31.220 : Electromechanical components for electronic and telecommunications equipment
-
EIA-364-112:2010 (R2021)
TP-112 CONTACT RESISTANCE AND CURRENT RATING OF PARALLEL CIRCUITS TEST PROCEDURE FOR ELECTRICAL CONNECTORS, CONTACTS AND SOCKETS
1/1/2010 - PDF sécurisé - English - EIA
Learn More€88.20 -
UNE-EN 61076-3-114:2009
Connectors for electronic equipment - Product requirements -- Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type (Endorsed by AENOR in December of 2009.)
12/1/2009 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN 61076-3-117:2009
Connectors for electronic equipment - Product requirements -- Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push pull coupling (Endorsed by AENOR in December of 2009.)
12/1/2009 - PDF - English - AENOR
Learn More€64.00 -
UNE-IEC 60050-581:2009 (R2015)
International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
11/4/2009 - PDF - Spanish - AENOR
Learn More€126.00 -
DIN EN 61984 VDE 0627:2009-11
Connectors - Safety requirements and tests (IEC 61984:2008), German version EN 61984:2009
11/1/2009 - Paper - German - VDE
Learn More€116.31 -
NF EN 61076-3-117, C93-406-3-117 (10/2009)
Connectors for electronic equipment - Product requirements - Part 3-117 : rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push pull coupling - Connecteurs pour équipements électroniques
10/1/2009 - Paper - French - AFNOR
Learn More€103.00 -
BS EN 61076-3-114:2009
Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for.protective housings use with 8-way shielded and unshielded connectors frequencies up to 600 MHz industrial environments incorporating the IEC 60603-7 series interface. Variant 11 related 61076-3-106. Bayonet coupling type
9/30/2009 - PDF - English - BSI
Learn More€250.00 -
BS EN 61076-3-117:2009
Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification protective housings use with 8-way shielded and unshielded connectors industrial environments incorporating the IEC 60603-7 series interface. Variant 14 related to 61076-3-106. Push-pull coupling
9/30/2009 - PDF - English - BSI
Learn More€180.00 -
DD IEC/PAS 61076-2-108:2009
Connectors for electronic equipment. Product requirements Circular connectors. Detail specification glass to metal seal style M12 connectors with screw-locking intended mate conforming IEC 61076-2-101
8/31/2009 - PDF - English - BSI
Learn More€180.00 -
DIN EN 60512-25-9:2009-08
Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk (IEC 60512-25-9:2008), German version EN 60512-25-9:2008
8/1/2009 - PDF - German - DIN
Learn More€92.62 -
DIN EN 61076-3:2009-07
Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification (IEC 61076-3:2008), German version EN 61076-3:2008.
7/1/2009 - PDF - German - DIN
Learn More€99.35 -
DIN EN 61076-3-116:2009-07
Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever (IEC 61076-3-116:2008), German version EN 61076-3-116:2008
7/1/2009 - PDF - German - DIN
Learn More€99.35 -
DIN EN 61076-3-001:2009-07
Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification (IEC 61076-3-001:2008), German version EN 61076-3-001:2008.
7/1/2009 - PDF - German - DIN
Learn More€184.58 -
IEC 61076-3-115:2009
IEC 61076-3-115:2009 Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type
6/17/2009 - PDF - English, French - IEC
Learn More€173.00 -
DIN EN 61076-2-105:2009-05
Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking (IEC 61076-2-105:2008), German version EN 61076-2-105:2008
5/1/2009 - PDF - German - DIN
Learn More€110.00 -
IEC 61076-3-117:2009
IEC 61076-3-117:2009 Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push-pull coupling
4/29/2009 - PDF - English, French - IEC
Learn More€132.00 -
IEC 61076-3-114:2009
IEC 61076-3-114:2009 Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type
4/29/2009 - PDF - English, French - IEC
Learn More€173.00 -
BS EN 60512-25-9:2008
Connectors for electronic equipment. Tests and measurements Signal integrity tests. Test 25i. Alien crosstalk
3/31/2009 - PDF - English - BSI
Learn More€180.00 -
BS EN 60512-16-5:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16e. Gauge retention force (resilient contacts)
3/31/2009 - PDF - English - BSI
Learn More€151.00 -
BS EN 61076-3-116:2008
Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification protective housings use with 8-way shielded and unshielded connectors frequencies up to 600 MHz industrial environments incorporating the IEC 60603-7 series interface. Variant 13 related 61076-3-106. Locking lever
3/31/2009 - PDF - English - BSI
Learn More€250.00 -
BS EN 61076-2-105:2008
Connectors for electronic equipment. Product requirements Circular connectors. Detail specification M5 connectors with screw-locking
3/31/2009 - PDF - English - BSI
Learn More€293.00 -
€25.00
-
JIS C 5630-3:2009 (R2013)
Semiconductor devices - Micro-electromechanical devices - Part 3: Thin film standard test piece for tensile testing
3/20/2009 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 5630-2:2009 (R2013)
Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials
3/20/2009 - PDF - Japanese - JSA
Learn More€25.00 -
DIN EN 60512-15-1:2009-03
Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert (IEC 60512-15-1:2008), German version EN 60512-15-1:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-15-3:2009-03
Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) (IEC 60512-15-3:2008), German version EN 60512-15-3:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-15-5:2009-03
Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation (IEC 60512-15-5:2008), German version EN 60512-15-5:2008.
