31.220.10 : Plug-and-socket devices. Connectors
-
UNE-EN IEC 61076-3-106:2023
Connectors for electrical and electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface (Endorsed by Asociación Española de Normalización in October of 2023.)
10/6/2023 - PDF - English - AENOR
Learn More€78.00 -
UNE-EN IEC 61076-2-115:2023
Connectors for electrical and electronic equipment - Product requirements - Part 2-115: Circular connectors - Detail specification for 12-pole shielded connectors with 2 A rated current and IP65/IP67 metal housing with push-pull locking (Endorsed by Asociación Española de Normalización in August of 2023.)
8/2/2023 - PDF - English - AENOR
Learn More€76.00 -
UNE-EN IEC 61076-3-126:2023
Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-pull locking (Endorsed by Asociación Española de Normalización in April of 2023.)
4/21/2023 - PDF - English - AENOR
Learn More€87.00 -
UNE-EN IEC 60512-27-200:2022
Connectors for electrical and electronic equipment - Tests and measurements - Part 27-200: Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors - Tests 27a to 27g (Endorsed by Asociación Española de Normalización in December of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€74.00 -
UNE-EN IEC 63171-5:2022
Connectors for electrical and electronic equipment - Part 5: Detail specification for 2-way M8 and M12 circular connectors, shielded or unshielded, free and fixed - Mechanical mating information, pin assignment and additional requirements for Type 5 (Endorsed by Asociación Española de Normalización in December of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€75.00 -
UNE-EN IEC 61076-2-116:2023
Connectors for electrical and electronic equipment - Product requirements - Part 2 -116: Detail specification for circular connectors size 15 with up to 3+PE power contacts and auxiliary contacts, with bayonet-locking (Endorsed by Asociación Española de Normalización in March of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€87.00 -
UNE-EN IEC 60512-99-002:2022
Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (Endorsed by Asociación Española de Normalización in April of 2022.)
4/1/2022 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN IEC 61076-2-010:2021
Connectors for electrical and electronic equipment - Product requirements - Part 2-010: Circular connectors - Detail specification for connectors with outer or inner push-pull locking mechanism, based on mating interfaces according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 and IEC 61076-2-113 (Endorsed by Asociación Española de Normalización in October of 2021.)
10/1/2021 - PDF - English - AENOR
Learn More€95.00 -
UNE-EN IEC 61076-2-011:2021
Connectors for electrical and electronic equipment - Product requirements - Part 2-011: Circular connectors - Detail specification for B12 bayonet coupling connectors based on mating interfaces according to IEC 61076-2-101 and IEC 61076-2-109 (Endorsed by Asociación Española de Normalización in October of 2021.)
10/1/2021 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN IEC 61076-3-122:2021
Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz and current-carrying capacity in industrial environments (Endorsed by Asociación Española de Normalización in July of 2021.)
7/1/2021 - PDF - English - AENOR
Learn More€76.00 -
UNE-EN IEC 63171:2021
Connectors for electrical and electronic equipment - Shielded or unshielded free and fixed connectors for balanced single-pair data transmission with current-carrying capacity - General requirements and tests (Endorsed by Asociación Española de Normalización in May of 2021.)
5/1/2021 - PDF - English - AENOR
Learn More€78.00 -
UNE-EN IEC 60352-7:2021
Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in March of 2021.)
3/1/2021 - PDF - English - AENOR
Learn More€75.00 -
UNE-EN IEC 61076-2-114:2020
Connectors for electrical and electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for connectors with M8 screw-locking with power contacts and signal contacts for data transmission up to 100 MHz (Endorsed by Asociación Española de Normalización in January of 2021.)
1/1/2021 - PDF - English - AENOR
Learn More€81.00 -
UNE-EN IEC 60603-7:2020
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (Endorsed by Asociación Española de Normalización in January of 2021.)
1/1/2021 - PDF - English - AENOR
Learn More€98.00 -
UNE-EN IEC 60352-5:2020
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in October of 2020.)
