29.100 : Components for electrical equipment
-
VG 95447-1:2024-03
Equipment housings - Part 1: Summary, Text in German and English
3/1/2024 - PDF - English, German - DIN
Learn More€59.63 -
VG 95447-2:2024-03
Equipment housings - Part 2: Portable housings, 19 in slide-in technique, generic standard, Text in German and English
3/1/2024 - PDF - English, German - DIN
Learn More€99.35 -
VG 95447-4:2024-03
Equipment housings - Part 4: Portable housings, 19 in slide-in technique, mounting and guidelines for application, Text in German and English
3/1/2024 - PDF - English, German - DIN
Learn More€52.90 -
VG 95447-8:2024-03
Equipment housings - Part 8: Portable housings, 19 in slide-in technique, detail standard, Text in German and English
3/1/2024 - PDF - English, German - DIN
Learn More€99.35 -
BS EN IEC 60938-2-1:2024 + Redline
Tracked Changes. Fixed inductors for electromagnetic interference suppression Blank detail specification. Inductors which safety tests are required
2/13/2024 - PDF - English - BSI
Learn More€235.00 -
BS EN IEC 60938-2-1:2024
Fixed inductors for electromagnetic interference suppression Blank detail specification. Inductors which safety tests are required
1/24/2024 - PDF - English - BSI
Learn More€180.00 -
NF EN IEC 60938-2-1, C93-380-2-1 (01/2024)
Inductances fixes d'antiparasitage - Partie 2-1 : spécification particulière-cadre - Inductances exigeant des essais de sécurité
1/1/2024 - Paper - French - AFNOR
Learn More€88.33 -
IEC 60938-2-1:2023
IEC 60938-2-1:2023 Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required
12/6/2023 - PDF - English, French - IEC
Learn More€132.00 -
ASTM A1101-23
Standard Specification for Sintered and Fully Dense Neodymium Iron Boron (NdFeB) Permanent Magnets
12/1/2023 - PDF - English - ASTM
Learn More€66.00 -
ASTM A1101-23 + Redline
Standard Specification for Sintered and Fully Dense Neodymium Iron Boron (NdFeB) Permanent Magnets
12/1/2023 - PDF - English - ASTM
Learn More€79.00 -
BS EN IEC 60512-99-003:2023
Connectors for electrical and electronic equipment. Tests measurements Endurance test schedules. Test 99c: schedule balanced single-pair connectors separating (unmating) under load
11/23/2023 - PDF - English - BSI
Learn More€180.00 -
BS EN IEC 61800-5-3:2023
Adjustable speed electrical power drive systems Safety requirements. Functional, and environmental requirements for encoders
11/1/2023 - PDF - English - BSI
Learn More€398.00 -
UNE-EN IEC 63300:2023
Test methods for electrical and magnetic properties of magnetic powder cores (Endorsed by Asociación Española de Normalización in October of 2023.)
10/6/2023 - PDF - English - AENOR
Learn More€96.00 -
UNE-EN IEC 62044-3:2023
Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level (Endorsed by Asociación Española de Normalización in October of 2023.)
10/6/2023 - PDF - English - AENOR
Learn More€88.00 -
BS EN IEC 62044-3:2023 + Redline
Tracked Changes. Cores made of soft magnetic materials. Measuring methods Magnetic properties at high excitation level
10/2/2023 - PDF - English - BSI
Learn More€454.00 -
DIN EN IEC 63182-5:2023-10
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: Cylinder-cores (IEC 63182-5:2021), German version EN IEC 63182-5:2022
10/1/2023 - PDF - German - DIN
Learn More€72.80 -
BS EN IEC 62044-3:2023
Cores made of soft magnetic materials. Measuring methods Magnetic properties at high excitation level
9/7/2023 - PDF - English - BSI
Learn More€348.00 -
DIN EN IEC 63093-10:2023-09
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 10: PM-cores and associated parts (IEC 63093-10:2022), German version EN IEC 63093-10:2022.
