49.025 : Materials for aerospace construction
-
SAE AMS 4919J:2019-06-10
Titanium Alloy Sheet, Strip, and Plate 6Al - 2Sn - 4Zr - 2Mo - 0.08Si Duplex Annealed
6/10/2019 - PDF - English -
Learn More€79.00 -
SAE AMS-C-6183B:2019-06-10
Cork and Rubber Composition Sheet, for Aromatic Fuel and Oil Resistant Gaskets (Stabilized: Jun 2019)
6/10/2019 - PDF - English -
Learn More€103.00 -
SAE ARP 4462B:2019-06-06
Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts
6/6/2019 - PDF - English -
Learn More€120.00 -
NF L17-144 (06/2019)
Aerospace series - Elastomers - Etylene-Propylene - Class 44 - Characteristics - Série aérospatiale - Elastomères - Ethylène-propylène - Classe 44 - Caractéristiques
6/1/2019 - Paper - English, French -
Learn More€43.50 -
DIN EN 2952:2019-06
Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D50 mm - 1 270 MPa R<(Index)m> 1 550 MPa, German and English version EN 2952:2019
6/1/2019 - PDF - English, German -
Learn More€52.90 -
NF EN 3378, L10-811 (06/2019)
Aerospace series - Titanium TI-P99002 - Annealed - Wires for rivets - 1,6 mm - or = at D - or = at 10 mm - Série aérospatiale - Titane TI - P99002 - Recuit - Fils pou r rivet - 1,6 mm
6/1/2019 - Paper - French -
Learn More€48.00 -
DIN EN 4289:2019-06
Aerospace series - Aluminium alloy AL-P7175 - Forging stock, German and English version EN 4289:2019
6/1/2019 - PDF - English, German -
Learn More€52.90 -
NF L17-123 (06/2019)
Aerospace series - Butadiene - Acrylonitrile rubbers - Class 23 - Characteristics
6/1/2019 - Paper - English, French -
Learn More€43.50 -
NF L17-241 (06/2019)
Aerospace series - Elastomers - Etylene-propylene - Class 41 - Characteristics - Série aérospatiale - Elastomères - Ethylène-propylène - Classe 41 - Caractéristiques
6/1/2019 - Paper - English, French -
Learn More€43.50 -
NF L17-153 (06/2019)
Aerospace series - Elastomers - Silicones - Class 53 - Characteristics - Série aérospatiale - Elastomères - Silicones - Classe 53 - Caractéristiques
6/1/2019 - Paper - English, French -
Learn More€43.50 -
DIN EN 3220:2019-06
Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mmD 30 mm, German and English version EN 3220:2019
6/1/2019 - PDF - English, German -
Learn More€52.90 -
DIN EN 2321:2019-06
Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a150 mm, German and English version EN 2321:2019
6/1/2019 - PDF - English, German -
Learn More€52.90 -
NF EN 3357, L11-006 (06/2019)
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D less than or equal to150 mm - 1 200 MPa less than or equal to Rm less than or equal to 1 400 MPa - Série aérospatiale - Acier FE-PM1503 (X3CrNiMoAl 13-8-2) - Élaboré sous vide par induction et refondu à l'électrode consommable - Mis en solution et vieilli - Barres pour usinage - a ou D = 150 mm - 1 200 MPa = Rm = 1 400 MPa
6/1/2019 - Paper - English, French -
Learn More€43.50 -
DIN EN 2320:2019-06
Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a75 mm, German and English version EN 2320:2019
6/1/2019 - PDF - English, German -
Learn More€52.90 -
UNE-EN 16602-70-38:2019
Space product assurance - High-reliability soldering for surface-mount and mixed technology (Endorsed by Asociación Española de Normalización in June of 2019.)
