49.025.10 : Steels

Items 1 to 200 of 2323 total

Set Descending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  • ASTM RRE0192

    Reference Radiographs for E192 Investment Steel Castings of Aerospace Applications + Active Standard
    3/29/2024 - Papier - English - ASTM
    Learn More
    €2,380.00

  • SAE AMS-STD-595A CHIPSET

    This publication is to be used for color calibration. This is a complete, boxed set of all 692 AMS- STD-595A color chips, each packaged in separate envelope as described under 'Individual 3X5 color chips'.
    3/29/2024 - Papier - English - SAE
    Learn More
    €906.00

  • UNE-EN 3524:2023

    Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 2 mm = a = 6 mm - 1 080 MPa = Rm = 1 280 MPa
    3/29/2024 - PDF - English - AENOR
    Learn More
    €46.00

  • UNE-EN 3525:2023

    Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Plates - 6 mm = a = 20 mm - 1 080 MPa = Rm = 1 280 MPa
    3/29/2024 - PDF - English - AENOR
    Learn More
    €46.00

  • UNE-EN 3526:2023

    Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 0,5 mm = a = 6 mm - 980 MPa = Rm = 1 180 MPa
    3/29/2024 - PDF - English - AENOR
    Learn More
    €46.00

  • NF L22-030 (05/1960) (R1972)

    Aircraft fasteners. Steel grades and mechanical properties (rech.).
    5/1/1960 - Paper - French - AFNOR
    Learn More
    €25.50

  • BS 2S 92:1964

    Specification for aircraft material. Carbon-manganese steel (suitable for welding) (40/55 tonf/sq in: limiting ruling section 4 in)
    1/31/1964 - PDF - English - BSI
    Learn More
    €151.00

  • BS 2S 93:1964

    Specification for aircraft material. '40' carbon steel (normalized) (35/45 tonf/sq in: limiting ruling section 6 in)
    7/13/1964 - PDF - English - BSI
    Learn More
    €151.00

  • NF L12-610 (11/1968) (R2008)

    Selection of cold drawn seamless steel tubes of circular cross. Section for the aerospace industry.
    11/1/1968 - Paper - French - AFNOR
    Learn More
    €34.67

  • LN 9459:1971-01

    Cold-rolled strip, carbon or stainless steel for springs, dimensions
    1/1/1971 - PDF - German - DIN
    Learn More
    €57.29

  • WL 1.6964 Beiblatt:1973-11

    Ultra high-strength stainless maraging chromium-nickel-cobalt-molybdenum steel 0.01C-12Cr-8Ni-5Co-2Mo, rods and forgings
    11/1/1973 - PDF - German - DIN
    Learn More
    €22.99

  • BS HC 7:1974

    Specification for 3% chromium-molybdenum steel castings (880-1080 MPa)
    5/10/1974 - PDF - English - BSI
    Learn More
    €89.00

  • BS HC 10:1974

    Specification for nickel-chromium-molybdenum steel castings (1150-1300 MPa)
    5/10/1974 - PDF - English - BSI
    Learn More
    €151.00

  • BS HC 103:1974

    Specification for 23% chromium-nickel-tungsten corrosion-resisting steel castings (Cr 23, Ni 11, W 3)
    5/10/1974 - PDF - English - BSI
    Learn More
    €151.00

  • BS HR 251:1974

    Specification for heat-resisting alloy plate, sheet and strip (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder)
    6/28/1974 - PDF - English - BSI
    Learn More
    €151.00

  • NF L21-203 (11/1974)

    Steel rivets. Stainless and heat-resisting alloy rivets. Technical specification.
    11/1/1974 - Paper - French - AFNOR
    Learn More
    €60.67

  • BS HC 106:1974

    Specification for precipitaton hardening chromium-nickel-copper corrosion-resisting steel castings (1250-1500 MPa) (Cr 16, Ni 4, Cu 3)
    11/29/1974 - PDF - English - BSI
    Learn More
    €151.00

  • BS HC 401:1974

    Specification for 18% nickel maraging steel precision castings (1600-1850 MPa)
    11/29/1974 - PDF - English - BSI
    Learn More
    €151.00

  • NF L21-106 (01/1975)

    Wires for rivets in aluminium alloys, steel, stainless and heat resisting alloys. Dimensions.
    1/1/1975 - Paper - French - AFNOR
    Learn More
    €25.67

  • ASD-STAN prEN 2035 (12/01/1976)

    Round steel bars - drawn - Dimensions - Tolerance h 9
    1/12/1976 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2038 (12/01/1976)

    Hexagonal steel bars - drawn - Dimensions - Tolerance h 9
    1/12/1976 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2039 (12/01/1976)

    Rectangular steel bars - drawn - Dimensions - Tolerances h 11 / h 12
    1/12/1976 - PDF - English - ASD-STAN
    Learn More
    €25.79

  • ASD-STAN prEN 2041 (12/01/1976)

    Square steel bars - drawn - Dimensions - Tolerances h 11 / h 12
    1/12/1976 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2042 (12/01/1976)

    Square steel bars - rolled - Dimensions - Tolerance js 16
    1/12/1976 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • BS S 153:1976

