49.025 : Materials for aerospace construction
-
NBN EN 2667-2:2018
Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 2: Compressive tube shear
2/28/2018 - PDF - English - NBN
Learn More€58.00 -
SAE AMS 2253F:2018-02-24
Tolerances Carbon and Alloy Steel Tubing (Stabilized: Feb 2018)
2/24/2018 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 6474B:2018-02-24
Forgings, Hardenable Steels and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness (Stabilized: Feb 2018)
2/24/2018 - PDF - English - SAE
Learn More€113.00 -
SAE AMS 5625E:2018-02-22
Steel Bars, High Expansion 9.5Ni - 5.5Mn (0.55 - 0.65C) Cold Finished (Stabilized: Feb 2018)
2/22/2018 - PDF - English - SAE
Learn More€70.00 -
BS EN 2221:2017
Aerospace series. Steel FE-PL31. Hardened and tempered. Hollow bars. 3,5 mm = a = 55 mm
2/15/2018 - PDF - English - BSI
Learn More€151.00 -
SAE AMS 4040P:2018-02-15
Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024-O with 1 ½% Alclad), Annealed
2/15/2018 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 4120S:2018-02-15
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated, Cold Worked, and Naturally Aged (T351)
2/15/2018 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 4339B:2018-02-15
Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu - 1.5Mg - 0.60Mn (2024-T851) Solution Heat Treated, Cold Worked, and Artificially Aged
2/15/2018 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 4402A:2018-02-15
Aluminum Alloy, Extruded Profiles (2024-T432) 4.4Cu - 1.5Mg - 0.6Mn Annealed, Stretch Formed, Solution Heat Treated and Stress Relieved by Stretching
2/15/2018 - PDF - English - SAE
Learn More€60.00 -
SAE AMS-WW-T-700/5B:2018-02-15
Tube, Aluminum Alloy, Drawn, Seamless, 5086 (Stabilized: Feb 2018)
2/15/2018 - PDF - English - SAE
Learn More€70.00 -
SAE AMS-WW-T-700B:2018-02-15
Tube, Aluminum and Aluminum Alloy, Drawn, Seamless, General Specification for (Stabilized: Feb 2018)
2/15/2018 - PDF - English - SAE
Learn More€86.00 -
SAE J 470:2018-02-15
Wrought Nickel and Nickel-Related Alloys (Stabilized: Feb 2018)
2/15/2018 - PDF - English - SAE
Learn More€105.00 -
BS EN 6041:2018
Aerospace series. Non-metallic materials. Test method. Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
2/12/2018 - PDF - English - BSI
Learn More€180.00 -
SAE AMS 4276B:2018-02-12
Aluminum Alloy, Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-O) Annealed, Fine Grained
2/12/2018 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 4408A:2018-02-12
Aluminum Alloy, Plate (7140-T7651) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged
2/12/2018 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 5714E:2022-11-18
Alloy Bars, Forgings, and Rings, Corrosion- and Heat-Resistant 73Ni - 15.5Cr - 2.5Ti - 0.70Al - 7.0Fe Precipitation Hardenable
2/12/2018 - PDF - English - SAE
Learn More€70.00 -
BS EN 2667-2:2018
Aerospace series. Non-metallic materials. Foaming structural adhesives. Test methods Compressive tube shear
2/8/2018 - PDF - English - BSI
Learn More€180.00 -
SAE AMS 7721D:2018-02-07
Lead Alloy Sheet and Extrusions 93Pb - 6.5Sb - 0.50Sn As Fabricated (Stabilized: Feb 2018)
2/7/2018 - PDF - English - SAE
Learn More€66.00 -
BS EN 6018:2017
Aerospace series. Test methods for metallic materials. Determination of density according to displacement method
2/6/2018 - PDF - English - BSI
Learn More€151.00 -
SAE AMS 4277B:2018-02-06
Aluminum Alloy, Sheet 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-O) Annealed, Fine Grained
2/6/2018 - PDF - English - SAE
Learn More€66.00 -
UNE-EN 6064:2017
Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC) (Endorsed by Asociación Española de Normalización in February of 2018.)