6/1/2019 - PDF - English -
Learn More€168.00 -
NF EN 2959, L10-720 (06/2019)
Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners - 3 mm - or = at D - or = at 30 mm - Série aérospatiale - Alliage résistant à chaud - NI-PH1302(NiCr20Co13Mo4Ti3Al) - Mis en solution et écroui - Barres pour éléments de fixations forgés - 3 mm = D = 30 mm
6/1/2019 - Paper - English, French -
Learn More€43.50 -
NF EN 3460, L10-820 (06/2019)
Aerospace series - Titanium TI-P99002 - Annealed - Bar for machining - a or D less than or equal to 150 mm - Rm more than equal to 390 MPa
6/1/2019 - Paper - English, French -
Learn More€43.50 -
DIN EN 2699:2019-06
Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mmD 50 mm, German and English version EN 2699:2019
6/1/2019 - PDF - English, German -
Learn More€52.90 -
SAE AMS 6948B:2019-05-28
Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 4Al - 2.5V -1.5 Fe Annealed
5/28/2019 - PDF - English -
Learn More€75.00 -
SAE AMS 4983G:2019-05-28
Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Aged 180 ksi (1241 MPa) Tensile Strength
5/28/2019 - PDF - English -
Learn More€75.00 -
SAE AMS 4984G:2019-05-28
Titanium Alloy Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Solution Heat Treated and Aged 173 ksi (1193 MPa) Tensile Strength
5/28/2019 - PDF - English -
Learn More€75.00 -
NBN EN 3314:2019
Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D ? 75 mm
5/23/2019 - PDF - French -
Learn More€58.00 -
NBN EN 2470:2019
Aerospace series - Steel FE-PA11 - Softened and cold drawn - Wires for rivets - 1 mm ? D ? 10 mm
5/23/2019 - PDF - French -
Learn More€58.00 -
NBN EN 2468:2019
Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm ? a ? 5 mm
5/23/2019 - PDF - French -
Learn More€58.00 -
NBN EN 3470:2019
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D = 150 mm - 1 200 MPa = Rm = 1 400 MPa
5/23/2019 - PDF - English -
Learn More€58.00 -
SAE AMS 5900C:2019-05-23
Steel Bars, Forgings, and Mechanical Tubing, Corrosion Resistant 14Cr - 2.1Mo - 0.30Cb (Nb) - 1.0V (1.05 - 1.15C) Premium Aircraft Quality for Bearing Applications, Double Vacuum Melted
5/23/2019 - PDF - English -
Learn More€79.00 -
NBN EN 3220:2019
Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm = D = 30 mm
5/23/2019 - PDF - English -
Learn More€58.00 -
NBN EN 3470:2019
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ? 150 mm - 1 200 MPa ? Rm ? 1 400 MPa
5/23/2019 - PDF - French -
Learn More€58.00 -
NBN EN 2952:2019
Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ? 50 mm - 1 270 MPa ? Rm ? 1 550 MPa
5/23/2019 - PDF - German -
Learn More€58.00 -
NBN EN 3314:2019
Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D = 75 mm
5/23/2019 - PDF - English -
Learn More€58.00 -
NBN EN 2470:2019
Aerospace series - Steel FE-PA11 - Softened and cold drawn - Wires for rivets - 1 mm ? D ? 10 mm
5/23/2019 - PDF - German -
Learn More€58.00 -
NBN EN 3220:2019
Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm ? D ? 30 mm
5/23/2019 - PDF - French -
Learn More€58.00 -
NBN EN 2468:2019
Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm ? a ? 5 mm
5/23/2019 - PDF - German -
Learn More€58.00 -
NBN EN 3470:2019
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ? 150 mm - 1 200 MPa ? Rm ? 1 400 MPa
5/23/2019 - PDF - German -
Learn More€58.00 -
NBN EN 2952:2019
Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D = 50 mm - 1 270 MPa = Rm = 1 550 MPa
5/23/2019 - PDF - English -
Learn More€58.00 -
NBN EN 2470:2019
Aerospace series - Steel FE-PA11 - Softened and cold drawn - Wires for rivets - 1 mm = D = 10 mm
5/23/2019 - PDF - English -
Learn More€58.00 -
NBN EN 3220:2019
Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm ? D ? 30 mm
5/23/2019 - PDF - German -
Learn More€58.00 -
NBN EN 2468:2019
Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm = a = 5 mm
5/23/2019 - PDF - English -
Learn More€58.00 -
NBN EN 2952:2019
Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ? 50 mm - 1 270 MPa ? Rm ? 1 550 MPa
5/23/2019 - PDF - French -
Learn More€58.00 -
BS EN 4400-6:2019
Aerospace series. Aluminium and aluminium- magnesium- alloys. Technical specification alloy forging stock
5/22/2019 - PDF - English -
Learn More€250.00 -
SAE AS 6450B:2019-05-20