    Specification. 2½% nickel-chromium-molybdenum steel billets, bars, forgings and parts (1230-1430 MPa: limiting ruling section 40 mm)
    3/31/1976 - PDF - English - BSI
    Learn More
    €151.00

  • BS S 154:1976 (R2014)

    Specification. 2½% nickel-chromium-molybdenum steel billets, bars, forgings and parts (880-1080 MPa: limiting ruling section 150 mm)
    3/31/1976 - PDF - English - BSI
    Learn More
    €151.00

  • BS S 157:1976

    Specification. 3% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1180-1380 MPa)
    4/30/1976 - PDF - English - BSI
    Learn More
    €151.00

  • BS S 156:1976 (R2014)

    Specification for 4% nickel-chromium-molybdenum case-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1320-1520 MPa)
    6/30/1976 - PDF - English - BSI
    Learn More
    €151.00

  • BS 2S 129:1976 (R2014)

    Specification for 18/9 chromium-nickel corrosion-resisting steel (titanium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm)
    8/31/1976 - PDF - English - BSI
    Learn More
    €151.00

  • BS 2S 130:1976 (R2014)

    Specification for 18/9 chromium-nickel corrosion-resisting steel (niobium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm)
    8/31/1976 - PDF - English - BSI
    Learn More
    €151.00

  • BS 2S 137:1976

    Specification for high chromium-nickel corrosion-resisting steel bright bars (free machining) (880-1080 MPa: limiting ruling section 70 mm)
    8/31/1976 - PDF - English - BSI
    Learn More
    €151.00

  • WL 1.4581:1976-11

    Stainless austenitic chromium-nickel-molybdenum cast steel with about 0.06C-18Cr-12Ni-2.2Mo-0.5Nb, sand and investment casting
    11/1/1976 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4581 Beiblatt 1:1976-11

    Stainless austenitic chromium-nickel-molybdenum cast steel with about 0.06C-18Cr-12Ni-2.2Mo-0.5Nb, sand and investment casting
    11/1/1976 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.7334 Beiblatt 1:1976-11

    Case-hardening molybdenum-chromium steel with about 0.2C-0.45Mo-0.4Cr, rods and forgings
    11/1/1976 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.7784-1:1976-11

    Ultra high-strength chromium-molybdenum-vanadium steel with about 0.4C-5Cr-1.3Mo-0.5V, sheets and plates
    11/1/1976 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.7784-4:1976-11

    Ultra high-strength chromium-molybdenum-vanadium steel with about 0.4C-5Cr-1.3Mo-0.5V, pipes
    11/1/1976 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.7784-5:1976-11

    Ultra high-strength chromium-molybdenum-vanadium steel with about 0.4C-5Cr-1.3Mo-0.5V, filler metal
    11/1/1976 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.1144 Beiblatt 1:1976-11

    Unalloyed case-hardening steel with about 0,15C, rods and forgings
    11/1/1976 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.1174 Beiblatt 1:1976-11

    Unalloyed heat-treatable steel with about 0.35C, rods and forgings
    11/1/1976 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.1194 Beiblatt 1:1976-11

    Unalloyed heat-treatable steel with about 0.45C, rods and forgings
    11/1/1976 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.3551:1976-11

    Heat-resisting molybdenum-chromium-vanadium roller bearing steel with about 0.8C-4.2Mo-4Cr-1V, rods, wire and forgings
    11/1/1976 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.3551 Beiblatt 1:1976-11

    Heat-resisting molybdenum-chromium-vanadium roller bearing steel with about 0.8C-4.2Mo-4Cr-1V, rods, wire and forgings
    11/1/1976 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4324-2:1976-11

    Stainless austenitic chromium-nickel steel with about 0.1C-17Cr-8Ni, spring steel strips
    11/1/1976 - PDF - German - DIN
    Learn More
    €22.99

  • BS 2S 146:1976

    Specification for 4% nickel-chromium-molybdenum air-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1760-1960 MPa: limiting ruling section 100 mm)
    11/30/1976 - PDF - English - BSI
    Learn More
    €151.00

  • BS 2S 147:1976

    Specification for 0.5% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
    11/30/1976 - PDF - English - BSI
    Learn More
    €151.00

  • BS 2S 149:1976 (R2014)

    Specification for 1.75% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
    11/30/1976 - PDF - English - BSI
    Learn More
    €151.00

  • ASD-STAN prEN 2120 (08/01/1977)

    Steel FE-PA12 - Softened And Cold Drawn - Bars And Wires 0,25 mm <= D <= 2,5 mm - Aerospace Series
    1/8/1977 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2227 (08/01/1977)

    Steel FE-PM44 - Hardened and tempered - Hand and die forgings - De <= 150 mm
    1/8/1977 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2228 (08/01/1977)

    Steel FE-PA12 - 500 MPa <= Rm <= 700 MPa - Sheets - 0,5 mm <= a <= 6 mm
    1/8/1977 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2207 (10/01/1977)