9/1/2023 - PDF - German - DIN
Learn More€99.35 -
NF EN IEC 62044-3, C93-369-3 (09/2023)
Noyaux en matériaux magnétiques doux - Méthodes de mesure - Partie 3 : propriétés magnétiques à niveau élevé d'excitation
9/1/2023 - Paper - French - AFNOR
Learn More€141.33 -
BS EN IEC 63300:2023
Test methods for electrical and magnetic properties of magnetic powder cores
8/30/2023 - PDF - English - BSI
Learn More€348.00 -
BS EN IEC 62321-12:2023
Determination of certain substances in electrotechnical products Simultaneous determination. Polybrominated biphenyls, polybrominated diphenyl ethers and phthalates polymers by gas chromatography-mass spectrometry
8/18/2023 - PDF - English - BSI
Learn More€293.00 -
NF EN IEC 63300, C93-300 (08/2023)
Méthodes d'essai des propriétés électriques et magnétiques des noyaux en poudre magnétique
8/1/2023 - Paper - French - AFNOR
Learn More€153.67 -
DIN EN IEC 63182-3:2023-08
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: E-cores (IEC 63182-3:2021), German version EN IEC 63182-3:2022
8/1/2023 - PDF - German - DIN
Learn More€85.79 -
DIN EN IEC 63299:2023-08
Classification of magnetic powder cores (IEC 63299:2022), German version EN IEC 63299:2022
8/1/2023 - PDF - German - DIN
Learn More€85.79 -
UNE-EN IEC 62321-3-4:2023
Determination of certain substances in electrotechnical products - Part 3-4: Screening - Phthalates in polymers of electrotechnical products by high performance liquid chromatography with ultraviolet detector (HPLC-UV), thin layer chromatography (TLC) and thermal desorption mass spectrometry (TD-MS) (Endorsed by Asociación Española de Normalización in July of 2023.)
7/26/2023 - PDF - English - AENOR
Learn More€95.00 -
IEC 62044-3:2023
IEC 62044-3:2023 Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level
7/7/2023 - PDF - English, French - IEC
Learn More€311.00 -
IEC 62044-3:2023 + Redline
IEC 62044-3:2023 (Redline version) Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level
7/7/2023 - PDF - English - IEC
Learn More€404.00 -
DIN EN IEC 63182-4:2023-07
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: Block-cores (IEC 63182-4:2021), German version EN IEC 63182-4:2022
7/1/2023 - PDF - German - DIN
Learn More€72.80 -
IEC 63300:2023
IEC 63300:2023 Test methods for electrical and magnetic properties of magnetic powder cores
6/27/2023 - PDF - English, French - IEC
Learn More€345.00 -
BS EN IEC 62321-3-4:2023
Determination of certain substances In electrotechnical products Screening. Phthalates in polymers by high performance liquid chromatography with ultraviolet detector (HPLC-UV), thin layer (TLC) and thermal desorption mass spectrometry (TD-MS)
6/15/2023 - PDF - English - BSI
Learn More€348.00 -
UNE-EN IEC 62321-12:2023
Determination of certain substances in electrotechnical products - Part 12: Simultaneous determination - Polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry (Endorsed by Asociación Española de Normalización in June of 2023.)
6/3/2023 - PDF - English - AENOR
Learn More€78.00 -
IEC 62321-3-4:2023
IEC 62321-3-4:2023 Determination of certain substances in electrotechnical products - Part 3-4: Screening - Phthalates in polymers of electrotechnical products by high performance liquid chromatography with ultraviolet detector (HPLC-UV), thin layer chromatography (TLC) and thermal desorption mass spectrometry (TD-MS)
5/3/2023 - PDF - English, French - IEC
Learn More€345.00 -
BS EN IEC 61969-1:2023 + Redline
Tracked Changes. Mechanical structures for electrical and electronic equipment. Outdoor enclosures Design guidelines
4/27/2023 - PDF - English - BSI
Learn More€235.00 -
BS EN IEC 61969-1:2023
Mechanical structures for electrical and electronic equipment. Outdoor enclosures Design guidelines
4/3/2023 - PDF - English - BSI
Learn More€180.00 -
IEC 62321-12:2023
IEC 62321-12:2023 Determination of certain substances in electrotechnical products - Part 12: Simultaneous determination – Polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry
3/10/2023 - PDF - English, French - IEC
Learn More€270.00 -
DIN EN IEC 61631:2022-12
Test method for the mechanical strength of cores made of magnetic oxides (IEC 61631:2020), German version EN IEC 61631:2020.