Lubricant Application, Solid Film, Heat Cured, Potable Water, Hydraulic, and Other Fluid Systems (Stabilized: May 2019)
5/20/2019 - PDF - English -
Learn More€79.00 -
SAE AMS 5744F:2019-05-17
Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Consumable Electrode Remelted Heat Treated, 170 ksi (1172 MPa) Tensile Strength
5/17/2019 - PDF - English -
Learn More€66.00 -
SAE AMS 2628B:2019-05-16
Enhanced Ultrasonic Immersion Inspection for Titanium Alloy and other Metal Alloy Billets
5/16/2019 - PDF - English -
Learn More€122.00 -
SAE AMS 5376H:2019-05-14
Alloy, Corrosion and Heat Resistant, Investment Castings 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N As Cast
5/14/2019 - PDF - English -
Learn More€79.00 -
SAE AMS 4431:2019-05-14
Magnesium Alloy, Direct Chill Strand Cast 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A - T6) Solution and Precipitation Heat Treated
5/14/2019 - PDF - English -
Learn More€66.00 -
SAE AMS 3320J:2019-05-10
Elastomer: Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced Heat and Weather Resistant 60 to 80 Type “A” Durometer Hardness
5/10/2019 - PDF - English -
Learn More€70.00 -
€70.00
-
SAE AMS 5412B:2019-05-10
Steel Castings, Vacuum Melted, Vacuum Cast, Investment, Corrosion-Resistant 13Cr - 8.0Ni - 2.2Mo - 1.1Al 195 ksi (1344 MPa) Tensile Strength (Condition H1000) Homogenized, Solution, and Precipitation Heat Treated
5/10/2019 - PDF - English -
Learn More€70.00 -
€60.00
-
SAE AMS 2261L:2019-05-10
Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Bars, Rods, and Wire
5/10/2019 - PDF - English -
Learn More€83.00 -
SAE AMS 5349F:2019-05-10
Steel, Corrosion-Resistant, Investment Castings 13Cr Free Machining, Hardened and Tempered
5/10/2019 - PDF - English -
Learn More€89.00 -
€60.00
-
SAE AMS 4410A:2019-05-07
Aluminum Alloy Plate (7081-T7451) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged (Stabilized: May 2019)
5/7/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 4411A:2019-05-07
Aluminum Alloy Plate (7081-T7651) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged (Stabilized: May 2019)
5/7/2019 - PDF - English -
Learn More€75.00 -
BS EN 2321:2019
Aerospace series. Aluminium alloy 2024-T3. Bars and sections. a = 150 m
5/2/2019 - PDF - English -
Learn More€151.00 -
UNE-EN 2468:2019
Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm = a = 5 mm
5/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 4400-1:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 1: Aluminium and aluminium alloy plate (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€76.00 -
NF EN 2566, L17-210-1 (05/2019)
Aerospace series - Fluorocarbon rubber (FKM) - Hardness 70 IRHD
5/1/2019 - Paper - English, French -
Learn More€43.50 -
NF EN 3001, L17-710 (05/2019)
Aerospace series - Tempered float glass plies for aircraft applications - Technical specification
5/1/2019 - Paper - English, French -
Learn More€54.50 -
NF EN 2510, L10-631 (05/2019)
Aerospace series - Aluminium alloy 2024 - T42 - Drawn tubes for structural applications - Série aérospatiale - Alliage d'aluminium 2024 - - T42 - Tubes étirés pour applications structurales
5/1/2019 - Paper - English, French -
Learn More€43.50 -
WL 3.2374-2:2019-05
Aerospace series - Cast aluminium alloy with approx. 7 Si - 0,3 Mg - Part 2: Investment casting, Text in German and English
5/1/2019 - PDF - English, German -
Learn More€39.35 -
UNE-EN 2699:2019
Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm <= D <= 50 mm (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 4400-6:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 6: Aluminium alloy forging stock (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€66.00 -
NF EN 2798, L17-211-4 (05/2019)
Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD
5/1/2019 - Paper - English, French -
Learn More€43.50 -
UNE-EN 3220:2019
Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm <= D <= 30 mm (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€38.00 -
NF EN 2114, L10-630 (05/2019)
Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D
5/1/2019 - Paper - English, French -
Learn More€43.50 -
UNE-EN 2470:2019
Aerospace series - Steel FE-PA11 - Softened and cold drawn - Wires for rivets - 1 mm = D = 10 mm