    Steel FE-PLl43S - 900 MPa <= Rm <= 1100 MPa - Hand and die forgings De <= 40 mm
    1/10/1977 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2208 (10/01/1977)

    Steel FE-PLl43S - 650 MPa <= Rm <= 850 MPa - Hand and die forgings De <= 150 mm
    1/10/1977 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2210 (10/01/1977)

    Steel FE-PL43S - 650 MPa <= Rm <= 850 MPa - Tubes for structures - 0,5 mm <= a <= 12 mm - D >= 5 a
    1/10/1977 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2211 (10/01/1977)

    Steel FE-PL43S - 900 MPa <= Rm <= 1100 MPa - Tubes for structures - 2 mm <= a <= 12 mm - D >= 5 a
    1/10/1977 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2212 (10/01/1977)

    Steel FE-PL43S - 670 MPa <= Rm <= 870 MPa - Sheets, Strips and plates - 0,5 mm <= a <= 20 mm
    1/10/1977 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2218 (10/01/1977)

    Steel FE-PL52S - 980 MPa <= Rm <= 1180 MPa - Tubes for structures - a <= 4 mm - D >= 5 a
    1/10/1977 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2219 (10/01/1977)

    Steel FE-PL52S - 1030 MPa <= Rm <= 1230 MPa - Tubes for structures - a <= 2 mm - D >= 5 a
    1/10/1977 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2220 (10/01/1977)

    Steel FE-PL52S - 1080 MPa <= Rm <= 1250 MPa - Tubes for structures - 2 mm <= a <= 20 mm - D >= 5 a
    1/10/1977 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2225 (10/01/1977)

    Steel FE-PM32 - Hardened and tempered - Hand and die forgings
    1/10/1977 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2247 (10/01/1977)

    Steel FE-PL43S - 650 MPa <= Rm <= 850 MPa - Tubes for structures - 0,5 mm <= a <= 12 mm d >= 5 a
    1/10/1977 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • BS 3S 91:1977

    Specification for mild steel billets, bars, forgings and parts (suitable for bearing shells)
    4/29/1977 - PDF - English - BSI
    Learn More
    €151.00

  • BS 2S 131:1977

    Specification for high thermal expansion steel billets, bars, forgings and parts (620 MPa: limiting ruling section 150 mm)
    4/29/1977 - PDF - English - BSI
    Learn More
    €151.00

  • BS 2S 142:1977

    Specification for 1% chromium-molybdenum steel billets, bars, forgings and parts (900-1100 MPa: limiting ruling section 40 mm)
    4/29/1977 - PDF - English - BSI
    Learn More
    €151.00

  • BS S 158:1977

    Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
    5/31/1977 - PDF - English - BSI
    Learn More
    €151.00

  • ASD-STAN prEN 2031 (10/01/1977)

    STEEL FE-PL31 - HARDENED AND TEMPERED - BARS - AEROSPACE SERIES
    10/1/1977 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • WL 1.4564-1:1977-12

    Ultra high-strength precipitation-hardening stainless chromium-nickel-aluminium steel with about 0.07C-17Cr-7Ni-1Al, sheets, plates, strips
    12/1/1977 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4574-1:1977-12

    Ultra high-strength precipitation-hardening stainless chromium-nickel-molybdenum-aluminium steel with about 0.07C-15Cr-7Ni-2.5Mo-1Al, sheets, plates and strips
    12/1/1977 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4574-2:1977-12

    Ultra high-strength precipitation-hardening stainless chromium-nickel-molybdenum-aluminium steel with about 0.07C-15Cr-7Ni-2.5Mo-1Al, strain-hardened sheets and strips
    12/1/1977 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4574-3:1977-12

    Ultra high-strength precipitation-hardening stainless chromium-nickel-molybdenum-aluminium steel with about 0.07C-15Cr-7Ni-2.5Mo-1Al, rods and forgings
    12/1/1977 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4984 Beiblatt 1:1977-12

    High temperature austenitic chromium-nickel-molybdenum steel with about 0.07C-16Cr-16Ni-1.8Mo, sheets, rods, forgings and filler metal
    12/1/1977 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4984-2:1978-12

    High temperature austenitic chromium-nickel-molybdenum steel with about 0.07C-16Cr-16Ni-1.8Mo, rods and forgings
    12/1/1978 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4984-3:1978-12

    High temperature austenitic chromium-nickel-molybdenum steel with about 0.07C-16Cr-16Ni-1.8Mo, filler metal.
    12/1/1978 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6964:1978-12

    Ultra high-strength stainless maraging chromium-nickel-cobalt-molybdenum steel 0.01C-12Cr-8Ni-5Co-2Mo, rods and forgings
    12/1/1978 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.7334:1978-12

    Case-hardening molybdenum-chromium steel with about 0.2C-0.45Mo-0.4Cr, rods and forgings
    12/1/1978 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.1144:1978-12

    Unalloyed case-hardening steel with about 0.15C, rods and forgings
    12/1/1978 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.1174:1978-12

    Unalloyed heat-treatable steel with about 0.35C, rods and forgings
    12/1/1978 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.1194:1978-12

