49.025.01 : Materials for aerospace construction in general
-
NBN 384-71:1957
Aéronautique - Canalisations à bord des aéronefs - Code d'identification |Luchtvaart - Pijpleidingen aan boord van luchtvaartuigen - Identificatiecode
11/23/1957 - PDF - French, Dutch - NBN
Learn More€37.00 -
BS M 36:1970 (R2014)
Method for ultrasonic testing of special forgings by an immersion technique using flat-bottomed holes as a reference standard
9/14/1970 - PDF - English - BSI
Learn More€180.00 -
BS M 37:1970
Method for the etch inspection of metallic materials and components
10/30/1970 - PDF - English - BSI
Learn More€151.00 -
ASTM E423-71(2019)
Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
1/1/1971 - PDF - English - ASTM
Learn More€51.00 -
ASTM E423-71(2019) + Redline
Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
1/1/1971 - PDF - English - ASTM
Learn More€61.00 -
BS M 39:1972 (R2014)
Method for penetrant inspection of aerospace materials and components
2/14/1972 - PDF - English - BSI
Learn More€151.00 -
BS M 42:1972
Methods for non-destructive testing of fusion and resistance welds in thin gauge materials
5/19/1972 - PDF - English - BSI
Learn More€151.00 -
ASD-STAN prEN 2397 (05/01/1980)
HEAT RESISTING NICKEL BASE ALLOY NI-P95-HT - COLD WORKED, SOLUTION TREATED AND PRECIPITATION TREATED - BARS FOR FORGED BOLTS D <= 25 mm - AEROSPACE SERIES
1/5/1980 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2366 (01/01/1983)
SHEETS AND STRIPS - HEAT RESISTING ALLOYS - COLD ROLLED - THICKNESS a <= 3 mm - DIMENSIONS - AEROSPACE SERIES
1/1/1983 - PDF - English - ASD-STAN
Learn More€30.19 -
ASD-STAN prEN 2369 (01/01/1983)
WIRES - HEAT RESISTING ALOYS - DIAMETER 0,2 mm <= D <= 8 mm - DIMENSIONS - AEROSPACE SERIES
1/1/1983 - PDF - English - ASD-STAN
Learn More€25.79 -
ASD-STAN prEN 6019 (04/25/1990)
Test methods for metallic materials - Recommended practice for R-curve and Kco determination
4/25/1990 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2002-017 (05/31/1991)
Test methods for metallic materials - Tube used under pressure - Part 17: Integrity test
5/31/1991 - PDF - English - ASD-STAN
Learn More€7.55 -
ASD-STAN prEN 2002-018 (05/31/1991)
Test methods for metallic materials - Part 18: Hydraulic distension test for tube
5/31/1991 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 2002-023 (05/31/1991)
Test methods for metallic materials - Part 23 : Sharp-notch tension testing
5/31/1991 - PDF - English - ASD-STAN
Learn More€15.10 -
NF EN 2310, L10-100 (07/1991)
Aerospace series. Test methods for the flame resistance rating of non-metallic materials. - Série aérospatiale
7/1/1991 - Paper - French - AFNOR
Learn More€70.75 -
€37.38
-
ASD-STAN prEN 3640 (04/30/1992)
Test methods - Heat resisting alloys atomized powder - Procedure for the inspection of loose powder cleanness by water elutriation
4/30/1992 - PDF - English - ASD-STAN
Learn More€30.19 -
ASD-STAN prEN 3641 (04/30/1992)
Test methods - Heat resisting alloys compacted material - Procedure for quantitative determination of thermally induced porosity (T.I.P.)
4/30/1992 - PDF - English - ASD-STAN
Learn More€7.55 -
ASD-STAN TR 3900 (04/26/1993)
Matériaux métalliques - Correspondance entre les systèmes de désignation AECMA
4/26/1993 - PDF - English - ASD-STAN
Learn More€64.31 -
UNE-EN 2310:1993 (R2017)
AEROSPACE SERIES. TEST METHODS FOR THE FLAME RESISTANCE RATING OF NON-METALLIC MATERIALS.
6/24/1993 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 2310:1993 (R2017)
AEROSPACE SERIES. TEST METHODS FOR THE FLAME RESISTANCE RATING OF NON-METALLIC MATERIALS.
6/24/1993 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 2744:1993
AEROSPACE SERIES. NON METALLIC MATERIALS. PREFERRED TEST TEMPERATURES.
6/24/1993 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN 2744:1993
AEROSPACE SERIES. NON METALLIC MATERIALS. PREFERRED TEST TEMPERATURES.
