Page 2 | 31.220 : Electromechanical components for electronic and telecommunications equipment 31 : Electronics ICS

IEC 60512-9-5:2020

IEC 60512-9-5:2020 Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic
6/9/2020 - PDF - English, French -
Learn More

€46.00

BS EN IEC 61076-8-101:2020

Connectors for electrical and electronic equipment. Product requirements Power connectors. Detail specification 2-pole or 3-pole power plus signal shielded sealed connectors with plastic housing rated current of 40 A
6/8/2020 - PDF - English -
Learn More

€331.00

BS EN IEC 61076-8-102:2020

Connectors for electrical and electronic equipment. Product requirements Power connectors. Detail specification 2-pole or 3-pole power plus signal shielded sealed connectors with plastic housing rated current of 150 A
6/8/2020 - PDF - English -
Learn More

€331.00

BS EN IEC 61076-8-100:2020

Connectors for electrical and electronic equipment. Product requirements Power connectors. Detail specification 2-pole or 3-pole power plus signal shielded sealed connectors with plastic housing rated current of 20 A
6/5/2020 - PDF - English -
Learn More

€331.00

BS EN IEC 63171-1:2020

Connectors for electrical and electronic equipment Detail specification two-way, shielded or unshielded, free fixed connectors. Mechanical mating information, pin assignment additional requirements Type 1 copper LC style
6/5/2020 - PDF - English -
Learn More

€293.00

VG 95345-24:2020-06

Electrical and electronic circuit breakers - Part 24: Residual current operated circuit-breakers with integral overcurrent protection (RCBO), Type B, 16 A and 32 A rated current, release characteristic B and C, three-pole + N with galvanic disconnection, detail standard, Text in German and English.
6/1/2020 - PDF - English, German -
Learn More

€110.00

VG 95318-15:2020-06

Electrical switches for low frequency application - Part 15: 8-steps circuit rotary switch, dimensions, masses, detail standard, Text in German and English.
6/1/2020 - PDF - English, German -
Learn More

€92.62

UNE-EN IEC 61076-3-124:2019/AC:2020-04

Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz (Endorsed by Asociación Española de Normalización in June of 2020.)
6/1/2020 - PDF - English -
Learn More

€0.00

BS EN IEC 61076-3-124:2019

Connectors for electrical and electronic equipment. Product requirements Rectangular connectors. Detail specification 10-way, shielded, free fixed connectors I/O data transmission with frequencies up to 500 MHz
5/6/2020 - PDF - English -
Learn More

€331.00

NF EN IEC 61076-8-102, C93-406-8-102 (05/2020)

Connectors for electrical and electronic equipment - Product requirements - Part 8-102 : power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A - Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 8-102 : connecteurs électriques - Spécification particulière pour connecteurs blindés étanches à 2 ou 3 pôles pour la transmission de puissance et à 2 pôles pour la transmission de données avec boîtier
5/1/2020 - Paper - French -
Learn More

€141.33

NF EN IEC 60352-3, C93-024-3 (05/2020)

Solderless connections - Part 3 : accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance - Connexions sans soudure - Partie 3 : Connexions autodénudantes accessibles sans soudure - Règles générales, méthodes d'essai et guide pratique
5/1/2020 - Paper - French -
Learn More

€127.67

NF EN 61076-8-100, C93-406-8-100 (05/2020)

Connectors for electrical and electronic equipment - Product requirements - Part 8-100 : power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A - Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 8-100 : Connecteurs électriques - Spécification particulière pour connecteurs blindés étanches à 2 ou 3 pôles pour la transmission de puissance et à 2 pôles pour la transmission de données avec boîtier
5/1/2020 - Paper - French -
Learn More

€141.33

NF EN IEC 63171-1, C93-408-1 (05/2020)

Connectors for electrical and electronic equipment - Part 1 : detail specification for two-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 copper LC style - Connecteurs pour composants éléctriques et électroniques - Exigences de produit - Partie 1 : Spécification particulière pour les fiches et les embases bidirectionnelles, écrantées ou non écrantées : informations sur l'accouplement mécanique, brochage et exigences supplémentaires pour connecteur LC
5/1/2020 - Paper - French -
Learn More

€127.67

NF EN 61076-8-101, C93-406-8-101 (05/2020)

Connectors for electrical and electronic equipment - Product requirements - Part 8-101 : power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A - Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 8-101 : connecteurs électriques - Spécification particulière pour connecteurs blindés étanches à 2 ou 3 pôles pour la transmission de puissance et à 2 pôles pour la transmission de données avec boîtier
5/1/2020 - Paper - French -
Learn More

€141.33

IEC 61076-8-102:2020

IEC 61076-8-102:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A
4/16/2020 - PDF - English, French -
Learn More

€270.00

IEC 61076-8-101:2020

IEC 61076-8-101:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A
4/9/2020 - PDF - English, French -
Learn More

€270.00

IEC 61076-8-100:2020

IEC 61076-8-100:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A
4/9/2020 - PDF - English, French -
Learn More

€270.00

BS EN IEC 63171-6:2020

Connectors for electrical and electronic equipment Detail specification 2-way 4-way (data/power), shielded, free fixed connectors power data transmission with frequencies up to 600 MHz
4/1/2020 - PDF - English -
Learn More