12/1/2022 - PDF - German - DIN
Learn More€99.35 -
NF EN IEC 63237-1, C73-237-1 (12/2022)
Appareils électrodomestiques et analogues - Propriétés des informations produit - Partie 1 : Principes essentiels
12/1/2022 - Paper - French - AFNOR
Learn More€103.33 -
IEC TS 62474-1:2022
IEC TS 62474-1:2022 Material declaration for products of and for the electrotechnical industry - Part 1: Guidance on the implementation of IEC 62474
11/16/2022 - PDF - English - IEC
Learn More€397.00 -
€180.00
-
UNE-EN IEC 63093-10:2022
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 10: PM-cores and associated parts (Endorsed by Asociación Española de Normalización in July of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€68.00 -
UNE-EN IEC 63299:2022
Classification of magnetic powder cores (Endorsed by Asociación Española de Normalización in December of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€62.00 -
€88.33
-
BS EN IEC 63093-10:2022 + Redline
Tracked Changes. Ferrite cores. Guidelines on dimensions and the limits of surface irregularities PM-cores associated parts
9/29/2022 - PDF - English - BSI
Learn More€326.00 -
IEC 63299:2022
IEC 63299:2022 Classification of magnetic powder cores
9/15/2022 - PDF - English, French - IEC
Learn More€46.00 -
BS EN IEC 63093-10:2022
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities PM-cores associated parts
8/4/2022 - PDF - English - BSI
Learn More€250.00 -
DIN EN IEC 63182-2:2022-08
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Ring-cores (IEC 63182-2:2020), German version EN IEC 63182-2:2020
8/1/2022 - PDF - German - DIN
Learn More€79.72 -
DIN SPEC 91411:2022-08
Requirements for the technical representation of magnetic measurement scales in design drawings
8/1/2022 - PDF - German - DIN
Learn More€0.00 -
NF EN 50419, C04-230 (07/2022)
Marquage des équipements électriques et électroniques pour la collecte séparée des déchets EEE (DEEE)
7/1/2022 - Paper - French - AFNOR
Learn More€72.00 -
NF EN IEC 63093-8, C93-093-8 (07/2022)
Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 8 : noyaux E
7/1/2022 - Paper - French - AFNOR
Learn More€116.33 -
BS EN IEC 63182-4:2022
Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities Block-cores
6/23/2022 - PDF - English - BSI
Learn More€180.00 -
BS EN IEC 63182-5:2022
Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities Cylinder-cores
6/23/2022 - PDF - English - BSI
Learn More€180.00 -
NF EN IEC 63093-10, C93-093-10 (05/2022)
Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 10 : Noyaux PM et parties associées
5/1/2022 - Paper - French - AFNOR
Learn More€103.33 -
IEC 63093-10:2022
IEC 63093-10:2022 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 10: PM-cores and associated parts
4/21/2022 - PDF - English, French - IEC
Learn More€132.00 -
BS EN IEC 63182-3:2022
Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities E-cores
3/3/2022 - PDF - English - BSI
Learn More€250.00 -
UNE-EN IEC 63182-4:2022
Magnetic powder cores - guidelines on dimensions and the limits of surface irregularities - Part 4: Block-cores (Endorsed by Asociación Española de Normalización in March of 2022.)
3/1/2022 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN IEC 63182-5:2022
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: Cylinder-cores (Endorsed by Asociación Española de Normalización in March of 2022.)
3/1/2022 - PDF - English - AENOR
Learn More€62.00 -
UNE-EN IEC 63182-3:2022
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: E-cores (Endorsed by Asociación Española de Normalización in March of 2022.)
3/1/2022 - PDF - English - AENOR
Learn More€63.00 -
NF EN IEC 63182-3, C93-182-3 (02/2022)
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 3 : E-cores
2/1/2022 - Paper - French - AFNOR
Learn More€88.33 -
NF EN IEC 63182-5, C93-182-5 (01/2022)
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 5 : Cylinder-cores
1/1/2022 - Paper - French - AFNOR
Learn More€72.00 -
NF EN IEC 63182-4, C93-182-4 (01/2022)
Magnetic powder cores - guidelines on dimensions and the limits of surface irregularities - Part 4 : Block-cores
1/1/2022 - Paper - French - AFNOR
Learn More€72.00 -
IEC 63182-3:2021
IEC 63182-3:2021 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: E-cores
12/16/2021 - PDF - English, French - IEC
Learn More€92.00 -
IEC 63182-4:2021
IEC 63182-4:2021 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: Block-cores
11/29/2021 - PDF - English, French - IEC
Learn More€46.00 -
IEC 63182-5:2021
IEC 63182-5:2021 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: Cylinder-cores
11/29/2021 - PDF - English, French - IEC
Learn More€46.00 -
DIN EN IEC 62025-2:2021-11
High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics (IEC 62025-2:2019), German version EN IEC 62025-2:2019.
