31.220.10 : Plug-and-socket devices. Connectors
-
JIS C 5402-15-1:2014
Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert
6/20/2014 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 5402-15-4:2014
Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical tests) - Test 15d: Contact insertion, release and extraction force
6/20/2014 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 5402-15-6:2014
Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical tests) - Test 15f: Effectiveness of connector coupling devices
6/20/2014 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 5402-16-3:2014
Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
6/20/2014 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 5402-1-100:2014
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
6/20/2014 - PDF - Japanese - JSA
Learn More€25.00 -
NF EN 175201-804, C83-201-804 (06/2014)
Détail specification : circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling
6/1/2014 - Paper - French - AFNOR
Learn More€141.33 -
IEC 61076-2-109:2014
IEC 61076-2-109:2014 Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 x 1 screw-locking, for data transmission frequencies up to 500 MHz
5/8/2014 - PDF - English, French - IEC
Learn More€219.00 -
€66.00
-
BS EN 61076-3:2008
Connectors for electronic equipment. Product requirements Rectangular connectors. Sectional specification
4/30/2014 - PDF - English - BSI
Learn More€250.00 -
DIN EN 60352-2:2014-04
Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance (IEC 60352-2:2006 + A1:2013), German version EN 60352-2:2006 + A1:2013.
4/1/2014 - PDF - German - DIN
Learn More€148.04 -
JIS C 5402-15-2:2014
Connectors for electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)
2/20/2014 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 5402-15-3:2014
Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)
2/20/2014 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 5402-15-5:2014
Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation
2/20/2014 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 5402-16-1:2014
Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage
2/20/2014 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 5402-16-6:2014
Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations
2/20/2014 - PDF - Japanese - JSA
Learn More€25.00 -
NF EN 60352-2/A1, C93-023-2/A1 (02/2014)
Solderless connections - Part 2 : crimped connections - General requirements, test methods and practical guidance
2/1/2014 - Paper - French - AFNOR
Learn More€54.67 -
VG 96513-2:2013-11
Electrical connectors and plug-and-socket devices - Modular rectangular connector - Part 2: Mounting instructions, detail standard, Text in German and English
11/1/2013 - PDF - English, German - DIN
Learn More€59.63 -
VG 96513-3:2013-11
Electrical connectors and plug-and-socket devices - Modular rectangular connector - Part 3: Mating dimensions, detail standard, Text in German and English
11/1/2013 - PDF - English, German - DIN
Learn More€45.98 -
VG 96513-4:2013-11
Electrical connectors and plug-and-socket devices - Modular rectangular connector - Part 4: Dimensions, mass, detail standard, Text in German and English
11/1/2013 - PDF - English, German - DIN
Learn More€65.89 -
VG 95319-1:2013-11
Electrical connectors and plug-and-socket devices - Part 1: Summary, Text in German and English
11/1/2013 - PDF - English, German - DIN
Learn More€141.96 -
DIN EN 61169-26 VDE 0887-969-26:2013-10
Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors (IEC 61169-26:2013), German version EN 61169-26:2013
10/1/2013 - Paper - German - VDE
Learn More€74.10 -
UNE-EN 60352-2:2006/A1:2013
Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance (Endorsed by AENOR in October of 2013.)
10/1/2013 - PDF - English - AENOR
Learn More€24.00 -
BS EN 60352-2:2006+A1:2013
Solderless connections Crimped connections. General requirements, test methods and practical guidance
9/30/2013 - PDF - English - BSI
Learn More€348.00 -
DIN EN 60512-28-100 VDE 0687-512-28-100:2013-09
Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g (IEC 60512-28-100:2013), German version EN 60512-28-100:2013
9/1/2013 - Paper - German - VDE
Learn More€91.70 -
DIN EN 60603-13 Berichtigung 1:2013-09
Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) (IEC 60603-13:1995), German version EN 60603-13:1998, Corrigendum to DIN EN 60603-13:1998-09
9/1/2013 - PDF - German - DIN
Learn More€0.00 -
BS EN 61169-26:2013
Radio-frequency connectors Sectional specification for TNCA series RF coaxial
7/31/2013 - PDF - English - BSI
Learn More€250.00 -
IEC 60352-2:2006+AMD1:2013 Edition 2.1
IEC 60352-2:2006+AMD1:2013 (Consolidated version) Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance
6/27/2013 - PDF - English, French - IEC
Learn More€443.00 -
IEC 60352-2:2006/AMD1:2013
IEC 60352-2:2006/AMD1:2013 Amendment 1 - Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance
6/27/2013 - PDF - English, French - IEC
Learn More€12.00 -
UNE-EN 61169-26:2013
Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors (Endorsed by AENOR in June of 2013.)