5/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 2320:2019
Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a <= 75 mm (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 4400-2:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 2: Aluminium and aluminium alloy sheet and strip (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€76.00 -
NF EN 2567, L17-210-2 (05/2019)
Aerospace series - Fluorocarbon rubber (FKM) - Hardness 80 IRHD
5/1/2019 - Paper - English, French -
Learn More€43.50 -
NF EN 2951, L10-021 (05/2019)
Aerospace series - Metallic materials - Micrographic determination of content of non-metallic inclusions - Série aérospatiale - Matériaux métalliques - Méthode d'essai - Détermination par micrographie de la distribution d'inclusions non-métalliques
5/1/2019 - Paper - English, French -
Learn More€54.50 -
WL 3.2384-4:2019-05
Aerospace series - Cast aluminium alloy with approx. 7 Si - 0,6 Mg - Part 4: Special investment casting, Text in German and English
5/1/2019 - PDF - English, German -
Learn More€39.35 -
UNE-EN 4289:2019
Aerospace series - Aluminium alloy AL-P7175- Forging stock (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 3314:2019
Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D = 75 mm
5/1/2019 - PDF - English -
Learn More€38.00 -
NF EN 2638, L10-632 (05/2019)
Aerospace series - Aluminium alloy 2024 - T3 - Extruded bar and section - 1,2 mm
5/1/2019 - Paper - English, French -
Learn More€54.50 -
WL 2.4964-2:2019-05
Aerospace series - High temperature cobalt alloy with approx. 0,1 C - 20 Cr - 15 W - 10 Ni - Part 2: Bar and forging
5/1/2019 - PDF - German -
Learn More€32.34 -
UNE-EN 3470:2019
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D = 150 mm - 1 200 MPa = Rm = 1 400 MPa
5/1/2019 - PDF - English -
Learn More€38.00 -
UNE-EN 2321:2019
Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a <= 150 mm (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€42.00 -
UNE-EN 4400-3:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€75.00 -
NF EN 2568, L17-210-3 (05/2019)
Aerospace series - Fluorocarbon rubber (FKM) - Hardness 90 IRHD
5/1/2019 - Paper - English, French -
Learn More€43.50 -
UNE-EN 2952:2019
Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D <= 50 mm - 1 270 MPa <= Rm <= 1 550 MPa (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€38.00 -
€89.00 -
19/30395307 DC:2019
BS EN 4884. Aerospace series. Steel X3CrNiMoAl 13-8-2. Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D = 200 mm. 1 200 MPa = Rm = 1 350 MPa
4/30/2019 - PDF - English -
Learn More€24.00 -
19/30395276 DC:2019
BS EN 4883. Aerospace series. Steel X5CrNiCu 17-4 (1.4542). Air melted. Solution treated and precipitation treated. Plates. 6 = a = 100 mm. Rm = 1 070 MPa
4/29/2019 - PDF - English -
Learn More€24.00 -
BS EN 2699:2019
Aerospace series. Aluminium alloy (5086). Annealed and straightened (H111). Drawn bar. 6 mm = D = 50 mm
4/26/2019 - PDF - English -
Learn More€151.00 -
BS EN 3470:2019
Aerospace series. Steel FE-PM1503 (X3CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings - a or D = 150 mm. 1 200 MPa = Rm = 1 400 MPa
4/26/2019 - PDF - English -
Learn More€151.00 -
€54.00
-
BS EN 2468:2019
Aerospace series. Steel FE-PA11. Softened. Tubes. 0,5 mm = a = 5 mm
4/25/2019 - PDF - English -
Learn More€151.00 -
19/30395274 DC:2019
BS EN 4631. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De = 200 mm. 1 150 MPa = Rm = 1 300 MPa
4/24/2019 - PDF - English -
Learn More€24.00 -
19/30395275 DC:2019
BS EN 4882. Aerospace series. Steel X5CrNiCu 17-4 (1.4542). Air melted. Solution treated and precipitation treated. Sheets and strips. a = 6 mm. Rm = 1070 MPa
4/24/2019 - PDF - English -
Learn More€24.00 -
19/30395270 DC:2019
BS EN 4627. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De = 200 mm. 1 150 MPa = Rm = 1 300 MPa
4/24/2019 - PDF - English -
Learn More€24.00 -
19/30395271 DC:2019
BS EN 4628. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De = 200 mm. 1 150 MPa = Rm = 1 300 MPa
4/24/2019 - PDF - English -
Learn More€24.00 -
19/30395273 DC:2019
BS EN 4630. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De = 200 mm. 900 MPa = Rm = 1 050 MPa
4/24/2019 - PDF - English -
Learn More€24.00 -
