49.025.20 : Aluminium
-
UNE-EN 3557:2022
Aerospace series - Aluminium alloy AL-P6061-T4 - Drawn tube for pressure applications - 0,6 mm = a = 3 mm
10/12/2022 - PDF - English -
Learn More€42.00 -
UNE-EN 4900:2022
Aerospace series - Aluminium alloy 5086 - H111 - Extruded bars - 10 mm = D = 300 mm
10/12/2022 - PDF - English -
Learn More€38.00 -
UNE-EN 6025:2021
Aerospace series - Plates - Aluminium alloy 2024 - Close tolerances flatness - Thickness - 6 mm < a = 55 mm - Dimensions
4/1/2021 - PDF - English -
Learn More€42.00 -
UNE-EN 4707:2020
Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium (Endorsed by Asociación Española de Normalización in February of 2020.)
2/1/2020 - PDF - English -
Learn More€59.00 -
UNE-EN 2390:2019
Aerospace series - Aluminium alloy 6082-T6 - Tubes for structures 0,6 mm = a = 12,5 mm
11/1/2019 - PDF - English -
Learn More€42.00 -
UNE-EN 4827:2019
Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English -
Learn More€68.00 -
UNE-EN 2125:2019
Aerospace series - Aluminium alloy Al-P16- - T6151 - Plates - 6 mm < a = 120 mm
10/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 2638:2019
Aerospace series - Aluminium alloy 2024- - T3 - Extruded bar and section - 1,2 mm = (a or D) = 150 mm with coarse peripheral grain control
7/1/2019 - PDF - English -
Learn More€59.00 -
UNE-EN 2114:2019
Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D = 10 mm
7/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 2510:2019
Aerospace series - Aluminium alloy 2024- - T42 - Drawn tubes for structural applications (Endorsed by Asociación Española de Normalización in July of 2019.)
7/1/2019 - PDF - English -
Learn More€59.00 -
UNE-EN 2320:2019
Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a <= 75 mm (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 4400-2:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 2: Aluminium and aluminium alloy sheet and strip (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€76.00 -
UNE-EN 4289:2019
Aerospace series - Aluminium alloy AL-P7175- Forging stock (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 2321:2019
Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a <= 150 mm (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€42.00 -
UNE-EN 4400-3:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€75.00 -
UNE-EN 4400-1:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 1: Aluminium and aluminium alloy plate (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€76.00 -
UNE-EN 2699:2019
Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm <= D <= 50 mm (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 4400-6:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 6: Aluminium alloy forging stock (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€66.00 -
UNE-EN 2341:2018
Aerospace series - Aluminium and aluminium alloy - Square and rectangular extruded bars - Dimensions (Endorsed by Asociación Española de Normalización in February of 2019.)
2/1/2019 - PDF - English -
Learn More€57.00 -
UNE-EN 2715:2018
Aerospace series - Macrographic examination of aluminium and aluminium alloy wrought products, forging stock and forgings (Endorsed by Asociación Española de Normalización in February of 2019.)
2/1/2019 - PDF - English -
Learn More€24.00 -
UNE-EN 2726:2018
Aerospace series - Aluminium alloy Al-C42201 - T6 - Sand castings - a = 20 mm
1/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 2709:2018
Aerospace series - Aluminium alloy 2024- - T3510 - Bars and sections - 1,2 mm = (a or D) = 150 mm - With peripheral coarse grain control
1/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 2728:2018
Aerospace series - Aluminium alloy AL-C42101 - T6 - Sand casting - a = 20 mm
1/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 2716:2018
Aerospace series - Test method - Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys (Endorsed by Asociación Española de Normalización in January of 2019.)
1/1/2019 - PDF - English -
Learn More€24.00 -
UNE-EN 2813:2018
Aerospace series - Aluminium alloy AL-P-6061- - T6 - Drawn tube for pressure applications - 0,6 mm = a = 12,5 mm
1/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 2319:2018
Aerospace series - Aluminium alloy 2024- - T3510 - Drawn bar - a <= 75 mm (Endorsed by Asociación Española de Normalización in September of 2018.)