6/1/2013 - PDF - English - AENOR
Learn More€70.00 -
DIN EN 60512-24-1 VDE 0687-512-24-1:2013-05
Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism (IEC 60512-24-1:2010), German version EN 60512-24-1:2012
5/1/2013 - Paper - German - VDE
Learn More€22.72 -
DIN EN 60512-99-001 VDE 0687-512-99-001:2013-05
Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power (IEC 60512-99-001:2012), German version EN 60512-99-001:2012
5/1/2013 - Paper - German - VDE
Learn More€49.48 -
DIN EN 61076-2-112 VDE 0687-76-2-112:2013-04
Connectors for electronic equipment - Product requirements - Part 2-112: Circular connectors - Detail specification for M12 power connectors up to12 Amps with screw-locking (IEC 48B/2333/CD:2013)
4/1/2013 - Paper - German - VDE
Learn More€42.45 -
NF EN 60512-99-001, C93-400-99-001 (02/2013)
Connectors for electronic equipment - Test and measurements - Part 99-001 : test schedule for engaging and separating connectors under electrical load - Test 99a : connectors used in twisted pair communication cabling with remote power
2/1/2013 - Paper - French - AFNOR
Learn More€88.33 -
NF EN 61076-2-101, C93-406-2-101 (02/2013)
Connectors for electronic equipment - Product requirements - Part 2-101 : circular connectors - Detail specification for M12 connectors with screw-locking - Connecteurs pour équipements électroniques
2/1/2013 - Paper - French - AFNOR
Learn More€170.00 -
13/30268325 DC:2013
BS EN 61076-2-112. Connectors for electronic equipment. Part 2-112. Product requirements. Circular connectors. Detail specification for M12 power connectors up to 12 Amps with screw-locking
1/30/2013 - PDF - English - BSI
Learn More€24.00 -
IEC 61169-26:2013
IEC 61169-26:2013 Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors
1/29/2013 - PDF - English, French - IEC
Learn More€219.00 -
DIN EN 61076-2-101 VDE 0687-76-2-101:2013-01
Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking (IEC 61076-2-101:2012), German version EN 61076-2-101:2012
1/1/2013 - Paper - German - VDE
Learn More€126.54 -
NF EN 60838-2-2/A1, C61-530-2-2/A1 (01/2013)
Miscellaneous lampholders - Part 2-2 : particular requirements - Connectors for LED-modules
1/1/2013 - Paper - French - AFNOR
Learn More€54.50 -
UNE-EN 60512-24-1:2012
Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism (Endorsed by AENOR in January of 2013.)
1/1/2013 - PDF - English - AENOR
Learn More€24.00 -
BS EN 60838-2-2:2006+A1:2012
Miscellaneous lampholders Particular requirements. Connectors for LED-modules
12/31/2012 - PDF - English - BSI
Learn More€151.00 -
VG 95319-2:2012-12
Electrical connectors and plug-and-socket devices - Part 2: Generic specification, Text in German and English
12/1/2012 - PDF - English, German - DIN
Learn More€163.74 -
NF EN 60603-7-1, C93-430-7-1 (12/2012)
Connectors for electronic equipment - Part 7-1 : detail specification for 8-way, shielded, free and fixed connectors
12/1/2012 - Paper - French - AFNOR
Learn More€103.33 -
UNE-EN 60512-99-001:2012
Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power (Endorsed by AENOR in December of 2012.)
12/1/2012 - PDF - English - AENOR
Learn More€57.00 -
BS EN 60512-99-001:2012
Connectors for electronic equipment. Tests and measurements Test schedule engaging separating connectors under electrical load. 99a: used in twisted pair communication cabling with remote power
11/30/2012 - PDF - English - BSI
Learn More€180.00 -
DIN EN 60512-16-21 VDE 0687-512-16-21:2012-11
Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses (IEC 60512-16-21:2012), German version EN 60512-16-21:2012
11/1/2012 - Paper - German - VDE
Learn More€45.89 -
NF EN 60512-16-21, C93-400-16-21 (11/2012)
Connectors for electronic equipment - Tests and measurements - Part 16-21 : mechanical tests on contacts and terminations - Test 16u : whisker test via the application of external mechanical stresses - Connecteurs pour équipements électroniques
11/1/2012 - Paper - French - AFNOR
Learn More€88.00 -
NF EN 61076-4-116, C93-406-4-116 (11/2012)
Connectors for electronic equipment - Product requirements - Part 4-116 : printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function - Connecteurs pour équipements électroniques
11/1/2012 - Paper - French - AFNOR
Learn More€141.33 -
DIN EN 60512-1-100 VDE 0687-512-1-100:2012-10
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications (IEC 60512-1-100:2012), German version EN 60512-1-100:2012
10/1/2012 - Paper - German - VDE
Learn More€45.89 -
DIN EN 60512-1-101 VDE 0687-512-1-101:2012-10
Connectors for electronic equipment - Tests and measurements - Part 1-101: Blank detail specification (IEC 48B/2311/CD:2012)
10/1/2012 - Paper - German - VDE
Learn More€18.19 -
EIA-965:2012
Specification for Mini Multilane 12 Gbs 12X Shielded Connector
10/1/2012 - PDF sécurisé - English - EIA
Learn More€112.35 -
UNE-EN 61076-2-101:2012
Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking (Endorsed by AENOR in October of 2012.)