3/1/2009 - PDF - German - DIN
Learn More€59.63 -
DIN EN 60512-15-4:2009-03
Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force (IEC 60512-15-4:2008), German version EN 60512-15-4:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-15-6:2009-03
Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices (IEC 60512-15-6:2008), German version EN 60512-15-6:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-15-7:2009-03
Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment (IEC 60512-15-7:2008), German version EN 60512-15-7:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-16-1:2009-03
Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage (IEC 60512-16-1:2008), German version EN 60512-16-1:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-16-2:2009-03
Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry (IEC 60512-16-2:2008), German version EN 60512-16-2:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-16-4:2009-03
Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) (IEC 60512-16-4:2008), German version EN 60512-16-4:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-16-5:2009-03
Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (IEC 60512-16-5:2008), German version EN 60512-16-5:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-16-6:2009-03
Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations (IEC 60512-16-6:2008), German version EN 60512-16-6:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-16-8:2009-03
Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections) (IEC 60512-16-8:2008), German version EN 60512-16-8:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-16-13:2009-03
Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections (IEC 60512-16-13:2008), German version EN 60512-16-13:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-16-3:2009-03
Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008), German version EN 60512-16-3:2008.
3/1/2009 - PDF - German - DIN
Learn More€59.63 -
DIN EN 60512-16-7:2009-03
Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (IEC 60512-16-7:2008), German version EN 60512-16-7:2008.
3/1/2009 - PDF - German - DIN
Learn More€59.63 -
DIN EN 60512-16-9:2009-03
Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force (IEC 60512-16-9:2008), German version EN 60512-16-9:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-16-11:2009-03
Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections (IEC 60512-16-11:2008), German version EN 60512-16-11:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-16-14:2009-03
Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs (IEC 60512-16-14:2008), German version EN 60512-16-14:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-16-16:2009-03
Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs (IEC 60512-16-16:2008), German version EN 60512-16-16:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
DIN EN 60512-16-17:2009-03
Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs (IEC 60512-16-17:2008), German version EN 60512-16-17:2008.
3/1/2009 - PDF - German - DIN
Learn More€59.63 -
DIN EN 60512-16-18:2009-03
Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation (IEC 60512-16-18:2008), German version EN 60512-16-18:2008.
3/1/2009 - PDF - German - DIN
Learn More€52.90 -
UNE-EN 61076-3-116:2008
Connectors for electronic equipment - Product requirements -- Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English - AENOR
Learn More€66.00 -
UNE-EN 60512-25-9:2008
Connectors for electronic equipment - Tests and measurements -- Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English - AENOR
Learn More€64.00 -
BS EN 61076-3-001:2008
Connectors for electronic equipment. Product requirements Rectangular connectors. Blank detail specification
2/28/2009 - PDF - English - BSI
Learn More€377.00 -
UNE-EN 60512-16-3:2008
Connectors for electronic equipment - Tests and measurements -- Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (Endorsed by AENOR in February of 2009.)
2/1/2009 - PDF - English - AENOR
Learn More€35.00 -
UNE-EN 60512-16-5:2008
Connectors for electronic equipment - Tests and measurements -- Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (Endorsed by AENOR in February of 2009.)
