49.025.10 : Steels
-
WL 1.7734-2:1982-03
Weldable heat-treatable chromium-molybdenum-vanadium steel with about 0.15C-1.4Cr-0.9Mo-0.25V, rods and forgings
3/1/1982 - PDF - German - DIN
Learn More€22.99 -
WL 1.7734-3:1982-03
Weldable heat-treatable chromium-molybdenum-vanadium steel with about 0.15C-1.4Cr-0.9Mo-0.25V, pipes
3/1/1982 - PDF - German - DIN
Learn More€22.99 -
WL 1.7734-4:1982-03
Weldable heat-treatable chromium-molybdenum-vanadium steel with about 0.15C-1.4Cr-0.9Mo-0.25V, filler metal
3/1/1982 - PDF - German - DIN
Learn More€22.99 -
BS S 159:1981 (R2014)
Specification for 12% chromium-nickel-molybdenum-vanadium heat-resisting steel bars for the manufacture of fasteners (1100-1300 MPa: limiting ruling section 50 mm)
12/31/1981 - PDF - English - BSI
Learn More€151.00 -
WL 1.3934:1981-03
Precipitation-hardening nickel-manganese-chromium steel with large thermal expansion, with about 0.7 C-12 Ni-5 Mn-3 Cr-1 V, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.3934 Beiblatt 1:1981-03
Precipitation-hardening nickel-manganese-chromium steel with large thermal expansion, with about 0.7 C-12 Ni-5 Mn-3 Cr-1 V, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.4044:1981-03
Stainless heat-treatable chromium steel with about 0.2 C-17 Cr-2 Ni, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.4044 Beiblatt 1:1981-03
Stainless heat-treatable chromium steel with about 0.2 C-17 Cr-2Ni, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.4911:1981-03
High temperature heat-treatable chromium-cobalt-molybdenum steel with about 0.1 C-11 Cr-6 Co-0.8 Mo-0.4 Nb-0.4 V, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.4911 Beiblatt 1:1981-03
High temperature heat-treatable chromium-cobalt-molybdenum steel with about 0.1 C-11 Cr-6 Co-0.8 Mo-0.4 Nb-0.4 V, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.4914:1981-03
High temperature heat-treatable chromium-molybdenum steel with about 0.15 C-11 Cr-0.7 Mo-0.4 Nb-0.4 V, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.4914 Beiblatt 1:1981-03
High temperature heat-treatable chromium-molybdenum steel with about 0.15 C-11 Cr-0.7 Mo-0.4 Nb-0.4 V, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.4933-1:1981-03
High temperature heat-treatable chromium-nickel-molybdenum steel with about 0.1 C-12 Cr-2.5 Ni-1.8 Mo-0.3 V, air molten, sheets and strips
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.4933-2:1981-03
High temperature heat-treatable chromium-nickel-molybdenum steel with about 0.1 C-12 Cr-2.5 Ni-1.8 Mo-0.3 V, air molten, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.4933 Beiblatt 1:1981-03
High temperature heat-treatable chromium-nickel-molybdenum steel with about 0.1 C-12 Cr-2.5 Ni-1.8 Mo-0.3 V, air molten, sheets, strips, rods, and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.4939-1:1981-03
High temperature heat-treatable chromium-nickel-molybdenum steel with about 0.1 C-12 Cr-2.5 Ni-1.8 Mo-0.3 V, remelted, sheets and strips
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.4939-2:1981-03
High temperature heat-treatable chromium-nickel-molybdenum steel with about 0.1 C-12 Cr-2.5 Ni-1.8 Mo-0.3 V, remelted, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.4939 Beiblatt 1:1981-03
High temperature heat-treatable chromium-nickel-molybdenum steel with about 0.1 C-12 Cr-2.5 Ni-1.8 Mo-0.3 V, remelted, sheets, strips, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.6354:1981-03
Ultra high-strength maraging nickel-cobalt-molybdenum steel with about 0.01 C-18 Ni-9 Co-5 Mo-0.7 Ti, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.6354 Beiblatt 1:1981-03
Ultra high-strength maraging nickel-cobalt-molybdenum steel with about 0.01 C-18 Ni-9 Co-5 Mo-0.7 Ti, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.6359-1:1981-03
Ultra high-strength maraging nickel-cobalt-molybdenum steel with about 0.01 C-18 Ni-8 Co-5 Mo-0.4 Ti, sheets and plates
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.6359-1 Beiblatt 1:1981-03