10/1/2012 - PDF - English - AENOR
Learn More€96.00 -
UNE-EN 60512-1-100:2012
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
9/19/2012 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN 60512-1-100:2012
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
9/19/2012 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN 60838-2-2:2007/A1:2012
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules
9/19/2012 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60838-2-2:2007/A1:2012
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules
9/19/2012 - PDF - English - AENOR
Learn More€40.80 -
DIN EN 60512-7-2 VDE 0687-512-7-2:2012-09
Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact (IEC 60512-7-2:2011), German version EN 60512-7-2:2012
9/1/2012 - Paper - German - VDE
Learn More€42.45 -
DIN EN 60512-9-2 VDE 0687-512-9-2:2012-09
Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature (IEC 60512-9-2:2011), German version EN 60512-9-2:2012
9/1/2012 - Paper - German - VDE
Learn More€38.31 -
DIN EN 60512-27-100 VDE 0687-512-27-100:2012-09
Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g (IEC 60512-27-100:2011), German version EN 60512-27-100:2012
9/1/2012 - Paper - German - VDE
Learn More€141.05 -
NF EN 60512-1-100, C93-400-1-100 (09/2012)
Connectors for electronic equipment - Tests and measurements - Part 1-100 : general - Applicable publications - Connecteurs pour équipements électroniques
9/1/2012 - Paper - French - AFNOR
Learn More€69.50 -
NF EN 60512-27-100, C93-400-27-100 (09/2012)
Connectors for electronic equipment - Tests and measurements - Part 27-100 : signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g - Connecteurs pour équipements électriques
9/1/2012 - Paper - French - AFNOR
Learn More€183.00 -
BS EN 61076-2-101:2012
Connectors for electronic equipment. Product requirements Circular connectors. Detail specification M12 connectors with screw-locking
8/31/2012 - PDF - English - BSI
Learn More€348.00 -
IEC 60512-99-001:2012
IEC 60512-99-001:2012 Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power
8/13/2012 - PDF - English, French - IEC
Learn More€46.00 -
DIN EN 60603-7 VDE 0627-603-7:2012-08
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (IEC 60603-7:2008 + A1:2011), German version EN 60603-7:2009 + A1:2011
8/1/2012 - Paper - German - VDE
Learn More€116.31 -
NF EN 61076-2-001, C93-406-2-001 (08/2012)
Connectors for electronic equipment - Product requirements - Part 2-001 : circular connectors - Blank detail specification - Connecteurs pour équipements électroniques
8/1/2012 - Paper - French - AFNOR
Learn More€171.13 -
NF EN 61754-20-100, C93-910-20-100 (08/2012)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces de connecteurs pour fibres optiques - Partie 20-100 : norme d'interface pour les connecteurs de type LC avec boitiers de protection liés à la norme IEC 61076-3-106
8/1/2012 - Paper - French - AFNOR
Learn More€88.33 -
UNE-EN 61076-4-116:2012
Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (Endorsed by AENOR in August of 2012.)
8/1/2012 - PDF - English - AENOR
Learn More€78.00 -
BS EN 60512-16-21:2012
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16u. Whisker test via the application of external mechanical stresses
7/31/2012 - PDF - English - BSI
Learn More€180.00 -
DIN EN 61076-3-101 Berichtigung 1:2012-07
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line (IEC 61076-3-101:1997), German version EN 61076-3-101:1997, Corrigendum to DIN EN 61076-3-101:1998-05, (IEC-Cor. :2010 to IEC 61076-3-101:1997)
7/1/2012 - PDF - German - DIN
Learn More€0.00 -
JIS C 5402-13-2:2012 (R2017)
Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces
6/20/2012 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 5402-16-2:2012 (R2017)
Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry
6/20/2012 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 5402-16-4:2012 (R2017)
Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d:Tensile strength (crimped connections)
6/20/2012 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 5402-16-5:2012 (R2017)
Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
6/20/2012 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 5402-16-7:2012 (R2017)
Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
6/20/2012 - PDF - Japanese - JSA
Learn More€25.00 -
BS EN 60512-1-100:2012
Connectors for electronic equipment. Tests and measurements General. Applicable publications
5/31/2012 - PDF - English - BSI
Learn More€151.00 -
IEC 60512-16-21:2012
IEC 60512-16-21:2012 Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses
5/7/2012 - PDF - English, French - IEC
Learn More€46.00 -
NF EN 60603-7-7, C93-430-7-7 (05/2012)
Connectors for electronic equipment - Part 7-7 : detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz
5/1/2012 - Paper - French - AFNOR
Learn More€116.33 -
IEC 60838-2-2:2006+AMD1:2012 Edition 1.1
IEC 60838-2-2:2006+AMD1:2012 (Consolidated version) Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules
4/27/2012 - PDF - English, French - IEC
Learn More€75.00 -
IEC 61076-2-101:2012
IEC 61076-2-101:2012 Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
4/20/2012 - PDF - English, French - IEC
Learn More€345.00 -
IEC 61076-4-116:2012
IEC 61076-4-116:2012 Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
4/19/2012 - PDF - English, French - IEC
Learn More€311.00 -
DIN EN 60512-9-3 VDE 0687-512-9-3:2012-04
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load (IEC 60512-9-3:2011), German version EN 60512-9-3:2011
4/1/2012 - Paper - German - VDE
Learn More€42.45 -
DIN EN 61076-2 VDE 0687-76-2:2012-04
Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors (IEC 61076-2:2011), German version EN 61076-2:2011
4/1/2012 - Paper - German - VDE
Learn More€65.60 -
DIN EN 61076-2-001 VDE 0687-76-2-001:2012-04
Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification (IEC 61076-2-001:2011), German version EN 61076-2-001:2011
4/1/2012 - Paper - German - VDE
Learn More€145.82 -
DIN EN 61076-2-106 VDE 0687-76-2-106:2012-04
Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M16 × 0,75 with screw-locking and degree of protection IP40 or IP65/67 (IEC 61076-2-106:2011), German version EN 61076-2-106:2011
4/1/2012 - Paper - German - VDE
Learn More€110.67 -
UNE-EN 60512-9-2:2012
Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature (Endorsed by AENOR in April of 2012.)
