29.100.10 : Magnetic components
-
24/30490996 DC:2024
BS EN 63093-9. Ferrite cores. Guidelines on dimensions and the limits of surface irregularities Part 9. Planar cores
4/10/2024 - PDF - English - BSI
Learn More€24.00 -
24/30489392 DC:2024
BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
3/28/2024 - PDF - English - BSI
Learn More€24.00 -
BS EN IEC 60938-2-1:2024 + Redline
Tracked Changes. Fixed inductors for electromagnetic interference suppression Blank detail specification. Inductors which safety tests are required
2/13/2024 - PDF - English - BSI
Learn More€235.00 -
BS EN IEC 60938-2-1:2024
Fixed inductors for electromagnetic interference suppression Blank detail specification. Inductors which safety tests are required
1/24/2024 - PDF - English - BSI
Learn More€180.00 -
NF EN IEC 60938-2-1, C93-380-2-1 (01/2024)
Inductances fixes d'antiparasitage - Partie 2-1 : spécification particulière-cadre - Inductances exigeant des essais de sécurité
1/1/2024 - Paper - French - AFNOR
Learn More€88.33 -
24/30485429 DC:2023
BS EN IEC 63093-4 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 4: RM-cores
12/29/2023 - PDF - English - BSI
Learn More€24.00 -
24/30485433 DC:2023
BS EN IEC 63093-5 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 5: EP-cores associated parts for use in inductors transformers
12/29/2023 - PDF - English - BSI
Learn More€24.00 -
24/30485437 DC:2023
BS EN 63093-2 Ed2 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 2: Pot-cores for use in telecommunications, power supply, filter applications
12/29/2023 - PDF - English - BSI
Learn More€24.00 -
24/30485441 DC:2023
BS EN IEC 63093-10 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 10: PM-cores associated parts
12/29/2023 - PDF - English - BSI
Learn More€24.00 -
IEC 60938-2-1:2023
IEC 60938-2-1:2023 Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required
12/6/2023 - PDF - English, French - IEC
Learn More€132.00 -
ASTM A1101-23
Standard Specification for Sintered and Fully Dense Neodymium Iron Boron (NdFeB) Permanent Magnets
12/1/2023 - PDF - English - ASTM
Learn More€66.00 -
ASTM A1101-23 + Redline
Standard Specification for Sintered and Fully Dense Neodymium Iron Boron (NdFeB) Permanent Magnets
12/1/2023 - PDF - English - ASTM
Learn More€79.00 -
€24.00
-
23/30482635 DC:2023
BS IEC 63182-6. Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities Part 6. EQ - cores
11/7/2023 - PDF - English - BSI
Learn More€24.00 -
23/30482638 DC:2023
BS EN IEC 63182-7. Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities Part 7. EER. cores
11/7/2023 - PDF - English - BSI
Learn More€24.00 -
23/30482641 DC:2023
BS EN IEC 63182-8. Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities Part 8. U-cores
11/7/2023 - PDF - English - BSI
Learn More€24.00 -
23/30481375 DC:2023
BS EN IEC 63093-15 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities Part 15. U-cores
10/13/2023 - PDF - English - BSI
Learn More€24.00 -
UNE-EN IEC 63300:2023
Test methods for electrical and magnetic properties of magnetic powder cores (Endorsed by Asociación Española de Normalización in October of 2023.)
10/6/2023 - PDF - English - AENOR
Learn More€96.00 -
UNE-EN IEC 62044-3:2023
Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level (Endorsed by Asociación Española de Normalización in October of 2023.)
10/6/2023 - PDF - English - AENOR
Learn More€88.00 -
BS EN IEC 62044-3:2023 + Redline
Tracked Changes. Cores made of soft magnetic materials. Measuring methods Magnetic properties at high excitation level
10/2/2023 - PDF - English - BSI
Learn More€454.00 -
DIN EN IEC 63182-5:2023-10
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: Cylinder-cores (IEC 63182-5:2021), German version EN IEC 63182-5:2022
10/1/2023 - PDF - German - DIN
Learn More€72.80 -
DIN EN IEC 62024-1:2023-10
High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor (IEC 51/1441/CDV:2023), German and English version prEN IEC 62024-1:2023
10/1/2023 - PDF - English, German - DIN
Learn More€115.33 -
23/30480007 DC:2023
BS EN IEC 60205. Calculation of the effective parameters of magnetic piece parts
9/20/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN IEC 62044-3:2023
Cores made of soft magnetic materials. Measuring methods Magnetic properties at high excitation level
9/7/2023 - PDF - English - BSI
Learn More€348.00 -
DIN EN IEC 63093-10:2023-09
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 10: PM-cores and associated parts (IEC 63093-10:2022), German version EN IEC 63093-10:2022.
