49.025 : Materials for aerospace construction
-
DIN EN 4721:2014-12
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De200 mm - 900 MPa Rm 1050 MPa, German and English version EN 4721:2014
12/1/2014 - PDF - English, German - DIN
Learn More€52.90 -
DIN EN 4720:2014-12
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De200 mm - 1150 MPa Rm 1300 MPa, German and English version EN 4720:2014
12/1/2014 - PDF - English, German - DIN
Learn More€52.90 -
DIN EN 4630:2014-12
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - D <(Index)e>200 mm - 900 MPa R <(Index)m> 1050 MPa, German and English version EN 4630:2014
12/1/2014 - PDF - English, German - DIN
Learn More€52.90 -
NF EN 2030, L10-593 (12/2014)
Aerospace series - Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De
12/1/2014 - Paper - English, French - AFNOR
Learn More€43.50 -
UNE-EN 4721:2014
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De <= 200 mm - 900 MPa <= Rm <= 1 050 MPa (Endorsed by AENOR in December of 2014.)
12/1/2014 - PDF - English - AENOR
Learn More€38.00 -
UNE-EN 4720:2014
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De <= 200 mm - 1 150 MPa <= Rm <= 1 300 MPa (Endorsed by AENOR in December of 2014.)
12/1/2014 - PDF - English - AENOR
Learn More€38.00 -
UNE-EN 4630:2014
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De <= 200 mm - 900 MPa <= Rm <= 1 050 MPa (Endorsed by AENOR in December of 2014.)
12/1/2014 - PDF - English - AENOR
Learn More€38.00 -
UNE-EN 2278:2014
Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa <= Rm <= 1 100 MPa - Bars - De <= 150 mm (Endorsed by AENOR in December of 2014.)
12/1/2014 - PDF - English - AENOR
Learn More€38.00 -
DIN EN 2512:2014-12
Aerospace series - Aluminium alloy AL-P7175 - T7351 - Plate - 6 mm < a100 mm, German and English version EN 2512:2014
12/1/2014 - PDF - English, German - DIN
Learn More€79.72 -
UNE-EN 4725:2014
Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T351 - Plate - 6 mm < a <= 150 mm (Endorsed by AENOR in December of 2014.)
12/1/2014 - PDF - English - AENOR
Learn More€38.00 -
SAE AMS 2242G:2020-10-21
Tolerances Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and Plate
12/1/2014 - PDF - English - SAE
Learn More€87.00 -
NF EN 2833-005, L17-740-005 (12/2014)
Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005 : glass fabric/phenolic resin preimpregnate - Série aérospatiale
12/1/2014 - Paper - English, French - AFNOR
Learn More€53.00 -
BS EN 16602-70-21:2014
Space product assurance. Flammability testing for the screening of space materials
11/30/2014 - PDF - English - BSI
Learn More€348.00 -
BS EN 16602-70-22:2014
Space product assurance. Control of limited shelf-life materials
11/30/2014 - PDF - English - BSI
Learn More€180.00 -
BS EN 16602-70-45:2014
Space product assurance. Mechanical testing of metallic materials
11/30/2014 - PDF - English - BSI
Learn More€293.00 -
BS EN 16602-70-37:2014
Space product assurance. Determination of the susceptibility of metals to stress-corrosion cracking
11/30/2014 - PDF - English - BSI
Learn More€293.00 -
BS EN 4725:2014
Aerospace series. Aluminium alloy AL-P2024- Al Cu4Mg1. T351. Plate. 6 mm < a = 150 mm
11/30/2014 - PDF - English - BSI
Learn More€151.00 -
BS 3B 27:2009
Specification for copper-zinc-aluminium-nickel-silicon alloy tube
11/30/2014 - PDF - English - BSI
Learn More€151.00 -
NBN EN 16602-70-36:2014
Space product assurance - Material selection for controlling stress-corrosion cracking
11/28/2014 - PDF - English - NBN
Learn More€163.00 -
NBN EN 16602-70-45:2014
Space product assurance - Mechanical testing of metallic materials
11/28/2014 - PDF - French - NBN
Learn More€142.00 -
NBN EN 16602-70-22:2014
Space product assurance - Control of limited shelf-life materials
11/28/2014 - PDF - French - NBN
Learn More€89.00 -
NBN EN 16602-70-22:2014
Space product assurance - Control of limited shelf-life materials
11/28/2014 - PDF - English - NBN
Learn More€89.00 -
NBN EN 16602-70-21:2014