4/1/2012 - PDF - English - AENOR
Learn More€35.00 -
UNE-EN 60512-27-100:2012
Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g (Endorsed by AENOR in April of 2012.)
4/1/2012 - PDF - English - AENOR
Learn More€100.00 -
BS EN 60512-27-100:2012
Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors. 27a 27g
3/31/2012 - PDF - English - BSI
Learn More€348.00 -
IEC 60838-2-2:2006/AMD1:2012
IEC 60838-2-2:2006/AMD1:2012 Amendment 1 - Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules
3/27/2012 - PDF - English, French - IEC
Learn More€12.00 -
NF EN 60512-8-2, C93-400-8-2 (03/2012)
Connectors for electronic equipment - Tests and measurements - Part 8-2 : static load tests (fixed connectors) - Test 8b : static load, axial - Connecteurs pour équipements électroniques
3/1/2012 - Paper - French - AFNOR
Learn More€72.00 -
NF EN 60512-9-4, C93-400-9-4 (03/2012)
Connectors for electronic equipment - Tests and measurements - Part 9-4 : endurance tests - Test 9d : durability of contact retention system and seals (maintenance, ageing) - Connecteurs pour équipements électroniques
3/1/2012 - Paper - French - AFNOR
Learn More€54.50 -
BS EN 60512-7-2:2012
Connectors for electronic equipment. Tests and measurements Impact tests (free connectors). Test 7b. Mechanical strength impact
2/29/2012 - PDF - English - BSI
Learn More€151.00 -
€348.00
-
IEC 60512-1-100:2012
IEC 60512-1-100:2012 Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
2/22/2012 - PDF - English, French - IEC
Learn More€46.00 -
DIN EN 60512-8-2 VDE 0687-512-8-2:2012-02
Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial (IEC 60512-8-2:2011), German version EN 60512-8-2:2011
2/1/2012 - Paper - German - VDE
Learn More€38.31 -
DIN EN 60512-17-2 VDE 0687-512-17-2:2012-02
Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation (IEC 60512-17-2:2011), German version EN 60512-17-2:2011
2/1/2012 - Paper - German - VDE
Learn More€38.31 -
DIN EN 60512-9-4 VDE 0687-512-9-4:2012-02
Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing) (IEC 60512-9-4:2011), German version EN 60512-9-4:2011
2/1/2012 - Paper - German - VDE
Learn More€38.31 -
NF EN 60130-9, C93-407-9 (02/2012)
Connectors for frequencies below 3 MHz - Part 9 : circular connectors for radio and associated sound equipment
2/1/2012 - Paper - French - AFNOR
Learn More€153.67 -
DIN EN 60603-7-1 VDE 0687-603-7-1:2012-01
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors (IEC 60603-7-1:2011), German version EN 60603-7-1:2011
1/1/2012 - Paper - German - VDE
Learn More€77.84 -
€30.00
-
€60.00
-
IEC 60512-27-100:2011
IEC 60512-27-100:2011 Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on 60603-7 series connectors - Tests 27a to 27g
12/7/2011 - PDF - English, French - IEC
Learn More€397.00 -
DIN EN 60352-8:2011-12
Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance (IEC 60352-8:2011), German version EN 60352-8:2011
12/1/2011 - PDF - German - DIN
Learn More€99.35 -
DIN EN 60130-9:2011-12
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment (IEC 60130-9:2011), German version EN 60130-9:2011.
12/1/2011 - PDF - German - DIN
Learn More€152.71 -
DIN EN 60512-26-100 VDE 0687-512-26-100:2011-12
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (IEC 60512-26-100:2008 + A1:2011), German version EN 60512-26-100:2008 + A1:2011
12/1/2011 - Paper - German - VDE
Learn More€126.54 -
IEC 60512-7-2:2011
IEC 60512-7-2:2011 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free components) - Test 7b: Mechanical strength impact
11/17/2011 - PDF - English, French - IEC
Learn More€23.00 -
VG 95351-5:2011-11
Electrical connectors and plug-and-socket devices - Connectors with bayonet coupling, butting contact, 7pole - Part 5: Dimensions, mass, detail specification, Text in German and English
11/1/2011 - PDF - English, German - DIN
Learn More€59.63 -
NF EN 60512-26-100/A1, C93-400-26-100/A1 (11/2011)
Connectors for electronic equipment - Tests and measurements - Part 26-100 : measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g - Connecteurs pour équipements électroniques
11/1/2011 - Paper - French - AFNOR
Learn More€51.32 -
UNE-EN 61076-2:2011
Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors (Endorsed by AENOR in November of 2011.)
