Page 2 | 31.220.10 : Plug-and-socket devices. Connectors 31.220 : Electromechanical components for electronic and telecommunications equipment 31 : Electronics ICS

IEC 60512-28-100:2019

IEC 60512-28-100:2019 Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g
11/15/2019 - PDF - English, French -
Learn More

€311.00

IEC 60512-28-100:2019 + Redline

IEC 60512-28-100:2019 (Redline version) Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g
11/15/2019 - PDF - English -
Learn More

€404.00

NF EN IEC 61076-3-123, C93-406-3-123 (11/2019)

Connectors for electrical and electronic equipment - Product requirements - Part 3-123 : rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking - Connecteurs pour équipements électroniques - Exigences de produit - Partie 3-123 : Connecteurs rectangulaires - Spécification particulière relative aux connecteurs hybrides dans des environnements industriels pour l'alimentation et la transmission de données fibronique, avec verrouillage de type
11/1/2019 - Paper - French -
Learn More

€153.50

19/30390161 DC:2019

BS EN IEC 61076-8-106. Connectors for Electrical and Electronic Equipment. Product Requirements Part 8-106. Power connectors. Detail specification 2 pole push-pull snap locking rectangular connectors with fuses, rated voltage of 400 V DC current 16 A
11/1/2019 - PDF - English -
Learn More

€24.00

19/30371696 DC:2019

BS IEC 61076-3-126. Connectors for electrical and electronic equipment. Product requirements Part 3-126. Rectangular connectors. Detail specification 5way power connector industrial environments with push-pull locking
11/1/2019 - PDF - English -
Learn More

€24.00

BS EN IEC 61169-24:2019

Radio-frequency connectors Sectional specification. Radio frequency coaxial with screw coupling, typically for use in 75 O cable networks (type F)
10/7/2019 - PDF - English -
Learn More

€250.00

DIN EN 61076-1:2019-10

Connectors for electronic equipment - Product requirements - Part 1: Generic specification (IEC 61076-1:2006 + A1:2019), German version EN 61076-1:2006 + A1:2019.
10/1/2019 - PDF - German -
Learn More

€110.00

IEC 61076-3-123:2019

IEC 61076-3-123:2019 Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking
9/13/2019 - PDF - English, French -
Learn More

€311.00

IEEE 1505.1:2019 Redline

IEEE Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505
8/20/2019 - PDF - English -
Learn More

€208.00

IEEE 1505.1:2019

IEEE Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505
8/20/2019 - Paper - English -
Learn More

€255.00

IEEE 1505.1:2019

IEEE Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505
8/20/2019 - PDF - English -
Learn More

€152.00

DIN EN IEC 63171-4:2019-08

Connectors for electrical and electronic equipment - Part 4: Detail specification for 2-way, shielded or unshielded, free and fixed connectors: mechanical mating information, pin assignment and additional requirements for type 4 (IEC 48B/2724/CD:2019), Text in German and English
8/1/2019 - PDF - English, German -
Learn More

€99.35

IEC 61169-24:2019 + Redline

IEC 61169-24:2019 (Redline version) Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 O cable networks (type F)
7/19/2019 - PDF - English -
Learn More

€284.00

IEC 61169-24:2019

IEC 61169-24:2019 Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 O cable networks (type F)
7/19/2019 - PDF - English, French -
Learn More

€219.00

BS EN 61076-1:2006+A1:2019

Connectors for electronic equipment. Product requirements Generic specification
7/15/2019 - PDF - English -
Learn More

€293.00

NF EN IEC 60512-11-1, C93-400-11-1 (07/2019)

Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1 : climatic tests - Test 11a - Climatic sequence - Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure - Partie 11 : Essais climatiques - Section 1 : Essai 11a - Séquence climatique
7/1/2019 - Paper - French -
Learn More

€88.33

UNE-EN IEC 60512-99-002:2019

Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (Endorsed by Asociación Española de Normalización in June of 2019.)
6/1/2019 - PDF - English -
Learn More

€60.00

UNE-EN IEC 61076-3-124:2019

Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz (Endorsed by Asociación Española de Normalización in June of 2019.)
6/1/2019 - PDF - English -
Learn More

€83.00

NF EN IEC 61076-3-124, C93-406-3-124 (05/2019)

Connectors for electrical and electronic equipment - Product requirements - Part 3-124 : rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz
5/1/2019 - Paper - English -
Learn More

€141.33

NF EN IEC 60512-99-002, C93-400-99-002 (04/2019)

Connectors for electronic equipment - tests and measurements - Part 99-002 : endurance test schedules - Test 99b : test schedule for unintended unmating under electrical load
4/1/2019 - Paper - French -
Learn More

