49.025 : Materials for aerospace construction

Items 8401 to 8561 of 8561 total

Set Ascending Direction
per page

List  Grid 

  • BS S 157:1976

    Specification. 3% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1180-1380 MPa)
    4/30/1976 - PDF - English -
    Learn More
    €151.00

  • BS S 153:1976

    Specification. 2½% nickel-chromium-molybdenum steel billets, bars, forgings and parts (1230-1430 MPa: limiting ruling section 40 mm)
    3/31/1976 - PDF - English -
    Learn More
    €151.00

  • BS S 154:1976 (R2014)

    Specification. 2½% nickel-chromium-molybdenum steel billets, bars, forgings and parts (880-1080 MPa: limiting ruling section 150 mm)
    3/31/1976 - PDF - English -
    Learn More
    €151.00

  • ASD-STAN prEN 2054 (12/01/1976)

    U-section aluminium alloy folded profiles with externally lipped flanges - Dimensions
    1/12/1976 - PDF - English -
    Learn More
    €15.10

  • ASD-STAN prEN 2059 (12/01/1976)

    Top hat section aluminium alloy folded profiles - Dimensions
    1/12/1976 - PDF - English -
    Learn More
    €15.10

  • ASD-STAN prEN 2042 (12/01/1976)

    Square steel bars - rolled - Dimensions - Tolerance js 16
    1/12/1976 - PDF - English -
    Learn More
    €15.10

  • ASD-STAN prEN 2051 (12/01/1976)

    L-section aluminium alloy folded profiles - Dimensions
    1/12/1976 - PDF - English -
    Learn More
    €15.10

  • ASD-STAN prEN 2057 (12/01/1976)

    Z-section aluminium alloy folded profiles with one lipped flange - Dimensions
    1/12/1976 - PDF - English -
    Learn More
    €15.10

  • ASD-STAN prEN 2039 (12/01/1976)

    Rectangular steel bars - drawn - Dimensions - Tolerances h 11 / h 12
    1/12/1976 - PDF - English -
    Learn More
    €25.79

  • ASD-STAN prEN 2055 (12/01/1976)

    U-section aluminium alloy folded profiles with internally lipped flanges - Dimensions
    1/12/1976 - PDF - English -
    Learn More
    €15.10

  • ASD-STAN prEN 2060 (12/01/1976)

    Bowler hat section aluminium alloy folded profiles - Dimensions
    1/12/1976 - PDF - English -
    Learn More
    €15.10

  • ASD-STAN prEN 2035 (12/01/1976)

    Round steel bars - drawn - Dimensions - Tolerance h 9
    1/12/1976 - PDF - English -
    Learn More
    €15.10

  • ASD-STAN prEN 2052 (12/01/1976)

    L-section aluminium alloy folded profiles with internally lipped flanges - Dimensions
    1/12/1976 - PDF - English -
    Learn More
    €15.10

  • ASD-STAN prEN 2058 (12/01/1976)

    Z-section aluminium alloy folded profiles with lipped flanges - Dimensions
    1/12/1976 - PDF - English -
    Learn More
    €15.10

  • ASD-STAN prEN 2041 (12/01/1976)

    Square steel bars - drawn - Dimensions - Tolerances h 11 / h 12
    1/12/1976 - PDF - English -
    Learn More
    €15.10

  • ASD-STAN prEN 2056 (12/01/1976)

    Z-section aluminium alloy folded profiles - Dimensions
    1/12/1976 - PDF - English -
    Learn More
    €15.10

  • ASD-STAN prEN 2061 (12/01/1976)

    Top hat section - aluminium alloy folded profiles with lipped flanges - Dimensions
    1/12/1976 - PDF - English -
    Learn More
    €15.10

  • ASD-STAN prEN 2038 (12/01/1976)

    Hexagonal steel bars - drawn - Dimensions - Tolerance h 9
    1/12/1976 - PDF - English -
    Learn More
    €15.10

  • WL 5.2204:1975-11

    Plastics, cast polyamide (PA) 6
    11/1/1975 - PDF - German -
    Learn More
    €22.99

  • WL 5.2203:1975-11

    Plastics, polyamide (PA) 6
    11/1/1975 - PDF - German -
    Learn More
    €22.99