2/1/2009 - PDF - English - AENOR
Learn More€24.00 -
UNE-EN 60512-16-6:2008
Connectors for electronic equipment - Tests and measurements -- Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations (Endorsed by AENOR in February of 2009.)
2/1/2009 - PDF - English - AENOR
Learn More€24.00 -
UNE-EN 60512-16-7:2008
Connectors for electronic equipment - Tests and measurements -- Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (Endorsed by AENOR in February of 2009.)
2/1/2009 - PDF - English - AENOR
Learn More€35.00 -
UNE-EN 60512-16-14:2008
Connectors for electronic equipment - Tests and measurements -- Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs (Endorsed by AENOR in February of 2009.)
2/1/2009 - PDF - English - AENOR
Learn More€28.00 -
UNE-EN 60512-16-16:2008
Connectors for electronic equipment - Tests and measurements -- Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs (Endorsed by AENOR in February of 2009.)
2/1/2009 - PDF - English - AENOR
Learn More€28.00 -
UNE-EN 60512-16-17:2008
Connectors for electronic equipment - Tests and measurements -- Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs (Endorsed by AENOR in February of 2009.)
2/1/2009 - PDF - English - AENOR
Learn More€35.00 -
NF EN 60512-25-9, C93-400-25-9 (02/2009)
Connectors for electronic equipment - Tests and measurements - Part 25-9 : signal integrity tests - Test 25i : alien crosstalk - Connecteurs pour équipements électroniques
2/1/2009 - Paper - French - AFNOR
Learn More€103.33 -
UNE-EN 60512-26-100:2008
Connectors for electronic equipment - Tests and measurements -- Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (Endorsed by AENOR in February of 2009.)
2/1/2009 - PDF - English - AENOR
Learn More€92.00 -
UNE-EN 61076-3-001:2008
Connectors for electronic equipment - Product requirements -- Part 3-001: Rectangular connectors - Blank detail specification (Endorsed by AENOR in February of 2009.)
2/1/2009 - PDF - English - AENOR
Learn More€113.00 -
UNE-EN 61076-3:2008
Connectors for electronic equipment - Product requirements -- Part 3: Rectangular connectors - Sectional specification (Endorsed by AENOR in February of 2009.)
2/1/2009 - PDF - English - AENOR
Learn More€66.00 -
BS EN 60512-16-3:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16c. Contact-bending strength
1/31/2009 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-16-6:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16f. Robustness of terminations
1/31/2009 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-16-7:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16g. Measurement of contact deformation after crimping
1/31/2009 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-16-14:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16n. Bending strength, fixed male tabs
1/31/2009 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-16-16:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16p. Torsional strength, fixed male tabs
1/31/2009 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-16-17:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16q. Tensile compressive strength, fixed male tabs
1/31/2009 - PDF - English - BSI
Learn More€151.00 -
VG 95351-4:2009-01
Electrical connectors and plug-and-socket devices - Connectors with bayonet coupling, butting contact, 7pole - Part 4: Mating dimensions, detail specification, text in German and English
1/1/2009 - PDF - English, German - DIN
Learn More€45.98 -
NF EN 60512-16-16, C93-400-16-16 (01/2009)
Connectors for electronic equipment - Tests and measurements - Part 16-16 : mechanical tests on contacts and terminations - Test 16p : Torsional strength, fixed male tabs - Connecteurs pour équipements électroniques
1/1/2009 - Paper - French - AFNOR
Learn More€54.50 -
NF EN 61076-3-116, C93-406-3-116 (01/2009)
Connectors for electronic equipment - Product requirements - Part 3-116 : rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever - Connecteurs pour équipements électroniques
1/1/2009 - Paper - French - AFNOR
Learn More€103.00 -
UNE-EN 61076-2-105:2008
Connectors for electronic equipment - Product requirements -- Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking (Endorsed by AENOR in January of 2009.)