€88.33

UNE-EN 61076-1:2006/A1:2019

Connectors for electronic equipment - Product requirements - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in April of 2019.)
4/1/2019 - PDF - English -
Learn More

€64.00

IEC 61076-3-124:2019

IEC 61076-3-124:2019 Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz
3/11/2019 - PDF - English, French -
Learn More

€311.00

19/30389541 DC:2019

BS EN 61076-3-106. Connectors for electrical and electronic equipment. Product requirements Part 3-106. Rectangular connectors. Detail specification protective housings use with 8-way shielded unshielded connectors industrial environments incorporating the IEC 60603-7 series interface
3/8/2019 - PDF - English -
Learn More

€24.00

19/30392895 DC:2019

BS EN IEC 61076-3-125. Connectors for electrical and electronic components. Product requirements Part 6. Connectors. Detail specification 2-way 4-way (data/power), shielded, free fixed connectors transmission capability power supply with frequencies up to 600 MHz
3/8/2019 - PDF - English -
Learn More

€24.00

NF EN 61076-1/A1, C93-406-1/A1 (03/2019)

Connectors for electronic equipment - Product requirements - Part 1 : generic specification - Amendement 1 : Connecteurs pour équipements électroniques - Exigences de produit - Partie 1 : Spécification générique
3/1/2019 - Paper - French -
Learn More

€103.33

NF EN IEC 60512-23-3, C93-400-23-3 (03/2019)

Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3 : screening and filtering tests - Test 23c : Shielding effectiveness of connectors and accessories - Line injection method - Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure - Partie 23-3 : Essai 23c : Efficacité de blindage des connecteurs et des accessoires
3/1/2019 - Paper - French -
Learn More

€88.00

VG 95319-2 Beiblatt 1:2019-02

Electrical connectors and plug-and-socket devices - Part 2: Generic standard, guide for the selection of connectors and backshells for screened cable systems, Text in German and English
2/1/2019 - PDF - English, German -
Learn More

€169.25

IEC 61076-1:2006/AMD1:2019

IEC 61076-1:2006/AMD1:2019 Amendment 1 - Connectors for electronic equipment - Product requirements - Part 1: Generic specification
1/11/2019 - PDF - English, French -
Learn More

€23.00

IEC 61076-1:2006+AMD1:2019 Edition 2.1

IEC 61076-1:2006+AMD1:2019 (Consolidated version) Connectors for electronic equipment - Product requirements - Part 1: Generic specification
1/11/2019 - PDF - English, French -
Learn More

€247.00

VG 96938-1:2019-01

Electrical connectors and plug-and-socket devices - Ethernet connectors for data transmissions with threaded coupling (IP X7), up to 60 V - Part 1: Requirements, tests, detail standard, Text in German and English.
1/1/2019 - PDF - English, German -
Learn More

€115.33

UNE-EN IEC 60512-1:2018

Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in January of 2019.)
1/1/2019 - PDF - English -
Learn More

€63.00

VG 96938-3:2019-01

Electrical connectors and plug-and-socket devices - Ethernet connectors for data transmissions with threaded coupling (IP X7), up to 60 V - Part 3: Dimensions, mass, shielded, detail standard, Text in German and English.
1/1/2019 - PDF - English, German -
Learn More

€72.80

BS EN IEC 60512-1:2018

Connectors for electrical and electronic equipment. Tests measurements Generic specification
12/6/2018 - PDF - English -
Learn More

€180.00

DIN EN IEC 61076-3-119 VDE 0687-76-3-119:2018-12

Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz (IEC 61076-3-119:2017), German version EN IEC 61076-3-119:2018
12/1/2018 - Paper - German -
Learn More

€98.49

NF EN IEC 60512-1, C93-400-1 (11/2018)

Connectors for electrical and electronic equipment - Tests and measurements - Part 1 : generic specification
11/1/2018 - Paper - French -
Learn More

€85.33

PD IEC PAS 60512-27-200:2018

Connectors for electrical and electronic equipment. Tests measurements Additional specifications signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors. 27a 27g
10/25/2018 - PDF - English -
Learn More

€398.00

IEC 60512-1:2018

IEC 60512-1:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
10/22/2018 - PDF - English, French -
Learn More

€92.00

IEC 60512-1:2018 + Redline

IEC 60512-1:2018 (Redline version) Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
10/22/2018 - PDF - English -
Learn More

