubber (MQ/VMQ), Fiberglass Fabric Reinforced 65 to 75 Shore A Hardness
12/13/2021 - PDF - English - SAE
Learn More€75.00 -
SAE AMS-S-83318D:2021-11-23
Sealing Compound, Polysulfide Type, Low Temperature Curing, Quick Repair, Integral Fuel Tanks and Fuel Cell Cavities (Stabilized: Nov 2021)
11/23/2021 - PDF - English - SAE
Learn More€89.00 -
€86.00
-
€47.00
-
SAE AMS 3323B:2021-08-12
Sponge, Fluorosilicone (FVM) Rubber Closed Cell (Stabilized: Aug 2021)
8/12/2021 - PDF - English - SAE
Learn More€70.00 -
€81.00
-
SAE AMS 7268D:2021-07-28
Rubber: Silicone [VMQ] Non-Oil Resistant Low Compression Set, 65 - 75 Type A Hardness
7/28/2021 - PDF - English - SAE
Learn More€75.00 -
€75.00
-
SAE AMS 3376D:2021-06-01
Sealing Compound, Non-Curing, Fluorosilicone Groove Injection Temperature and Fuel Resistant
6/1/2021 - PDF - English - SAE
Learn More€96.00 -
SAE AMS 3670/1C:2021-05-19
Bars, Rods, and Shapes Produced from Unfilled Polyamide-Imide (PAI) Material
5/19/2021 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3670/2C:2021-05-19
Molded or Extruded Bar, Rod, and Shapes Produced from 20% Graphite – 3% Polytetrafluoroethylene (PTFE) Filled Polyamide-Imide (PAI) Material
5/19/2021 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3670/3C:2021-05-19
Bar, Rod, and Shapes Produced from 12% Graphite - 3% Polytetrafluoroethylene (PTFE) Filled Polyamide-Imide (PAI) Material
5/19/2021 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3670/4D:2021-05-19
Bar, Rod, and Shapes Produced from 30% Glass Fiber Filled Polyamide-Imide (PAI) Material
5/19/2021 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3670/1C:2021-05-19
Bars, Rods, and Shapes Produced from Unfilled Polyamide-Imide (PAI) Material
5/19/2021 - PDF - English - SAE
Learn More€81.00 -
SAE AMS 3670C:2021-05-19
Molded or Extruded Bar, Rod, and Shapes Made from Polyamide-Imide (PAI) Plastic Material Both Filled and Unfilled Grades for High-Impact Strength and Mechanical Strength Applications in High Temperature Environments
5/19/2021 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 7267H:2021-05-19
Rubber: Vinyl-Methyl Silicone (VMQ) Hot Air Resistant Low Compression Set, 70 to 80 Type A Hardness for Seals in Hot Air Systems
5/19/2021 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3307E:2021-03-16
Elastomer: Rubber, Silicone (VMQ) Non-Oil-Resistant Low Compression Set 65 - 75 Shore A Hardness
3/16/2021 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3332G:2021-03-10
Elastomer: Methyl Phenyl Vinyl Silicone Rubber (PVMQ) Extreme Low-Temperature Resistant 15 - 30 Type A Hardness
3/10/2021 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3357H:2021-03-10
Elastomer: Silicone Rubber (VMQ) Aircraft Piston Engine Oil Resistant Compression Set Resistant 65 - 75 Type A Hardness
3/10/2021 - PDF - English - SAE
Learn More€75.00 -
€81.00
-
SAE AMS 3248D:2020-09-18
Ethylene Propylene (EPM) Rubber Phosphate Ester Resistant 55 - 65 (Stabilized: Sep 2020)
9/18/2020 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3265F:2020-09-09
Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting for Intermittent Use to 360 °F (182 °C)
9/9/2020 - PDF - English - SAE
Learn More€98.00 -
SAE AMS 7274K:2020-07-08
Rubber: Acrylonitrile-Butadiene (NBR) Engine Oil Resistance, 65 to 75 Hardness, for Seals in Aircraft Engine Oil Systems
7/8/2020 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3347D:2020-05-26
Elastomer: Methyl/Methyl Vinyl Silicone (MQ/VMQ) High Temperature Resistant High Strength/Tear Resistant 45 to 55 Type ‘A’ Durometer Hardness
5/26/2020 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3345G:2020-05-18
Elastomer: Methyl Phenyl Vinyl Silicone (PVMQ) Very Low Temperature/Aircraft Piston Engine Oil Resistant High Strength/Tear Resistant 45 to 55 Durometer Type ‘A’ Hardness For Products in Aircraft Piston Engine Oil/Low Temperature Environments
5/18/2020 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 7276J:2020-05-18
Rubber: Fluorocarbon (FKM) High Temperature - Fluid Resistant Low Compression Set/70 to 80 Type A Hardness For Seals in Fuel Systems and Specific Engine Oil Systems