€348.00

DIN EN IEC 61020-1:2020-03

Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification (IEC 61020-1:2019), German version EN IEC 61020-1:2019.
3/1/2020 - PDF - German -
Learn More

€246.73

BS EN IEC 60512-15-2:2018 + Redline

Tracked Changes. Connectors for electrical and electronic equipment. Tests measurements Connector tests (mechanical). Test 15b: Insert retention in housing (axial)
2/27/2020 - PDF - English -
Learn More

€197.00

BS EN IEC 60512-8-3:2018 + Redline

Tracked Changes. Connectors for electrical and electronic equipment. Tests measurements Static load tests (fixed connectors). Test 8c: Robustness of actuating lever
2/27/2020 - PDF - English -
Learn More

€235.00

BS EN IEC 60512-1:2018 + Redline

Tracked Changes. Connectors for electrical and electronic equipment. Tests measurements Generic specification
2/27/2020 - PDF - English -
Learn More

€235.00

BS EN IEC 61020-1:2019 + Redline

Tracked Changes. Electromechanical switches for use in electrical and electronic equipment Generic specification
2/24/2020 - PDF - English -
Learn More

€492.00

BS EN IEC 60512-23-3:2019 + Redline

Tracked Changes. Connectors for electrical and electronic equipment. Tests measurements Screening filtering tests. Test 23c: Shielding effectiveness of connectors accessories. Line injection method
2/24/2020 - PDF - English -
Learn More

€235.00

UNE-EN IEC 60512-28-100:2019

Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g (Endorsed by Asociación Española de Normalización in February of 2020.)
2/1/2020 - PDF - English -
Learn More

€88.00

BS EN IEC 60512-28-100:2019

Connectors for electrical and electronic equipment. Tests measurements Signal integrity tests up to 2 000 MHz. 28a 28g
1/13/2020 - PDF - English -
Learn More

€348.00

VITA 46.31-2020-VDSTU

VPX: Higher Data Rate VPX, Solder Tail
1/1/2020 - PDF - English -
Learn More

€60.00

ANSI/VITA 46.30-2020

VPX: Higher Data Rate
1/1/2020 - PDF - English -
Learn More

€60.00

UNE-EN IEC 61169-24:2019

Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 O cable networks (type F)
12/11/2019 - PDF - Spanish -
Learn More

€73.00

UNE-EN IEC 61169-24:2019

Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 O cable networks (type F)
12/11/2019 - PDF - English -
Learn More

€87.60

DIN EN IEC 61076-3-106:2019-12

Connectors for electrical and electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface (IEC 48B/2727/CD:2019), Text in German and English
12/1/2019 - PDF - English, German -
Learn More

€152.71

NF EN IEC 60512-28-100, C93-400-28-100 (12/2019)

Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100 : signal integrity tests up to 2 000 MHz - Tests 28a to 28g
12/1/2019 - Paper - French -
Learn More

€141.00

UNE-EN IEC 61076-3-123:2019

Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking (Endorsed by Asociación Española de Normalización in December of 2019.)
12/1/2019 - PDF - English -
Learn More

€89.00

VG 95319-102:2019-12

Electrical connectors and plug-and-socket devices - Part 102: Expanded beam free connector and fixed connector, based on MIL-DTL-83526, detail standard, Text in German and English
12/1/2019 - PDF - English, German -
Learn More

€79.72

BS EN IEC 61076-3-123:2019

Connectors for electrical and electronic equipment. Product requirements Rectangular connectors. Detail specification hybrid connectors industrial environments, power supply fibre optic data transmission, with push-pull locking
11/18/2019 - PDF - English -
Learn More

€348.00

IEC 60512-28-100:2019 + Redline

IEC 60512-28-100:2019 (Redline version) Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g
11/15/2019 - PDF - English -
Learn More

€404.00

IEC 60512-28-100:2019

IEC 60512-28-100:2019 Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g
11/15/2019 - PDF - English, French -
Learn More

€311.00

19/30390161 DC:2019

BS EN IEC 61076-8-106. Connectors for Electrical and Electronic Equipment. Product Requirements Part 8-106. Power connectors. Detail specification 2 pole push-pull snap locking rectangular connectors with fuses, rated voltage of 400 V DC current 16 A
11/1/2019 - PDF - English -
Learn More

€24.00

NF EN IEC 61076-3-123, C93-406-3-123 (11/2019)

Connectors for electrical and electronic equipment - Product requirements - Part 3-123 : rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking - Connecteurs pour équipements électroniques - Exigences de produit - Partie 3-123 : Connecteurs rectangulaires - Spécification particulière relative aux connecteurs hybrides dans des environnements industriels pour l'alimentation et la transmission de données fibronique, avec verrouillage de type
11/1/2019 - Paper - French -
Learn More

€153.50

19/30371696 DC:2019

BS IEC 61076-3-126. Connectors for electrical and electronic equipment. Product requirements Part 3-126. Rectangular connectors. Detail specification 5way power connector industrial environments with push-pull locking
11/1/2019 - PDF - English -
Learn More

€24.00

BS EN IEC 61169-24:2019

Radio-frequency connectors Sectional specification. Radio frequency coaxial with screw coupling, typically for use in 75 O cable networks (type F)
10/7/2019 - PDF - English -
Learn More

€250.00

DIN EN 61076-1:2019-10

Connectors for electronic equipment - Product requirements - Part 1: Generic specification (IEC 61076-1:2006 + A1:2019), German version EN 61076-1:2006 + A1:2019.
10/1/2019 - PDF - German -
Learn More