Ultra high-strength maraging nickel-cobalt-molybdenum steel with about 0.01 C-18 Ni-8 Co-5 Mo-0.4 Ti, sheets and plates
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.6359-2:1981-03
Ultra high-strength maraging nickel-cobalt-molybdenum steel with about 0.01 C-18 Ni-8 Co-5 Mo-0.4 Ti, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.6359-2 Beiblatt 1:1981-03
Ultra high-strength maraging nickel-cobalt-molybdenum steel with about 0.01 C-18 Ni-8 Co-5 Mo-0.4 Ti, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.8154:1981-03
Chromium-vanadium steel for springs with about 0.5 C-1 Cr-0.15 V, wire, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.8154 Beiblatt 1:1981-03
Chromium-vanadium steel for springs with about 0.5 C-1 Cr-0.15 V, wire, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.8514:1981-03
Chromium-molybdenum-vanadium nitriding steel with about 0.3 C-2.5 Cr-0.2 Mo-0.15 V, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
WL 1.8514 Beiblatt 1:1981-03
Chromium-molybdenum-vanadium nitriding steel with about 0.3 C-2.5 Cr-0.2 Mo-0.15 V, rods and forgings
3/1/1981 - PDF - German - DIN
Learn More€22.99 -
ASD-STAN prEN 2494 (06/01/1981)
Heat Resisting Steel FE-PM38 - 1000MPa <= Rm <= 1140MPa - Forgings - Aerospace Series
1/6/1981 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2447 (01/01/1981)
Steel FE-PL45 - 1100 MPa <= Rm <= 1300 MPa - Forgings - De <= 25 mm -
1/1/1981 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2449 (01/01/1981)
Steel FE-PL45 - 900 MPa <= Rm <= 1100 MPa - Forgings - De <= 40 mm
1/1/1981 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2451 (01/01/1981)
Steel FE-PL73 - 1230 MPa <= Rm <= 1420 MPa - Forgings - De <= 40 mm -
1/1/1981 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2468:1981
Steel FE-PA11 - Softened - Tubes 0,5 mm <= a <= 5 mm - Aerospace Series
1/1/1981 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2470 (01/01/1981)
Steel FE-PA11 - Softened And Cold Drawn - Wires For Rivets 1mm <= D <= 10 mm - Aerospace Series
1/1/1981 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2471 (01/01/1981)
Steel FE-PL74 - 1250 MPa <= Rm <= 1450 MPa - Bars De <= 40 mm - Aerospace Series
1/1/1981 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2476 (01/01/1981)
Steel FE-PL74 - 1100 MPa <= Rm <= 1300 MPa - Forgings De <= 100 mm - Aerospace Series
1/1/1981 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2477:1981
Steel FE-PL75 - 1100 MPa <= Rm <= 1250 MPa - Forgings De <= 100 mm - Aerospace Series
1/1/1981 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2479:1981
Steel FE-PL75 - 1250 MPa <= Rm <= 1400 MPa - Forgings De <= 40 mm - Aerospace Series
1/1/1981 - PDF - English - ASD-STAN
Learn More€15.10 -
DIN 29995:1980-10
Aerospace, segregation testing on etched slices of remelted steels, nickel and cobalt alloys
10/1/1980 - PDF - German - DIN
Learn More€39.35 -
€22.99
-
ASD-STAN prEN 2271 (06/01/1979)
Steel FE-PM13 S - 1800 MPa <= Rm <= 2000 MPa - Forgings De <= 70 mm - Aerospace Series
1/6/1979 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2272 (06/01/1979)
Steel FE-PM13 S - 1550 MPa <= Rm <= 1750 MPa - Forgings De <= 70 mm - Aerospace Series
1/6/1979 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2273 (06/01/1979)
Steel FE-PM13 S - 1800 MPa <= Rm <= 2000 MPa - Sheet And Plate a <= 30 mm - Aerospace Series
1/6/1979 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2312 (06/01/1979)
STEEL FE-PM42 - Rm >= 1350 MPa - FORGINGS - De <= 100 mm - AEROSPACE SERIES
1/6/1979 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2313:1979
STEEL FE-PM42 - Rm >= 1350 MPa - BARS - De <= 100 mm - AEROSPACE SERIES
1/6/1979 - PDF - English - ASD-STAN
Learn More€15.10 -
WL 1.4984-2:1978-12
High temperature austenitic chromium-nickel-molybdenum steel with about 0.07C-16Cr-16Ni-1.8Mo, rods and forgings
12/1/1978 - PDF - German - DIN
Learn More€22.99 -
WL 1.4984-3:1978-12
High temperature austenitic chromium-nickel-molybdenum steel with about 0.07C-16Cr-16Ni-1.8Mo, filler metal.