10/1/2020 - PDF - English - AENOR
Learn More€78.00 -
UNE-EN IEC 61076-2-012:2020
Connectors for electrical and electronic equipment - Product Requirements - Part 2-012: Circular connectors - Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 and IEC 61076-2-113 (Endorsed by Asociación Española de Normalización in October of 2020.)
10/1/2020 - PDF - English - AENOR
Learn More€104.00 -
UNE-EN IEC 60512-9-5:2020
Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN IEC 61076-8-100:2020
Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€87.00 -
UNE-EN IEC 61076-8-101:2020
Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€87.00 -
UNE-EN IEC 61076-8-102:2020
Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€87.00 -
UNE-EN IEC 63171-1:2020
Connectors for electrical and electronic equipment - Part 1: Detail specification for two-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 copper LC style (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€76.00 -
UNE-EN IEC 61076-3-124:2019/AC:2020-04
Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz (Endorsed by Asociación Española de Normalización in June of 2020.)
6/1/2020 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN IEC 60512-28-100:2019
Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g (Endorsed by Asociación Española de Normalización in February of 2020.)
2/1/2020 - PDF - English - AENOR
Learn More€88.00 -
UNE-EN IEC 61169-24:2019
Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 O cable networks (type F)
12/11/2019 - PDF - Spanish - AENOR
Learn More€73.00 -
UNE-EN IEC 61169-24:2019
Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 O cable networks (type F)
12/11/2019 - PDF - English - AENOR
Learn More€87.60 -
UNE-EN IEC 61076-3-123:2019
Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking (Endorsed by Asociación Española de Normalización in December of 2019.)
12/1/2019 - PDF - English - AENOR
Learn More€89.00 -
UNE-EN IEC 60512-99-002:2019
Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (Endorsed by Asociación Española de Normalización in June of 2019.)
6/1/2019 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN IEC 61076-3-124:2019
Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz (Endorsed by Asociación Española de Normalización in June of 2019.)
6/1/2019 - PDF - English - AENOR
Learn More€83.00 -
UNE-EN 61076-1:2006/A1:2019
Connectors for electronic equipment - Product requirements - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in April of 2019.)
4/1/2019 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN IEC 60512-1:2018
Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in January of 2019.)
1/1/2019 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN IEC 61076-2-111:2018
Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking (Endorsed by Asociación Española de Normalización in August of 2018.)
8/1/2018 - PDF - English - AENOR
Learn More€110.00 -
UNE-EN IEC 60512-15-2:2018
Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) (Endorsed by Asociación Española de Normalización in May of 2018.)
5/1/2018 - PDF - English - AENOR
Learn More€57.00 -
UNE-EN IEC 61076-3-119:2018
Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz (Endorsed by Asociación Española de Normalización in April of 2018.)
4/1/2018 - PDF - English - AENOR
Learn More€76.00 -
UNE-EN 61076-3-122:2017
Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments (Endorsed by Asociación Española de Normalización in November of 2017.)
11/1/2017 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 61076-3-104:2017
Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz (Endorsed by Asociación Española de Normalización in November of 2017.)
11/1/2017 - PDF - English - AENOR
Learn More€28.00 -
UNE-EN 60603-7-81:2016/AC:2017-07
Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz (Endorsed by Asociación Española de Normalización in September of 2017.)
9/1/2017 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN 61076-2-113:2017
Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz (Endorsed by Asociación Española de Normalización in July of 2017.)
7/1/2017 - PDF - English - AENOR
Learn More€75.00 -
UNE-EN 60603-7-82:2016
Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz (Endorsed by Asociación Española de Normalización in February of 2017.)
2/1/2017 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN 61076-3-120:2016
Connectors for electronic equipment - product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 v d.c. And rated current of 30 a (Endorsed by Asociación Española de Normalización in February of 2017.)
2/1/2017 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN 61076-3-110:2016
Connectors for electronic equipment - Product requirements - Part 3-110: detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 mhz (Endorsed by Asociación Española de Normalización in January of 2017.)
1/1/2017 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN 61076-4-116:2012/A1:2016
Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (Endorsed by AENOR in May of 2016.)
5/1/2016 - PDF - English - AENOR
Learn More€42.00 -
UNE-EN 60603-7-81:2016
Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz (Endorsed by AENOR in May of 2016.)
