49.025.20 : Aluminium
-
€93.00 -
UNE-EN 2512:2014
Aerospace series - Aluminium alloy AL-P7175 - T7351 - Plate - 6mm < a <= 100 mm (Endorsed by AENOR in November of 2014.)
11/1/2014 - PDF - English -
Learn More€38.00 -
BS EN 2512:2014
Aerospace series. Aluminium alloy AL-P7175. T7351. Plate. 6mm < a = 100 mm
10/31/2014 - PDF - English -
Learn More€151.00 -
SAE AMS-QQ-A-200/11A:2014-10-13
Aluminum Alloy 7075, Bar, Rod, Shapes, Tube, and Wire, Extruded (Stabilized: Oct 2014)
10/13/2014 - PDF - English -
Learn More€79.00 -
SAE AMS 4260G:2014-10-01
Aluminum Alloy, Investment Castings 7.0Si - 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated
10/1/2014 - PDF - English -
Learn More€70.00 -
SAE AMS 4257:2019-11-12
Aluminum Alloy, Extrusion 3.7Cu - 1.15Li - 0.5Zn - 0.45Ag - 0.4Mg - 0.3Mn - 0.1Zr (2055-T84) Solution Heat Treated, Stress Relieved by Stretching 2% to 5% and Aged
9/25/2014 - PDF - English -
Learn More€75.00 -
€60.00 -
€66.00 -
SAE AMS-QQ-A-225/9A:2014-07-25
Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes, Rolled, Drawn, or Cold Finished (Stabilized: Jul 2014)
7/25/2014 - PDF - English -
Learn More€70.00 -
€119.00 -
€60.00 -
SAE AIR 6291:2014-07-07
Guidelines for Repair Process Evaluation of Aluminum Bonded Structure
7/7/2014 - PDF - English -
Learn More€149.00 -
DIN EN 4293:2014-07
Aerospace series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D150 mm, German and English version EN 4293:2014
7/1/2014 - PDF - English, German -
Learn More€52.90 -
NBN EN 4293:2014
Aerospace series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D ? 150 mm
6/20/2014 - PDF - German -
Learn More€58.00 -
NBN EN 4293:2014
Aerospace series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D = 150 mm
6/20/2014 - PDF - English -
Learn More€58.00 -
NBN EN 4293:2014
Aerospace series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D ? 150 mm
6/20/2014 - PDF - French -
Learn More€58.00 -
UNE-EN 4293:2014
Aerospce series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D <= 150 mm (Endorsed by AENOR in June of 2014.)
6/1/2014 - PDF - English -
Learn More€38.00 -
BS EN 4293:2014
Aerospace series. Aluminium alloy AL-P7175. T73511. Extruded bar and section. a or D = 150 mm
5/31/2014 - PDF - English -
Learn More€151.00 -
SAE AMS 4280J:2014-05-19
Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.5Mg (355.0-T71) Solution Heat Treated and Overaged
5/19/2014 - PDF - English -
Learn More€70.00 -
SAE AMS 4281G:2014-05-19
Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated
5/19/2014 - PDF - English -
Learn More€70.00 -
SAE AMS-QQ-A-250/3A:2014-03-06
Aluminum Alloy Alclad 2014, Plate and Sheet (Stabilized: Mar 2014)
3/6/2014 - PDF - English -
Learn More€75.00 -
SAE AMS-QQ-A-250/18B:2014-03-06
Aluminum 7075, Plate and Sheet Alclad One Side (Stabilized: Mar 2014)
3/6/2014 - PDF - English -
Learn More€75.00 -
SAE AMS-QQ-A-200/2B:2014-03-04
Aluminum Alloy 2014, Bar, Rod, Shapes, Tube, and Wire, Extruded (Stabilized: Mar 2014)
3/4/2014 - PDF - English -
Learn More€75.00 -
SAE AMS-QQ-A-250/15C:2014-02-14
Aluminum Alloy Alclad 7178, Plate and Sheet (Stabilized: Feb 2014)
2/14/2014 - PDF - English -
Learn More€70.00 -
SAE AMS-QQ-A-250/28C:2014-02-14
Aluminum Alloy, 7011 Alclad 7178 Plate and Sheet (Stabilized: Feb 2014)
2/14/2014 - PDF - English -
Learn More€93.00 -
SAE AMS-QQ-A-250/22C:2014-02-14
Aluminum Alloy, 7178-T76, Alclad Plate and Sheet Improved Exfoliation Resistant (Stabilized: Feb 2014)
2/14/2014 - PDF - English -
Learn More€83.00 -
€66.00
-
SAE AMS-QQ-A-250/21C:2014-02-14
Aluminum Alloy, 7178-T76, Plate and Sheet Improved Exfoliation Resistant (Stabilized: Feb 2014)
2/14/2014 - PDF - English -
Learn More€70.00 -
DIN EN 3983:2014-02
Aerospace series - Aluminium alloy AL-P7050 - T7651 - Plate - 6 mm < a160 mm, German and English version EN 3983:2013
2/1/2014 - PDF - English, German -
Learn More€52.90 -
€66.00
-
BS 5L 100:2011+A1:2013 (R2018)
Procedure for inspection, testing and acceptance of wrought aluminium and aluminium alloys
12/31/2013 - PDF - English -
Learn More€377.00 -
€60.00
-
€70.00
-
€87.00
-
€79.00
-
SAE AMS 4278B:2013-12-04
Aluminum Alloy, Alclad Sheet 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-0) Annealed, Fine Grained
12/4/2013 - PDF - English -
Learn More€70.00 -
SAE AMS 4414:2019-09-19
Aluminum Alloy, Hand Forgings 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged
12/4/2013 - PDF - English -
Learn More€70.00 -
UNE-EN 3983:2013
Aerospace series - Aluminium alloy AL-P7050- - T7651 - Plate - 6 mm < a <= 160 mm (Endorsed by AENOR in November of 2013.)