12/1/1978 - PDF - German - DIN
Learn More€22.99 -
WL 1.6964:1978-12
Ultra high-strength stainless maraging chromium-nickel-cobalt-molybdenum steel 0.01C-12Cr-8Ni-5Co-2Mo, rods and forgings
12/1/1978 - PDF - German - DIN
Learn More€22.99 -
WL 1.7334:1978-12
Case-hardening molybdenum-chromium steel with about 0.2C-0.45Mo-0.4Cr, rods and forgings
12/1/1978 - PDF - German - DIN
Learn More€22.99 -
WL 1.1144:1978-12
Unalloyed case-hardening steel with about 0.15C, rods and forgings
12/1/1978 - PDF - German - DIN
Learn More€22.99 -
WL 1.1174:1978-12
Unalloyed heat-treatable steel with about 0.35C, rods and forgings
12/1/1978 - PDF - German - DIN
Learn More€22.99 -
WL 1.1194:1978-12
Unalloyed heat-treatable steel with about 0.45C, rods and forgings
12/1/1978 - PDF - German - DIN
Learn More€22.99 -
€22.99
-
WL 1.4984-1:1978-12
High temperature austenitic chromium-nickel-molybdenum steel with about 0.07C-16Cr-16Ni-1.8Mo, sheets
12/1/1978 - PDF - German - DIN
Learn More€22.99 -
WL 1.4564-1:1977-12
Ultra high-strength precipitation-hardening stainless chromium-nickel-aluminium steel with about 0.07C-17Cr-7Ni-1Al, sheets, plates, strips
12/1/1977 - PDF - German - DIN
Learn More€22.99 -
WL 1.4574-1:1977-12
Ultra high-strength precipitation-hardening stainless chromium-nickel-molybdenum-aluminium steel with about 0.07C-15Cr-7Ni-2.5Mo-1Al, sheets, plates and strips
12/1/1977 - PDF - German - DIN
Learn More€22.99 -
WL 1.4574-2:1977-12
Ultra high-strength precipitation-hardening stainless chromium-nickel-molybdenum-aluminium steel with about 0.07C-15Cr-7Ni-2.5Mo-1Al, strain-hardened sheets and strips
12/1/1977 - PDF - German - DIN
Learn More€22.99 -
WL 1.4574-3:1977-12
Ultra high-strength precipitation-hardening stainless chromium-nickel-molybdenum-aluminium steel with about 0.07C-15Cr-7Ni-2.5Mo-1Al, rods and forgings
12/1/1977 - PDF - German - DIN
Learn More€22.99 -
WL 1.4984 Beiblatt 1:1977-12
High temperature austenitic chromium-nickel-molybdenum steel with about 0.07C-16Cr-16Ni-1.8Mo, sheets, rods, forgings and filler metal
12/1/1977 - PDF - German - DIN
Learn More€22.99 -
ASD-STAN prEN 2031 (10/01/1977)
STEEL FE-PL31 - HARDENED AND TEMPERED - BARS - AEROSPACE SERIES
10/1/1977 - PDF - English - ASD-STAN
Learn More€15.10 -
BS S 158:1977
Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
5/31/1977 - PDF - English - BSI
Learn More€151.00 -
BS 3S 91:1977
Specification for mild steel billets, bars, forgings and parts (suitable for bearing shells)
4/29/1977 - PDF - English - BSI
Learn More€151.00 -
BS 2S 131:1977
Specification for high thermal expansion steel billets, bars, forgings and parts (620 MPa: limiting ruling section 150 mm)
4/29/1977 - PDF - English - BSI
Learn More€151.00 -
BS 2S 142:1977
Specification for 1% chromium-molybdenum steel billets, bars, forgings and parts (900-1100 MPa: limiting ruling section 40 mm)
4/29/1977 - PDF - English - BSI
Learn More€151.00 -
ASD-STAN prEN 2207 (10/01/1977)
Steel FE-PLl43S - 900 MPa <= Rm <= 1100 MPa - Hand and die forgings De <= 40 mm
1/10/1977 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2208 (10/01/1977)
Steel FE-PLl43S - 650 MPa <= Rm <= 850 MPa - Hand and die forgings De <= 150 mm
1/10/1977 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2210 (10/01/1977)