€110.00

IEC 61076-3-123:2019

IEC 61076-3-123:2019 Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking
9/13/2019 - PDF - English, French -
Learn More

€311.00

IEEE 1505.1:2019

IEEE Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505
8/20/2019 - Paper - English -
Learn More

€255.00

IEEE 1505.1:2019

IEEE Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505
8/20/2019 - PDF - English -
Learn More

€152.00

IEEE 1505.1:2019 Redline

IEEE Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505
8/20/2019 - PDF - English -
Learn More

€208.00

19/30401223 DC:2019

BS EN IEC 61755-3-1. Fibre optic interconnecting devices and passive components. Connector optical interfaces Part 3-1. parameters of dispersion unshifted single mode physically contacting fibres. non-angled 2,5 mm 1,25 diameter cylindrical full zirconia ferrules, core location variant 1
8/12/2019 - PDF - English -
Learn More

€24.00

19/30400867 DC:2019

BS EN IEC 61755-3-11. Fibre optic interconnecting devices and passive components. Connector optical interfaces Part 3-11. parameters of dispersion unshifted single mode physically contacting fibres. Non-angled 2,5 mm 1,25 diameter cylindrical full zirconia ferrules, core location variant 3
8/6/2019 - PDF - English -
Learn More

€24.00

DIN EN IEC 63171-4:2019-08

Connectors for electrical and electronic equipment - Part 4: Detail specification for 2-way, shielded or unshielded, free and fixed connectors: mechanical mating information, pin assignment and additional requirements for type 4 (IEC 48B/2724/CD:2019), Text in German and English
8/1/2019 - PDF - English, German -
Learn More

€99.35

UNE-EN IEC 60512-11-1:2019

Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence (Endorsed by Asociación Española de Normalización in August of 2019.)
8/1/2019 - PDF - English -
Learn More

€63.00

IEC 61169-24:2019 + Redline

IEC 61169-24:2019 (Redline version) Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 O cable networks (type F)
7/19/2019 - PDF - English -
Learn More

€284.00

IEC 61169-24:2019

IEC 61169-24:2019 Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 O cable networks (type F)
7/19/2019 - PDF - English, French -
Learn More

€219.00

BS EN IEC 60512-11-1:2019

Connectors for electrical and electronic equipment. Tests measurements Climatic tests. Test 11a. sequence
7/16/2019 - PDF - English -
Learn More

€180.00

BS EN 61076-1:2006+A1:2019

Connectors for electronic equipment. Product requirements Generic specification
7/15/2019 - PDF - English -
Learn More

€293.00

NF EN IEC 60512-11-1, C93-400-11-1 (07/2019)

Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1 : climatic tests - Test 11a - Climatic sequence - Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure - Partie 11 : Essais climatiques - Section 1 : Essai 11a - Séquence climatique
7/1/2019 - Paper - French -
Learn More

€88.33

UNE-EN IEC 60512-99-002:2019

Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (Endorsed by Asociación Española de Normalización in June of 2019.)
6/1/2019 - PDF - English -
Learn More

€60.00

UNE-EN IEC 61076-3-124:2019

Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz (Endorsed by Asociación Española de Normalización in June of 2019.)
6/1/2019 - PDF - English -
Learn More

€83.00

IEC 60512-11-1:2019

IEC 60512-11-1:2019 Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence
5/16/2019 - PDF - English, French -
Learn More

€46.00

UNE-EN IEC 61020-1:2019

Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More

€126.00

NF EN IEC 61076-3-124, C93-406-3-124 (05/2019)

Connectors for electrical and electronic equipment - Product requirements - Part 3-124 : rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz
5/1/2019 - Paper - English -
Learn More

€141.33

UNE-EN 63024:2019

Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses
4/10/2019 - PDF - Spanish -
Learn More

€112.00

UNE-EN 63024:2019

Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses
4/10/2019 - PDF - English -
Learn More

€134.40

UNE-EN 61076-1:2006/A1:2019

Connectors for electronic equipment - Product requirements - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in April of 2019.)
4/1/2019 - PDF - English -
Learn More

€64.00

UNE-EN 61058-1-2:2016/AC:2019-02

Switches for appliances - Part 1-2: Requirements for electronic switches (Endorsed by Asociación Española de Normalización in April of 2019.)
4/1/2019 - PDF - English -
Learn More

€0.00

UNE-EN IEC 60512-23-3:2019

Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method (Endorsed by Asociación Española de Normalización in April of 2019.)
4/1/2019 - PDF - English -
Learn More

€63.00

NF EN IEC 60512-99-002, C93-400-99-002 (04/2019)

Connectors for electronic equipment - tests and measurements - Part 99-002 : endurance test schedules - Test 99b : test schedule for unintended unmating under electrical load
4/1/2019 - Paper - French -
Learn More

€88.33

UNE-EN 61058-1-1:2016/AC:2019-02

Switches for appliances - Part 1-1: Requirements for mechanical switches (Endorsed by Asociación Española de Normalización in April of 2019.)
4/1/2019 - PDF - English -
Learn More

€0.00

BS EN IEC 61020-1:2019

Electromechanical switches for use in electrical and electronic equipment Generic specification
3/26/2019 - PDF - English -
Learn More

€377.00

IEC 61076-3-124:2019

IEC 61076-3-124:2019 Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz
3/11/2019 - PDF - English, French -
Learn More