9/1/2018 - PDF - English -
Learn More€38.00 -
UNE-EN 2387:2018
Aerospace series - Aluminium alloy 2014A- - T6 - Tubes for structures - 0,6 mm = a = 12,5 mm
9/1/2018 - PDF - English -
Learn More€38.00 -
UNE-EN 3719:2018
Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard (Endorsed by Asociación Española de Normalización in September of 2018.)
9/1/2018 - PDF - English -
Learn More€38.00 -
UNE-EN 2004-7:2017
Aerospace series - Test methods for aluminium and aluminium alloy products - Part 7: Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys (Endorsed by Asociación Española de Normalización in September of 2017.)
9/1/2017 - PDF - English -
Learn More€42.00 -
UNE-EN 2053:2017
Aerospace series - U-section aluminium alloy folded profiles - Dimensions (Endorsed by Asociación Española de Normalización in September of 2017.)
9/1/2017 - PDF - English -
Learn More€35.00 -
UNE-EN 3982:2015
Aerospace series - Aluminium alloy AL-P7050 - AlZn6CuMgZr - T7451 - Plates - 6 mm < a = 160 mm
1/1/2016 - PDF - English -
Learn More€38.00 -
UNE-EN 2633:2015
Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Extruded bars and sections - 1,2 mm <= De <= 160 mm with peripheral coarse grain control (Endorsed by AENOR in January of 2016.)
1/1/2016 - PDF - English -
Learn More€38.00 -
UNE-EN 6031:2015
Aerospace series - Fibre reinforced plastics - Test method - Determination of in-plane shear properties (± 45° tensile test) (Endorsed by AENOR in January of 2016.)
1/1/2016 - PDF - English -
Learn More€57.00 -
UNE-EN 3997:2015
Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T3 - Sheet and strip - 0,4 mm <= a <= 6 mm (Endorsed by AENOR in January of 2016.)
1/1/2016 - PDF - English -
Learn More€38.00 -
UNE-EN 2704:2015
Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Drawn bars - De = 75 mm
1/1/2016 - PDF - English -
Learn More€38.00 -
UNE-EN 6032:2015
Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures (Endorsed by AENOR in January of 2016.)
1/1/2016 - PDF - English -
Learn More€57.00 -
UNE-EN 4725:2014
Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T351 - Plate - 6 mm < a <= 150 mm (Endorsed by AENOR in December of 2014.)
12/1/2014 - PDF - English -
Learn More€38.00 -
UNE-EN 2512:2014
Aerospace series - Aluminium alloy AL-P7175 - T7351 - Plate - 6mm < a <= 100 mm (Endorsed by AENOR in November of 2014.)
11/1/2014 - PDF - English -
Learn More€38.00 -
UNE-EN 4293:2014
Aerospce series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D <= 150 mm (Endorsed by AENOR in June of 2014.)
6/1/2014 - PDF - English -
Learn More€38.00 -
UNE-EN 3983:2013
Aerospace series - Aluminium alloy AL-P7050- - T7651 - Plate - 6 mm < a <= 160 mm (Endorsed by AENOR in November of 2013.)
11/1/2013 - PDF - English -
Learn More€38.00 -
UNE-EN 3354:2013
Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Sheet for superplastic forming - a <= 6 mm (Endorsed by AENOR in March of 2013.)
3/1/2013 - PDF - English -
Learn More€38.00 -
UNE-EN 3355:2012
Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Extruded section - De <= 150 mm - 900 MPa <= Rm <= 1 160 MPa (Endorsed by AENOR in April of 2012.)
4/1/2012 - PDF - English -
Learn More€38.00 -
UNE-EN 3459:2010
Aerospace series - Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm < a <= 50 mm (Endorsed by AENOR in June of 2010.)
6/1/2010 - PDF - English -
Learn More€35.00 -
UNE-EN 2116:2009
Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
UNE-EN 3115:2009
Aerospace series - Aluminium alloy 7050-T73 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
UNE-EN 2117:2009
Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
UNE-EN 2115:2009
Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
UNE-EN 4004:2007
Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip 0,4 mm =< a =< 6 mm (Endorsed by AENOR in May of 2007.)
5/1/2007 - PDF - English -
Learn More€35.00 -
UNE-EN 4005:2007
Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm =< a =< 6 mm (Endorsed by AENOR in May of 2007.)