5/18/2020 - PDF - English - SAE
Learn More€87.00 -
SAE AMS 7379A:2020-05-18
Rubber: Fluorocarbon Elastomer (FKM) Low Temperature Sealing Tg -40 °F (-40 °C) 70 to 80 Type ‘A’ Hardness For Elastomeric Seals in Aircraft Engine Oil, Fuel and Hydraulics Systems
5/18/2020 - PDF - English - SAE
Learn More€86.00 -
SAE AMS 3226J:2020-05-05
Elastomer: Acrylonitrile Butadiene Rubber (NBR) Hot Oil and Coolant Resistant, Low Swell 45 to 55 Type ‘A’ Durometer Hardness for Products in Engine Oil Systems/Coolant Systems
5/5/2020 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3212R:2020-04-28
Elastomer: Acrylonitrile Butadiene Rubber (NBR) Aromatic Fuel Resistant 55 to 65 Type ‘A’ Durometer Hardness For Products in: Aromatic and Aliphatic Fuel Systems
4/28/2020 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3217/2D:2020-03-04
Test Slabs, Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile, 65 - 75
3/4/2020 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3227J:2020-01-03
Acrylonitrile Butadiene (NBR) Rubber Hot Oil and Coolant Resistant, Low Swell 55 - 65 (Stabilized: Jan 2020)
1/3/2020 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3229K:2020-01-03
Acrylonitrile Butadiene (NBR) Rubber Hot Oil Resistant, Low Swell 75 - 85 (Stabilized: Jan 2020)
1/3/2020 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 7320G:2019-12-16
Rings, Sealing, Cast Leaded-Tin Bronze 80Cu - 16Sn - 5Pb As Cast
12/16/2019 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 7271K:2019-12-03
Rubber: Acrylonitrile-Butadiene Rubber (NBR) Fuel and Low Temperature Resistant 60 - 70 Type “A” Hardness For Seals in Fuel Systems
12/3/2019 - PDF - English - SAE
Learn More€101.00 -
SAE AMS 3306D:2019-11-26
Elastomer: Methyl/Methyl Vinyl Silicone, (MQ/MVQ) High Temperature/Gas Turbine Engine Oil/Phosphate Esther Hydraulic Fluid Resistant High Strength/High Tear/High Modulus 55 to 65 Type “A” Hardness For Products in High Temperature Environments/Gas Turbine Engine Oils
11/26/2019 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3215N:2019-11-05
Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 65 - 75 (Stabilized: Nov 2019)
11/5/2019 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3346H:2019-10-24
Elastomer: Phenyl Methyl Vinyl Silicone (PVMQ) Low Temperature/Engine Oil Resistant High Strength/High Tear 55 to 65 Type “A” Hardness For Products in Aircraft Piston Engine Oil/Low Temperature Environments
10/24/2019 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3217/1C:2019-10-16
Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75
10/16/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3217/7B:2019-10-16
Test Slabs, High Strength, Fluorosilicone (FVMQ) 55 - 65
10/16/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 7264B:2019-10-16
Rubber: Methyl Vinyl Silicone (MVQ) High Temperature Resistant, Low Compression Set 65 - 75 Type “A” Hardness For Seals in a Static Application - Resistant to 500 °F (260 °C)
10/16/2019 - PDF - English - SAE
Learn More€79.00 -
SAE AS 27195B:2019-09-03
SEAL, BONDED, ALUMINIM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-R-7362 (Stabilized: Sep 2019)
9/3/2019 - PDF - English - SAE
Learn More€75.00 -
SAE AS 27197C:2019-09-03
SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, SILICONE RUBBER, AMS7268 (Stabilized: Sep 2019)
9/3/2019 - PDF - English - SAE
Learn More€70.00 -
SAE AS 27198C:2019-09-03
SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROSILICONE RUBBER, MIL-DTL-25988 (Stabilized: Sep 2019)
9/3/2019 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3310A:2019-08-30
Elastomer: Silicone Rubber (MQ/VMQ) Flame Retardant, Low Smoke Density, Low Smoke Toxicity, High Strength, 65 - 75 Durometer Type A Hardness For Products in Pressurized Aircraft Compartment Interiors
8/30/2019 - PDF - English - SAE
Learn More€79.00 -
€75.00
-
SAE ARP 4118B:2019-07-09
Isolation and Corrosion Protection of Dissimilar Materials, Carbon Composite Structure Repair