€120.00

DIN EN IEC 60512-8-3 VDE 0687-512-8-3:2018-10

Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever (IEC 60512-8-3:2018), German version EN IEC 60512-8-3:2018
10/1/2018 - Paper - German -
Learn More

€45.89

DIN EN IEC 60512-15-2 VDE 0687-512-15-2:2018-10

Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) (IEC 60512-15-2:2018), German version EN IEC 60512-15-2:2018
10/1/2018 - Paper - German -
Learn More

€42.45

VG 95319-2/A1:2018-10

Electrical connectors and plug-and-socket devices - Part 2: Generic standard, Amendment A1, Text in German and English
10/1/2018 - PDF - English, German -
Learn More

€72.80

DIN EN IEC 61076-2-111 VDE 0687-76-2-111:2018-10

Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking (IEC 61076-2-111:2017), German version EN IEC 61076-2-111:2018
10/1/2018 - Paper - German -
Learn More

€155.17

VG 96513-5:2018-09

Electrical connectors and plug-and-socket devices - Modular rectangular connector - Part 5: Contacts and contact inserts, detail standard, Text in German and English.
9/1/2018 - PDF - English, German -
Learn More

€92.62

UNE-EN IEC 61076-2-111:2018

Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking (Endorsed by Asociación Española de Normalización in August of 2018.)
8/1/2018 - PDF - English -
Learn More

€110.00

BS EN 60603-7-81:2016

Connectors for electronic equipment Detail specification 8-way, shielded, free and fixed connectors, data transmissions with frequencies up to 2 000 MHz
6/7/2018 - PDF - English -
Learn More

€250.00

DIN EN 61076-3-104 VDE 0687-76-3-104:2018-06

Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz (IEC 61076-3-104:2017), German version EN 61076-3-104:2017
6/1/2018 - Paper - German -
Learn More

€169.34

IEC 62946-01:2018

IEC 62946-01:2018 Connectors for electrical and electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A
5/24/2018 - PDF - English -
Learn More

€219.00

UNE-EN IEC 60512-15-2:2018

Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) (Endorsed by Asociación Española de Normalización in May of 2018.)
5/1/2018 - PDF - English -
Learn More

€57.00

BS EN IEC 60512-15-2:2018

Connectors for electrical and electronic equipment. Tests measurements Connector tests (mechanical). Test 15b: Insert retention in housing (axial)
4/24/2018 - PDF - English -
Learn More

€151.00

DIN EN 61076-3-122 VDE 0687-76-3-122:2018-04

Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments (IEC 61076-3-122:2017), German version EN 61076-3-122:2017
4/1/2018 - Paper - German -
Learn More

€91.70

UNE-EN IEC 61076-3-119:2018

Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz (Endorsed by Asociación Española de Normalización in April of 2018.)
4/1/2018 - PDF - English -
Learn More

€76.00

DIN EN 61076-3-125 VDE 0687-76-3-125:2018-04

Connectors for electrical and electronic components - Product requirements - Part 3-125: Connectors - Detail specification for 2-way and 4-way (data/power), shielded, free and fixed connectors for transmission capability and power supply capability with frequencies up to 600 MHz (IEC 48B/2600/CD:2017), Text in German and English
4/1/2018 - Paper - German -
Learn More

€42.45

BS EN IEC 61076-3-119:2018

Connectors for electrical and electronic equipment. Product requirements Rectangular connectors. Detail specification shielded unshielded, free fixed 10-way connectors with push-pull coupling industrial environments data transmission frequencies up to 100 MHz
3/26/2018 - PDF - English -
Learn More

€293.00

BS EN IEC 61076-2-111:2018

Connectors for electrical and electronic equipment. Product requirements Circular connectors. Detail specification power connectors with M12 screw-locking
3/26/2018 - PDF - English -
Learn More

€377.00

NF EN IEC 60512-8-3, C93-400-8-3 (03/2018)

Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3 : static load tests (fixed connectors) - Test 8c : robustness of actuating lever
3/1/2018 - Paper - French -
Learn More

€69.60

VG 95324-10:2018-03

Electrical connectors and plug-and-socket devices - connectors for printed boards - Part 10: Pin and socket connectors with circular contacts, detail standard, Text in German and English
3/1/2018 - PDF - English, German -
Learn More

€99.35

NF EN IEC 61076-2-111, C93-406-2-111 (03/2018)

Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 2-111 : connecteurs circulaires - Spécification particulière pour les connecteurs d'alimentation à vis M12
3/1/2018 - Paper - French -
Learn More

€183.00

NF EN 61726, C93-586 (03/2018)

Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method - Câbles, cordons, connecteurs et composants hyperfréquence passifs
3/1/2018 - Paper - French -
Learn More