11/1/2013 - PDF - English -
Learn More€38.00 -
NBN EN 3983:2013
Aerospace series - Aluminium alloy AL-P7050- - T7651 - Plate - 6 mm < a ? 160 mm
10/25/2013 - PDF - German -
Learn More€58.00 -
NBN EN 3983:2013
Aerospace series - Aluminium alloy AL-P7050- - T7651 - Plate - 6 mm < a = 160 mm
10/25/2013 - PDF - English -
Learn More€58.00 -
NBN EN 3983:2013
Aerospace series - Aluminium alloy AL-P7050- - T7651 - Plate - 6 mm < a ? 160 mm
10/25/2013 - PDF - French -
Learn More€58.00 -
BS EN 3983:2013
Aerospace series. Aluminium alloy AL-P7050-. T7651. Plate. 6 mm < a = 160 mm
9/30/2013 - PDF - English -
Learn More€151.00 -
SAE AMS 4295D:2013-09-17
Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr (2219 - O, F, T31, T351, T37, T81, T851, T87) (Stabilized: Sep 2013)
9/17/2013 - PDF - English -
Learn More€79.00 -
SAE AMS-QQ-A-200/15B:2013-07-31
Aluminum Alloy Bar, Rod, and Shapes, Extruded, 7075-T76 Improved Exfoliation Resistance (Stabilized: Jul 2013)
7/31/2013 - PDF - English -
Learn More€66.00 -
SAE AMS 4271A:2013-07-25
Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn, (2024-T861), Solution Heat Treated and Cold Worked, and Artificially Aged (Stabilized: Jul 2013)
7/25/2013 - PDF - English -
Learn More€60.00 -
SAE ARP 1842:2022-06-07
Surface Preparation for Structural Adhesive Bonding Aluminum Alloy and Low Alloy Steel Parts
7/19/2013 - PDF - English -
Learn More€79.00 -
SAE ARP 1524A:2013-07-19
Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding
7/19/2013 - PDF - English -
Learn More€83.00 -
DIN EN 2089:2013-04
Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Sheet and strip - 0,4 mma 6 mm, German and English version EN 2089:2005
4/1/2013 - PDF - English, German -
Learn More€45.98 -
UNE-EN 3354:2013
Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Sheet for superplastic forming - a <= 6 mm (Endorsed by AENOR in March of 2013.)
