49.025.20 : Aluminium
-
UNE-EN 4881:2023
Aerospace series - Micro-arc oxidation of aluminium and aluminium alloys (Endorsed by Asociación Española de Normalización in December of 2023.)
4/23/2024 - PDF - English -
Learn More€69.00 -
NBN 381-21:1955
Aéronautique - Alliages d'aluminium pour construction aéronautique - Alliages pour rivets |Luchtvaart - Aluminium legeringen voor luchtvaartbouw - Legeringen voor klinknagels
8/13/1956 - PDF - French, Dutch -
Learn More€37.00 -
€48.00
-
BS 2L 93:1971 (R2013)
Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
8/31/1971 - PDF - English -
Learn More€151.00 -
BS 3L 63:1971
Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
8/31/1971 - PDF - English -
Learn More€151.00 -
BS L 105:1971
Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
8/31/1971 - PDF - English -
Learn More€151.00 -
BS L 102:1971
Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
8/31/1971 - PDF - English -
Learn More€151.00 -
BS 2L 95:1971
Specification for plate of aluminium-zinc-magnesium-copper-chromium alloy (solution treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)
8/31/1971 - PDF - English -
Learn More€151.00 -
BS 2L 77:1971
Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
8/31/1971 - PDF - English -
Learn More€151.00 -
BS L 112:1971 (R2014)
Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
9/30/1971 - PDF - English -
Learn More€151.00 -
BS L 111:1971 (R2016)
Specification for bars and extruded sections of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
9/30/1971 - PDF - English -
Learn More€151.00 -
BS 2L 99:1972
Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and precipitation treated) (Si 7, Mg 0.3)
3/30/1972 - PDF - English -
Learn More€151.00 -
€60.67
-
€25.67
-
€25.67
-
€25.67
-
€25.67
-
€25.67
-
€25.67
-
NF L15-611 (04/1973) (R2008)
Drawn tubes of circular section in aluminium alloys. Common tolerances.
4/1/1973 - Paper - French -
Learn More€34.67 -
€25.67
-
NF L15-512 (04/1973) (R2008)
Extruded angles, equal and unequal legs, in aluminium alloys.
4/1/1973 - Paper - French -
Learn More€25.67 -
NF L15-612 (04/1973) (R2008)
Drawn tubes of circular section in aluminium alloys. Precision tubes.
4/1/1973 - Paper - French -
Learn More€34.67 -
€25.67
-
€25.67
-
€34.67
-
€34.67
-
€48.00
-
€25.67
-
€25.67
-
€57.29
-
€22.99
-
€22.99
-
€22.99
-
€22.99
-
NF L21-106 (01/1975)
Wires for rivets in aluminium alloys, steel, stainless and heat resisting alloys. Dimensions.
1/1/1975 - Paper - French -
Learn More€25.67 -
LN 65626:1975-04
Hollow sections, rectangular, of aluminium, for workshop facilities, dimensions, masses
4/1/1975 - PDF - German -
Learn More€57.29 -
BS L 119:1975
Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2, Sb 0.2)
9/30/1975 - PDF - English -
Learn More€151.00 -
€15.10
-
ASD-STAN prEN 2057 (12/01/1976)
Z-section aluminium alloy folded profiles with one lipped flange - Dimensions
1/12/1976 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2055 (12/01/1976)
U-section aluminium alloy folded profiles with internally lipped flanges - Dimensions
1/12/1976 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2060 (12/01/1976)
Bowler hat section aluminium alloy folded profiles - Dimensions
1/12/1976 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2052 (12/01/1976)
L-section aluminium alloy folded profiles with internally lipped flanges - Dimensions
1/12/1976 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2058 (12/01/1976)