5/1/2007 - PDF - English -
Learn More€35.00 -
UNE-EN 3998:2007
Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip 0,3 mm =< a =< 6 mm (Endorsed by AENOR in May of 2007.)
5/1/2007 - PDF - English -
Learn More€35.00 -
UNE-EN 4006:2007
Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm =< a =< 6 mm (Endorsed by AENOR in May of 2007.)
5/1/2007 - PDF - English -
Learn More€35.00 -
UNE-EN 3339:2006
Aerospace series - Aluminium alloy AL-P7010- - T76 - Die forgings - a <= 200 mm (Endorsed by AENOR in March of 2007.)
3/1/2007 - PDF - English -
Learn More€28.00 -
UNE-EN 3342:2005
Aerospace series - Aluminium alloy AL-P6061 - T4 or T42 - Drawn or extruded bar and section - a or D =< 150 mm (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 2702:2005
Aerospace series - Aluminium alloy AL-P6061 - T6 or T62 - Drawn or extruded bar and section - a or D =<200 mm (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 2635:2005
Aerospace series - Aluminium alloy AL-P2014A - T6511 - Extruded bar and section - a or D =<200 mm with peripheral coarse grain control (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 3344:2005
Aerospace series - Aluminium alloy AL-P7050 - T76511 - Extruded bar and section - a or D =< 150 mm with peripheral coarse grain control (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 3338:2005
Aerospace series - Aluminium alloy AL-P7050 - T74511 - Extruded bar and section - a or D =< 150 mm with peripheral coarse grain control (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 2632:2005
Aerospace series - Aluminium alloy AL-P7075 - T73511 - Extruded bar and section - a or D =<150 mm with peripheral coarse grain control (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 3347:2005
Aerospace series - Aluminium alloy AL-P2024 - T8511 - Extruded bar and section - a or D =<150 mm with peripheral coarse grain control (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 2087:2005
Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet and strip - 0,4 mm = 2/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 2072:2005
Aerospace series - Aluminium AL-P1050A - H14 - Sheet and strip - 0,4 mm = 2/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 2422:2005
Aerospace series - Aluminium alloy AL-P2124-T351 - Plate - 25 mm 10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 2696:2005
Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm <=a <=6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4292:2005
Aerospace series - Aluminium alloy AL-R39002 - Forging stock (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4450:2005
Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet - 0,8 mm <=a <=6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 2092:2005
Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm <=a <=6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 2694:2005
Aerospace series - Aluminium alloy AL-P6061- - T6 or T62 - Sheet and strip - 0,4 mm <=a <=6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 2803:2005
Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm <=a <=6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4286:2005
Aerospace series - Aluminium alloy AL-P8090-T89 - Die forgings - a <=125 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4449:2005
Aerospace series - Aluminium alloy AL-P7050 - T76 - Sheet - 0,8 mm =< a =< 6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€35.00 -
UNE-EN 2089:2005
Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Sheet and strip - 0,4 mm <=a <=6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 2511:2005
Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm 10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 2703:2005
Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm <=a <=6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 2088:2005
Aerospace series - Aluminium alloy AL-P2014A - T4 or T42 - Clad sheet and strip - 0,4 mm =< a =< 6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€35.00 -
UNE-EN 4215:2005
Aerospace series - Aluminium alloy AL-P7175-T651 - Plate - 6 mm 10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 2395:2005
Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm <=a <=6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 2695:2005
Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip - 0,3 mm <=a <=6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4291:2005
Aerospace series - Aluminium alloy AL-P8090 - Forging stock (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4313:2005
Aerospace series - Aluminium alloy AL-P6013-T6 - Sheet and strip - 0,5 mm <=a <=6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 2090:2005
Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip 0,3 mm <=a <=6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 2693:2005
Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm <=a <=6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 2802:2005
Aerospace series - Aluminium alloy AL-P7475-T761 - Sheet and strip - 0,6 mm <=a <=6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4283:2005
Aerospace series - Aluminium alloy AL-P2219-T87 - Plate - 6 mm 10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4204:2005
Aerospace series - Aluminium alloy AL-P8090 - T841 - Sheet - 0,6 mm =< a =< 6 mm (Endorsed by AENOR in October of 2005.)