2/1/2018 - PDF - English - AENOR
Learn More€57.00 -
DIN EN 2119:2018-02
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets -2 mmD 10 mm - R<(Index)m> 960 MPa, German and English version EN 2119:2017
2/1/2018 - PDF - English, German - DIN
Learn More€52.90 -
DIN EN 2135:2018-02
Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar - D<(Index)e>40 mm, German and English version EN 2135:2017
2/1/2018 - PDF - English, German - DIN
Learn More€52.90 -
DIN EN 2222:2018-02
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings, German and English version EN 2222:2017
2/1/2018 - PDF - English, German - DIN
Learn More€52.90 -
DIN EN 2221:2018-02
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mma 55 mm, German and English version EN 2221:2017
2/1/2018 - PDF - English, German - DIN
Learn More€52.90 -
DIN EN 2174:2018-02
Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Forgings - D<(Index)e>100 mm - R<(Index)m> 850 MPa, German and English version EN 2174:2017
2/1/2018 - PDF - English, German - DIN
Learn More€52.90 -
DIN EN 2137:2018-02
Aerospace series - Steel FE-PL75 - 1100 MPaR<(Index)m> 1250 MPa - Bars - D<(Index)e> 100 mm, German and English version EN 2137:2017
2/1/2018 - PDF - English, German - DIN
Learn More€52.90 -
NF EN 4801, L43-151 (02/2018)
Aerospace series - Flange couplings - Swivel flange with 3 fastening holes, in heat resisting steel - Inch series
2/1/2018 - Paper - English, French - AFNOR
Learn More€42.11 -
NF EN 4803, L43-153 (02/2018)
Aerospace series - Flange couplings - Swivel flange with 4 fastening holes, in heat resisting steel - Inch series
2/1/2018 - Paper - English, French - AFNOR
Learn More€42.11 -
NF EN 4802, L43-152 (02/2018)
Aerospace series - Flange couplings - Swivel flange with 3 fastening holes, in nickel alloy - Inch series
2/1/2018 - Paper - English, French - AFNOR
Learn More€42.11 -
NF L17-131 (02/2018)
Aerospace series - Polychloroprène rubbers - Class 31 - Characteristics
2/1/2018 - Paper - French - AFNOR
Learn More€48.00 -
ASD-STAN prEN 4867:2018
Aerospace series - Laser surface marking by discoloration
1/30/2018 - PDF - English - ASD-STAN
Learn More€94.50 -
NBN EN 6064:2018
Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
1/30/2018 - PDF - French - NBN
Learn More€58.00 -
NBN EN 6064:2018
Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
1/30/2018 - PDF - German - NBN
Learn More€58.00 -
NBN EN 6064:2018
Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
1/30/2018 - PDF - English - NBN
Learn More€58.00 -
NBN EN 2119:2018
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm ? D ? 10 mm - Rm ? 960 MPa
1/30/2018 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2119:2018
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm ? D ? 10 mm - Rm ? 960 MPa
1/30/2018 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2119:2018
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm = D = 10 mm - Rm = 960 MPa
1/30/2018 - PDF - English - NBN
Learn More€58.00 -
NBN EN 2222:2018
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings
1/30/2018 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2222:2018
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings
1/30/2018 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2221:2018
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mm ? a ? 55 mm
1/30/2018 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2221:2018
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mm ? a ? 55 mm
1/30/2018 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2137:2018
Aerospace series - Steel FE-PL75 - 1 100 MPa ? Rm ? 1 250 MPa - Bars - De ? 100 mm
1/30/2018 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2137:2018
Aerospace series - Steel FE-PL75 - 1 100 MPa ? Rm ? 1 250 MPa - Bars - De ? 100 mm
1/30/2018 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2135:2018
Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar - De ? 40 mm
1/30/2018 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2135:2018
Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar - De ? 40 mm
1/30/2018 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2174:2018
Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Forgings - De ? 100 mm - Rm ? 850 MPa
1/30/2018 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2174:2018
Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Forgings - De ? 100 mm - Rm ? 850 MPa
1/30/2018 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2222:2018
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings
1/30/2018 - PDF - English - NBN
Learn More€58.00 -
NBN EN 2221:2018
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mm = a = 55 mm
1/30/2018 - PDF - English - NBN
Learn More€58.00 -
NBN EN 2137:2018
Aerospace series - Steel FE-PL75 - 1 100 MPa = Rm = 1 250 MPa - Bars - De = 100 mm
1/30/2018 - PDF - English - NBN
Learn More€58.00 -
NBN EN 2135:2018
Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar - De = 40 mm
1/30/2018 - PDF - English - NBN
Learn More€58.00 -
NBN EN 2174:2018
Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Forgings - De = 100 mm - Rm = 850 MPa
1/30/2018 - PDF - English - NBN
Learn More€58.00 -
18/30372569 DC:2018
BS EN 6140. Aerospace series. Plug, protective, non metallic for flared and flareless fine thread fitting ends
1/26/2018 - PDF - English - BSI
Learn More€24.00 -
SAE J 454:2018-01-09
General Data on Wrought Aluminum Alloys (Stabilized: Jan 2018)
1/9/2018 - PDF - English - SAE
Learn More€120.00 -
SAE J 993:2018-01-09
Alloy and Temper Designation Systems for Aluminum (Stabilized: Jan 2018)
1/9/2018 - PDF - English - SAE
Learn More€89.00 -
€79.00
-
BS EN 2119:2017
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated. Wires for rivets. 2 mm = D = 10 mm. Rm = 960 MPa
1/5/2018 - PDF - English - BSI
Learn More€151.00 -
BS EN 2135:2017
Aerospace series. Steel FE-PL61. Carburized, hardened and tempered. Bar. De = 40 mm
1/5/2018 - PDF - English - BSI
Learn More€151.00 -
BS EN 6064:2017
Aerospace series. Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
1/4/2018 - PDF - English - BSI
Learn More€151.00 -
SAE AMS 2487B:2022-01-21
Anodic Treatment of Titanium and Titanium Alloys Solution pH 12.4 Maximum
1/2/2018 - PDF - English - SAE
Learn More€70.00 -
DIN EN 6018:2018-01
Aerospace series - Test methods for metallic materials - Determination of density according to displacement method, German and English version EN 6018:2017
1/1/2018 - PDF - English, German - DIN
Learn More€39.35 -
UNE-EN 2119:2017
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm <= D <= 10 mm - Rm >= 960 MPa (Endorsed by Asociación Española de Normalización in January of 2018.)