5/1/2016 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN 60512-29-100:2015
Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g (Endorsed by AENOR in November of 2015.)
11/1/2015 - PDF - English - AENOR
Learn More€90.00 -
UNE-EN 61076-2-104:2014
Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking (Endorsed by AENOR in December of 2014.)
12/1/2014 - PDF - English - AENOR
Learn More€75.00 -
UNE-EN 61076-2-109:2014
Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz (Endorsed by AENOR in October of 2014.)
10/1/2014 - PDF - English - AENOR
Learn More€71.00 -
UNE-EN 60352-2:2006/A1:2013
Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance (Endorsed by AENOR in October of 2013.)
10/1/2013 - PDF - English - AENOR
Learn More€24.00 -
UNE-EN 61169-26:2013
Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors (Endorsed by AENOR in June of 2013.)
6/1/2013 - PDF - English - AENOR
Learn More€70.00 -
UNE-EN 60512-24-1:2012
Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism (Endorsed by AENOR in January of 2013.)
1/1/2013 - PDF - English - AENOR
Learn More€24.00 -
UNE-EN 60512-99-001:2012
Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power (Endorsed by AENOR in December of 2012.)
12/1/2012 - PDF - English - AENOR
Learn More€57.00 -
UNE-EN 61076-2-101:2012
Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking (Endorsed by AENOR in October of 2012.)
10/1/2012 - PDF - English - AENOR
Learn More€96.00 -
UNE-EN 60512-1-100:2012
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
9/19/2012 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN 60512-1-100:2012
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
9/19/2012 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN 60838-2-2:2007/A1:2012
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules
9/19/2012 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60838-2-2:2007/A1:2012
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules
9/19/2012 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 61076-4-116:2012
Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (Endorsed by AENOR in August of 2012.)
8/1/2012 - PDF - English - AENOR
Learn More€78.00 -
UNE-EN 60512-9-2:2012
Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature (Endorsed by AENOR in April of 2012.)
4/1/2012 - PDF - English - AENOR
Learn More€35.00 -
UNE-EN 60512-27-100:2012
Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g (Endorsed by AENOR in April of 2012.)
4/1/2012 - PDF - English - AENOR
Learn More€100.00 -
UNE-EN 61076-2:2011
Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors (Endorsed by AENOR in November of 2011.)
11/1/2011 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN 61076-2-001:2011
Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification (Endorsed by AENOR in November of 2011.)
11/1/2011 - PDF - English - AENOR
Learn More€111.00 -
UNE-EN 61076-2-106:2011
Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 (Endorsed by AENOR in November of 2011.)
11/1/2011 - PDF - English - AENOR
Learn More€80.00 -
UNE-EN 60512-9-3:2011
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load (Endorsed by AENOR in October of 2011.)
10/1/2011 - PDF - English - AENOR
Learn More€42.00 -
UNE-EN 60512-26-100:2008/A1:2011
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (Endorsed by AENOR in September of 2011.)
9/1/2011 - PDF - English - AENOR
Learn More€16.00 -
UNE-EN 60603-7-1:2011
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors (Endorsed by AENOR in September of 2011.)
9/1/2011 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN 60130-9:2011
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment (Endorsed by AENOR in August of 2011.)
8/1/2011 - PDF - English - AENOR
Learn More€90.00 -
UNE-EN 61984:2009
Connectors - Safety requirements and tests (Endorsed by AENOR in April of 2011.)
4/1/2011 - PDF - English - AENOR
Learn More€81.00 -
UNE-EN 61076-3-115:2010
Connectors for electronic equipment - Product requirements -- Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type (Endorsed by AENOR in November of 2010.)
11/1/2010 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN 60603-7-7:2010
Connectors for electronic equipment -- Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz (Endorsed by AENOR in November of 2010.)
11/1/2010 - PDF - English - AENOR
Learn More€71.00 -
UNE-EN 60603-7-2:2010
Connectors for electronic equipment -- Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz (Endorsed by AENOR in October of 2010.)
10/1/2010 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN 60603-7-3:2010
Connectors for electronic equipment -- Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz (Endorsed by AENOR in October of 2010.)