€311.00

19/30389541 DC:2019

BS EN 61076-3-106. Connectors for electrical and electronic equipment. Product requirements Part 3-106. Rectangular connectors. Detail specification protective housings use with 8-way shielded unshielded connectors industrial environments incorporating the IEC 60603-7 series interface
3/8/2019 - PDF - English -
Learn More

€24.00

19/30392895 DC:2019

BS EN IEC 61076-3-125. Connectors for electrical and electronic components. Product requirements Part 6. Connectors. Detail specification 2-way 4-way (data/power), shielded, free fixed connectors transmission capability power supply with frequencies up to 600 MHz
3/8/2019 - PDF - English -
Learn More

€24.00

BS EN IEC 60512-23-3:2019

Connectors for electrical and electronic equipment. Tests measurements Screening filtering tests. Test 23c: Shielding effectiveness of connectors accessories. Line injection method
3/5/2019 - PDF - English -
Learn More

€180.00

NF EN IEC 60512-23-3, C93-400-23-3 (03/2019)

Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3 : screening and filtering tests - Test 23c : Shielding effectiveness of connectors and accessories - Line injection method - Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure - Partie 23-3 : Essai 23c : Efficacité de blindage des connecteurs et des accessoires
3/1/2019 - Paper - French -
Learn More

€88.00

NF EN IEC 61020-1, C83-410-1 (03/2019)

Electromechanical switches for use in electrical and electronic equipment - Part 1 : generic specification
3/1/2019 - Paper - French -
Learn More

€197.00

NF EN 61076-1/A1, C93-406-1/A1 (03/2019)

Connectors for electronic equipment - Product requirements - Part 1 : generic specification - Amendement 1 : Connecteurs pour équipements électroniques - Exigences de produit - Partie 1 : Spécification générique
3/1/2019 - Paper - French -
Learn More

€103.33

UNE-EN IEC 61058-1:2019

Switches for appliances - Part 1: General requirements
2/6/2019 - PDF - Spanish -
Learn More

€156.00

UNE-EN IEC 61058-1:2019

Switches for appliances - Part 1: General requirements
2/6/2019 - PDF - English -
Learn More

€187.20

VG 95319-2 Beiblatt 1:2019-02

Electrical connectors and plug-and-socket devices - Part 2: Generic standard, guide for the selection of connectors and backshells for screened cable systems, Text in German and English
2/1/2019 - PDF - English, German -
Learn More

€169.25

19/30390177 DC:2019

BS EN 61755-3-1. Fibre optic interconnecting devices and passive components. Connector optical interfaces Part 3-1. Connection parameters for 1,25 mm 2,5 diameter cylindrical full zirconia PC ferrules, core location variant 1, non-dispersion shifted single mode fibres
1/17/2019 - PDF - English -
Learn More

€24.00

IEC 61020-1:2019

IEC 61020-1:2019 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
1/16/2019 - PDF - English, French -
Learn More

€397.00

IEC 61076-1:2006+AMD1:2019 Edition 2.1

IEC 61076-1:2006+AMD1:2019 (Consolidated version) Connectors for electronic equipment - Product requirements - Part 1: Generic specification
1/11/2019 - PDF - English, French -
Learn More

€247.00

IEC 61076-1:2006/AMD1:2019

IEC 61076-1:2006/AMD1:2019 Amendment 1 - Connectors for electronic equipment - Product requirements - Part 1: Generic specification
1/11/2019 - PDF - English, French -
Learn More

€23.00

19/30363090 DC:2019

BS EN IEC 61755-3-11. Fibre Optic Interconnecting Devices and Passive Components. Connector Optical Interfaces Part 3-11. parameters for connections of non-dispersion shifted single mode physically contacting fibres. Non-angled cylindrical full zirconia ferrules, core location variant 3
1/4/2019 - PDF - English -
Learn More

€24.00

VG 96938-1:2019-01

Electrical connectors and plug-and-socket devices - Ethernet connectors for data transmissions with threaded coupling (IP X7), up to 60 V - Part 1: Requirements, tests, detail standard, Text in German and English.
1/1/2019 - PDF - English, German -
Learn More

€115.33

UNE-EN IEC 60512-1:2018

Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in January of 2019.)
1/1/2019 - PDF - English -
Learn More

€63.00

VG 96938-3:2019-01

Electrical connectors and plug-and-socket devices - Ethernet connectors for data transmissions with threaded coupling (IP X7), up to 60 V - Part 3: Dimensions, mass, shielded, detail standard, Text in German and English.
1/1/2019 - PDF - English, German -
Learn More

€72.80

IEC 60512-23-3:2018

IEC 60512-23-3:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method
12/14/2018 - PDF - English, French -
Learn More

€92.00

IEC 60512-23-3:2018 + Redline

IEC 60512-23-3:2018 (Redline version) Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method
12/14/2018 - PDF - English -
Learn More

€120.00

BS EN IEC 60512-1:2018

Connectors for electrical and electronic equipment. Tests measurements Generic specification
12/6/2018 - PDF - English -
Learn More

€180.00

DIN EN 129201/A1 Berichtigung 1:2018-12

Blank detail specification - Wirewound inductors with ceramic or ferrite core - Assessment level E, German version EN 129201:1994/A1:1995, Corrigendum 1
12/1/2018 - PDF - German -
Learn More