    Unalloyed heat-treatable steel with about 0.45C, rods and forgings
    12/1/1978 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.1654 Beiblatt 1:1978-12

    Unalloyed steel with about 1C, polished rods
    12/1/1978 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4984-1:1978-12

    High temperature austenitic chromium-nickel-molybdenum steel with about 0.07C-16Cr-16Ni-1.8Mo, sheets
    12/1/1978 - PDF - German - DIN
    Learn More
    €22.99

  • ASD-STAN prEN 2271 (06/01/1979)

    Steel FE-PM13 S - 1800 MPa <= Rm <= 2000 MPa - Forgings De <= 70 mm - Aerospace Series
    1/6/1979 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2272 (06/01/1979)

    Steel FE-PM13 S - 1550 MPa <= Rm <= 1750 MPa - Forgings De <= 70 mm - Aerospace Series
    1/6/1979 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2273 (06/01/1979)

    Steel FE-PM13 S - 1800 MPa <= Rm <= 2000 MPa - Sheet And Plate a <= 30 mm - Aerospace Series
    1/6/1979 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2312 (06/01/1979)

    STEEL FE-PM42 - Rm >= 1350 MPa - FORGINGS - De <= 100 mm - AEROSPACE SERIES
    1/6/1979 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2313:1979

    STEEL FE-PM42 - Rm >= 1350 MPa - BARS - De <= 100 mm - AEROSPACE SERIES
    1/6/1979 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • WL 1.1654:1979-07

    Unalloyed steel with about 1C, polished rods
    7/1/1979 - PDF - German - DIN
    Learn More
    €22.99

  • DIN 29995:1980-10

    Aerospace, segregation testing on etched slices of remelted steels, nickel and cobalt alloys
    10/1/1980 - PDF - German - DIN
    Learn More
    €39.35

  • ASD-STAN prEN 2447 (01/01/1981)

    Steel FE-PL45 - 1100 MPa <= Rm <= 1300 MPa - Forgings - De <= 25 mm -
    1/1/1981 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2449 (01/01/1981)

    Steel FE-PL45 - 900 MPa <= Rm <= 1100 MPa - Forgings - De <= 40 mm
    1/1/1981 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2451 (01/01/1981)

    Steel FE-PL73 - 1230 MPa <= Rm <= 1420 MPa - Forgings - De <= 40 mm -
    1/1/1981 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2468:1981

    Steel FE-PA11 - Softened - Tubes 0,5 mm <= a <= 5 mm - Aerospace Series
    1/1/1981 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2470 (01/01/1981)

    Steel FE-PA11 - Softened And Cold Drawn - Wires For Rivets 1mm <= D <= 10 mm - Aerospace Series
    1/1/1981 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2471 (01/01/1981)

    Steel FE-PL74 - 1250 MPa <= Rm <= 1450 MPa - Bars De <= 40 mm - Aerospace Series
    1/1/1981 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2476 (01/01/1981)

    Steel FE-PL74 - 1100 MPa <= Rm <= 1300 MPa - Forgings De <= 100 mm - Aerospace Series
    1/1/1981 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2477:1981

    Steel FE-PL75 - 1100 MPa <= Rm <= 1250 MPa - Forgings De <= 100 mm - Aerospace Series
    1/1/1981 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2479:1981

    Steel FE-PL75 - 1250 MPa <= Rm <= 1400 MPa - Forgings De <= 40 mm - Aerospace Series
    1/1/1981 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2494 (06/01/1981)

    Heat Resisting Steel FE-PM38 - 1000MPa <= Rm <= 1140MPa - Forgings - Aerospace Series
    1/6/1981 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • WL 1.3934:1981-03

    Precipitation-hardening nickel-manganese-chromium steel with large thermal expansion, with about 0.7 C-12 Ni-5 Mn-3 Cr-1 V, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.3934 Beiblatt 1:1981-03

    Precipitation-hardening nickel-manganese-chromium steel with large thermal expansion, with about 0.7 C-12 Ni-5 Mn-3 Cr-1 V, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4044:1981-03

    Stainless heat-treatable chromium steel with about 0.2 C-17 Cr-2 Ni, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4044 Beiblatt 1:1981-03

    Stainless heat-treatable chromium steel with about 0.2 C-17 Cr-2Ni, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4911:1981-03

    High temperature heat-treatable chromium-cobalt-molybdenum steel with about 0.1 C-11 Cr-6 Co-0.8 Mo-0.4 Nb-0.4 V, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4911 Beiblatt 1:1981-03

    High temperature heat-treatable chromium-cobalt-molybdenum steel with about 0.1 C-11 Cr-6 Co-0.8 Mo-0.4 Nb-0.4 V, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4914:1981-03

    High temperature heat-treatable chromium-molybdenum steel with about 0.15 C-11 Cr-0.7 Mo-0.4 Nb-0.4 V, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4914 Beiblatt 1:1981-03

    High temperature heat-treatable chromium-molybdenum steel with about 0.15 C-11 Cr-0.7 Mo-0.4 Nb-0.4 V, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4933-1:1981-03