6/24/1993 - PDF - English - AENOR
Learn More€32.40 -
ASD-STAN prEN 2860-02 (10/29/1993)
Heat resisting alloys - Forging stock and forgings - Technical specification - Part 2 : Forging stock
10/29/1993 - PDF - English - ASD-STAN
Learn More€37.38 -
ASD-STAN prEN 3225-01 (10/29/1993)
Heat resisting alloys produced from atomized powder - Powder compacted forging stock and parts - Technical specification : Part 1 : General requirements
10/29/1993 - PDF - English - ASD-STAN
Learn More€64.31 -
ASD-STAN prEN 3225-02 (10/29/1993)
Heat resisting alloys produced from atomized powder - Powder compacted forging stock and parts - Technical specification - Part 2 : Atomized powder
10/29/1993 - PDF - English - ASD-STAN
Learn More€45.29 -
ASD-STAN prEN 3225-03 (10/29/1993)
Heat resisting alloys produced from atomized powder - Powder compacted forging stock and parts - Technical specification - Part 3 : Hot compacted forging stock
10/29/1993 - PDF - English - ASD-STAN
Learn More€37.38 -
ASD-STAN prEN 3225-04 (10/29/1993)
Heat resisting alloys produced from atomized powder - Powder compacted forging stock and parts - Technical specification - Part 4 : Pre-production and production parts
10/29/1993 - PDF - English - ASD-STAN
Learn More€52.83 -
ASD-STAN prEN 3906:1994
Martensitic corrosion resisting steel FE-PM3801 - Air melted - Solution treated - Bar - D <= 50 mm - For the manufacture of fasteners 1100 MPa <= Rm <= 1300 MPa
2/28/1994 - PDF - English - ASD-STAN
Learn More€25.79 -
ASD-STAN prEN 3639 (03/31/1994)
Heat resisting alloy FE-PA2601 - Softened and cold worked - Wire for forged fasteners - D <= 15 mm - 900 MPa <= Rm <= 1100 MPa
3/31/1994 - PDF - English - ASD-STAN
Learn More€25.79 -
ASD-STAN prEN 3762 (03/31/1994)
Heat resisting alloy FE-PA2601 - Softened and cold worked - Wire for forged fasteners - D <= 15 mm - 1100 MPa <= Rm <= 1300 MPa
3/31/1994 - PDF - English - ASD-STAN
Learn More€25.79 -
NBN EN 2032-2:1994
Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition
6/1/1994 - PDF - French - NBN
Learn More€37.00 -
NBN EN 2032-2:1994
Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition
6/1/1994 - PDF - German - NBN
Learn More€37.00 -
NBN EN 2032-2:1994
Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition
6/1/1994 - PDF - English - NBN
Learn More€37.00 -
ASD-STAN prEN 3703 (01/31/1995)
Heat release rate for materials and products under the influence of radiating heat and flames - Test method
1/31/1995 - PDF - English - ASD-STAN
Learn More€115.40 -
ASD-STAN prEN 2657 (06/30/1995)
Heat resisting alloy CO-PH1402 - Consumable electrode remelted - Solution treated - Bar a or D <= 150 mm - Rm >= 860 MPa
6/30/1995 - PDF - English - ASD-STAN
Learn More€25.79 -
ASD-STAN prEN 2658 (06/30/1995)
Heat resisting alloy CO-PH1402 - Consumable electrode remelted - As forged - Forging stock De <= 360 mm
6/30/1995 - PDF - English - ASD-STAN
Learn More€25.79 -
ASD-STAN prEN 2659 (06/30/1995)
Heat resisting alloy CO-PH1402 - Consumable electrode remelted - Solution treated - Forgings De <= 100 mm - Rm >= 860 MPa
6/30/1995 - PDF - English - ASD-STAN
Learn More€25.79 -
ASD-STAN prEN 2660 (06/30/1995)
Heat resisting alloy CO-CH1401 - As cast - Remelting stock
6/30/1995 - PDF - English - ASD-STAN
Learn More€25.79 -
ASD-STAN prEN 2661 (06/30/1995)
Heat resisting alloy CO-PH1402 - Consumable electrode remelted - Solution treated - Sheet and strip a <= 3 mm - Rm >= 860 MPa
6/30/1995 - PDF - English - ASD-STAN
Learn More€25.79 -
ASD-STAN prEN 4244 (06/30/1995)
Heat resisting alloy FE-PM1708 - Vacuum arc remelted - Hardened and tempered - Bar a or D <= 200 mm - 1000 MPa <= Rm <= 1140 MPa
6/30/1995 - PDF - English - ASD-STAN
Learn More€25.79 -
ASD-STAN prEN 4245 (06/30/1995)
Heat resisting alloy FE-PM1708 - Vacuum arc remelted - As forged - Forging stock De <= 300 mm
6/30/1995 - PDF - English - ASD-STAN
Learn More€25.79 -
ASD-STAN prEN 4246 (06/30/1995)
Heat resisting alloy CO-PH4101 - Vacuum melted - As forged - Forging stock De <= 360 mm
6/30/1995 - PDF - English - ASD-STAN
Learn More€25.79 -
ASD-STAN prEN 4260 (01/31/1996)
Metallic materials - Rules for drafting and presentation of technical specifications
1/31/1996 - PDF - English - ASD-STAN
Learn More€76.10 -
UNE-EN 2032-2:1996 (R2018)
AEROSPACE SERIES. METALLIC MATERIALS. PART 2: CODING OF METALLURGICAL CONDITION IN DELIVERY CONDITION.