3/1/2013 - PDF - English -
Learn More€38.00 -
SAE AMS 4016M:2018-09-21
Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-H32) Strain Hardened, Quarter-Hard, and Stabilized
1/3/2013 - PDF - English -
Learn More€60.00 -
WL 3.2384-5:2012-10
Aerospace series - Wrought aluminium alloy with approx. 7 Si - 0,6 Mg - Part 5: Filler metal for welding
10/1/2012 - PDF - English, German -
Learn More€32.34 -
WL 3.4394-2:2012-10
Aerospace series - Wrought aluminium alloy with approx. 6,2 Zn - 2,4 Mg - 1,8 Cu - 0,13 Zr - Part 2: Die forgings
10/1/2012 - PDF - English, German -
Learn More€52.90 -
WL 3.4144-100:2012-10
Aerospace series - Wrought aluminium alloy with approx. 6,2 Zn - 2,3 Cu - 2,2 Mg - 0,12 Zr - Part 100: Stretched plate, die and hand forgings, rivet wire and rivets - Design and production data, conversion
10/1/2012 - PDF - English, German -
Learn More€52.90 -
WL 3.3354-1:2012-10
Aerospace series - Wrought aluminium alloy with approx. 5 Mg - Part 1: Rivet wire and rivets
10/1/2012 - PDF - English, German -
Learn More€32.34 -
WL 3.4394-3:2012-10
Aerospace series - Wrought aluminium alloy with approx. 6,2 Zn - 2,4 Mg - 1,8 Cu - 0,13 Zr - Part 3: Hand forgings
10/1/2012 - PDF - English, German -
Learn More€52.90 -
WL 3.0000 bis 3.4999-10:2012-10
Aerospace series - Aluminium and aluminium alloys - Survey sheet
10/1/2012 - PDF - English, German -
Learn More€22.99 -
WL 3.4377-1:2012-10
Aerospace series - Wrought aluminium alloy with approx. 5,7 Zn - 2,2 Mg - 1,6 Cu - 0,22 Cr - Part 1: Sheet and strip, clad
10/1/2012 - PDF - English, German -
Learn More€45.98 -
WL 3.3354-100:2012-10
Aerospace series - Wrought aluminium alloy with approx. 5 Mg - Part 100: Rivet wire and rivets - Design and production data, conversion
10/1/2012 - PDF - English, German -
Learn More€45.98 -
UNE-EN 3355:2012
Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Extruded section - De <= 150 mm - 900 MPa <= Rm <= 1 160 MPa (Endorsed by AENOR in April of 2012.)
4/1/2012 - PDF - English -
Learn More€38.00 -
BS 5L 101:2011 (R2016)
Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings
12/31/2011 - PDF - English -
Learn More€293.00 -
BS EN 4004:2007
Aerospace series. Aluminium alloy AL-P3103-H16. Sheet and strip. 0,4 mm = a = 6 mm
12/31/2010 - PDF - English -
Learn More€151.00 -
ASD-STAN prEN 2707 (12/31/2010)
Aluminium alloy 7075-T6510 - Bar and section - 1,2 <= (a or D) <= 125 mm - With peripheral coarse grain control
12/31/2010 - PDF - English -
Learn More€7.55 -
ASD-STAN prEN 2697 (12/31/2010)
Aluminium alloy (2214) - Solution treated, water quench and artificially aged (T6) - Extruded bar and section - 1,2 <= (a or D) <= 100 mm with coarse peripheral grain control
12/31/2010 - PDF - English -
Learn More€7.55 -
ASD-STAN prEN 2705 (12/31/2010)
Aluminium alloy 2017A-T42 - Drawn tube for structures - 06 <= a <= 12,5 mm
12/31/2010 - PDF - English -
Learn More€7.55 -
BS EN 2703:2005
Aerospace series. Aluminium alloy AL-P2024-T4 or T42. Clad sheet and strip. 0,3 mm = a = 6 mm
12/31/2010 - PDF - English -
Learn More€151.00 -
ASD-STAN prEN 2710 (12/31/2010)
Aluminium alloy 2014A-T4510 - Bar and section - 1,2 <= (a or D) <= 200 mm - With peripheral coarse grain control
12/31/2010 - PDF - English -
Learn More€7.55 -
BS EN 4007:2005
Aerospace series. Aluminium alloy AL-P6082-T6 or T62. Sheet and strip. 0,4 mm 3L a 3L 6 mm
11/30/2010 - PDF - English -
Learn More€151.00 -
BS EN 2090:2005
Aerospace series. Aluminium alloy AL-P2024-T3. Clad sheet and strip 0,3 mm = a = 6 mm
11/30/2010 - PDF - English -
Learn More€151.00 -
BS EN 4202:2005
Aerospace series. Aluminium alloy AL-P6082-T651. Plate. 6 mm < a = 25 mm
11/30/2010 - PDF - English -
Learn More€151.00 -
UNE-EN 3459:2010
Aerospace series - Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm < a <= 50 mm (Endorsed by AENOR in June of 2010.)