Space product assurance - Flammability testing for the screening of space materials
11/28/2014 - PDF - English - NBN
Learn More€163.00 -
NBN EN 16602-70-37:2014
Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking
11/28/2014 - PDF - French - NBN
Learn More€142.00 -
NBN EN 16602-70-37:2014
Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking
11/28/2014 - PDF - English - NBN
Learn More€142.00 -
NBN EN 16602-70-45:2014
Space product assurance - Mechanical testing of metallic materials
11/28/2014 - PDF - English - NBN
Learn More€142.00 -
NBN EN 4630:2014
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ? 200 mm - 900 MPa ? Rm ? 1 050 MPa
11/28/2014 - PDF - French - NBN
Learn More€58.00 -
NBN EN 4630:2014
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ? 200 mm - 900 MPa ? Rm ? 1 050 MPa
11/28/2014 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4721:2014
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ? 200 mm - 900 MPa ? Rm ? 1 050 MPa
11/28/2014 - PDF - French - NBN
Learn More€58.00 -
NBN EN 4721:2014
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ? 200 mm - 900 MPa ? Rm ? 1 050 MPa
11/28/2014 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4720:2014
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ? 200 mm - 1 150 MPa ? Rm ? 1 300 MPa
11/28/2014 - PDF - French - NBN
Learn More€58.00 -
NBN EN 4720:2014
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ? 200 mm - 1 150 MPa ? Rm ? 1 300 MPa
11/28/2014 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2278:2014
Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa ? Rm ? 1 100 MPa - Bars - De ? 150 mm
11/28/2014 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2278:2014
Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa ? Rm ? 1 100 MPa - Bars - De ? 150 mm
11/28/2014 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4630:2014
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De = 200 mm - 900 MPa = Rm = 1 050 MPa
11/28/2014 - PDF - English - NBN
Learn More€58.00 -
NBN EN 4721:2014
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De = 200 mm - 900 MPa = Rm = 1 050 MPa
11/28/2014 - PDF - English - NBN
Learn More€58.00 -
NBN EN 4720:2014
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De = 200 mm - 1 150 MPa = Rm = 1 300 MPa
11/28/2014 - PDF - English - NBN
Learn More€58.00 -
NBN EN 2278:2014
Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa = Rm = 1 100 MPa - Bars - De = 150 mm
11/28/2014 - PDF - English - NBN
Learn More€58.00 -
NBN EN 2512:2014
Aerospace series - Aluminium alloy AL-P7175 - T7351 - Plate - 6mm < a ? 100 mm
11/28/2014 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2512:2014
Aerospace series - Aluminium alloy AL-P7175 - T7351 - Plate - 6mm < a ? 100 mm
11/28/2014 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2512:2014
Aerospace series - Aluminium alloy AL-P7175 - T7351 - Plate - 6mm < a = 100 mm
11/28/2014 - PDF - English - NBN
Learn More€58.00 -
SAE AS 1260A:2014-11-25
Equivalent Sections of Certain Shapes to Round Bars (Stabilized: Nov 2014)
11/25/2014 - PDF - English - SAE
Learn More€54.00 -
SAE ARP 1313D:2014-11-25
Determination of Trace Elements in High Temperature Alloys (Stabilized: Nov 2014)
11/25/2014 - PDF - English - SAE
Learn More€54.00 -
14/30317094 DC:2014
BS EN 3197. Aerospace series. Design and installation of aircraft electrical and optical interconnection systems
11/21/2014 - PDF - English - BSI
Learn More€43.00 -
SAE AMS 4130N:2014-11-18
Aluminum Alloy Die Forgings 4.4Cu - 0.85Si - 0.80Mn (2025-T6) Solution and Precipitation Heat Treated (Stabilized: Nov 2014)
11/18/2014 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 4125L:2014-11-14
Aluminum Alloy Die Forgings, and Rolled or Forged Rings 0.9Si - 0.62Mg - 0.25Cr (6151-T6) Solution and Precipitation Heat Treated (Stabilized: Nov 2014)
11/14/2014 - PDF - English - SAE
Learn More€75.00 -
€93.00 -
UNE-EN 16602-70-01:2014
Space product assurance - Cleanliness and contamination control (Endorsed by AENOR in November of 2014.)
