31.220 : Electromechanical components for electronic and telecommunications equipment
-
IEC 60512-11-12:2002
IEC 60512-11-12:2002 Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic
2/21/2002 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-11-13:2002
IEC 60512-11-13:2002 Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections
2/21/2002 - PDF - English, French - IEC
Learn More€12.00 -
IEC 60512-11-5:2002
IEC 60512-11-5:2002 Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth
2/21/2002 - PDF - English, French - IEC
Learn More€12.00 -
IEC 60512-11-6:2002
IEC 60512-11-6:2002 Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist
2/21/2002 - PDF - English, French - IEC
Learn More€12.00 -
IEC 60512-6-2:2002
IEC 60512-6-2:2002 Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump
2/21/2002 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-1-2:2002
IEC 60512-1-2:2002 Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass
2/21/2002 - PDF - English, French - IEC
Learn More€12.00 -
IEC 60512-11-9:2002
IEC 60512-11-9:2002 Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat
2/21/2002 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-11-10:2002
IEC 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
2/21/2002 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-6-1:2002
IEC 60512-6-1:2002 Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state
2/21/2002 - PDF - English, French - IEC
Learn More€23.00 -
IEC 61076-4-108:2002
IEC 61076-4-108:2002 Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
2/14/2002 - PDF - English - IEC
Learn More€397.00 -
BS EN 60512-1-4:1997
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General Test 1d. Contact protection effectiveness (scoop-proof)
2/12/2002 - PDF - English - BSI
Learn More€151.00 -
BS EN 61076-4-100:2002
Connectors with assessed quality, for use in d.c., low-frequency analogue and digital high speed data applications. Printed board connectors Detail specification two-part connector modules having a grid of 2,5 mm printed boards backplanes
1/18/2002 - PDF - English - BSI
Learn More€377.00 -
UNE-EN 60512-20-2:2001
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 20-2: Test 20b - Flammability tests - Fireproofness.
12/21/2001 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN 60512-20-2:2001
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 20-2: Test 20b - Flammability tests - Fireproofness.
12/21/2001 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN 61076-7:2001
Connectors for use in d.c., low-frequency analogue and digital high speed data applications -- Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification.
12/21/2001 - PDF - Spanish - AENOR
Learn More€80.00 -
UNE-EN 61076-7:2001
Connectors for use in d.c., low-frequency analogue and digital high speed data applications -- Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification.
12/21/2001 - PDF - English - AENOR
Learn More€96.00 -
IEC 61076-4-110:2001
IEC 61076-4-110:2001 Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
12/7/2001 - PDF - English, French - IEC
Learn More€345.00 -
UNE-EN 61076-3-100:2000
Connectors for use in d.c., low-frequency analogue and digital high speed data applications -- Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row (Endorsed by AENOR in December of 2001.)
12/1/2001 - PDF - English - AENOR
Learn More€78.00 -
BS EN 61076-4-107:2001
Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification shielded two-part having a basic grid of 2,0 mm, fixed part solder and press-in terminations printed boards, free non-accessible insulation displacement crimp
11/26/2001 - PDF - English - BSI
Learn More€331.00 -
BS EN 60512-25-4:2001
Connectors for electronic equipment. Test and measurements 25d. Propagation delay
11/19/2001 - PDF - English - BSI
Learn More€180.00 -
BS EN 60512-25-3:2001
Connectors for electronic equipment. Test and measurements 25c. Rise time degradation
11/16/2001 - PDF - English - BSI
Learn More€180.00 -
BS EN 60512-25-1:2001
Connectors for electronic equipment. Test and measurements 25a. Crosstalk ratio
11/16/2001 - PDF - English - BSI
Learn More€180.00 -
DIN EN 60512-12-7:2001-11
Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests, Test 12g: Solderability, wetting balance method (IEC 60512-12-7:2001), German version EN 60512-12-7:2001
11/1/2001 - PDF - German - DIN
Learn More€45.98 -
UNE-EN 60603-14:1999
Connectors for frequencies below 3 MHz for use with printed boards -- Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment. (Endorsed by AENOR in November of 2001.)
11/1/2001 - PDF - English - AENOR
Learn More€62.00 -
UNE-EN 60603-13:1998
Connectors for frequencies below 3 MHz for use with printed boards -- Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID). (Endorsed by AENOR in November of 2001.)
11/1/2001 - PDF - English - AENOR
Learn More€78.00 -
UNE-EN 60603-12:1998
Connectors for frequencies below 3 MHz for use with printed boards -- Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits. (Endorsed by AENOR in November of 2001.)
11/1/2001 - PDF - English - AENOR
Learn More€68.00 -
UNE-EN 60603-2:1998
Connectors for frequencies below 3 MHz for use with printed boards -- Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features. (Endorsed by AENOR in November of 2001.)
11/1/2001 - PDF - English - AENOR
Learn More€112.00 -
UNE-EN 60130-17:1999
Connectors for frequencies below 3 MHz -- Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries (Endorsed by AENOR in November of 2001.)
11/1/2001 - PDF - English - AENOR
Learn More€74.00 -
UNE-EN 61076-4-102:1997
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications -- Part 4: Printed board connectors -- Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917. (Endorsed by AENOR in November of 2001.)