€101.00
-
BS EN 2924:2019
Aerospace series. Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated, left hand thread. Classification: 600 MPa (at ambient temperature) / 425 °C
4/18/2019 - PDF - English -
Learn More€151.00 -
NBN EN 4400-3:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section
4/17/2019 - PDF - German -
Learn More€163.00 -
NBN EN 4400-1:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 1: Aluminium and aluminium alloy plate
4/17/2019 - PDF - French -
Learn More€163.00 -
SAE ARP 823F:2019-04-17
Minimizing Stress-Corrosion Cracking in Wrought High-Strength Aluminum Alloy Products
4/17/2019 - PDF - English -
Learn More€60.00 -
€58.00
-
NBN EN 2699:2019
Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm ? D ? 50 mm
4/17/2019 - PDF - French -
Learn More€58.00 -
NBN EN 2320:2019
Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a ? 75 mm
4/17/2019 - PDF - German -
Learn More€58.00 -
NBN EN 4400-2:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 2: Aluminium and aluminium alloy sheet and strip
4/17/2019 - PDF - German -
Learn More€163.00 -
NBN EN 4400-6:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 6: Aluminium alloy forging stock
4/17/2019 - PDF - German -
Learn More€121.00 -
NBN EN 2321:2019
Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a = 150 mm
4/17/2019 - PDF - English -
Learn More€58.00 -
NBN EN 4400-3:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section
4/17/2019 - PDF - English -
Learn More€163.00 -
NBN EN 4400-1:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 1: Aluminium and aluminium alloy plate
4/17/2019 - PDF - German -
Learn More€163.00 -
€58.00
-
NBN EN 2320:2019
Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a = 75 mm
4/17/2019 - PDF - English -
Learn More€58.00 -
NBN EN 2699:2019
Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm ? D ? 50 mm
4/17/2019 - PDF - German -
Learn More€58.00 -
NBN EN 2699:2019
Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm = D = 50 mm
4/17/2019 - PDF - English -
Learn More€58.00 -
NBN EN 2321:2019
Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a ? 150 mm
4/17/2019 - PDF - French -
Learn More€58.00 -
BS EN 2470:2019
Aerospace series. Steel FE-PA11. Softened and cold drawn. Wires for rivets. 1 mm = D = 10 mm
4/17/2019 - PDF - English -
Learn More€151.00 -
NBN EN 4400-3:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section
4/17/2019 - PDF - French -
Learn More€163.00 -
NBN EN 4400-2:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 2: Aluminium and aluminium alloy sheet and strip
4/17/2019 - PDF - English -
Learn More€163.00 -
BS EN 3314:2019
Aerospace series. Titanium alloy TI-P64001. Solution treated and aged. Bar for machining. D = 75 mm
4/17/2019 - PDF - English -
Learn More€151.00 -
€58.00
-
NBN EN 4400-6:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 6: Aluminium alloy forging stock
4/17/2019 - PDF - English -
Learn More€121.00 -
NBN EN 2320:2019
Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a ? 75 mm
4/17/2019 - PDF - French -
Learn More€58.00 -
NBN EN 4400-2:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 2: Aluminium and aluminium alloy sheet and strip
4/17/2019 - PDF - French -
Learn More€163.00 -
NBN EN 4400-1:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 1: Aluminium and aluminium alloy plate
4/17/2019 - PDF - English -
Learn More€163.00 -
NBN EN 4400-6:2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 6: Aluminium alloy forging stock
4/17/2019 - PDF - French -
Learn More€121.00 -
NBN EN 2321:2019
Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a ? 150 mm
4/17/2019 - PDF - German -
Learn More€58.00 -
BS EN 2952:2019
Aerospace series. Heat resisting alloy NI-PH2601. Solution treated and cold worked. Bar for forged fasteners. D = 50 mm. 1 270 MPa = Rm = 1 550 MPa
4/16/2019 - PDF - English -
Learn More€151.00 -
€47.00
-
€47.00
-
€47.00
-
SAE AMS 5577J:2019-04-15
Steel, Corrosion and Heat Resistant, Welded Tubing 25Cr - 20Ni (310) Solution Heat Treated
4/15/2019 - PDF - English -
Learn More€66.00 -
€151.00
-
BS EN 4400-3:2019
Aerospace series. Aluminium and aluminium- magnesium- alloys. Technical specification aluminium alloy bar section
4/12/2019 - PDF - English -