11/1/2021 - PDF - German - DIN
Learn More€110.00 -
BS EN 62262:2002+A1:2021
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
10/21/2021 - PDF - English - BSI
Learn More€180.00 -
DIN EN IEC 62024-2:2021-10
High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters (IEC 62024-2:2020), German version EN IEC 62024-2:2020.
10/1/2021 - PDF - German - DIN
Learn More€99.35 -
UNE-EN IEC 60938-1:2021
Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in October of 2021.)
10/1/2021 - PDF - English - AENOR
Learn More€75.00 -
UNE-EN IEC 60938-2:2021
Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification on Power Line Chokes (Endorsed by Asociación Española de Normalización in October of 2021.)
10/1/2021 - PDF - English - AENOR
Learn More€78.00 -
BS EN IEC 60938-2:2021
Fixed inductors for electromagnetic interference suppression Sectional specification on power line chokes
9/14/2021 - PDF - English - BSI
Learn More€293.00 -
BS EN IEC 60938-1:2021
Fixed inductors for electromagnetic interference suppression Generic specification
8/11/2021 - PDF - English - BSI
Learn More€293.00 -
NF EN IEC 60938-1, C93-380-1 (08/2021)
Fixed inductors for electromagnetic interference suppression - Part 1 : Generic specification - Inductances fixes d'antiparasitage - Partie 1 : Spécification générique.
8/1/2021 - Paper - French - AFNOR
Learn More€103.33 -
NF EN IEC 60938-2, C93-380-2 (08/2021)
Fixed inductors for electromagnetic interference suppression - Part 2 : Sectional specification on Power Line Chokes
8/1/2021 - Paper - French - AFNOR
Learn More€127.67 -
NF EN IEC 63093-6, C93-093-6 (08/2021)
Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 6 : noyaux ETD utilisés dans les alimentations électriques
8/1/2021 - Paper - French - AFNOR
Learn More€103.33 -
DIN EN IEC 60401-1:2021-08
Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions (IEC 60401-1:2020), German version EN IEC 60401-1:2020.
8/1/2021 - PDF - German - DIN
Learn More€110.00 -
IEC 60938-2:2021
IEC 60938-2:2021 Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification on power line chokes
7/20/2021 - PDF - English, French - IEC
Learn More€270.00 -
BS EN IEC 61007:2020
Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
7/12/2021 - PDF - English - BSI
Learn More€377.00 -
IEC 60938-1:2021
IEC 60938-1:2021 Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification
6/16/2021 - PDF - English, French - IEC
Learn More€270.00 -
BS EN 62044-2:2005
Cores made of soft magnetic materials. Measuring methods Magnetic properties at low excitation level
6/15/2021 - PDF - English - BSI
Learn More€293.00 -
BS EN IEC 61010-2-130:2021
Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for equipment intended to be used in educational establishments by children
6/4/2021 - PDF - English - BSI
Learn More€293.00 -
DIN EN IEC 63182-1:2021-06
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification (IEC 63182-1:2020), German version EN IEC 63182-1:2020
6/1/2021 - PDF - German - DIN
Learn More€92.62 -
DIN EN IEC 61333:2021-04
Marking on ferrite cores (IEC 61333:2019), German version EN IEC 61333:2019.
4/1/2021 - PDF - German - DIN
Learn More€59.63 -
DIN EN IEC 63093-9:2021-03
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores (IEC 63093-9:2020), German version EN IEC 63093-9:2020.
3/1/2021 - PDF - German - DIN
Learn More€115.33 -
DIN EN IEC 63093-2:2021-03
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications (IEC 63093-2:2020), German version EN IEC 63093-2:2020.
3/1/2021 - PDF - German - DIN
Learn More€99.35 -
DIN EN IEC 63093-3:2021-03
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches (IEC 63093-3:2020), German version EN IEC 63093-3:2020.
3/1/2021 - PDF - German - DIN
Learn More€85.79 -
DIN EN IEC 63093-1:2021-03
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification (IEC 63093-1:2020), German version EN IEC 63093-1:2020.
3/1/2021 - PDF - German - DIN
Learn More€85.79 -
DIN EN IEC 60276:2021-03
Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature (IEC 60276:2018), German version EN IEC 60276:2019.