11/1/2001 - PDF - English - AENOR
Learn More€74.00 -
UNE-EN 61076-4-103:1999
Connectors for use in d.c. low-frequency analogue and digital high speed data applications -- Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm. (Endorsed by AENOR in November of 2001.)
11/1/2001 - PDF - English - AENOR
Learn More€100.00 -
UNE-EN 61076-4-104:1999
Connectors for use in d.c. low-frequency analogue and digital high speed data applications -- Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm. (Endorsed by AENOR in November of 2001.)
11/1/2001 - PDF - English - AENOR
Learn More€110.00 -
UNE-EN 61076-4-105:1998
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications -- Part 4: Printed board connectors -- Section 105 : Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry. (Endorsed by AENOR in November of 2001.)
11/1/2001 - PDF - English - AENOR
Learn More€80.00 -
IEC 61076-4-100:2001
IEC 61076-4-100:2001 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
10/18/2001 - PDF - English, French - IEC
Learn More€397.00 -
EIA-540B0AA-A:2001
Detail Specification for Production Ball Grid Array (BGA) High Pin Count (1089 Pins and Greater) Socket for Use in Electronic Equipment
10/1/2001 - PDF sécurisé - English - EIA
Learn More€109.20 -
BS EN 60512-23-4:2001
Connectors for electronic equipment. Tests and measurements Screening filtering tests Test 23d. Transmission line reflections in the time domain
9/24/2001 - PDF - English - BSI
Learn More€180.00 -
UNE-EN 60603-8:2001
Connectors for frequencies below 3 MHz for use with printed boards -- Part 8: Two-part connectors for printed boards, for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm.
9/21/2001 - PDF - Spanish - AENOR
Learn More€89.00 -
UNE-EN 60603-8:2001
Connectors for frequencies below 3 MHz for use with printed boards -- Part 8: Two-part connectors for printed boards, for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm.
9/21/2001 - PDF - English - AENOR
Learn More€106.80 -
UNE-EN 60603-6:2001
Connectors for frequencies below 3 MHz for use with printed boards -- Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness.
9/21/2001 - PDF - Spanish - AENOR
Learn More€85.00 -
UNE-EN 60603-6:2001
Connectors for frequencies below 3 MHz for use with printed boards -- Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness.
9/21/2001 - PDF - English - AENOR
Learn More€102.00 -
IEC 61076-4-101:2001
IEC 61076-4-101:2001 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
9/18/2001 - PDF - English, French - IEC
Learn More€431.00 -
NF EN 61076-7, C93-406-7 (09/2001)
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7 : cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
9/1/2001 - Paper - French - AFNOR
Learn More€136.50 -
IEC 61076-4-107:2001
IEC 61076-4-107:2001 Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations
8/22/2001 - PDF - English, French - IEC
Learn More€311.00 -
BS EN 60512-12-7:2001
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Soldering tests Test 12g. Solderability, wetting balance method Section 7: 12g:
8/15/2001 - PDF - English - BSI
Learn More€151.00 -
IEC 60512-25-1:2001
IEC 60512-25-1:2001 Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio
7/26/2001 - PDF - English, French - IEC
Learn More€132.00 -
IEC 60512-25-3:2001
IEC 60512-25-3:2001 Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c - Rise time degradation
7/26/2001 - PDF - English, French - IEC
Learn More€46.00 -
IEC 60512-25-4:2001
IEC 60512-25-4:2001 Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay
7/26/2001 - PDF - English, French - IEC
Learn More€46.00 -
BS EN 60512-6-5:2001
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Dynamic stress tests Test 6e. Random vibration Section 5: 6e:
7/15/2001 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-20-2:2001
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods Test 20b. Flammability tests. Fireproofness Section 2: 20b -
7/15/2001 - PDF - English - BSI
Learn More€151.00 -
IEC 60512-23-4:2001
IEC 60512-23-4:2001 Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain
6/19/2001 - PDF - English, French - IEC
Learn More€92.00 -
BS EN 61076-7:2001
Connectors with assessed quality, for use in d.c., low-frequency analogue and digital high speed data applications Cable outlet accessories including qualification capability approval. Sectional specification
6/15/2001 - PDF - English - BSI
Learn More€293.00 -
DIN EN 61076-7:2001-06
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualifications and capability approval, Sectional specification (IEC 61076-7:2000), German version EN 61076-7:2000.
6/1/2001 - PDF - German - DIN
Learn More€104.95 -
DIN EN 60512-20-2:2001-04
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test: 20b: Flammability tests, Fireproofness (IEC 60512-20-2:2000), German version EN 60512-20-2:2000
4/1/2001 - PDF - German - DIN
Learn More€59.63 -
IEC 60512-12-7:2001
IEC 60512-12-7:2001 Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests - Test 12g: Solderability, wetting balance method
1/24/2001 - PDF - English, French - IEC
Learn More€12.00 -
UNE-EN 60512-6-5:2000
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 6: Dynamic stress tests -- Section 5: Test 6e: Random vibration.
12/26/2000 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 60512-6-5:2000
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 6: Dynamic stress tests -- Section 5: Test 6e: Random vibration.
12/26/2000 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN 60512-11-8:2000
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11: CLIMATIC TESTS. SECTION 8: TEST 11H. SAND AND DUST.