€0.00

DIN EN 129202/A1 Berichtigung 1:2018-12

Blank detail specification - Wirewound inductors with ceramic or ferrite core - Assessment level P, German version EN 129202:1994/A1:1995, Corrigendum 1
12/1/2018 - PDF - German -
Learn More

€0.00

DIN EN IEC 61076-3-119 VDE 0687-76-3-119:2018-12

Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz (IEC 61076-3-119:2017), German version EN IEC 61076-3-119:2018
12/1/2018 - Paper - German -
Learn More

€98.49

NF EN IEC 60512-1, C93-400-1 (11/2018)

Connectors for electrical and electronic equipment - Tests and measurements - Part 1 : generic specification
11/1/2018 - Paper - French -
Learn More

€85.33

PD IEC PAS 60512-27-200:2018

Connectors for electrical and electronic equipment. Tests measurements Additional specifications signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors. 27a 27g
10/25/2018 - PDF - English -
Learn More

€398.00

UNE-CLC/TR 50625-6:2018 IN

Collection, logistics & treatment requirements for WEEE - Part 6: Report on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614
10/24/2018 - PDF - Spanish -
Learn More

€68.00

UNE-CLC/TR 50625-6:2018 IN

Collection, logistics & treatment requirements for WEEE - Part 6: Report on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614
10/24/2018 - PDF - English -
Learn More

€81.60

IEC 60512-1:2018 + Redline

IEC 60512-1:2018 (Redline version) Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
10/22/2018 - PDF - English -
Learn More

€120.00

IEC 60512-1:2018

IEC 60512-1:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
10/22/2018 - PDF - English, French -
Learn More

€92.00

DIN EN IEC 61076-2-111 VDE 0687-76-2-111:2018-10

Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking (IEC 61076-2-111:2017), German version EN IEC 61076-2-111:2018
10/1/2018 - Paper - German -
Learn More

€155.17

DIN EN IEC 60512-8-3 VDE 0687-512-8-3:2018-10

Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever (IEC 60512-8-3:2018), German version EN IEC 60512-8-3:2018
10/1/2018 - Paper - German -
Learn More

€45.89

DIN EN IEC 60512-15-2 VDE 0687-512-15-2:2018-10

Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) (IEC 60512-15-2:2018), German version EN IEC 60512-15-2:2018
10/1/2018 - Paper - German -
Learn More

€42.45

VG 95319-2/A1:2018-10

Electrical connectors and plug-and-socket devices - Part 2: Generic standard, Amendment A1, Text in German and English
10/1/2018 - PDF - English, German -
Learn More

€72.80

VG 96513-5:2018-09

Electrical connectors and plug-and-socket devices - Modular rectangular connector - Part 5: Contacts and contact inserts, detail standard, Text in German and English.
9/1/2018 - PDF - English, German -
Learn More

€92.62

UNE-EN IEC 61076-2-111:2018

Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking (Endorsed by Asociación Española de Normalización in August of 2018.)
8/1/2018 - PDF - English -
Learn More

€110.00

BS EN 60603-7-81:2016

Connectors for electronic equipment Detail specification 8-way, shielded, free and fixed connectors, data transmissions with frequencies up to 2 000 MHz
6/7/2018 - PDF - English -
Learn More

€250.00

DIN EN 61076-3-104 VDE 0687-76-3-104:2018-06

Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz (IEC 61076-3-104:2017), German version EN 61076-3-104:2017
6/1/2018 - Paper - German -
Learn More

€169.34

IEC 62946-01:2018

IEC 62946-01:2018 Connectors for electrical and electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A
5/24/2018 - PDF - English -
Learn More

€219.00

UNE-EN IEC 60512-8-3:2018

Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever (Endorsed by Asociación Española de Normalización in May of 2018.)
5/1/2018 - PDF - English -
Learn More

€57.00

UNE-EN IEC 60512-15-2:2018

Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) (Endorsed by Asociación Española de Normalización in May of 2018.)
5/1/2018 - PDF - English -
Learn More

€57.00

BS EN IEC 60512-8-3:2018

Connectors for electrical and electronic equipment. Tests measurements Static load tests (fixed connectors). Test 8c: Robustness of actuating lever
4/24/2018 - PDF - English -
Learn More

€180.00

BS EN IEC 60512-15-2:2018

Connectors for electrical and electronic equipment. Tests measurements Connector tests (mechanical). Test 15b: Insert retention in housing (axial)
4/24/2018 - PDF - English -
Learn More

€151.00

VG 95345-15:2018-04

Electrical and electronic circuit breakers - Part 15: Single pole, with galvanic disconnection, rated current 125 A to 500 A without or with auxiliary switch, detail standard, Text in German and English.
4/1/2018 - PDF - English, German -
Learn More

€131.96

DIN EN 61076-3-125 VDE 0687-76-3-125:2018-04

Connectors for electrical and electronic components - Product requirements - Part 3-125: Connectors - Detail specification for 2-way and 4-way (data/power), shielded, free and fixed connectors for transmission capability and power supply capability with frequencies up to 600 MHz (IEC 48B/2600/CD:2017), Text in German and English
4/1/2018 - Paper - German -
Learn More

€42.45

UNE-EN IEC 61076-3-119:2018

Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz (Endorsed by Asociación Española de Normalización in April of 2018.)
4/1/2018 - PDF - English -
Learn More