11/1/2011 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN 61076-2-001:2011
Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification (Endorsed by AENOR in November of 2011.)
11/1/2011 - PDF - English - AENOR
Learn More€111.00 -
UNE-EN 61076-2-106:2011
Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 (Endorsed by AENOR in November of 2011.)
11/1/2011 - PDF - English - AENOR
Learn More€80.00 -
UNE-EN 60512-9-3:2011
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load (Endorsed by AENOR in October of 2011.)
10/1/2011 - PDF - English - AENOR
Learn More€42.00 -
BS EN 61076-2-106:2011
Connectors for electronic equipment. Product requirements Circular connectors. Detail specification connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67
9/30/2011 - PDF - English - BSI
Learn More€331.00 -
NF EN 60352-8, C93-028 (09/2011)
Solderless connections - Part 8 : compression mount connections - General requirements, test methods and practical guidance
9/1/2011 - Paper - French - AFNOR
Learn More€103.33 -
UNE-EN 60512-26-100:2008/A1:2011
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (Endorsed by AENOR in September of 2011.)
9/1/2011 - PDF - English - AENOR
Learn More€16.00 -
UNE-EN 60603-7-1:2011
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors (Endorsed by AENOR in September of 2011.)
9/1/2011 - PDF - English - AENOR
Learn More€69.00 -
BS EN 60512-9-3:2011
Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load
8/31/2011 - PDF - English - BSI
Learn More€151.00 -
BS EN 61076-2:2011
Connectors for electronic equipment. Product requirements Sectional specification circular connectors
8/31/2011 - PDF - English - BSI
Learn More€180.00 -
BS EN 61076-2-001:2011
Connectors for electronic equipment. Product requirements Circular connectors. Blank detail specification
8/31/2011 - PDF - English - BSI
Learn More€377.00 -
NF EN 60512-7-1, C93-400-7-1 (08/2011)
Connectors for electronic equipment - Tests and measurements - Part 7-1 : impact tests (free connectors) - Test 7a : free fall (repeated) - Connecteurs pour équipements électroniques
8/1/2011 - Paper - French - AFNOR
Learn More€72.00 -
UNE-EN 60130-9:2011
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment (Endorsed by AENOR in August of 2011.)
8/1/2011 - PDF - English - AENOR
Learn More€90.00 -
BS EN 60603-7-1:2011
Connectors for electronic equipment Detail specification 8-way, shielded, free and fixed connectors
7/31/2011 - PDF - English - BSI
Learn More€250.00 -
BS EN 60512-26-100:2008+A1:2011
Connectors for electronic equipment. Tests and measurements Measurement setup, test reference arrangements connectors according to IEC 60603-7 26a 26g
6/30/2011 - PDF - English - BSI
Learn More€348.00 -
IEC 61076-2-001:2011
IEC 61076-2-001:2011 Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification
6/21/2011 - PDF - English, French - IEC
Learn More€397.00 -
IEC 61076-2-106:2011
IEC 61076-2-106:2011 Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67
6/21/2011 - PDF - English, French - IEC
Learn More€311.00 -
IEC 61076-2:2011
IEC 61076-2:2011 Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors
6/21/2011 - PDF - English, French - IEC
Learn More€132.00 -
DIN EN 60512-8-1 VDE 0687-512-8-1:2011-06
Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse (IEC 60512-8-1:2010), German version EN 60512-8-1:2010
6/1/2011 - Paper - German - VDE
Learn More€38.31 -
DIN EN 60512-17-4 VDE 0687-512-17-4:2011-06
Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion (IEC 60512-17-4:2010), German version EN 60512-17-4:2010
6/1/2011 - Paper - German - VDE
Learn More€38.31 -
DIN EN 60512-17-1 VDE 0687-512-17-1:2011-06
Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness (IEC 60512-17-1:2010), German version EN 60512-17-1:2010
6/1/2011 - Paper - German - VDE
Learn More€38.31 -
DIN EN 60512-17-3 VDE 0687-512-17-3:2011-06
Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile) (IEC 60512-17-3:2010), German version EN 60512-17-3:2010
6/1/2011 - Paper - German - VDE
Learn More€38.31 -
DIN EN 60512-23-2 VDE 0687-512-23-2:2011-06
Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters (IEC 60512-23-2:2010), German version EN 60512-23-2:2010
6/1/2011 - Paper - German - VDE
Learn More€29.12 -
DIN EN 60603-7-7 VDE 0687-603-7-7:2011-06
Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz (IEC 60603-7-7:2010), German version EN 60603-7-7:2010
6/1/2011 - Paper - German - VDE
Learn More€84.90 -
DIN EN 61076-3-115 VDE 0687-76-3-115:2011-06
Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type (IEC 61076-3-115:2009), German version EN 61076-3-115:2010
6/1/2011 - Paper - German - VDE
Learn More€77.84 -
DIN EN 60603-7-71 VDE 0687-603-7-71:2011-06
Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1000 MHz (IEC 60603-7-71:2010), German version EN 60603-7-71:2010
6/1/2011 - Paper - German - VDE
Learn More€61.54 -