  • WL 5.2212:1975-11

    Plastics, polyamide (PA) 612
    11/1/1975 - PDF - German -
    Learn More
    €22.99

  • WL 8.4321:1975-11

    Preimpregnated filament fabric of 8.4565.6, 8.4567.6 or 8.4568.6 and epoxy resin compound (prepreg), applicable from -55 to +80 °C
    11/1/1975 - PDF - German -
    Learn More
    €22.99

  • WL 5.2206:1975-11

    Plastics, polyamide (PA) 66 with 35 weight percent of glass fibre
    11/1/1975 - PDF - German -
    Learn More
    €22.99

  • WL 5.2210:1975-11

    Plastics, polyamide (PA) 12
    11/1/1975 - PDF - German -
    Learn More
    €22.99

  • BS HC 206:1975

    Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy precision castings (Cr 20, Co 20, Mo 6, Ti 2)
    9/30/1975 - PDF - English -
    Learn More
    €151.00

  • BS L 119:1975

    Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2, Sb 0.2)
    9/30/1975 - PDF - English -
    Learn More
    €151.00

  • NF L21-110 (09/1975)

    Wires for rivets in T40 pure titanium. Technical specification.
    9/1/1975 - Paper - French -
    Learn More
    €48.00

  • LN 65626:1975-04

    Hollow sections, rectangular, of aluminium, for workshop facilities, dimensions, masses
    4/1/1975 - PDF - German -
    Learn More
    €57.29

  • NF L21-107 (03/1975)

    Wires for rivets in T40 pure titanium. Dimensions.
    3/1/1975 - Paper - French -
    Learn More
    €25.50

  • ASD-STAN prEN 2002-003 (12/01/1975)

    Test methods for metallic materials - Part 3 : Load calibration of tensile testing machines
    1/12/1975 - PDF - English -
    Learn More
    €7.55

  • ASD-STAN prEN 2002-004 (12/01/1975)

    Test methods for metallic materials - Part 4 : Calibration of dynamometric calibration devices
    1/12/1975 - PDF - English -
    Learn More
    €7.55

  • NF L21-106 (01/1975)

    Wires for rivets in aluminium alloys, steel, stainless and heat resisting alloys. Dimensions.
    1/1/1975 - Paper - French -
    Learn More
    €25.67

  • NF L18-510/AM1 (01/1975)

    Sheets made of transparent plastics material.
    1/1/1975 - Paper - French -
    Learn More
    €25.50

  • BS HC 106:1974

    Specification for precipitaton hardening chromium-nickel-copper corrosion-resisting steel castings (1250-1500 MPa) (Cr 16, Ni 4, Cu 3)
    11/29/1974 - PDF - English -
    Learn More
    €151.00

  • BS HC 401:1974

    Specification for 18% nickel maraging steel precision castings (1600-1850 MPa)
    11/29/1974 - PDF - English -
    Learn More
    €151.00

  • LN 53283:1974-11

    Testing of adhesives for metals, determination of the shear strength of single lap joints by tensile test
    11/1/1974 - PDF - German -
    Learn More
    €57.29

  • LN 53289:1974-11

    Testing of adhesives for metals, floating roller peel test
    11/1/1974 - PDF - German -
    Learn More
    €80.65

  • NF L21-203 (11/1974)

    Steel rivets. Stainless and heat-resisting alloy rivets. Technical specification.
    11/1/1974 - Paper - French -
    Learn More
    €60.67

  • LN 53292:1974-11

    Testing of adhesives for metallic honeycomb sandwiches, flatwise tensile test
    11/1/1974 - PDF - German -
    Learn More
    €80.65

  • LN 53295:1974-11

    Testing of adhesives for metallic honeycomb sandwiches, climbing drum peel test
    11/1/1974 - PDF - German -
    Learn More
    €80.65

  • WL 3.7114-2:1974-07

    Titanium alloy, TiAl5Sn2, rods and forgings
    7/1/1974 - PDF - German -
    Learn More
    €22.99

  • WL 3.7114-1:1974-07

    Titanium alloy, TiAl5Sn2, sheets, strips and plates
    7/1/1974 - PDF - German -
    Learn More
    €22.99

  • BS HR 251:1974

    Specification for heat-resisting alloy plate, sheet and strip (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder)
    6/28/1974 - PDF - English -
    Learn More
    €151.00

