49.025.20 : Aluminium

Items 1 to 200 of 1708 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  • SAE AMS 4082R:2020-06-11

    Aluminum Alloy, Seamless Drawn Tubing, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
    6/11/2020 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 2767A:2020-05-07

    Uphill Quenching of Aluminum Alloy Product
    5/7/2020 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4325A:2020-05-05

    Aluminum Alloy, Extruded Wide Panel Profiles (7150-T77511) 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr Solution Heat Treated, Stress-Relieved, Straightened and Overaged
    5/5/2020 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4087J:2020-04-10

    Aluminum Alloy Tubing, Seamless, Drawn 4.4Cu - 1.5Mg - 0.60Mn (2024-O) Annealed
    4/10/2020 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4287B:2020-04-10

    Aluminum Alloy, Extrusion 2.7Cu - 1.8Li - 0.7Zn - 0.3Mn - 0.3Mg - 0.08Zr (2099-T83) Solution Heat Treated, Stress Relieved by Stretching 1 to 4% and Aged
    4/10/2020 - PDF - English - SAE
    Learn More
    €77.00

  • NBN EN 4707:2020

    Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium
    2/27/2020 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 4707:2020

    Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium
    2/27/2020 - PDF - French - NBN
    Learn More
    €45.00

  • BS EN 2633:2015 + Redline

    Tracked Changes. Aerospace series. Aluminium alloy AL-P2024. AlCu4Mg1. T3511. Extruded bars and sections. 1,2 mm $3L De $3L 160 mm with peripheral coarse grain control
    2/27/2020 - PDF - English - BSI
    Learn More
    €169.46

  • NBN EN 4707:2020

    Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium
    2/27/2020 - PDF - German - NBN
    Learn More
    €45.00

  • SAE AMS 4144G:2020-02-18

    Aluminum Alloy, Hand Forgings and Rolled Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
    2/18/2020 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4215J:2020-02-17

    Aluminum Alloy, Castings 5.0Si - 1.2Cu - 0.50Mg (C355.0-T6) Solution and Precipitation Heat Treated
    2/17/2020 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4324B:2020-02-10

    Aluminum Alloy, Extruded Rod, Bar and Profiles (7055-T74511) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress-Relieved, and Overaged
    2/10/2020 - PDF - English - SAE
    Learn More
    €77.00

  • PR NF EN 6025, L10-623PR (02/2020)


    2/1/2020 - Paper - French - AFNOR
    Learn More
    €55.49

  • UNE-EN 4707:2020

    Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium (Endorsed by Asociación Española de Normalización in February of 2020.)
    2/1/2020 - PDF - English - AENOR
    Learn More
    €59.00

  • SAE AMS 4351A:2020-01-30

    Aluminum Alloy, Plate (7065-T7651) 7.7Zn - 2.1Cu - 1.65Mg - 0.10Zr Solution Heat Treated, Stress-Relieved, and Overaged
    1/30/2020 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4361A:2020-01-30

    Aluminum Alloy, Plate (7065-T7451) 7.7Zn - 2.1Cu - 1.65Mg - 0.10Zr Solution Heat Treated, Stress-Relieved, and Overaged
    1/30/2020 - PDF - English - SAE
    Learn More
    €77.00

  • BS EN 4707:2020

    Aerospace series. Acid pickling of aluminium and aluminium alloys without hexavalent chromium
    1/23/2020 - PDF - English - BSI
    Learn More
    €154.05

  • 20/30410794 DC:2020

    BS EN 4827. Aerospace series. Hexavalent chromium free anodizing of aluminium and aluminium alloys
    1/20/2020 - PDF - English - BSI
    Learn More
    €23.70

  • SAE AMS 4243C:2020-01-13

    Aluminum Alloy, Alclad Sheet 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (Alclad 7050-T76) Solution Heat Treated and Overaged
    1/13/2020 - PDF - English - SAE
    Learn More
    €77.00

  • NF EN 4707, L10-313 (01/2020)

    Série aérospatiale - Décapage acide de l'aluminium et des alliages d'aluminium sans chrome hexavalent
    1/1/2020 - Paper - English, French - AFNOR
    Learn More
    €110.46

  • SAE AMS 4204D:2019-12-27

    Aluminum Alloy, Plate 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7651) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
    12/27/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4274B:2019-12-17

    Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-O) Annealed, Fine Grain
    12/17/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4143F:2019-12-16

    Aluminum Alloy Forgings and Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T6) Solution and Precipitation Heat Treated
    12/16/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4013H:2019-11-25

    Aluminum Sheet, Laminated Surface Bonded
    11/25/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4328B:2019-11-25

    Aluminum Alloy, Plate (2397-T87) 2.8Cu - 1.4Li - 0.30Mn - 0.12Zr - 0.10Zn Solution Heat Treated, Cold Worked, and Artificially Aged
    11/25/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4456A:2019-11-25