10/1/2010 - PDF - English - AENOR
Learn More€59.00 -
UNE-EN 60603-7-5:2010
Connectors for electronic equipment -- Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHzMHz (Endorsed by AENOR in October of 2010.)
10/1/2010 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN 60603-7-4:2010
Connectors for electronic equipment -- Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz (Endorsed by AENOR in October of 2010.)
10/1/2010 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN 61076-3-118:2010
Connectors for electronic equipment - Product requirements -- Part 3-118: Rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling (Endorsed by AENOR in October of 2010.)
10/1/2010 - PDF - English - AENOR
Learn More€71.00 -
UNE-EN 60512-19-1:2010
Connectors for electronic equipment - Tests and measurements -- Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels (Endorsed by AENOR in September of 2010.)
9/1/2010 - PDF - English - AENOR
Learn More€24.00 -
UNE-EN 61076-2-107:2010
Connectors for electronic equipment - Product requirements -- Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking (Endorsed by AENOR in September of 2010.)
9/1/2010 - PDF - English - AENOR
Learn More€74.00 -
UNE-EN 60512-9-1:2010
Connectors for electronic equipment - Tests and measurements -- Part 9-1: Endurance tests - Test 9a: Mechanical operation (Endorsed by AENOR in August of 2010.)
8/1/2010 - PDF - English - AENOR
Learn More€24.00 -
UNE-EN 61076-3-114:2009
Connectors for electronic equipment - Product requirements -- Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type (Endorsed by AENOR in December of 2009.)
12/1/2009 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN 61076-3-117:2009
Connectors for electronic equipment - Product requirements -- Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push pull coupling (Endorsed by AENOR in December of 2009.)
12/1/2009 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN 61076-3-116:2008
Connectors for electronic equipment - Product requirements -- Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English - AENOR
Learn More€66.00 -
UNE-EN 60512-25-9:2008
Connectors for electronic equipment - Tests and measurements -- Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN 60512-26-100:2008
Connectors for electronic equipment - Tests and measurements -- Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (Endorsed by AENOR in February of 2009.)
2/1/2009 - PDF - English - AENOR
Learn More€92.00 -
UNE-EN 61076-3-001:2008
Connectors for electronic equipment - Product requirements -- Part 3-001: Rectangular connectors - Blank detail specification (Endorsed by AENOR in February of 2009.)
2/1/2009 - PDF - English - AENOR
Learn More€113.00 -
UNE-EN 61076-3:2008
Connectors for electronic equipment - Product requirements -- Part 3: Rectangular connectors - Sectional specification (Endorsed by AENOR in February of 2009.)
2/1/2009 - PDF - English - AENOR
Learn More€66.00 -
UNE-EN 61076-2-105:2008
Connectors for electronic equipment - Product requirements -- Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking (Endorsed by AENOR in January of 2009.)
1/1/2009 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 60512-15-1:2008
Connectors for electronic equipment - Tests and measurements -- Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert (Endorsed by AENOR in December of 2008.)
12/1/2008 - PDF - English - AENOR
Learn More€24.00 -
UNE-EN 60512-15-3:2008
Connectors for electronic equipment - Tests and measurements -- Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) (Endorsed by AENOR in December of 2008.)
12/1/2008 - PDF - English - AENOR
Learn More€28.00 -
UNE-EN 60512-15-4:2008
Connectors for electronic equipment - Tests and measurements -- Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force (Endorsed by AENOR in December of 2008.)
12/1/2008 - PDF - English - AENOR
Learn More€28.00 -
UNE-EN 60512-15-5:2008
Connectors for electronic equipment - Tests and measurements -- Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation (Endorsed by AENOR in December of 2008.)
12/1/2008 - PDF - English - AENOR
Learn More€35.00 -
UNE-EN 60512-15-6:2008
Connectors for electronic equipment - Tests and measurements -- Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices (Endorsed by AENOR in December of 2008.)
12/1/2008 - PDF - English - AENOR
Learn More€24.00 -
UNE-EN 60512-15-7:2008
Connectors for electronic equipment - Tests and measurements -- Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment (Endorsed by AENOR in December of 2008.)