Z-section aluminium alloy folded profiles with lipped flanges - Dimensions
1/12/1976 - PDF - English -
Learn More€15.10 -
€15.10
-
ASD-STAN prEN 2061 (12/01/1976)
Top hat section - aluminium alloy folded profiles with lipped flanges - Dimensions
1/12/1976 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2054 (12/01/1976)
U-section aluminium alloy folded profiles with externally lipped flanges - Dimensions
1/12/1976 - PDF - English -
Learn More€15.10 -
€15.10
-
BS L 160:1976 (R2016)
Specification. Bars and extruded sections of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
5/28/1976 - PDF - English -
Learn More€151.00 -
ASD-STAN prEN 2125 (08/01/1977)
Aluminium Alloy AL-P16 - T6151 - Plates 6 mm < a <= 120 mm - Aerospace Series
1/8/1977 - PDF - English -
Learn More€15.10 -
BS L 154:1977
Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu 4, Si 1)
1/31/1977 - PDF - English -
Learn More€151.00 -
BS L 155:1977
Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and artificially aged) (Cu 4, Si 1)
1/31/1977 - PDF - English -
Learn More€151.00 -
€25.00
-
ASD-STAN prEN 2065 (01/01/1978)
Folded Profiles Aluminium Alloys - General Tolerances - Aerospace Series
1/1/1978 - PDF - English -
Learn More€30.19 -
€34.67
-
€25.67
-
BS L 168:1978 (R2014)
Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
12/29/1978 - PDF - English -
Learn More€151.00 -
ASD-STAN prEN 2323 (10/01/1980)
ALUMINIUM ALLOY 2014A-T651 - BARS a <= 200 mm - AEROSPACE SERIES
1/10/1980 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2315 (10/01/1980)
ALUMINIUM ALLOY 7075-T73510 or T73511 - BARS AND SECTIONS a <= 100 mm - AEROSPACE SERIES
1/10/1980 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2324 (10/01/1980)
ALUMINIUM ALLOY 2014A-T6 - BARS AND SECTIONS a <= 150 mm - AEROSPACE SERIES
1/10/1980 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2321 (10/01/1980)
ALUMINIUM ALLOY 2024-T3 - BARS AND SECTIONS a <= 150 mm - AEROSPACE SERIES
1/10/1980 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2316 (10/01/1980)
ALUMINIUM ALLOY 7075-T73 - BARS AND SECTIONS a <= 100 mm - AEROSPACE SERIES
1/10/1980 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2325 (10/01/1980)
ALUMINIUM ALLOY 2014A-T6 - BARS a <= 100 mm - AEROSPACE SERIES
1/10/1980 - PDF - English -
Learn More€15.10 -
WL 3.1924 Beiblatt 1:1980-09
Aluminium wrought alloy with about 2.3Cu-1.5Mg-1.1Ni-1.1Fe-0.2Si, plates, rods, drop forgings and smith hammer forgings
9/1/1980 - PDF - German -
Learn More€52.90 -
ASD-STAN prEN 2388 (09/01/1981)
ALUMINIUM ALLOY 2024- T351 - TUBES FOR STRUCTURES 0,6 mm <= a <=12,5 mm - AEROSPACE SERIES
1/9/1981 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2391 (09/01/1981)
ALUMINIUM ALLOY 6061-T4 - TUBES FOR STRUCTURES 0,6 mm <= a <=12,5 mm - AEROSPACE SERIES
1/9/1981 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2488 (09/01/1981)
Aluminium Alloy 7075-F - Cast Or Extruded Forging Stocks - Aerospace Series
1/9/1981 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2389 (09/01/1981)
ALUMINIUM ALLOY 6082-T4 - TUBES FOR STRUCTURES 0,6 mm <= a <=12,5 mm - AEROSPACE SERIES
1/9/1981 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2392 (09/01/1981)
ALUMINIUM ALLOY 6061-T6 - TUBES FOR STRUCTURES 0,6 mm <= a <=12,5 mm - AEROSPACE SERIES
1/9/1981 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2390 (09/01/1981)
ALUMINIUM ALLOY 6082-T6 - TUBES FOR STRUCTURES 0,6 mm <= a <=12,5 mm - AEROSPACE SERIES