BS EN 60352-8:2011
Solderless connections Compression mount connections. General requirements, test methods and practical guidance
5/31/2011 - PDF - English - BSI
Learn More€250.00 -
BS EN 60130-9:2011
Connectors for frequencies below 3 MHz Circular connectors radio and associated sound equipment
5/31/2011 - PDF - English - BSI
Learn More€348.00 -
IEC 60512-26-100:2008+AMD1:2011 Edition 1.1
IEC 60512-26-100:2008+AMD1:2011 (Consolidated version) Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
5/25/2011 - PDF - English, French - IEC
Learn More€443.00 -
NF EN 60512-17-4, C93-400-17-4 (05/2011)
Connectors for electronic equipment - Tests and measurements - Part 17-4 : cable clamping tests - Test 17d : cable clamp resistance to cable torsion - Connecteurs pour équipements électroniques
5/1/2011 - Paper - French - AFNOR
Learn More€54.50 -
NF EN 60512-23-2, C93-400-23-2 (05/2011)
Connectors for electronic equipment - Tests and measurements - Part 23-2 : screening and filtering tests - Test 23b : suppression characteristics of integral filters - Connecteurs pour équipements électroniques
5/1/2011 - Paper - French - AFNOR
Learn More€54.50 -
NF EN 60512-8-1, C93-400-8-1 (05/2011)
Connectors for electronic equipment - Tests and measurements - Part 8-1 : static load tests (fixed connectors) - Test 8a : static load, transverse - Connecteurs pour équipements électroniques
5/1/2011 - Paper - French - AFNOR
Learn More€54.50 -
IEC 60603-7-1:2011
IEC 60603-7-1:2011 Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors
4/7/2011 - PDF - English, French - IEC
Learn More€173.00 -
NF EN 60603-7-71, C93-430-7-71 (04/2011)
Connectors for electronic equipment - Part 7-71 : detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz
4/1/2011 - Paper - French - AFNOR
Learn More€85.33 -
UNE-EN 61984:2009
Connectors - Safety requirements and tests (Endorsed by AENOR in April of 2011.)
4/1/2011 - PDF - English - AENOR
Learn More€81.00 -
IEC 60512-26-100:2008/AMD1:2011
IEC 60512-26-100:2008/AMD1:2011 Amendment 1 - Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
3/14/2011 - PDF - English, French - IEC
Learn More€12.00 -
DIN EN 60603-7-2 VDE 0687-603-7-2:2011-03
Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz (IEC 60603-7-2:2010), German version EN 60603-7-2:2010
3/1/2011 - Paper - German - VDE
Learn More€69.60 -
DIN EN 60603-7-3 VDE 0687-603-7-3:2011-03
Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz (IEC 60603-7-3:2010), German version EN 60603-7-3:2010
3/1/2011 - Paper - German - VDE
Learn More€53.63 -
DIN EN 60603-7-4 VDE 0687-603-7-4:2011-03
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz (IEC 60603-7-4:2010), German version EN 60603-7-4:2010
3/1/2011 - Paper - German - VDE
Learn More€53.63 -
DIN EN 60603-7-5 VDE 0687-603-7-5:2011-03
Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 250 MHz (IEC 60603-7-5:2010), German version EN 60603-7-5:2010
3/1/2011 - Paper - German - VDE
Learn More€53.63 -
NF EN 60512-22-1, C93-400-22-1 (03/2011)
Connectors for electronic equipment - Tests and measurements - Part 22-1 : capacitance tests - Test 22a : capacitance - Connecteurs pour équipements électroniques
3/1/2011 - Paper - French - AFNOR
Learn More€54.50 -
NF EN 60512-21-1, C93-400-21-1 (03/2011)
Connectors for electronic equipment - Tests and measurements - Part 21-1 : R.F. resistance tests - Test 21a : R.F. shunt resistance - Connecteurs pour équipements électroniques
3/1/2011 - Paper - French - AFNOR
Learn More€40.50 -
IEC 60130-9:2011
IEC 60130-9:2011 Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
2/23/2011 - PDF - English, French - IEC
Learn More€345.00 -
IEC 60352-8:2011
IEC 60352-8:2011 Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance
2/10/2011 - PDF - English, French - IEC
Learn More€173.00 -
DIN EN 61076-2-107 VDE 0687-76-2-107:2011-02
Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking (IEC 61076-2-107:2010), German version EN 61076-2-107:2010
2/1/2011 - Paper - German - VDE
Learn More€104.79 -
DIN EN 61076-3-118 VDE 0687-76-3-118:2011-02
Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling (IEC 61076-3-118:2010), German version EN 61076-3-118:2010
2/1/2011 - Paper - German - VDE
Learn More€84.90 -
DIN EN 60603-7-41 VDE 0687-603-7-41:2011-01
Connectors for electronic equipment - Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz (IEC 60603-7-41:2010), German version EN 60603-7-41:2010
1/1/2011 - Paper - German - VDE
Learn More€53.63 -
DIN EN 60603-7-51 VDE 0687-603-7-51:2011-01
Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz (IEC 60603-7-51:2010), German version EN 60603-7-51:2010
1/1/2011 - Paper - German - VDE
Learn More€57.53 -
NF EN 61076-3-118, C93-406-3-118 (01/2011)
Connectors for electronic equipment - Product requirements - Part 3-118 : rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling - Connecteurs pour équipements électroniques