12/1/2008 - PDF - English - AENOR
Learn More€24.00 -
UNE-EN 60352-2:2006
Solderless connections -- Part 2: Crimped connections - General requirements, test methods and practical guidance (Endorsed by AENOR in May of 2008.)
5/1/2008 - PDF - English - AENOR
Learn More€94.00 -
UNE-EN 61076-1:2006
Connectors for electronic equipment - Product requirements -- Part 1: Generic specification (Endorsed by AENOR in May of 2008.)
5/1/2008 - PDF - English - AENOR
Learn More€80.00 -
UNE-EN 62197-1:2006
Connectors for electronic equipment - Quality assessment requirements -- Part 1: Generic specification (Endorsed by AENOR in May of 2008.)
5/1/2008 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 61169-2:2007
Radio-frequency connectors -- Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 (IEC 61169-2:2007). (Endorsed by AENOR in July of 2007.)
7/1/2007 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN 60512-13-5:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method
5/9/2007 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 60512-13-5:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method
5/9/2007 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN 60512-12-3:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
4/25/2007 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 60512-12-3:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
4/25/2007 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN 60512-12-4:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method
4/25/2007 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 60512-12-4:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method
4/25/2007 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN 60512-12-5:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
4/25/2007 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 60512-12-5:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
4/25/2007 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN 61076-3-106:2006
Connectors for electronic equipment - Product requirements -- Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface (Endorsed by AENOR in April of 2007.)
4/1/2007 - PDF - English - AENOR
Learn More€87.00 -
UNE-EN 175301-801:2006
Detail Specification: High density rectangular connectors, round removable crimp contacts (Endorsed by AENOR in March of 2007.)
3/1/2007 - PDF - English - AENOR
Learn More€76.00 -
UNE-EN 60838-2-2:2007
Miscellaneous lampholders -- Part 2-2: Particular requirements - Connectors for LED-modules (IEC 60838-2-2:2006).
1/10/2007 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN 60838-2-2:2007
Miscellaneous lampholders -- Part 2-2: Particular requirements - Connectors for LED-modules (IEC 60838-2-2:2006).
1/10/2007 - PDF - English - AENOR
Learn More€63.60 -
UNE-EN 60512-12-3:2006
Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006).
12/13/2006 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 60512-12-3:2006
Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006).
12/13/2006 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN 60512-12-4:2006
Connectors for electronic equipment - Tests and measurements -- Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method (IEC 60512-12-4:2006).
12/13/2006 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN 60512-12-4:2006
Connectors for electronic equipment - Tests and measurements -- Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method (IEC 60512-12-4:2006).
12/13/2006 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN 60512-12-5:2006
Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method (IEC 60512-12-5:2006).
12/13/2006 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN 60512-12-5:2006
Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method (IEC 60512-12-5:2006).
12/13/2006 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN 175301-803:2006
Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable (Endorsed by AENOR in December of 2006.)
12/1/2006 - PDF - English - AENOR
Learn More€71.00 -
UNE-EN 61076-7-100:2006
Connectors for electronic equipment - Product requirements -- Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system (IEC 61076-7-100:2006). (Endorsed by AENOR in October of 2006.)
10/1/2006 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN 60512-13-5:2006
Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006).
9/13/2006 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN 60512-13-5:2006
Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006).
9/13/2006 - PDF - English - AENOR
Learn More€58.80 -
UNE-EN 61076-3-112:2006
Connectors for electronic equipment -- Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/video equipment (IEC 61076-3-112:2006) (Endorsed by AENOR in September of 2006.)
9/1/2006 - PDF - English - AENOR
Learn More€75.00 -
UNE-EN 60603-2:1998/A1:2005
Connectors for frequencies below 3 MHz for use with printed boards -- Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features (Endorsed by AENOR in June of 2006.)
6/1/2006 - PDF - English - AENOR
Learn More€62.00 -
UNE-EN 60512-25-7:2005
Connectors for electronic equipment - Tests and measurements -- Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
9/14/2005 - PDF - Spanish - AENOR
Learn More€78.00 -
UNE-EN 60512-25-7:2005
Connectors for electronic equipment - Tests and measurements -- Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
9/14/2005 - PDF - English - AENOR
Learn More€93.60 -
UNE-EN 175101-809:2004 CORR:2005
Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality (Endorsed by AENOR in September of 2005.)