2/6/1996 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN 2032-2:1996 (R2018)
AEROSPACE SERIES. METALLIC MATERIALS. PART 2: CODING OF METALLURGICAL CONDITION IN DELIVERY CONDITION.
2/6/1996 - PDF - English - AENOR
Learn More€32.40 -
ASD-STAN prEN 2002-020 (02/29/1996)
Test methods for metallic materials - Part 20: Eddy current testing of circular cross-section tubes
2/29/1996 - PDF - English - ASD-STAN
Learn More€68.24 -
ASD-STAN TR 2410:1996
Metallic materials - Relationship between dimensional standards and material standards
2/29/1996 - PDF - English - ASD-STAN
Learn More€178.28 -
ASD-STAN prEN 4500-2 (06/28/1996)
Metallic materials - Rules for drafting and presentation of material standards - Part 2: Specific rules for aluminium, aluminium alloys and magnesium alloys
6/28/1996 - PDF - English - ASD-STAN
Learn More€91.82 -
ASD-STAN prEN 4500-6 (06/28/1996)
Metallic materials - Rules for drafting and presentation of material standards - Part 6: Specific rules for filler metals for brazing
6/28/1996 - PDF - English - ASD-STAN
Learn More€72.17 -
ASD-STAN prEN 4264 (08/30/1996)
Heat resisting alloy FE-PA2501 (X4NiCrMoTi43-13) - As forged - Forging stock - a or D <= 200 mm
8/30/1996 - PDF - English - ASD-STAN
Learn More€30.19 -
ASD-STAN prEN 4261 (11/29/1996)
Metallic materials - Rules for drafting and presentation of test methods standards
11/29/1996 - PDF - English - ASD-STAN
Learn More€68.24 -
ASD-STAN prEN 4061 (12/31/1996)
Amorphous foil in filler metal for brazing - Thickness 25 µm <= a <= 64 µm - Dimensions
12/31/1996 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 4062 (12/31/1996)
Rolled foil in filler metal for brazing - Thickness a <= 1 mm - Dimensions
12/31/1996 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 4063 (12/31/1996)
Wire in filler metal for brazing - Diameter 0,6 mm <= D <= 4 mm - Dimensions
12/31/1996 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 4064 (12/31/1996)
Tape in filler metal for brazing - Thickness 0,075 mm <= a <= 1,5 mm - Dimensions
12/31/1996 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 4066 (12/31/1996)
Borided foil in filler metal for brazing - Thickness 25 µm <= a <= 100 µm - Dimensions
12/31/1996 - PDF - English - ASD-STAN
Learn More€15.10 -
ASD-STAN prEN 3101 (04/30/1997)
Non-metallic materials - Sealants - Test method - Determination of resistance to thermal rupture
4/30/1997 - PDF - English - ASD-STAN
Learn More€45.29 -
ASD-STAN TR 3823 (02/27/1998)
Matériaux pour écrous hexagonaux ordinaires, à créneaux et à freinage interne par bague plastique
2/27/1998 - PDF - English - ASD-STAN
Learn More€68.24 -
ASD-STAN prEN 3874 (04/30/1998)
Test methods for metallic materials - Constant amplitude force-controlled low cycle fatigue testing
4/30/1998 - PDF - English - ASD-STAN
Learn More€111.47 -
ASD-STAN prEN 3988 (04/30/1998)
Test methods for metallic materials - Constant amplitude strain-controlled low cycle fatigue testing
4/30/1998 - PDF - English - ASD-STAN
Learn More€123.26 -
NBN EN 4258:1998
Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use
7/1/1998 - PDF - French - NBN
Learn More€89.00 -
NBN EN 4258:1998
Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use
7/1/1998 - PDF - German - NBN
Learn More€89.00 -
NBN EN 4258:1998
Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use
7/1/1998 - PDF - English - NBN
Learn More€89.00 -
NF EN 4258, L10-020 (08/1998)
Aerospace series. Metallic materials. General organization of standardization. Links between types of EN standards and their use. - Série aérospatiale
8/1/1998 - Paper - French - AFNOR
Learn More€60.67 -
BS EN 4258:1998
Metallic materials. General organization of standardization. Links between types of EN standards and their use
10/15/1998 - PDF - English - BSI
Learn More€151.00 -
UNE-EN 4258:1998
AEROSPACE SERIES. METALLIC MATERIALS. GENERAL ORGANIZATION OF STANDARDIZATION. LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE.
11/5/1998 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 4258:1998
AEROSPACE SERIES. METALLIC MATERIALS. GENERAL ORGANIZATION OF STANDARDIZATION. LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE.