1/1/2011 - Paper - French - AFNOR
Learn More€116.50 -
DIN EN 60512-9-5 VDE 0687-512-9-5:2010-12
Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic (IEC 60512-9-5:2010), German version EN 60512-9-5:2010
12/1/2010 - Paper - German - VDE
Learn More€38.31 -
DIN EN 60512-19-1 VDE 0687-512-19-1:2010-12
Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels (IEC 60512-19-1:2010), German version EN 60512-19-1:2010
12/1/2010 - Paper - German - VDE
Learn More€38.31 -
DIN EN 60512-20-1 VDE 0687-512-20-1:2010-12
Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame (IEC 60512-20-1:2010), German version EN 60512-20-1:2010
12/1/2010 - Paper - German - VDE
Learn More€38.31 -
DIN EN 60512-9-1 VDE 0687-512-9-1:2010-12
Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation (IEC 60512-9-1:2010), German version EN 60512-9-1:2010
12/1/2010 - Paper - German - VDE
Learn More€38.31 -
DIN EN 60512-20-3 VDE 0687-512-20-3:2010-12
Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire (IEC 60512-20-3:2010), German version EN 60512-20-3:2010
12/1/2010 - Paper - German - VDE
Learn More€38.31 -
DIN EN 60512-21-1 VDE 0687-512-21-1:2010-12
Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance (IEC 60512-21-1:2010), German version EN 60512-21-1:2010
12/1/2010 - Paper - German - VDE
Learn More€22.72 -
DIN EN 60512-22-1 VDE 0687-512-22-1:2010-12
Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance (IEC 60512-22-1:2010), German version EN 60512-22-1:2010
12/1/2010 - Paper - German - VDE
Learn More€29.12 -
DIN EN 60512-7-1 VDE 0687-512-7-1:2010-12
Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated) (IEC 60512-7-1:2010), German version EN 60512-7-1:2010
12/1/2010 - Paper - German - VDE
Learn More€38.31 -
NF EN 60603-7-3, C93-430-7-3 (12/2010)
Connectors for electronic equipment - Part 7-3 : detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz
12/1/2010 - Paper - French - AFNOR
Learn More€88.33 -
NF EN 60603-7-4, C93-430-7-4 (12/2010)
Connectors for electronic equipment - Part 7-4 : detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
12/1/2010 - Paper - French - AFNOR
Learn More€88.33 -
BS EN 60603-7-71:2010
Connectors for electronic equipment Detail specification 8-way, shielded, free and fixed connectors, data transmission with frequencies up to 1000 MHz
11/30/2010 - PDF - English - BSI
Learn More€180.00 -
BS EN 60512-8-1:2010
Connectors for electronic equipment. Tests and measurements Static load tests (fixed connectors). Test 8a. load, transverse
11/30/2010 - PDF - English - BSI
Learn More€151.00 -
UNE-EN 61076-3-115:2010
Connectors for electronic equipment - Product requirements -- Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type (Endorsed by AENOR in November of 2010.)
11/1/2010 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN 60603-7-7:2010
Connectors for electronic equipment -- Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz (Endorsed by AENOR in November of 2010.)
11/1/2010 - PDF - English - AENOR
Learn More€71.00 -
BS EN 61076-3-115:2010
Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification protective housings use with 8-way shielded and unshielded connectors frequencies up to 600 MHz industrial environments incorporating the IEC 60603-7 series interface. Variant 12 related 61076-3-106. Push-pull type
10/31/2010 - PDF - English - BSI
Learn More€250.00 -
BS EN 60603-7-7:2010
Connectors for electronic equipment Detail specification 8-way, shielded, free and fixed connectors data transmission with frequencies up to 600 MHz
10/31/2010 - PDF - English - BSI
Learn More€250.00 -
EIA-364-12A:2010 (R2017)
TP-12A RESTRICTED ENTRY TEST PROCEDURE FOR ELECTRICAL CONNECTORS
10/1/2010 - PDF sécurisé - English - EIA
Learn More€75.60 -
DIN EN 61076-4-101 Berichtigung 1:2010-10
Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 - (IEC 61076-4-101:2001), German version EN 61076-4-101:2001, Corrigendum to DIN EN 61076-4-101:2002-09, (IEC-Cor. 1:2003 to IEC 61076-4-101:2001)
10/1/2010 - PDF - German - DIN
Learn More€0.00 -
NF EN 60512-9-1, C93-400-9-1 (10/2010)
Connectors for electronic equipment - Tests and measurements - Part 9-1 : endurance tests - Test 9a : mechanical operation - Connecteurs pour équipements électroniques
10/1/2010 - Paper - French - AFNOR
Learn More€72.00 -
UNE-EN 60603-7-2:2010
Connectors for electronic equipment -- Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz (Endorsed by AENOR in October of 2010.)
10/1/2010 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN 60603-7-3:2010
Connectors for electronic equipment -- Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz (Endorsed by AENOR in October of 2010.)
10/1/2010 - PDF - English - AENOR
Learn More€59.00 -
UNE-EN 60603-7-5:2010
Connectors for electronic equipment -- Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHzMHz (Endorsed by AENOR in October of 2010.)