11/1/2014 - PDF - English - AENOR
Learn More€111.00 -
UNE-EN 16602-70-02:2014
Space product assurance - Thermal vacuum outgassing test for the screening of space materials (Endorsed by AENOR in November of 2014.)
11/1/2014 - PDF - English - AENOR
Learn More€80.00 -
NF EN 4629, L10-546 (11/2014)
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Softened - Forging stock - De
11/1/2014 - Paper - English, French - AFNOR
Learn More€43.50 -
UNE-EN 2512:2014
Aerospace series - Aluminium alloy AL-P7175 - T7351 - Plate - 6mm < a <= 100 mm (Endorsed by AENOR in November of 2014.)
11/1/2014 - PDF - English - AENOR
Learn More€38.00 -
BS EN 4630:2014
Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De = 200 mm. 900 MPa = Rm = 1 050 MPa
10/31/2014 - PDF - English - BSI
Learn More€151.00 -
BS EN 4720:2014
Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted and electroslag remelted (ESR). Hardened and tempered. Bar. De = 200 mm. 1 150 MPa = Rm = 1 300 MPa
10/31/2014 - PDF - English - BSI
Learn More€151.00 -
BS EN 4721:2014
Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted and electroslag remelted (ESR). Hardened and tempered. Bar. De = 200 mm. 900 MPa = Rm = 1 050 MPa
10/31/2014 - PDF - English - BSI
Learn More€151.00 -
BS EN 2278:2014
Aerospace series. Steel X12CrNiMoV12-3 (1.4933). 900 MPa = Rm = 1 100 MPa. Bars. De = 150 mm
10/31/2014 - PDF - English - BSI
Learn More€151.00 -
BS EN 2512:2014
Aerospace series. Aluminium alloy AL-P7175. T7351. Plate. 6mm < a = 100 mm
10/31/2014 - PDF - English - BSI
Learn More€151.00 -
SAE AMS-QQ-A-200/11A:2014-10-13
Aluminum Alloy 7075, Bar, Rod, Shapes, Tube, and Wire, Extruded (Stabilized: Oct 2014)
10/13/2014 - PDF - English - SAE
Learn More€79.00 -
UNE-EN 2032-001:2014
Aerospace series - Metallic materials - Part 001: Conventional designation (Endorsed by AENOR in October of 2014.)
10/1/2014 - PDF - English - AENOR
Learn More€72.00 -
DIN EN 2032-001:2014-10
Aerospace series - Metallic materials - Part 001: Conventional designation, German and English version EN 2032-001:2014
10/1/2014 - PDF - English, German - DIN
Learn More€99.35 -
SAE AMS 4260G:2014-10-01
Aluminum Alloy, Investment Castings 7.0Si - 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated
10/1/2014 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 4257:2019-11-12
Aluminum Alloy, Extrusion 3.7Cu - 1.15Li - 0.5Zn - 0.45Ag - 0.4Mg - 0.3Mn - 0.1Zr (2055-T84) Solution Heat Treated, Stress Relieved by Stretching 2% to 5% and Aged
9/25/2014 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 7257E:2014-09-05
Perfluorocarbon (FFKM) Engine Oil, Fuel and Hydraulic Fluid Resistant 70 to 80 Hardness For High Temperature Seals in Engine Oil Systems, Fuel Systems and Hydraulic Systems
9/5/2014 - PDF - English - SAE
Learn More€79.00 -
€66.00 -
UNE-EN 2226:2014
Aerospace series - Steel X105CrMo17 (1.4125) - Hardened and tempered - Hand and die forgings - De = 150 mm (Endorsed by AENOR in September of 2014.)