€85.42

NF EN IEC 60512-15-2, C93-400-15-2 (03/2018)

Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2 : connector tests (mechanical) - Test 15b : insert retention in housing (axial)
3/1/2018 - Paper - French -
Learn More

€69.60

NF EN IEC 61076-3-119, C93-403-3-119 (03/2018)

Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 3-119 : connecteurs rectangulaires - Spécification particulière pour les fiches et les embases rectangulaires écrantées et non écrantées à 10 pôles, à accouplement pousser tirer, destinées à être utilisées dans des environnements industriels, pour les transmissions de données avec des fréquences allant jusqu'à 100 MHz
3/1/2018 - Paper - French -
Learn More

€127.50

PD IEC/PAS 61076-3-126:2018

Connectors for electrical and electronic equipment. Product requirements Rectangular connectors - Detail specification 5 pole power connector industrial environments with push-pull locking
2/28/2018 - PDF - English -
Learn More

€331.00

JIS C 5402-17-3:2018

Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
2/20/2018 - PDF - Japanese -
Learn More

€32.50

DIN EN 61076-2-113 VDE 0687-2-113:2018-02

Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz (IEC 61076-2-113:2017), German version EN 61076-2-113:2017
2/1/2018 - Paper - German -
Learn More

€98.49

IEC 60512-15-2:2018

IEC 60512-15-2:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)
1/12/2018 - PDF - English, French -
Learn More

€23.00

EIA-364-78C:2018

TP-78C Cavity Leakage Bonding Integrity Test Procedure for Electrical Connectors
1/1/2018 - PDF sécurisé - English -
Learn More

€78.75

ANSI/VITA 46.9:2018

PMC/XMC Rear I/O Fabric Signal Mapping on 3U and 6U VPX Modules Standard
1/1/2018 - PDF - English -
Learn More

€90.00

IEC 61076-3-119:2017

IEC 61076-3-119:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
12/8/2017 - PDF - English, French -
Learn More

€270.00

IEC 61076-3-119:2017

IEC 61076-3-119:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
12/8/2017 - PDF - English -
Learn More

€270.00

IEC 61076-2-111:2017

IEC 61076-2-111:2017 Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
12/7/2017 - PDF - English, French -
Learn More

€397.00

IEC 61076-2-111:2017

IEC 61076-2-111:2017 Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
12/7/2017 - PDF - English -
Learn More

€397.00

BS EN 61000-4-39:2017

Electromagnetic compatibilty (EMC) Testing and measurement techniques. Radiated fields in close proximity. Immunity test
11/21/2017 - PDF - English -
Learn More

€331.00

BS EN 61076-2-113:2017

Connectors for electronic equipment. Product requirements Circular connectors. Detail specification connectors with M12 screw locking power and signal contacts data transmission frequency up to 100 MHz
11/20/2017 - PDF - English -
Learn More

€293.00

UNE-EN 61076-3-122:2017

Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments (Endorsed by Asociación Española de Normalización in November of 2017.)
11/1/2017 - PDF - English -
Learn More

€72.00

EIA-364-117:2017 (R2023)

TP-117 Dielectric Breakdown Voltage Test Procedure for Electrical Connectors, Sockets and Coaxial Contacts
11/1/2017 - PDF sécurisé - English -
Learn More

€83.00

UNE-EN 61076-3-104:2017

Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz (Endorsed by Asociación Española de Normalización in November of 2017.)
11/1/2017 - PDF - English -
Learn More

€28.00

BS EN 61076-3-104:2017

Connectors for electrical and electronic equipment. Product requirements Detail specification 8-way, shielded free fixed connectors data transmissions with frequencies up to 2 000 MHz
10/24/2017 - PDF - English -
Learn More

€377.00

UNE-EN 60603-7-81:2016/AC:2017-07

Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz (Endorsed by Asociación Española de Normalización in September of 2017.)
9/1/2017 - PDF - English -
Learn More

€0.00

NF EN 61076-3-104, C93-406-3-104 (09/2017)

Connectors for electronic equipment - Product requirements - Part 3-104 : detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2000 MHz - Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 3-104 : spécification particulière pour les fiches et les embases écrantées à 8 voies pour la transmission de données à des fréquences jusqu'à 2 000 MHz
9/1/2017 - Paper - French -
Learn More

€197.00

NF EN 61076-2-113, C93-406-2-113 (08/2017)