    Aluminum Alloy, Hand Forgings 8.0Zn - 1.0Cu - 1.6Mg - 0.12Zr (7037-T7452) Solution Heat Treated, Compression Stress Relieved, and Overaged
    11/25/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS-QQ-A-200/3A:2019-11-19

    Aluminum Alloy 2024, Bar, Rod, Shapes, Tube, and Wire, Extruded (Stabilized: Nov 2019)
    11/19/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS-QQ-A-200C:2019-11-19

    Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes, Tube, and Wire, Extruded: General Specification for (Stabilized: Nov 2019)
    11/19/2019 - PDF - English - SAE
    Learn More
    €77.00

  • UNE-EN 2390:2019

    Aerospace series - Aluminium alloy 6082-T6 - Tubes for structures 0,6 mm = a = 12,5 mm
    11/1/2019 - PDF - English - AENOR
    Learn More
    €42.00

  • UNE-EN 4827:2019

    Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys (Endorsed by Asociación Española de Normalización in November of 2019.)
    11/1/2019 - PDF - English - AENOR
    Learn More
    €68.00

  • SAE AMS 7909D:2019-10-29

    Aluminum Beryllium, NNS Preforms Hot Isostatic Pressed 38Al - 62Be (Stabilized: Oct 2019)
    10/29/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4293A:2019-10-24

    Aluminum Alloy Extrusions 7.9Zn - 1.6Cu - 2.2Mg - 0.16Cr (7249-T76511) Solution Heat Treated, Stress-Relieved, Straightened, and Overaged
    10/24/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4173G:2019-10-17

    Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511 or T6510) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated
    10/17/2019 - PDF - English - SAE
    Learn More
    €77.00

  • BS EN 4827:2019

    Aerospace series. Hexavalent chromium free anodizing of aluminium and aluminium alloys
    10/7/2019 - PDF - English - BSI
    Learn More
    €215.67

  • UNE-EN 2125:2019

    Aerospace series - Aluminium alloy Al-P16- - T6151 - Plates - 6 mm < a = 120 mm
    10/1/2019 - PDF - English - AENOR
    Learn More
    €38.00

  • SAE AMS 4095E:2019-10-01

    Aluminum Alloy, Alclad Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T31, Sheet, Solution Heat Treated and Cold Worked Alclad 2219-T351, Plate, Solution Heat Treated and Stress Relieved
    10/1/2019 - PDF - English - SAE
    Learn More
    €77.00

  • BS EN 2390:2019

    Aerospace series. Aluminium alloy 6082-T6. Tubes for structures 0,6 mm = a = 12,5 mm
    9/26/2019 - PDF - English - BSI
    Learn More
    €130.35

  • NBN EN 2125:2019

    Aerospace series - Aluminium alloy Al-P16- - T6151 - Plates - 6 mm < a = 120 mm
    9/25/2019 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 2125:2019

    Aerospace series - Aluminium alloy Al-P16- - T6151 - Plates - 6 mm < a = 120 mm
    9/25/2019 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN 2125:2019

    Aerospace series - Aluminium alloy Al-P16- - T6151 - Plates - 6 mm < a = 120 mm
    9/25/2019 - PDF - German - NBN
    Learn More
    €45.00

  • BS EN 2125:2019

    Aerospace series. Aluminium alloy Al-P16-T6151. Plates. 6 mm < a < 120 mm
    9/12/2019 - PDF - English - BSI
    Learn More
    €130.35

  • SAE AMS 4316B:2019-09-10

    Aluminum Alloy, Alclad Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075, -T76 Sheet, -T7651 Plate) Solution and Precipitation Heat Treated
    9/10/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4041T:2019-09-03

    Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024, -T3 Sheet/-T351 Plate with 1-1/2% Alclad) Solution Heat Treated, Cold Worked and Naturally Aged
    9/3/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4131E:2019-09-03

    Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged
    9/3/2019 - PDF - English - SAE
    Learn More
    €77.00

  • NF EN 2390, L10-621 (09/2019)

    Série aérospatiale - Alliage d'aluminium 6082-T6 - Tubes pour structures 0,6 mm
    9/1/2019 - Paper - English, French - AFNOR
    Learn More
    €51.24

  • NF EN 2125, L10-622 (09/2019)


    9/1/2019 - Paper - English, French - AFNOR
    Learn More
    €40.69

  • SAE AMS 3414F:2019-08-20

    Flux, Aluminum Welding (Stabilized: Aug 2019)
    8/20/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4122M:2019-08-01

    Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T651) Solution and Precipitation Heat Treated
    8/1/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4126D:2019-08-01

    Aluminum Alloy, Die and Hand Forgings and Rolled Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated
    8/1/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4186E:2019-08-01

    Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-F) As Fabricated, or When Specified, Annealed (7075-O)
    8/1/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4164J:2019-07-24

    Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510) Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, Unstraightened
    7/24/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4063F:2019-07-18

    Aluminum Alloy, Clad One Side, Sheet 1.25Mn - 0.12Cu (No. 11-0 Brazing Sheet) Annealed
    7/18/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4214K:2019-07-12

    Castings, Aluminum Alloy Sand 5.0Si - 1.2Cu - 0.50Mg (355.0-T71) Solution Heat Treated and Overaged
    7/12/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4319C:2019-07-12

    Aluminum Alloy, Rolled or Cold Finished, Bars and Rods 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T651) Solution Heat Treated, Stress Relieved, Artificially Aged
    7/12/2019 - PDF - English - SAE
    Learn More
    €77.00

  • BS EN 2638:2019

    Aerospace series. Aluminium alloy 2024-. T3. Extruded bar and section. 1,2 mm = (a or D) = 150 mm with coarse peripheral grain control
    7/9/2019 - PDF - English - BSI
    Learn More
    €130.35

  • SAE AMS 4317B:2019-07-02

    Aluminum Alloy, Extruded Bar, Rod, and Shapes 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075-T76(51X) Solution Heat Treated and Overaged
    7/2/2019 - PDF - English - SAE
    Learn More
    €77.00

  • UNE-EN 2114:2019

    Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D = 10 mm
    7/1/2019 - PDF - English - AENOR
    Learn More
    €38.00

  • UNE-EN 2638:2019

    Aerospace series - Aluminium alloy 2024- - T3 - Extruded bar and section - 1,2 mm = (a or D) = 150 mm with coarse peripheral grain control
    7/1/2019 - PDF - English - AENOR
    Learn More
    €59.00

  • UNE-EN 2510:2019

    Aerospace series - Aluminium alloy 2024- - T42 - Drawn tubes for structural applications (Endorsed by Asociación Española de Normalización in July of 2019.)
    7/1/2019 - PDF - English - AENOR
    Learn More
    €59.00

  • NBN EN 2638:2019

    Aerospace series - Aluminium alloy 2024- - T3 - Extruded bar and section - 1,2 mm = (a or D) = 150 mm with coarse peripheral grain control
    6/26/2019 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 2638:2019

    Aerospace series - Aluminium alloy 2024- - T3 - Extruded bar and section - 1,2 mm = (a or D) = 150 mm with coarse peripheral grain control
    6/26/2019 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN 2510:2019

    Aerospace series - Aluminium alloy 2024- - T42 - Drawn tubes for structural applications
    6/26/2019 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 2510:2019

    Aerospace series - Aluminium alloy 2024- - T42 - Drawn tubes for structural applications
    6/26/2019 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 2510:2019

    Aerospace series - Aluminium alloy 2024- - T42 - Drawn tubes for structural applications
    6/26/2019 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN 2114:2019

    Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D = 10 mm
    6/26/2019 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 2114:2019

    Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D = 10 mm
    6/26/2019 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 2114:2019

    Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D = 10 mm
    6/26/2019 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN 2638:2019

    Aerospace series - Aluminium alloy 2024- - T3 - Extruded bar and section - 1,2 mm = (a or D) = 150 mm with coarse peripheral grain control
    6/26/2019 - PDF - German - NBN
    Learn More
    €45.00

  • SAE AMS 4152N:2019-06-17

    Aluminum Alloy Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated and Cold Worked
    6/17/2019 - PDF - English - SAE
    Learn More
    €77.00

  • BS EN 2114:2019

    Aerospace series. Aluminium 1050A-H14. Wire for solid rivets. D = 10 mm
    6/13/2019 - PDF - English - BSI
    Learn More
    €130.35

  • BS EN 2510:2019

    Aerospace series. Aluminium alloy 2024-. T42. Drawn tubes for structural applications
    6/13/2019 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN 4400-6:2019

    Aerospace series. Aluminium and aluminium- magnesium- alloys. Technical specification alloy forging stock
    5/22/2019 - PDF - English - BSI
    Learn More
    €215.67

  • SAE AMS 4150N:2019-05-14

    Aluminum Alloy, Extrusions and Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6) Solution and Precipitation Heat Treated
    5/14/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4413B:2019-05-10

    Aluminum Alloy, Plate 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T84) Solution Heat Treated, Stress Relieved, and Artificially Aged
    5/10/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4410A:2019-05-07

    Aluminum Alloy Plate (7081-T7451) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged (Stabilized: May 2019)
    5/7/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4411A:2019-05-07

    Aluminum Alloy Plate (7081-T7651) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged (Stabilized: May 2019)
    5/7/2019 - PDF - English - SAE
    Learn More
    €77.00

  • BS EN 2321:2019

    Aerospace series. Aluminium alloy 2024-T3. Bars and sections. a = 150 m
    5/2/2019 - PDF - English - BSI
    Learn More
    €130.35

  • NF EN 2114, L10-630 (05/2019)

    Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D = 10 mm - Série aérospatiale - Aluminium 1050A-H14 - Fils pour rivets pleins - D = 10 mm
    5/1/2019 - Paper - English, French - AFNOR
    Learn More
    €40.69

  • NF EN 2510, L10-631 (05/2019)


    5/1/2019 - Paper - English, French - AFNOR
    Learn More
    €40.69

  • UNE-EN 4289:2019

    Aerospace series - Aluminium alloy AL-P7175- Forging stock (Endorsed by Asociación Española de Normalización in May of 2019.)
    5/1/2019 - PDF - English - AENOR
    Learn More
    €38.00

  • UNE-EN 4400-1:2019

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 1: Aluminium and aluminium alloy plate (Endorsed by Asociación Española de Normalización in May of 2019.)
    5/1/2019 - PDF - English - AENOR
    Learn More
    €76.00

  • UNE-EN 4400-2:2019

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 2: Aluminium and aluminium alloy sheet and strip (Endorsed by Asociación Española de Normalización in May of 2019.)
    5/1/2019 - PDF - English - AENOR
    Learn More
    €76.00

  • UNE-EN 4400-3:2019

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section (Endorsed by Asociación Española de Normalización in May of 2019.)
    5/1/2019 - PDF - English - AENOR
    Learn More
    €75.00

  • UNE-EN 4400-6:2019

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 6: Aluminium alloy forging stock (Endorsed by Asociación Española de Normalización in May of 2019.)
    5/1/2019 - PDF - English - AENOR
    Learn More
    €66.00

  • UNE-EN 2321:2019

    Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a <= 150 mm (Endorsed by Asociación Española de Normalización in May of 2019.)
    5/1/2019 - PDF - English - AENOR
    Learn More
    €42.00

  • UNE-EN 2699:2019

    Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm <= D <= 50 mm (Endorsed by Asociación Española de Normalización in May of 2019.)
    5/1/2019 - PDF - English - AENOR
    Learn More
    €38.00

  • UNE-EN 2320:2019

    Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a <= 75 mm (Endorsed by Asociación Española de Normalización in May of 2019.)
    5/1/2019 - PDF - English - AENOR
    Learn More
    €38.00

  • NF EN 2638, L10-632 (05/2019)

    Série aérospatiale - Alliage d'aluminium 2024 - T3 - Barres et profilés filés - 1,2 mm
    5/1/2019 - Paper - English, French - AFNOR
    Learn More
    €53.94

  • BS EN 2699:2019

    Aerospace series. Aluminium alloy (5086). Annealed and straightened (H111). Drawn bar. 6 mm = D = 50 mm
    4/26/2019 - PDF - English - BSI
    Learn More
    €130.35

  • NBN EN 2699:2019

    Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm = D = 50 mm
    4/17/2019 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 2699:2019

    Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm = D = 50 mm
    4/17/2019 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 2699:2019

    Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm = D = 50 mm
    4/17/2019 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN 2320:2019

    Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a = 75 mm
    4/17/2019 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 2320:2019

    Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a = 75 mm
    4/17/2019 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 2320:2019

    Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a = 75 mm
    4/17/2019 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN 2321:2019

    Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a = 150 mm
    4/17/2019 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 2321:2019

    Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a = 150 mm
    4/17/2019 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 2321:2019

    Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a = 150 mm
    4/17/2019 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN 4400-2:2019

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 2: Aluminium and aluminium alloy sheet and strip
    4/17/2019 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN 4400-2:2019

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 2: Aluminium and aluminium alloy sheet and strip
    4/17/2019 - PDF - French - NBN
    Learn More
    €77.00

  • NBN EN 4400-3:2019

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section
    4/17/2019 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN 4400-3:2019

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section
    4/17/2019 - PDF - French - NBN
    Learn More
    €77.00

  • NBN EN 4400-6:2019

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 6: Aluminium alloy forging stock
    4/17/2019 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN 4400-6:2019

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 6: Aluminium alloy forging stock
    4/17/2019 - PDF - French - NBN
    Learn More
    €56.00

  • SAE ARP 823F:2019-04-17

    Minimizing Stress-Corrosion Cracking in Wrought High-Strength Aluminum Alloy Products
    4/17/2019 - PDF - English - SAE
    Learn More
    €77.00

  • BS EN 4400-2:2019

    Aerospace series. Aluminium and aluminium- magnesium- alloys. Technical specification aluminium alloy sheet strip
    4/12/2019 - PDF - English - BSI
    Learn More
    €253.59

  • BS EN 4400-3:2019

    Aerospace series. Aluminium and aluminium- magnesium- alloys. Technical specification aluminium alloy bar section
    4/12/2019 - PDF - English - BSI
    Learn More
    €253.59

  • BS EN 4289:2019

    Aerospace series. Aluminium alloy AL-P7175. Forging stock
    4/12/2019 - PDF - English - BSI
    Learn More
    €130.35