    High temperature heat-treatable chromium-nickel-molybdenum steel with about 0.1 C-12 Cr-2.5 Ni-1.8 Mo-0.3 V, air molten, sheets and strips
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4933-2:1981-03

    High temperature heat-treatable chromium-nickel-molybdenum steel with about 0.1 C-12 Cr-2.5 Ni-1.8 Mo-0.3 V, air molten, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4933 Beiblatt 1:1981-03

    High temperature heat-treatable chromium-nickel-molybdenum steel with about 0.1 C-12 Cr-2.5 Ni-1.8 Mo-0.3 V, air molten, sheets, strips, rods, and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4939-1:1981-03

    High temperature heat-treatable chromium-nickel-molybdenum steel with about 0.1 C-12 Cr-2.5 Ni-1.8 Mo-0.3 V, remelted, sheets and strips
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4939-2:1981-03

    High temperature heat-treatable chromium-nickel-molybdenum steel with about 0.1 C-12 Cr-2.5 Ni-1.8 Mo-0.3 V, remelted, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4939 Beiblatt 1:1981-03

    High temperature heat-treatable chromium-nickel-molybdenum steel with about 0.1 C-12 Cr-2.5 Ni-1.8 Mo-0.3 V, remelted, sheets, strips, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6354:1981-03

    Ultra high-strength maraging nickel-cobalt-molybdenum steel with about 0.01 C-18 Ni-9 Co-5 Mo-0.7 Ti, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6354 Beiblatt 1:1981-03

    Ultra high-strength maraging nickel-cobalt-molybdenum steel with about 0.01 C-18 Ni-9 Co-5 Mo-0.7 Ti, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6359-1:1981-03

    Ultra high-strength maraging nickel-cobalt-molybdenum steel with about 0.01 C-18 Ni-8 Co-5 Mo-0.4 Ti, sheets and plates
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6359-1 Beiblatt 1:1981-03

    Ultra high-strength maraging nickel-cobalt-molybdenum steel with about 0.01 C-18 Ni-8 Co-5 Mo-0.4 Ti, sheets and plates
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6359-2:1981-03

    Ultra high-strength maraging nickel-cobalt-molybdenum steel with about 0.01 C-18 Ni-8 Co-5 Mo-0.4 Ti, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6359-2 Beiblatt 1:1981-03

    Ultra high-strength maraging nickel-cobalt-molybdenum steel with about 0.01 C-18 Ni-8 Co-5 Mo-0.4 Ti, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.8154:1981-03

    Chromium-vanadium steel for springs with about 0.5 C-1 Cr-0.15 V, wire, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.8154 Beiblatt 1:1981-03

    Chromium-vanadium steel for springs with about 0.5 C-1 Cr-0.15 V, wire, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.8514:1981-03

    Chromium-molybdenum-vanadium nitriding steel with about 0.3 C-2.5 Cr-0.2 Mo-0.15 V, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.8514 Beiblatt 1:1981-03

    Chromium-molybdenum-vanadium nitriding steel with about 0.3 C-2.5 Cr-0.2 Mo-0.15 V, rods and forgings
    3/1/1981 - PDF - German - DIN
    Learn More
    €22.99

  • BS S 159:1981 (R2014)

    Specification for 12% chromium-nickel-molybdenum-vanadium heat-resisting steel bars for the manufacture of fasteners (1100-1300 MPa: limiting ruling section 50 mm)
    12/31/1981 - PDF - English - BSI
    Learn More
    €151.00

  • WL 1.3505 Beiblatt 1:1982-03

    Chromium roller bearing steel with about 1C-1.5Cr, rods, wire, forgings and pipes
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.3505-1:1982-03

    Chromium roller bearing steel with about 1C-1.5Cr, rods, wire and forgings
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.3505-2:1982-03

    Chromium roller bearing steel with about 1C-1.5Cr, pipes
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4544 Beiblatt 1:1982-03

    Stainless austenitic chromium-nickel steel with about 0.05C-18Cr-10Ni-0.4Ti, sheets, plates, strips, structural pipes, internal pressure pipes, rods and wire for screws and nuts to be cold-formed or hot-formed
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4544-1:1982-03

    Stainless austenitic chromium-nickel steel with about 0.05C-18Cr-10Ni-0.4Ti, sheets, plates and strips
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4544-2:1982-03

    Stainless austenitic chromium-nickel steel with about 0.05C-18Cr-10Ni-0.4Ti, structural pipes and internal pressure pipes
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4544-3:1982-03

    Stainless austenitic chromium-nickel steel with about 0.05C-18Cr-10Ni-0.4Ti, rods and wire for screws and nuts to be cold-formed or hot-formed
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4546 Beiblatt 1:1982-03

    Stainless austenitic chromium-nickel steel with about 0.05C-18Cr-10Ni-0.6Nb, rods, forgings, seamless pipes and fuse wire
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4546-1:1982-03

    Stainless austenitic chromium-nickel steel with about 0.05C-18Cr-10Ni-0.6Nb, rods and forgings
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4546-2:1982-03

    Stainless austenitic chromium-nickel steel with about 0.05C-18Cr-10Ni-0.6Nb, seamless pipes
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4546-3:1982-03