9/1/2005 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN 60512-25-5:2005
Connectors for electronic equipment - Tests and measurements -- Part 25-5: Test 25e - Return loss
5/18/2005 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 60512-25-5:2005
Connectors for electronic equipment - Tests and measurements -- Part 25-5: Test 25e - Return loss
5/18/2005 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 60512-25-6:2005
Connectors for electronic equipment - Tests and measurements -- Part 25-6: Test 25f: Eye pattern and jitter
5/18/2005 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 60512-25-6:2005
Connectors for electronic equipment - Tests and measurements -- Part 25-6: Test 25f: Eye pattern and jitter
5/18/2005 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 61076-7-001:2004
Connectors for electronic equipment -- Part 7-001: Cable outlet accessories - Blank detail specification (Endorsed by AENOR in November of 2004.)
11/1/2004 - PDF - English - AENOR
Learn More€38.00 -
UNE-EN 61076-2-103:2004
Connectors for electronic equipment -- Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type 'XLR') (Endorsed by AENOR in August of 2004.)
8/1/2004 - PDF - English - AENOR
Learn More€75.00 -
UNE-EN 175101-809:2004
Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality (Endorsed by AENOR in July of 2004.)
7/1/2004 - PDF - English - AENOR
Learn More€76.00 -
UNE-EN 61076-3-103:2004
Connectors for electronic equipment -- Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) (Endorsed by AENOR in June of 2004.)
6/1/2004 - PDF - English - AENOR
Learn More€96.00 -
UNE-EN 61076-6:2004
Connectors for electronic equipment -- Part 6: Loose part contacts - Sectional specification (Endorsed by AENOR in June of 2004.)
6/1/2004 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN 60512-2-2:2004
Connectors for electronic equipment - Tests and measurements -- Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
4/30/2004 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60512-2-2:2004
Connectors for electronic equipment - Tests and measurements -- Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
4/30/2004 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 60512-2-5:2004
Connectors for electronic equipment - Tests and measurements -- Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance
4/30/2004 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN 60512-2-5:2004
Connectors for electronic equipment - Tests and measurements -- Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance
4/30/2004 - PDF - English - AENOR
Learn More€32.40 -
UNE-EN 60512-4-1:2004
Connectors for electronic equipment - Tests and measurements -- Part 4-1: Voltage stress tests - Test 4a: Voltage proof
4/30/2004 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN 60512-4-1:2004
Connectors for electronic equipment - Tests and measurements -- Part 4-1: Voltage stress tests - Test 4a: Voltage proof
4/30/2004 - PDF - English - AENOR
Learn More€32.40 -
UNE-EN 60512-10-4:2004
Connectors for electronic equipment - Tests and measurements -- Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors)
4/30/2004 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN 60512-10-4:2004
Connectors for electronic equipment - Tests and measurements -- Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors)
4/30/2004 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN 61076-4-115:2003
Connectors for electronic equipment -- Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment (Endorsed by AENOR in December of 2003.)
12/1/2003 - PDF - English - AENOR
Learn More€104.00 -
UNE-EN 61076-2-102:2003
Connectors for electronic equipment -- Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply
6/20/2003 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 61076-2-102:2003
Connectors for electronic equipment -- Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply
6/20/2003 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN 61076-4-113:2003
Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications (Endorsed by AENOR in June of 2003.)
6/1/2003 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 60512-25-2:2003
Connectors for electronic equipment - Tests and measurements -- Part 25-2: Test 25b: Attenuation (insertion loss).
5/30/2003 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 60512-25-2:2003
Connectors for electronic equipment - Tests and measurements -- Part 25-2: Test 25b: Attenuation (insertion loss).
5/30/2003 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 60512-11-6:2003
Connectors for electronic equipment - Tests and measurements -- Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist.
4/25/2003 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60512-11-6:2003
Connectors for electronic equipment - Tests and measurements -- Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist.
4/25/2003 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 60512-11-9:2003
Connectors for electronic equipment - Tests and measurements -- Part 11-9: Climatic tests - Test 11i: Dry heat.