12/26/2000 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 60512-11-8:2000
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11: CLIMATIC TESTS. SECTION 8: TEST 11H. SAND AND DUST.
12/26/2000 - PDF - English - AENOR
Learn More€46.80 -
€25.00
-
DIN EN 60512-6-5:2000-10
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests, section 5: Test 6e: Random vibration (IEC 60512-6-5:1997, modified), German version EN 60512-6-5:1999
10/1/2000 - PDF - German - DIN
Learn More€52.90 -
EIA-448-19A:2000
Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using a Vapor Phase System
10/1/2000 - PDF sécurisé - English - EIA
Learn More€79.80 -
DIN EN 61076-3-100:2000-10
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality, detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row (IEC 61076-3-100:1999), German version EN 61076-3-100:2000
10/1/2000 - PDF - German - DIN
Learn More€131.96 -
EIA-520E000-A:2000
Sectional Specification In-Line Switches of Certified Quality
10/1/2000 - PDF sécurisé - English - EIA
Learn More€79.80 -
EIA-448-2A:2000
Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering
10/1/2000 - PDF sécurisé - English - EIA
Learn More€79.80 -
UNE-EN 61319-1/A11:2000
Interconnections of satellite receiving equipment. Part 1: Europe
9/4/2000 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 61319-1/A11:2000
Interconnections of satellite receiving equipment. Part 1: Europe
9/4/2000 - PDF - English - AENOR
Learn More€81.60 -
DIN EN 175101-802:2000-09
Detail specification - Two-part-connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows, German version EN 175101-802:1999
9/1/2000 - PDF - German - DIN
Learn More€136.82 -
DIN EN 175201-804:2000-09
Detail specification - Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling, German version EN 17201-804:1999
9/1/2000 - PDF - German - DIN
Learn More€120.84 -
IEC 60603-2:1995/AMD1:2000
IEC 60603-2:1995/AMD1:2000 Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
8/18/2000 - PDF - English, French - IEC
Learn More€92.00 -
EIA-700A0AF:2000
Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI)
7/1/2000 - PDF sécurisé - English - EIA
Learn More€191.10 -
IEC 61076-7:2000
IEC 61076-7:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specifiation
6/16/2000 - PDF - English, French - IEC
Learn More€270.00 -
IEC 61076-7:2000
IEC 61076-7:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specifiation
6/16/2000 - PDF - English - IEC
Learn More€270.00 -
EIA-540HAAA:2000
Detail Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment
6/1/2000 - PDF sécurisé - English - EIA
Learn More€100.80 -
UNE-EN 175101-802:1999
Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows (Endorsed by AENOR in June of 2000.)
6/1/2000 - PDF - English - AENOR
Learn More€96.00 -
UNE-EN 175201-804:1999
Detail Specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling (Endorsed by AENOR in June of 2000.)
6/1/2000 - PDF - English - AENOR
Learn More€87.00 -
BS EN 60068-2-40:2000
Environmental testing. Test methods Z/AM. Combined cold/low air pressure tests
4/15/2000 - PDF - English - BSI
Learn More€151.00 -
BS EN 175101-802:2000
Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors printed boards high number contacts with basic grid 2,54 mm on 3 or 4 rows
4/15/2000 - PDF - English - BSI
Learn More€348.00 -
BS EN 175201-804:2000
Harmonized system of quality assessment for electronic components Detail specification. Circular connectors. Round contacts, size diameter 1,6 mm, threaded coupling
4/15/2000 - PDF - English - BSI
Learn More€348.00 -
BS EN 196403:2000
Harmonized systems of quality assessment for electronic components. Blank detail specification: push button switches. Assessment level Y
4/15/2000 - PDF - English - BSI
Learn More€293.00 -
IEC 60512-20-2:2000
IEC 60512-20-2:2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness
4/13/2000 - PDF - English, French - IEC
Learn More€46.00 -
BS EN 60603-1:2000
Connectors for frequencies below 3 MHz use with printed boards Generic specification. General requirements and guide the preparation of detail specifications assessed quality
3/15/2000 - PDF - English - BSI
Learn More€250.00 -
BS EN 50049-1:1998
Domestic and similar electronic equipment interconnection requirements Peritelevision connector
2/15/2000 - PDF - English - BSI
Learn More€180.00 -
EIA-700AOAE:2000
Detail Specification for Trapezoidal Connectors with Nonremovable Ribbon Cable Contacts on 1.27mm Pitch Double Row Used with Single Connector Attachments (SCA2)
1/1/2000 - PDF sécurisé - English - EIA
Learn More€159.60 -
€60.00
-
UNE-EN 61008-2-1/A11:1999
RESIDUAL CURRENT OPERATED CIRCUIT-BRAKERS WITHOUT INTEGRAL OVERCURRENTPROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S). PART 2-1: APPLICABILITY OF THE GENERAL RULES TO RCCB'S FUNCTIONALLY INDEPENDENT OF LINE VOLTAGE.
12/31/1999 - PDF - Spanish - AENOR
Learn More€25.00 -
UNE-EN 61008-2-1/A11:1999
RESIDUAL CURRENT OPERATED CIRCUIT-BRAKERS WITHOUT INTEGRAL OVERCURRENTPROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S). PART 2-1: APPLICABILITY OF THE GENERAL RULES TO RCCB'S FUNCTIONALLY INDEPENDENT OF LINE VOLTAGE.