  • LN 29507:1974-06

    Components of fibre reinforced moulding materials, deviations for dimensions without indication of tolerances
    6/1/1974 - PDF - German -
    Learn More
    €57.29

  • BS HC 103:1974

    Specification for 23% chromium-nickel-tungsten corrosion-resisting steel castings (Cr 23, Ni 11, W 3)
    5/10/1974 - PDF - English -
    Learn More
    €151.00

  • BS HC 7:1974

    Specification for 3% chromium-molybdenum steel castings (880-1080 MPa)
    5/10/1974 - PDF - English -
    Learn More
    €89.00

  • BS HC 10:1974

    Specification for nickel-chromium-molybdenum steel castings (1150-1300 MPa)
    5/10/1974 - PDF - English -
    Learn More
    €151.00

  • WL 3.1924-5:1974-04

    Aluminium wrought alloy, Al-Cu2MgNi, smith hammer forgings
    4/1/1974 - PDF - German -
    Learn More
    €22.99

  • WL 3.1924-2:1974-04

    Aluminium wrought alloy, Al-Cu2MgNi, rods
    4/1/1974 - PDF - German -
    Learn More
    €22.99

  • WL 3.1924-4:1974-04

    Aluminium wrought alloy, Al-Cu2MgNi, drop forgings
    4/1/1974 - PDF - German -
    Learn More
    €22.99

  • WL 3.1924-1:1974-04

    Aluminium wrought alloy, Al-Cu2MgNi, plates
    4/1/1974 - PDF - German -
    Learn More
    €22.99

  • WL 3.7174-1:1973-12

    Titanium alloy, TiAl6V6Sn2, sheets, strips and plates
    12/1/1973 - PDF - German -
    Learn More
    €22.99

  • WL 5.5890:1973-12

    FPM elastomer, high temperature resistant, oil-resisting, cross-linked
    12/1/1973 - PDF - German -
    Learn More
    €22.99

  • WL 1.6964 Beiblatt:1973-11

    Ultra high-strength stainless maraging chromium-nickel-cobalt-molybdenum steel 0.01C-12Cr-8Ni-5Co-2Mo, rods and forgings
    11/1/1973 - PDF - German -
    Learn More
    €22.99

  • LN 29765:1973-10

    Ultrasonic testing of aluminium alloys products
    10/1/1973 - PDF - German -
    Learn More
    €57.29

  • NF L15-641 (09/1973) (R2008)

    Rectangular drawn tubes in aluminium alloys.
    9/1/1973 - Paper - French -
    Learn More
    €25.67

  • NF L15-640 (09/1973) (R2008)

    Square drawn tubes in aluminium alloys.
    9/1/1973 - Paper - French -
    Learn More
    €25.67

  • LN 29936-4 Beiblatt:1973-08

    Reinforced plastics, calculation of material properties for products of glass fibre reinforced plastics
    8/1/1973 - PDF - German -
    Learn More
    €178.79

  • NF L15-570 (08/1973) (R2008)

    Zed sections in aluminium alloys.
    8/1/1973 - Paper - French -
    Learn More
    €34.67

  • LN 29936-1:1973-08

    Reinforced plastics, general, introduction, summary
    8/1/1973 - PDF - German -
    Learn More
    €80.65

  • NF L15-115 (08/1973) (R2008)

    Aluminium alloy sheet.
    8/1/1973 - Paper - French -
    Learn More
    €48.00

  • LN 29936-4:1973-08

    Reinforced plastics, design details for parts made of fibre reinforced plastics
    8/1/1973 - PDF - German -
    Learn More
    €178.79

  • NF L15-560 (08/1973) (R2008)

    Omega sections in aluminium alloys.
    8/1/1973 - Paper - French -
    Learn More
    €34.67

  • WL 5.3632:1973-05

    Laminated products, plates, pressed, of laminated phenol-formaldehyde resin fabric
    5/1/1973 - PDF - German -
    Learn More
    €22.99

  • WL 5.3630-3:1973-05

    Laminated products, pipes, moulded, of laminated phenol-formaldehyde resin fabric
    5/1/1973 - PDF - German -
    Learn More
    €22.99

  • WL 5.3630-1:1973-05

    Laminated products, plates, pressed, of laminated phenol-formaldehyde resin fabric
    5/1/1973 - PDF - German -
    Learn More
    €22.99