Connectors for electronic equipment - Product requirements - Part 2-113 : circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz - Connecteurs pour équipements électroniques - Exigences de produit - Partie 2-113 : Connecteurs circulaires - Spécification particulière relative aux connecteurs à contacts de puissance et de données, avec verrouillage à vis M12 pour des fréquences jusqu'à 100 MHz
8/1/2017 - Paper - French -
Learn More

€127.67

DIN EN 61076-8-102 VDE 0687-76-8-102:2017-07

Connectors for electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 150 A (IEC 48B/2544/CD:2016)
7/1/2017 - Paper - German -
Learn More

€38.31

DIN EN 60603-7-82 VDE 0687-7-82:2017-07

Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz (IEC 60603-7-82:2016), German version EN 60603-7-82:2016
7/1/2017 - Paper - German -
Learn More

€61.54

DIN EN 61076-8-100 VDE 0687-76-8-100:2017-07

Connectors for electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 20 A (IEC 48B/2542/CD:2016)
7/1/2017 - Paper - German -
Learn More

€38.31

DIN EN 61076-3-124 VDE 0687-76-3-124:2017-07

Connectors for electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10way, shielded, free and fixed rectangular connectors for I/O and data transmission capability with frequencies up to 500 MHz (IEC 48B/2552/CD:2017)
7/1/2017 - Paper - German -
Learn More

€38.31

UNE-EN 61076-2-113:2017

Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz (Endorsed by Asociación Española de Normalización in July of 2017.)
7/1/2017 - PDF - English -
Learn More

€75.00

DIN EN 61076-8-101 VDE 0687-76-8-101:2017-07

Connectors for electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 40 A (IEC 48B/2543/CD:2016)
7/1/2017 - Paper - German -
Learn More

€38.31

DIN EN 60512-23-3 VDE 0687-512-23-3:2017-07

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories (IEC 48B/2559/CD:2017)
7/1/2017 - Paper - German -
Learn More

€18.19

VG 96944-5:2017-06

Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 5: Contacts and contact inserts, detail standard, Text in German and English.
6/1/2017 - PDF - English, German -
Learn More

€85.79

DIN EN 61076-3-110 VDE 0687-76-3-110:2017-06

Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz (IEC 61076-3-110:2016), German version EN 61076-3-110:2016
6/1/2017 - Paper - German -
Learn More

€61.54

VG 96944-3:2017-06

Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 3: Mating dimensions, detail standard, Text in German and English
6/1/2017 - PDF - English, German -
Learn More

€72.80

VG 96944-1:2017-06

Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 1: Requirements, tests, detail standard, Text in German and English
6/1/2017 - PDF - English, German -
Learn More

€114.10

VG 96944-4:2017-06

Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 4: Dimensions, mass, detail standard, Text in German and English.
6/1/2017 - PDF - English, German -
Learn More

€65.89

DIN EN 61076-3-120 VDE 0687-76-3-120:2017-06

Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A (IEC 61076-3-120:2016), German version EN 61076-3-120:2016
6/1/2017 - Paper - German -
Learn More

€77.84

VG 96944-2:2017-06

Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 2: Mounting, detail standard, Text in German and English
6/1/2017 - PDF - English, German -
Learn More

€59.63

VG 95319-1006:2017-04

Electrical connectors and plug-and-socket devices - Part 1006: Circular connectors with threaded coupling and removable crimp contacts, wall mounting flange (MIL-DTL-38999/20G with amendment 4), Text in German and English
4/1/2017 - PDF - English, German -
Learn More

€68.30

VG 95319-1007:2017-04

Electrical connectors and plug-and-socket devices - Part 1007: Circular connectors with threaded coupling and removable crimp contacts, jam-nut mounting (MIL-DTL-38999/24J with amendment 2), Text in German and English
4/1/2017 - PDF - English, German -
Learn More

€68.30

17/30334978 DC:2017

BS EN 62946-01. Connectors for electronic equipment. Part 01. Rectangular connectors. Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A
3/6/2017 - PDF - English -
Learn More

€24.00

NF EN 60603-7-82, C93-430-7-82 (03/2017)

Connectors for electronic equipment - Part 7-82 : detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz
3/1/2017 - Paper - French -
Learn More

Specification for QSFP+ 10 Gb/s Pluggable Transceiver
12/1/2016 - PDF sécurisé - English -
Learn More

€222.60

DIN EN 61076-2-114 VDE 0687-2-114:2016-11

Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking (IEC 48B/2503/CD:2016)
11/1/2016 - Paper - German -
Learn More

€42.45

DIN EN 60512-1 VDE 0687-512-1:2016-11

Connectors for electronic equipment - Tests and measurements - Part 1: General (IEC 48B/2517/CD:2016)
11/1/2016 - Paper - German -
Learn More