3/1/2021 - PDF - German - DIN
Learn More€136.82 -
ASTM A596/A596M-21
Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Point by Point (Ballistic) Method and Ring Specimens
2/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM A596/A596M-21 + Redline
Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Point by Point (Ballistic) Method and Ring Specimens
2/1/2021 - PDF - English - ASTM
Learn More€61.00 -
BS EN IEC 62474:2019+A1:2021
Material declaration for products of and for the electrotechnical industry
1/27/2021 - PDF - English - BSI
Learn More€293.00 -
UNE-EN IEC 63182-2:2020
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Ring-cores (Endorsed by Asociación Española de Normalización in January of 2021.)
1/1/2021 - PDF - English - AENOR
Learn More€63.00 -
PD IEC TR 63307:2020
Measurement methods of the complex relative permeability and permittivity of noise suppression sheet
12/7/2020 - PDF - English - BSI
Learn More€377.00 -
IEC 62474:2018+AMD1:2020 Edition 2.1
IEC 62474:2018+AMD1:2020 (Consolidated version) Material declaration for products of and for the electrotechnical industry
12/7/2020 - PDF - English, French - IEC
Learn More€385.00 -
IEC TR 63307:2020
IEC TR 63307:2020 Measurement methods of the complex relative permeability and permittivity of noise suppression sheet
11/27/2020 - PDF - English - IEC
Learn More€397.00 -
BS EN IEC 63182-2:2020
Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities Ring-cores
11/18/2020 - PDF - English - BSI
Learn More€180.00 -
NF EN IEC 63182-2, C93-182-2 (11/2020)
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 2 : ring-cores
11/1/2020 - Paper - French - AFNOR
Learn More€88.33 -
UNE-EN IEC 61007:2020
Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures (Endorsed by Asociación Española de Normalización in October of 2020.)
10/1/2020 - PDF - English - AENOR
Learn More€132.00 -
IEC 63182-2:2020
IEC 63182-2:2020 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Ring-cores
9/29/2020 - PDF - English, French - IEC
Learn More€46.00 -
UNE-EN IEC 63182-1:2020
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€66.00 -
UNE-EN IEC 61631:2020
Test method for the mechanical strength of cores made of magnetic oxides (Endorsed by Asociación Española de Normalización in August of 2020.)
8/1/2020 - PDF - English - AENOR
Learn More€68.00 -
BS EN IEC 63182-1:2020
Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities General specification
7/29/2020 - PDF - English - BSI
Learn More€180.00 -
IEC 61007:2020
IEC 61007:2020 Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
7/20/2020 - PDF - English, French - IEC
Learn More€431.00 -
BS EN IEC 61631:2020
Test method for the mechanical strength of cores made of magnetic oxides
7/2/2020 - PDF - English - BSI
Learn More€180.00 -
NF EN IEC 63182-1, C93-182-1 (07/2020)
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1 : general specification
7/1/2020 - Paper - French - AFNOR
Learn More€88.33 -
UNE-EN IEC 62024-2:2020
High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€68.00 -
UNE-EN IEC 63093-2:2020
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€70.00 -
UNE-EN IEC 63093-3:2020
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN IEC 60401-1:2020
Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN IEC 63093-1:2020
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN IEC 63093-9:2020
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€76.00 -
BS EN IEC 63093-1:2020
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities General specification
6/18/2020 - PDF - English - BSI
Learn More€180.00 -
BS EN IEC 63093-9:2020
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities Planar cores
6/17/2020 - PDF - English - BSI
Learn More€293.00 -
BS EN IEC 60401-1:2020
Terms and nomenclature for cores made of magnetically soft ferrites used physical irregularities reference dimensions
6/9/2020 - PDF - English - BSI
Learn More€250.00 -
UNE-EN IEC 61535:2020
Installation couplers intended for permanent connection in fixed installations
6/3/2020 - PDF - Spanish - AENOR
Learn More€110.00 -
UNE-EN IEC 61535:2020
Installation couplers intended for permanent connection in fixed installations
6/3/2020 - PDF - English - AENOR
Learn More€132.00 -
NF EN IEC 61631, C93-633 (06/2020)
Test method for the mechanical strength of cores made of magnetic oxides
6/1/2020 - Paper - French - AFNOR
Learn More€88.33 -
NF EN IEC 63093-1, C93-093-1 (06/2020)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1 : general specification
6/1/2020 - Paper - French - AFNOR
Learn More€88.33 -
NF EN IEC 63093-9, C93-093-9 (06/2020)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9 : planar cores
6/1/2020 - Paper - French - AFNOR
Learn More€116.33 -
BS EN IEC 63093-2:2020