7/9/2019 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3214M:2019-07-03
Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 35 - 45 (Stabilized: Jul 2019)
7/3/2019 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3253B:2019-06-17
Ethylene Propylene Rubber Phosphate Ester Resistant 65 - 75 (Stabilized: Jun 2019)
6/17/2019 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3260D:2019-06-17
Ethylene-Propylene-Diene (EPDM) Rubber General Purpose 45 - 55 (Stabilized: Jun 2019)
6/17/2019 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3193F:2019-06-14
Silicone Rubber Sponge Closed Cell, Medium, Extreme Low Temperature (Stabilized: Jun 2019)
6/14/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 3194F:2019-06-14
Silicone Rubber Sponge Closed Cell, Firm, Extreme Low Temperature (Stabilized: Jun 2019)
6/14/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 3195H:2019-06-14
Silicone Rubber Sponge Closed Cell, Medium (Stabilized: Jun 2019)
6/14/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 3617F:2019-06-13
Polyamide Type 6-6, Plastic Moldings and Extrusions (Stabilized: Jun 2019)
6/13/2019 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3220H:2019-06-11
Rubber, Synthetic General Purpose, Fluid Resistant 55 - 65 (Stabilized: Jun 2019)
6/11/2019 - PDF - English - SAE
Learn More€70.00 -
€70.00
-
SAE AMS 3320J:2019-05-10
Elastomer: Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced Heat and Weather Resistant 60 to 80 Type “A” Durometer Hardness
5/10/2019 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3305K:2019-04-05
Elastomer: Silicone Rubber, (VMQ) General Purpose 75 – 85 Durometer Type ‘A’ Hardness
4/5/2019 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3681F:2019-03-28
Adhesive, Electrically Conductive Silver-Filled Epoxy Resin (Stabilized: Mar 2019)
3/28/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 3704B:2019-03-28
Adhesive, Contact Polychloroprene (CR) Rubber, Resin Modified (Stabilized: Mar 2019)
3/28/2019 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3303L:2019-02-27
Elastomer: Silicone, Rubber (MQ/VMQ) General Purpose 55 - 65 Durometer Type "A" Hardness
2/27/2019 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3277K:2019-02-08
Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)
2/8/2019 - PDF - English - SAE
Learn More€101.00 -
SAE AS 27194C:2018-11-26
SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-P-5315 (Stabilized: Nov 2018)
11/26/2018 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3275D:2018-09-19
Sheet, Acrylonitrile Butadiene (NBR) Rubber and Non-Asbestos Fiber Fuel and Oil Resistant (Stabilized: Sep 2018)
9/19/2018 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3201M:2018-08-23
Butadiene Acrylonitrile (NBR) Rubber Dry Heat Resistant 35 - 45
8/23/2018 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3202N:2018-08-23
Butadiene Acrylonitrile (NBR) Rubber Dry Heat Resistant 55-65
8/23/2018 - PDF - English - SAE
Learn More€70.00 -
€70.00
-
€60.00
-
SAE AMS 3200L:2018-08-08
Butadiene Acrylonitrile (NBR) Rubber Petroleum-Base Hydraulic Fluid Resistant 55 - 65
8/8/2018 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3224A:2018-08-08
Nitrile-Butadiene Rubber Fuel, Fire, and Ozone Resistant 65 – 75
8/8/2018 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3301J:2018-05-16
Elastomer: Silicone Rubber (MQ/VMQ) General Purpose 35 – 45 Durometer Type ‘A’ Hardness
5/16/2018 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3325G:2018-05-16
Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 55 – 65 Durometer Type ‘A’ Hardness For Products in Fuel Systems / Lubrication Oils
5/16/2018 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3237G:2018-04-18
Butyl (IIR) Rubber Phosphate Ester Resistant 35 - 45 (Stabilized: Apr 2018)
4/18/2018 - PDF - English - SAE
Learn More€75.00 -
€60.00
-
SAE AMS 3334F:2018-03-23
Silicone Rubber Extreme Low-Temperature Resistant 35 - 45
3/23/2018 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 3337F:2018-03-23
Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 65 - 75