€76.00

DIN EN 61076-3-122 VDE 0687-76-3-122:2018-04

Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments (IEC 61076-3-122:2017), German version EN 61076-3-122:2017
4/1/2018 - Paper - German -
Learn More

€91.70

BS EN IEC 61076-3-119:2018

Connectors for electrical and electronic equipment. Product requirements Rectangular connectors. Detail specification shielded unshielded, free fixed 10-way connectors with push-pull coupling industrial environments data transmission frequencies up to 100 MHz
3/26/2018 - PDF - English -
Learn More

€293.00

BS EN IEC 61076-2-111:2018

Connectors for electrical and electronic equipment. Product requirements Circular connectors. Detail specification power connectors with M12 screw-locking
3/26/2018 - PDF - English -
Learn More

€377.00

NF EN 61726, C93-586 (03/2018)

Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method - Câbles, cordons, connecteurs et composants hyperfréquence passifs
3/1/2018 - Paper - French -
Learn More

€85.42

NF EN IEC 60512-15-2, C93-400-15-2 (03/2018)

Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2 : connector tests (mechanical) - Test 15b : insert retention in housing (axial)
3/1/2018 - Paper - French -
Learn More

€69.60

UNE-EN 62359:2011/A1:2018

Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields (Endorsed by Asociación Española de Normalización in March of 2018.)
3/1/2018 - PDF - English -
Learn More

€72.00

NF EN IEC 61076-3-119, C93-403-3-119 (03/2018)

Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 3-119 : connecteurs rectangulaires - Spécification particulière pour les fiches et les embases rectangulaires écrantées et non écrantées à 10 pôles, à accouplement pousser tirer, destinées à être utilisées dans des environnements industriels, pour les transmissions de données avec des fréquences allant jusqu'à 100 MHz
3/1/2018 - Paper - French -
Learn More

€127.50

NF EN IEC 60512-8-3, C93-400-8-3 (03/2018)

Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3 : static load tests (fixed connectors) - Test 8c : robustness of actuating lever
3/1/2018 - Paper - French -
Learn More

€69.60

VG 95324-10:2018-03

Electrical connectors and plug-and-socket devices - connectors for printed boards - Part 10: Pin and socket connectors with circular contacts, detail standard, Text in German and English
3/1/2018 - PDF - English, German -
Learn More

€99.35

NF EN IEC 61076-2-111, C93-406-2-111 (03/2018)

Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 2-111 : connecteurs circulaires - Spécification particulière pour les connecteurs d'alimentation à vis M12
3/1/2018 - Paper - French -
Learn More

€183.00

PD IEC/PAS 61076-3-126:2018

Connectors for electrical and electronic equipment. Product requirements Rectangular connectors - Detail specification 5 pole power connector industrial environments with push-pull locking
2/28/2018 - PDF - English -
Learn More

€331.00

JIS C 5402-17-3:2018

Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
2/20/2018 - PDF - Japanese -
Learn More

€32.50

DIN EN 61076-2-113 VDE 0687-2-113:2018-02

Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz (IEC 61076-2-113:2017), German version EN 61076-2-113:2017
2/1/2018 - Paper - German -
Learn More

€98.49

IEEE 2700:2017

IEEE Standard for Sensor Performance Parameter Definitions
1/31/2018 - PDF - English -
Learn More

€79.00

IEEE 2700:2017

IEEE Standard for Sensor Performance Parameter Definitions
1/31/2018 - Paper - English -
Learn More

€100.00

IEC 60512-15-2:2018

IEC 60512-15-2:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)
1/12/2018 - PDF - English, French -
Learn More

€23.00

IEC 60512-8-3:2018

IEC 60512-8-3:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever
1/12/2018 - PDF - English, French -
Learn More

€46.00

ANSI/VITA 46.9:2018

PMC/XMC Rear I/O Fabric Signal Mapping on 3U and 6U VPX Modules Standard
1/1/2018 - PDF - English -
Learn More

€90.00

EIA-364-78C:2018

TP-78C Cavity Leakage Bonding Integrity Test Procedure for Electrical Connectors
1/1/2018 - PDF sécurisé - English -
Learn More

€78.75

IEC 61076-3-119:2017

IEC 61076-3-119:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
12/8/2017 - PDF - English, French -
Learn More

€270.00

IEC 61076-3-119:2017

IEC 61076-3-119:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
12/8/2017 - PDF - English -
Learn More

€270.00

IEC 61076-2-111:2017

IEC 61076-2-111:2017 Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
12/7/2017 - PDF - English -
Learn More

€397.00

IEC 61076-2-111:2017

IEC 61076-2-111:2017 Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
12/7/2017 - PDF - English, French -
Learn More

€397.00

BS EN 61000-4-39:2017

Electromagnetic compatibilty (EMC) Testing and measurement techniques. Radiated fields in close proximity. Immunity test
11/21/2017 - PDF - English -
Learn More

€331.00

BS EN 61076-2-113:2017

Connectors for electronic equipment. Product requirements Circular connectors. Detail specification connectors with M12 screw locking power and signal contacts data transmission frequency up to 100 MHz
11/20/2017 - PDF - English -
Learn More

€293.00

UNE-CLC/TS 50625-3-4:2017

Collection, logistics & treatment requirements for WEEE - Part 3-4: Specification for de-pollution - temperature exchange equipment (Endorsed by Asociación Española de Normalización in November of 2017.)
11/1/2017 - PDF - English -
Learn More