9/1/2014 - PDF - English - AENOR
Learn More€38.00 -
BS EN 2032-001:2014
Aerospace series. Metallic materials Conventional designation
8/31/2014 - PDF - English - BSI
Learn More€293.00 -
NBN EN 2032-001:2014
Aerospace series - Metallic materials - Part 001: Conventional designation
8/22/2014 - PDF - French - NBN
Learn More€142.00 -
NBN EN 2032-001:2014
Aerospace series - Metallic materials - Part 001: Conventional designation
8/22/2014 - PDF - German - NBN
Learn More€142.00 -
NBN EN 2032-001:2014
Aerospace series - Metallic materials - Part 001: Conventional designation
8/22/2014 - PDF - English - NBN
Learn More€142.00 -
NBN EN 2226:2014
Aerospace series - Steel X105CrMo17 (1.4125) - Hardened and tempered - Hand and die forgings - De ? 150 mm
8/22/2014 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2226:2014
Aerospace series - Steel X105CrMo17 (1.4125) - Hardened and tempered - Hand and die forgings - De ? 150 mm
8/22/2014 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2226:2014
Aerospace series - Steel X105CrMo17 (1.4125) - Hardened and tempered - Hand and die forgings - De = 150 mm
8/22/2014 - PDF - English - NBN
Learn More€58.00 -
SAE AMS 3710C:2022-12-29
Sandwich Structures, Glass Fabric-Resin Low Pressure Molded, Heat Resistant
8/19/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3912A:2022-08-10
Radomes, Foam Sandwich Polyimide/Quartz Cloth Construction
8/19/2014 - PDF - English - SAE
Learn More€96.00 -
€96.00 -
€60.00
-
€60.00
-
€89.00 -
€89.00 -
SAE AMS 3909/1A:2022-10-04
Cloth, Aramid 3.0 oz per sq yd (102 g/m2), 350 Pounds Force per Inch (61294 N/m)
8/19/2014 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3909/2A:2022-10-04
Cloth, Aramid, 2.25 oz per sq yd (76.3 g/m2), 250 Pounds Force per Inch (43782 N/m)
8/19/2014 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3909/3A:2022-10-04
Cloth, Aramid 2.0 oz per sq yd (68 g/m2), 230 Pounds Force per Inch (40279 N/m) (Warp) and 220 Pounds Force per Inch (38528 N/m) (Filling)
8/19/2014 - PDF - English - SAE
Learn More€47.00 -
€75.00 -
SAE AMS 3920A:2022-08-10
Acceptance Criteria Adhesive-Bonded Metal-Faced Sandwich Structures
8/19/2014 - PDF - English - SAE
Learn More€89.00 -
€75.00 -
SAE AMS 3898/3B:2022-04-13
Interleaf Carrier Material, Composite Tape Polyethylene Coated Paper, Unperforated 0.0035 inch (0.089 mm)
8/18/2014 - PDF - English - SAE
Learn More€39.00 -
SAE AMS 3898/2B:2022-04-13
Interleaf Carrier Material, Composite Tape Polyethylene Film, 0.0018 inch (0.046 mm), Unperforated
8/18/2014 - PDF - English - SAE
Learn More€39.00 -
SAE AMS 3898/4B:2022-04-13
Interleaf Carrier Material, Composite Tape Paper, 0.04 inch (0.10 mm), Perforated
8/18/2014 - PDF - English - SAE
Learn More€39.00 -
SAE AMS 3898/5B:2022-04-13
Interleaf Carrier Material, Composite Tape Polyethylene Coated Paper, Perforated 0.0035 inch (0.089 mm)
8/18/2014 - PDF - English - SAE
Learn More€39.00 -
SAE AMS 3898/6A:2022-04-13
Interleaf Carrier Material, Composite Tape Differentially Coated Paper, Unperforated 0.0035 inch (0.081 mm)
8/18/2014 - PDF - English - SAE
Learn More€39.00 -
SAE AMS 3898/7A:2022-04-13
Interleaf Carrier Material, Composite Tape Differentially Coated Paper, Unperforated 0.0042 inch (0.107 mm)
8/18/2014 - PDF - English - SAE
Learn More€39.00 -
SAE AMS 3898/8A:2022-04-13
Interleaf Carrier Material, Composite Tape/Broadgoods Kraft, Differentially Coated Paper, Unperforated 0.0038 inch ± 0.0004 (0.097 mm ± 0.010)
8/18/2014 - PDF - English - SAE
Learn More€39.00 -
SAE AMS 3898/9A:2022-04-13
Interleaf Carrier Material, Composite Tape/Broadgoods Kraft, Differentially Coated Paper, Unperforated 0.0050 inch ± 0.0005 (0.127 mm ± 0.013)
8/18/2014 - PDF - English - SAE
Learn More€39.00 -
SAE AMS 3898/1B:2022-04-13
Interleaf Carrier Material, Composite Tape Parchment, 0.004 inch (0.10 mm), Unperforated
8/18/2014 - PDF - English - SAE
Learn More€81.00 -
SAE AMS 3898B:2022-04-13