    Stainless austenitic chromium-nickel steel with about 0.05C-18Cr-10Ni-0.6Nb, fuse wire
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4549:1982-03

    Precipitation-hardening stainless chromium-nickel-copper cast steel with about 0.04C-16Cr-4Ni-3Cu, sand casting and investment casting
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4549 Beiblatt 1:1982-03

    Precipitation-hardening stainless chromium-nickel-copper cast steel with about 0.04C-16Cr-4Ni-3Cu, sand casting and investment casting
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4924:1982-03

    High temperature heat-treatable chromium-molybdenum-vanadium steel casting with about 0.22C-11.5Cr-1Mo-0.3V, sand casting and investment casting
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4934:1982-03

    High temperature heat-treatable chromium-molybdenum-(tungsten)-vanadium steel with about 0.2C-12Cr-1.0Mo-(0.5W)-0.3V, rods and forgings
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4944-1:1982-03

    High temperature precipitation-hardening nickel-chromium-titanium steel with about 0.06C-25Ni-15Cr-2.1Ti-1.2Mo, sheets, strips and plates
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4956:1982-03

    Precipitation-hardening high temperature chromium-nickel-cobalt steel with about 0.08C-21Cr-20Ni-19Co, filler wire
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4956 Beiblatt 1:1982-03

    Precipitation-hardening high temperature chromium-nickel-cobalt steel with about 0.08C-21Cr-20Ni-19Co, filler wire
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4957:1982-03

    Precipitation-hardening high temperature chromium-nickel-cobalt cast steel with about 0.15C-21Cr-20Ni-19Co, investment casting
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4957 Beiblatt 1:1982-03

    Precipitation-hardening high temperature chromium-nickel-cobalt cast steel with about 0.15C-21Cr-20Ni-19Co, investment casting
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4974 Beiblatt 1:1982-03

    Precipitation-hardening high temperature chromium-nickel-cobalt steel with about 0.1C-21Cr-20Ni-19Co, strips, sheets, plates, rods and forgings
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4974-1:1982-03

    Precipitation-hardening high temperature chromium-nickel-cobalt steel with about 0.1C-21Cr-20Ni-19Co, strips, sheets and plates
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6351:1982-03

    Ultra high-strength maraging nickel-cobalt-molybdenum cast steel with about 0.01C-17Ni-10Co-5Mo, precision casting and investment casting
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6351 Beiblatt 1:1982-03

    Ultra high-strength maraging nickel-cobalt-molybdenum cast steel with about 0.01C-17Ni-10Co-5Mo, precision casting and investment casting
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6604 Beiblatt 1:1982-03

    Heat-treatable chromium-nickel-molybdenum steel with about 0.3C-2Cr-2Ni-0.4Mo, rods, forgings and pipes
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6604-1:1982-03

    Heat-treatable chromium-nickel-molybdenum steel with about 0.3C-2Cr-2Ni-0.4Mo, rods and forgings
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6604-2:1982-03

    Heat-treatable chromium-nickel-molybdenum steel with about 0.3C-2Cr-2Ni-0.4Mo, pipes
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.7214 Beiblatt 1:1982-03

    Weldable heat-treatable chromium-molybdenum steel with about 0.25C-1Cr-0.2Mo, sheets, plates, strips, rods, forgings and pipes
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.7214-2:1982-03

    Weldable heat-treatable chromium-molybdenum steel with about 0.25C-1Cr-0.2Mo, rods and forgings
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.7214-3:1982-03

    Weldable heat-treatable chromium-molybdenum steel with about 0.25C-1Cr-0.2Mo, pipes
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.7734 Beiblatt 1:1982-03

    Weldable heat-treatable chromium-molybdenum-vanadium steel with about 0.15C-1.4Cr-0.9Mo-0.25V, sheets, plates, strips, rods, forgings, pipes and filler metal
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.7734-1:1982-03

    Weldable heat-treatable chromium-molybdenum-vanadium steel with about 0.15C-1.4Cr-0.9Mo-0.25V, sheets, plates and strips
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.7734-2:1982-03

    Weldable heat-treatable chromium-molybdenum-vanadium steel with about 0.15C-1.4Cr-0.9Mo-0.25V, rods and forgings
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.7734-3:1982-03

    Weldable heat-treatable chromium-molybdenum-vanadium steel with about 0.15C-1.4Cr-0.9Mo-0.25V, pipes
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.7734-4:1982-03

    Weldable heat-treatable chromium-molybdenum-vanadium steel with about 0.15C-1.4Cr-0.9Mo-0.25V, filler metal
    3/1/1982 - PDF - German - DIN
    Learn More
    €22.99

  • DIN 65038-2:1983-08

    Aerospace, bars of steel, nickel alloys and cobalt alloys for aircraft, technical specification, sampling
    8/1/1983 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 65038-2:1983-08

    Aerospace, bars of steel, nickel alloys and cobalt alloys for aircraft, technical specification, sampling
    8/1/1983 - PDF - English - DIN
    Learn More
    €52.90

  • ASD-STAN prEN 2269 (08/01/1984)