1/9/1981 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2510 (06/01/1982)
Aluminium alloy 2024-T42 - Drawn tubes for structural applications
1/6/1982 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2508 (06/01/1982)
Aluminium alloy 5086-H111 - drawn tubes for structural applications
1/6/1982 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2380 (09/01/1983)
Aluminium alloy 7075-T73 - Forgings a <= 125 mm - Aerospace series
1/9/1983 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2394 (09/01/1983)
Aluminium alloy 7075-T6511 - Bars and sections a <= 125 mm - Aerospace series
1/9/1983 - PDF - English -
Learn More€15.10 -
WL 3.1854 Beiblatt 1:1983-06
Aluminium cast alloy with about 4.5Cu-0.2Mg-0.2Ti, sand casting and chill casting
6/1/1983 - PDF - German -
Learn More€22.99 -
WL 3.3524 Beiblatt 1:1983-06
Aluminium wrought alloy with about 2.5Mg-0.25Cr, sheets, strips and conduit pipes
6/1/1983 - PDF - German -
Learn More€39.35 -
€22.99
-
WL 3.2134 Beiblatt 1:1983-06
Aluminium cast alloy with about 5Si-1.3Cu-0.5Mg, sand casting and chill casting
6/1/1983 - PDF - German -
Learn More€22.99 -
WL 3.1354 und WL 3.1364 Beiblatt 1:1983-06
Aluminium wrought alloy with about 4.5Cu-1.5Mg-0.6Mn, unclad and clad, sheets, plates, rods, pressed sections and pipes
6/1/1983 - PDF - German -
Learn More€52.90 -
€22.99
-
WL 3.4374-2:1983-06
Aluminium wrought alloy with about 6Zn-2.5Mg-1.5Cu, key sheets, clad
6/1/1983 - PDF - German -
Learn More€22.99 -
WL 3.1854:1983-06
Aluminium cast alloy with about 4.5Cu-0.2Mg-0.2Ti, sand casting and chill casting
6/1/1983 - PDF - German -
Learn More€22.99 -
WL 3.3524-1:1983-06
Aluminium wrought alloy with about 2.5Mg-0.25Cr, sheets and strips
6/1/1983 - PDF - German -
Learn More€22.99 -
€22.99
-
€22.99
-
ASD-STAN prEN 2685 (08/01/1984)
Aluminium alloy 7010-T7652 - Forgings - 80 <= a <= 160 mm - Aerospace series
1/8/1984 - PDF - English -
Learn More€15.10 -
LN 65613:1984-03
Aerospace, hollow sections, square, of wrought aluminium alloys, for workshop facilities, dimensions, masses
3/1/1984 - PDF - German -
Learn More€97.01 -
DIN 9430-2:1984-12
Aerospace; sampling of semi-finished products in light metals; wrought aluminium alloys
12/1/1984 - PDF - German -
Learn More€45.98 -
LN 9712:1984-12
Double-T-sections of wrought aluminium and magnesium alloys, pressed; dimensions
12/1/1984 - PDF - German -
Learn More€57.29 -
DIN 9430-1:1984-12
Aerospace; sampling of semi-finished products in light metals; wrought aluminium alloys, titanium and titanium alloys; general
12/1/1984 - PDF - German -
Learn More€45.98 -
ASD-STAN prEN 2692 (05/01/1985)
Aluminium alloy 2017A-T3 - clad sheet and strip - 0,4 <= a <= 6 mm
1/5/1985 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2393 (05/01/1985)
Aluminium alloy 2017A-T4 - drawn tube for structures - 0,6 <= a <= 12,5 mm
1/5/1985 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2709 (05/01/1985)
Aluminium alloy 2024-T3510 - Bar and section - 1,2 <= (a or D) <= 150 mm - With peripheral coarse grain control
1/5/1985 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2655 (05/01/1985)
Aluminium alloy 2017A-T42 - extruded bar and section - 1,2 <= (a or D) <=150 mm - with peripheral coarse grain control
1/5/1985 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2631 (05/01/1985)
Aluminium alloy 7075-T6511 - Bar and section - 1,2 <= (a or D) <= 125 mm - With peripheral coarse grain control
1/5/1985 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2640 (05/01/1985)