3/23/2018 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 3731/10C:2017-11-29
POTTING COMPOUND, EPOXY Bisphenol A-Type Unfilled, Room Temperature Cure, Semiflexible (Stabilized: Nov 2017)
11/29/2017 - PDF - English - SAE
Learn More€54.00 -
SAE AMS 3382D:2017-11-20
Elastomer: Tetrafluoroethylene/Propylene (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 75 to 90 Hardness
11/20/2017 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3284C:2017-11-16
Sealing Compound, Low Adhesion, for Removable Panels and Fuel Tank Inspection Plates
11/16/2017 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 7258B:2017-11-03
Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Fuel Resistant, Low Shrinkage 65 - 75
11/3/2017 - PDF - English - SAE
Learn More€89.00 -
SAE AMS 7260E:2017-11-03
Rings, Butadiene-Acrylonitrile (NBR) Rubber, Molded Fuel and Low Temperature Resistant 70 - 80
11/3/2017 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 7266B:2017-11-03
Rings, Sealing, Fluorocarbon Rubber General Purpose, High Temperature, Fuel and Oil Resistant 65 - 75
11/3/2017 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3217/8A:2017-10-18
Test Slabs, Fluoroelastomer (FKM), 70–80 Hardness, for Improved Gas Turbine Engine Oil Compatibility
10/18/2017 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3255B:2017-07-17
Sealing Tape, Sheet, or Gasket, Polytetrafluoroethylene, Expanded (EPTFE) Oil and Water Resistant
7/17/2017 - PDF - English - SAE
Learn More€103.00 -
SAE AMS 3210H:2017-04-12
Chloroprene (CR) Rubber Electrical Resistant 65 - 75 (Stabilized: Apr 2017)
4/12/2017 - PDF - English - SAE
Learn More€79.00 -
€47.00
-
SAE AMS 3832D:2016-12-16
Roving, Type "S-2" Glass Epoxy Resin Impregnated (Stabilized: Dec 2016)
12/16/2016 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3837E:2016-12-15
Cloth, Type "S" Glass 181 Style Fabric, Finish No. HTS-904 (Stabilized: Dec 2016)
12/15/2016 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3970/1A:2016-12-06
Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 1 - General Requirements
12/6/2016 - PDF - English - SAE
Learn More€137.00 -
SAE AMS 3970/2A:2016-12-06
Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 2 - Qualification Program for Fiber, Fabric, Carbon Prepreg, Film Adhesive and Non-Structural Glass Prepreg
12/6/2016 - PDF - English - SAE
Learn More€101.00 -
SAE AMS 3970/3A:2016-12-06
Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 3 - Purchasing Specification for Carbon Prepreg
12/6/2016 - PDF - English - SAE
Learn More€89.00 -
SAE AMS 3970/4A:2016-12-06
Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 4 - Purchasing Specification for Film Adhesive
12/6/2016 - PDF - English - SAE
Learn More€83.00 -
SAE AMS 3970A:2016-12-06
Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 0 - Introduction
12/6/2016 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 3970/5:2016-12-05
Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 5 - Purchasing Specification for Companion Non-Structural Glass Fiber Fabric Prepreg
12/5/2016 - PDF - English - SAE
Learn More€86.00 -
SAE AMS 3970/6:2016-12-05
Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 6 - Material Specification: Carbon Fiber Fabric Reinforced Epoxy Prepreg for Repair, Plain Weave Fabric, 193 g/m2, Adhesive Film for Repair and Non-Structural Glass Fiber Fabric Reinforced Epoxy Prepreg, 105 g/m2
12/5/2016 - PDF - English - SAE
Learn More€116.00 -
SAE AMS 2817G:2022-05-20
Packaging and Identification of Molded Elastomeric Seals and Sealing Components
11/22/2016 - PDF - English - SAE
Learn More€75.00 -
€70.00 -
SAE AMS 3755/1B:2016-11-18
Powder, Fumed Silicon Dioxide Thickening Efficiency 120 (Stabilized: Nov 2016)
11/18/2016 - PDF - English - SAE
Learn More€47.00 -
€60.00 -
SAE AMS 3612D:2016-11-17
Polyester Film Electrical Grade, General Purpose (Stabilized: Nov 2016)
11/17/2016 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3755/2B:2016-11-17
Powder, Fumed Silicon Dioxide Thickening Efficiency 95 (Stabilized: Nov 2016)