1/1/2018 - PDF - English - AENOR
Learn More€38.00 -
DIN EN 2037:2018-01
Aerospace series - Hexagonal steel bars drawn - Dimensions - Tolerances h 11 and h 12, German and English version EN 2037:2017
1/1/2018 - PDF - English, German - DIN
Learn More€52.90 -
NF EN 4805, L43-155 (01/2018)
Aerospace series - Flange couplings - Weld coupling, straight, in heat resisting steel - Inch series
1/1/2018 - Paper - English, French - AFNOR
Learn More€42.11 -
NF EN 4807, L43-157 (01/2018)
Aerospace series - Flange couplings - Weld coupling, 90° elbow, in heat resisting steel - Inch series
1/1/2018 - Paper - English, French - AFNOR
Learn More€42.11 -
NF EN 4810, L43-160 (01/2018)
Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal on heat resisting steel plate with 3 fastening holes - Inch series
1/1/2018 - Paper - English, French - AFNOR
Learn More€42.11 -
NF EN 4813, L43-163 (01/2018)
Aerospace series - Flange couplings - Cap, in heat resisting steel - Inch series
1/1/2018 - Paper - English, French - AFNOR
Learn More€42.11 -
UNE-EN 2135:2017
Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar - De = 40 mm
1/1/2018 - PDF - English - AENOR
Learn More€38.00 -
UNE-EN 2137:2017
Aerospace series - Steel FE-PL75 - 1 100 MPa <= Rm <= 1 250 MPa - Bars - De <= 100 mm (Endorsed by Asociación Española de Normalización in January of 2018.)
1/1/2018 - PDF - English - AENOR
Learn More€38.00 -
UNE-EN 2174:2017
Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Forgings - De = 100 mm - Rm = 850 MPa
1/1/2018 - PDF - English - AENOR
Learn More€38.00 -
UNE-EN 2221:2017
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mm <= a <= 55 mm (Endorsed by Asociación Española de Normalización in January of 2018.)
1/1/2018 - PDF - English - AENOR
Learn More€38.00 -
UNE-EN 2222:2017
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings (Endorsed by Asociación Española de Normalización in January of 2018.)