Aluminium alloy 2017A-T4 - Extruded bar and section - 1,2 <= (a or d) <= 150 mm - With peripheral coarse grain control
1/5/1985 - PDF - English -
Learn More€15.10 -
€15.10
-
ASD-STAN prEN 2091 (05/01/1985)
Aluminium alloy 2024-T4 - Clad sheet and strip - 0,4 <= a <= 6 mm
1/5/1985 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2708 (05/01/1985)
Aluminium alloy 7075-T73510 - Bar and section - 1,2 <= (a or D) <= 100 mm - With peripheral coarse grain control
1/5/1985 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2634 (05/01/1985)
Aluminium alloy 2014A-T4511 - Bar and section - 1,2 <= (a or D) <= 200 mm - With peripheral coarse grain control
1/5/1985 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2706 (05/01/1985)
Aluminium alloy 7009-T736510 - Bar and section - 1,2 <= (a or D) <= 125 mm - With peripheral coarse grain control
1/5/1985 - PDF - English -
Learn More€15.10 -
€15.10
-
€57.29
-
BS 6L 16:1985 (R2016)
Specification for sheet and strip of 99% aluminium (temper designation H14 or H24)
12/31/1985 - PDF - English -
Learn More€151.00 -
BS 5L 34:1985
Specification for forging stock, bars, extruded sections and forgings of 99% aluminium
12/31/1985 - PDF - English -
Learn More€151.00 -
BS 3L 80:1985
Specification for sheet and strip of aluminium-2¼% magnesium alloy (temper designation-O)
12/31/1985 - PDF - English -
Learn More€151.00 -
BS 5L 36:1985
Specification for wire for solid, cold-forged rivets of 99.5% aluminium (not exceeding 10 mm diameter)
12/31/1985 - PDF - English -
Learn More€151.00 -
BS 6L 17:1985
Specification for sheet and strip of 99% aluminium (temper designation-O)
12/31/1985 - PDF - English -
Learn More€151.00 -
BS 3L 81:1985
Specification for sheet and strip of aluminium-2¼% magnesium alloy (temper designation H16 or H26)
12/31/1985 - PDF - English -
Learn More€151.00 -
ASD-STAN prEN 2637 (22/04/1986)
Aluminium alloy 7075-T73 - Extruded bar and section - 1,2 <= (a or D) <= 100 mm - with coarse peripheral grain control
4/22/1986 - PDF - English -
Learn More€15.10 -
€15.10
-
€15.10
-
€15.10
-
€15.10
-
ASD-STAN prEN 2806:1986
Aluminium alloy 2024-T42 - Extruded section - 1,2 <= a <= 100 mm - With coarse peripheral grain control
4/22/1986 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2615 (22/04/1986)
Wire to close tolerance in aluminium and aluminium alloys - 1,6 <= D <= 9,6 mm - Dimensions
4/22/1986 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2638:1986
Aluminium alloy 2024-T3 - Extruded bar and section - 1,2 <= (a or D) <= 150 mm - with coarse peripheral grain control
4/22/1986 - PDF - English -
Learn More€15.10 -
€15.10
-
€15.10
-
ASD-STAN prEN 2807 (04/22/1986)
Aluminium alloy 7020-T6 - Extruded section - 1,2 <= a <= 100 mm - With coarse peripheral grain control
4/22/1986 - PDF - English -
Learn More€15.10 -
€15.10
-
ASD-STAN prEN 2639 (04/22/1986)
Aluminium alloy 2014A-T6 - Extruded bar and section - 1,2 <= (a or D) <= 150 mm - with coarse peripheral grain control
4/22/1986 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2616 (05/15/1986)
Wire for rivets in aluminium and aluminium alloys, large tolerances - D <= 10 mm - Dimensions
5/15/1986 - PDF - English -
Learn More€15.10 -
DIN 65166:1986-09
Aerospace; wrought aluminium alloy wedge; technical specifications
9/1/1986 - PDF - German -
Learn More€45.98 -
LN 1795:1986-12
Aerospace; structural tubes in wrought aluminium alloys, seamless drawn; dimensions, masses