4/25/2003 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 60512-11-9:2003
Connectors for electronic equipment - Tests and measurements -- Part 11-9: Climatic tests - Test 11i: Dry heat.
4/25/2003 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN 60512-11-10:2003
Connectors for electronic equipment - Tests and measurements -- Part 11-10: Climatic tests - Test 11j: Cold.
4/25/2003 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 60512-11-10:2003
Connectors for electronic equipment - Tests and measurements -- Part 11-10: Climatic tests - Test 11j: Cold.
4/25/2003 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN 60512-11-11:2003
Connectors for electronic equipment - Tests and measurements -- Part 11-11: Climatic tests - Test 11k: Low air pressure.
4/25/2003 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60512-11-11:2003
Connectors for electronic equipment - Tests and measurements -- Part 11-11: Climatic tests - Test 11k: Low air pressure.
4/25/2003 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 60512-11-12:2003
Connectors for electronic equipment - Tests and measurements -- Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic.
4/25/2003 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60512-11-12:2003
Connectors for electronic equipment - Tests and measurements -- Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic.
4/25/2003 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 60512-11-13:2003
Connectors for electronic equipment - Tests and measurement -- Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections.
4/25/2003 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60512-11-13:2003
Connectors for electronic equipment - Tests and measurement -- Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections.
4/25/2003 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 60512-1-1:2002
Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination.
12/16/2002 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN 60512-1-1:2002
Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination.
12/16/2002 - PDF - English - AENOR
Learn More€32.40 -
UNE-EN 60512-1-2:2002
Connectors for electronic equipment - Tests and measurements -- Part 1-2: General examination - Test 1b: Examination of dimension and mass.
12/16/2002 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN 60512-1-2:2002
Connectors for electronic equipment - Tests and measurements -- Part 1-2: General examination - Test 1b: Examination of dimension and mass.
12/16/2002 - PDF - English - AENOR
Learn More€32.40 -
UNE-EN 60512-2-1:2002
Connectors for electronic equipment - Tests and measurements -- Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method.
12/16/2002 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60512-2-1:2002
Connectors for electronic equipment - Tests and measurements -- Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method.
12/16/2002 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 60512-2-3:2002
Connectors for electronic equipment - Tests and measurements -- Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation.
12/16/2002 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60512-2-3:2002
Connectors for electronic equipment - Tests and measurements -- Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation.
12/16/2002 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 60512-2-6:2002
Connectors for electronic equipment - Tests and measurements -- Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity.
12/16/2002 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60512-2-6:2002
Connectors for electronic equipment - Tests and measurements -- Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity.
12/16/2002 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 60512-3-1:2002
Connectors for electronic equipment - Tests and measurements -- Part 3-1: Insulation tests - Test 3a: Insulation resistance.
12/16/2002 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN 60512-3-1:2002
Connectors for electronic equipment - Tests and measurements -- Part 3-1: Insulation tests - Test 3a: Insulation resistance.
12/16/2002 - PDF - English - AENOR
Learn More€32.40 -
UNE-EN 60512-4-2:2002
Connectors for electronic equipment - Tests and measurements -- Part 4-2: Voltage stress tests - Test 4b: Partial discharge.
12/16/2002 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN 60512-4-2:2002
Connectors for electronic equipment - Tests and measurements -- Part 4-2: Voltage stress tests - Test 4b: Partial discharge.
12/16/2002 - PDF - English - AENOR
Learn More€32.40 -
UNE-EN 60512-4-3:2002
Connectors for electronic equipment - Tests and measurements -- Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels.
12/16/2002 - PDF - Spanish - AENOR
Learn More€25.00 -
UNE-EN 60512-4-3:2002
Connectors for electronic equipment - Tests and measurements -- Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels.
12/16/2002 - PDF - English - AENOR
Learn More€30.00 -
UNE-EN 60512-5-1:2002
Connectors for electronic equipment - Tests and measurements -- Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise.
12/16/2002 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60512-5-1:2002
Connectors for electronic equipment - Tests and measurements -- Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise.
12/16/2002 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 60512-5-2:2002
Connectors for electronic equipment - Tests and measurements -- Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating.