11/5/1998 - PDF - English - AENOR
Learn More€72.00 -
ASD-STAN prEN 6074 (11/30/1998)
Metallic materials - Test methods - Statistical data for material qualification
11/30/1998 - PDF - English - ASD-STAN
Learn More€60.38 -
ASD-STAN TR 3791 (01/31/1999)
Matériaux pour écrous, douilles filetées et filets rapportés à freinage interne par déformation des classes de température <= 425 °C
1/31/1999 - PDF - English - ASD-STAN
Learn More€72.17 -
ASD-STAN prEN 7000-08 (09/30/1999)
Non-metallic materials - Rules for the drafing and presentation of material standards - Part 8: Lightweight cores
9/30/1999 - PDF - English - ASD-STAN
Learn More€83.96 -
NF L17-015 (09/2000)
Aerospace series - Non-metallic materials - Rules for the establishement, the evolutions and the acceptance of quality plans - Série aérospatiale
9/1/2000 - Paper - French - AFNOR
Learn More€60.67 -
BS EN 3506:2001
Aerospace series. Hot rolled sheets and plates in heat resisting alloys. Thickness 2,0 mm = a = 100 mm. Dimensions
10/22/2001 - PDF - English - BSI
Learn More€151.00 -
BS EN 2344:2001
Aerospace series. Round bars, machined in heat resisting alloys. Diameter 10 mm < D < 180 mm. Dimensions
10/23/2001 - PDF - English - BSI
Learn More€151.00 -
NF EN 3506, L12-135 (02/2002)
Aerospaces series - Hot rolled sheets and plates in heat resisting alloys - Thickness a more than or equal to 2,0 mm and less than or equal to 100 mm - Dimensions - Série aérospatiale
2/1/2002 - Paper - English, French - AFNOR
Learn More€68.50 -
NF EN 3848, L10-060 (02/2002)
Aerospace series - Semi-finished metallic products - Methods of measuring form deviations - Série aérospatiale
2/1/2002 - Paper - English, French - AFNOR
Learn More€78.50 -
NF EN 2078, L10-006 (04/2002)
Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval - Série aérospatiale
4/1/2002 - Paper - English, French - AFNOR
Learn More€73.23 -
BS ISO 14624-4:2003
Space systems. Safety and compatibility of materials Determination upward flammability in pressurized gaseous oxygen or oxygen-enriched environments
1/15/2004 - PDF - English - BSI
Learn More€180.00 -
NF EN 2002-001, L10-007-001 (04/2006)
Aerospace series - Metallic materials - Test methods - Part 001 : tensile testing at ambient temperature - Série aérospatiale
4/1/2006 - Paper - English, French - AFNOR
Learn More€107.50 -
NF EN 2002-002, L10-007-002 (04/2006)
Aerospace series - Metallic materials - Test methods - Part 002 : tensile testing at elevated temperature - Série aérospatiale
4/1/2006 - Paper - English, French - AFNOR
Learn More€107.50 -
BS ISO 14624-6:2006
Space systems. Safety and compatibility of materials Determination reactivity processing with aerospace fluids
5/31/2006 - PDF - English - BSI
Learn More€180.00 -
BS ISO 14624-7:2006
Space systems. Safety and compatibility of materials Determination permeability penetration to aerospace fluids
5/31/2006 - PDF - English - BSI
Learn More€180.00 -
€70.00
-
€40.00
-
ASD-STAN TR 9536 (03/31/2008)
Aerospace series - Declarable Substances Recommended Practice
3/31/2008 - PDF - English - ASD-STAN
Learn More€40.00 -
UNE-EN 4632-001:2008 (R2018)
Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements (Endorsed by AENOR in June of 2008.)
6/1/2008 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN 4632-002:2008 (R2018)
Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys (Endorsed by AENOR in June of 2008.)
6/1/2008 - PDF - English - AENOR
Learn More€74.00 -
UNE-EN 2950:2008 (R2018)
Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects (Endorsed by AENOR in October of 2008.)
10/1/2008 - PDF - English - AENOR
Learn More€84.00 -
NF EN 4632-001, L06-380-001 (11/2008)
Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001 : General requirements - Série aérospatiale
11/1/2008 - Paper - English, French - AFNOR
Learn More€98.00 -
NBN EN 4632-002:2008
Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys
11/26/2008 - PDF - German - NBN
Learn More€142.00 -
NBN EN 4632-001:2008
Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements
11/26/2008 - PDF - German - NBN
Learn More€89.00 -
NBN EN 2950:2008
Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects
11/26/2008 - PDF - German - NBN
Learn More€163.00 -
NBN EN 4632-002:2008
Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys
11/26/2008 - PDF - English - NBN
Learn More€142.00 -
NBN EN 4632-001:2008
Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements
11/26/2008 - PDF - English - NBN
Learn More€89.00 -
NBN EN 2950:2008
Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects
11/26/2008 - PDF - English - NBN
Learn More€163.00 -
ASTM E1559-09(2022)
Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
1/1/2009 - PDF - English - ASTM
Learn More€57.00 -
ASTM E1559-09(2022) + Redline
Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
1/1/2009 - PDF - English - ASTM
Learn More€68.00 -
DIN EN 4632-002:2009-06
Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys, German and English version EN 4632-002:2008
6/1/2009 - PDF - English, German - DIN
Learn More€110.00 -
DIN EN 2950:2009-06
Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects, German and English version EN 2950:2008
6/1/2009 - PDF - English, German - DIN
Learn More€136.82 -
DIN EN 4632-001:2009-07
Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements, German and English version EN 4632-001:2008
7/1/2009 - PDF - English, German - DIN
Learn More€79.72 -
BS EN 2950:2008
Aerospace series. Test method. Wrought heat resisting alloys Semifinished products and parts. Conditions for macrographic and micrographic examination. Atlas of structures and defects
7/31/2009 - PDF - English - BSI
Learn More€331.00 -
BS EN 4632-001:2008
Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability brazeability of materials General requirements
7/31/2009 - PDF - English - BSI
Learn More€180.00 -
BS EN 4632-002:2008
Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability brazeability of materials Homogeneous aluminium alloys
9/30/2009 - PDF - English - BSI
Learn More€293.00 -
UNE-EN 3987:2009 (R2018)
Aerospace series - Test methods for metallic materials - Constant amplitude force-controlled high cycle fatigue testing (Endorsed by AENOR in November of 2009.)