10/1/2010 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN 60603-7-4:2010
Connectors for electronic equipment -- Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz (Endorsed by AENOR in October of 2010.)
10/1/2010 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN 61076-3-118:2010
Connectors for electronic equipment - Product requirements -- Part 3-118: Rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling (Endorsed by AENOR in October of 2010.)
10/1/2010 - PDF - English - AENOR
Learn More€71.00 -
UNE-EN 60512-19-1:2010
Connectors for electronic equipment - Tests and measurements -- Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels (Endorsed by AENOR in September of 2010.)
9/1/2010 - PDF - English - AENOR
Learn More€24.00 -
UNE-EN 61076-2-107:2010
Connectors for electronic equipment - Product requirements -- Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking (Endorsed by AENOR in September of 2010.)
9/1/2010 - PDF - English - AENOR
Learn More€74.00 -
BS EN 61076-3-118:2010
Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification a 4 pole + PE power connector with push-pull coupling
8/31/2010 - PDF - English - BSI
Learn More€293.00 -
BS EN 60603-7-2:2010
Connectors for electronic equipment Detail specification 8-way, unshielded, free and fixed connectors, data transmissions with frequencies up to 100 MHz
8/31/2010 - PDF - English - BSI
Learn More€180.00 -
BS EN 60603-7-3:2010
Connectors for electronic equipment Detail specification 8-way, shielded, free and fixed connectors, data transmission with frequencies up to 100 MHz
8/31/2010 - PDF - English - BSI
Learn More€180.00 -
BS EN 60603-7-4:2010
Connectors for electronic equipment Detail specification 8-way, unshielded, free and fixed connectors, data transmissions with frequencies up to 250 MHz
8/31/2010 - PDF - English - BSI
Learn More€180.00 -
BS EN 60603-7-5:2010
Connectors for electronic equipment Detail specification 8-way, shielded, free and fixed connectors, data transmissions with frequencies up to 250 MHz
8/31/2010 - PDF - English - BSI
Learn More€398.00 -
NF EN 60603-7-41, C93-430-7-41 (08/2010)
Connectors for electronic equipment - Part 7-41 : detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz
8/1/2010 - Paper - French - AFNOR
Learn More€88.33 -
NF EN 60603-7-51, C93-430-7-51 (08/2010)
Connectors for electronic equipment - Part 7-51 : detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz
8/1/2010 - Paper - French - AFNOR
Learn More€88.33 -
UNE-EN 60512-9-1:2010
Connectors for electronic equipment - Tests and measurements -- Part 9-1: Endurance tests - Test 9a: Mechanical operation (Endorsed by AENOR in August of 2010.)
8/1/2010 - PDF - English - AENOR
Learn More€24.00 -
BS EN 60512-19-1:2010
Connectors for electronic equipment. Tests and measurements Chemical resistance tests. Test 19a. Fluid of pre-insulated crimp barrels
7/31/2010 - PDF - English - BSI
Learn More€151.00 -
BS EN 61076-2-107:2010
Connectors for electronic equipment. Product requirements Detail specification circular hybrid connectors M12 with electrical and fibre-optic contacts screw locking
7/31/2010 - PDF - English - BSI
Learn More€293.00 -
BS EN 61076-3-101:1997
Connectors with assessed quality, for use in d.c., low-frequency analogue and digital high-speed data applications Rectangular connectors. Detail specification a range of shielded connectors trapezoidal shaped shells non-removable rectangular contacts on 1,27 mm x 2,54 centre-line
7/31/2010 - PDF - English - BSI
Learn More€348.00 -
BS EN 60603-7-41:2010
Connectors for electronic equipment Detail specification 8-way, unshielded, free and fixed connectors, data transmissions with frequencies up to 500 MHz
6/30/2010 - PDF - English - BSI
Learn More€180.00 -
BS EN 60603-7-51:2010
Connectors for electronic equipment Detail specification 8-way, shielded, free and fixed connectors, data transmissions with frequencies up to 500 MHz
6/30/2010 - PDF - English - BSI
Learn More€180.00 -
IEC 60603-7-71:2010
IEC 60603-7-71:2010 Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz
6/28/2010 - PDF - English, French - IEC
Learn More€132.00 -
IEC 60603-7-7:2010
IEC 60603-7-7:2010 Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz
5/31/2010 - PDF - English, French - IEC
Learn More€219.00 -
DD IEC/PAS 61076-2-110:2010
Connectors for electronic equipment. Product requirements Circular connectors. Detail specification circular connectors M 12 x 1 with screw-locking, high speed Ethernet and data communication frequencies up to 500 MHz 10 gigabits/s
4/30/2010 - PDF - English - BSI
Learn More€250.00 -
IEC 61076-2-107:2010
IEC 61076-2-107:2010 Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
4/29/2010 - PDF - English, French - IEC
Learn More€270.00 -
IEC 61076-3-118:2010
IEC 61076-3-118:2010 Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling
4/26/2010 - PDF - English, French - IEC
Learn More€219.00 -
IEC 60603-7-5:2010
IEC 60603-7-5:2010 Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
4/26/2010 - PDF - English, French - IEC
Learn More€92.00