10/1/2005 - PDF - English -
Learn More€35.00 -
UNE-EN 4247:2005
Aerospace series - Aluminium alloy AL-P2024-T42 - Plate - 6 mm 10/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4202:2005
Aerospace series - Aluminium alloy AL-P6082-T651 - Plate - 6 mm 9/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4213:2005
Aerospace series - Aluminium alloy AL-P6061-T651 - Plate - 6 mm 9/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4211:2005
Aerospace series - Aluminium alloy AL-P2024-T42 - Clad plate - 6 mm 9/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4203:2005
Aerospace series - Aluminium alloy AL-P8090-T89 - Sheet - 0,6 mm <=a <=6 mm (Endorsed by AENOR in September of 2005.)
9/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4214:2005
Aerospace series - Aluminium alloy AL-P7010-T651 - Plate - 6 mm 9/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4102:2005
Aerospace series - Aluminium alloy AL-P2219-T81 - Clad sheet and strip - 0,5 mm <=a <=6 mm (Endorsed by AENOR in September of 2005.)
9/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4212:2005
Aerospace series - Aluminium alloy AL-P5086-H111 - Plate - 6 mm 9/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4209:2005
Aerospace series - Aluminium alloy AL-P2219-T851 - Plate - 6 mm 9/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 3341:2005
Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm <=a <=6 mm (Endorsed by AENOR in August of 2005.)
8/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4007:2005
Aerospace series - Aluminium alloy AL-P6082-T6 or T62 - Sheet and strip - 0,4 mm <=a <=6 mm (Endorsed by AENOR in August of 2005.)
8/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 3333:2005
Aerospace series - Aluminium alloy AL-P7475-T762 - Sheet and strip - 0,6 mm <=a <=6 mm (Endorsed by AENOR in August of 2005.)
8/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 3872:2005
Aerospace series - Aluminium alloy AL-R39002-H112 - Die forgings - a <=200 mm (Endorsed by AENOR in August of 2005.)
8/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4101:2005
Aerospace series - Aluminium alloy AL-P2024-T4 - Sheet and strip with improved stretch forming capability - 0,4 mm <=a <=6 mm (Endorsed by AENOR in August of 2005.)
8/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 3474:2005
Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm <=a <=6 mm (Endorsed by AENOR in August of 2005.)
8/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4099:2005
Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Clad sheet and strip - 0,5 mm <=a <=6 mm (Endorsed by AENOR in August of 2005.)
8/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 3335:2005
Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0,8 mm <=a <=6 mm (Endorsed by AENOR in August of 2005.)
8/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 3979:2005
Aerospace series - Aluminium alloy AL-P8090-O2 - Sheet for superplastic forming (SPF) - 0,8 mm <=a <=6 mm (Endorsed by AENOR in August of 2005.)
8/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 3332:2005
Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm <=a <=6 mm (Endorsed by AENOR in August of 2005.)
8/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 3552:2005
Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm <=a <=6 mm (Endorsed by AENOR in August of 2005.)
8/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4100:2005
Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Sheet and strip - 0,5 mm <=a <=6 mm (Endorsed by AENOR in August of 2005.)
8/1/2005 - PDF - English -
Learn More€28.00 -
UNE-EN 4287:2005
Aerospace series - Aluminium alloy AL-P7010 - Forging stock (Endorsed by AENOR in April of 2005.)
4/1/2005 - PDF - English -
Learn More€35.00 -
UNE-EN 2486:2005
Aerospace series - Aluminium alloy AL-P2618A - Forging stock (Endorsed by AENOR in April of 2005.)
4/1/2005 - PDF - English -
Learn More€35.00 -
UNE-EN 2085:2004
Aerospace series - Aluminium alloy AL-P2618A - T6 - Hand and die forgings - a <= 150 mm (Endorsed by AENOR in March of 2005.)
3/1/2005 - PDF - English -
Learn More€35.00 -
UNE-EN 2687:2004 (R2018)
Aerospace series - Aluminium alloy AL-P7010 - T7451 - Plate - 6 mm < a <= 160 mm (Endorsed by AENOR in March of 2005.)