12/1/1986 - PDF - English, German -
Learn More€112.62 -
LN 9410:1986-12
Aerospace; wrought aluminium alloy wedge sections, extruded; dimensions, masses
12/1/1986 - PDF - English, German -
Learn More€97.01 -
DIN 65207:1987-11
Aerospace; tolerances for wrougth aluminium alloy folded profiles (sections)
11/1/1987 - PDF - English, German -
Learn More€45.98 -
WL 3.1364-100:1987-12
Aerospace; wrought aluminium alloy with approx. 4,4Cu-1,5Mg-0,6Mn; clad sheet, strip and plate, sheet and strip sections and wedges; design and production data, conversion
12/1/1987 - PDF - English, German -
Learn More€22.99 -
WL 3.2384-100:1987-12
Aerospace; cast aluminium alloy with approx. 7Si-0,6Mg; sand casting, special sand casting and investment casting; design and production data, conversion
12/1/1987 - PDF - English, German -
Learn More€52.90 -
WL 3.1324-100:1987-12
Aerospace; wrought aluminium alloy with approx. 4,0Cu-0,7Mg; rivet wire and rivets; design and production data, conversion
12/1/1987 - PDF - English, German -
Learn More€39.35 -
WL 3.1364-2:1987-12
Aerospace; wrought aluminium alloy with approx. 4,4Cu-1,5Mg-0,6Mn; clad sheet and strip sections
12/1/1987 - PDF - English, German -
Learn More€22.99 -
WL 3.2384-1:1987-12
Aerospace; cast aluminium alloy with approx. 7Si-0,6Mg; sand casting
12/1/1987 - PDF - English, German -
Learn More€22.99 -
WL 3.1124-100:1987-12
Aerospace; wrought aluminium alloy with approx. 2,6Cu-0,4Mg; rivet wire and rivets; design and production data, conversion
12/1/1987 - PDF - English, German -
Learn More€32.34 -
WL 3.1354-3:1987-12
Aerospace; wrought aluminium alloy with approx. 4,4Cu-1,5Mg-0,6Mn; extruded sections
12/1/1987 - PDF - English, German -
Learn More€22.99 -
€22.99
-
€22.99
-
WL 3.1354-1:1987-12
Aerospace; wrought aluminium alloy with approx. 4,4Cu-1,5Mg-0,6Mn; sheet and plate
12/1/1987 - PDF - English, German -
Learn More€39.35 -
WL 3.1364-3:1987-12
Aerospace; wrought aluminium alloy with approx. 4,4Cu-1,5Mg-0,6Mn; clad wedges
12/1/1987 - PDF - English, German -
Learn More€22.99 -
WL 3.2384-2:1987-12
Aerospace; cast aluminium alloy with approx. 7Si-0,6Mg; special sand casting
12/1/1987 - PDF - English, German -
Learn More€22.99 -
WL 3.1324-1:1987-12
Aerospace; wrought aluminium alloy with approx. 4,0Cu-0,7Mg; rivet wire and rivets
12/1/1987 - PDF - English, German -
Learn More€22.99 -
WL 3.1364-1:1987-12
Aerospace; wrought aluminium alloy with approx. 4,4Cu-1,5Mg-0,6Mn; clad sheet, strip and plate
12/1/1987 - PDF - English, German -
Learn More€32.34 -
€22.99
-
WL 3.1124-1:1987-12
Aerospace; wrought aluminium alloy with approx. 2,6Cu-0,4Mg; rivet wire and rivets
12/1/1987 - PDF - English, German -
Learn More€22.99 -
WL 3.1354-2:1987-12
Aerospace; wrought aluminium alloy with approx. 4,4Cu-1,5Mg-0,6Mn; bars
12/1/1987 - PDF - English, German -
Learn More€32.34 -
WL 3.4144-2:1988-01
Aerospace; wrought aluminium alloy with approx. 6,2Zn-2,3Cu-2,2Mg-0,12Zr, die forgings
1/1/1988 - PDF - English, German -
Learn More€32.34 -
WL 3.4384-100:1988-01
Aerospace; wrought aluminium alloy with approx. 5,7Zn-2,2Mg-1,6Cu-0,22Cr; stretched plate; design and production data, conversion
1/1/1988 - PDF - English, German -
Learn More€45.98 -
WL 3.3214-6:1988-01
Aerospace; wrought aluminium alloy with approx. 1,0Mg-0,6Si-0,3Cu-0,20Cr; structural tubes
1/1/1988 - PDF - English, German -
Learn More€22.99 -
WL 3.4377-100:1988-01
Aerospace; wrought aluminium alloy with approx. 5,7Zn-2,2Mg-1,6Cu-0,22Cr, clad sheet and strip; design and production data, conversion