6/1/2010 - PDF - English -
Learn More€35.00 -
BS EN 2117:2009
Aerospace series. Aluminium alloy AL-P5056A (5056A)-H32. Wire for solid rivets. D = 10 mm
9/30/2009 - PDF - English -
Learn More€151.00 -
BS EN 2115:2009
Aerospace series. Aluminium alloy 2117-T42. Wire for solid rivets. D = 10 mm
9/30/2009 - PDF - English -
Learn More€151.00 -
BS EN 3115:2009
Aerospace series. Aluminium alloy 7050-T73. Wire for solid rivets. D = 10 mm
9/30/2009 - PDF - English -
Learn More€151.00 -
BS EN 2116:2009
Aerospace series. Aluminium alloy 2017A-T42. Wire for solid rivets. D = 10 mm
9/30/2009 - PDF - English -
Learn More€151.00 -
DIN EN 2117:2009-08
Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets - D10 mm, German and English version EN 2117:2009
8/1/2009 - PDF - English, German -
Learn More€45.98 -
DIN EN 2115:2009-08
Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D10 mm, German and English version EN 2115:2009
8/1/2009 - PDF - English, German -
Learn More€45.98 -
DIN EN 2116:2009-08
Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D10 mm, German and English version EN 2116:2009
8/1/2009 - PDF - English, German -
Learn More€45.98 -
DIN EN 3115:2009-07
Aerospace series - Aluminium alloy 7050-T73 - Wire for solid rivets - D10 mm, German and English version EN 3115:2009
7/1/2009 - PDF - English, German -
Learn More€45.98 -
NF EN 2116, L10-605 (06/2009)
Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D " or = 10 mm - Série aérospatiale
6/1/2009 - Paper - English, French -
Learn More€68.50 -
NF EN 2115, L10-604 (06/2009)
Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D " or = 10 mm - Série aérospatiale
6/1/2009 - Paper - English, French -
Learn More€68.50 -
NBN EN 3115:2009
Aerospace series - Aluminium alloy 7050-T73 - Wire for solid rivets — D = 10 mm
4/2/2009 - PDF - English -
Learn More€37.00 -
NBN EN 2117:2009
Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets - D = 10 mm
4/2/2009 - PDF - English -
Learn More€37.00 -
NBN EN 2115:2009
Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D = 10 mm
4/2/2009 - PDF - English -
Learn More€37.00 -
NBN EN 2116:2009
Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D ? 10 mm
4/2/2009 - PDF - German -
Learn More€37.00 -
NBN EN 2117:2009
Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets - D ? 10 mm
4/2/2009 - PDF - German -
Learn More€37.00 -
NBN EN 3115:2009
Aerospace series - Aluminium alloy 7050-T73 - Wire for solid rivets ? D ? 10 mm
4/2/2009 - PDF - German -
Learn More€37.00 -
NBN EN 2115:2009
Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D ? 10 mm
4/2/2009 - PDF - German -
Learn More€37.00 -
NBN EN 2116:2009
Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D = 10 mm
4/2/2009 - PDF - English -
Learn More€37.00 -
UNE-EN 3115:2009
Aerospace series - Aluminium alloy 7050-T73 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
UNE-EN 2117:2009
Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
UNE-EN 2115:2009
Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
UNE-EN 2116:2009
Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D <= 10 mm (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English -
Learn More€28.00 -
NF EN 4632-002, L06-380-002 (11/2008)
Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002 : Homogeneous assemblies aluminium and aluminium alloys - Série aérospatiale
11/1/2008 - Paper - English, French -
Learn More€131.00 -
DIN EN 3999:2007-11
Aerospace series - Aluminium alloy AL-P2024-T351 - Sheet and strip with improved chemical milling capability 1,6 mm <= a <= 6 mm; German and English version EN 3999:2007
11/1/2007 - PDF - English, German -
Learn More€85.79 -
DIN EN 4002:2007-11
Aerospace series - Aluminium alloy AL-P2219-T81 - Sheet and strip 0,5 mm <= a <= 6 mm; German and English version EN 4002:2007
11/1/2007 - PDF - English, German -
Learn More€85.79 -
BS EN 4002:2007
Aerospace series. Aluminium alloy AL-P2219-T81. Sheet and strip 0,5 mm = a = 6 mm
9/28/2007 - PDF - English -
Learn More€151.00 -
BS EN 3999:2007
Aerospace series. Aluminium alloy AL-P2024-T351. Sheet and strip with improved chemical milling capability 1,6 mm = a = 6 mm
9/28/2007 - PDF - English -
Learn More€151.00 -
NF EN 4003, L14-165 (09/2007)
Aerospace series - Aluminium alloy AL-P2219 - T87 - Sheet and strip - Sheet and strip 0,5 mm "or = a " or = 6 mm - Série aérospatiale
9/1/2007 - Paper - English, French -
Learn More€53.00 -
NF EN 3998, L14-221 (09/2007)
Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip 0,3 mm " or = a " or = 6 mm - Série aérospatiale
9/1/2007 - Paper - English, French -
Learn More€54.50 -
DIN EN 4005:2007-07
Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm <= a <= 6 mm; German and English version EN 4005:2007
7/1/2007 - PDF - English, German -
Learn More€85.79 -
DIN EN 3998:2007-07
Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip 0,3 mm <= a <= 6 mm; German and English version EN 3998:2007
7/1/2007 - PDF - English, German -
Learn More€85.79 -
DIN EN 4006:2007-07
Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm <= a <= 6 mm; German and English version EN 4006:2007
7/1/2007 - PDF - English, German -
Learn More€85.79 -
DIN EN 4004:2007-07
Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip 0,4 mm <= a <= 6 mm; German and English version EN 4004:2007
7/1/2007 - PDF - English, German -
Learn More€85.79 -
DIN EN 4001:2007-07
Aerospace series - Aluminium alloy AL-P2024-T351 - Clad sheet and strip with improved chemical milling capability 1,6 mm <= a <= 6 mm; German and English version EN 4001:2007
7/1/2007 - PDF - English, German -
Learn More€85.79 -
DIN EN 2085:2007-07
Aerospace series - Aluminium alloy AL-P2618A-T6 - Hand and die forgings - a <= 150 mm; German and English version EN 2085:2004
7/1/2007 - PDF - English, German -
Learn More€85.79 -
UNE-EN 4005:2007
Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm =< a =< 6 mm (Endorsed by AENOR in May of 2007.)