    Steel FE-PM13S - 1800 <= Rm <= 2000 MPa - Bar and wire for fasteners - De <= 70 mm - Aerospace series
    1/8/1984 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2270:1984

    Steel FE-PM13 S - 1550 <= Rm <= 1750 MPa - Bar and wire for fasteners - De <= 70 mm - Aerospace series
    1/8/1984 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2502 (09/01/1984)

    Steel FE-PM66 - 930 MPa <=Rm <= 1080 MPa - Bars De <= 150mm
    1/9/1984 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2503 (09/01/1984)

    Steel FE-PM66 - 930 MPa <= Rm <= 1080 MPa - Forgings De <= 150 mm
    1/9/1984 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • WL 1.4944-2:1984-07

    High temperature precipitation-hardening nickel-chromium-titanium steel with about 0.06C-25Ni-15Cr-2.1Ti-1.2Mo, rods and forgings
    7/1/1984 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4944-3:1984-07

    High temperature precipitation-hardening nickel-chromium-titanium steel with about 0.06C-25Ni-15Cr-2.1Ti-1.2Mo, rods and wire for screws and nuts
    7/1/1984 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4944-2 und -3 Beiblatt 1:1984-07

    High temperature precipitation-hardening nickel-chromium-titanium steel with about 0.06C-25Ni-15Cr-2.1Ti-1.2Mo, rods, forgings, rods and wire for screws and nuts
    7/1/1984 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6944-1:1984-07

    Ultra high-strength nickel-chromium-molybdenum steel with about 0.38C-1.8Ni-0.8Cr-0.35Mo-0.1V, sheets and plates
    7/1/1984 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6944-2:1984-07

    Ultra high-strength nickel-chromium-molybdenum steel with about 0.38C-1.8Ni-0.8Cr-0.35Mo-0.1V, rods and forgings
    7/1/1984 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6944-3:1984-07

    Ultra high-strength nickel-chromium-molybdenum steel with about 0.38C-1.8Ni-0.8Cr-0.35Mo-0.1V, pipes
    7/1/1984 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6944-4:1984-07

    Ultra high-strength nickel-chromium-molybdenum steel with about 0.38C-1.8Ni-0.8Cr-0.35Mo-0.1V, filler metal
    7/1/1984 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.6944 Beiblatt 1:1984-07

    Ultra high-strength nickel-chromium-molybdenum steel with about 0.38C-1.8Ni-0.8Cr-0.35Mo-0,1V, sheets, plates, rods, forgings, pipes, filler metal
    7/1/1984 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.0000 bis 1.9999-40:1984-07

    Steels and high temperature alloys, cross reference list of German material performance sheets (WL) to European standard drafts for air and space transport (prEN)
    7/1/1984 - PDF - German - DIN
    Learn More
    €0.00

  • WL 1.0000 bis 1.9999-41:1984-07

    Steels and high-temperature alloys, cross-reference list of European standard drafts for aerospace transport (prEN) to German material performance sheets (WL)
    7/1/1984 - PDF - German - DIN
    Learn More
    €0.00

  • LN 1544:1985-09

    Cold-rolled carbon steel strip; dimensions
    9/1/1985 - PDF - German - DIN
    Learn More
    €57.29

  • WL 1.4324-2:1985-10

    Aerospace; stainless austenitic chromium-nickel steel with approx. 0,1C-17Cr-8Ni; spring steel strip
    10/1/1985 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4564-1:1985-10

    Aerospace; ultrahigh-strength precipitation hardening stainless chromium-nickel-aluminium steel with approx. 0,07C-17Cr-7Ni-1Al; sheet, plate, strip
    10/1/1985 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4574-1:1985-10

    Aerospace; ultrahigh-strenght precipitation hardening stainless chromium-nickel-molybdenum-aluminium steel with approx. 0,07C-15Cr-7Ni-2,5Mo-1Al; sheet, plate and strip
    10/1/1985 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4574-2:1985-10

    Aerospace; ultrahigh-strength precipitation hardening stainless chromium-nickel-molybdenum-aluminium steel with approx. 0,07C-15Cr-7Ni-2,5Mo-1Al; strain-hardened sheet and strip
    10/1/1985 - PDF - German - DIN
    Learn More
    €22.99

  • WL 1.4574-3:1985-10

    Aerospace; ultrahigh-strenght precipitation hardening stainless chromium-nickel-molybdenum-aluminium steel with approx. 0,07C-15Cr-7Ni-2,5Mo-1Al; bar and forging
    10/1/1985 - PDF - German - DIN
    Learn More
    €22.99

  • LN 175:1985-12

    Round steel, polished, standard tolerance zone h9; dimensions
    12/1/1985 - PDF - German - DIN
    Learn More
    €57.29

  • LN 2076:1985-12

    Aerospace; round spring wire, drawn, stainless steel; dimensions, masses
    12/1/1985 - PDF - German - DIN
    Learn More
    €97.01

  • ASD-STAN prEN 2759 (04/22/1986)

    Steel FE-PL80 - 1900 <= Rm <= 2100 MPa - Forging - De <= 75 mm
    4/22/1986 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2760:1986