€98.00

UNE-EN 61076-3-104:2017

Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz (Endorsed by Asociación Española de Normalización in November of 2017.)
11/1/2017 - PDF - English -
Learn More

€28.00

NF EN 50625-2-4, C05-625-2-4 (11/2017)

Collection, logistics & treatment requirements for WEEE - Part 2-4 : treatment requirements for photovoltaic panels
11/1/2017 - Paper - French -
Learn More

€103.33

EIA-364-117:2017 (R2023)

TP-117 Dielectric Breakdown Voltage Test Procedure for Electrical Connectors, Sockets and Coaxial Contacts
11/1/2017 - PDF sécurisé - English -
Learn More

€83.00

UNE-CLC/TS 50625-3-3:2017

Collection, logistics & treatment requirements for WEEE - Part 3-3: Specification for de-pollution - WEEE containing CRTs and flat panel displays (Endorsed by Asociación Española de Normalización in November of 2017.)
11/1/2017 - PDF - English -
Learn More

€74.00

UNE-EN 61076-3-122:2017

Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments (Endorsed by Asociación Española de Normalización in November of 2017.)
11/1/2017 - PDF - English -
Learn More

€72.00

UNE-CLC/TS 50625-5:2017

Collection, logistics & Treatment requirements for WEEE - Part 5: Specification for the final treatment of WEEE fractions - Copper and precious metals (Endorsed by Asociación Española de Normalización in November of 2017.)
11/1/2017 - PDF - English -
Learn More

€69.00

BS EN 61076-3-104:2017

Connectors for electrical and electronic equipment. Product requirements Detail specification 8-way, shielded free fixed connectors data transmissions with frequencies up to 2 000 MHz
10/24/2017 - PDF - English -
Learn More

€377.00

JIS C 5630-26:2017

Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro trench and needle structures
10/20/2017 - PDF - Japanese -
Learn More

€36.27

DIN CLC/TS 50625-4 VDE V 0042-13-4:2017-10

Collection, logistics & treatment requirements for WEEE - Part 4: Specification for the collection and logistics associated with WEEE, German version CLC/TS 50625-4:2017
10/1/2017 - Paper - German -
Learn More

€61.54

DIN CLC/TS 50625-5 VDE V 0042-13-5:2017-10

Collection, logistics & Treatment requirements for WEEE - Part 5: Specification for the final treatment of WEEE fractions - Copper and precious metals, German version CLC/TS 50625-5:2017
10/1/2017 - Paper - German -
Learn More

€77.84

PD CLC/TS 50625-4:2017

Collection, logistics & treatment requirements for WEEE Specification the collection and associated with
9/7/2017 - PDF - English -
Learn More

€180.00

NF EN 61076-3-104, C93-406-3-104 (09/2017)

Connectors for electronic equipment - Product requirements - Part 3-104 : detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2000 MHz - Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 3-104 : spécification particulière pour les fiches et les embases écrantées à 8 voies pour la transmission de données à des fréquences jusqu'à 2 000 MHz
9/1/2017 - Paper - French -
Learn More

€197.00

UNE-EN 60603-7-81:2016/AC:2017-07

Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz (Endorsed by Asociación Española de Normalización in September of 2017.)
9/1/2017 - PDF - English -
Learn More

€0.00

DIN VDE 0042-14 VDE 0042-14:2017-09

Requirements for the preparation for re-use of waste electrical and electronic equipment
9/1/2017 - Paper - German -
Learn More

€42.45

NF EN 61076-2-113, C93-406-2-113 (08/2017)

Connectors for electronic equipment - Product requirements - Part 2-113 : circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz - Connecteurs pour équipements électroniques - Exigences de produit - Partie 2-113 : Connecteurs circulaires - Spécification particulière relative aux connecteurs à contacts de puissance et de données, avec verrouillage à vis M12 pour des fréquences jusqu'à 100 MHz
8/1/2017 - Paper - French -
Learn More

€127.67

DIN EN 61076-8-102 VDE 0687-76-8-102:2017-07

Connectors for electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 150 A (IEC 48B/2544/CD:2016)
7/1/2017 - Paper - German -
Learn More

€38.31

DIN EN 60603-7-82 VDE 0687-7-82:2017-07

Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz (IEC 60603-7-82:2016), German version EN 60603-7-82:2016
7/1/2017 - Paper - German -
Learn More

€61.54

DIN EN 61076-8-100 VDE 0687-76-8-100:2017-07

Connectors for electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 20 A (IEC 48B/2542/CD:2016)
7/1/2017 - Paper - German -
Learn More

€38.31

DIN EN 61076-3-124 VDE 0687-76-3-124:2017-07

Connectors for electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10way, shielded, free and fixed rectangular connectors for I/O and data transmission capability with frequencies up to 500 MHz (IEC 48B/2552/CD:2017)
7/1/2017 - Paper - German -
Learn More

€38.31

DIN EN 61076-8-101 VDE 0687-76-8-101:2017-07

Connectors for electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 40 A (IEC 48B/2543/CD:2016)
7/1/2017 - Paper - German -
Learn More

€38.31

DIN EN 60512-23-3 VDE 0687-512-23-3:2017-07

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories (IEC 48B/2559/CD:2017)
7/1/2017 - Paper - German -
Learn More