Learn More€293.00 -
BS EN 4400-1:2019
Aerospace series. Aluminium and aluminium- magnesium- alloys. Technical specification aluminium alloy plate
4/12/2019 - PDF - English -
Learn More€293.00 -
BS EN 4400-2:2019
Aerospace series. Aluminium and aluminium- magnesium- alloys. Technical specification aluminium alloy sheet strip
4/12/2019 - PDF - English -
Learn More€293.00 -
BS EN 3220:2019
Aerospace series. Heat resisting nickel base alloy (Ni-P101HT). Cold worked and softened. Bar and wire for continuous forging or extrusion for fasteners. 3 mm = D = 30 mm
4/12/2019 - PDF - English -
Learn More€151.00 -
SAE AMS 4650N:2019-04-11
Copper-Beryllium Alloy, Bars, Rods, Shapes, and Forgings 98Cu - 1.9Be Solution Heat Treated TB00 (A)
4/11/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 4533E:2019-04-11
Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)
4/11/2019 - PDF - English -
Learn More€66.00 -
SAE AMS 5754N:2019-04-11
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated
4/11/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 5542P:2019-04-11
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe Annealed
4/11/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 5598F:2019-04-11
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95 (Cb (Nb) + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode, Remelted or Vacuum Induction Melted, Solution Heat Treated, Precipitation-Hardenable
4/11/2019 - PDF - English -
Learn More€75.00 -
€54.00
-
SAE AMS 5668K:2019-04-11
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 7.0Fe - 2.5Ti - 1.0Cb (Nb) - 0.70Al 2100 °F (1149 °C) Solution and Precipitation Heat Treated
4/11/2019 - PDF - English -
Learn More€75.00 -
SAE AMS 2310G:2019-04-05
Qualification Sampling and Testing of Steels for Transverse Tensile Properties
4/5/2019 - PDF - English -
Learn More€66.00 -
€54.00
-
SAE AMS 5028F:2019-04-05
Steel, Welding Wire 1.05Cr - 0.55Ni - 1.0Mo - 0.07V (0.34 - 0.40C) (D6AC) Vacuum Melted, Environment-Controlled Packaging
4/5/2019 - PDF - English -
Learn More€66.00 -
SAE AMS 3305K:2019-04-05
Elastomer: Silicone Rubber, (VMQ) General Purpose 75 – 85 Durometer Type ‘A’ Hardness
4/5/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 2372H:2019-04-05
Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Forgings
4/5/2019 - PDF - English -
Learn More€66.00 -
SAE AMS 5782H:2019-04-05
Steel, Corrosion and Heat Resistant, Welding Wire 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20Ti Vacuum Induction Melted
4/5/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 5029E:2019-04-02
Steel, Welding Wire 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C)(4335 Mod) Vacuum Melted, Environment Controlled Packaging
4/2/2019 - PDF - English -
Learn More€66.00 -
SAE AMS 5528J:2019-04-02
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 17Cr - 7.1Ni - 1.1Al Solution Heat Treated, Precipitation Hardenable
4/2/2019 - PDF - English -
Learn More€87.00 -
€60.00
-
SAE AMS 4986F:2019-04-02
Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 160 ksi (1103 MPa) Tensile Strength
4/2/2019 - PDF - English -
Learn More€75.00 -
SAE AMS 5529K:2019-04-02
Steel, Corrosion Resistant, Sheet and Strip 17Cr - 7.1Ni - 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.100 inch (0.038 to 2.54 mm) Nominal Thickness
4/2/2019 - PDF - English -
Learn More€66.00 -
NF EN 2470, L11-008 (04/2019)
Aerospace series - Steel FE-PA11 - Softened and cold drawn - Wires for rivets - 1 mm
4/1/2019 - Paper - English, French -
Learn More€43.50 -
WL 2.4632-2 Berichtigung 1:2019-04
Aerospace - Heat-resisting nickel alloy with approx. 0,1 C - 20 Cr - 18 Co - 2,5 Ti - 1,5 Al, consumable electrode remelted - Part 2: Bars and forgings, Corrigendum to WL 2.4632-2:1993-08
4/1/2019 - PDF - German -
Learn More€0.00 -
NF EN 2952, L10-719 (04/2019)
Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D
4/1/2019 - Paper - English, French -
Learn More€54.50 -
NF EN 3314, L10-617 (04/2019)
Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D
4/1/2019 - Paper - English, French -
Learn More€43.50 -
UNE-EN 16602-70-54:2019
Space product assurance - Ultracleaning of flight hardware (Endorsed by Asociación Española de Normalización in April of 2019.)