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities Pot-cores for use in telecommunications, power supply, filter applications
5/27/2020 - PDF - English - BSI
Learn More€250.00 -
BS EN IEC 62024-2:2020
High frequency inductive components. Electrical characteristics and measuring methods Rated current of inductors for DC-to-DC converters
5/27/2020 - PDF - English - BSI
Learn More€250.00 -
IEC 63182-1:2020
IEC 63182-1:2020 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
5/27/2020 - PDF - English - IEC
Learn More€92.00 -
IEC 63182-1:2020
IEC 63182-1:2020 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
5/27/2020 - PDF - English, French - IEC
Learn More€92.00 -
BS EN IEC 63093-3:2020
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities Half pot-cores made ferrite for inductive proximity switches
5/26/2020 - PDF - English - BSI
Learn More€180.00 -
IEC 61631:2020
IEC 61631:2020 Test method for the mechanical strength of cores made of magnetic oxides
5/7/2020 - PDF - English - IEC
Learn More€92.00 -
IEC 61631:2020
IEC 61631:2020 Test method for the mechanical strength of cores made of magnetic oxides
5/7/2020 - PDF - English, French - IEC
Learn More€92.00 -
IEC 61631:2020 + Redline
IEC 61631:2020 (Redline version) Test method for the mechanical strength of cores made of magnetic oxides
5/7/2020 - PDF - English - IEC
Learn More€120.00 -
€116.33
-
NF EN IEC 63093-3, C93-093-3 (05/2020)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3 : half pot-cores made of ferrite for inductive proximity switches
5/1/2020 - Paper - French - AFNOR
Learn More€88.33 -
NF EN IEC 63093-2, C93-093-2 (05/2020)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2 : pot-cores for use in telecommunications, power supply, and filter applications - Noyaux ferrite - Lignes directrices relatives aux dimensions et limites des irrégularités de surface - Partie 2 : Circuits magnétiques en pots utilisés dans des applications de télécommunications, d'alimentation électrique et de filtre
5/1/2020 - Paper - French - AFNOR
Learn More€103.33 -
NF EN IEC 62024-2, C93-370-2 (05/2020)
High frequency inductive components - Electrical characteristics and measuring methods - Part 2 : rated current of inductors for DC to DC converters
5/1/2020 - Paper - French - AFNOR
Learn More€103.33 -
NF EN IEC 60401-1, C93-372-1 (05/2020)
Terms and nomenclature for cores made of magnetically soft ferrites - Part 1 : terms used for physical irregularities and reference of dimensions
5/1/2020 - Paper - French - AFNOR
Learn More€116.33 -
BS EN IEC 63093-5:2018
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities EP-cores associated parts for use in inductors transformers
4/24/2020 - PDF - English - BSI
Learn More€250.00 -
BS EN IEC 61293:2020
Marking of electrical equipment with ratings related to electrical supply. Safety requirements
4/17/2020 - PDF - English - BSI
Learn More€250.00 -
IEC 63093-1:2020
IEC 63093-1:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
4/16/2020 - PDF - English, French - IEC
Learn More€92.00 -
IEC 63093-9:2020
IEC 63093-9:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores
4/16/2020 - PDF - English, French - IEC
Learn More€270.00 -
IEC 60401-1:2020
IEC 60401-1:2020 Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions
4/14/2020 - PDF - English - IEC
Learn More€219.00 -
IEC 60401-1:2020
IEC 60401-1:2020 Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions
4/14/2020 - PDF - English, French - IEC
Learn More€219.00 -
IEC 60401-1:2020 + Redline
IEC 60401-1:2020 (Redline version) Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions
4/14/2020 - PDF - English - IEC
Learn More€284.00 -
IEC 62024-2:2020
IEC 62024-2:2020 High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters
3/31/2020 - PDF - English, French - IEC
Learn More€132.00 -
IEC 62024-2:2020 + Redline
IEC 62024-2:2020 (Redline version) High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters
3/31/2020 - PDF - English - IEC
Learn More€173.00 -
IEC 63093-2:2020
IEC 63093-2:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications
3/27/2020 - PDF - English, French - IEC
Learn More€173.00 -
IEC 63093-3:2020
IEC 63093-3:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches
3/27/2020 - PDF - English, French - IEC
Learn More€92.00 -
BS EN 61360-1:2017 + Redline
Tracked Changes. Standard data element types with associated classification scheme Definitions. Principles and methods
2/26/2020 - PDF - English - BSI
Learn More€586.00 -
BS EN IEC 63093-14:2019 + Redline
Tracked Changes. Ferrite cores. Guidelines on dimensions and the limits of surface irregularities EFD-cores
2/24/2020 - PDF - English - BSI
Learn More€326.00 -
DIN EN IEC 63093-13:2019-12
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores (IEC 63093-13:2019), German version EN IEC 63093-13:2019.
