43 : Road vehicles engineering
-
ISO 3208:1974 (R2024)
Road vehicles
Evaluation of protrusions inside passenger cars
10/1/1974 - Paper - English -
Learn More€48.00 -
ISO 3208:1974 (R2024)
Road vehicles
Evaluation of protrusions inside passenger cars
10/1/1974 - Paper - French -
Learn More€48.00 -
€25.67 -
NF R33-103 (07/1974) (R2009)
Lighting generator for cycles. Technical requirements and tests.
7/1/1974 - Paper - French -
Learn More€25.67 -
€25.50
-
NF R33-101 (07/1974) (R2009)
Lighting generator for cycles. Interchangeability characteristics.
7/1/1974 - Paper - French -
Learn More€25.67 -
BS 3214:1974
Specification for locking connectors for battery operated vehicles (320 ampere rating)
6/18/1974 - PDF - English -
Learn More€180.00 -
€34.67
-
€34.67
-
NF R40-012 (02/1974) (R2014)
Dimensional symbols of road trains tractor and semi-trailer-truck and trailer.
2/1/1974 - Paper - French -
Learn More€48.00 -
€48.00
-
€48.00
-
BS 3092:1973 (R2017)
Specification for main friction clutches, main power-take-off assemblies and associated attachments for internal combustion engines
2/28/1973 - PDF - English -
Learn More€293.00 -
€25.67
-
€25.67
-
€25.67
-
€25.67
-
€22.99 -
NF R10-101 (11/1971) (R2011)
Anthropomorphic dummy for dynamic testing of motor vehicles.
11/1/1971 - Paper - French -
Learn More€48.00 -
BS AU 156:1971
Recommendations for aiming of headlamps and auxiliary lamps on motor vehicles
9/13/1971 - PDF - English -
Learn More€180.00 -
JASO Z104:1971
Roll-over test procedure without collision for passenger cars
6/10/1971 - PDF - Japanese -
Learn More€52.00 -
€47.00 -
€25.67
-
€47.00
-
€34.67
-
DIN 72552-3:1971-03
Terminal markings for motor vehicles, examples for application on circuit diagrams
3/1/1971 - PDF - German -
Learn More€39.35 -
DIN 72552-1:1971-03
Terminal markings for motor vehicles, scope, principles, requirements
3/1/1971 - PDF - German -
Learn More€22.99 -
€52.00
-
BS AU 146b:1970
Specification for standard automatic roller-type coupling for semi-trailers not exceeding 7¼ tons laden weight
12/18/1970 - PDF - English -
Learn More€151.00 -
BS AU 30b:1970
Specification for standard automatic roller-type coupling for semi-trailers of 7 tons to 14¾ tons laden weight
12/18/1970 - PDF - English -
Learn More€151.00 -
€25.67
-
€25.50
-
NF R95-403 (10/1970) (R2001)
Pipe fittings with double taper sleeves. Coupling dimensions.
10/1/1970 - Paper - French -
Learn More€25.67 -
BS AU 2a:1970
Specification for dimensions of 3½ - 4½ in diameter fifth wheel king pin for use with extra heavy duty semi-trailers
8/28/1970 - PDF - English -
Learn More€151.00 -
NF R41-150 (06/1970)
Trailers and semi-trailers. Air-pressure braking connections.
6/1/1970 - Paper - French -
Learn More€25.67 -
€180.00
-
BS AU 3:1970
Specification for clearance dimensions and fifth wheel positions for tractors and semi-trailers
3/20/1970 - PDF - English -
Learn More€151.00 -
€22.99
-
DIN 74050:1969-12
Mechanical connections for motor vehicles and their trailers, Dimensions for interchangeability of international traffic
12/1/1969 - PDF - German -
Learn More€22.99 -
DIN 43593:1969-12
Lead-acid and alkaline batteries, type plate for traction batteries
12/1/1969 - PDF - German -
Learn More€22.99 -
BS 4464:1969
Specification for spring washers for general engineering and automobile purposes. Metric series
5/19/1969 - PDF - English -
Learn More€180.00 -
€25.67
-
€22.99
-
€22.99
-
BS AU 40-4a:1966
Specification for motor vehicle lighting and signalling equipment Sealed beam headlamps
4/27/1966 - PDF - English -
Learn More€180.00 -
€22.99
-
€22.99
-
BS AU 91:1965
Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system)
9/30/1965 - PDF - English -
Learn More€151.00 -
BS AU 47:1965
Specification for advance warning triangle to indicate temporary obstructions
1/15/1965 - PDF - English -
Learn More€151.00 -
BS AU 26:1964
Specification for towing jaw for use between trailers of 5-16 tons gross weight and towing vehicle
6/15/1964 - PDF - English -
Learn More€151.00 -
BS AU 29:1964
Specification for drawbar eyes and forecarriage pins for connection between trailers of 5-35 tons gross weight and towing vehicle
6/15/1964 - PDF - English -
Learn More€151.00 -
BS AU 27:1964
Specification for towing hook for use between trailers of 5-35 tons gross weight and towing vehicle
6/15/1964 - PDF - English -
Learn More€151.00 -
BS AU 25:1964
Specification for towing hook for use between trailers of 5-14 tons gross weight and towing vehicle
6/15/1964 - PDF - English -
Learn More€151.00 -
BS AU 28:1964
Specification for towing jaw for use between trailers of 5-35 tons gross weight and towing vehicle
6/15/1964 - PDF - English -
Learn More€151.00 -
BS AU 5:1963
Specification for dimensions of a 'contact' type coupling for vacuum and pressure braking systems on trailers and semi-trailers
2/21/1963 - PDF - English -
Learn More€151.00 -
€25.67
-
€25.50
-
€25.67
-
€25.67
-
€25.67
-
€12.67
-
€22.99
-
€25.50
-
DIN 73021:1953-06
Designation of the rotational direction, the cylinders and the ignition circuits of motorcar engines
6/1/1953 - PDF - German -
Learn More€22.99 -
€25.67
-
€25.67
-
BS 1802:1951
Specification for steel spring washers for general engineering and automobile purposes
11/26/1951 - PDF - English -
Learn More€151.00 -
€25.50
-
€25.67
-
€93.60 -
UNE-EN IEC 63281-1:2023
E-Transporters - Part 1: Terminology and classification (Endorsed by Asociación Española de Normalización in December of 2023.)