11/1/2009 - PDF - English - AENOR
Learn More€68.00 -
NBN EN 3987:2010
Aerospace series - Test methods for metallic materials - Constant amplitude force-controlled high cycle fatigue testing
11/20/2009 - PDF - German - NBN
Learn More€121.00 -
NBN EN 3987:2010
Aerospace series - Test methods for metallic materials - Constant amplitude force-controlled high cycle fatigue testing
11/20/2009 - PDF - English - NBN
Learn More€121.00 -
BS EN 3987:2009
Aerospace series. Test methods for metallic materials. Constant amplitude force-controlled high cycle fatigue testing
11/30/2009 - PDF - English - BSI
Learn More€250.00 -
ASD-STAN TR AMS2750-FR (12/15/2009)
Aerospace series - Aerospace material specification - Pyrometry
12/15/2009 - PDF - French - ASD-STAN
Learn More€186.14 -
DIN EN 3987:2010-01
Aerospace series - Test methods for metallic materials - Constant amplitude force-controlled high cycle fatigue testing, German and English version EN 3987:2009
1/1/2010 - PDF - English, German - DIN
Learn More€126.26 -
UNE-EN 4632-005:2009
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 005: Homogeneous assemblies of heat resisting Ni or Co base alloys (Endorsed by AENOR in January of 2010.)
1/1/2010 - PDF - English - AENOR
Learn More€80.00 -
BS 2HC 100:2010 (R2015)
Procedure for inspection, testing and acceptance of iron, nickel, copper, cobalt and refractory metal base alloy castings
1/31/2010 - PDF - English - BSI
Learn More€293.00 -
NBN EN 4632-005:2010
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 005: Homogeneous assemblies of heat resisting Ni or Co base alloys
2/19/2010 - PDF - German - NBN
Learn More€163.00 -
NBN EN 4632-005:2010
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 005: Homogeneous assemblies of heat resisting Ni or Co base alloys
2/19/2010 - PDF - English - NBN
Learn More€163.00 -
BS EN 4632-005:2009
Aerospace series. Weldability and brazeability of materials in aerospace constructions Homogeneous assemblies heat resisting Ni or Co base alloys
3/31/2010 - PDF - English - BSI
Learn More€331.00 -
FD L00-026 (04/2010)
Aerospace industry - Metallic materials - Relationship between AIR standards and EN standards - Industrie aérospatiale
4/1/2010 - Paper - French - AFNOR
Learn More€144.50 -
UNE-EN 4632-003:2010
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels (Endorsed by AENOR in May of 2010.)
5/1/2010 - PDF - English - AENOR
Learn More€71.00 -
NBN EN 4632-003:2010
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels
5/19/2010 - PDF - German - NBN
Learn More€142.00 -
NBN EN 4632-003:2010
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels
5/19/2010 - PDF - English - NBN
Learn More€142.00 -
DIN EN 4632-003:2010-09
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels, German and English version EN 4632-003:2010
9/1/2010 - PDF - English, German - DIN
Learn More€99.35 -
DIN EN 4632-005:2010-10
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 005: Homogeneous assemblies of heat resisting Ni or Co base alloys, German and English version EN 4632-005:2009
10/1/2010 - PDF - English, German - DIN
Learn More€120.84 -
€101.00
-
UNE-EN 4678:2011 (R2017)
Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments (Endorsed by AENOR in September of 2011.)