11/17/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3619E:2016-11-16
Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F) (Stabilized: Nov 2016)
11/16/2016 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3903/6B:2016-11-11
Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 181, 80 (180) (Stabilized: Nov 2016)
11/11/2016 - PDF - English - SAE
Learn More€54.00 -
SAE AMS 3687C:2016-11-10
Adhesive Film, Humidity-Resistant, Epoxy For Sandwich Panels, -55 to +95 °C (65 to +200 °F) (Stabilized: Nov 2016)
11/10/2016 - PDF - English - SAE
Learn More€83.00 -
SAE AMS 3698C:2016-11-10
Adhesive Film, Hot-Melt, Addition-Type Polyimide For Foam Sandwich Structure, -55 to +230 °C (-65 to +450 °F) (Stabilized: Nov 2016)
11/10/2016 - PDF - English - SAE
Learn More€96.00 -
€70.00 -
SAE AMS 3725/1B:2016-11-10
Core, Polyurethane Foam (Polyether) 2.0 Pounds Per Cubic Foot (32 kg/m3) Density (Stabilized: Nov 2016)
11/10/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3725/2B:2016-11-10
Core, Polyurethane Foam (Polyether) 4.0 Pounds Per Cubic Foot (64 kg/m3) Density (Stabilized: Nov 2016)
11/10/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3826C:2016-11-10
Cloth, Type “E” Glass “B” Stage Polyester Resin Impregnated 1581 and 7781 Type Fabric (Stabilized: Nov 2016)
11/10/2016 - PDF - English - SAE
Learn More€86.00 -
SAE AMS 3828D:2016-11-10
Glass Roving, Epoxy Resin Preimpregnated Type E Glass (Stabilized: Nov 2016)
11/10/2016 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3894/8C:2016-11-10
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 70000 (483) Tensile, 36000000 (248) Modulus, 80 (176) (Stabilized: Nov 2016)
11/10/2016 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 3903/1B:2016-11-10
Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 120, 175 (350) (Stabilized: Nov 2016)
11/10/2016 - PDF - English - SAE
Learn More€54.00 -
SAE AMS 3903/2B:2016-11-10
Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 181, 175 (350) (Stabilized: Nov 2016)
11/10/2016 - PDF - English - SAE
Learn More€54.00 -
SAE AMS 3276G:2016-10-25
Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)
10/25/2016 - PDF - English - SAE
Learn More€105.00 -
SAE AMS 3572C:2016-10-13
Resin Polyurethane, Foam-In-Place, Rigid (Stabilized: Oct 2016)
10/13/2016 - PDF - English - SAE
Learn More€83.00 -
SAE AMS 3684C:2016-10-13
Resin, Polyimide, Sealing High-Temperature Resistant, 315 °C (600 °F) Unfilled (Stabilized: Oct 2016)
10/13/2016 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3906/5C:2016-10-13
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For Hand and Machine Layup GL-I-36 - 150 (302) (Stabilized: Oct 2016)
10/13/2016 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3906/7C:2016-10-13
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For Hand and Machine Layup GL-III-33 - 95 (203) (Stabilized: Oct 2016)
10/13/2016 - PDF - English - SAE
Learn More€70.00 -
SAE AMS-P-21922A:2016-10-13
Plastic Rods and Tubes, Polyethylene (Stabilized: Oct 2016)
10/13/2016 - PDF - English - SAE
Learn More€89.00 -
SAE AS 6058A:2016-10-13
PACKING, PREFORMED, O-RING MOLDED FROM PERFLUOROETHER, FFO MATERIAL
10/13/2016 - PDF - English - SAE
Learn More€86.00 -
SAE AMS 3899/1C:2016-10-12
Carbon Fiber Tape and Sheet Polysulfone Resin Impregnated C PS 172 (1170) Tensile, 16 (110) Modulus, 120 (248) (Stabilized: Oct 2016)
10/12/2016 - PDF - English - SAE
Learn More€54.00 -
SAE AMS 3899/2C:2016-10-12
Carbon Fiber Tape and Sheet Polysulfone Resin Impregnated C PS 140 (965) Tensile, 27 (186) Modulus, 120 (248) (Stabilized: Oct 2016)
10/12/2016 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 3906/1C:2016-10-12
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For Hand and Machine Layup GL-I-36 - 120 (248) (Stabilized: Oct 2016)
10/12/2016 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3906/4C:2016-10-12
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For Hand and Machine Layup GL-III-26 - 150 (302) (Stabilized: Oct 2016)
10/12/2016 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3894/1C:2016-09-14