3/1/2005 - PDF - English -
Learn More€35.00 -
UNE-EN 2681:2004
Aerospace series - Aluminium alloy AL-P7010- - T74 - Hand and die forgings - a <= 150 mm (Endorsed by AENOR in March of 2005.)
3/1/2005 - PDF - English -
Learn More€35.00 -
UNE-EN 2086:2004
Aerospace series - Aluminium alloy AL-P2618A - T851 - Hand and die forgings - a <= 150 mm (Endorsed by AENOR in March of 2005.)
3/1/2005 - PDF - English -
Learn More€35.00 -
UNE-EN 3553:2004 (R2018)
Aerospace series - Aluminium alloy AL-P2618A - T6511 - Extruded bar and section - a or D <= 160 mm (Endorsed by AENOR in March of 2005.)
3/1/2005 - PDF - English -
Learn More€35.00 -
UNE-EN 2684:2004 (R2018)
Aerospace series - Aluminium alloy AL-P7010- - T7651 - Plate - 6 mm < a <= 140 mm (Endorsed by AENOR in March of 2005.)
3/1/2005 - PDF - English -
Learn More€35.00 -
UNE-EN 2256:2004
Aerospace series - Aluminium alloy AL-P2618A - T852 - Hand and die forgings - a <= 150 mm (Endorsed by AENOR in March of 2005.)
3/1/2005 - PDF - English -
Learn More€35.00 -
UNE-EN 2050:2002 (R2017)
Aerospace series - Extruded T-section, in aluminium alloys - Dimensions.
4/30/2002 - PDF - Spanish -
Learn More€52.00 -
UNE-EN 2048:2002 (R2017)
Aerospace series - Extruded L-section, in aluminium alloys - Dimensions.
4/30/2002 - PDF - English -
Learn More€62.40 -
UNE-EN 2599:2002 (R2017)
Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm < a < 3,2 mm - Dimensions.
4/30/2002 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2049:2002 (R2017)
Aerospace series - Extruded channel section, in aluminium alloys - Dimensions.
4/30/2002 - PDF - English -
Learn More€55.20 -
UNE-EN 4341:2002 (R2017)
Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod.
4/30/2002 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2050:2002 (R2017)
Aerospace series - Extruded T-section, in aluminium alloys - Dimensions.
4/30/2002 - PDF - English -
Learn More€62.40 -
UNE-EN 2047:2002 (R2017)
Aerospace series - Beaded L-section extruded, in aluminium alloys - Dimensions.
4/30/2002 - PDF - Spanish -
Learn More€34.00 -
UNE-EN 2599:2002 (R2017)
Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm < a < 3,2 mm - Dimensions.
4/30/2002 - PDF - English -
Learn More€55.20 -
UNE-EN 2048:2002 (R2017)
Aerospace series - Extruded L-section, in aluminium alloys - Dimensions.
4/30/2002 - PDF - Spanish -
Learn More€52.00 -
UNE-EN 4341:2002 (R2017)
Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod.
4/30/2002 - PDF - English -
Learn More€55.20 -
UNE-EN 2049:2002 (R2017)
Aerospace series - Extruded channel section, in aluminium alloys - Dimensions.
4/30/2002 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2047:2002 (R2017)
Aerospace series - Beaded L-section extruded, in aluminium alloys - Dimensions.
4/30/2002 - PDF - English -
Learn More€40.80 -
UNE-EN 2066:2001 (R2017)
Aerospace series- Extruded section in aluminium alloys- General tolerances. (Endorsed by AENOR in February of 2002.)
2/1/2002 - PDF - English -
Learn More€38.00 -
UNE-EN 2667-6:2001 (R2017)
Aerospace series- Non-metallic materials- Foaming structural adhesives- Test methods- Part 6: Determination of water absorption. (Endorsed by AENOR in February of 2002.)
2/1/2002 - PDF - English -
Learn More€28.00 -
UNE-EN 2044:2001 (R2017)
Aerospace series- Round bars, drawn, in aluminium and aluminium alloys- Tolerance class h 11- Diameter 4 mm
Learn More€24.00 -
UNE-EN 2134:2001 (R2017)
Aerospace series- Round bars, extruded in aluminium and aluminium alloys- Diameter 10 mm
Learn More€28.00 -
UNE-EN 2071:2001 (R2017)
Aerospace series- Sheets in aluminium and aluminium alloys- Thickness 0,25
Learn More€35.00 -
UNE-EN 2743:2001 (R2017)
Aerospace series- Fibre reinforced plastics- Standard procedures for conditioning prior to testing unaged materials. (Endorsed by AENOR in February of 2002.)