  • WL 5.3631-2:1973-05

    Laminated products, round plain specimen, moulded, of laminated phenol-formaldehyde resin paper
    5/1/1973 - PDF - German -
    Learn More
    €22.99

  • WL 5.3630-4:1973-05

    Laminated products, pipes, rolled, of laminated phenol-formaldehyde resin fabric
    5/1/1973 - PDF - German -
    Learn More
    €22.99

  • WL 5.3630-2:1973-05

    Laminated products, round plain specimen, moulded, of laminated phenol-formaldehyde resin fabric
    5/1/1973 - PDF - German -
    Learn More
    €22.99

  • WL 5.1104:1973-05

    Laminated products, laminated polytetrafluoroethylene-resin fabrics
    5/1/1973 - PDF - German -
    Learn More
    €22.99

  • WL 5.3631-1:1973-05

    Laminated products, plates, pressed, of laminated phenol-formaldehyde resin paper
    5/1/1973 - PDF - German -
    Learn More
    €22.99

  • NF L15-512 (04/1973) (R2008)

    Extruded angles, equal and unequal legs, in aluminium alloys.
    4/1/1973 - Paper - French -
    Learn More
    €25.67

  • NF L15-612 (04/1973) (R2008)

    Drawn tubes of circular section in aluminium alloys. Precision tubes.
    4/1/1973 - Paper - French -
    Learn More
    €34.67

  • NF L15-540 (04/1973) (R2008)

    Extruded tee sections in aluminium alloys.
    4/1/1973 - Paper - French -
    Learn More
    €25.67

  • NF L15-520 (04/1973) (R2008)

    Beaded extrusions in aluminium alloys.
    4/1/1973 - Paper - French -
    Learn More
    €25.67

  • NF L15-611 (04/1973) (R2008)

    Drawn tubes of circular section in aluminium alloys. Common tolerances.
    4/1/1973 - Paper - French -
    Learn More
    €34.67

  • NF L15-530 (04/1973) (R2008)

    Extruded channels in aluminium alloys.
    4/1/1973 - Paper - French -
    Learn More
    €25.67

  • BS L 513:1973

    Specification for forging stock and forgings of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0)
    3/15/1973 - PDF - English -
    Learn More
    €151.00

  • BS HC 301:1973

    Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5)
    2/2/1973 - PDF - English -
    Learn More
    €151.00

  • WL 5.2000-2:1972-11

    Unsaturated polyester (UP) resins for moulding materials, general application, properties in the test specimen
    11/1/1972 - PDF - German -
    Learn More
    €22.99

  • NF L15-312 (09/1972) (R2012)

    Round drawn bars in aluminium alloys.
    9/1/1972 - Paper - French -
    Learn More
    €25.67

  • NF L15-332 (09/1972) (R2012)

    Extruded and drawn square bars in aluminium alloys.
    9/1/1972 - Paper - French -
    Learn More
    €25.67

  • NF L15-314 (09/1972) (R2012)

    Extruded round bars in aluminium alloys.
    9/1/1972 - Paper - French -
    Learn More
    €25.67

  • NF L15-113 (09/1972) (R2012)

    Aluminium alloy sheet. Tolerance on total surface thickness.
    9/1/1972 - Paper - French -
    Learn More
    €25.67

  • NF L15-340 (09/1972) (R2012)

    Extruded flat bars in aluminium alloys.
    9/1/1972 - Paper - French -
    Learn More
    €25.67

  • NF L15-322 (09/1972) (R2012)

    Hexagon drawn bars in aluminium alloys.
    9/1/1972 - Paper - French -
    Learn More
    €25.67

  • WL 4.3854:1972-08

    Sintered bronze, highly graphitic, plumbiferous, very high volume ratio
    8/1/1972 - PDF - German -
    Learn More
    €22.99

  • WL 4.3852:1972-08

    Sintered bronze, highly graphitic, heat-treated
    8/1/1972 - PDF - German -
    Learn More
    €22.99

  • WL 4.3853:1972-08

    Sintered bronze, graphitic and plumbiferous
    8/1/1972 - PDF - German -
    Learn More
    €22.99