12/31/1999 - PDF - English - AENOR
Learn More€30.00 -
UNE-EN 61009-2-1/A11:1999
RESIDUAL CURRENT OPERATED CIRCUIT-BRAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBO'S). PART 2-1: APPLICAB ITY OF THE GENERAL RULES TO RCBO'S FUNCTIONALLY INDEPENDENT OF LINE VOLTAGE.
12/31/1999 - PDF - Spanish - AENOR
Learn More€25.00 -
DIN EN 60130-17:1999-12
Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries (IEC 60130-17:1998), German version EN 60130-17:1999
12/1/1999 - PDF - German - DIN
Learn More€99.35 -
NF EN 60603-14, C93-430-14 (12/1999)
Connectors for frequencies below 3 MHz for use with printed boards - Part 14 : detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment
12/1/1999 - Paper - French - AFNOR
Learn More€88.00 -
NF EN 60130-17, C93-407-17 (12/1999)
Connectors for frequencies below 3 MHz - Part 17 : detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries
12/1/1999 - Paper - French - AFNOR
Learn More€127.67 -
IEC 61076-3-100:1999
IEC 61076-3-100:1999 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
11/16/1999 - PDF - English, French - IEC
Learn More€311.00 -
DIN EN 61319-1:1999-11
Interconnections of satellite receiving equipment - Part 1: Europe (IEC 61319-1:1996), German version EN 61319-1:1996 + A11:1999
11/1/1999 - PDF - German - DIN
Learn More€104.95 -
DIN EN 60603-14:1999-11
Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment (IEC 60603-14:1998), German version EN 60603-14:1999
11/1/1999 - PDF - German - DIN
Learn More€72.80 -
BS EN 60603-14:1999
Connectors for frequencies below 3 MHz use with printed boards Detail specification circular connectors low-frequency audio and video applications such as audio, audio-visual equipment
10/15/1999 - PDF - English - BSI
Learn More€180.00 -
DIN EN 61076-4-104:1999-10
Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality, detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm (IEC 61076-4-104:1999), German version EN 61076-4-104:1999
10/1/1999 - PDF - German - DIN
Learn More€158.04 -
NF EN 61319-1/A11, C97-200-1/A11 (10/1999)
Interconnections of satellite receiving equipment - Part 1 : Europe
10/1/1999 - Paper - French - AFNOR
Learn More€88.33 -
UNE-EN 61076-3-101:1999
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 3: RECTANGULAR CONNECTORS. SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTRE-LINE.
9/30/1999 - PDF - Spanish - AENOR
Learn More€109.00 -
UNE-EN 61076-3-101:1999
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 3: RECTANGULAR CONNECTORS. SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTRE-LINE.
9/30/1999 - PDF - English - AENOR
Learn More€130.80 -
UNE-EN 60603-5:1999
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS. PART 5: EDGE-SOCKET CONNECTORS AND TWO-PART CONNECTORS FOR DOUBLE-SIDED PRINTED BOARDS WITH 2,54 MM (0,1 IN) SPACING.
9/21/1999 - PDF - Spanish - AENOR
Learn More€78.00 -
UNE-EN 60603-5:1999
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS. PART 5: EDGE-SOCKET CONNECTORS AND TWO-PART CONNECTORS FOR DOUBLE-SIDED PRINTED BOARDS WITH 2,54 MM (0,1 IN) SPACING.
9/21/1999 - PDF - English - AENOR
Learn More€93.60 -
BS EN 60130-17:1999
Connectors for frequencies below 3 MHz Detail specification interconnection devices which permit multi-directional mating, use with rechargeable batteries
9/15/1999 - PDF - English - BSI
Learn More€293.00 -
BS EN 61076-4-104:1999
Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification two-part modular connectors, basic grid of 2,0 mm, terminations on a multiple 0,5 mm two part (with optional shielding plates) printed boards and backplanes,
8/15/1999 - PDF - English - BSI
Learn More€377.00 -
DIN EN 61076-4-103:1999-08
Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality, detail specification for two-part connectors with shielding and a basic grid of 2,5 mm (IEC 61076-4-103:1999), German version EN 60176-4-103:1999
8/1/1999 - PDF - German - DIN
Learn More€152.71 -
NF EN 50157-2-2, C92-252-2 (08/1999)
Domestic and similar electronic equipment interconnection requirements : AV.link. Part 2-2 : basic system oriented commands.
8/1/1999 - Paper - French - AFNOR
Learn More€88.00 -
NF EN 50157-2-3, C92-252-3 (08/1999)
Domestic and similar electronic equipment interconnection requirements : AV.link. Part 2-3 : system oriented application.
8/1/1999 - Paper - French - AFNOR
Learn More€72.00 -
NF EN 50157-2-1, C92-252-1 (08/1999)
Domestic and similar electronic equipment interconnection requirements : AV.link. Part 2-1 : signal quality matching and automatic selection of source devices.