1/1/2018 - PDF - English - AENOR
Learn More€38.00 -
DIN EN 2306:2018-01
Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars, German and English version EN 2306:2017
1/1/2018 - PDF - English, German - DIN
Learn More€52.90 -
NF EN 4804, L43-154 (01/2018)
Aerospace series - Flange couplings - Swivel flange with 4 fastening holes, in nickel alloy - Inch series
1/1/2018 - Paper - English, French - AFNOR
Learn More€42.11 -
NF EN 4806, L43-156 (01/2018)
Aerospace series - Flange couplings - Weld coupling, straight, in nickel alloy - Inch series
1/1/2018 - Paper - English, French - AFNOR
Learn More€42.11 -
DIN EN 2850:2018-01
Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction, German and English version EN 2850:2017
1/1/2018 - PDF - English, German - DIN
Learn More€79.72 -
NF EN 6041, L17-041 (01/2018)
Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
1/1/2018 - Paper - English, French - AFNOR
Learn More€66.25 -
NF L17-261 (01/2018)
Aerospace series - Fluorosilicone rubbers - Class 61 - Characteristics
1/1/2018 - Paper - English, French - AFNOR
Learn More€43.50 -
DIN EN 3094:2018-01
Aerospace series - Sealants - Test method - determination of the application time, German and English version EN 3094:2017
1/1/2018 - PDF - English, German - DIN
Learn More€45.98 -
NBN EN 6018:2017
Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
12/21/2017 - PDF - French - NBN
Learn More€37.00 -
NBN EN 6018:2017
Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
12/21/2017 - PDF - German - NBN
Learn More€37.00 -
NBN EN 6018:2017
Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
12/21/2017 - PDF - English - NBN
Learn More€37.00 -
SAE J 457:2017-12-20
Chemical Compositions, Mechanical Property Limits, and Dimensional Tolerances of SAE Wrought Aluminum Alloys (Stabilized: Dec 2017)
12/20/2017 - PDF - English - SAE
Learn More€47.00 -
€47.00
-
17/30371341 DC:2017
BS EN 4687. Aerospace series. Paints and varnishes. Chromate free (non corrosion inhibiting) two component cold curing primer. Chromate free primer for military application
12/18/2017 - PDF - English - BSI
Learn More€24.00 -
18/30371343 DC:2017
BS EN 4688. Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing epoxy primer. High corrosion resistance for military application
12/18/2017 - PDF - English - BSI
Learn More€24.00 -
18/30371344 DC:2017
BS EN 4689. Aerospace series. Paints and varnishes. Two components cold curing polyurethane finish. High flexibility and chemical agent resistance for military application
12/18/2017 - PDF - English - BSI
Learn More€24.00 -
SAE AMS 4601A:2017-12-18
Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold Worked and Naturally Aged (2219 -T31/-T351)
12/18/2017 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 5350K:2022-11-18
Steel, Corrosion and Moderate Heat-Resistant, Investment Castings 12.5Cr (410) Hardened and Tempered
12/7/2017 - PDF - English - SAE
Learn More€86.00 -
SAE AMS 6452E:2017-12-07
Steel, Welding Wire 0.95Cr - 0.20Mo (0.38 - 0.43C) Vacuum Melted, Environment Controlled Packaging (Stabilized: Dec 2017)
12/7/2017 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 4035M:2017-12-07
Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-O) Annealed, or when specified, “As Fabricated” (2024-F)
12/7/2017 - PDF - English - SAE
Learn More€75.00 -
SAE AMS-QQ-A-200/6C:2017-12-07
Aluminum Alloy 5454, Bar, Rod, Shapes, Tube, and Wire, Extruded (Stabilized: Dec 2017)
12/7/2017 - PDF - English - SAE
Learn More€66.00 -
SAE AMS-QQ-A-200/7C:2017-12-07
Aluminum Alloy 5456, Bar, Rod, Shapes, Tube, and Wire, Extruded (Stabilized: Dec 2017)
12/7/2017 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 4928W:2017-12-07
Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed
12/7/2017 - PDF - English - SAE
Learn More€87.00 -
SAE AMS 4434N:2017-12-07
Magnesium Alloy Castings, Sand 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated
12/7/2017 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 6466G:2017-12-05
Steel, Corrosion-Resistant, Welding Wire 5.2Cr – 0.55Mo (Stabilized: Dec 2017)
12/5/2017 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 5918:2022-05-12
Cobalt Alloy, Corrosion and Heat Resistant, Bars 62Co-28Cr-6Mo Warm-Worked
12/5/2017 - PDF - English - SAE
Learn More€60.00 -
UNE-EN 6018:2017
Aerospace series - Test methods for metallic materials - Determination of density according to displacement method (Endorsed by Asociación Española de Normalización in December of 2017.)
12/1/2017 - PDF - English - AENOR
Learn More€16.00 -
NF EN 2119, L11-029 (12/2017)
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm less than or equal to D less than or equal to 10 mm - Rm more than or equal to 960 MPa - Série aérospatiale - Acier résistant à chaud FE-PA2601 (X6NiCrTiMoV26-15) - Mis en solution et précipité - Fils pour rivets - 2 mm inférieur ou égal D inférieur ou égal 10 mm - Rm supérieur ou égal 960 MPa
12/1/2017 - Paper - French - AFNOR
Learn More€46.55 -
NF EN 2135, L11-208 (12/2017)
Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar - De
12/1/2017 - Paper - English, French - AFNOR
Learn More€42.11 -
NF EN 2137, L11-210 (12/2017)
Aerospace series - Steel FE-PL75 - 1 100 MPa less than or equal to Rm less than or equal to 1 250 MPa - Bars - De less than or equal to 100 mm - Série aérospatiale - Acier FE-PL75 - 1 100 MPa = Rm = 1 250 MPa - Barres - De = 100 mm
12/1/2017 - Paper - French - AFNOR
Learn More€48.00 -
NF EN 2174, L11-028 (12/2017)
Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Forgings - De less than or equal to 100 mm - Rm =more than or equal to 850 MPa
12/1/2017 - Paper - French - AFNOR
Learn More€46.55 -
NF EN 2221, L11-213 (12/2017)
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mm less than or equal to a than or equal 55 mm - Série aérospatiale - Acier FE-PL31 - Trempé et revenu - Ébauches tubulaires - 3,5 mm inférieur ou égal a inférieur ou égal 55 mm
12/1/2017 - Paper - French - AFNOR
Learn More€48.00 -
NF EN 2222, L11-209 (12/2017)
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings
12/1/2017 - Paper - French - AFNOR
Learn More€46.50 -
NF EN 4812, L43-162 (12/2017)
Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes - Inch series
12/1/2017 - Paper - English, French - AFNOR
Learn More€42.11 -
UNE-EN 2037:2017
Aerospace series - Hexagonal steel bars drawn - Dimensions - Tolerances h 11 and h 12 (Endorsed by Asociación Española de Normalización in December of 2017.)