1/1/2009 - PDF - English - AENOR
Learn More€72.00 -
NF EN 60512-15-1, C93-400-15-1 (12/2008)
Connectors for electronic equipment - Tests and measurements - Part 15-1 : connector tests (mechanical) - Test 15a : contact retention in insert - Connecteurs pour équipements électroniques
12/1/2008 - Paper - French - AFNOR
Learn More€54.50 -
NF EN 60512-15-4, C93-400-15-4 (12/2008)
Connectors for electronic equipment - Tests and measurements - Part 15-4 : connector tests (mechanical) - Test 15d : contact insertion, release and extraction force - Connecteurs pour équipements électroniques
12/1/2008 - Paper - French - AFNOR
Learn More€54.67 -
NF EN 60512-15-5, C93-400-15-5 (12/2008)
Connectors for electronic equipment - Tests and measurements - Part 15-5 : connector tests (mechanical) - Test 15e : contact retention in insert, cable nutation - Connecteurs pour équipements électroniques
12/1/2008 - Paper - French - AFNOR
Learn More€72.00 -
NF EN 60512-15-6, C93-400-15-6 (12/2008)
Connectors for electronic equipment - Tests and measurements - Part 15-6 : connector tests (mechanical) - Test 15f : effectiveness of connector coupling devices - Connecteurs pour équipements électroniques
12/1/2008 - Paper - French - AFNOR
Learn More€54.50 -
NF EN 60512-15-7, C93-400-15-7 (12/2008)
Connectors for electronic equipment - Tests and measurements - Part 15-7 : connector tests (mechanical) - Test 15g : robustness of protective cover attachment - Connecteurs pour équipements électroniques
12/1/2008 - Paper - French - AFNOR
Learn More€54.50 -
NF EN 60512-16-4, C93-400-16-4 (12/2008)
Connectors for electronic equipment - Tests and measurements - Part 16-4 : mechanical tests on contacts and terminations - Test 16d : tensile strength (crimped connections) - Connecteurs pour équipements électroniques
12/1/2008 - Paper - French - AFNOR
Learn More€54.67 -
NF EN 60512-16-5, C93-400-16-5 (12/2008)
Connectors for electronic equipment - Tests and measurements - Part 16-5 : mechanical tests on contacts and terminations - Test 16e : gauge retention force (resilient contacts) - Connecteurs pour équipements électroniques
12/1/2008 - Paper - French - AFNOR
Learn More€54.50 -
NF EN 60512-16-9, C93-400-16-9 (12/2008)
Connectors for electronic equipment - Tests and measurements - Part 16-9 : mechanical tests on contacts and terminations - Test 16i : grounding contact spring holding force - Connecteurs pour équipements électroniques
12/1/2008 - Paper - French - AFNOR
Learn More€54.50 -
NF EN 60512-16-13, C93-400-16-13 (12/2008)
Connectors for electronic equipment - Tests and measurements - Part 16-13 : mechanical tests on contacts and terminations - Test 16m : un-wrapping, solderless wrapped connections - Connecteurs pour équipements électroniques
12/1/2008 - Paper - French - AFNOR
Learn More€72.00 -
NF EN 60512-16-18, C93-400-16-18 (12/2008)
Connectors for electronic equipment - Tests and measurements - Part 16-18 : mechanical tests on contacts and terminations - Test 16r : deflection of contacts, simulation - Connecteurs pour équipements électroniques
12/1/2008 - Paper - French - AFNOR
Learn More€54.50 -
UNE-EN 60512-15-1:2008
Connectors for electronic equipment - Tests and measurements -- Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert (Endorsed by AENOR in December of 2008.)
12/1/2008 - PDF - English - AENOR
Learn More€24.00 -
UNE-EN 60512-15-3:2008
Connectors for electronic equipment - Tests and measurements -- Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) (Endorsed by AENOR in December of 2008.)
12/1/2008 - PDF - English - AENOR
Learn More€28.00 -
UNE-EN 60512-15-4:2008
Connectors for electronic equipment - Tests and measurements -- Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force (Endorsed by AENOR in December of 2008.)
12/1/2008 - PDF - English - AENOR
Learn More€28.00 -
UNE-EN 60512-15-5:2008
Connectors for electronic equipment - Tests and measurements -- Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation (Endorsed by AENOR in December of 2008.)
12/1/2008 - PDF - English - AENOR
Learn More€35.00 -
UNE-EN 60512-15-6:2008
Connectors for electronic equipment - Tests and measurements -- Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices (Endorsed by AENOR in December of 2008.)
12/1/2008 - PDF - English - AENOR
Learn More€24.00 -
UNE-EN 60512-15-7:2008
Connectors for electronic equipment - Tests and measurements -- Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment (Endorsed by AENOR in December of 2008.)