12/16/2002 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN 60512-5-2:2002
Connectors for electronic equipment - Tests and measurements -- Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating.
12/16/2002 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN 60512-6-1:2002
Connectors for electronic equipment - Tests and measurements -- Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state.
12/16/2002 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 60512-6-1:2002
Connectors for electronic equipment - Tests and measurements -- Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state.
12/16/2002 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN 60512-6-2:2002
Connectors for electronic equipment - Tests and measurements -- Part 6-2: Dynamic stress tests - Test 6b: Bump.
12/16/2002 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 60512-6-2:2002
Connectors for electronic equipment - Tests and measurements -- Part 6-2: Dynamic stress tests - Test 6b: Bump.
12/16/2002 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN 60512-6-3:2002
Connectors for electronic equipment - Tests and measurements -- Part 6-3: Dynamic stress tests - Test 6c: Shock.
12/16/2002 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 60512-6-3:2002
Connectors for electronic equipment - Tests and measurements -- Part 6-3: Dynamic stress tests - Test 6c: Shock.
12/16/2002 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN 60512-6-4:2002
Connectors for electronic equipment - Tests and measurements -- Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal).
12/16/2002 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 60512-6-4:2002
Connectors for electronic equipment - Tests and measurements -- Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal).
12/16/2002 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN 60512-11-2:2002
Connectors for electronic equipment - Tests and measurements -- Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat.
12/16/2002 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60512-11-2:2002
Connectors for electronic equipment - Tests and measurements -- Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat.
12/16/2002 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 60512-11-3:2002
Connectors for electronic equipment - Tests and measurements -- Part 11-3: Climatic tests - Test 11c: Damp heat, steady state.
12/16/2002 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 60512-11-3:2002
Connectors for electronic equipment - Tests and measurements -- Part 11-3: Climatic tests - Test 11c: Damp heat, steady state.
12/16/2002 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN 60512-11-4:2002
Connectors for electronic equipment - Tests and measurements -- Part 11-4: Climatic tests - Test 11d: Rapid change of temperature.
12/16/2002 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60512-11-4:2002
Connectors for electronic equipment - Tests and measurements -- Part 11-4: Climatic tests - Test 11d: Rapid change of temperature.
12/16/2002 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 60512-11-5:2002
Connectors for electronic equipment - Tests and measurements -- Part 11-5: Climatic tests - Test 11e: Mould growth.
12/16/2002 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60512-11-5:2002
Connectors for electronic equipment - Tests and measurements -- Part 11-5: Climatic tests - Test 11e: Mould growth.
12/16/2002 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 61076-4-108:2002
Connectors for electronic equipment -- Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 (Endorsed by AENOR in November of 2002.)
11/1/2002 - PDF - English - AENOR
Learn More€107.00 -
UNE-EN 61076-4-110:2002
Connectors for electronic equipment -- Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function (Endorsed by AENOR in November of 2002.)
11/1/2002 - PDF - English - AENOR
Learn More€94.00 -
UNE-EN 60512-25-1:2002
Connectors for electronic equipment - Tests and measurements -- Part 25-1: Test 25a - Crosstalk ratio.
9/30/2002 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN 60512-25-1:2002
Connectors for electronic equipment - Tests and measurements -- Part 25-1: Test 25a - Crosstalk ratio.
9/30/2002 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN 60512-25-3:2002
Connectors for electronic equipment - Tests and measurement -- Part 25-3: Test 25c - Rise time degradation.
9/30/2002 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN 60512-25-3:2002
Connectors for electronic equipment - Tests and measurement -- Part 25-3: Test 25c - Rise time degradation.
9/30/2002 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN 60512-25-4:2002
Connectors for electronic equipment - Tests and measurements -- Part 25-4: Test 25d - Propagation delay.
9/30/2002 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN 60512-25-4:2002
Connectors for electronic equipment - Tests and measurements -- Part 25-4: Test 25d - Propagation delay.
9/30/2002 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN 61076-4-100:2001
Connectors for electronic equipment -- Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes (Endorsed by AENOR in May of 2002.)
5/1/2002 - PDF - English - AENOR
Learn More€106.00