Steel FE-PL43S - 650 MPa <= Rm <= 850 MPa - Tubes for structures - 0,5 mm <= a <= 12 mm - D >= 5 a
1/10/1977 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2211 (10/01/1977)
Steel FE-PL43S - 900 MPa <= Rm <= 1100 MPa - Tubes for structures - 2 mm <= a <= 12 mm - D >= 5 a
1/10/1977 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2212 (10/01/1977)
Steel FE-PL43S - 670 MPa <= Rm <= 870 MPa - Sheets, Strips and plates - 0,5 mm <= a <= 20 mm
1/10/1977 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2218 (10/01/1977)
Steel FE-PL52S - 980 MPa <= Rm <= 1180 MPa - Tubes for structures - a <= 4 mm - D >= 5 a
1/10/1977 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2219 (10/01/1977)
Steel FE-PL52S - 1030 MPa <= Rm <= 1230 MPa - Tubes for structures - a <= 2 mm - D >= 5 a
1/10/1977 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2220 (10/01/1977)
Steel FE-PL52S - 1080 MPa <= Rm <= 1250 MPa - Tubes for structures - 2 mm <= a <= 20 mm - D >= 5 a
1/10/1977 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2225 (10/01/1977)
Steel FE-PM32 - Hardened and tempered - Hand and die forgings
1/10/1977 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2247 (10/01/1977)
Steel FE-PL43S - 650 MPa <= Rm <= 850 MPa - Tubes for structures - 0,5 mm <= a <= 12 mm d >= 5 a
1/10/1977 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2120 (08/01/1977)
Steel FE-PA12 - Softened And Cold Drawn - Bars And Wires 0,25 mm <= D <= 2,5 mm - Aerospace Series
1/8/1977 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2227 (08/01/1977)
Steel FE-PM44 - Hardened and tempered - Hand and die forgings - De <= 150 mm
1/8/1977 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2228 (08/01/1977)
Steel FE-PA12 - 500 MPa <= Rm <= 700 MPa - Sheets - 0,5 mm <= a <= 6 mm
1/8/1977 - PDF - English - ASD-STAN
Learn More€15.10 -
BS 2S 146:1976
Specification for 4% nickel-chromium-molybdenum air-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1760-1960 MPa: limiting ruling section 100 mm)
11/30/1976 - PDF - English - BSI
Learn More€151.00 -
BS 2S 147:1976
Specification for 0.5% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
11/30/1976 - PDF - English - BSI
Learn More€151.00 -
BS 2S 149:1976 (R2014)
Specification for 1.75% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
11/30/1976 - PDF - English - BSI
Learn More€151.00 -
WL 1.4581:1976-11
Stainless austenitic chromium-nickel-molybdenum cast steel with about 0.06C-18Cr-12Ni-2.2Mo-0.5Nb, sand and investment casting
11/1/1976 - PDF - German - DIN
Learn More€22.99 -
WL 1.4581 Beiblatt 1:1976-11
Stainless austenitic chromium-nickel-molybdenum cast steel with about 0.06C-18Cr-12Ni-2.2Mo-0.5Nb, sand and investment casting
11/1/1976 - PDF - German - DIN
Learn More€22.99 -
WL 1.7334 Beiblatt 1:1976-11
Case-hardening molybdenum-chromium steel with about 0.2C-0.45Mo-0.4Cr, rods and forgings
11/1/1976 - PDF - German - DIN
Learn More€22.99 -
WL 1.7784-1:1976-11
Ultra high-strength chromium-molybdenum-vanadium steel with about 0.4C-5Cr-1.3Mo-0.5V, sheets and plates
11/1/1976 - PDF - German - DIN
Learn More€22.99 -
WL 1.7784-4:1976-11
Ultra high-strength chromium-molybdenum-vanadium steel with about 0.4C-5Cr-1.3Mo-0.5V, pipes
11/1/1976 - PDF - German - DIN
Learn More€22.99 -
WL 1.7784-5:1976-11
