31.240 : Mechanical structures for electronic equipment
-
UNE-EN IEC 61969-1:2023
Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines (Endorsed by Asociación Española de Normalización in May of 2023.)
5/5/2023 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN IEC 60286-2:2022
Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€75.00 -
UNE-EN IEC 60286-3:2022
Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€98.00 -
UNE-EN IEC 61587-1:2022
Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test setups and safety aspects (Endorsed by Asociación Española de Normalización in March of 2022.)
3/1/2022 - PDF - English - AENOR
Learn More€90.00 -
UNE-EN IEC 61760-2:2021
Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide (Endorsed by Asociación Española de Normalización in October of 2021.)
10/1/2021 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN 60286-1:2017/A1:2021
Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (Endorsed by Asociación Española de Normalización in July of 2021.)
7/1/2021 - PDF - English - AENOR
Learn More€42.00 -
UNE-EN IEC 61587-6:2021
Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets (Endorsed by Asociación Española de Normalización in July of 2021.)
7/1/2021 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN IEC 61760-3:2021
Surface mounting technology - Part 3: Standard method for the specification of components for through-hole reflow (THR) soldering (Endorsed by Asociación Española de Normalización in April of 2021.)
4/1/2021 - PDF - English - AENOR
Learn More€75.00 -
UNE-EN IEC 61760-1:2020
Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs) (Endorsed by Asociación Española de Normalización in November of 2020.)
11/1/2020 - PDF - English - AENOR
Learn More€88.00 -
UNE-EN IEC 62966-2:2020
Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 2: Details of air flow, air separation and air cooling requirements (Endorsed by Asociación Española de Normalización in November of 2020.)
11/1/2020 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN IEC 61969-3:2020
Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN IEC 61969-1:2020
Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines (Endorsed by Asociación Española de Normalización in August of 2020.)
8/1/2020 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN IEC 62610-6:2020
Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 Series - Part 6: Air recirculation and bypass of indoor cabinets (Endorsed by Asociación Española de Normalización in June of 2020.)
6/1/2020 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 61191-2:2017/AC:2019-10
Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies (Endorsed by Asociación Española de Normalización in December of 2019.)
12/1/2019 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN IEC 60917-1:2019
Modular order for the development of mechanical structures for electrical and electronic equipment practices - Part 1: Generic standard (Endorsed by Asociación Española de Normalización in December of 2019.)
12/1/2019 - PDF - English - AENOR
Learn More€74.00 -
UNE-EN IEC 62966-1:2019
Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 1: Dimensions and mechanical requirements (Endorsed by Asociación Española de Normalización in June of 2019.)
6/1/2019 - PDF - English - AENOR
Learn More€66.00 -
UNE-EN IEC 60286-3:2019
Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (Endorsed by Asociación Española de Normalización in April of 2019.)
4/1/2019 - PDF - English - AENOR
Learn More€80.00 -
UNE-EN IEC 60297-3-110:2018
Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-110: Residential racks and cabinets for smart houses (Endorsed by Asociación Española de Normalización in December of 2018.)
12/1/2018 - PDF - English - AENOR
Learn More€66.00 -
UNE-EN IEC 61191-1:2018
Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies (Endorsed by Asociación Española de Normalización in December of 2018.)
12/1/2018 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN IEC 62610-2:2018
Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling (Endorsed by Asociación Española de Normalización in August of 2018.)
8/1/2018 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN 61191-4:2017
Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies (Endorsed by Asociación Española de Normalización in December of 2017.)
12/1/2017 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN 60286-1:2017
Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (Endorsed by Asociación Española de Normalización in December of 2017.)
12/1/2017 - PDF - English - AENOR
Learn More€58.00 -
UNE-EN 61191-2:2017
Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies (Endorsed by Asociación Española de Normalización in November of 2017.)
11/1/2017 - PDF - English - AENOR
Learn More€76.00 -
UNE-EN 61191-3:2017
Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies (Endorsed by Asociación Española de Normalización in October of 2017.)
10/1/2017 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN 61587-6:2017
Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets (Endorsed by Asociación Española de Normalización in September of 2017.)
9/1/2017 - PDF - English - AENOR
Learn More€62.00 -
UNE-EN 61587-1:2017
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation (Endorsed by Asociación Española de Normalización in June of 2017.)
6/1/2017 - PDF - English - AENOR
Learn More€78.00 -
UNE-EN 62739-3:2017
Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods (Endorsed by Asociación Española de Normalización in May of 2017.)
5/1/2017 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 62739-2:2016
Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 2: Erosion test method for metal materials with surface processing (Endorsed by AENOR in November of 2016.)
11/1/2016 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN 62610-5:2016
Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 5: Cooling performance evaluation for indoor cabinets (Endorsed by AENOR in August of 2016.)
8/1/2016 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN 60297-3-109:2016
Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-109: Dimensions of chassis for embedded computing devices (Endorsed by AENOR in March of 2016.)
3/1/2016 - PDF - English - AENOR
Learn More€66.00 -
UNE-EN 60286-2:2015
Packaging of components for automatic handling - Part 2: Packaging of components with unidirectional leads on continuous tapes (Endorsed by AENOR in July of 2015.)
7/1/2015 - PDF - English - AENOR
Learn More€76.00 -
UNE-EN 60297-3-108:2015
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of R-type subracks and plug-in units (Endorsed by AENOR in February of 2015.)