1/1/1988 - PDF - English, German -
Learn More€52.90 -
WL 3.3214-1:1988-01
Aerospace; wrought aluminium alloy with approx. 1,0Mg-0,6Si-0,3Cu-0,20Cr; sheet and plate
1/1/1988 - PDF - English, German -
Learn More€32.34 -
WL 3.4144-3:1988-01
Aerospace; wrought aluminium alloy with approx. 6,2Zn-2,3Cu-2,2Mg-0,12Zr, hand forgings
1/1/1988 - PDF - English, German -
Learn More€32.34 -
WL 3.4394-1:1988-01
Aerospace; wrought aluminium alloy with approx. 6,2Zn-2,4Mg-1,8Cu-0,13Zr; stretched plate
1/1/1988 - PDF - English, German -
Learn More€22.99 -
WL 3.4144-1:1988-01
Aerospace; wrought aluminium alloy with approx. 6,2Zn-2,3Cu-2,2Mg-0,12Zr, stretched plate
1/1/1988 - PDF - English, German -
Learn More€22.99 -
WL 3.4384-1:1988-01
Aerospace; wrought aluminium alloy with approx. 5,7Zn-2,2Mg-1,6Cu-0,22Cr, stretched plate
1/1/1988 - PDF - English, German -
Learn More€22.99 -
WL 3.3214-5:1988-01
Aerospace; wrought aluminium alloy with approx. 1,0Mg-0,6Si-0,3Cu-0,20Cr; internal pressure tubes
1/1/1988 - PDF - English, German -
Learn More€22.99 -
WL 3.4374-1:1988-01
Aerospace; wrought aluminium allloy with approx. 5,6Zn-2,5Mg-1,6Cu-0,23Cr; clad sheet
1/1/1988 - PDF - English, German -
Learn More€22.99 -
WL 3.4394-100:1988-01
Aerospace; wrought aluminium alloy with approx. 6,2Zn-2,4Mg-1,8Cu-0,13Zr; stretched plate, die and hand forgings; design and production data, conversion
1/1/1988 - PDF - English, German -
Learn More€52.90 -
ASD-STAN prEN 2701 (03/31/1988)
Aluminium alloy (2024) - Solution treated, water quench, cold worked and naturally aged (T3) - Drawn tube for structures - 0,6 <= a <=12,5 mm
3/31/1988 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2699:1988
Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 <= D <= 50 mm
3/31/1988 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2691 (03/31/1988)
Aluminium alloy (2017A) - Solution treated, water quench, cold worked and naturally aged (T3) - Sheet and strip - 0,4 <= a <= 6 mm
3/31/1988 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2700 (03/31/1988)
Aluminium alloy (6061) - Solution treated, water quench and artificially aged (T6) - Drawn bar - 6 <= d <= 75 mm - with coarse peripheral grain control
3/31/1988 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 2698 (03/31/1988)
Aluminium alloy (7075) - Solution treated, water quench, controlled stretched and artificially aged (T6510) - Extruded bar and section - 1,2 <= (a or D) <= 100 mm
3/31/1988 - PDF - English -
Learn More€15.10 -
ASD-STAN prEN 3340 (10/17/1988)
Aluminium alloy (7050) - Solution treated and artificially aged (T76) - Die forgings - a <= 200 mm
10/17/1988 - PDF - English -
Learn More€30.19 -
ASD-STAN prEN 3550 (10/17/1988)
Aluminium alloy (2024) - Solution treated, stretched and artificially aged (T8511) - Extruded bars and sections (a or D) <= 150 mm
10/17/1988 - PDF - English -
Learn More€25.79 -
ASD-STAN prEN 3123 (10/17/1988)
Aluminium alloy AL-C27 - Solution treated and artificially aged (T6) - Structural precision castings
10/17/1988 - PDF - English -
Learn More€25.79 -
ASD-STAN prEN 3343 (10/17/1988)
Aluminium alloy (7010) - Solution treated and artificially aged (T76511) - Extruded bars and sections - 1 < (a or D) <= 130 mm - With peripheral coarse grain control
10/17/1988 - PDF - English -
Learn More€25.79 -
ASD-STAN prEN 3554 (10/17/1988)
Aluminium alloy (7010) - Solution treated, cold compressed and artificially aged (T7652) - Hand forgings a <= 200 mm