8/1/1999 - Paper - French - AFNOR
Learn More€116.33 -
EIA-540CAAD-A:1999
Detail Specification for 2 Pole, 5 A Relay Sockets
8/1/1999 - PDF sécurisé - English - EIA
Learn More€86.10 -
EIA-540CAAE-A:1999
Detail Specification for 3 Pole, 10 A Relay Sockets
8/1/1999 - PDF sécurisé - English - EIA
Learn More€81.90 -
UNE-EN 60603-1:1999
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS. APRT 1: GENERIC SPECIFICATION. GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY.
7/28/1999 - PDF - Spanish - AENOR
Learn More€73.00 -
UNE-EN 60603-1:1999
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS. APRT 1: GENERIC SPECIFICATION. GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY.
7/28/1999 - PDF - English - AENOR
Learn More€87.60 -
UNE-EN 60603-3:1999
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS. PART 3:TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING CONTACTS SPACED AT 2,54 MM (0,100 IN) CENTRES AND STAGGERED TERMINATIONS AT THAT SAME SPACING.
7/28/1999 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 60603-3:1999
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS. PART 3:TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING CONTACTS SPACED AT 2,54 MM (0,100 IN) CENTRES AND STAGGERED TERMINATIONS AT THAT SAME SPACING.
7/28/1999 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 60603-4:1999
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS. PART 4: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING CONTACT SPACED AT1,91 MM (0,075 IN) CENTRES AND STAGGED TERMINATIONS AT THAT SAME SPACING.
7/28/1999 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 60603-4:1999
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS. PART 4: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING CONTACT SPACED AT1,91 MM (0,075 IN) CENTRES AND STAGGED TERMINATIONS AT THAT SAME SPACING.
7/28/1999 - PDF - English - AENOR
Learn More€81.60 -
DIN EN 60512-11-8:1999-07
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests, Section 8: Test 11h: Sand and dust (IEC 60512-11-8:1995), German version EN 60512-11-8:1999.
7/1/1999 - PDF - German - DIN
Learn More€32.34 -
UNE-EN 60512-1-3:1999
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 1: GENERAL EXAMINATION. SECTION 3: TEST 1C - ELECTRICAL ENGAGEMENT LENGTH
6/28/1999 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60512-1-3:1999
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 1: GENERAL EXAMINATION. SECTION 3: TEST 1C - ELECTRICAL ENGAGEMENT LENGTH
6/28/1999 - PDF - English - AENOR
Learn More€40.80 -
BS EN 61076-4-103:1999
Connectors with assessed quality, for use in d.c., low-frequency analogue and digital high speed data applications. Printed board connectors Detail specification two-part shielding a basic grid of 2,5 mm Cable to connectors, shielded against EMC ,grid mm,for rates,for printed boards
6/15/1999 - PDF - English - BSI
Learn More€348.00 -
UNE-EN 60512-14-7:1999
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 14: SEALING TESTS. SECTION 7: TEST 14G: IMPACTING WATER
6/11/1999 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60512-14-7:1999
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 14: SEALING TESTS. SECTION 7: TEST 14G: IMPACTING WATER
6/11/1999 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 60512-19-3:1999
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 19: CHEMICAL RESISTANCE TESTS. SECTION 3: TEST 19C. FLUID RESISTANCE
6/11/1999 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN 60512-19-3:1999
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 19: CHEMICAL RESISTANCE TESTS. SECTION 3: TEST 19C. FLUID RESISTANCE
6/11/1999 - PDF - English - AENOR
Learn More€58.80 -
NF EN 50049-1/A1, C92-250/A1 (05/1999)
Domestic and similar electronic equipment interconnection requirements : peritelevision connector
5/1/1999 - Paper - French - AFNOR
Learn More€54.50 -
UNE-EN 60512-16-20:1999
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 16: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS. SECTION 20: TEST 16T: MECHANICAL STRENGHT (WIRED TERMINATION OF SOLDERLESS CONNECTIONS).
4/19/1999 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN 60512-16-20:1999
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 16: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS. SECTION 20: TEST 16T: MECHANICAL STRENGHT (WIRED TERMINATION OF SOLDERLESS CONNECTIONS).
4/19/1999 - PDF - English - AENOR
Learn More€32.40 -
BS EN 60512-11-8:1999
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic tests Test 11h. Sand dust
4/15/1999 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-11-8:1999 - SET
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic tests Test 11h. Sand dust
4/15/1999 - PDF - English - BSI
Learn More€151.00 -
IEC 61076-4-104:1999
IEC 61076-4-104:1999 Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm
3/19/1999 - PDF - English, French - IEC
Learn More€397.00 -
IEC 61076-4-103:1999
IEC 61076-4-103:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
2/26/1999 - PDF - English, French - IEC
Learn More€397.00 -
DIN EN 61076-4-105:1999-02
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry (IEC 61076-4-105:1995), German version EN 61076-4-105:1998
2/1/1999 - PDF - German - DIN
Learn More€120.84 -
UNE-EN 61076-4-001:1998
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 4: PRINTED BOARD CONNECTORS. SECTION 001: BLANK DETAIL SPECIFICATION.
12/11/1998 - PDF - Spanish - AENOR
Learn More€110.00 -
UNE-EN 61076-4-001:1998
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 4: PRINTED BOARD CONNECTORS. SECTION 001: BLANK DETAIL SPECIFICATION.