Interleaf Carrier Material, Composite Tape or Broadgoods Paper, 0.004 inch (0.10 mm), Perforated
8/18/2014 - PDF - English - SAE
Learn More€75.00 -
€66.00 -
€66.00 -
SAE AMS 3729A:2022-10-04
Epoxy Resin Matrix, Thermosetting Moderate Temperature Resistant, Unfilled
8/17/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3107/1A:2022-08-10
Primer, Adhesive, Corrosion-Inhibiting High Durability Epoxy, -55 to +95 °C (-67 to +203 °F)
8/15/2014 - PDF - English - SAE
Learn More€54.00 -
SAE AMS 3107/2A:2022-08-10
Primer, Adhesive, Corrosion-Inhibiting High Durability Epoxy, -55 to +120 °C (-67 to +248 °F)
8/15/2014 - PDF - English - SAE
Learn More€54.00 -
SAE AMS 3107/3A:2022-08-10
Primer, Adhesive, Corrosion-Inhibiting High Durability Epoxy, -55 to +175 °C (-67 to +347 °F)
8/15/2014 - PDF - English - SAE
Learn More€54.00 -
SAE AMS 3107/4A:2022-08-10
Primer, Adhesive, Corrosion-Inhibiting High Durability Epoxy, -55 to +215 °C (-67 to +419 °F)
8/15/2014 - PDF - English - SAE
Learn More€54.00 -
SAE AMS 3107A:2022-08-10
Primer, Adhesive, Corrosion-Inhibiting for High Durability Structural Adhesive Bonding
8/15/2014 - PDF - English - SAE
Learn More€96.00 -
SAE AMS 3109:2022-08-10
Primer, Adhesive, Electrodeposited -55 to +82 °C (-67 to +180 °F)
8/15/2014 - PDF - English - SAE
Learn More€93.00 -
SAE AMS 3695/3:2022-01-20
Adhesive Film, Epoxy-Base, High Durability For 175 °C (350 °F) Service
8/15/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3695/4:2022-01-20
Adhesive Film, Epoxy-Base, High Durability For 215 °C (420 °F) Service
8/15/2014 - PDF - English - SAE
Learn More€79.00 -
€86.00 -
SAE AMS 3689B:2022-08-10
Adhesive, Foaming, Honeycomb, Core Splice, Structural -54 to +177 °C (-65 to +350 °F)
8/14/2014 - PDF - English - SAE
Learn More€86.00 -
SAE AMS 3695/1:2022-01-20
Adhesive Film, Epoxy-Base, High Durability For 95 °C (200 °F) Service
8/14/2014 - PDF - English - SAE
Learn More€79.00 -
SAE ARP 1610A:2022-06-05
Physical-Chemical Characterization Techniques, Epoxy Adhesive and Prepreg Resin Systems
8/14/2014 - PDF - English - SAE
Learn More€124.00 -
€105.00 -
SAE ARP 1674A:2022-06-05
Automated Manufacture of Continuous Multi-Ply Carbon Fiber/Epoxy Resin Impregnated Broadgoods
8/14/2014 - PDF - English - SAE
Learn More€60.00 -
SAE ARP 1927:2022-06-07
Application of Direct Pressure to Resin in Curing of Epoxy and Addition Type Polyimides
8/14/2014 - PDF - English - SAE
Learn More€83.00 -
SAE AMS 3688B:2022-08-10
Adhesive, Foaming, Honeycomb Core Splice, Structural -55 to +82 °C (-65 to +180 °F)
8/14/2014 - PDF - English - SAE
Learn More€86.00 -
SAE AMS 3692C:2022-01-20
Adhesive Compound, Epoxy Resin High Temperature Application
8/14/2014 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3695:2022-01-20
Adhesive Film, Epoxy-Base for High Durability Structural Adhesive Bonding
8/14/2014 - PDF - English - SAE
Learn More€93.00 -
SAE AMS 3695/2:2022-01-20
Adhesive Film, Epoxy-Base, High Durability For 120 °C (250 °F) Service
8/14/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3686A:2022-01-20
Adhesive, Polyimide Resin, Film and Paste High Temperature Resistant, 315 °C (599 °F)
8/12/2014 - PDF - English - SAE
Learn More€86.00 -
NF EN 4507, L17-115 (08/2014)
Aerospace series - Non-metallic materials - Textiles - Test method - Determination of water extractable matter - Série aérospatiale
8/1/2014 - Paper - English, French - AFNOR
Learn More€43.50 -
BS EN 2226:2014
Aerospace series. Steel X105CrMo17 (1.4125). Hardened and tempered. Hand and die forgings. De = 150 mm
7/31/2014 - PDF - English - BSI
Learn More€151.00 -
€75.00 -
€60.00 -
SAE AMS 3901/11C:2014-07-31
Yarn, Organic Fiber (Para-Aramid), High Modulus 1420 (1580 d tex) Denier, 1.2% Finish
7/31/2014 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3901/12C:2014-07-31
Yarn, Organic Fiber (Para-Aramid), High Modulus 2160 (2400 d tex) Denier, 1.2% Finish