€18.19

ASTM B1004-16(2022)

Standard Practice for Contact Performance Classification of Electrical Connection Systems
10/1/2016 - PDF - English -
Learn More

€48.00

DIN EN 60603-7-81 VDE 0687-603-7-81:2016-10

Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2000 MHz (IEC 60603-7-81:2015), German version EN 60603-7-81:2016
10/1/2016 - Paper - German -
Learn More

€61.54

DIN EN 61076-4-116 VDE 0687-76-4-116:2016-09

Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (IEC 61076-4-116:2012 + A1:2015), German version EN 61076-4-116:2012 + A1:2016
9/1/2016 - Paper - German -
Learn More

€121.28

IEC 61076-3-110:2016

IEC 61076-3-110:2016 Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz
8/30/2016 - PDF - English, French -
Learn More

€132.00

IEC 60603-7-82:2016

IEC 60603-7-82:2016 Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz
8/25/2016 - PDF - English, French -
Learn More

€132.00

IEC 61076-3-120:2016

IEC 61076-3-120:2016 Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
8/25/2016 - PDF - English, French -
Learn More

€173.00

NF EN 60603-7-81, C93-430-7-81 (08/2016)

Connectors for electronic equipment - Part 7-81 : detail specification for 8 - way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz
8/1/2016 - Paper - French -
Learn More

€93.50

DIN EN 60512-28-100 VDE 0687-512-28-100:2016-06

Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2000 MHz for IEC 60603-7 and IEC 61076-3 series connectors -Tests 28a to 28g (IEC 48B/2470/CD:2015)
6/1/2016 - Paper - German -
Learn More

€42.45

EIA-364-118:2016 (R2021)

Thermal Shock for Hermetic Electrical Connectors and Sockets
6/1/2016 - PDF sécurisé - English -
Learn More

€78.75

UNE-EN 60603-7-81:2016

Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz (Endorsed by AENOR in May of 2016.)
5/1/2016 - PDF - English -
Learn More

€63.00

DIN EN 62946-01 VDE 0687-461:2016-05

Connectors for electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transfer and with current up to 1A (IEC 48B/2466/CD:2015)
5/1/2016 - Paper - German -
Learn More

€29.12

UNE-EN 61076-4-116:2012/A1:2016

Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (Endorsed by AENOR in May of 2016.)
5/1/2016 - PDF - English -
Learn More

€42.00

NF EN 61076-4-116/A1, C93-406-4-116/A1 (05/2016)

Connectors for electronic equipment - Product requirements - Part 4-116 : printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function - Connecteurs pour équipements électroniques - Exigences de produit
5/1/2016 - Paper - French -
Learn More

Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g (IEC 60512-29-100:2015), German version EN 60512-29-100:2015
3/1/2016 - Paper - German -
Learn More

€121.28

DIN EN 62946-02 VDE 0687-46-2:2016-03

Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, free and fixed high density connectors for data transmission up to 250 MHz and with Power over Ethernet capabilities (IEC 48B/2449/CD:2015)
3/1/2016 - Paper - German -
Learn More

€33.80

IEEE 1505.3:2015

IEEE Standard for the Universal Test Interface Framework and Pin Configuration for Portable/Benchtop Test Requirements Utilizing IEEE 1505(TM) Receiver Fixture Interface Standard
1/20/2016 - Paper - English -
Learn More

€67.00

IEEE 1505.3:2015

IEEE Standard for the Universal Test Interface Framework and Pin Configuration for Portable/Benchtop Test Requirements Utilizing IEEE 1505(TM) Receiver Fixture Interface Standard
1/20/2016 - PDF - English -
Learn More

€53.00

VG 95351-2:2016-01

Electrical connectors and plug-and-socket devices - Connectors with bayonet coupling, butting contact, 7pole - Part 2: Recommendation for mounting, detail standard, Text in German and English.
1/1/2016 - PDF - English, German -
Learn More

€59.63

VG 96917-2:2016-01

Electrical connectors and plug-and-socket devices - Connectors, 2 poles - Part 2: Mounting instructions, detail standard, Text in German and English
1/1/2016 - PDF - English, German -
Learn More

€52.90

ASTM B1004-16(2022) + Redline

Standard Practice for Contact Performance Classification of Electrical Connection Systems
1/1/2016 - PDF - English -
Learn More

€57.00

VG 95351-1:2016-01

Electrical connectors and plug-and-socket devices - Connectors with bayonet coupling, butting contact, 7pole - Part 1: Requirements, tests, detail standard, Text in German and English
1/1/2016 - PDF - English, German -
Learn More