  • BS EN 4400-1:2019

    Aerospace series. Aluminium and aluminium- magnesium- alloys. Technical specification aluminium alloy plate
    4/12/2019 - PDF - English - BSI
    Learn More
    €253.59

  • SAE AMS 4185F:2019-04-11

    Filler Metal, Aluminum Brazing 12Si
    4/11/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 2770P:2019-04-08

    Heat Treatment of Wrought Aluminum Alloy Parts
    4/8/2019 - PDF - English - SAE
    Learn More
    €77.00

  • BS EN 2320:2019

    Aerospace series. Aluminium alloy 2024-T4. Drawn bar. a = 75 mm
    3/28/2019 - PDF - English - BSI
    Learn More
    €130.35

  • SAE AMS 3673D:2019-03-28

    Cloth, Glass, Aluminum Face, Silicone Rubber Back (Stabilized: Mar 2019)
    3/28/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4172G:2019-03-26

    Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4511 or T4510) Solution Heat Treated and Stress Relieved by Stretching
    3/26/2019 - PDF - English - SAE
    Learn More
    €77.00

  • 19/30393614 DC:2019

    BS EN 4868. Aerospace series. Anodic electrodeposition of hexavalent chromium free primer
    3/20/2019 - PDF - English - BSI
    Learn More
    €23.70

  • NF EN 4289, L10-616 (03/2019)

    Aerospace series - Aluminium alloy AL-P7175- Forging stock - Série aérospatiale - Alliage d'aluminium AL-P7175 - Produits destinés à la forge
    3/1/2019 - Paper - English, French - AFNOR
    Learn More
    €40.69

  • NF EN 2321, L10-613 (03/2019)

    Aerospace series - Aluminium Alloy 2024-T3 - Bars and Sections - a
    3/1/2019 - Paper - English, French - AFNOR
    Learn More
    €51.24

  • NF EN 2699, L10-633 (03/2019)


    3/1/2019 - Paper - English, French - AFNOR
    Learn More
    €42.83

  • NF EN 2320, L10-619 (03/2019)


    3/1/2019 - Paper - English, French - AFNOR
    Learn More
    €42.83

  • NF EN 4400-6, L10-603-6 (03/2019)

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 6 : aluminium alloy forging stock - Série aérospatiale - Aluminium et alliages d'aluminium et magnésium - Spécification technique - Partie 6 : Produits destinés à la forge en alliage d'aluminium
    3/1/2019 - Paper - English, French - AFNOR
    Learn More
    €88.44

  • NF EN 4400-1, L10-603-1 (03/2019)

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 1 : aluminium and aluminium alloy plate - Série aérospatiale
    3/1/2019 - Paper - English, French - AFNOR
    Learn More
    €122.38

  • NF EN 4400-2, L10-603-2 (03/2019)

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 2 : aluminium and aluminium alloy sheet and strip - Série aérospatiale
    3/1/2019 - Paper - English, French - AFNOR
    Learn More
    €122.38

  • NF EN 4400-3, L10-603-3 (03/2019)

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3 : aluminium and aluminium alloy bar and section - Série aérospatiale
    3/1/2019 - Paper - English, French - AFNOR
    Learn More
    €122.38

  • SAE AMS 4165J:2019-02-18

    Aluminum Alloy, Extrusions 4.4Cu – 1.5Mg – 0.60Mn (2024-T3511) Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, and Straightened
    2/18/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4064G:2019-02-13

    Aluminum Alloy, Clad Two Sides Sheet 1.25Mn - 0.12Cu (No. 12-0 Brazing Sheet) Annealed
    2/13/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4124F:2019-02-06

    Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged
    2/6/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4127K:2019-02-06

    Aluminum Alloy, Forgings and Rolled or Forged Rings (6061-T6) Solution and Precipitation Heat Treated
    2/6/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4202E:2019-02-04

    Aluminum Alloy Plate 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T7351) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated
    2/4/2019 - PDF - English - SAE
    Learn More
    €77.00

  • UNE-EN 2715:2018

    Aerospace series - Macrographic examination of aluminium and aluminium alloy wrought products, forging stock and forgings (Endorsed by Asociación Española de Normalización in February of 2019.)
    2/1/2019 - PDF - English - AENOR
    Learn More
    €24.00

  • UNE-EN 2341:2018

    Aerospace series - Aluminium and aluminium alloy - Square and rectangular extruded bars - Dimensions (Endorsed by Asociación Española de Normalización in February of 2019.)
    2/1/2019 - PDF - English - AENOR
    Learn More
    €57.00

  • SAE AMS 4311F:2019-01-04

    Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4469A:2019-01-04

    Aluminum Alloy Tubing, Seamless, Drawn 1.8Cu - 1.0Mg - 0.8Si - 0.20Cr Solution Heat Treated, Stress-Relieved by Stretching, and Aged (2013-T4511)
    1/4/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4083M:2019-01-02

    Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
    1/2/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4085F:2019-01-02

    Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged
    1/2/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4132H:2019-01-02

    Aluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61) Solution and Precipitation Heat Treated
    1/2/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4250C:2019-01-02

    Aluminum Alloy, Plate 8.1Zn - 2.3Mg - 1.0Cu - Zr (7449-T7651) Solution Heat Treated, Stress Relieved, and Overaged
    1/2/2019 - PDF - English - SAE
    Learn More
    €77.00

  • UNE-EN 2709:2018

    Aerospace series - Aluminium alloy 2024- - T3510 - Bars and sections - 1,2 mm = (a or D) = 150 mm - With peripheral coarse grain control
    1/1/2019 - PDF - English - AENOR
    Learn More
    €38.00

  • UNE-EN 2716:2018

    Aerospace series - Test method - Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys (Endorsed by Asociación Española de Normalización in January of 2019.)
    1/1/2019 - PDF - English - AENOR
    Learn More
    €24.00

  • UNE-EN 2726:2018

    Aerospace series - Aluminium alloy Al-C42201 - T6 - Sand castings - a = 20 mm
    1/1/2019 - PDF - English - AENOR
    Learn More
    €38.00

  • UNE-EN 2728:2018

    Aerospace series - Aluminium alloy AL-C42101 - T6 - Sand casting - a = 20 mm
    1/1/2019 - PDF - English - AENOR
    Learn More
    €38.00

  • UNE-EN 2813:2018

    Aerospace series - Aluminium alloy AL-P-6061- - T6 - Drawn tube for pressure applications - 0,6 mm <= a <= 12,5 mm (Endorsed by Asociación Española de Normalización in January of 2019.)
    1/1/2019 - PDF - English - AENOR
    Learn More
    €38.00

  • SAE AMS 4470C:2018-12-27

    Aluminum Alloy, Plate (7085-T7451) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged
    12/27/2018 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS-WW-T-700/7B:2018-12-27

    Tube, Aluminum Alloy, Drawn, Seamless, 7075 (Stabilized: Dec 2018)
    12/27/2018 - PDF - English - SAE
    Learn More
    €77.00

  • BS EN 2715:2018

    Aerospace series. Macrographic examination of aluminium and aluminium alloy wrought products, forging stock and forgings
    12/20/2018 - PDF - English - BSI
    Learn More
    €130.35

  • BS EN 2341:2018

    Aerospace series. Aluminium and aluminium alloy. Square and rectangular extruded bars. Dimensions
    12/20/2018 - PDF - English - BSI
    Learn More
    €130.35

  • 18/30389354 DC:2018

    BS EN 4881. Aerospace series. Micro-arc oxidation of aluminum and aluminum alloys
    12/20/2018 - PDF - English - BSI
    Learn More
    €23.70

  • NBN EN 2709:2018

    Aerospace series - Aluminium alloy 2024- - T3510 - Bars and sections - 1,2 mm = (a or D) = 150 mm - With peripheral coarse grain control
    12/19/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 2709:2018

    Aerospace series - Aluminium alloy 2024- - T3510 - Bars and sections - 1,2 mm = (a or D) = 150 mm - With peripheral coarse grain control
    12/19/2018 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 2709:2018

    Aerospace series - Aluminium alloy 2024- - T3510 - Bars and sections - 1,2 mm = (a or D) = 150 mm - With peripheral coarse grain control
    12/19/2018 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN 2716:2018

    Aerospace series - Test method - Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys
    12/19/2018 - PDF - German - NBN
    Learn More
    €30.00

  • NBN EN 2716:2018

    Aerospace series - Test method - Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys
    12/19/2018 - PDF - English - NBN
    Learn More
    €30.00

  • NBN EN 2716:2018

    Aerospace series - Test method - Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys
    12/19/2018 - PDF - French - NBN
    Learn More
    €30.00

  • NBN EN 2726:2018

    Aerospace series - Aluminium alloy Al-C42201 - T6 - Sand castings - a = 20 mm
    12/19/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 2726:2018

    Aerospace series - Aluminium alloy Al-C42201 - T6 - Sand castings - a = 20 mm
    12/19/2018 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 2726:2018

    Aerospace series - Aluminium alloy Al-C42201 - T6 - Sand castings - a = 20 mm
    12/19/2018 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN 2728:2018

    Aerospace series - Aluminium alloy AL-C42101 - T6 - Sand casting - a = 20 mm
    12/19/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 2728:2018

    Aerospace series - Aluminium alloy AL-C42101 - T6 - Sand casting - a = 20 mm
    12/19/2018 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 2728:2018

    Aerospace series - Aluminium alloy AL-C42101 - T6 - Sand casting - a = 20 mm
    12/19/2018 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN 2813:2018