12/11/1998 - PDF - English - AENOR
Learn More€132.00 -
NF EN 50157-1, C92-251 (12/1998)
Domestic and similar electronic equipment interconnection requirements : AV.link. Part 1 : general.
12/1/1998 - Paper - French - AFNOR
Learn More€88.00 -
BS EN 60603-3:1998
Connectors for frequencies below 3 MHz use with printed boards Two-part connectors having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations that same spacing
11/15/1998 - PDF - English - BSI
Learn More€180.00 -
DIN EN 50049-1:1998-11
Domestic and similar electronic equipment interconnection requirements: Peritelevision connector, German version EN 50049-1:1997 + A1:1998
11/1/1998 - PDF - German - DIN
Learn More€79.72 -
EIA-540CAAC-A:1998
Detail Specification for 2 Pole, 10 A Relay Sockets
11/1/1998 - PDF sécurisé - English - EIA
Learn More€79.80 -
UNE-EN 50157-1:1998
DOMESTIC AND SIMILAR ELECTRONIC EQUIPMENT INTERCONNECTION REQUIREMENTS: AV. LINK. PART 1.GENERAL (Endorsed by AENOR in November of 1998.)
11/1/1998 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN 50157-2-1:1998
DOMESTIC AND SIMILAR ELECTRONIC EQUIPMENT INTERCONNECTION REQUIREMENTS: AV.LINK. PART 2-1: SIGNAL QUALITY MATCHING AND AUTOMATIC SELECTION OF SOURCE DEVICES. (Endorsed by AENOR in November of 1998.)
11/1/1998 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 50157-2-2:1998
DOMESTIC AND SIMILAR ELECTRONIC EQUIPMENT INTERCONNECTION REQUIREMENTS : AV.LINK. PART 2-2: BASIC SYSTEM ORIENTED COMMANDS. (Endorsed by AENOR in November of 1998.)
11/1/1998 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN 50157-2-3:1998
DOMESTIC AND SIMILAR ELECTRONIC EQUIPMENT INTERCONNECTION REQUIREMENTS:AV.LINK. PART 2-3: SYSTEM ORIENTED APPLICATION (Endorsed by AENOR in November of 1998.)
11/1/1998 - PDF - English - AENOR
Learn More€46.00 -
BS EN 61076-4-105:1998
Connectors with assessed quality, for use in d.c., low-frequency analogue and digital high speed data applications. Printed board connectors Detail specification 9 mm circular connector 3 to 8 contacts a wide range of applications including the telecommunication audio industry
10/15/1998 - PDF - English - BSI
Learn More€331.00 -
DIN 43460:1998-10
Contact occupation of plug connectors - Circuit breakers, rated voltage < 52 kV - Coordination of auxiliary and control-circuits
10/1/1998 - PDF - German - DIN
Learn More€39.35 -
DIN EN 60603-13:1998-09
Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) (IEC 60603-13:1995), German version EN 60603-13:1998
9/1/1998 - PDF - German - DIN
Learn More€104.95 -
UNE 71204:1998
INFORMATION TECHNOLOGY. TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS. 26-POLE INTERFACE CONNECTOR MATEABILITY DIMENSIONS AND CONTACT NUMBER ASIGNMENTS.
8/10/1998 - PDF - Spanish - AENOR
Learn More€49.00 -
DIN EN 60512-14-7:1998-07
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests; Section 7: Test 14g: Impacting water (IEC 60512-14-7:1997); German version EN 60512-14-17:1998
7/1/1998 - PDF - German - DIN
Learn More€39.35 -
DIN EN 60603-1:1998-07
Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification: General requirements and guide for the preparation of detail specifications, with assessed quality (IEC 60603-1:1991 + A1:1992); German version EN 60603-1:1998
7/1/1998 - PDF - German - DIN
Learn More€99.35 -
DIN EN 60603-3:1998-07
Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (O,1 in) centres and staggered terminations at that same spacing (IEC 60603-3:1987); German version EN 60603-3:1998
7/1/1998 - PDF - German - DIN
Learn More€92.62 -
DIN EN 60603-4:1998-07
Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing (IEC 60603-4:1987); German version EN 60603-4:1998
7/1/1998 - PDF - German - DIN
Learn More€92.62 -
DIN EN 60603-5:1998-07
Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing (IEC 60603-5:1987); German version EN 60603-5:1998
7/1/1998 - PDF - German - DIN
Learn More€115.33 -
DIN EN 60603-8:1998-07
Connectors for frequencies below 3 MHz for use with printed boards - Part 8: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm × 0,63 mm (IEC 60603-8:1990); German version EN 60603-8:1998
7/1/1998 - PDF - German - DIN
Learn More€131.96 -
DIN EN 60603-9:1998-07
Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) (IEC 60603-9:1990); German version EN 60603-9:1998
7/1/1998 - PDF - German - DIN
Learn More€152.71 -
DIN EN 60603-10:1998-07
Connectors for frequencies below 3 MHz for use with printed boards - Part 10: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type (IEC 60603-10:1991); German version EN 60603-10:1998
7/1/1998 - PDF - German - DIN
Learn More€104.95 -
DIN EN 60603-12:1998-07
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated cicuits (IEC 60603-12:1992); German version EN 60603-12:1998
7/1/1998 - PDF - German - DIN
Learn More€92.62 -
UNE 71200:1998
INFORMATION TECHNOLOGY. DATA COMMUNICATION 25-POLE DTE/DCE INTERFACE CONNECTOR AND CONTACT NUMBER ASSIGNMENTS.