9/1/2011 - PDF - English - AENOR
Learn More€72.00 -
ASTM E1234-12(2020)
Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
1/1/2012 - PDF - English - ASTM
Learn More€51.00 -
ASTM E1234-12(2020) + Redline
Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
1/1/2012 - PDF - English - ASTM
Learn More€61.00 -
12/30260906 DC:2012
BS EN 4711. Aerospace series. Screw, 12-point flange head (bi hexagonal head bolt), long thread, for tensile applications, continuous fibre reinforced-PEEK composite, temperature range -65°C to 135°C. Inch series
2/27/2012 - PDF - English - BSI
Learn More€24.00 -
12/30260907 DC:2012
BS EN 4712. Aerospace series. Nuts, 12-point flange, self-locking, continuous fibre reinforced-PEEK composite, temperature range -65%0DC to 135°C. Inch series
2/27/2012 - PDF - English - BSI
Learn More€24.00 -
12/30260908 DC:2012
BS EN 4713. Aerospace series. Nuts, anchor, self-locking, floating. Continuous fibre reinforced PEEK composite, temperature range -65°C to 135°C. Inch series
2/27/2012 - PDF - English - BSI
Learn More€24.00 -
12/30260913 DC:2012
BS EN 4717. Aerospace series. Polyetherketone with 55 % continuous carbon fibre by volume (PEEK-CF55)
2/27/2012 - PDF - English - BSI
Learn More€24.00 -
12/30260914 DC:2012
BS EN 4718. Aerospace series. Polyetherketone with 55 % continuous glass fibre by volume (PEEK-GF55)
2/27/2012 - PDF - English - BSI
Learn More€24.00 -
12/30263035 DC:2012
BS EN 4825. Aerospace series. Steel X12CrNiMoV12-3 (1.4933). Air melted and consumable electrode remelted. Hardened and tempered. Bar. De = 150 mm. 900 MPa = Rm = 1100 MPa
4/5/2012 - PDF - English - BSI
Learn More€24.00 -
SAE AIR 5065A:2012-05-09
Influence of Grain Flow on Bolt Integrity (Stabilized: May 2012)
5/9/2012 - PDF - English - SAE
Learn More€89.00 -
UNE-EN 4677-001:2012 (R2018)
Aerospace series - Welded and brazed assemblies for aerospace construction - Joints of metallic materials by electron beam welding - Part 001: Quality of welded assemblies (Endorsed by AENOR in July of 2012.)
7/1/2012 - PDF - English - AENOR
Learn More€72.00 -
12/30268169 DC:2012
BS EN 8.4567. Aerospace series. Aluminium alloy AL-P7010. T76. Extruded bars. 150 mm < D = 250 mm
7/9/2012 - PDF - English - BSI
Learn More€24.00 -
BS 4HR 100:2010+A1:2012
Aerospace series. Procedure for inspection, testing and acceptance of wrought heat-resisting alloys
7/31/2012 - PDF - English - BSI
Learn More€348.00 -
12/30272549 DC:2012
BS EN 4013. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification: 1550 MPa (at ambient temperature)/600°C
9/26/2012 - PDF - English - BSI
Learn More€24.00 -
UNE-EN 3718:2012
Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
10/24/2012 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 3718:2012
Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
10/24/2012 - PDF - English - AENOR
Learn More€72.00 -
BS EN 4632-004:2012
Aerospace series. Weldability and brazeability of materials in aerospace constructions Welding brazing homogeneous assemblies high alloyed steels
10/31/2012 - PDF - English - BSI
Learn More€293.00 -
PD ISO/TS 16697:2012
Space systems. Safety and compatibility of materials. Method to determine the flammability thresholds of materials
10/31/2012 - PDF - English - BSI
Learn More€180.00 -
ASTM E1235-12(2020)e1
Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
11/1/2012 - PDF - English - ASTM
Learn More€57.00 -
ASTM E1235-12(2020)e1 + Redline
Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
11/1/2012 - PDF - English - ASTM
Learn More€68.00 -
UNE-EN 4632-004:2012 (R2018)
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels (Endorsed by AENOR in November of 2012.)
11/1/2012 - PDF - English - AENOR
Learn More€75.00 -
12/30275353 DC:2012
BS EN 4641-301. Aerospace series. Cables, optical 125µm diameter cladding Part 301. Tight structure 50-125 µm GI fibre nominal 1.8 mm Outside Diameter. Product Standard
11/22/2012 - PDF - English - BSI
Learn More€24.00 -
NBN EN 4632-004:2012
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
11/23/2012 - PDF - French - NBN
Learn More€142.00 -
NBN EN 4632-004:2012
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
11/23/2012 - PDF - German - NBN
Learn More€142.00 -
NBN EN 4632-004:2012
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
11/23/2012 - PDF - English - NBN
Learn More€142.00 -
13/30281822 DC:2013
BS EN 4604-010. Aerospace series. Cable, electrical, for signal transmission. Part 010. Cable, coaxial, light weight, 50 Ohms, 200 °C, type KX (light WD). Product standard
3/22/2013 - PDF - English - BSI
Learn More€24.00 -
BS EN 4632-006:2013
Aerospace series. Weldability and brazeability of materials in aerospace constructions Homogeneous assemblies titanium alloys
4/30/2013 - PDF - English - BSI
Learn More€250.00 -
UNE-EN 4632-006:2013
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 006: Homogeneous assemblies of titanium alloys (Endorsed by AENOR in May of 2013.)