€99.35

VG 96917-3:2016-01

Electrical connectors and plug-and-socket devices - Connectors, 2 poles - Part 3: Dimensions, mass, detail standard, Text in German and English.
1/1/2016 - PDF - English, German -
Learn More

€85.79

IEEE/IEC 63004:2015

IEC/IEEE International standard for receiver fixture interface
12/30/2015 - PDF - English -
Learn More

€301.00

IEEE/IEC 63003:2015

IEC/IEEE International standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505(TM)
12/30/2015 - PDF - English -
Learn More

€311.00

IEEE/IEC 63004:2015

IEC/IEEE International standard for receiver fixture interface
12/30/2015 - Paper - English -
Learn More

€374.00

IEEE/IEC 63003:2015

IEC/IEEE International standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505(TM)
12/30/2015 - Paper - English -
Learn More

€385.00

IEC 60603-7-81:2015

IEC 60603-7-81:2015 Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz
12/16/2015 - PDF - English, French -
Learn More

€132.00

BS EN 60512-29-100:2015

Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 500 MHz on M12 style connectors. 29a 29g
11/30/2015 - PDF - English -
Learn More

€348.00

IEC 61076-4-116:2012+AMD1:2015 Edition 1.1

IEC 61076-4-116:2012+AMD1:2015 (Consolidated version) Connectors for electronic equipment - Product requirements - Part4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
11/23/2015 - PDF - English, French -
Learn More

€443.00

IEC 61076-4-116:2012/AMD1:2015

IEC 61076-4-116:2012/AMD1:2015 Amendment 1 - Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
11/23/2015 - PDF - English, French -
Learn More

€46.00

JIS C 5401-1:2015

Connectors for electronic equipment - Product requirements - Part 1: Generic specification
11/20/2015 - PDF - Japanese -
Learn More

€25.00

JIS C 5402-13-1:2015

Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces
11/20/2015 - PDF - Japanese -
Learn More

€25.00

VG 96938-4:2015-11

Electrical connectors and plug-and-socket devices - Ethernet connectors for data transmissions with threaded coupling (IP X7), up to 60 V - Part 4: Dimensions, masses, non shielded, detail standard, Text in German and English.
11/1/2015 - PDF - English, German -
Learn More

€59.63

UNE-EN 60512-29-100:2015

Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g (Endorsed by AENOR in November of 2015.)
11/1/2015 - PDF - English -
Learn More

€90.00

DIN EN 60512-99-002 VDE 0687-512-99-002:2015-11

Connectors for electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for engaging and separating connectors under electrical load connectors (IEC 48B/2438/CD:2015)
11/1/2015 - Paper - German -
Learn More

€18.19

EIA-364-104B:2015 (R2020)

Flammability Test Procedure for Electrical Connectors
9/1/2015 - PDF sécurisé - English -
Learn More

€79.80

EIA-364-116:2015 (R2020)

Pin Contact Stability Test Procedure for Electrical Connectors
8/1/2015 - PDF sécurisé - English -
Learn More

€79.80

DIN EN 60512-5-1 Berichtigung 1:2015-06

Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests -Test 5a: Temperature rise (IEC 60512-5-1:2002), German version EN 60512-5-1:2002, Corrigendum to DIN EN 60512-5-1:2003-01
6/1/2015 - PDF - German -
Learn More

€0.00

DIN EN 61076-2-104 VDE 0687-76-2-104:2015-06

Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking (IEC 61076-2-104:2014), German version EN 61076-2-104:2014
6/1/2015 - Paper - German -
Learn More

€87.98

BS IEC 60512-1-101:2015

Connectors for electronic equipment. Tests and measurements Blank detail specification
5/31/2015 - PDF - English -
Learn More

€180.00

IEC 60512-1-101:2015

IEC 60512-1-101:2015 Connectors for electronic equipment - Tests and measurements - Part 1-101: Blank detail specification
5/5/2015 - PDF - English, French -
Learn More

€46.00

DIN EN 62680-2-2:2015-05

Universal Serial Bus interfaces for data and power - Part 2-2: Universal Serial Bus - Micro-USB Cables and Connectors Specification, Revision 1.01 (IEC 100/2332/CDV:2014), English version FprEN 62680-2-2:2014
5/1/2015 - PDF - English, German -
Learn More

€136.82

JIS C 5402-17-1:2015

Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness
4/20/2015 - PDF - Japanese -
Learn More

€25.00

JIS C 5402-16-9:2015

Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force
4/20/2015 - PDF - Japanese -
Learn More