6/30/1998 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE 71202:1998
INFORMATION TECHNOLOGY. DATA COMMUNICATION. 37-POLE DTE/DCE INTERFACE CONNECTOR AND CONTACT NUMBER ASIGNMENTS.
6/30/1998 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE 71203:1998
INFORMATION TECHNOLOGY. DATA COMMUNICATION. 15-POLE DTE/DCE INTERFACE CONNECTOR AND CONTACT NUMBER ASIGNMENTS.
6/30/1998 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE 71201:1998
INFORMATION TECHNOLOGY. TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS. 34-POLE DTE/DCE INTERFACE CONNECTOR MATEABILITY DIMENSIONS AND CONTACT NUMBER ASSIGNMENTS.
6/25/1998 - PDF - Spanish - AENOR
Learn More€68.00 -
NF EN 60603-12, C93-430-12 (06/1998)
Connectors for frequencies below 3 MHz for use with printed boards. . Part 12 : detail specification for dimensions, general requirements and tests for à range of socket designed for use with integrated circuits.
6/1/1998 - Paper - French - AFNOR
Learn More€103.00 -
NF EN 60603-13, C93-430-13 (06/1998)
Connectors for frequencies below 3 MHz for use with printed boards. . Part 13 : detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in) , with free connectors for non accessible insulation displacement terminations (ID).
6/1/1998 - Paper - French - AFNOR
Learn More€141.00 -
BS EN 60512-14-7:1998
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Sealing tests Test 14g. Impacting water
5/15/1998 - PDF - English - BSI
Learn More€151.00 -
BS EN 60603-13:1998
Connectors for frequencies below 3 MHz use with printed boards Detail specification two-part connectors of assessed quality, basic grid 2,54 mm (0,1 in) free non-accessible insulation displacement terminations (ID)
5/15/1998 - PDF - English - BSI
Learn More€293.00 -
BS EN 60603-12:1998
Connectors for frequencies below 3 MHz use with printed boards Detail specification dimensions, general requirements and tests a range of sockets designed integrated circuits
5/15/1998 - PDF - English - BSI
Learn More€250.00 -
BS EN 60603-10:1998
Connectors for frequencies below 3 MHz use with printed boards Two-part connectors basic grid of 2,54 mm (0,1 in), inverted type
5/15/1998 - PDF - English - BSI
Learn More€293.00 -
BS EN 60603-9:1998
Connectors for frequencies below 3 MHz use with printed boards Two-part connectors boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
5/15/1998 - PDF - English - BSI
Learn More€377.00 -
BS EN 60603-8:1998
Connectors for frequencies below 3 MHz use with printed boards Two-part connectors basic grid of 2,54 mm (0,1 in), square male contacts 0,63 x
5/15/1998 - PDF - English - BSI
Learn More€348.00 -
BS EN 60603-6:1998
Connectors for frequencies below 3 MHz use with printed boards Edge-socket connectors and board 2,54 mm (0,1 in) contact spacing single or double-sided of 1,6 (0,063 nominal thickness
5/15/1998 - PDF - English - BSI
Learn More€293.00 -
BS EN 60603-5:1998
Connectors for frequencies below 3 MHz use with printed boards Edge-socket connectors and two-part double-sided 2,54 mm (0,1 mm) spacing
5/15/1998 - PDF - English - BSI
Learn More€293.00 -
BS EN 60603-4:1998
Connectors for frequencies below 3 MHz use with printed boards Two-part connectors having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations that same spacing
5/15/1998 - PDF - English - BSI
Learn More€250.00 -
DIN EN 61076-3-101:1998-05
Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors; Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 × 2,54 mm centre-line (IEC 61076-3-101:1997); German version EN 61076-3-101:1997
5/1/1998 - PDF - German - DIN
Learn More€120.84 -
NF EN 50049-1, C92-250 (05/1998)
Domestic and similar electronic equipment interconnection requirements : peritelevision connector.
5/1/1998 - Paper - French - AFNOR
Learn More€103.00 -
DIN EN 60352-1:1998-04
Solderless connections - Part 1: Wrapped connections; general requirements, test methods and practical guidance (IEC 60352-1:1997); German version EN 60352-1:1997
4/1/1998 - PDF - German - DIN
Learn More€85.79 -
DIN EN 60603-6:1998-04
Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness (IEC 60603-6:1987); German version EN 60603-6:1998
4/1/1998 - PDF - German - DIN
Learn More€110.00 -
DIN EN 60512-19-3:1998-03
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests; section 3: Test 19c: Fluid resistance (IEC 60512-19-3:1997); German version EN 60512-19-3:1997
3/1/1998 - PDF - German - DIN
Learn More€39.35 -
IEC 60603-14:1998
IEC 60603-14:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment
2/26/1998 - PDF - English, French - IEC
Learn More€92.00 -
IEC 60130-17:1998
IEC 60130-17:1998 Connectors for frequencies below 3 MHz - Part 17: Detailspecification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries
2/12/1998 - PDF - English, French - IEC
Learn More€270.00 -
DIN EN 60512-1-3:1998-02
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination; Section 3: Test 1c: Electrical engagement length (IEC 60512-1-3:1997); German version EN 60512-1-3:1997
2/1/1998 - PDF - German - DIN
Learn More€32.34 -
DIN EN 60512-1-4:1998-02
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General; Section 4: Test 1d: Contact protection effectiveness (scoop-proof) (IEC 60512-1-4:1997); German version EN 60512-1-4:1997
2/1/1998 - PDF - German - DIN
Learn More€32.34 -
NF EN 61076-3-101, C93-403-101 (02/1998)
Connectors with assessed quality, for use in D.C. Low-frequency analogue and in digital high-speed data applications. Part 3 : rectangular connectors. Section 101 : detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line.