5/1/2007 - PDF - English -
Learn More€35.00 -
UNE-EN 3998:2007
Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip 0,3 mm =< a =< 6 mm (Endorsed by AENOR in May of 2007.)
5/1/2007 - PDF - English -
Learn More€35.00 -
UNE-EN 4006:2007
Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm =< a =< 6 mm (Endorsed by AENOR in May of 2007.)
5/1/2007 - PDF - English -
Learn More€35.00 -
UNE-EN 4004:2007
Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip 0,4 mm =< a =< 6 mm (Endorsed by AENOR in May of 2007.)
5/1/2007 - PDF - English -
Learn More€35.00 -
BS EN 4006:2007
Aerospace series. Aluminium alloy AL-P6082-T4 or T42. Sheet and strip 0,4 mm = a = 6 mm
4/30/2007 - PDF - English -
Learn More€151.00 -
BS EN 4001:2007
Aerospace series. Aluminium alloy AL-P2024-T351. Clad sheet and strip with improved chemical milling capability 1,6 mm = a = 6 mm
4/30/2007 - PDF - English -
Learn More€151.00 -
BS EN 3998:2007
Aerospace series. Aluminium alloy AL-P2024-T4 or T42. Sheet and strip. 0,3 mm = a = 6 mm
4/30/2007 - PDF - English -
Learn More€151.00 -
BS EN 4005:2007
Aerospace series. Aluminium alloy AL-P5052-O. Sheet and strip 0,3 mm = a = 6 mm
4/30/2007 - PDF - English -
Learn More€151.00 -
DIN EN 4003:2007-04
Aerospace series - Aluminium alloy AL-P2219-T87 - Sheet and strip 0,5 mm <= a <= 6 mm; German and English version EN 4003:2006
4/1/2007 - PDF - English, German -
Learn More€92.62 -
DIN EN 3339:2007-04
Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a <= 200 mm; German and English version EN 3339:2006
4/1/2007 - PDF - English, German -
Learn More€79.72 -
BS EN 4003:2006
Aerospace series. Aluminium alloy AL-P2219-T87. Sheet and strip 0,5 mm = a = 6 mm
3/30/2007 - PDF - English -
Learn More€151.00 -
UNE-EN 3339:2006
Aerospace series - Aluminium alloy AL-P7010- - T76 - Die forgings - a <= 200 mm (Endorsed by AENOR in March of 2007.)