  • WL 4.3851:1972-08

    Sintered bronze, graphitic, heat-treated
    8/1/1972 - PDF - German -
    Learn More
    €22.99

  • NF L21-201 (07/1972) (R2012)

    Aluminium alloy rivets. Product standard.
    7/1/1972 - Paper - French -
    Learn More
    €60.67

  • BS M 42:1972

    Methods for non-destructive testing of fusion and resistance welds in thin gauge materials
    5/19/1972 - PDF - English -
    Learn More
    €151.00

  • BS 2L 99:1972

    Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and precipitation treated) (Si 7, Mg 0.3)
    3/30/1972 - PDF - English -
    Learn More
    €151.00

  • BS M 39:1972 (R2014)

    Method for penetrant inspection of aerospace materials and components
    2/14/1972 - PDF - English -
    Learn More
    €151.00

  • LN 9120-68:1972-01

    Materials and semi-finished products, adhesive for plastics, survey
    1/1/1972 - PDF - German -
    Learn More
    €57.29

  • BS L 112:1971 (R2014)

    Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
    9/30/1971 - PDF - English -
    Learn More
    €151.00

  • BS L 111:1971 (R2016)

    Specification for bars and extruded sections of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
    9/30/1971 - PDF - English -
    Learn More
    €151.00

  • BS 3L 63:1971

    Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
    8/31/1971 - PDF - English -
    Learn More
    €151.00

  • BS L 105:1971

    Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
    8/31/1971 - PDF - English -
    Learn More
    €151.00

  • BS L 102:1971

    Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
    8/31/1971 - PDF - English -
    Learn More
    €151.00

  • BS 2L 95:1971

    Specification for plate of aluminium-zinc-magnesium-copper-chromium alloy (solution treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)
    8/31/1971 - PDF - English -
    Learn More
    €151.00

  • BS 2L 77:1971

    Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
    8/31/1971 - PDF - English -
    Learn More
    €151.00

  • BS 2L 93:1971 (R2013)

    Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
    8/31/1971 - PDF - English -
    Learn More
    €151.00

  • ASTM E423-71(2019) + Redline

    Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
    1/1/1971 - PDF - English -
    Learn More
    €61.00

  • LN 9459:1971-01

    Cold-rolled strip, carbon or stainless steel for springs, dimensions
    1/1/1971 - PDF - German -
    Learn More
    €57.29

  • ASTM E423-71(2019)

    Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
    1/1/1971 - PDF - English -
    Learn More
    €51.00

  • BS M 37:1970

    Method for the etch inspection of metallic materials and components
    10/30/1970 - PDF - English -
    Learn More
    €151.00

  • BS M 36:1970 (R2014)

    Method for ultrasonic testing of special forgings by an immersion technique using flat-bottomed holes as a reference standard
    9/14/1970 - PDF - English -
    Learn More
    €180.00

  • BS 2L 128:1970

    Specification for ingots and castings of magnesium-zinc-cerium-zirconium alloy (precipitation treated) (Zn 4.5, rare earth metals 1.2, Zr 0.7)
    3/26/1970 - PDF - English -
    Learn More
    €151.00

  • BS 3L 122:1970

    Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8, Zn 0.5, Mn 0.3)
    3/26/1970 - PDF - English -
    Learn More
    €151.00

  • BS 2L 126:1970

    Specification for ingots and castings of magnesium-cerium-zinc-zirconium alloy (precipitation treated) (rare earth metals 3.0, Zn 2.3, Zr 0.6)
    3/26/1970 - PDF - English -
    Learn More
    €151.00

  • NF L15-621 (11/1969) (R2004)

    Copper tubes of circular section for high pressure oxygen systems.
    11/1/1969 - Paper - French -
    Learn More
    €25.50

  • LN 29636:1969-05

    Specific gravity of glass fiber reinforced plastic laminates with different glass content
    5/1/1969 - PDF - German -
    Learn More
    €57.29

  • NF L18-510 (02/1969)

    Sheets made of transparent plastics material.
    2/1/1969 - Paper - French -
    Learn More
    €25.67

  • NF L18-200 (12/1968) (R2008)

    Acceptance conditions for graphite products for exhaust nozzles.
    12/1/1968 - Paper - French -
    Learn More
    €48.00

  • NF L15-501 (12/1968) (R2008)

    General tolerances on aluminium alloy extruded sections.
    12/1/1968 - Paper - French -
    Learn More
    €48.00