12/1/2017 - PDF - English - AENOR
Learn More€35.00 -
UNE-EN 2306:2017
Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars (Endorsed by Asociación Española de Normalización in December of 2017.)
12/1/2017 - PDF - English - AENOR
Learn More€35.00 -
NF EN 4809, L43-159 (12/2017)
Aerospace series - Flange couplings - Gasket seal with fluorocarbon seal on aluminium plate with 3 fastening holes - Inch series
12/1/2017 - Paper - English, French - AFNOR
Learn More€42.11 -
NF EN 4811, L43-161 (12/2017)
Aerospace series - Flange couplings - Gasket seal with fluorocarbon seal on aluminium plate with 4 fastening holes - Inch series
12/1/2017 - Paper - English, French - AFNOR
Learn More€42.11 -
NF EN 4729, L10-318 (12/2017)
Aerospace series - Trivalent chromium based chemical conversion coatings for aluminium and aluminium alloys
12/1/2017 - Paper - English, French - AFNOR
Learn More€64.01 -
NF EN 6064, L17-040 (12/2017)
Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
12/1/2017 - Paper - English, French - AFNOR
Learn More€66.25 -
NF L17-121 (12/2017)
Aerospace series - Butadiene - Acrylonitrile rubbers - Class 21 - Characteristics - Série aérospatiale - Elastomères - Butadiene - Nitrile acrylique - Classe 21 - Caratéristiques
12/1/2017 - Paper - English, French - AFNOR
Learn More€54.50 -
NF L17-163 (12/2017)
Aerospace series - Fluoro silicone rubbers - Class 63 - Characteristics
12/1/2017 - Paper - English, French - AFNOR
Learn More€43.50 -
UNE-EN 2850:2017
Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction (Endorsed by Asociación Española de Normalización in December of 2017.)
12/1/2017 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN 3094:2017
Aerospace series - Sealants - Test method - determination of the application time (Endorsed by Asociación Española de Normalización in December of 2017.)
12/1/2017 - PDF - English - AENOR
Learn More€28.00 -
SAE AMS 6457E:2022-06-03
Steel, Welding Wire 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Vacuum Melted, Environment Controlled Packaging
11/30/2017 - PDF - English - SAE
Learn More€70.00 -
SAE AMS-S-6758B:2017-11-30
Steel, Chrome-Molybdenum (4130) Bars and Reforging Stock (Aircraft Quality) (Stabilized: Nov 2017)
11/30/2017 - PDF - English - SAE
Learn More€96.00 -
17/30370705 DC:2017
BS EN 3685. Aerospace series. Bolts in heat resisting steel FE-PA2601 (A286). Classification: 1 100 MPa/650°C. Technical specification
11/29/2017 - PDF - English - BSI
Learn More€24.00 -
SAE AMS 3731/10C:2017-11-29
POTTING COMPOUND, EPOXY Bisphenol A-Type Unfilled, Room Temperature Cure, Semiflexible (Stabilized: Nov 2017)
11/29/2017 - PDF - English - SAE
Learn More€54.00 -
NBN EN 2037:2017
Aerospace series - Hexagonal steel bars drawn - Dimensions - Tolerances h 11 and h 12
11/22/2017 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2037:2017
Aerospace series - Hexagonal steel bars drawn - Dimensions - Tolerances h 11 and h 12
11/22/2017 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2037:2017
Aerospace series - Hexagonal steel bars drawn - Dimensions - Tolerances h 11 and h 12
11/22/2017 - PDF - English - NBN
Learn More€58.00 -
NBN EN 2306:2017
Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars
11/22/2017 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2306:2017
Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars
11/22/2017 - PDF - English - NBN
Learn More€58.00 -
NBN EN 2850:2017
Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction
11/22/2017 - PDF - French - NBN
Learn More€89.00 -
NBN EN 2850:2017
Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction
11/22/2017 - PDF - German - NBN
Learn More€89.00 -
NBN EN 2850:2017
Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction
11/22/2017 - PDF - English - NBN
Learn More€89.00 -
NBN EN 3094:2017
Aerospace series - Sealants - Test method - Determination of the application time
11/22/2017 - PDF - French - NBN
Learn More€37.00 -
NBN EN 3094:2017
Aerospace series - Sealants - Test method - Determination of the application time
11/22/2017 - PDF - German - NBN
Learn More€37.00 -
NBN EN 3094:2017
Aerospace series - Sealants - Test method - Determination of the application time
11/22/2017 - PDF - English - NBN
Learn More€37.00 -
SAE AMS 6501E:2022-06-03