3/1/2007 - PDF - English -
Learn More€28.00 -
DIN EN 2072:2007-03
Aerospace series - Aluminium AL-P1050A-H14 - Sheet and strip - 0,4 mm <= a <= 6 mm; German and English version EN 2072:2005
3/1/2007 - PDF - English, German -
Learn More€92.62 -
DIN EN 2632:2007-02
Aerospace series - Aluminium alloy AL-P7075-T73511 - Extruded bar and section - a or D <= 150 mm with peripheral coarse grain control; German and English version EN 2632:2005
2/1/2007 - PDF - English, German -
Learn More€92.62 -
LN 29557-3/A1 Berichtigung 1:2007-02
Aerospace - Laminated shim of wrought aluminium and aluminium alloys - Dimensions, masses, Amendment A1, Corrigenda to LN 29557-3/A1:2002-08
2/1/2007 - PDF - German -
Learn More€0.00 -
DIN EN 2088:2007-02
Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Clad sheet and strip - 0,4 mm <= a <= 6 mm; German and English version EN 2088:2005
2/1/2007 - PDF - English, German -
Learn More€85.79 -
NBN EN 3339:2007
Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a ? 200 mm
1/31/2007 - PDF - German -
Learn More€58.00 -
NBN EN 3339:2007
Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a = 200 mm
1/31/2007 - PDF - English -
Learn More€58.00 -
BS EN 3339:2006
Aerospace series. Aluminium alloy AL-P7010-T76. Die Forgings. a = 200 mm
1/31/2007 - PDF - English -
Learn More€151.00 -
DIN EN 2681:2006-10
Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings - a <= 150 mm; German and English version EN 2681:2004
10/1/2006 - PDF - English, German -
Learn More€85.79 -
DIN EN 2422:2006-10
Aerospace series - Aluminium alloy AL-P2124-T351 - Plate - 25 mm < a <= 120 mm; German and English version EN 2422:2005
10/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 2693:2006-10
Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm <= a <= 6 mm; German and English version EN 2693:2005
10/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 4203:2006-10
Aerospace series - Aluminium alloy AL-P8090-T89 - Sheet - 0,6 mm <= a <= 6 mm; German and English version EN 4203:2005
10/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 3553:2006-10
Aerospace series - Aluminium alloy AL-P2618A-T6511 - Extruded bar and section - a or D <= 160 mm; German and English version EN 3553:2004
10/1/2006 - PDF - English, German -
Learn More€85.79 -
DIN EN 2092:2006-10
Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm <= a <= 6 mm; German and English version EN 2092:2005
10/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 2696:2006-10
Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm <= a <= 6 mm; German and English version EN 2696:2005
10/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 2684:2006-10
Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate - 6 mm < a <= 140 mm; German and English version EN 2684:2004
10/1/2006 - PDF - English, German -
Learn More€85.79 -
DIN EN 2703:2006-10
Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm <= a <= 6 mm; German and English version EN 2703:2005
10/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 2694:2006-10
Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm <= a <= 6 mm; German and English version EN 2694:2005
10/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 4286:2006-10
Aerospace series - Aluminium alloy AL-P8090-T89 - Die forgings - a <= 125 mm; German and English version EN 4286:2005
10/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 2086:2006-10
Aerospace series - Aluminium alloy AL-P2618A-T851 - Hand and die forgings - a <= 150 mm; German and English version EN 2086:2004
10/1/2006 - PDF - English, German -
Learn More€85.79 -
DIN EN 2256:2006-10
Aerospace series - Aluminium alloy AL-P2618A-T852 - Hand and die forgings - a <= 150 mm; German and English version EN 2256:2004
10/1/2006 - PDF - English, German -
Learn More€85.79 -
DIN EN 2395:2006-10
Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm <= a <= 6 mm; German and English version EN 2395:2005
10/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 2687:2006-10
Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate - 6 mm < a <= 160 mm; German and English version EN 2687:2004
10/1/2006 - PDF - English, German -
Learn More€85.79 -
DIN EN 3552:2006-10
Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm <= a <= 6 mm; German and English version EN 3552:2005
10/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 2695:2006-10
Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip - 0,3 mm <= a <= 6 mm; German and English version EN 2695:2005
10/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 4291:2006-10
Aerospace series - Aluminium alloy AL-P8090 - Forging stock; German and English version EN 4291:2005
10/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 4287:2006-08
Aerospace series - Aluminium alloy AL-P7010 - Forging stock; German and English version EN 4287:2005
8/1/2006 - PDF - English, German -
Learn More€92.62 -
DIN EN 4292:2006-07
Aerospace series - Aluminium alloy AL-R39002 - Forging stock; German and English version EN 4292:2005
7/1/2006 - PDF - English, German -
Learn More€59.63 -
DIN EN 3979:2006-07
Aerospace series - Aluminium alloy AL-P8090-O2 - Sheet for superplastic forming (SPF) - 0,8 mm <= a <= 6 mm; German and English version EN 3979:2005
7/1/2006 - PDF - English, German -
Learn More€59.63 -
DIN EN 4102:2006-06
Aerospace series - Aluminium alloy AL-P2219-T81 - Clad sheet and strip - 0,5 mm <= a <= 6 mm; German and English version EN 4102:2005
6/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 4450:2006-06
Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet - 0,8 mm <= a <= 6 mm; German and English version EN 4450:2005
6/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 3333:2006-06
Aerospace series - Aluminium alloy AL-P7475-T762 - Sheet and strip - 0,6 mm <= a <= 6 mm; German and English version EN 3333:2005
6/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 4100:2006-06
Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Sheet and strip - 0,5 mm <= a <= 6 mm; German and English version EN 4100:2005
6/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 4283:2006-06
Aerospace series - Aluminium alloy AL-P2219-T87 - Plate - 6 mm < a <= 40 mm; German and English version EN 4283:2005
6/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 2511:2006-06
Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm < a <= 100 mm; German and English version EN 2511:2005
6/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 3474:2006-06
Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm <= a <= 6 mm; German and English version EN 3474:2005
6/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 4204:2006-06
Aerospace series - Aluminium alloy AL-P8090-T841 - Sheet - 0,6 mm <= a <= 6 mm; German and English version EN 4204:2005
6/1/2006 - PDF - English, German -
Learn More€85.79 -
DIN EN 2090:2006-06
Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip 0,3 mm <= a <= 6 mm; German and English version EN 2090:2005
6/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 3335:2006-06
Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0,8 mm <= a <= 6 mm; German and English version EN 3335:2005
6/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 4101:2006-06
Aerospace series - Aluminium alloy AL-P2024-T4 - Sheet and strip with improved stretch forming capability - 0,4 mm <= a <= 6 mm; German and English version EN 4101:2005
6/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 3332:2006-06
Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm <= a <= 6 mm; German and English version EN 3332:2005
6/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 4007:2006-06
Aerospace series - Aluminium alloy AL-P6082-T6 or T62 - Sheet and strip - 0,4 mm <= a <= 6 mm; German and English version EN 4007:2005
6/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 4247:2006-06
Aerospace series - Aluminium alloy AL-P2024-T42 - Plate - 6 mm < a <= 140 mm; German and English version EN 4247:2005
6/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 4449:2006-06
Aerospace series - Aluminium alloy AL-P7050-T76 - Sheet - 0,8 mm <= a <= 6 mm; German and English version EN 4449:2005
6/1/2006 - PDF - English, German -
Learn More€85.79 -
DIN EN 3341:2006-06
Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm <= a <= 6 mm; German and English version EN 3341:2005
6/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 4313:2006-05
Aerospace series - Aluminium alloy AL-P6013-T6 - Sheet and strip - 0,5 mm <= a <= 6 mm; German and English version EN 4313:2005
5/1/2006 - PDF - English, German -
Learn More€79.72 -
DIN EN 2702:2006-04
Aerospace series - Aluminium alloy AL-P6061 - T6 or T62 - Drawn or extruded bar and section - a or D <= 200 mm; German and English version EN 2702:2005
4/1/2006 - PDF - English, German -
Learn More€59.63 -
DIN EN 3344:2006-04
Aerospace series - Aluminium alloy AL-P7050-T76511 - Extruded bar and section - a or D <= 150 mm with peripheral coarse grain control; German and English version EN 3344:2005
4/1/2006 - PDF - English, German -
Learn More€85.79 -
DIN EN 3338:2006-04
Aerospace series - Aluminium alloy AL-P7050-T74511 - Extruded bar and section - a or D <= 150 mm with peripheral coarse grain control; German and English version EN 3338:2005
4/1/2006 - PDF - English, German -
Learn More€59.63 -
DIN EN 3347:2006-04
Aerospace series - Aluminium alloy AL-P2024-T8511 - Extruded bar and section - a or D <= 150 mm with peripheral coarse grain control; German and English version EN 3347:2005
4/1/2006 - PDF - English, German -
Learn More€85.79 -
DIN EN 3342:2006-04
Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Drawn or extruded bar and section - a or D <= 150 mm; German and English version EN 3342:2005
4/1/2006 - PDF - English, German -
Learn More€59.63 -
UNE-EN 2702:2005
Aerospace series - Aluminium alloy AL-P6061 - T6 or T62 - Drawn or extruded bar and section - a or D =<200 mm (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 2635:2005
Aerospace series - Aluminium alloy AL-P2014A - T6511 - Extruded bar and section - a or D =<200 mm with peripheral coarse grain control (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 3344:2005
Aerospace series - Aluminium alloy AL-P7050 - T76511 - Extruded bar and section - a or D =< 150 mm with peripheral coarse grain control (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
DIN EN 2087:2006-03
Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet and strip - 0,4 mm <= a <= 6 mm; German and English version EN 2087:2005
3/1/2006 - PDF - English, German -
Learn More€85.79 -
UNE-EN 3338:2005
Aerospace series - Aluminium alloy AL-P7050 - T74511 - Extruded bar and section - a or D =< 150 mm with peripheral coarse grain control (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 2632:2005
Aerospace series - Aluminium alloy AL-P7075 - T73511 - Extruded bar and section - a or D =<150 mm with peripheral coarse grain control (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 3347:2005
Aerospace series - Aluminium alloy AL-P2024 - T8511 - Extruded bar and section - a or D =<150 mm with peripheral coarse grain control (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
DIN EN 2635:2006-03
Aerospace series - Aluminium alloy AL-P2014A-T6511 - Extruded bar and section - a or D <= 200 mm with peripheral coarse grain control; German and English version EN 2635:2005
3/1/2006 - PDF - English, German -
Learn More€85.79 -
NF EN 2632, L14-211 (03/2006)
Aerospace series - Aluminium alloy AL-P7075 - -T73511 - Extruded bar and sections - a or D " or = 150 mm with peripheral coarse grain control - Série aérospatiale
3/1/2006 - Paper - English, French -
Learn More€54.50 -
UNE-EN 3342:2005
Aerospace series - Aluminium alloy AL-P6061 - T4 or T42 - Drawn or extruded bar and section - a or D =< 150 mm (Endorsed by AENOR in March of 2006.)