    Aerospace series - Aluminium alloy AL-P-6061- - T6 - Drawn tube for pressure applications - 0,6 mm = a = 12,5 mm
    12/19/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 2813:2018

    Aerospace series - Aluminium alloy AL-P-6061- - T6 - Drawn tube for pressure applications - 0,6 mm = a = 12,5 mm
    12/19/2018 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 2813:2018

    Aerospace series - Aluminium alloy AL-P-6061- - T6 - Drawn tube for pressure applications - 0,6 mm = a = 12,5 mm
    12/19/2018 - PDF - French - NBN
    Learn More
    €45.00

  • BS EN 2813:2018

    Aerospace series. Aluminium alloy AL-P-6061-. T6. Drawn tube for pressure applications. 0,6 mm = a = 12,5 mm
    12/6/2018 - PDF - English - BSI
    Learn More
    €130.35

  • BS EN 2726:2018

    Aerospace series. Aluminium alloy Al-C42201. T6. Sand castings. a = 20 mm
    12/3/2018 - PDF - English - BSI
    Learn More
    €130.35

  • BS EN 2728:2018

    Aerospace series. Aluminium alloy AL-C42101. T6. Sand casting. a = 20 mm
    12/3/2018 - PDF - English - BSI
    Learn More
    €130.35

  • BS EN 2709:2018

    Aerospace series. Aluminium alloy 2024-. T3510. Bars and sections. 1,2 mm = (a or D) = 150 mm. With peripheral coarse grain control
    12/3/2018 - PDF - English - BSI
    Learn More
    €130.35

  • BS EN 2716:2018

    Aerospace series. Test method. Determination of susceptibility to intergranular corrosion. Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys
    12/3/2018 - PDF - English - BSI
    Learn More
    €130.35

  • DIN EN 2320:2018-12

    Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a <= 75 mm, German and English version FprEN 2320:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • NF EN 2341, L10-608 (12/2018)

    Série aérospatiale - Barres filées de sections carrée et rectangulaire, en aluminium et alliages d'aluminium - Dimensions
    12/1/2018 - Paper - English, French - AFNOR
    Learn More
    €64.01

  • NF EN 2715, L10-607 (12/2018)

    Série aérospatiale - Examen macrographique des produits corroyés, des produits destinés à la forge et des pièces forgées ou matricées en aluminium ou en alliages d'aluminium
    12/1/2018 - Paper - English, French - AFNOR
    Learn More
    €29.39

  • SAE AMS-QQ-A-225/5A:2018-11-06

    Aluminum Alloy, 2017, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished (Stabilized: Nov 2018)
    11/6/2018 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4210L:2018-11-02

    Aluminum Alloy, Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T51) Precipitation Heat Treated
    11/2/2018 - PDF - English - SAE
    Learn More
    €77.00

  • NF EN 2709, L10-634 (11/2018)

    Série aérospatiale - Alliage d'aluminium 2024 - T3510 - Barres et profilés - 1,2 mm inférieur ou égal à (a ou D) inférieur ou égal à 150 mm - Limitation à la zone périphérique à gros grains
    11/1/2018 - Paper - English, French - AFNOR
    Learn More
    €42.83

  • NF EN 2813, L10-638 (11/2018)

    Série aérospatiale - Alliage d'aluminium AL-P-6061 - T6 - Tubes étirés pour applications sous pression - 0,6 mm inférieur ou égal à a inférieur ou égal à 12,5 mm - Série aérospatiale - Alliage d'aluminium AL-P-6061 - T6 - Tubes étirés pour applications sous pression - 0,6 mm
    11/1/2018 - Paper - English, French - AFNOR
    Learn More
    €40.69

  • NF EN 2726, L10-636 (11/2018)

    Série aérospatiale - Alliage d'aluminium Al-C42201 - T6 - Pièce moulée en 6 sable - a inférieur ou égal à 20 mm - Série aérospatiale - Alliage d'aluminium Al-C42201 - T6 - Pièce moulée en 6 sable - a = 20 mm
    11/1/2018 - Paper - English, French - AFNOR
    Learn More
    €40.69

  • NF EN 2716, L10-635 (11/2018)

    Série aérospat iale - Méthodes d'essai - Détermination de la susceptibilité à la corrosion intergranulaire - Produits corroyés en alliages d'aluminium série AL-P2XXX-, série AL-P7XXX- et alliages d'aluminium-lithium - Série aérospat iale - Méthodes d'essai - Détermination de la susceptibilité à la corrosion intergranulaire - Produits corroyés en alliages d'aluminium série AL - P2XXX - , série AL - P7XXX - et alliages d'aluminium - lithium
    11/1/2018 - Paper - English, French - AFNOR
    Learn More
    €29.39

  • NF EN 2728, L10-637 (11/2018)

    Série aérospatiale - Alliage d'aluminium AL-C42101 - T6 - Pièce moulée en sable - a
    11/1/2018 - Paper - English, French - AFNOR
    Learn More
    €40.69