Ultra high-strength chromium-molybdenum-vanadium steel with about 0.4C-5Cr-1.3Mo-0.5V, filler metal
11/1/1976 - PDF - German - DIN
Learn More€22.99 -
WL 1.1144 Beiblatt 1:1976-11
Unalloyed case-hardening steel with about 0,15C, rods and forgings
11/1/1976 - PDF - German - DIN
Learn More€22.99 -
WL 1.1174 Beiblatt 1:1976-11
Unalloyed heat-treatable steel with about 0.35C, rods and forgings
11/1/1976 - PDF - German - DIN
Learn More€22.99 -
WL 1.1194 Beiblatt 1:1976-11
Unalloyed heat-treatable steel with about 0.45C, rods and forgings
11/1/1976 - PDF - German - DIN
Learn More€22.99 -
WL 1.3551:1976-11
Heat-resisting molybdenum-chromium-vanadium roller bearing steel with about 0.8C-4.2Mo-4Cr-1V, rods, wire and forgings
11/1/1976 - PDF - German - DIN
Learn More€22.99 -
WL 1.3551 Beiblatt 1:1976-11
Heat-resisting molybdenum-chromium-vanadium roller bearing steel with about 0.8C-4.2Mo-4Cr-1V, rods, wire and forgings
11/1/1976 - PDF - German - DIN
Learn More€22.99 -
WL 1.4324-2:1976-11
Stainless austenitic chromium-nickel steel with about 0.1C-17Cr-8Ni, spring steel strips
11/1/1976 - PDF - German - DIN
Learn More€22.99 -
BS 2S 129:1976 (R2014)
Specification for 18/9 chromium-nickel corrosion-resisting steel (titanium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm)
8/31/1976 - PDF - English - BSI
Learn More€151.00 -
BS 2S 130:1976 (R2014)
Specification for 18/9 chromium-nickel corrosion-resisting steel (niobium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm)
8/31/1976 - PDF - English - BSI
Learn More€151.00 -
BS 2S 137:1976
Specification for high chromium-nickel corrosion-resisting steel bright bars (free machining) (880-1080 MPa: limiting ruling section 70 mm)
8/31/1976 - PDF - English - BSI
Learn More€151.00 -
BS S 156:1976 (R2014)
Specification for 4% nickel-chromium-molybdenum case-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1320-1520 MPa)
6/30/1976 - PDF - English - BSI
Learn More€151.00 -
BS S 157:1976
Specification. 3% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1180-1380 MPa)
4/30/1976 - PDF - English - BSI
Learn More€151.00 -
BS S 153:1976
Specification. 2½% nickel-chromium-molybdenum steel billets, bars, forgings and parts (1230-1430 MPa: limiting ruling section 40 mm)
3/31/1976 - PDF - English - BSI
Learn More€151.00 -
BS S 154:1976 (R2014)
Specification. 2½% nickel-chromium-molybdenum steel billets, bars, forgings and parts (880-1080 MPa: limiting ruling section 150 mm)
3/31/1976 - PDF - English - BSI
Learn More€151.00 -
ASD-STAN prEN 2035 (12/01/1976)
Round steel bars - drawn - Dimensions - Tolerance h 9
1/12/1976 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2038 (12/01/1976)
Hexagonal steel bars - drawn - Dimensions - Tolerance h 9
1/12/1976 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2039 (12/01/1976)
Rectangular steel bars - drawn - Dimensions - Tolerances h 11 / h 12
1/12/1976 - PDF - English - ASD-STAN
Learn More€25.79 -
ASD-STAN prEN 2041 (12/01/1976)
Square steel bars - drawn - Dimensions - Tolerances h 11 / h 12
1/12/1976 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2042 (12/01/1976)
Square steel bars - rolled - Dimensions - Tolerance js 16
1/12/1976 - PDF - English - ASD-STAN
Learn More€15.10 -
NF L21-106 (01/1975)
Wires for rivets in aluminium alloys, steel, stainless and heat resisting alloys. Dimensions.