5/1/2013 - PDF - English - AENOR
Learn More€70.00 -
NBN EN 4632-006:2013
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 006: Homogeneous assemblies of titanium alloys
6/21/2013 - PDF - German - NBN
Learn More€142.00 -
NBN EN 4632-006:2013
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 006: Homogeneous assemblies of titanium alloys
6/21/2013 - PDF - English - NBN
Learn More€142.00 -
13/30287472 DC:2013
BS EN 3155-008. Aerospace series. Electrical contacts used in elements of connection. Part 008. Contacts, electrical, male, type A, crimp, class S. Product standard
7/10/2013 - PDF - English - BSI
Learn More€24.00 -
13/30288691 DC:2013
BS EN 4071. Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1 100 MPa (at ambient temperature) / 425 °C
8/2/2013 - PDF - English - BSI
Learn More€24.00 -
BS EN 4262:2013
Aerospace series. Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20). As forged. Forging stock. a or D = 200 mm - 690 MPa = Rm = 880MPa
8/31/2013 - PDF - English - BSI
Learn More€151.00 -
BS EN 4263:2013
Aerospace series. Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20). As forged. Forging stock. a or D = 200 mm - 690 MPa = Rm = 960MPa
8/31/2013 - PDF - English - BSI
Learn More€151.00 -
13/30290592 DC:2013
BS EN 6111. Aerospace series. Ethylene-propylene elastomer (EPM/EPDM) Hardness 80 IRHD for static seal elements in hydraulic systems for long-term application. Material standard
9/13/2013 - PDF - English - BSI
Learn More€24.00 -
NBN EN 4263:2013
Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ? 200 mm - 690 MPa ? Rm ? 960MPa
9/20/2013 - PDF - French - NBN
Learn More€58.00 -
NBN EN 4263:2013
Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ? 200 mm - 690 MPa ? Rm ? 960MPa
9/20/2013 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4263:2013
Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D = 200 mm - 690 MPa = Rm = 960MPa
9/20/2013 - PDF - English - NBN
Learn More€58.00 -
NBN EN 4262:2013
Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ? 200 mm - 690 MPa ? Rm ? 880MPa
9/20/2013 - PDF - French - NBN
Learn More€58.00 -
NBN EN 4262:2013
Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ? 200 mm - 690 MPa ? Rm ? 880MPa
9/20/2013 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4262:2013
Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D = 200 mm - 690 MPa = Rm = 880MPa
9/20/2013 - PDF - English - NBN
Learn More€58.00 -
DIN EN 4632-004:2013-11
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels, German version EN 4632-004:2012
11/1/2013 - PDF - German - DIN
Learn More€99.35 -
DIN EN 4632-006:2013-11
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 006: Homogeneous assemblies of titanium alloys, German version EN 4632-006:2013
11/1/2013 - PDF - German - DIN
Learn More€85.79 -
13/30294318 DC:2013
BS 2591-326. Aerospace series. Elements of electrical and optical connection. Test methods. Part 326. Fuel fire immersion and containment
11/21/2013 - PDF - English - BSI
Learn More€24.00 -
13/30294617 DC:2013
BS EN 4531-002. Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Part 002. Specification of performance and contact arrangements
11/27/2013 - PDF - English - BSI
Learn More€24.00 -
13/30295375 DC:2013
BS EN 4654-003. Aerospace series. Connectors, electrical. Part 003. Inserts with PC tails electrical contacts. Technical report
12/13/2013 - PDF - English - BSI
Learn More€24.00 -
13/30295376 DC:2013
BS EN 4654-010. Aerospace series. Connectors, electrical. Part 010. 1Q18 connectors. Technical report
12/13/2013 - PDF - English - BSI
Learn More€24.00 -
13/30295377 DC:2013
BS EN 4654-200. Aerospace series. Connectors, electrical. Part 200. Size 8 male quadrax contact pc tails
12/13/2013 - PDF - English - BSI
Learn More€24.00 -
DIN EN 4262:2014-01
Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D200 mm - 690 MPa R <(Index)m> 880 MPa, German and English version EN 4262:2013
1/1/2014 - PDF - English, German - DIN
Learn More€52.90 -
DIN EN 4263:2014-01
Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D200 mm - 690 MPa R <(Index)m> 960 MPa, German and English version EN 4263:2013
1/1/2014 - PDF - English, German - DIN
Learn More€52.90 -
14/30297676 DC:2014
BS EN AFCB-3P-003. Aerospace series. Arc Fault Circuit breakers, three-pole, temperature compensated, rated currents 3 A to 25 A, switching capacity 65 In Part 003. Without auxiliary contacts. Product standard
2/7/2014 - PDF - English - BSI
Learn More€24.00 -
14/30297686 DC:2014
BS EN AFCB-1P-001. Aerospace series. Arc Fault Circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A, 115Vac 400 Hz constant frequency. Part 001. Technical specification
2/7/2014 - PDF - English - BSI