  • NF L12-610 (11/1968) (R2008)

    Selection of cold drawn seamless steel tubes of circular cross. Section for the aerospace industry.
    11/1/1968 - Paper - French -
    Learn More
    €34.67

  • BS 2S 93:1964

    Specification for aircraft material. '40' carbon steel (normalized) (35/45 tonf/sq in: limiting ruling section 6 in)
    7/13/1964 - PDF - English -
    Learn More
    €151.00

  • WL 5.5517:1964-06

    Vulcanized rubber, internal rubber for oxygen hoses
    6/1/1964 - PDF - German -
    Learn More
    €22.99

  • BS 2S 92:1964

    Specification for aircraft material. Carbon-manganese steel (suitable for welding) (40/55 tonf/sq in: limiting ruling section 4 in)
    1/31/1964 - PDF - English -
    Learn More
    €151.00

  • UNE 28017-8:1961

    TRACTION AND ELONGATION TESTS IN AIRCRAFT FABRICS.
    10/15/1961 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28017-6:1961

    OBTETION OF TEST SAMPLES IN AIRCRAFT FABRICS.
    6/15/1961 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28017-7:1961

    DETERMINATION OF THE WEIGHT OF FABRICS USED IN AIRCRAFT.
    6/15/1961 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28017-5:1961

    COTTON AND LINEN FABRICS USED IN AIRCRAFT.
    6/15/1961 - PDF - Spanish -
    Learn More
    €14.00

  • LN 9047:1961-06

    Testing of notched-bar tensile strength of titanium alloys (Pratt and Whitney test)
    6/1/1961 - PDF - German -
    Learn More
    €57.29

  • WL 2.4374-1:1961-03

    Nickel-copper wrought alloy, NiCu30Al, creep-resistant (K-Monel) (for bars and forged pieces)
    3/1/1961 - PDF - German -
    Learn More
    €32.34

  • WL 2.4374-2:1961-03

    Nickel-copper wrought alloy, NiCu30Al, creep-resistant, filler metal (K-Monel)
    3/1/1961 - PDF - German -
    Learn More
    €22.99

  • WL 2.4370:1961-03

    Nickel-copper wrought alloy, NiCu30Ti, creep-resistant, filler metal (Monel 60)
    3/1/1961 - PDF - German -
    Learn More
    €22.99

  • UNE 28017-10:1961

    CONDITIONING OF FABRICS USED IN AIRCRAFT, TO DETERMINE ITS CHARACTERISTICS.
    2/15/1961 - PDF - Spanish -
    Learn More
    €14.00

  • NF L22-030 (05/1960) (R1972)

    Aircraft fasteners. Steel grades and mechanical properties (rech.).
    5/1/1960 - Paper - French -
    Learn More
    €25.50

  • BS 2F 52:1959

    Flax reinforcement webbing for aeronautical purposes
    10/31/1959 - PDF - English -
    Learn More
    €151.00

  • UNE 28017-3:1958

    DETERMINATION OF FINISH AND WASTE MATERIALS IN FABRICS FOR AIRCRAFT.
    10/15/1958 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28017-1:1958

    AIRCRAFT FABRIC. CLASSIFICATION, CHARACTERISTICS, RECEPTION AND MAINTENANCE.
    10/15/1958 - PDF - Spanish -
    Learn More
    €17.00

  • UNE 28017-4:1958

    DETERMINATION OF PROHIBITED MATTERS IN FABRICS FOR AIRCRAFT.
    10/15/1958 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28017-2:1958

    DETERMINATION OF THE NATURE OF FIBERS IN FABRICS FOR AIRCRAFT LINING.
    10/15/1958 - PDF - Spanish -
    Learn More
    €14.00

  • NF L15-130 (10/1958)

    Tôles en titane - Dimensions et tolérances.
    10/1/1958 - Paper - French -
    Learn More
    €25.50

  • NBN 384-71:1957

    Aéronautique - Canalisations à bord des aéronefs - Code d'identification |Luchtvaart - Pijpleidingen aan boord van luchtvaartuigen - Identificatiecode
    11/23/1957 - PDF - French, Dutch -
    Learn More
    €37.00