10/17/1988 - PDF - English -
Learn More€30.19 -
ASD-STAN prEN 3337 (10/17/1988)
Aluminium alloy (7010) - Solution treated and artificially aged (T74511) - Extruded bars and sections (a or D) <= 130 mm - With peripherical coarse grain control
10/17/1988 - PDF - English -
Learn More€25.79 -
ASD-STAN prEN 3348 (10/17/1988)
Aluminium alloy (2024) - Solution treated and artificially aged (T62) - plate - 6 <= a <= 50 mm
10/17/1988 - PDF - English -
Learn More€25.79 -
ASD-STAN prEN 3345 (10/17/1988)
Aluminium alloy (7150) - Solution treated, water quenched controlled stretched and artificially aged (T6511) - Extruded bar and section (a or D) <= 90 mm - With peripheral coarse grain control
10/17/1988 - PDF - English -
Learn More€25.79 -
ASD-STAN prEN 3555 (10/17/1988)
Aluminium alloy (7075) - Solution treated, controlled stretched and artificially aged (T79510) - Extruded bars and sections - 1,2 < (a or D) <= 100 mm - With peripheral coarse grain control
10/17/1988 - PDF - English -
Learn More€25.79 -
ASD-STAN prEN 3122 (10/17/1988)
Aluminium alloy AL-C27 - Solution treated and artificially aged (T6) - High strength - Structural precision castings
10/17/1988 - PDF - English -
Learn More€25.79 -
LN 9075:1988-11
Aerospace; strips of aluminium alloys, normal planeness, cold rolled; dimensions, masses
11/1/1988 - PDF - German -
Learn More€57.29 -
DIN 29850:1989-10
Aerospace; heat treatment of wrought aluminium alloys
10/1/1989 - PDF - English, German -
Learn More€92.62 -
LN 1796:1989-11
Aerospace; square bars of wrought aluminium alloys, drawn; dimensions, masses
11/1/1989 - PDF - English, German -
Learn More€112.62 -
WL 3.1354-100:1990-01
Aerospace; wrought aluminium alloy with approx. 4,4Cu-1,5Mg-0,6Mn; sheet, plate, bars, extruded sections, structural tubes; design and production data, conversion
1/1/1990 - PDF - English, German -
Learn More€39.35 -
WL 3.2374-100:1990-01
Aerospace; cast aluminium alloy with approx. 7Si-0,3Mg; sand casting, investment casting and permanent mould casting; design and production data, conversion
1/1/1990 - PDF - English, German -
Learn More€52.90 -
WL 3.1254-100:1990-01
Aerospace; wrought aluminium alloy with approx. 4,5Cu-0,9Si-0,8Mn-0,5Mg; die forgings and hand forgings; design and production data, conversion
1/1/1990 - PDF - English, German -
Learn More€52.90 -
WL 3.2374-1:1990-01
Aerospace; cast aluminium alloy with approx. 7Si-0,3Mg; sand casting
1/1/1990 - PDF - English, German -
Learn More€22.99 -
WL 3.1254-1:1990-01
Aerospace; wrought aluminium alloy with approx. 4,5Cu-0,9Si-0,8Mn-0,5Mg; die forgings
1/1/1990 - PDF - English, German -
Learn More€22.99 -
WL 3.1754-1:1990-01
Aerospace; cast aluminium alloy with approx. 5Cu-1,5Ni-0,25Mn-0,25Sb-0,25Co-0,2Ti-0,2Zr; sand casting and investment casting
1/1/1990 - PDF - English, German -
Learn More€22.99 -
WL 3.1354-4:1990-01
Aerospace; wrought aluminium alloy with approx. 4,4Cu-1,5Mg-0,6Mn; structural tubes
1/1/1990 - PDF - English, German -
Learn More€22.99 -
WL 3.2374-3:1990-01
Aerospace; cast aluminium alloy with approx. 7Si-0,3Mg; permanent mould casting
1/1/1990 - PDF - English, German -
Learn More€22.99 -
WL 3.1254-2:1990-01
Aerospace; wrought aluminium alloy with approx. 4,5Cu-0,9Si-0,8Mn-0,5Mg; hand forgings
1/1/1990 - PDF - English, German -
Learn More€32.34 -
WL 3.1754-100:1990-01