12/1/2019 - PDF - German - DIN
Learn More€99.35 -
DIN EN IEC 63093-14:2019-12
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores (IEC 63093-14:2019), German version EN IEC 63093-14:2019.
12/1/2019 - PDF - German - DIN
Learn More€99.35 -
DIN EN IEC 63093-12:2019-12
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 12: Ring-cores (IEC 63093-12:2019), German version EN IEC 63093-12:2019.
12/1/2019 - PDF - German - DIN
Learn More€92.62 -
UNE-EN IEC 62025-2:2019
High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics (Endorsed by Asociación Española de Normalización in December of 2019.)
12/1/2019 - PDF - English - AENOR
Learn More€71.00 -
VG 95214-5:2019-12
Test methods of components - Part 5: Testing of junctions with heat shrinkable components, Text in German and English
12/1/2019 - PDF - English, German - DIN
Learn More€99.35 -
BS EN IEC 62025-2:2019
High frequency inductive components. Non-electrical characteristics and measuring methods Test for non-electrical
11/19/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN IEC 63044-5-2:2019
Home and Building Electronic Systems (HBES) Automation Control (BACS) EMC requirements for HBES/BACS used in residential, commercial light-industrial environments
11/18/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN IEC 60904-7:2019
Photovoltaic devices Computation of the spectral mismatch correction for measurements photovoltaic
11/5/2019 - PDF - English - BSI
Learn More€180.00 -
NF EN IEC 62025-2, C93-371-2 (11/2019)
High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2 : test methods for non-electrical characteristics
11/1/2019 - Paper - French - AFNOR
Learn More€103.00 -
DIN EN IEC 63093-4:2019-11
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores (IEC 63093-4:2019), German version EN IEC 63093-4:2019.
11/1/2019 - PDF - German - DIN
Learn More€115.33 -
UNE-EN IEC 61333:2019
Marking on ferrite cores (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN IEC 60276:2019
Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More€83.00 -
UNE-EN IEC 62474:2019
Material declaration for products of and for the electrotechnical industry (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More€78.00 -
€151.00
-
€72.00
-
BS EN IEC 60276:2019
Carbon brushes, brush holders, commutators and slip-rings. Definitions and nomenclature
9/30/2019 - PDF - English - BSI
Learn More€331.00 -
IEC 62025-2:2019
IEC 62025-2:2019 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics
9/20/2019 - PDF - English, French - IEC
Learn More€173.00 -
IEC 62025-2:2019 + Redline
IEC 62025-2:2019 (Redline version) High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics
9/20/2019 - PDF - English - IEC
Learn More€224.00 -
BS EN IEC 63093-4:2019
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities RM-cores
9/11/2019 - PDF - English - BSI
Learn More€293.00 -
BS EN IEC 63093-13:2019
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities PQ-cores
9/5/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN IEC 63093-6:2018
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities ETD-cores for use in power supplies
9/3/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN IEC 63093-8:2018
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities E-cores
9/3/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN IEC 63093-14:2019
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities EFD-cores
8/14/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN IEC 63093-12:2019
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities Ring-cores
8/14/2019 - PDF - English - BSI
Learn More€250.00 -
ASTM A1102-19
Standard Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets
8/1/2019 - PDF - English - ASTM
Learn More€51.00 -
ASTM A1102-19 + Redline
Standard Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets
8/1/2019 - PDF - English - ASTM
Learn More€61.00 -
ASTM A901-19
Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
8/1/2019 - PDF - English - ASTM
Learn More€54.00 -
ASTM A901-19 + Redline
Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
8/1/2019 - PDF - English - ASTM
Learn More€65.00 -
UNE-EN IEC 63093-12:2019
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 12: Ring-cores (Endorsed by Asociación Española de Normalización in August of 2019.)
8/1/2019 - PDF - English - AENOR
Learn More€75.00 -
UNE-EN IEC 63093-14:2019
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores (Endorsed by Asociación Española de Normalización in August of 2019.)