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 110000 (758) Tensile, 27000000 (186) Modulus, 175 (347) (Stabilized: Sep 2016)
9/14/2016 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 3894/2C:2016-09-14
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 150000 (1034) Tensile, 20000000 (138) Modulus, 175 (347) (Stabilized: Sep 2016)
9/14/2016 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 3894/3C:2016-09-14
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 150000 (1034) Tensile, 19000000 (131) Modulus, 80 (176) (Stabilized: Sep 2016)
9/14/2016 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 3894/5C:2016-09-14
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 110000 (758) Tensile, 27000000 (186) Modulus, 80 (176) (Stabilized: Sep 2016)
9/14/2016 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 3894/7C:2016-09-14
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90000 (621) Tensile, 40000000 (276) Modulus, 80 (176) (Stabilized: Sep 2016)
9/14/2016 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 3894/17B:2016-09-13
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200 (1379) Tensile, 18.0 (124) Modulus, 120 (248) (Stabilized: Sep 2016)
9/13/2016 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3894/16B:2016-09-13
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200000 (1379) Tensile, 21000000 (145) Modulus, 175 (347) (Stabilized: Sep 2016)
9/13/2016 - PDF - English - SAE
Learn More€81.00 -
SAE AMS 3352C:2016-08-09
Silicone Rubber, Fiberglass Fabric Reinforced (Stabilized: Aug 2016)
8/9/2016 - PDF - English - SAE
Learn More€79.00 -
SAE AMS-P-83310A:2016-07-12
Plastic Sheet, Polycarbonate, Transparent (Stabilized: Jul 2016)
7/12/2016 - PDF - English - SAE
Learn More€101.00 -
SAE AMS 3817E:2016-06-16
Nylon Braid, Flat Electrical Tying Resin Coated (Stabilized: Jun 2016)
6/16/2016 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3811C:2016-06-15
Rods, Aramid Fiber, Polyester Resin Coated Pultrusion (Stabilized: Jun 2016)
6/15/2016 - PDF - English - SAE
Learn More€89.00 -
SAE AMS 3812C:2016-06-15
Rods, Glass Fiber, Polyester Resin, Loaded Pultrusion (Stabilized: Jun 2016)
6/15/2016 - PDF - English - SAE
Learn More€89.00 -
SAE AMS 3678/10B:2016-02-29
Type 10 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 15% Carbon Fiber (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678/11A:2016-02-29
Type 11 10% Aromatic Polymer Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678/12A:2016-02-29
Type 12 10% Mineral, 2.5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678/13A:2016-02-29
Type 13 10% Polyimide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678/14A:2016-02-29
Type 14 40% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678/15A:2016-02-29
Type 15 15% Aromatic Polymer Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678/16A:2016-02-29
Type 16 15% Polyimide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678/1C:2016-02-29
Type 1 Virgin Polytetrafluoroethylene (PTFE) Moldings and Extrusions (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678/2B:2016-02-29
Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678/3B:2016-02-29
Type 3 15% Glass, 5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678/4B:2016-02-29
Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678/5B:2016-02-29
Type 5 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with Pigment (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678/6B:2016-02-29
Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678/7B:2016-02-29
Type 7 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678/8B:2016-02-29
Type 8 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 10% Carbon Fiber (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678/9C:2016-02-29
Type 9 Virgin Polytetrafluoroethylene (PTFE) Moldings with Pigment for AS4716 and AS5857 Backup Rings (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3678D:2016-02-29
Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled, Pigmented, and Filled (Stabilized: Feb 2016)