2/1/2002 - PDF - English -
Learn More€28.00 -
UNE-EN 2045:2001 (R2017)
Aerospace series- Square bars, drawn in aluminium alloys- Tolerance class h 11- Thickness 6 mm
Learn More€28.00 -
UNE-EN 3145:2001 (R2017)
Aerospace series- Round bars, hot rolled in steel- Normal tolerances- Diameter 6 mm
Learn More€28.00 -
UNE-EN 2046:2001 (R2017)
Aerospace series- Hexagonal bars, drawn in aluminium and aluminium alloys- Tolerance class h 11- Width across flats 7 mm < a< 50 mm- Dimensions. (Endorsed by AENOR in February of 2002.)
2/1/2002 - PDF - English -
Learn More€28.00 -
UNE-EN 2131:2001 (R2017)
Aerospace series- Plates in aluminium alloys- Thickness 6 mm
Learn More€35.00 -
UNE-EN 4324:2001 (R2017)
Aerospace series. Aluminium alloy AL-W42201. Filler metal for welding. Rod. (Endorsed by AENOR in February of 2002.)
2/1/2002 - PDF - English -
Learn More€28.00 -
UNE-EN 2258:1997
AEROSPACE SERIES. CIRCULAR TUBES FOR FLUIDS IN ALUMINIUM AND ALUMINIUM ALLOYS. DIAMETER 3,2 MM <= D <= 100 MM. THICKNESS 0,6 MM <= A <= 2,5 MM. DIMENSIONS.
7/24/1997 - PDF - English -
Learn More€46.80 -
UNE-EN 2257:1997
AEROSPACE SERIES. CIRCULAR TUBES FOR STRUCTURES IN ALUMINIUM AND ALUMINIUM ALLOYS. DIAMETER 6 MM <= D <= 100 MM. THICKNESS 1 MM <= A <= 6 MM. DIMENSIONS.
7/24/1997 - PDF - English -
Learn More€40.80 -
UNE-EN 2258:1997
AEROSPACE SERIES. CIRCULAR TUBES FOR FLUIDS IN ALUMINIUM AND ALUMINIUM ALLOYS. DIAMETER 3,2 MM <= D <= 100 MM. THICKNESS 0,6 MM <= A <= 2,5 MM. DIMENSIONS.
7/24/1997 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2257:1997
AEROSPACE SERIES. CIRCULAR TUBES FOR STRUCTURES IN ALUMINIUM AND ALUMINIUM ALLOYS. DIAMETER 6 MM <= D <= 100 MM. THICKNESS 1 MM <= A <= 6 MM. DIMENSIONS.
7/24/1997 - PDF - Spanish -
Learn More€34.00 -
€53.00
-
€63.60
-
UNE-EN 2004-1:1996
AEROSPACE SERIES. TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOY PRODUCTS. PART 1: DETERMINATION OF ELECTRICAL CONDUCTIVITY OF WROUGHT ALUMINIUM ALLOYS.
2/12/1996 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 2636:1996
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6082-T6. EXTRUDED BARS AND SECTIONS A OR D<= 200 MM WITH PERIPHERAL COARSE GRAIN CONTROL.
2/12/1996 - PDF - English -
Learn More€40.80 -
UNE-EN 2004-1:1996
AEROSPACE SERIES. TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOY PRODUCTS. PART 1: DETERMINATION OF ELECTRICAL CONDUCTIVITY OF WROUGHT ALUMINIUM ALLOYS.
2/12/1996 - PDF - English -
Learn More€55.20 -
UNE-EN 2636:1996
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6082-T6. EXTRUDED BARS AND SECTIONS A OR D<= 200 MM WITH PERIPHERAL COARSE GRAIN CONTROL.