12/1/2008 - PDF - English - AENOR
Learn More€24.00 -
NF EN 60512-16-6, C93-400-16-6 (12/2008)
Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-6 : essais mécaniques des contacts et des sorties - Essai 16f : robustesse des sorties
12/1/2008 - Paper - French - AFNOR
Learn More€54.67 -
NF EN 60512-16-11, C93-400-16-11 (12/2008)
Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-11 : essais mécaniques des contacts et des sorties - Essai 16k : force d'arrachement, connexions enroulées sans soudure
12/1/2008 - Paper - French - AFNOR
Learn More€54.67 -
NF EN 60512-16-7, C93-400-16-7 (12/2008)
Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-7 : essais mécaniques des contacts et des sorties - Essai 16g : mesure de la déformation d'un contact après sertissage
12/1/2008 - Paper - French - AFNOR
Learn More€72.00 -
UNE-EN 60512-16-1:2008
Connectors for electronic equipment - Tests and measurements -- Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage (Endorsed by AENOR in November of 2008.)
11/1/2008 - PDF - English - AENOR
Learn More€28.00 -
UNE-EN 60512-16-2:2008
Connectors for electronic equipment - Tests and measurements -- Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry (Endorsed by AENOR in November of 2008.)
11/1/2008 - PDF - English - AENOR
Learn More€24.00 -
UNE-EN 60512-16-4:2008
Connectors for electronic equipment - Tests and measurements -- Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) (Endorsed by AENOR in November of 2008.)
11/1/2008 - PDF - English - AENOR
Learn More€28.00 -
UNE-EN 60512-16-8:2008
Connectors for electronic equipment - Tests and measurements -- Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections) (Endorsed by AENOR in November of 2008.)
11/1/2008 - PDF - English - AENOR
Learn More€28.00 -
UNE-EN 60512-16-9:2008
Connectors for electronic equipment- Tests and measurements- Part 16-9: Mechanical tests on contacts and terminations- Test 16i:Grounding contact spring holding force (Endorsed by AENOR in November of 2008.)
11/1/2008 - PDF - English - AENOR
Learn More€24.00 -
UNE-EN 60512-16-11:2008
Connectors for electronic equipment - Tests and measurements -- Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections (Endorsed by AENOR in November of 2008.)
11/1/2008 - PDF - English - AENOR
Learn More€28.00 -
UNE-EN 60512-16-13:2008
Connectors for electronic equipment - Tests and measurements -- Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections (Endorsed by AENOR in November of 2008.)
11/1/2008 - PDF - English - AENOR
Learn More€24.00 -
UNE-EN 60512-16-18:2008
Connectors for electronic equipment - Tests and measurements -- Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation (Endorsed by AENOR in November of 2008.)
11/1/2008 - PDF - English - AENOR
Learn More€28.00 -
DIN EN 60512-13-2 Berichtigung 1:2008-11
Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces (IEC 60512-13-2:2006), German version EN 60512-13-2:2006, Corrigendum to DIN EN 60512-13-2:2006-11, German version CENELEC-Cor.:2006 to EN 60512-13-2:2006
11/1/2008 - PDF - German - DIN
Learn More€0.00 -
DIN EN 175101-809 Berichtigung 1:2008-11
Detail specification - Two-part connectors for printed boards having a grid of 2, 54 mm, short version in compliance with CECC 75101-801, with assessed quality, German version EN 175101-809:2004, Corrigendum to DIN EN 175101-809:2004-11, German version CENELEC-Cor.:2006 to EN 175101-809:2004
11/1/2008 - PDF - German - DIN
Learn More€0.00 -
DIN EN 60512-12-2 Berichtigung 1:2008-11
Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method (IEC 60512-12-2:2006), German version EN 60512-12-2:2006, Corrigendum to DIN EN 60512-12-2:2006-11, German version CENELEC-Cor.:2006 to EN 60512-12-2:2006
11/1/2008 - PDF - German - DIN
Learn More€0.00 -
DIN EN 60512-12-3 Berichtigung 1:2008-11
Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006), German version EN 60512-12-3:2006, Corrigendum to DIN EN 60512-12-3:2006-11, German version CENELEC-Cor.:2006 to EN 60512-12-3:2006
11/1/2008 - PDF - German - DIN
Learn More€0.00 -
DIN EN 60512-12-4 Berichtigung 1:2008-11
Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method (IEC 60512-12-4:2006), German version EN 60512-12-4:2006, Corrigendum to DIN EN 60512-12-4:2006-11, German version CENELEC-Cor.:2006 to EN 60512-12-4:2006
11/1/2008 - PDF - German - DIN
Learn More€0.00 -
DIN EN 60512-12-5 Berichtigung 1:2008-11
Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method (IEC 60512-12-5:2006), German version EN 60512-12-5:2006, Corrigendum to DIN EN 60512-12-5:2006-11, German version CENELEC-Cor.:2006 to EN 60512-12-5:2006
11/1/2008 - PDF - German - DIN
Learn More€0.00 -
DIN EN 60512-13-1 Berichtigung 1:2008-11
Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces (IEC 60512-13-1:2006), German version EN 60512-13-1:2006, Corrigendum to DIN EN 60512-13-1:2006-11, German version CENELEC-Cor.:2006 to EN 60512-13-1:2006
11/1/2008 - PDF - German - DIN
Learn More€0.00 -
DIN EN 60512-13-5 Berichtigung 1:2008-11
Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006), German version EN 60512-13-5:2006, Corrigendum to DIN EN 60512-13-5:2006-11, German version CENELEC-Cor.:2006 to EN 60512-13-5:2006