7/31/2014 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3901/13B:2014-07-31
Yarn, Organic Fiber (Para-Aramid), High Modulus 2450 (2720 d tex) Denier, 0.6% Finish
7/31/2014 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3901/15B:2014-07-31
Roving, Organic Fiber (Para-Aramid), High Modulus 7350 Denier, (8200 d tex), 0.6% Finish
7/31/2014 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3901/16B:2014-07-31
Roving, Organic Fiber (Para-Aramid), High Modulus 8520 Denier, (9500 d tex), 0.6% Finish
7/31/2014 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3901/17B:2014-07-31
Yarn, Organic Fiber (Para-Aramid), High Modulus 720 Denier, (800 d tex), 1.2% Finish
7/31/2014 - PDF - English - SAE
Learn More€47.00 -
€79.00 -
SAE AMS 3901/10C:2014-07-30
Yarn, Organic Fiber (Para-Aramid), High Modulus 1140 (1270 d tex) Denier, 1.2% Finish
7/30/2014 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3901/2D:2014-07-30
Yarn, Organic Fiber (Para-Aramid), High Modulus 380 Denier, (420 d tex), 0.6% Finish
7/30/2014 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3901/3D:2014-07-30
Yarn, Organic Fiber (Para-Aramid), High Modulus 1140 Denier (1270 d tex), 0.6% Finish
7/30/2014 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3901/4D:2014-07-30
Yarn, Organic Fiber (Para-Aramid), High Modulus 1420 Denier (1580 d tex), 0.6% Finish
7/30/2014 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3901/5D:2014-07-30
Roving, Organic Fiber (Para-Aramid), High Modulus 7100 Denier, (7900 d tex), 0.6% Finish
7/30/2014 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3901/6D:2014-07-30
Roving, Organic Fiber (Para-Aramid), High Modulus 4560 Denier, (5070 d tex), 0.6% Finish
7/30/2014 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3901/7D:2014-07-30
Yarn, Organic Fiber (Para-Aramid), High Modulus 2160 Denier (2400 d tex), 0.6% Finish
7/30/2014 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3901/1D:2014-07-29
Yarn, Organic Fiber (Para-Aramid), High Modulus 195 (215 d tex) Denier, 0.6% Finish
7/29/2014 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 4012G:2014-07-28
Aluminum Sheet, Laminated Edge Bonded (Stabilized: Jul 2014)
7/28/2014 - PDF - English - SAE
Learn More€66.00 -
SAE AMS-QQ-A-225/9A:2014-07-25
Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes, Rolled, Drawn, or Cold Finished (Stabilized: Jul 2014)
7/25/2014 - PDF - English - SAE
Learn More€70.00 -
€116.00 -
€119.00 -
€60.00 -
SAE AIR 6291:2014-07-07
Guidelines for Repair Process Evaluation of Aluminum Bonded Structure
7/7/2014 - PDF - English - SAE
Learn More€149.00 -
DIN EN 2402:2014-07
Aerospace Series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D10 mm, German and English version EN 2402:2014
7/1/2014 - PDF - English, German - DIN
Learn More€52.90 -
DIN EN 4293:2014-07
Aerospace series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D150 mm, German and English version EN 4293:2014
7/1/2014 - PDF - English, German - DIN
Learn More€52.90 -
NBN EN 2402:2014
Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D ? 10 mm
6/20/2014 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2402:2014
Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D ? 10 mm
6/20/2014 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2402:2014
Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D = 10 mm
6/20/2014 - PDF - English - NBN
Learn More€58.00 -
NBN EN 4293:2014
Aerospace series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D ? 150 mm
6/20/2014 - PDF - French - NBN
Learn More€58.00 -
NBN EN 4293:2014
Aerospace series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D ? 150 mm
6/20/2014 - PDF - German - NBN
Learn More€58.00 -
NBN EN 4293:2014
Aerospace series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D = 150 mm
6/20/2014 - PDF - English - NBN
Learn More€58.00 -
UNE-EN 2402:2014
Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D <= 10 mm (Endorsed by AENOR in June of 2014.)