2/12/1996 - PDF - Spanish -
Learn More€34.00 -
UNE-EN 2630:1996
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009-T74511. EXTRUDED BARS AND SECTIONS A OR D<= 125 MM WITH PERIPHERAL COARSE GRAIN CONTROL.
2/6/1996 - PDF - Spanish -
Learn More€34.00 -
UNE-EN 2004-5:1996
AEROSPACE SERIES. TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOYS PRODUCTOS. PART 5: DETERMINATION OF CLADDING THICKNESS AND COPPER DIFFUSION OF CLAD SEMI-FINISHED PRODUCTS.
2/6/1996 - PDF - English -
Learn More€30.00 -
UNE-EN 2630:1996
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009-T74511. EXTRUDED BARS AND SECTIONS A OR D<= 125 MM WITH PERIPHERAL COARSE GRAIN CONTROL.
2/6/1996 - PDF - English -
Learn More€40.80 -
UNE-EN 2004-5:1996
AEROSPACE SERIES. TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOYS PRODUCTOS. PART 5: DETERMINATION OF CLADDING THICKNESS AND COPPER DIFFUSION OF CLAD SEMI-FINISHED PRODUCTS.
2/6/1996 - PDF - Spanish -
Learn More€25.00 -
UNE-EN 2076-1/A1:1994
AEROSPACE SERIES. ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTING. TECHNICAL SPECIFICATIONS. PART 1: GENERAL REQUIREMENTS.
3/17/1994 - PDF - English -
Learn More€30.00 -
UNE-EN 2076-1/A1:1994
AEROSPACE SERIES. ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTING. TECHNICAL SPECIFICATIONS. PART 1: GENERAL REQUIREMENTS.
3/17/1994 - PDF - Spanish -
Learn More€25.00 -
UNE-EN 2101:1994 (R2017)
AEROSPACE SERIES. CHROMIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS.
1/20/1994 - PDF - English -
Learn More€69.60 -
UNE-EN 2101:1994 (R2017)
AEROSPACE SERIES. CHROMIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS.
1/20/1994 - PDF - Spanish -
Learn More€58.00 -
UNE-EN 2128:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-T7351. DRAWN BARS 6 MM <= A OR D <= 75 MM.
6/24/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2326:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6082-T6. EXTRUDED BARS AND SECTIONS A OR D <= 200 mm.
6/24/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2384:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2014A-T6511. EXTRUDED BARS AND SECTIONS A OR D <= 150 MM.
6/24/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2093:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009-T74. HAND FORGINGS 20 MM <=a <= 150 mm.
6/24/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2100:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2014A T4511. EXTRUDED BARS AND SECTIONS A OR D<=200 mm.
6/24/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2127:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-T73511. EXTRUDED BARS AND SECTIONS A OR D <= 100 MM.
6/24/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2318:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2024-T3511. EXTRUDED BARS AND SECTIONS 1,2 MM <= A OR D <= 150 MM.
6/24/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2381:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009-T7452. HAND FORGINGS 40 MM <= a <= 150 mm.
6/24/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2094:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009-T74. DIE FORGINGS 3 MM<=A <=150 MM.
6/24/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2126:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-T651. PLATES 6 MM < A <= 80MM.
6/24/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2128:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-T7351. DRAWN BARS 6 MM <= A OR D <= 75 MM.
6/24/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2284:1993 (R2017)
AEROSPACE SERIEIS. SULPHURIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS.
6/24/1993 - PDF - Spanish -
Learn More€52.00 -
UNE-EN 2326:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6082-T6. EXTRUDED BARS AND SECTIONS A OR D <= 200 mm.
6/24/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2385:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009-T74511. EXTRUDED BARS AND SECTIONS A OR D <= 125 MM.
6/24/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2093:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009-T74. HAND FORGINGS 20 MM <=a <= 150 mm.
6/24/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2127:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-T73511. EXTRUDED BARS AND SECTIONS A OR D <= 100 MM.
6/24/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2318:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2024-T3511. EXTRUDED BARS AND SECTIONS 1,2 MM <= A OR D <= 150 MM.
6/24/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2384:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2014A-T6511. EXTRUDED BARS AND SECTIONS A OR D <= 150 MM.