    Steel FE-PL78 - 1760 ≤ Rm ≤ 2000 MPa - Bar - De ≤ 75 mm
    4/22/1986 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2761 (04/22/1986)

    Steel FE-PL78 - 1760 <= Rm <= 2000 MPa - Forgings - De <= 75 mm
    4/22/1986 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • ASD-STAN prEN 2776 (04/22/1986)

    Steel FE-P11 - Rm <= 340 MPa - Sheet and strip - a <= 2 mm
    4/22/1986 - PDF - English - ASD-STAN
    Learn More
    €15.10

  • DIN 65021:1986-11

    Aerospace; sheet, plate and strip of steel, nickel alloys and cobalt alloys; technical specification
    11/1/1986 - PDF - German - DIN
    Learn More
    €59.63

  • LN 9093:1986-12

    Aerospace; sealing wire; dimensions, masses
    12/1/1986 - PDF - English, German - DIN
    Learn More
    €97.01

  • LN 671:1987-08

    Aerospace; bright round steel; tolerances according to ISO tolerance class h9; dimensions, masses
    8/1/1987 - PDF - English, German - DIN
    Learn More
    €112.62

  • LN 29557-1:1987-12

    Aerospace; laminated shim of corrosion resisting steel; dimensions, masses
    12/1/1987 - PDF - English, German - DIN
    Learn More
    €97.01

  • ASD-STAN prEN 2767 (03/31/1988)

    Steel FE-PL79 - carburized, hardened and tempered - 1180 <= Rm <= 1550 MPa - bar for machining - De <= 150 mm
    3/31/1988 - PDF - English - ASD-STAN
    Learn More
    €25.79

  • ASD-STAN prEN 2768 (03/31/1988)

    Steel FE-PL79 - carburized, hardened and tempered - 1180 <= Rm <= 1550 MPa - Forgings - De <= 150 mm
    3/31/1988 - PDF - English - ASD-STAN
    Learn More
    €25.79

  • ASD-STAN prEN 2770 (03/31/1988)

    Steel FE-PL53S - hardened and tempered - 1050 <= Rm <= 1220 MPa - Sheet and plate - 0,5 <= a <= 12 mm
    3/31/1988 - PDF - English - ASD-STAN
    Learn More
    €25.79

  • ASD-STAN prEN 2779:1988

    Steel FE-PL56 - hardened and tempered - 1250 ≤ Rm ≤ 1400 MPa - Bar - De ≤ 70 mm
    3/31/1988 - PDF - English - ASD-STAN
    Learn More
    €25.79

  • ASD-STAN prEN 2780 (03/31/1988)

    Steel FE-PL56 - hardened and tempered - 1250 <= Rm <= 1400 MPa - Forging - De <= 70 mm
    3/31/1988 - PDF - English - ASD-STAN
    Learn More
    €25.79

  • ASD-STAN prEN 3363 (03/31/1988)

    Steel FE-CM68 - solution treated - Rm >= 485 MPa - Sand or investment casting
    3/31/1988 - PDF - English - ASD-STAN
    Learn More
    €25.79

  • ASD-STAN prEN 3366 (03/31/1988)

    Steel FE-CM68 - as manufactured - reference heat treatment : solution treated - Remelting stock
    3/31/1988 - PDF - English - ASD-STAN
    Learn More
    €25.79

  • ASD-STAN prEN 3367 (03/31/1988)

    Steel FE-PL10 - hardened, tempered and cold drawn - 1260 <= Rm <= 2790 MPa - Wire for spring - 0,20 <= D <= 10,50 mm
    3/31/1988 - PDF - English - ASD-STAN
    Learn More
    €25.79

  • ASD-STAN prEN 3468 (03/31/1988)

    Steel FE-PA13 softened - 500 <= Rm <= 700 MPa - Forgings - De <= 100 mm
    3/31/1988 - PDF - English - ASD-STAN
    Learn More
    €25.79

  • ASD-STAN prEN 3471 (03/31/1988)

    Steel FE-PA18 - quenched and cold drawn - Strip for spring - a <= 4,0 mm
    3/31/1988 - PDF - English - ASD-STAN
    Learn More
    €25.79

  • ASD-STAN prEN 3478 (03/31/1988)

    Steel FE-PM63 - solution annealed, transformation treated and precipitation hardened - 1310 <= Rm <= 1550 MPa - sheet and strip - a <= 6 mm
    3/31/1988 - PDF - English - ASD-STAN
    Learn More
    €25.79

  • ASD-STAN prEN 3481 (03/31/1988)

    Steel FE-PA13 - annealed - Reference heat treatment : softened - Hollow bars - 5 <= a <= 12 mm
    3/31/1988 - PDF - English - ASD-STAN
    Learn More
    €25.79

  • ASD-STAN prEN 3482 (03/31/1988)

    Steel FE-PA13 - annealed - Reference heat treatment : softened - Forging stock - De <= 100 mm
    3/31/1988 - PDF - English - ASD-STAN
    Learn More
    €25.79

Items 1 to 200 of 2323 total

Set Descending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12