8/1/2019 - PDF - English - AENOR
Learn More€16.00 -
€46.00
-
NF EN IEC 63093-14, C93-093-14 (06/2019)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14 : EFD-cores
6/1/2019 - Paper - French - AFNOR
Learn More€88.00 -
NF EN IEC 63093-12, C93-093-12 (06/2019)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 12 : ring-cores
6/1/2019 - Paper - French - AFNOR
Learn More€88.33 -
UNE-EN IEC 63093-4:2019
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores (Endorsed by Asociación Española de Normalización in June of 2019.)
6/1/2019 - PDF - English - AENOR
Learn More€75.00 -
BS EN IEC 63093-7:2018
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities EER-cores
5/24/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN IEC 63093-11:2018
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities EC-cores for use in power supply applications
5/24/2019 - PDF - English - BSI
Learn More€250.00 -
UNE-EN IEC 63093-13:2019
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English - AENOR
Learn More€70.00 -
IEC 63093-12:2019
IEC 63093-12:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 12: Ring-cores
4/4/2019 - PDF - English, French - IEC
Learn More€132.00 -
IEC 63093-14:2019
IEC 63093-14:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores
4/4/2019 - PDF - English, French - IEC
Learn More€132.00 -
NF EN IEC 63093-13, C93-093-13 (04/2019)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13 : PQ-cores
4/1/2019 - Paper - French - AFNOR
Learn More€103.00 -
NF EN IEC 63093-4, C93-377-4 (04/2019)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4 : RM-cores
4/1/2019 - Paper - French - AFNOR
Learn More€116.33 -
DIN EN IEC 63093-5:2019-04
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: EP-cores and associated parts for use in inductors and transformers (IEC 63093-5:2018), German version EN IEC 63093-5:2018.
4/1/2019 - PDF - German - DIN
Learn More€92.62 -
DIN EN IEC 63093-6:2019-04
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 6: ETD-cores for use in power supplies (IEC 63093-6:2018), German version EN IEC 63093-6:2018.
4/1/2019 - PDF - German - DIN
Learn More€104.95 -
DIN EN IEC 63093-8:2019-04
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores (IEC 63093-8:2018), German version EN IEC 63093-8:2018.
4/1/2019 - PDF - German - DIN
Learn More€104.95 -
DIN EN IEC 63093-11:2019-04
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 11: EC-cores for use in power supply applications (IEC 63093-11:2018), German version EN IEC 63093-11:2018.
4/1/2019 - PDF - German - DIN
Learn More€99.35 -
IEC 63093-4:2019
IEC 63093-4:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores
3/8/2019 - PDF - English, French - IEC
Learn More€270.00 -
€348.00
-
IEC 63093-13:2019
IEC 63093-13:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores
2/5/2019 - PDF - English, French - IEC
Learn More€173.00 -
NF EN IEC 62474, C05-474 (02/2019)
Material declaration for products of and for the electrotechnical industry
2/1/2019 - Paper - French - AFNOR
Learn More€141.33 -
DIN EN IEC 62024-1:2019-02
High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor (IEC 62024-1:2017), German version EN IEC 62024-1:2018.
2/1/2019 - PDF - German - DIN
Learn More€99.35 -
DIN EN IEC 63093-7:2018-12
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores (IEC 63093-7:2018), German version EN IEC 63093-7:2018.
12/1/2018 - PDF - German - DIN
Learn More€99.35 -
IEC 62474:2018
IEC 62474:2018 Material declaration for products of and for the electrotechnical industry
11/30/2018 - PDF - English, French - IEC
Learn More€270.00 -
IEC 62474:2018 + Redline
IEC 62474:2018 (Redline version) Material declaration for products of and for the electrotechnical industry
11/30/2018 - PDF - English - IEC
Learn More€352.00 -
UNE-EN IEC 63093-8:2018
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores (Endorsed by Asociación Española de Normalización in November of 2018.)
11/1/2018 - PDF - English - AENOR
Learn More€72.00 -
ASTM A1009-18
Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications
10/1/2018 - PDF - English - ASTM
Learn More€48.00 -
ASTM A1009-18 + Redline
Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications
10/1/2018 - PDF - English - ASTM
Learn More€57.00 -
UNE-EN IEC 63093-6:2018
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 6: ETD-cores for use in power supplies (Endorsed by Asociación Española de Normalización in October of 2018.)
10/1/2018 - PDF - English - AENOR
Learn More€71.00