  • DIN EN 2638:2018-09

    Aerospace series - Aluminium alloy 2024-T3 - Extruded bar and section - 1,2 mm <= (a or D) <= 150 mm with coarse peripheral grain control, German and English version FprEN 2638:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • DIN EN 2699:2018-09

    Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm <= D <= 50 mm, German and English version FprEN 2699:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2510:2018-09

    Aerospace series - Aluminium alloy 2024-T42 - Drawn tubes for structural applications, German and English version FprEN 2510:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2319:2018-09

    Aerospace series - Aluminium alloy 2024- - T3510 - Drawn bar - a <= 75 mm, German and English version EN 2319:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • DIN EN 2387:2018-09

    Aerospace series - Aluminium alloy 2014A- - T6 - Tubes for structures - 0,6 mm <= a <= 12,5 mm, German and English version EN 2387:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • UNE-EN 2319:2018

    Aerospace series - Aluminium alloy 2024- - T3510 - Drawn bar - a <= 75 mm (Endorsed by Asociación Española de Normalización in September of 2018.)
    9/1/2018 - PDF - English - AENOR
    Learn More
    €38.00

  • UNE-EN 2387:2018

    Aerospace series - Aluminium alloy 2014A- - T6 - Tubes for structures - 0,6 mm <= a <= 12,5 mm (Endorsed by Asociación Española de Normalización in September of 2018.)
    9/1/2018 - PDF - English - AENOR
    Learn More
    €38.00

  • UNE-EN 3719:2018

    Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard (Endorsed by Asociación Española de Normalización in September of 2018.)
    9/1/2018 - PDF - English - AENOR
    Learn More
    €38.00

  • SAE ARP 1947C:2018-08-22

    Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Allow Castings, Determination and Acceptance of
    8/22/2018 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4232D:2018-08-14

    Aluminum Alloy Extrusions 2.7Cu - 2.2Li - 0.12Zr (2090-T86) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
    8/14/2018 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4459B:2018-08-14

    Aluminum Alloy, Extrusion 2.7Cu - 1.8Li - 0.7Zn - 0.3Mn - 0.3Mg - 0.08Zr (2099-T81) Solution Heat Treated, Stress Relieved by Stretching 1 to 3% and Aged
    8/14/2018 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4134G:2018-08-08

    Aluminum Alloy, Die Forgings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4) Solution Heat and Naturally Aged
    8/8/2018 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4247C:2018-08-08

    Aluminum Alloy, Hand Forgings 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T7352) Solution Heat Treated, Stress Relieved by Compression, and Precipitation Heat Treated
    8/8/2018 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4177E:2018-08-06

    Core, Flexible Honeycomb, Aluminum Alloy For Sandwich Construction 5056, 350 (177)
    8/6/2018 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4178F:2018-08-06

    Core, Flexible Honeycomb, Aluminum Alloy, Treated for Sandwich Construction 5052, 350 (177)
    8/6/2018 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4147E:2018-08-03

    Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7352) Solution Heat Treated, Stress Relieved by Compression, and Overaged
    8/3/2018 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4349E:2018-08-03

    Core, Honeycomb, Aluminum Alloy, Corrosion Inhibited For Sandwich Construction 5056, 350 (177)
    8/3/2018 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4600A:2018-08-02

    Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold Worked (8%) and Naturally Aged (2219 -T37)
    8/2/2018 - PDF - English - SAE
    Learn More
    €77.00

  • NF EN 3719, L52-232 (08/2018)

    Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard - Série aérospatiale - Conducteurs en aluminium ou en alliage d'aluminium pour câbles électriques - Norme de produit
    8/1/2018 - Paper - English, French - AFNOR
    Learn More
    €51.24

  • BS EN 2319:2018

    Aerospace series. Aluminium alloy 2024 T3510. Drawn bar. a < 75 mm
    8/1/2018 - PDF - English - BSI
    Learn More
    €130.35

  • BS EN 2387:2018

    Aerospace series. Aluminium alloy 2014A T6. Tubes for structures. 0,6 mm < a < 12,5 mm
    8/1/2018 - PDF - English - BSI
    Learn More
    €130.35

  • SAE AMS 4248D:2018-07-27

    Aluminum Alloy Hand Forgings and Rolled Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T652) Solution Heat Treated, Stress Relief Compressed, and Precipitation Heat Treated
    7/27/2018 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4482A:2018-07-27

    Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P) Sand Cast, Solution, and Precipitation Heat Treated
    7/27/2018 - PDF - English - SAE
    Learn More
    €77.00

  • SAE AMS 4297B:2018-07-25

    Aluminum Alloy Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024, -T4 Flat Sheet) Solution Heat Treated, High Formability
    7/25/2018 - PDF - English - SAE
    Learn More
    €77.00

Items 1 to 200 of 1708 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9