2/1/1998 - Paper - French - AFNOR
Learn More€170.00 -
NF EN 60352-6, C93-026 (02/1998)
Solderless connections. Part 6 : insulation piercing connections. General requirements, test methods and practical guidance.
2/1/1998 - Paper - French - AFNOR
Learn More€116.33 -
EIA/IS-753:1998
Two-Part High Density Blade and Backplane Tuning Fork Connector
2/1/1998 - PDF sécurisé - English - EIA
Learn More€222.60 -
BS EN 60512-19-3:1998
Connectors for electronic equipment. Tests and measurements. Chemical resistance tests Fluid
1/15/1998 - PDF - English - BSI
Learn More€151.00 -
EIA-540H000:1998
Sectional Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment
1/1/1998 - PDF sécurisé - English - EIA
Learn More€81.90 -
BS EN 60512-1-3:1997
Connectors for electronic equipment. Tests and measurements. General Test 1c. Electrical engagement length
12/15/1997 - PDF - English - BSI
Learn More€151.00 -
EIA-700A0AD:1997
Detail Specification for the Interface of the 1.27 mm Pitch, Ribbon Contact (Leaf Spring), Trapezoidal Shaped, Self-Locking I/O Connector
11/1/1997 - PDF sécurisé - English - EIA
Learn More€109.20 -
IEC 60512-14-7:1997
IEC 60512-14-7:1997 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water
10/30/1997 - PDF - English, French - IEC
Learn More€12.00 -
UNE-EN 175300:1997
SECTIONAL SPECIFICATION: RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ.
10/23/1997 - PDF - Spanish - AENOR
Learn More€82.00 -
UNE-EN 175300:1997
SECTIONAL SPECIFICATION: RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ.
10/23/1997 - PDF - English - AENOR
Learn More€98.40 -
BS EN 61076-4-102:1997
Connectors with assessed quality, for use in d.c., low-frequency analogue and digital high speed data applications. Printed board connectors Detail specification two-part single-pole connectors, multiple uses on plug-in units, pre-centring, coding early mating features, having a metric grid accordance IEC 60917
10/15/1997 - PDF - English - BSI
Learn More€293.00 -
DIN EN 61076-4-102:1997-10
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 (IEC 61076-4-102:1997); German version EN 61076-4-102:1997
10/1/1997 - PDF - German - DIN
Learn More€104.95 -
IEC 60512-6-5:1997
IEC 60512-6-5:1997 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration
10/1/1997 - PDF - English, French - IEC
Learn More€23.00 -
UNE-EN 60118-12:1997
HEARING AIDS. PART 12: DIMENSIONS OF ELECTRICAL CONNECTOR SYSTEMS.
9/24/1997 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 60118-12:1997
HEARING AIDS. PART 12: DIMENSIONS OF ELECTRICAL CONNECTOR SYSTEMS.
9/24/1997 - PDF - English - AENOR
Learn More€81.60 -
€180.00
-
IEC 61076-3-101:1997
IEC 61076-3-101:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line
9/5/1997 - PDF - English, French - IEC
Learn More€397.00 -
BS EN 175500:1997
Harmonized system of quality assessment for electronic components. Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval
8/15/1997 - PDF - English - BSI
Learn More€293.00 -
IEC 60512-1-4:1997
IEC 60512-1-4:1997 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)
7/30/1997 - PDF - English, French - IEC
Learn More€23.00 -
UNE-EN 60512-12-6:1997
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 12: SOLDERING TESTS. SECTION 6: TEST 12F: SEALING AGAINST FLUX AND CLEANING SOLVENTS IN MACHINE SOLDERING.
7/15/1997 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN 60512-12-6:1997
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 12: SOLDERING TESTS. SECTION 6: TEST 12F: SEALING AGAINST FLUX AND CLEANING SOLVENTS IN MACHINE SOLDERING.
7/15/1997 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN 60512-15-8:1997
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 15: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS. SECTION 8: TEST 15H. CONTACT RETENTION SYSTEM RESISTANCE TO TOOL APPLICATION.
7/15/1997 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60512-15-8:1997
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 15: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS. SECTION 8: TEST 15H. CONTACT RETENTION SYSTEM RESISTANCE TO TOOL APPLICATION.
7/15/1997 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 61076-4:1997
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 4: SECTIONAL SPECIFICATIONS. PRINTED BOARD CONNECTORS.
7/15/1997 - PDF - Spanish - AENOR
Learn More€68.00