Steel, Maraging, Welding Wire 18Ni - 8.0Co - 4.9Mo - 0.40Ti - 0.10Al Vacuum Induction Melted, Environment Controlled Packaging
11/21/2017 - PDF - English - SAE
Learn More€70.00 -
SAE AMS-QQ-A-200/4C:2017-11-20
Aluminum Alloy 5083, Bar, Rod, Shapes, Tube, and Wire, Extruded (Stabilized: Nov 2017)
11/20/2017 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 3382D:2017-11-20
Elastomer: Tetrafluoroethylene/Propylene (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 75 to 90 Hardness
11/20/2017 - PDF - English - SAE
Learn More€79.00 -
BS EN 2306:2017
Aerospace series. Heat resisting. Nickel base alloy Ni-Cr20Co3Fe3. Annealed. Bars
11/17/2017 - PDF - English - BSI
Learn More€151.00 -
SAE AMS 3284C:2017-11-16
Sealing Compound, Low Adhesion, for Removable Panels and Fuel Tank Inspection Plates
11/16/2017 - PDF - English - SAE
Learn More€79.00 -
ASTM A646/A646M-17(2022)
Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
11/15/2017 - PDF - English - ASTM
Learn More€51.00 -
SAE AMS 4475B:2017-11-13
Aluminum Alloy, Coiled Sheet, Alclad 4.4Cu – 1.5Mg – 0.60Mn (Alclad 2024, -T4 Coiled Sheet) Solution Heat Treated
11/13/2017 - PDF - English - SAE
Learn More€66.00 -
BS EN 3094:2017
Aerospace series. Sealants. Test method. determination of the application time
11/8/2017 - PDF - English - BSI
Learn More€151.00 -
BS EN 2037:2017
Aerospace series. Hexagonal steel bars drawn. Dimensions. Tolerances h 11 and h 12
11/3/2017 - PDF - English - BSI
Learn More€151.00 -
SAE AMS 7258B:2017-11-03
Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Fuel Resistant, Low Shrinkage 65 - 75
11/3/2017 - PDF - English - SAE
Learn More€89.00 -
SAE AMS 7260E:2017-11-03
Rings, Butadiene-Acrylonitrile (NBR) Rubber, Molded Fuel and Low Temperature Resistant 70 - 80
11/3/2017 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 7266B:2017-11-03
Rings, Sealing, Fluorocarbon Rubber General Purpose, High Temperature, Fuel and Oil Resistant 65 - 75
11/3/2017 - PDF - English - SAE
Learn More€70.00 -
NF EN 6018, L10-035 (11/2017)
Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
11/1/2017 - Paper - French - AFNOR
Learn More€25.05 -
BS EN 2850:2017
Aerospace series. Carbon fibre thermosetting resin - Unidirectional laminates. Compression test parallel to fibre direction
11/1/2017 - PDF - English - BSI
Learn More€180.00 -
17/30369271 DC:2017
BS EN 4860. Aerospace series. Environmental testing. Test Xb. A brasion of markings, letterings, surfaces and materials caused by rubbin g of fingertips and hands
10/31/2017 - PDF - English - BSI
Learn More€24.00 -
SAE AMS 2633D:2017-10-30
Ultrasonic Inspection Centrifugally-Cast, Corrosion-Resistant Steel Tubular Cylinders (Stabilized: Oct 2017)
10/30/2017 - PDF - English - SAE
Learn More€89.00 -
€83.00
-
SAE AMS 4350N:2017-10-25
Magnesium Alloy, Extrusions 6.5A1 - 0.95Zn (AZ61A-F) As Extruded
10/25/2017 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 5031G:2017-10-20
Welding Electrodes, Covered, Steel 0.07 - 0.15C (Stabilized: Oct 2017)
10/20/2017 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 5122K:2017-10-20
Steel Strip (0.90 - 1.04C) (SAE 1095) Hard Temper (Stabilized: Oct 2017)
10/20/2017 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 3217/8A:2017-10-18
Test Slabs, Fluoroelastomer (FKM), 70–80 Hardness, for Improved Gas Turbine Engine Oil Compatibility
10/18/2017 - PDF - English - SAE
Learn More€47.00 -
ASTM D3039/D3039M-17
Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
10/15/2017 - PDF - English - ASTM
Learn More€57.00 -
ASTM D3039/D3039M-17 + Redline
Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
10/15/2017 - PDF - English - ASTM
Learn More€68.00 -
SAE AMS 6456E:2022-06-03
Steel, Welding Wire 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (SAE 4340 Mod) Vacuum Melted, Environment-Controlled Packaging
10/13/2017 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 4463A:2017-10-13
Aluminum Alloy, Plate (7255-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.12Zr Solution Heat Treated, Stress Relieved, and Overaged
10/13/2017 - PDF - English - SAE
Learn More€66.00 -
€54.00
-
€66.00
-
SAE AMS 4464A:2017-10-10
Aluminum Alloy Plate (2624-T351) 4.1Cu - 1.4Mg - 0.6Mn Solution Heat Treated, Cold Worked and Naturally Aged
10/10/2017 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 4467B:2017-10-10
Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu 1.5Mg 0.60Mn (Alclad 2024, -T861 Sheet & Plate) Solution Heat Treated, 6% Cold Worked and Artificially Aged
10/10/2017 - PDF - English - SAE
Learn More€66.00 -
17/30368045 DC:2017
BS EN 4857-1. Aerospace series. Miniature Connectors, High density, electrical, circular, scoop-proof, triple start threaded coupling, operating temperatures 175 °C continuous or 200 continuous. Shell sizes : 05 to 07 Part 001. Technical specification
10/6/2017 - PDF - English - BSI
Learn More€24.00 -
17/30368046 DC:2017
BS EN 4857-002. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous Part 002. Specification of performance and contact arrangements
10/6/2017 - PDF - English - BSI
Learn More€24.00 -
17/30368047 DC:2017
BS EN 4857-003. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous Part 003. Receptacle square flange mounting. Product standard
10/6/2017 - PDF - English - BSI
Learn More€24.00 -
17/30368049 DC:2017
BS EN 4857-004. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous Part 004. Receptacle, hermetic, square flange mounting. Product standard
10/6/2017 - PDF - English - BSI
Learn More€24.00 -
17/30368051 DC:2017
BS EN 4857-005. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous Part 005. Receptacle, hermetic, round flange, brasage mounting. Product standard
10/6/2017 - PDF - English - BSI
Learn More€24.00 -
17/30368055 DC:2017
prEN 4857-006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous. Part 006. Protective cap for receptacle. Product standard
10/6/2017 - PDF - English - BSI
Learn More€24.00 -
17/30368056 DC:2017
prEN 4857-007. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous. Part 007. Protective cap for plug. Product standard
10/6/2017 - PDF - English - BSI
Learn More€24.00 -
17/30368057 DC:2017
prEN 4857-008. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous. Part 008. Non release plug with grounding ring. Product standard 008: ring -
10/6/2017 - PDF - English - BSI
Learn More€24.00 -
17/30368059 DC:2017
prEN 4857-009. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous. Part 009. Receptacle, round flange, jamnut mounting. Product standard
10/6/2017 - PDF - English - BSI
Learn More€24.00 -
17/30368060 DC:2017
prEN 4857-010. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous. Part 010. Receptacle, hermetic, round flange, jam nut mounting. Product standard
10/6/2017 - PDF - English - BSI
Learn More€24.00 -
DIN EN 3875:2017-10
Aerospace series - Metallic materials, Filler metal for brazing - Technical specification, German and English version EN 3875:2017
10/1/2017 - PDF - English, German - DIN
Learn More€92.62 -
DIN EN 2040:2017-10
Aerospace series - Rectangular steel bars rolled - Dimensions - Tolerance js 16, German and English version EN 2040:2017
10/1/2017 - PDF - English, German - DIN
Learn More€59.63 -
DIN EN 2034:2017-10
Aerospace series - Round steel bars drawn and/or descaled - Dimensions - Tolerance h 11, German and English version EN 2034:2017
10/1/2017 - PDF - English, German - DIN
Learn More€45.98 -
DIN EN 2036:2017-10
Aerospace series - Round steel bars ground - Dimensions - Tolerance h 8, German and English version EN 2036:2017
10/1/2017 - PDF - English, German - DIN
Learn More€45.98 -
NF EN 2037, L12-022 (10/2017)
Aerospace series - Hexagonal steel bars drawn - Dimensions - Tolerances h 11 and h 12
10/1/2017 - Paper - English, French - AFNOR
Learn More€42.11 -
NF EN 2306, L10-701 (10/2017) (R2018)
Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars - Série aérospatiale - Alliage résistant à chaud à base de nickel Ni-Cr20Co3Fe3 Recuit - Barres
10/1/2017 - Paper - English, French - AFNOR
Learn More€43.50 -
NF EN 4808, L43-158 (10/2017)
Aerospace series - Flange couplings - Weld coupling, 90° elbow, in nickel alloy - Inch series
10/1/2017 - Paper - English, French - AFNOR
Learn More€42.11 -
DIN EN 2053:2017-10
Aerospace series - U-section aluminium alloy folded profiles - Dimensions, German and English version EN 2053:2017
10/1/2017 - PDF - English, German - DIN
Learn More€52.90 -
DIN EN 2004-7:2017-10
Aerospace series - Test methods for aluminium and aluminium alloy products - Part 7: Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys, German and English version EN 2004-7:2017.