11/1/2008 - PDF - German - DIN
Learn More€0.00 -
IEC 61984:2008
IEC 61984:2008 Connectors - Safety requirements and tests
10/8/2008 - PDF - English, French - IEC
Learn More€311.00 -
BS EN 60512-15-1:2008
Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15a. Contact retention in insert
9/30/2008 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-15-3:2008
Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15c. Insert retention in housing (torsional)
9/30/2008 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-15-4:2008
Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15d. Contact insertion, release extraction force
9/30/2008 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-15-5:2008
Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15e. Contact retention in insert, cable nutation
9/30/2008 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-15-6:2008
Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15f. Effectiveness of connector coupling devices
9/30/2008 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-15-7:2008
Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15g. Robustness of protective cover attachment
9/30/2008 - PDF - English - BSI
Learn More€151.00 -
IEC 60050-581:2008
IEC 60050-581:2008 International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
9/19/2008 - PDF - English, French - IEC
Learn More€397.00 -
IEC 61076-3-116:2008
IEC 61076-3-116:2008 Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever
9/9/2008 - PDF - English, French - IEC
Learn More€173.00 -
BS EN 60512-16-1:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16a. Probe damage
8/29/2008 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-16-2:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16b. Restricted entry
8/29/2008 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-16-4:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16d. Tensile strength (crimped connections)
8/29/2008 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-16-8:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16h. Insulating grip effectiveness (crimped connections)
8/29/2008 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-16-9:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16i. Grounding contact spring holding force
8/29/2008 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-16-11:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16k. Stripping force, solderless wrapped connections
8/29/2008 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-16-13:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16m. Un-wrapping, solderless wrapped connections
8/29/2008 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-16-18:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16r. Deflection of contacts, simulation
8/29/2008 - PDF - English - BSI
Learn More€151.00 -
IEC 60512-25-9:2008
IEC 60512-25-9:2008 Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk
8/28/2008 - PDF - English, French - IEC
Learn More€132.00 -
IEC 61076-2-105:2008
IEC 61076-2-105:2008 Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking
7/25/2008 - PDF - English, French - IEC
Learn More€219.00 -
IEC 60512-26-100:2008
IEC 60512-26-100:2008 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
7/21/2008 - PDF - English, French - IEC
Learn More€345.00 -
IEC 60512-16-3:2008
IEC 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
7/21/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-16-5:2008
IEC 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
7/21/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-16-17:2008
IEC 60512-16-17:2008 Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs
7/21/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-16-16:2008
IEC 60512-16-16:2008 Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs
7/21/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-16-14:2008
IEC 60512-16-14:2008 Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs
7/21/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-16-7:2008
IEC 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
7/21/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-16-6:2008
IEC 60512-16-6:2008 Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations
7/21/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 61076-3:2008
IEC 61076-3:2008 Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification
7/9/2008 - PDF - English, French - IEC
Learn More€173.00 -
IEC 61076-3-001:2008
IEC 61076-3-001:2008 Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification
7/9/2008 - PDF - English, French - IEC
Learn More€397.00 -
IEC 60512-16-4:2008
IEC 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
6/11/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-16-2:2008
IEC 60512-16-2:2008 Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry
6/11/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-16-1:2008
IEC 60512-16-1:2008 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage
6/11/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-16-18:2008
IEC 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation
5/14/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-16-13:2008
IEC 60512-16-13:2008 Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections
5/14/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-16-11:2008
IEC 60512-16-11:2008 Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections
5/14/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-16-9:2008
IEC 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force
5/14/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-16-8:2008
IEC 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)
5/14/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-15-1:2008
IEC 60512-15-1:2008 Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert
5/9/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-15-3:2008
IEC 60512-15-3:2008 Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)
5/9/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-15-4:2008
IEC 60512-15-4:2008 Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force
5/9/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-15-5:2008
IEC 60512-15-5:2008 Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation
5/9/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-15-6:2008
IEC 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
5/9/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60512-15-7:2008
IEC 60512-15-7:2008 Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment
5/9/2008 - PDF - English, French - IEC
Learn More€23.00 -
UNE-EN 60352-2:2006
Solderless connections -- Part 2: Crimped connections - General requirements, test methods and practical guidance (Endorsed by AENOR in May of 2008.)
5/1/2008 - PDF - English - AENOR
Learn More€94.00 -
UNE-EN 61076-1:2006
Connectors for electronic equipment - Product requirements -- Part 1: Generic specification (Endorsed by AENOR in May of 2008.)
5/1/2008 - PDF - English - AENOR
Learn More€80.00 -
UNE-EN 62197-1:2006
Connectors for electronic equipment - Quality assessment requirements -- Part 1: Generic specification (Endorsed by AENOR in May of 2008.)
5/1/2008 - PDF - English - AENOR
Learn More€72.00 -
BS EN 61076-4-101:2001
Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification two-part connector modules, having a basic grid of 2,0 mm printed boards and backplanes in accordance IEC 60917
4/30/2008 - PDF - English - BSI
Learn More€398.00 -
BS EN 60512-13-1:2006
Connectors for electronic equipment. Tests and measurements Mechanical operation tests. Test 13a: Engaging separating forces
1/31/2008 - PDF - English - BSI
Learn More€151.00 -
€60.00
-
BS EN 61076-7-100:2006
Connectors for electronic equipment. Product requirements Cable outlet accessories. Detail specification a metric cable sealing consisting of an integrated part heavy-duty rectangular or circular connector hoods and system
12/31/2007 - PDF - English - BSI
Learn More€180.00 -
BS EN 60512-13-5:2006
Connectors for electronic equipment. Tests and measurements Mechanical operation tests. Test 13e. Polarizing keying method
12/31/2007 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-13-2:2006
Connectors for electronic equipment. Tests and measurements Mechanical operation tests. Test 13b. Insertion withdrawal forces
12/31/2007 - PDF - English - BSI
Learn More€151.00 -
DIN EN 175301-801:2007-08
Detail Specification: High density rectangular connectors, round removable crimp contacts; German version EN 175301-801:2006
8/1/2007 - PDF - German - DIN
Learn More€110.00 -
DIN EN 61076-3-106:2007-07
Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface (IEC 61076-3-106:2006); German version EN 61076-3-106:2006
7/1/2007 - PDF - German - DIN
Learn More€131.96 -
UNE-EN 61169-2:2007
Radio-frequency connectors -- Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 (IEC 61169-2:2007). (Endorsed by AENOR in July of 2007.)
7/1/2007 - PDF - English - AENOR
Learn More€65.00 -
BS EN 61169-2:2007
Radio-frequency connectors Sectional specification. Radio frequency coaxial of type 9,52
5/31/2007 - PDF - English - BSI
Learn More€250.00 -
UNE-EN 60512-13-1:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces
5/9/2007 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 60512-13-1:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces
5/9/2007 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN 60512-13-2:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces
5/9/2007 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 60512-13-2:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces
5/9/2007 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN 60512-13-5:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method
5/9/2007 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 60512-13-5:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method
5/9/2007 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN 60669-2-3:2007
Switches for household and similar fixed electrical installations -- Part 2-3: Particular requirements - Time delay switches (TDS) (IEC 60669-2-3:2006).