€25.00

JIS C 5402-17-2:2015

Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
4/20/2015 - PDF - Japanese -
Learn More

€25.00

JIS C 5402-16-13:2015

Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections
4/20/2015 - PDF - Japanese -
Learn More

€25.00

JIS C 5402-16-8:2015

Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on contacts and terminations - Test 16h: Insulating grip effectiveness (crimped connections)
4/20/2015 - PDF - Japanese -
Learn More

€25.00

JIS C 5402-17-4:2015

Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion
4/20/2015 - PDF - Japanese -
Learn More

€25.00

JIS C 8121-2-3:2015

Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps
3/20/2015 - PDF - Japanese -
Learn More

€25.00

IEC 60512-29-100:2015

IEC 60512-29-100:2015 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
3/5/2015 - PDF - English, French -
Learn More

€345.00

VG 96923-3:2015-03

Electrical connectors and plug-and-socket devices - Connectors, 12 poles, solder termination - Part 3: Dimensions, mass, detail standard, Text in German and English.
3/1/2015 - PDF - English, German -
Learn More

€85.79

EIA-974:2015

Specification for Mini Multilane 10 Gb/s 4X Common Elements Connectors
3/1/2015 - PDF sécurisé - English -
Learn More

€102.90

VG 96923-1:2015-03

Electrical connectors and plug-and-socket devices - Connectors, 12 poles, solder termination - Part 1: Requirements, tests, detail standard, Text in German and English.
3/1/2015 - PDF - English, German -
Learn More

€99.35

DIN EN 62680-2-3:2015-03

Universal Serial Bus interfaces for data and power - Part 2-3: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 (IEC 100/2333/CDV:2014), English version FprEN 62680-2-3:2014
3/1/2015 - PDF - English, German -
Learn More

€136.82

EIA-975:2015

Specification for Mini Multilane 10 Gb/s 4X Unshielded Receptacle Shell and Plug
3/1/2015 - PDF sécurisé - English -
Learn More

€100.80

VG 96923-2:2015-03

Electrical connectors and plug-and-socket devices - Connectors, 12 poles, solder termination - Part 2: Mounting instructions, detail standard, Text in German and English
3/1/2015 - PDF - English, German -
Learn More

€52.90

EIA-976:2015

Specification for Mini Multilane 10 Gb/s 4X Shielded Receptacle Shell and Plug
3/1/2015 - PDF sécurisé - English -
Learn More

€102.90

DIN EN 62680-2:2015-02

Universal serial bus interfaces for data and power - Part 2: Universal serial bus - Micro-USB cables and connectors specification, revision 1.01 (IEC 62680-2:2013), English version EN 62680-2:2013
2/1/2015 - PDF - English, German -
Learn More

€136.82

DIN EN 61076-2-109 VDE 0687-76-2-109:2015-02

Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz (IEC 61076-2-109:2014), German version EN 61076-2-109:2014
2/1/2015 - Paper - German -
Learn More

€84.90

NF EN 61076-2-104, C93-406-2-104 (01/2015)

Connectors for electronic equipment - Product requirements - Part 2-104 : circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking - Connecteurs pour équipements électroniques
1/1/2015 - Paper - French -
Learn More

€119.00

ANSI/VITA 63.0:2015 (R2022)

Hyperboloid Alternative Connector for VPX
1/1/2015 - PDF - English -
Learn More

€60.00

DIN EN 60603-7/A2 VDE 0627-603-7/A2:2015-01

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (IEC 48B/2393/CD:2014)
1/1/2015 - Paper - German -
Learn More

€14.40

VG 96938-2:2014-12

Electrical connectors and plug-and-socket devices - Ethernet connectors for data transmissions with threaded coupling (IP X7), up to 60 V - Part 2: Mounting, detail standard, Text in German and English
12/1/2014 - PDF - English, German -
Learn More

€85.79

UNE-EN 61076-2-104:2014

Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking (Endorsed by AENOR in December of 2014.)
12/1/2014 - PDF - English -
Learn More

€75.00

BS EN 61076-2-104:2014

Connectors for electronic equipment. Product requirements Circular connectors. Detail specification circular connectors with M8 screw-locking or snap-locking
11/30/2014 - PDF - English -
Learn More

€293.00

DIN EN 62680-4:2014-11

Universal serial bus interfaces for data and power - Part 4: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 (IEC 62680-4:2013), English version EN 62680-4:2014
11/1/2014 - PDF - English, German -
Learn More

€131.96

UNE-EN 61076-2-109:2014

Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz (Endorsed by AENOR in October of 2014.)
10/1/2014 - PDF - English -
Learn More

€71.00