10/1/2017 - PDF - English, German - DIN
Learn More€59.63 -
DIN EN 3451:2017-10
Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock for annealed forgings - a or D300 mm, German and English version EN 3451:2017
10/1/2017 - PDF - English, German - DIN
Learn More€52.90 -
BS 3L 500:2011+A1:2017
Procedure for inspection, testing and acceptance of wrought magnesium base alloys
9/28/2017 - PDF - English - BSI
Learn More€348.00 -
NBN EN 3875:2017
Aerospace series - Metallic materials, Filler metal for brazing - Technical specification
9/22/2017 - PDF - French - NBN
Learn More€121.00 -
NBN EN 3875:2017
Aerospace series - Metallic materials, Filler metal for brazing - Technical specification
9/22/2017 - PDF - German - NBN
Learn More€121.00 -
NBN EN 3875:2017
Aerospace series - Metallic materials, Filler metal for brazing - Technical specification
9/22/2017 - PDF - English - NBN
Learn More€121.00 -
NBN EN 2036:2017
Aerospace series - Round steel bars ground - Dimensions - Tolerance h 8
9/22/2017 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2036:2017
Aerospace series - Round steel bars ground - Dimensions - Tolerance h 8
9/22/2017 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2034:2017
Aerospace series - Round steel bars drawn and/or descaled - Dimensions - Tolerance h 11
9/22/2017 - PDF - French - NBN
Learn More€37.00 -
NBN EN 2034:2017
Aerospace series - Round steel bars drawn and/or descaled - Dimensions - Tolerance h 11
9/22/2017 - PDF - German - NBN
Learn More€37.00 -
NBN EN 2040:2017
Aerospace series - Rectangular steel bars rolled - Dimensions - Tolerance js 16
9/22/2017 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2040:2017
Aerospace series - Rectangular steel bars rolled - Dimensions - Tolerance js 16
9/22/2017 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2036:2017
Aerospace series - Round steel bars ground - Dimensions - Tolerance h 8
9/22/2017 - PDF - English - NBN
Learn More€58.00 -
NBN EN 2034:2017
Aerospace series - Round steel bars drawn and/or descaled - Dimensions - Tolerance h 11
9/22/2017 - PDF - English - NBN
Learn More€37.00 -
NBN EN 2040:2017
Aerospace series - Rectangular steel bars rolled - Dimensions - Tolerance js 16
9/22/2017 - PDF - English - NBN
Learn More€58.00 -
SAE AMS 6327L:2017-09-22
Steel Bars and Forgings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 125 ksi (862 MPa) Tensile Strength
9/22/2017 - PDF - English - SAE
Learn More€75.00 -
NBN EN 2053:2017
Aerospace series - U-section aluminium alloy folded profiles - Dimensions
9/22/2017 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2053:2017
Aerospace series - U-section aluminium alloy folded profiles - Dimensions
9/22/2017 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2004-7:2017
Aerospace series - Test methods for aluminium and aluminium alloy products - Part 7: Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys
9/22/2017 - PDF - French - NBN
Learn More€58.00 -
NBN EN 2004-7:2017
Aerospace series - Test methods for aluminium and aluminium alloy products - Part 7: Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys
9/22/2017 - PDF - German - NBN
Learn More€58.00 -
NBN EN 2004-7:2017
Aerospace series - Test methods for aluminium and aluminium alloy products - Part 7: Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys
9/22/2017 - PDF - English - NBN
Learn More€58.00 -
NBN EN 2053:2017
Aerospace series - U-section aluminium alloy folded profiles - Dimensions
9/22/2017 - PDF - English - NBN
Learn More€58.00