6/1/2014 - PDF - English - AENOR
Learn More€38.00 -
UNE-EN 4293:2014
Aerospce series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D <= 150 mm (Endorsed by AENOR in June of 2014.)
6/1/2014 - PDF - English - AENOR
Learn More€38.00 -
BS EN 2402:2014
Aerospace series. Heat resisting nickel base alloy NiCr20Co3Fe3. Annealed. Wire. D = 10 mm
5/31/2014 - PDF - English - BSI
Learn More€151.00 -
BS EN 4293:2014
Aerospace series. Aluminium alloy AL-P7175. T73511. Extruded bar and section. a or D = 150 mm
5/31/2014 - PDF - English - BSI
Learn More€151.00 -
SAE AMS 5669B:2014-05-30
Alloy Bars, Corrosion and Heat Resistant Nickel Base - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted (Stabilized: May 2014)
5/30/2014 - PDF - English - SAE
Learn More€54.00 -
SAE AMS 3338G:2014-05-27
Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 75 - 85 (Stabilized: May 2014)
5/27/2014 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3348D:2014-05-27
Silicone (VMQ) Rubber 1150 psi (7.93 MPa) Tensile Strength, High Resiliency 25 - 35 (Stabilized: May 2014)
5/27/2014 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3349D:2014-05-27
Silicone (VMQ) Rubber 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 - 75 (Stabilized: May 2014)
5/27/2014 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3356F:2014-05-27
Silicone (VMQ) Rubber Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65 (Stabilized: May 2014)
5/27/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 4280J:2014-05-19
Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.5Mg (355.0-T71) Solution Heat Treated and Overaged
5/19/2014 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 4281G:2014-05-19
Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated
5/19/2014 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3198L:2014-05-08
Sponge, Chloroprene (CR) Rubber Medium Stiffness (Stabilized: May 2014)
5/8/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3199L:2014-05-08
Sponge, Chloroprene (CR) Rubber Firm (Stabilized: May 2014)
5/8/2014 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3250K:2014-05-08
Synthetic Rubber and Cork Composition General Purpose Soft (Stabilized: May 2014)
5/8/2014 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 3251J:2014-05-08
Synthetic Rubber and Cork Composition General Purpose Medium (Stabilized: May 2014)
5/8/2014 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 5940D:2019-07-31
Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 34Co - 3.0Cr - 28Ni - 3.0Cb(Nb) - 5.5Al - 0.008B - 25.5Fe Multiple Melted, High Temperature, Oxidation-Resistant, Low Expansion Solution Heat Treated, Precipitation-Hardenable
5/5/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 5390G:2019-07-30
Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 47.5Ni - 22Cr - 1.5Co - 9Mo - 0.60W - 18.5Fe (N-12MV) As-Cast
4/30/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 5388K:2019-07-30
Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 53.3Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V (CW-12MW) As-Cast
4/29/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 5391H:2019-07-30
Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 73Ni - 0.14C - 13Cr - 4.5Mo - 2.3Cb (Nb) - 0.75Ti - 6.0Al - 0.010B - 0.10Zr Vacuum Cast, As-Cast
4/29/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 5396F:2019-07-30
Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 65Ni - 28Mo - 5.5Fe - 0.40V (N-12MV) As-Cast
4/29/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 5755G:2019-07-31
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 64Ni - 5.0Cr - 24.5Mo - 5.5Fe Solution Heat Treated
4/29/2014 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 4985E:2018-11-21
Titanium Alloy, Investment Castings 6Al - 4V 130 UTS, 120 YS, 6% EL Hot Isostatically Pressed Anneal Optional or When Specified
4/24/2014 - PDF - English - SAE
Learn More€86.00 -
14/30301120 DC:2014
BS EN 4677-001. Aerospace series. Welded and brazed assemblies for aerospace constructions. Joints of metallic materials by electron beam welding. Part 001. Quality of welded assemblies