3/1/2006 - PDF - English -
Learn More€35.00 -
DIN EN 2486:2006-03
Aerospace series - Aluminium alloy AL-P2618A - Forging stock; German and English version EN 2486:2005
3/1/2006 - PDF - English, German -
Learn More€85.79 -
UNE-EN 2072:2005
Aerospace series - Aluminium AL-P1050A - H14 - Sheet and strip - 0,4 mm = 2/1/2006 - PDF - English -
Learn More€35.00 -
UNE-EN 2087:2005
Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet and strip - 0,4 mm = 2/1/2006 - PDF - English -
Learn More€35.00 -
€151.00 -
BS EN 4204:2005
Aerospace series. Aluminium alloy AL-P8090. T841. Sheet. 0,6 mm = a = 6 mm
12/13/2005 - PDF - English -
Learn More€151.00 -
BS EN 4203:2005
Aerospace series. Aluminium alloy AL-P8090-T89. Sheet. 0,6 mm = a = 6 mm
12/7/2005 - PDF - English -
Learn More€151.00 -
BS EN 3979:2005
Aerospace series. Aluminium alloy AL-P8090-O2. Sheet for superplastic forming (SPF). 0,8 mm = a = 6 mm
12/7/2005 - PDF - English -
Learn More€151.00 -
BS EN 3332:2005
Aerospace series. Aluminium alloy AL-P7475-T762. Clad sheet and strip. 1,0 mm = a = 6 mm
12/7/2005 - PDF - English -
Learn More€151.00 -
BS EN 2072:2005
Aerospace series. Aluminium AL-P1050A. H14. Sheet and strip. 0,4 mm = a = 6 mm
12/7/2005 - PDF - English -
Learn More€151.00 -
BS EN 2632:2005
Aerospace series. Aluminim alloy AL-P7075. T73511. Extruded bar and section. a or D = 150 mm with peripheral coarse grain control
12/7/2005 - PDF - English -
Learn More€151.00 -
BS EN 4283:2005
Aerospace series. Aluminium alloy AL-P2219-T87. Plate. 6 mm < a = 40 mm
12/7/2005 - PDF - English -
Learn More€151.00 -
NBN EN 2072:2006
Aerospace series - Aluminium AL-P1050A - H14 - Sheet and strip - 0,4 mm
Learn More€58.00 -
NBN EN 3347:2006
Aerospace series - Aluminium alloy AL-P2024 - T8511 - Extruded bar and section - a or D
Learn More€58.00 -
NBN EN 3342:2006
Aerospace series - Aluminium alloy AL-P6061 - T4 or T42 - Drawn or extruded bar and section - a or D
Learn More€58.00 -
NBN EN 2635:2006
Aerospace series - Aluminium alloy AL-P2014A - T6511 - Extruded bar and section - a or D
Learn More€58.00 -
NBN EN 3338:2006
Aerospace series - Aluminium alloy AL-P7050 - T74511 - Extruded bar and section - a or D
Learn More€58.00 -
NBN EN 2702:2006
Aerospace series - Aluminium alloy AL-P6061 - T6 or T62 - Drawn or extruded bar and section - a or D
Learn More€58.00 -
NBN EN 2632:2006
Aerospace series - Aluminium alloy AL-P7075 - T73511 - Extruded bar and section - a or D
Learn More€58.00 -
NBN EN 3344:2006
Aerospace series - Aluminium alloy AL-P7050 - T76511 - Extruded bar and section - a or D
Learn More€58.00 -
NBN EN 2087:2006
Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet and strip - 0,4 mm
Learn More€58.00 -
NBN EN 2072:2006
Aerospace series - Aluminium AL-P1050A - H14 - Sheet and strip - 0,4 mm
Learn More€58.00 -
NBN EN 3347:2006
Aerospace series - Aluminium alloy AL-P2024 - T8511 - Extruded bar and section - a or D
Learn More€58.00 -
NBN EN 3338:2006
Aerospace series - Aluminium alloy AL-P7050 - T74511 - Extruded bar and section - a or D
Learn More€58.00