2/1/2015 - PDF - English - AENOR
Learn More€70.00 -
UNE-EN 61587-5:2014
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks and plug-in units (Endorsed by AENOR in May of 2014.)
5/1/2014 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN 62610-4:2013
Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets (Endorsed by AENOR in January of 2014.)
1/1/2014 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN 60286-4:2013
Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms (Endorsed by AENOR in January of 2014.)
1/1/2014 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN 62739-1:2013
Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 1: Erosion test method for metal materials without surface processing (Endorsed by AENOR in October of 2013.)
10/1/2013 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN 61587-3:2013
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets and subracks (Endorsed by AENOR in June of 2013.)
6/1/2013 - PDF - English - AENOR
Learn More€62.00 -
UNE-EN 60917-2-5:2012
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-5: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Cabinet interface dimensions for miscellaneous equipment (Endorsed by AENOR in November of 2012.)
11/1/2012 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN 61587-4:2012
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 4: Combination of performance levels for modular cabinets (Endorsed by AENOR in November of 2012.)
11/1/2012 - PDF - English - AENOR
Learn More€59.00 -
UNE-EN 60297-3-107:2012
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-107: Dimensions of subracks and plug-in units, small form factor (Endorsed by AENOR in June of 2012.)
6/1/2012 - PDF - English - AENOR
Learn More€74.00 -
UNE-EN 61969-2:2012
Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions (Endorsed by AENOR in April of 2012.)
4/1/2012 - PDF - English - AENOR
Learn More€38.00 -
UNE-EN 61587-2:2011
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinets and racks (Endorsed by AENOR in February of 2012.)
2/1/2012 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN 60297-3-106:2010
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1 (Endorsed by AENOR in July of 2010.)
7/1/2010 - PDF - English - AENOR
Learn More€62.00 -
UNE-EN 60917-2-4:2010
Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-4: Sectional specification - Interface coordination dimensions for the 25 mm equipment practice - Adaptation dimensions for subracks or chassis applicable in cabinets or racks in accordance with IEC 60297-3-100 (19 in) (Endorsed by AENOR in July of 2010.)
7/1/2010 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN 60297-3-105:2009
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-105: Dimensions and design aspects for 1U high chassis (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English - AENOR
Learn More€62.00 -
UNE-EN 60297-3-100:2009
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English - AENOR
Learn More€62.00 -
UNE-EN 60297-3-104:2006
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-104: Connector dependent interface dimensions of subracks and plug-in units (IEC 60297-3-104:2006 ) (Endorsed by AENOR in September of 2006.)
9/1/2006 - PDF - English - AENOR
Learn More€62.00 -
UNE-EN 60917-2-3:2006
Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Extended detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units (IEC 60917-2-3:2006). (Endorsed by AENOR in September of 2006.)
9/1/2006 - PDF - English - AENOR
Learn More€75.00 -
UNE-EN 62194:2005
Method of evaluating the thermal performance of enclosures (Endorsed by AENOR in December of 2005.)
12/1/2005 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 60297-3-101:2004
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-101: Subracks and associated plug-in units (Endorsed by AENOR in November of 2004.)
11/1/2004 - PDF - English - AENOR
Learn More€68.00 -
UNE-EN 60297-3-102:2004
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-102: Injector/extractor handle (Endorsed by AENOR in November of 2004.)
11/1/2004 - PDF - English - AENOR
Learn More€58.00 -
UNE-EN 60297-3-103:2004
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-103: Keying and alignment pin (Endorsed by AENOR in November of 2004.)
11/1/2004 - PDF - English - AENOR
Learn More€63.00 -
€57.00 -
UNE-EN 60917-2-2:1997
MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES. PART 2: SECTIONAL SPECIFICATION. INTERFACE CO-ORDINATION DIMENSIONS FOR THE 25 MM EQUIPMENT PRACTICE. SECTION 2: DETAIL SPECIFICATION. DIMENSIONS FOR SUBRACKS, CHASSIS, BACKPLANES, FRONT PANELS AND PLUG-IN UNITS.
9/19/1997 - PDF - Spanish - AENOR
Learn More€76.00 -
UNE-EN 60917-2-2:1997
MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES. PART 2: SECTIONAL SPECIFICATION. INTERFACE CO-ORDINATION DIMENSIONS FOR THE 25 MM EQUIPMENT PRACTICE. SECTION 2: DETAIL SPECIFICATION. DIMENSIONS FOR SUBRACKS, CHASSIS, BACKPLANES, FRONT PANELS AND PLUG-IN UNITS.
9/19/1997 - PDF - English - AENOR
Learn More€91.20 -
UNE-EN 60917-2:1994
MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES. PART 2: SECTIONAL SPECIFICATION. INTERFACE COORDINATION DIMENSIONS FOR THE 25 MM EQUIPMENT PRACTICE. (Endorsed by AENOR in December of 1995.)
12/1/1995 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN 60917-2-1:1995
MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES. PART 2: SECTIONAL SPECIFICATION. INTERFACE CO-ORDINATION DIMENSIONS FOR THE 25 MM EQUIPMENT PRACTICE. SECTION 1: DETAIL SPECIFICATION. DIMENSIONS FOR CABINET AND RACKS. (Endorsed by AENOR in December of 1995.)
12/1/1995 - PDF - English - AENOR
Learn More€58.00 -
UNE-EN IEC 61969-3:2024
Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects (Endorsed by Asociación Española de Normalización in February of 2024.)
4/19/2024 - PDF - English - AENOR
Learn More€68.00