4/23/2024 - PDF - English -
Learn More€60.00 -
UNE-CLC IEC/TS 61851-3-2:2023
Electric vehicle conductive charging system - Part 3-2: DC EV supply equipment where protection relies on double or reinforced insulation - Particular requirements for portable and mobile equipment (Endorsed by Asociación Española de Normalización in February of 2024.)
4/23/2024 - PDF - English -
Learn More€76.00 -
UNE-EN IEC 62321-11:2024
Determination of certain substances in electrotechnical products - Part 11: Tris(2-chloroethyl) phosphate (TCEP) in plastics by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS) (Endorsed by Asociación Española de Normalización in March of 2024.)
4/23/2024 - PDF - English -
Learn More€76.00 -
UNE-CLC IEC/TS 61851-3-6:2023
Electric vehicles conductive charging system - Part 3-6: DC EV supply equipment where protection relies on double or reinforced insulation - Voltage converter unit communication (Endorsed by Asociación Española de Normalización in February of 2024.)
4/23/2024 - PDF - English -
Learn More€176.00 -
€85.25 -
Core Tools 7 Book Bundle - english
Set includes the latest editions of the Core Tool manuals: APQP, CP, PPAP, FMEA, MSA, SPC & AIAG/VDA FMEA
The Automotive Quality Core Tools are the building blocks of an effective quality management system. This bundled cost saving set includes 7 manuals:
⦁ AIAG Product Part Approval Process (PPAP)
⦁ AIAG Advanced Product Quality Planning (APQP) *** New ***
⦁ AIAG Control Plan (CP) *** New ***
⦁ AIAG Statistical Process Control (SPC)
⦁ AIAG Measurement System Analysis (MSA)
⦁ AIAG Potential Failure Mode and Effects Analysis (FMEA)
⦁ AIAG/VDA FMEA Handbook
4/23/2024 - Paper - English -
Learn More€689.00 -
UNE-EN IEC 60809:2021/A1:2023
Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements (Endorsed by Asociación Española de Normalización in January of 2024.)
4/23/2024 - PDF - English -
Learn More€64.00 -
UNE-CLC IEC/TS 61851-3-4:2023
Electric vehicles conductive charging system - Part 3-4: DC EV supply equipment where protection relies on double or reinforced insulation - General definitions and requirements for CANopen communication (Endorsed by Asociación Española de Normalización in February of 2024.)
4/23/2024 - PDF - English -
Learn More€138.00 -
Core Tools 6 Book Bundle - english
Set includes the latest editions of the Core Tool manuals: APQP, CP, PPAP, MSA, SPC & AIAG/VDA FMEA
The Automotive Quality Core Tools are the building blocks of an effective quality management system. This bundled cost saving set includes 6 manuals:
⦁ AIAG Product Part Approval Process (PPAP)
⦁ AIAG Advanced Product Quality Planning (APQP) *** New ***
⦁ AIAG Control Plan (CP) *** New ***
⦁ AIAG Statistical Process Control (SPC)
⦁ AIAG Measurement System Analysis (MSA)
⦁ AIAG/VDA FMEA Handbook
4/23/2024 - Paper - English -
Learn More€585.00 -
€1,737.00 -
€93.65
-
UNE-CLC IEC/TS 61851-3-1:2023
Electric vehicles conductive charging system - Part 3-1: DC EV supply equipment where protection relies on double or reinforced insulation - General rules and requirements for stationary equipment (Endorsed by Asociación Española de Normalización in February of 2024.)
4/23/2024 - PDF - English -
Learn More€95.00 -
UNE-CLC IEC/TS 61851-3-7:2023
Electric vehicles conductive charging system - Part 3-7: DC EV supply equipment where protection relies on double or reinforced insulation - Battery system communication (Endorsed by Asociación Española de Normalización in February of 2024.)
4/23/2024 - PDF - English -
Learn More€140.00 -
€88.08 -
UNE-CLC IEC/TS 61851-3-5:2023
Electric vehicles conductive charging system - Part 3-5: DC EV supply equipment where protection relies on double or reinforced insulation - Pre-defined communication parameters and general application objects (Endorsed by Asociación Española de Normalización in February of 2024.)
4/23/2024 - PDF - English -
Learn More€182.00