Learn More€24.00 -
14/30297688 DC:2014
BS EN AFCB-1P-004. Aerospace series. Arc Fault Circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A, 115Vac 400 Hz. With signal contact. Product standard
2/7/2014 - PDF - English - BSI
Learn More€24.00 -
14/30297689 DC:2014
BS EN AFCB-1P-005. Aerospace series. Arc Fault Circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A, 115Vac 400 Hz. Part 005. With polarized signal contact. Product standard
2/7/2014 - PDF - English - BSI
Learn More€24.00 -
14/30298727 DC:2014
BS EN 3155-024. Aerospace series. Electrical contacts used in elements of connection. Part 024. Contacts, electrical, triaxial, size 8, male, type D, crimp, class S. Product standard
2/25/2014 - PDF - English - BSI
Learn More€24.00 -
14/30298728 DC:2014
BS EN 3155-025. Aerospace series. Electrical contacts used in elements of connection. Part 025. Contacts, electrical, triaxial, size 8, female, type D, crimp, class S. Product standard
2/25/2014 - PDF - English - BSI
Learn More€24.00 -
BS ISO 16691:2014
Space systems. Thermal control coatings for spacecraft. General requirements
2/28/2014 - PDF - English - BSI
Learn More€250.00 -
DIN EN 4632-004 Berichtigung 1:2014-03
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels, German version EN 4632-004:2012, Corrigendum to DIN EN 4632-004:2013-11
3/1/2014 - PDF - German - DIN
Learn More€0.00 -
14/30300809 DC:2014
BS EN 2943. Aerospace series. Inserts, screw thread, helical coil, self-locking. Technical specification
4/3/2014 - PDF - English - BSI
Learn More€24.00 -
14/30300810 DC:2014
BS EN 2944. Aerospace series. Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
4/3/2014 - PDF - English - BSI
Learn More€24.00 -
14/30300811 DC:2014
BS EN 3542. Aerospace series. Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy Ni-PH2801 (Inconel X750)
4/3/2014 - PDF - English - BSI
Learn More€24.00 -
14/30300825 DC:2014
BS EN 4706. Aerospace series. LED colour and brightness ranking
4/4/2014 - PDF - English - BSI
Learn More€24.00 -
14/30301120 DC:2014
BS EN 4677-001. Aerospace series. Welded and brazed assemblies for aerospace constructions. Joints of metallic materials by electron beam welding. Part 001. Quality of welded assemblies
4/14/2014 - PDF - English - BSI
Learn More€24.00 -
14/30301115 DC:2014
BS EN 3207. Aerospace series. Rubber compounds. Technical specification
4/14/2014 - PDF - English - BSI
Learn More€24.00 -
€86.00
-
UNE-EN 2032-001:2014
Aerospace series - Metallic materials - Part 001: Conventional designation (Endorsed by AENOR in October of 2014.)
10/1/2014 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 16602-70-01:2014
Space product assurance - Cleanliness and contamination control (Endorsed by AENOR in November of 2014.)
11/1/2014 - PDF - English - AENOR
Learn More€111.00 -
UNE-EN 16602-70-02:2014
Space product assurance - Thermal vacuum outgassing test for the screening of space materials (Endorsed by AENOR in November of 2014.)
11/1/2014 - PDF - English - AENOR
Learn More€80.00 -
14/30317094 DC:2014
BS EN 3197. Aerospace series. Design and installation of aircraft electrical and optical interconnection systems
11/21/2014 - PDF - English - BSI
Learn More€43.00 -
NBN EN 16602-70-36:2014
Space product assurance - Material selection for controlling stress-corrosion cracking
11/28/2014 - PDF - English - NBN
Learn More€163.00 -
NBN EN 16602-70-45:2014
Space product assurance - Mechanical testing of metallic materials
11/28/2014 - PDF - French - NBN
Learn More€142.00 -
NBN EN 16602-70-22:2014
Space product assurance - Control of limited shelf-life materials
11/28/2014 - PDF - French - NBN
Learn More€89.00 -
NBN EN 16602-70-22:2014
Space product assurance - Control of limited shelf-life materials
11/28/2014 - PDF - English - NBN
Learn More€89.00 -
NBN EN 16602-70-21:2014
Space product assurance - Flammability testing for the screening of space materials
11/28/2014 - PDF - English - NBN
Learn More€163.00 -
NBN EN 16602-70-37:2014
Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking
11/28/2014 - PDF - French - NBN
Learn More€142.00 -
NBN EN 16602-70-37:2014
Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking
11/28/2014 - PDF - English - NBN
Learn More€142.00 -
NBN EN 16602-70-45:2014
Space product assurance - Mechanical testing of metallic materials
11/28/2014 - PDF - English - NBN
Learn More€142.00 -
BS EN 16602-70-21:2014
Space product assurance. Flammability testing for the screening of space materials
11/30/2014 - PDF - English - BSI
Learn More€348.00 -
BS EN 16602-70-22:2014
Space product assurance. Control of limited shelf-life materials
11/30/2014 - PDF - English - BSI
Learn More€180.00