4/1/2019 - PDF - English -
Learn More€106.00 -
NF EN 3220, L11-030 (04/2019)
Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm
4/1/2019 - Paper - English, French -
Learn More€43.50 -
WL 3.7184-100 Berichtigung 1:2019-04
Aerospace - Titanium alloy with approx. 4Al-4Mo-2Sn, Plate, bars and forgings - Part 100: Design and production data, conversion, Corrigendum to WL 3.7184-100:1990-11
4/1/2019 - PDF - German -
Learn More€0.00 -
NF EN 2468, L10-703 (04/2019)
Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm
4/1/2019 - Paper - English, French -
Learn More€43.50 -
NF EN 3470, L10-707 (04/2019)
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D
4/1/2019 - Paper - English, French -
Learn More€43.50 -
ASD-STAN prEN 2002-001:2019
Aerospace series-Metallic materials-Test methods-Part 001: Tensile testing at ambient temperature
3/31/2019 - PDF - English -
Learn More€127.05 -
ASD-STAN prEN 6111:2019
Aerospace series — Ethylene-propylene elastomer (EPM/EPDM) — Hardness 80 IRHD for static sealelements in hydraulic systems for long-term application — Material standard
3/31/2019 - PDF - English -
Learn More€68.25 -
SAE AMS 3681F:2019-03-28
Adhesive, Electrically Conductive Silver-Filled Epoxy Resin (Stabilized: Mar 2019)
3/28/2019 - PDF - English -
Learn More€66.00 -
SAE AMS 3673D:2019-03-28
Cloth, Glass, Aluminum Face, Silicone Rubber Back (Stabilized: Mar 2019)
3/28/2019 - PDF - English -
Learn More€89.00 -
BS EN 2320:2019
Aerospace series. Aluminium alloy 2024-T4. Drawn bar. a = 75 mm
3/28/2019 - PDF - English -
Learn More€151.00 -
SAE AMS 3704B:2019-03-28
Adhesive, Contact Polychloroprene (CR) Rubber, Resin Modified (Stabilized: Mar 2019)
3/28/2019 - PDF - English -
Learn More€79.00 -
SAE AMS 5501F:2019-03-26
Steel, Corrosion Resistant, Sheet, Strip, and Foil 19Cr - 9.5Ni (304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength
3/26/2019 - PDF - English -
Learn More€60.00 -
SAE AMS 5936D:2019-03-26
Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 11Ni - 1.7Ti - 1Mo Vacuum Induction Plus Vacuum Consumable Electrode Remelted Solution Heat Treated, Precipitation Hardenable
3/26/2019 - PDF - English -
Learn More€83.00 -
SAE AMS 4172G:2019-03-26
Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4511 or T4510) Solution Heat Treated and Stress Relieved by Stretching
3/26/2019 - PDF - English -
Learn More€66.00 -
19/30393671 DC:2019
BS EN 3645-002. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous Part 002. Specification of performance and contact arrangements
3/21/2019 - PDF - English -
Learn More€24.00 -
19/30393672 DC:2019
BS EN 3646-001.Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 continuous Part 001. Technical specification
3/21/2019 - PDF - English -
Learn More€24.00 -
19/30393677 DC:2019
BS EN 3646-002. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 continuous Part 002. Specification of performance and contact arrangements
3/21/2019 - PDF - English -
Learn More€24.00 -
19/30393614 DC:2019
BS EN 4868. Aerospace series. Anodic electrodeposition of hexavalent chromium free primer
3/20/2019 - PDF - English -
Learn More€24.00 -
19/30393020 DC:2019
BS EN 3475-705. Aerospace series. Cables, electrical, aircraft use. Test methods Part 705. Contrast measurement
3/8/2019 - PDF - English -
Learn More€24.00 -
SAE AMS 5516R:2019-03-08
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (302) Solution Heat Treated
3/8/2019 - PDF - English -
Learn More€66.00 -
SAE AMS 5521K:2019-03-01
Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 25Cr - 20Ni (310S) Solution Heat Treated (Stabilized: Mar 2019)
3/1/2019 - PDF - English -
Learn More€66.00 -
NF EN 4400-2, L10-603-2 (03/2019)
Aerospace series - Aluminium and aluminium - and magnesium - alloys - Technical specification - Part 2 : aluminium and aluminium alloy sheet and strip - Série aérospatiale
3/1/2019 - Paper - English, French -
Learn More€131.00 -
NF EN 4400-6, L10-603-6 (03/2019)
Aerospace series - Aluminium and aluminium - and magnesium - alloys - Technical specification - Part 6 : aluminium alloy forging stock
3/1/2019 - Paper - English, French -
Learn More€90.00 -
SAE AMS 5507H:2019-03-01
Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 17Cr - 13Ni - 2.5Mo (316L) Solution Heat Treated
3/1/2019 - PDF - English -
Learn More€60.00 -
NF EN 2699, L10-633 (03/2019)
Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm
3/1/2019 - Paper - English, French -
Learn More€43.50 -
DIN EN 2709:2019-03
Aerospace series - Aluminium alloy 2024- - T3510 - Bars and sections - 1,2 mm(a or D) 150 mm - With peripheral coarse grain control, German and English version EN 2709:2018
3/1/2019 - PDF - English, German -
Learn More€59.63 -
DIN EN 2600:2019-03
Aerospace series - Designation of metallic semi-finished products - Rules, German and English version EN 2600:2018
3/1/2019 - PDF - English, German -
Learn More€99.35 -
NF EN 4400-3, L10-603-3 (03/2019)
Aerospace series - Aluminium and aluminium - and magnesium - alloys - Technical specification - Part 3 : aluminium and aluminium alloy bar and section - Série aérospatiale
3/1/2019 - Paper - English, French -
Learn More€131.00 -
NF EN 4289, L10-616 (03/2019)
Aerospace series - Aluminium alloy AL-P7175 - Forging stock
3/1/2019 - Paper - English, French -
Learn More€43.50 -
DIN 29657 Berichtigung 1:2019-03
Aerospace Seamless structural tubes in steel and nickel alloys - Technical specification, Corrigendum 1
3/1/2019 - PDF - German -
Learn More€0.00 -
NF EN 2321, L10-613 (03/2019)
Aerospace series - Aluminium Alloy 2024-T3 - Bars and Sections - a
3/1/2019 - Paper - English, French -
Learn More€54.50 -
NF EN 2320, L10-619 (03/2019)
Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a less than or equal to 75 mm - Série aérospatiale - Alliage d'aluminium 2024-T4 - Barres étirées - a = 75 mm
3/1/2019 - Paper - English, French -
Learn More€43.50 -
NF EN 4400-1, L10-603-1 (03/2019)
Aerospace series - Aluminium and aluminium - and magnesium - alloys - Technical specification - Part 1 : aluminium and aluminium alloy plate - Série aérospatiale
3/1/2019 - Paper - English, French -
Learn More€131.00 -
DIN EN 2715:2019-03
Aerospace series - Macrographic examination of aluminium and aluminium alloy wrought products, forging stock and forgings, German and English version EN 2715:2018
3/1/2019 - PDF - English, German -
Learn More€45.98 -
SAE AMS 3303L:2019-02-27
Elastomer: Silicone, Rubber (MQ/VMQ) General Purpose 55 - 65 Durometer Type "A" Hardness
2/27/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 4165J:2019-02-18
Aluminum Alloy, Extrusions 4.4Cu – 1.5Mg – 0.60Mn (2024-T3511) Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, and Straightened
2/18/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 4064G:2019-02-13
Aluminum Alloy, Clad Two Sides Sheet 1.25Mn - 0.12Cu (No. 12-0 Brazing Sheet) Annealed
2/13/2019 - PDF - English -
Learn More€60.00 -
19/30391410 DC:2019
BS EN 4708-203. Aerospace series. Sleeves, heat-shrinkable, for binding, insulation and identification Part 203. Polyvinylidene fluoride (PVDF). Identification sleeves. Operating Temperature range -55°C to 225°C. Product Standard
2/12/2019 - PDF - English -
Learn More€24.00 -
19/30391326 DC:2019
BS EN 4708-201. Sleeves, heat-shrinkable, for binding, insulation and identification Part 201. Polyolefin sleeves. Operating Temperature range -55°C to 135°C. Product standard
2/10/2019 - PDF - English -
Learn More€24.00 -
SAE AMS 3277K:2019-02-08
Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)
2/8/2019 - PDF - English -
Learn More€101.00 -
19/30391266 DC:2019
BS EN 3197. Aerospace series. Design and installation of aircraft electrical and optical interconnection systems
2/7/2019 - PDF - English -
Learn More€43.00 -
SAE AMS 5592G:2019-02-07
Iron-Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 44Fe - 18.5Cr - 35Ni - 1.15Si Solution Heat Treated
2/7/2019 - PDF - English -
Learn More€66.00 -
19/30391019 DC:2019
BS EN 2854-002. Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm2. Operating temperatures between -55°C 260°C Part 002. General
2/7/2019 - PDF - English -
Learn More€24.00 -
SAE AMS 5382K:2019-02-07
Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings 54Co - 25.5Cr - 10.5Ni - 7.5W As-Cast
2/7/2019 - PDF - English -
Learn More€83.00 -
SAE AMS 4124F:2019-02-06
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged
2/6/2019 - PDF - English -
Learn More€66.00 -
SAE AMS 5853D:2019-02-04
Steel, Corrosion and Heat-Resistant, Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1800 °F (982 °C) Solution Treated and Work-Strengthened Capable of 160 ksi (1103 MPa) Tensile Strength
2/4/2019 - PDF - English -
Learn More€60.00