1/1/1975 - Paper - French - AFNOR
Learn More€25.67 -
BS HC 106:1974
Specification for precipitaton hardening chromium-nickel-copper corrosion-resisting steel castings (1250-1500 MPa) (Cr 16, Ni 4, Cu 3)
11/29/1974 - PDF - English - BSI
Learn More€151.00 -
BS HC 401:1974
Specification for 18% nickel maraging steel precision castings (1600-1850 MPa)
11/29/1974 - PDF - English - BSI
Learn More€151.00 -
NF L21-203 (11/1974)
Steel rivets. Stainless and heat-resisting alloy rivets. Technical specification.
11/1/1974 - Paper - French - AFNOR
Learn More€60.67 -
BS HR 251:1974
Specification for heat-resisting alloy plate, sheet and strip (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder)
6/28/1974 - PDF - English - BSI
Learn More€151.00 -
BS HC 7:1974
Specification for 3% chromium-molybdenum steel castings (880-1080 MPa)
5/10/1974 - PDF - English - BSI
Learn More€89.00 -
BS HC 10:1974
Specification for nickel-chromium-molybdenum steel castings (1150-1300 MPa)
5/10/1974 - PDF - English - BSI
Learn More€151.00 -
BS HC 103:1974
Specification for 23% chromium-nickel-tungsten corrosion-resisting steel castings (Cr 23, Ni 11, W 3)
5/10/1974 - PDF - English - BSI
Learn More€151.00 -
WL 1.6964 Beiblatt:1973-11
Ultra high-strength stainless maraging chromium-nickel-cobalt-molybdenum steel 0.01C-12Cr-8Ni-5Co-2Mo, rods and forgings
11/1/1973 - PDF - German - DIN
Learn More€22.99 -
LN 9459:1971-01
Cold-rolled strip, carbon or stainless steel for springs, dimensions
1/1/1971 - PDF - German - DIN
Learn More€57.29 -
NF L12-610 (11/1968) (R2008)
Selection of cold drawn seamless steel tubes of circular cross. Section for the aerospace industry.
11/1/1968 - Paper - French - AFNOR
Learn More€34.67 -
BS 2S 93:1964
Specification for aircraft material. '40' carbon steel (normalized) (35/45 tonf/sq in: limiting ruling section 6 in)
7/13/1964 - PDF - English - BSI
Learn More€151.00 -
BS 2S 92:1964
Specification for aircraft material. Carbon-manganese steel (suitable for welding) (40/55 tonf/sq in: limiting ruling section 4 in)
1/31/1964 - PDF - English - BSI
Learn More€151.00 -
NF L22-030 (05/1960) (R1972)
Aircraft fasteners. Steel grades and mechanical properties (rech.).
5/1/1960 - Paper - French - AFNOR
Learn More€25.50 -
ASTM RRE0192
Reference Radiographs for E192 Investment Steel Castings of Aerospace Applications + Active Standard
3/29/2024 - Papier - English - ASTM
Learn More€2,380.00 -
SAE AMS-STD-595A CHIPSET
This publication is to be used for color calibration. This is a complete, boxed set of all 692 AMS- STD-595A color chips, each packaged in separate envelope as described under 'Individual 3X5 color chips'.
3/29/2024 - Papier - English - SAE
Learn More€906.00 -
UNE-EN 3524:2023
Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 2 mm = a = 6 mm - 1 080 MPa = Rm = 1 280 MPa
3/29/2024 - PDF - English - AENOR
Learn More€46.00 -
UNE-EN 3525:2023
Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Plates - 6 mm = a = 20 mm - 1 080 MPa = Rm = 1 280 MPa
3/29/2024 - PDF - English - AENOR
Learn More€46.00 -
UNE-EN 3526:2023
Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 0,5 mm = a = 6 mm - 980 MPa = Rm = 1 180 MPa
3/29/2024 - PDF - English - AENOR
Learn More€46.00