4/14/2014 - PDF - English - BSI
Learn More€24.00 -
14/30301115 DC:2014
BS EN 3207. Aerospace series. Rubber compounds. Technical specification
4/14/2014 - PDF - English - BSI
Learn More€24.00 -
SAE AMS 2980/5A:2021-09-24
Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Carbon Fiber Fabrics, Plain Weave, 193 g/m2, and Epoxy Resin
4/11/2014 - PDF - English - SAE
Learn More€86.00 -
SAE AMS 2980/2B:2021-09-24
Carbon Fiber Fabric and Epoxy Resin Wet Lay-up Repair Material Part 2 - Qualification Program
4/9/2014 - PDF - English - SAE
Learn More€101.00 -
SAE AMS 2980/1B:2021-09-23
Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 1 - General Requirements
4/8/2014 - PDF - English - SAE
Learn More€135.00 -
SAE AMS 2980/3B:2021-09-24
Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 3 – Purchasing Specification - Fabric
4/8/2014 - PDF - English - SAE
Learn More€75.00 -
14/30300825 DC:2014
BS EN 4706. Aerospace series. LED colour and brightness ranking
4/4/2014 - PDF - English - BSI
Learn More€24.00 -
14/30300809 DC:2014
BS EN 2943. Aerospace series. Inserts, screw thread, helical coil, self-locking. Technical specification
4/3/2014 - PDF - English - BSI
Learn More€24.00 -
14/30300810 DC:2014
BS EN 2944. Aerospace series. Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
4/3/2014 - PDF - English - BSI
Learn More€24.00 -
14/30300811 DC:2014
BS EN 3542. Aerospace series. Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy Ni-PH2801 (Inconel X750)
4/3/2014 - PDF - English - BSI
Learn More€24.00 -
SAE AMS 2980/4B:2021-09-24
Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 4 - Purchasing Specification - Resin
4/3/2014 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 4610N:2014-04-03
Brass, Free-Cutting Bars and Rods 61.5Cu - 35Zn - 3.1Pb Half Hard (H02)
4/3/2014 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 5758J:2019-07-31
Alloy, Corrosion-Resistant, Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated for Work Strengthening
4/3/2014 - PDF - English - SAE
Learn More€66.00 -
SAE ARP 5921:2014-04-03
Evaluation of Coking Propensity of Aviation Lubricants in an Air-Oil Mist Environment using the Vapor Phase Coker
4/3/2014 - PDF - English - SAE
Learn More€86.00 -
SAE AMS 7255D:2014-03-31
Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 70 to 80 (Stabilized: Mar 2014)
3/31/2014 - PDF - English - SAE
Learn More€83.00 -
€70.00 -
€70.00 -
SAE AMS 7256B:2014-03-23
Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 85 to 95 (Stabilized: Mar 2014)
3/23/2014 - PDF - English - SAE
Learn More€83.00 -
SAE AMS-R-83283A:2014-03-19
Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type (Stabilized: Mar 2014)
3/19/2014 - PDF - English - SAE
Learn More€83.00 -
SAE MAM 2279B:2014-03-19
Tolerances, Metric Rubber Products (Stabilized: Mar 2014)
3/19/2014 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 3207N:2014-03-18
Chloroprene (CR) Rubber Weather Resistant 25 - 35 (Stabilized: Mar 2014)
3/18/2014 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 3208N:2014-03-18
Chloroprene (CR) Rubber Weather Resistant 45 - 55 (Stabilized: Mar 2014)
3/18/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 3209M:2014-03-18
Chloroprene (CR) Rubber Weather Resistant 65 - 75 (Stabilized: Mar 2014)
3/18/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 2980B:2021-09-23
Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 0 - Introduction
3/17/2014 - PDF - English - SAE
Learn More€54.00 -
SAE AMS-STD-185A:2014-03-17
Identification Marking of Copper and Copper Base Alloy Mill Products (Stabilized: Mar 2014)
3/17/2014 - PDF - English - SAE
Learn More€79.00 -
SAE AMS-QQ-A-250/18B:2014-03-06
Aluminum 7075, Plate and Sheet Alclad One Side (Stabilized: Mar 2014)
3/6/2014 - PDF - English - SAE
Learn More€75.00 -
SAE AMS-QQ-A-250/3A:2014-03-06
Aluminum Alloy Alclad 2014, Plate and Sheet (Stabilized: Mar 2014)
3/6/2014 - PDF - English - SAE
Learn More€75.00 -
SAE AMS-QQ-A-200/2B:2014-03-04
Aluminum Alloy 2014, Bar, Rod, Shapes, Tube, and Wire, Extruded (Stabilized: Mar 2014)
3/4/2014 - PDF - English - SAE
Learn More€75.00