Aerospace; cast aluminium alloy with approx. 5Cu-1,5Ni-0,25Mn-0,25Sb-0,25Co-0,2Ti-0,2Zr; sand casting and investment casting; design and production data, conversion
1/1/1990 - PDF - English, German -
Learn More€32.34 -
BS 7L 37:1989
Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-silicon-manganese alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A)
1/31/1990 - PDF - English -
Learn More€151.00 -
BS L 172:1989
Specification for extruded, rolled or cast forging stock of aluminium-zinc-magnesium-manganese-copper alloy (for manufacture of forgings to BS L 171) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
1/31/1990 - PDF - English -
Learn More€151.00 -
BS L 170:1989
Specification for extruded bars and sections of aluminium-zinc-copper-chromium alloy (solution treated, controlled stretched and artificially aged) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.23) (7075)
2/28/1990 - PDF - English -
Learn More€151.00 -
WL 3.3214-3:1990-03
Aerospace; wrought aluminium alloy with approx. 1,0Mg-0,6Si-0,3Cu-0,20Cr; sections
3/1/1990 - PDF - English, German -
Learn More€32.34 -
WL 3.4144-4:1990-03
Aerospace; wrought aluminium alloy with approx. 6,2Zn-2,3Cu-2,2Mg-0,12Zr; rivet wire and rivets
3/1/1990 - PDF - English, German -
Learn More€22.99 -
WL 3.4364-100:1990-03
Aerospace; wrought aluminium alloy with approx. 5,6Zn-2,5Mg-1,6Cu-0,23Cr; sheet, plate, bars, extruded sections, die forgings and hand forgings; design and production data, conversion
3/1/1990 - PDF - English, German -
Learn More€52.90 -
WL 3.3524-2:1990-03
Aerospace; wrought aluminium alloy with approx. 2,5Mg-0,25Cr; internal pressure tubes and tubes for fluids, seamless
3/1/1990 - PDF - English, German -
Learn More€22.99 -
WL 3.4334-100:1990-03
Aerospace; wrought aluminium alloy with approx. 5,6Zn-2,5Mg-1,6Cu-0,23Cr; die forgings and hand forgings; design and production data, conversion
3/1/1990 - PDF - English, German -
Learn More€52.90 -
NF EN 2076-3, L10-601-3 (03/1990)
Aerospace series. Aluminium and magnesium alloy ingots and castings. Technical specification. Part 3 : pre-production and production castings. - Série aérospatiale
3/1/1990 - Paper - French -
Learn More€75.67 -
WL 3.3214-4:1990-03
Aerospace; wrought aluminium alloy with approx. 1,0Mg-0,6Si-0,3Cu-0,20Cr; die forgings and hand forgings
3/1/1990 - PDF - English, German -
Learn More€22.99 -
WL 3.4334-1:1990-03
Aerospace; wrought aluminium alloy with approx. 5,6Zn-2,5Mg-1,6Cu-0,23Cr; die forgings
3/1/1990 - PDF - English, German -
Learn More€22.99 -
WL 3.4374-100:1990-03
Aerospace; wrought aluminium alloy with approx. 5,6Zn-2,5Mg-1,6Cu-0,23Cr; sheet and tapered sheet, clad; design and production data, conversion
3/1/1990 - PDF - English, German -
Learn More€39.35 -
NF EN 2076-1, L10-601-1 (03/1990)
Aerospace series. Aluminium and magnesium alloy ingots and castings. Technical specification. Part 1 : general requirements. - Série aérospatiale
3/1/1990 - Paper - French -
Learn More€60.67 -
WL 3.3214-2:1990-03
Aerospace; wrought aluminium alloy with approx. 1,0Mg-0,6Si-0,3Cu-0,20Cr; bars
3/1/1990 - PDF - English, German -
Learn More€39.35 -
WL 3.3524-100:1990-03
Aerospace; wrought aluminium alloy with approx. 2,5Mg-0,25Cr; sheet, strip, internal pressure tubes and tubes for fluids, seamless; design and production data, conversion
3/1/1990 - PDF - English, German -
Learn More€22.99 -
WL 3.4364-1:1990-03
Aerospace; wrought aluminium alloy with approx. 5,6Zn-2,5Mg-1,6Cu-0,23Cr; sheet and plate
3/1/1990 - PDF - English, German -
Learn More€39.35