2/29/2016 - PDF - English - SAE
Learn More€79.00 -
SAE AIR 1387D:2016-01-15
Designing with Elastomers for use at Low Temperatures, Near or Below Glass Transition
1/15/2016 - PDF - English - SAE
Learn More€101.00 -
€122.00 -
SAE AMS 3961/1:2015-12-02
350 °F Autoclave Cure, Low Flow Toughened Epoxy Prepregs, Type 38, Class 2, Grade 193, Style 3K-70-PW, Fiber 1
12/2/2015 - PDF - English - SAE
Learn More€96.00 -
SAE AMS 3961/2:2015-12-02
350 °F Autoclave Cure, Low Flow Toughened Epoxy Prepregs, Type 35, Class 1, Grade 190, Fiber 2
12/2/2015 - PDF - English - SAE
Learn More€96.00 -
SAE AMS 3961/3:2015-12-02
350 °F Autoclave Cure, Low Flow Toughened Epoxy Prepregs, Type 35, Class 1, Grade 190, Fiber 1
12/2/2015 - PDF - English - SAE
Learn More€98.00 -
SAE AMS 3914A:2015-09-03
Advanced Composites Prepreg – Nominal 250 °F Cure – 12K Tow Carbon Fiber and Epoxy Resin, Plain Weave Fabric
9/3/2015 - PDF - English - SAE
Learn More€123.00 -
SAE AMS 3960A:2015-08-11
Advanced Composites Prepreg - Nominal 250 °F Cure - Carbon Fiber and Epoxy Resin, Unidirectional Tape
8/11/2015 - PDF - English - SAE
Learn More€124.00 -
SAE AMS 3915A:2015-08-10
Advanced Composites Prepreg – Nominal 250 °F Cure – Glass Fiber and Epoxy Resin, 7781 Weave Fabric
8/10/2015 - PDF - English - SAE
Learn More€124.00 -
SAE AMS-R-83412/1A:2015-07-27
Rubber, Ethylene-Propylene, Hydrazine Resistant, O-Rings Sizes and Tolerances (Stabilized: Jul 2015)
7/27/2015 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3529B:2015-05-13
Plastic Sheet and Film, Vinyl Copolymers Unplasticized (Stabilized: May 2015)
5/13/2015 - PDF - English - SAE
Learn More€83.00 -
SAE AMS 3647D:2015-05-13
Polyfluoroethylene Propylene Film and Sheet (Stabilized: May 2015)
5/13/2015 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3652D:2015-05-13
Polytetrafluoroethylene (PTFE) Film Non-Critical Grade (Stabilized: May 2015)
5/13/2015 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3661D:2015-05-13
Polytetrafluoroethylene (PTFE) Film Premium Grade (Stabilized: May 2015)
5/13/2015 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3662D:2015-05-13
Polytetrafluoroethylene Film General Purpose Grade (Stabilized: May 2015)
5/13/2015 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3676D:2015-05-13
Insulation, Sound and Thermal Resin-Bonded Glass Fiber, Medium Filament (Stabilized: May 2015)
5/13/2015 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3732B:2015-05-13
Potting Compound, Epoxy One Part, Filled, Heat Cure, Low CTE (Stabilized: May 2015)
5/13/2015 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3733C:2015-05-13
Potting Compound, Epoxy Two Part, Highly Filled, Heat Cure, High Compressive Strength (Stabilized: May 2015)
5/13/2015 - PDF - English - SAE
Learn More€86.00 -
€103.00 -
SAE AMS-R-5001A:2015-04-13
Rubber Cellular Sheet, Molded and Hand-Built Shapes, Latex Foam (Stabilized: Apr 2015)
4/13/2015 - PDF - English - SAE
Learn More€111.00 -
SAE AMS 3377A:2015-03-25
Sealing Compound, Electrically Conductive Corrosion Inhibiting (Stabilized: Mar 2015)
3/25/2015 - PDF - English - SAE
Learn More€109.00 -
SAE AMS 7257E:2014-09-05
Perfluorocarbon (FFKM) Engine Oil, Fuel and Hydraulic Fluid Resistant 70 to 80 Hardness For High Temperature Seals in Engine Oil Systems, Fuel Systems and Hydraulic Systems
9/5/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3710C:2022-12-29
Sandwich Structures, Glass Fabric-Resin Low Pressure Molded, Heat Resistant
8/19/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3912A:2022-08-10
Radomes, Foam Sandwich Polyimide/Quartz Cloth Construction
8/19/2014 - PDF - English - SAE
Learn More€96.00 -
€96.00 -
SAE AMS 3898/3B:2022-04-13
Interleaf Carrier Material, Composite Tape Polyethylene Coated Paper, Unperforated 0.0035 inch (0.089 mm)
8/18/2014 - PDF - English - SAE
Learn More€39.00 -
€66.00 -
€66.00 -
SAE AMS 3729A:2022-10-04
Epoxy Resin Matrix, Thermosetting Moderate Temperature Resistant, Unfilled
8/17/2014 - PDF - English - SAE
Learn More€79.00