  • UNE 28012-5:1956

    WOODS USED IN AIRCRAFT. TANGENTIAL STATIC FLEXION TEST.
    10/15/1956 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28012-4:1956

    WOODS USED IN AIRCRAFT. TANGENTIAL DYNAMIC FLEXION TEST.
    10/15/1956 - PDF - Spanish -
    Learn More
    €14.00

  • NBN 381-21:1955

    Aéronautique - Alliages d'aluminium pour construction aéronautique - Alliages pour rivets |Luchtvaart - Aluminium legeringen voor luchtvaartbouw - Legeringen voor klinknagels
    8/13/1956 - PDF - French, Dutch -
    Learn More
    €37.00

  • UNE 28015:1955

    WOODS USED IN AIRCRAFT. RECEPTION.
    2/15/1955 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28014:1955

    WOODS USED IN AIRCRAFT. EXTRALIGHT WOODS. CHARACTERISTICS.
    2/15/1955 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28012-9:1955

    WOODS USED IN AIRCRAFT. RADIAL TRACTION TEST.
    2/15/1955 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28012-7:1955

    WOODS USED IN AIRCRAFT. ELASTICITY TEST.
    1/15/1955 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28012-8:1955

    WOODS USED IN AIRCRAFT. AXIAL TRACTION TEST.
    1/15/1955 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28012-2:1954

    WOODS USED IN AIRCRAFT. APPARENT DENSITY. TEST.
    11/15/1954 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28013:1954

    WOODS FOR GIRATORY SCREWS AND WINGS. CHARACTERISTICS.
    11/15/1954 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28012-3:1954

    WOODS USED IN AIRCRAFT. VOLUMETRIC CONCENTRATION TEST.
    11/15/1954 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28012-1:1954

    WOODS USED IN AIRCRAFT. DETERMINATION OF HUMIDITY.
    5/15/1954 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28012-6:1954

    WOODS USED IN AIRCRAFT. AXIAL COMPRESSION TEST.
    3/15/1954 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28011:1953

    WOODS USED IN AIRCRAFT. CHARACTERISTICS.
    12/15/1953 - PDF - Spanish -
    Learn More
    €14.00

  • UNE 28010:1953

    WOODS USED IN AIRCRAFT. GENERALITIES.
    12/15/1953 - PDF - Spanish -
    Learn More
    €14.00

  • BS M 22:1949

    Specification for silica gel acid activated for aircraft purposes
    10/17/1949 - PDF - English -
    Learn More
    €151.00

  • UNE-EN 3526:2023

    Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 0,5 mm = a = 6 mm - 980 MPa = Rm = 1 180 MPa
    3/29/2024 - PDF - English -
    Learn More
    €46.00

  • UNE-EN 3524:2023

    Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 2 mm = a = 6 mm - 1 080 MPa = Rm = 1 280 MPa
    3/29/2024 - PDF - English -
    Learn More
    €46.00

  • UNE-EN 3311:2023

    Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bars for machining - D = 300 mm - 900 MPa = Rm = 1 160 MPa
    3/29/2024 - PDF - English -
    Learn More
    €42.00

  • SAE AMS-STD-595A CHIPSET

    This publication is to be used for color calibration. This is a complete, boxed set of all 692 AMS- STD-595A color chips, each packaged in separate envelope as described under 'Individual 3X5 color chips'.
    3/29/2024 - Papier - English -
    Learn More
    €906.00

  • UNE-EN 4881:2023

    Aerospace series - Micro-arc oxidation of aluminium and aluminium alloys (Endorsed by Asociación Española de Normalización in December of 2023.)
    3/29/2024 - PDF - English -
    Learn More
    €69.00

  • UNE-EN 3525:2023

    Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Plates - 6 mm = a = 20 mm - 1 080 MPa = Rm = 1 280 MPa
    3/29/2024 - PDF - English -
    Learn More
    €46.00

  • UNE-EN 6042:2023

    Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy (Endorsed by Asociación Española de Normalización in February of 2024.)
    3/29/2024 - PDF - English -
    Learn More
    €70.00

  • ASTM RRE0192

    Reference Radiographs for E192 Investment Steel Castings of Aerospace Applications + Active Standard
    3/29/2024 - Papier - English -
    Learn More
    €2,380.00

Items 8401 to 8561 of 8561 total

Set Ascending Direction
per page

List  Grid