31.220.10 : Plug-and-socket devices. Connectors
-
UNE-EN IEC 61076-3-124:2019/AC:2020-04
Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz (Endorsed by Asociación Española de Normalización in June of 2020.)
6/1/2020 - PDF - English -
Learn More€0.00 -
UNE-EN 60603-7-81:2016/AC:2017-07
Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz (Endorsed by Asociación Española de Normalización in September of 2017.)
9/1/2017 - PDF - English -
Learn More€0.00 -
DIN EN 60512-5-1 Berichtigung 1:2015-06
Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests -Test 5a: Temperature rise (IEC 60512-5-1:2002), German version EN 60512-5-1:2002, Corrigendum to DIN EN 60512-5-1:2003-01
6/1/2015 - PDF - German -
Learn More€0.00 -
DIN EN 60603-13 Berichtigung 1:2013-09
Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) (IEC 60603-13:1995), German version EN 60603-13:1998, Corrigendum to DIN EN 60603-13:1998-09
9/1/2013 - PDF - German -
Learn More€0.00 -
DIN EN 61076-3-101 Berichtigung 1:2012-07
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line (IEC 61076-3-101:1997), German version EN 61076-3-101:1997, Corrigendum to DIN EN 61076-3-101:1998-05, (IEC-Cor. :2010 to IEC 61076-3-101:1997)
7/1/2012 - PDF - German -
Learn More€0.00 -
DIN EN 61076-4-101 Berichtigung 1:2010-10
Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 - (IEC 61076-4-101:2001), German version EN 61076-4-101:2001, Corrigendum to DIN EN 61076-4-101:2002-09, (IEC-Cor. 1:2003 to IEC 61076-4-101:2001)
10/1/2010 - PDF - German -
Learn More€0.00 -
DIN EN 60512-12-5 Berichtigung 1:2008-11
Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method (IEC 60512-12-5:2006), German version EN 60512-12-5:2006, Corrigendum to DIN EN 60512-12-5:2006-11, German version CENELEC-Cor.:2006 to EN 60512-12-5:2006
11/1/2008 - PDF - German -
Learn More€0.00 -
DIN EN 60512-12-3 Berichtigung 1:2008-11
Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006), German version EN 60512-12-3:2006, Corrigendum to DIN EN 60512-12-3:2006-11, German version CENELEC-Cor.:2006 to EN 60512-12-3:2006
11/1/2008 - PDF - German -
Learn More€0.00 -
DIN EN 175101-809 Berichtigung 1:2008-11
Detail specification - Two-part connectors for printed boards having a grid of 2, 54 mm, short version in compliance with CECC 75101-801, with assessed quality, German version EN 175101-809:2004, Corrigendum to DIN EN 175101-809:2004-11, German version CENELEC-Cor.:2006 to EN 175101-809:2004
11/1/2008 - PDF - German -
Learn More€0.00 -
DIN EN 60512-13-1 Berichtigung 1:2008-11
Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces (IEC 60512-13-1:2006), German version EN 60512-13-1:2006, Corrigendum to DIN EN 60512-13-1:2006-11, German version CENELEC-Cor.:2006 to EN 60512-13-1:2006
11/1/2008 - PDF - German -
Learn More€0.00 -
DIN EN 60512-12-4 Berichtigung 1:2008-11
Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method (IEC 60512-12-4:2006), German version EN 60512-12-4:2006, Corrigendum to DIN EN 60512-12-4:2006-11, German version CENELEC-Cor.:2006 to EN 60512-12-4:2006
11/1/2008 - PDF - German -
Learn More€0.00 -
DIN EN 60512-12-2 Berichtigung 1:2008-11
Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method (IEC 60512-12-2:2006), German version EN 60512-12-2:2006, Corrigendum to DIN EN 60512-12-2:2006-11, German version CENELEC-Cor.:2006 to EN 60512-12-2:2006
11/1/2008 - PDF - German -
Learn More€0.00 -
DIN EN 60512-13-5 Berichtigung 1:2008-11
Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006), German version EN 60512-13-5:2006, Corrigendum to DIN EN 60512-13-5:2006-11, German version CENELEC-Cor.:2006 to EN 60512-13-5:2006
11/1/2008 - PDF - German -
Learn More€0.00 -
DIN EN 60512-13-2 Berichtigung 1:2008-11
Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces (IEC 60512-13-2:2006), German version EN 60512-13-2:2006, Corrigendum to DIN EN 60512-13-2:2006-11, German version CENELEC-Cor.:2006 to EN 60512-13-2:2006
11/1/2008 - PDF - German -
Learn More€0.00 -
UNE-EN 60512-13-5:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method
5/9/2007 - PDF - English -
Learn More€0.00 -
UNE-EN 60512-13-5:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method
5/9/2007 - PDF - Spanish -
Learn More€0.00 -
UNE-EN 60512-12-4:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method
4/25/2007 - PDF - Spanish -
Learn More€0.00 -
UNE-EN 60512-12-3:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
4/25/2007 - PDF - Spanish -
Learn More€0.00 -
UNE-EN 60512-12-5:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
4/25/2007 - PDF - English -
Learn More€0.00 -
UNE-EN 60512-12-4:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method
4/25/2007 - PDF - English -
Learn More€0.00 -
UNE-EN 60512-12-3:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
4/25/2007 - PDF - English -
Learn More€0.00 -
UNE-EN 60512-12-5:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
4/25/2007 - PDF - Spanish -
Learn More€0.00 -
UNE-EN 175101-809:2004 CORR:2005
Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality (Endorsed by AENOR in September of 2005.)
9/1/2005 - PDF - English -
Learn More€0.00