€18.19

UNE-EN 61076-2-113:2017

Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz (Endorsed by Asociación Española de Normalización in July of 2017.)
7/1/2017 - PDF - English -
Learn More

€75.00

VG 96944-1:2017-06

Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 1: Requirements, tests, detail standard, Text in German and English
6/1/2017 - PDF - English, German -
Learn More

€114.10

VG 96944-4:2017-06

Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 4: Dimensions, mass, detail standard, Text in German and English.
6/1/2017 - PDF - English, German -
Learn More

€65.89

DIN EN 61076-3-120 VDE 0687-76-3-120:2017-06

Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A (IEC 61076-3-120:2016), German version EN 61076-3-120:2016
6/1/2017 - Paper - German -
Learn More

€77.84

VG 96944-2:2017-06

Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 2: Mounting, detail standard, Text in German and English
6/1/2017 - PDF - English, German -
Learn More

€59.63

VG 96944-5:2017-06

Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 5: Contacts and contact inserts, detail standard, Text in German and English.
6/1/2017 - PDF - English, German -
Learn More

€85.79

DIN EN 61076-3-110 VDE 0687-76-3-110:2017-06

Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz (IEC 61076-3-110:2016), German version EN 61076-3-110:2016
6/1/2017 - Paper - German -
Learn More

€61.54

VG 96944-3:2017-06

Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 3: Mating dimensions, detail standard, Text in German and English
6/1/2017 - PDF - English, German -
Learn More

€72.80

VG 95319-1007:2017-04

Electrical connectors and plug-and-socket devices - Part 1007: Circular connectors with threaded coupling and removable crimp contacts, jam-nut mounting (MIL-DTL-38999/24J with amendment 2), Text in German and English
4/1/2017 - PDF - English, German -
Learn More

€68.30

DIN EN 62047-25:2017-04

Semiconductor devices - Micro-electromechanical devices - Part 25: Silicon based MEMS fabrication technology - Measurement method of pull-press and shearing strength of micro bonding area (IEC 62047-25:2016), German version EN 62047-25:2016
4/1/2017 - PDF - German -
Learn More

€99.35

VG 95319-1006:2017-04

Electrical connectors and plug-and-socket devices - Part 1006: Circular connectors with threaded coupling and removable crimp contacts, wall mounting flange (MIL-DTL-38999/20G with amendment 4), Text in German and English
4/1/2017 - PDF - English, German -
Learn More

€68.30

17/30334978 DC:2017

BS EN 62946-01. Connectors for electronic equipment. Part 01. Rectangular connectors. Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A
3/6/2017 - PDF - English -
Learn More

€24.00

NF EN 60603-7-82, C93-430-7-82 (03/2017)

Connectors for electronic equipment - Part 7-82 : detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz
3/1/2017 - Paper - French -
Learn More

€88.33

PD IEC/TS 61586:2017

Estimation of the reliability of electrical connectors
2/28/2017 - PDF - English -
Learn More

€250.00

IEC 61076-2-113:2017

IEC 61076-2-113:2017 Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
2/21/2017 - PDF - English, French -
Learn More

€270.00

UNE-EN 60603-7-82:2016

Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz (Endorsed by Asociación Española de Normalización in February of 2017.)
2/1/2017 - PDF - English -
Learn More

€63.00

VG 95319-100:2017-02

Electrical connectors and plug-and-socket devices - Part 100: Expanded beam free connector (MIL-DTL-83526/20C with amendment 1), detail standard, Text in German and English
2/1/2017 - PDF - English, German -
Learn More

€126.26

UNE-EN 61076-3-120:2016

Connectors for electronic equipment - product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 v d.c. And rated current of 30 a (Endorsed by Asociación Española de Normalización in February of 2017.)
2/1/2017 - PDF - English -
Learn More

€69.00

VG 95319-101:2017-02

Electrical connectors and plug-and-socket devices - Part 101: Expanded beam free connector (MIL-DTL-83526/21C with amendment 1), detail standard, Text in German and English
2/1/2017 - PDF - English, German -
Learn More

€120.84

BS EN 60603-7-82:2016

Connectors for electronic equipment Detail specification 8-way, 12 contacts, shielded, free and fixed connectors, data transmission with frequencies up to 2 000 MHz
1/31/2017 - PDF - English -
Learn More

€250.00

BS EN 61076-3-120:2016

Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification rewirable power connectors with snap locking rated voltage of 250 V d.c. and current 30 A
1/31/2017 - PDF - English -
Learn More

€250.00

IEC TS 61586:2017

IEC TS 61586:2017 Estimation of the reliability of electrical connectors
1/25/2017 - PDF - English, French -
Learn More

€219.00

IEC 62946-02:2017

IEC 62946-02:2017 Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, free and fixed high density connectors for data transmission up to 250 MHz and with current carrying capacity up to 1 A
1/20/2017 - PDF - English -
Learn More

€219.00

NF EN 61076-3-110, C93-406-3-110 (01/2017)

Connectors for electronic equipment - Product requirements - Part 3-110 : detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 3 000 MHz
1/1/2017 - Paper - French -
Learn More

€88.33

UNE-EN 61076-3-110:2016

Connectors for electronic equipment - Product requirements - Part 3-110: detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 mhz (Endorsed by Asociación Española de Normalización in January of 2017.)
1/1/2017 - PDF - English -
Learn More

€63.00