6/24/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2100:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2014A T4511. EXTRUDED BARS AND SECTIONS A OR D<=200 mm.
6/24/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2126:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-T651. PLATES 6 MM < A <= 80MM.
6/24/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2284:1993 (R2017)
AEROSPACE SERIEIS. SULPHURIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS.
6/24/1993 - PDF - English -
Learn More€62.40 -
UNE-EN 2381:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009-T7452. HAND FORGINGS 40 MM <= a <= 150 mm.
6/24/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2385:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009-T74511. EXTRUDED BARS AND SECTIONS A OR D <= 125 MM.
6/24/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2094:1993
AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009-T74. DIE FORGINGS 3 MM<=A <=150 MM.
6/24/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2082-3:1993
AEROSPACE SERIES. ALUMINIUM ALLOY FORGING STOCK AND FORGINGS. TECHNICAL SPECIFICATION. PART 3: PRE-PRODUCTION AND PRODUCTION FORGINGS.
5/19/1993 - PDF - Spanish -
Learn More€52.00 -
UNE-EN 2070-5:1993
AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOYS WROUGHT PRODUCTS. TECHNICAL SPECIFICATIONS. PART 5: TUBE USED UNDER PRESSURE.
5/19/1993 - PDF - Spanish -
Learn More€53.00 -
UNE-EN 2082-3:1993
AEROSPACE SERIES. ALUMINIUM ALLOY FORGING STOCK AND FORGINGS. TECHNICAL SPECIFICATION. PART 3: PRE-PRODUCTION AND PRODUCTION FORGINGS.
5/19/1993 - PDF - English -
Learn More€62.40 -
UNE-EN 2070-5:1993
AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOYS WROUGHT PRODUCTS. TECHNICAL SPECIFICATIONS. PART 5: TUBE USED UNDER PRESSURE.
5/19/1993 - PDF - English -
Learn More€63.60 -
UNE-EN 2070-4:1993
AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATIONS. PART 4: TUBE FOR STRUCTURE.
5/13/1993 - PDF - English -
Learn More€58.80 -
UNE-EN 2076-1:1993 (R2018)
ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS. TECHNICAL SPECIFICATION. PART 1: GENERAL REQUIREMENTS.
5/13/1993 - PDF - Spanish -
Learn More€49.00 -
UNE-EN 2076-2:1993 (R2018)
ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS. TECHNICAL SPECIFICATION. PART 2: INGOTS FOR REMELTING.
5/13/1993 - PDF - English -
Learn More€40.80 -
UNE-EN 2070-6:1993
AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUDCTS. TECHNICAL SPECIFICATION. PART 6: RIVET WIRE.
5/13/1993 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 2076-1:1993 (R2018)
ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS. TECHNICAL SPECIFICATION. PART 1: GENERAL REQUIREMENTS.
5/13/1993 - PDF - English -
Learn More€58.80 -
UNE-EN 2070-4:1993
AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATIONS. PART 4: TUBE FOR STRUCTURE.
5/13/1993 - PDF - Spanish -
Learn More€49.00 -
UNE-EN 2070-6:1993
AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUDCTS. TECHNICAL SPECIFICATION. PART 6: RIVET WIRE.
5/13/1993 - PDF - English -
Learn More€46.80 -
UNE-EN 2076-2:1993 (R2018)
ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS. TECHNICAL SPECIFICATION. PART 2: INGOTS FOR REMELTING.
5/13/1993 - PDF - Spanish -
Learn More€34.00 -
UNE-EN 2076-3:1993 (R2018)
ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS. TECHNICAL SPECIFICATIONS. PART 3: PRE-PRODUCTION AND PRODUCTING CASTINGS.
5/12/1993 - PDF - Spanish -
Learn More€58.00 -
UNE-EN 2076-3:1993 (R2018)
ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS. TECHNICAL SPECIFICATIONS. PART 3: PRE-PRODUCTION AND PRODUCTING CASTINGS.
5/12/1993 - PDF - English -
Learn More€69.60 -
UNE-EN 4881:2023
Aerospace series - Micro-arc oxidation of aluminium and aluminium alloys (Endorsed by Asociación Española de Normalización in December of 2023.)
4/23/2024 - PDF - English -
Learn More€69.00