5/9/2007 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 60669-2-3:2007
Switches for household and similar fixed electrical installations -- Part 2-3: Particular requirements - Time delay switches (TDS) (IEC 60669-2-3:2006).
5/9/2007 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 60512-12-2:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method
4/25/2007 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 60512-12-2:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method
4/25/2007 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN 60512-12-3:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
4/25/2007 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 60512-12-3:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
4/25/2007 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN 60512-12-4:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method
4/25/2007 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 60512-12-4:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method
4/25/2007 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN 60512-12-5:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
4/25/2007 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 60512-12-5:2006 CORR:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
4/25/2007 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN 61076-3-106:2006
Connectors for electronic equipment - Product requirements -- Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface (Endorsed by AENOR in April of 2007.)
4/1/2007 - PDF - English - AENOR
Learn More€87.00 -
BS EN 60512-12-2:2006
Connectors for electronic equipment. Tests and measurements Soldering tests. Test 12b. Solderability, wetting, soldering iron method
3/30/2007 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-12-5:2006
Connectors for electronic equipment. Tests and measurements Soldering tests. Test 12e. Resistance to soldering heat, iron method
3/30/2007 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-12-3:2006
Connectors for electronic equipment. Tests and measurements Soldering tests Solderability, de-wetting
3/30/2007 - PDF - English - BSI
Learn More€151.00 -
BS EN 60512-12-4:2006
Connectors for electronic equipment. Tests and measurements Soldering tests. Test 12d. Resistance to soldering heat, solder bath method
3/12/2007 - PDF - English - BSI
Learn More€151.00 -
DIN EN 175301-803:2007-03
Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable; German version EN 175301-803:2006
3/1/2007 - PDF - German - DIN
Learn More€104.95 -
UNE-EN 175301-801:2006
Detail Specification: High density rectangular connectors, round removable crimp contacts (Endorsed by AENOR in March of 2007.)
3/1/2007 - PDF - English - AENOR
Learn More€76.00 -
IEC 61169-2:2007
IEC 61169-2:2007 Radio-frenquency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52
2/16/2007 - PDF - English, French - IEC
Learn More€132.00 -
IEC 61169-2:2007
IEC 61169-2:2007 Radio-frenquency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52
2/16/2007 - PDF - English - IEC
Learn More€132.00 -
UNE-EN 60512-12-1:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method (IEC 60512-12-1:2006).
2/7/2007 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN 60512-12-1:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method (IEC 60512-12-1:2006).
2/7/2007 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN 60512-14-2:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006).
2/7/2007 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN 60512-14-2:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006).
2/7/2007 - PDF - English - AENOR
Learn More€58.80 -
UNE-EN 60512-14-4:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006).
2/7/2007 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 60512-14-4:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006).
2/7/2007 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN 60512-14-5:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006).
2/7/2007 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN 60512-14-5:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006).
2/7/2007 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN 60512-14-6:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006).
2/7/2007 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN 60512-14-6:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006).
2/7/2007 - PDF - English - AENOR
Learn More€55.20 -
DIN EN 62047-2:2007-02
Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials (IEC 62047-2:2006); German version EN 62047-2:2006
2/1/2007 - PDF - German - DIN
Learn More€59.63 -
DIN EN 62047-3:2007-02
Semiconductor devices - Micro-electromechanical devices - Part 3: Thin film standard test piece for tensile-testing (IEC 62047-3:2006); German version EN 62047-3:2006
2/1/2007 - PDF - German - DIN
Learn More€52.90 -
DIN EN 62197-1:2007-02
Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification (IEC 62197-1:2006); German version EN 62197-1:2006
2/1/2007 - PDF - German - DIN
Learn More€104.95 -
DIN EN 61076-7-100:2007-02
Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system (IEC 61076-7-100:2006); German version EN 61076-7-100:2006
2/1/2007 - PDF - German - DIN
Learn More€85.79 -
DIN EN 61076-3-112:2007-02
Connectors for electronic equipment - Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/video equipment (IEC 61076-3-112:2006); German version EN 61076-3-112:2006
2/1/2007 - PDF - German - DIN
Learn More€104.95