9/1/2023 - PDF - German - DIN
Learn More€99.35 -
PR NF EN IEC 62024-1, C93-370-1PR (09/2023)
Composants inductifs à haute fréquence - Caractéristiques électriques et méthodes de mesure - Partie 1 : Inductance à puce de l'ordre du nanohenry
9/1/2023 - Paper - English, French - AFNOR
Learn More€97.50 -
NF EN IEC 62044-3, C93-369-3 (09/2023)
Noyaux en matériaux magnétiques doux - Méthodes de mesure - Partie 3 : propriétés magnétiques à niveau élevé d'excitation
9/1/2023 - Paper - French - AFNOR
Learn More€141.33 -
BS EN IEC 63300:2023
Test methods for electrical and magnetic properties of magnetic powder cores
8/30/2023 - PDF - English - BSI
Learn More€348.00 -
NF EN IEC 63300, C93-300 (08/2023)
Méthodes d'essai des propriétés électriques et magnétiques des noyaux en poudre magnétique
8/1/2023 - Paper - French - AFNOR
Learn More€153.67 -
DIN EN IEC 63182-3:2023-08
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: E-cores (IEC 63182-3:2021), German version EN IEC 63182-3:2022
8/1/2023 - PDF - German - DIN
Learn More€85.79 -
DIN EN IEC 63299:2023-08
Classification of magnetic powder cores (IEC 63299:2022), German version EN IEC 63299:2022
8/1/2023 - PDF - German - DIN
Learn More€85.79 -
23/30477066 DC:2023
BS EN IEC 62674-1. High frequency inductive component Part 1. Fixed surface mount inductors for use in electronic and telecommunication equipment
7/20/2023 - PDF - English - BSI
Learn More€24.00 -
IEC 62044-3:2023
IEC 62044-3:2023 Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level
7/7/2023 - PDF - English, French - IEC
Learn More€311.00 -
IEC 62044-3:2023 + Redline
IEC 62044-3:2023 (Redline version) Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level
7/7/2023 - PDF - English - IEC
Learn More€404.00 -
23/30476420 DC:2023
BS EN IEC 62024-3. High frequency inductive components. Electrical characteristics and measuring methods Part 3. AC loss measured by sinusoidal wave of inductors for DC-to-DC converters
7/5/2023 - PDF - English - BSI
Learn More€24.00 -
DIN EN IEC 63182-4:2023-07
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: Block-cores (IEC 63182-4:2021), German version EN IEC 63182-4:2022
7/1/2023 - PDF - German - DIN
Learn More€72.80 -
IEC 63300:2023
IEC 63300:2023 Test methods for electrical and magnetic properties of magnetic powder cores
6/27/2023 - PDF - English, French - IEC
Learn More€345.00 -
23/30441881 DC:2023
BS EN IEC/IEEE 61007-389. Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
6/6/2023 - PDF - English - BSI
Learn More€43.00 -
DIN EN IEC 62044-3:2023-06
Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level (IEC 51/1411/CD:2022), Text in German and English
6/1/2023 - PDF - English, German - DIN
Learn More€148.04 -
PR NF EN IEC 62024-2, C93-370-2PR (06/2023)
Composants inductifs à haute fréquence - Caractéristiques électriques et méthodes de mesure - Part 2 : courant assigné des bobines d'inductance pour les convertisseurs continu-continu
6/1/2023 - Paper - English, French - AFNOR
Learn More€88.50 -
23/30450435 DC:2023
BS EN IEC 62024-1. High frequency inductive components. Electrical characteristics and measuring methods Part 1. Nanohenry range chip inductor
5/25/2023 - PDF - English - BSI
Learn More€24.00 -
DIN EN IEC 61631:2022-12
Test method for the mechanical strength of cores made of magnetic oxides (IEC 61631:2020), German version EN IEC 61631:2020.
12/1/2022 - PDF - German - DIN
Learn More€99.35 -
DIN EN IEC 62024-2:2022-11
High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters (IEC 51/1409/CD:2022), Text in German and English
11/1/2022 - PDF - English, German - DIN
Learn More€99.35 -
€180.00
-
UNE-EN IEC 63093-10:2022
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 10: PM-cores and associated parts (Endorsed by Asociación Española de Normalización in July of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€68.00 -
UNE-EN IEC 63299:2022
Classification of magnetic powder cores (Endorsed by Asociación Española de Normalización in December of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€62.00 -
€88.33
-
BS EN IEC 63093-10:2022 + Redline
Tracked Changes. Ferrite cores. Guidelines on dimensions and the limits of surface irregularities PM-cores associated parts
9/29/2022 - PDF - English - BSI
Learn More€326.00 -
IEC 63299:2022
IEC 63299:2022 Classification of magnetic powder cores
9/15/2022 - PDF - English, French - IEC
Learn More€46.00 -
BS EN IEC 63093-10:2022
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities PM-cores associated parts
8/4/2022 - PDF - English - BSI
Learn More€250.00 -
DIN EN IEC 63182-2:2022-08
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Ring-cores (IEC 63182-2:2020), German version EN IEC 63182-2:2020
8/1/2022 - PDF - German - DIN
Learn More€79.72 -
DIN SPEC 91411:2022-08
Requirements for the technical representation of magnetic measurement scales in design drawings
8/1/2022 - PDF - German - DIN
Learn More€0.00 -
NF EN IEC 63093-8, C93-093-8 (07/2022)
Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 8 : noyaux E
7/1/2022 - Paper - French - AFNOR
Learn More€116.33 -
BS EN IEC 63182-4:2022
Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities Block-cores
6/23/2022 - PDF - English - BSI
Learn More€180.00 -
BS EN IEC 63182-5:2022
Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities Cylinder-cores
6/23/2022 - PDF - English - BSI
Learn More€180.00 -
22/30450153 DC:2022
BS EN 62044-3. Cores made of soft magnetic materials. Measuring methods Part 3. Magnetic properties at high excitation level
5/26/2022 - PDF - English - BSI
Learn More€24.00 -
NF EN IEC 63093-10, C93-093-10 (05/2022)
Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 10 : Noyaux PM et parties associées
5/1/2022 - Paper - French - AFNOR
Learn More€103.33 -
IEC 63093-10:2022
IEC 63093-10:2022 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 10: PM-cores and associated parts
4/21/2022 - PDF - English, French - IEC
Learn More€132.00 -
22/30440624 DC:2022
BS EN 62024-2. High frequency inductive components. Electrical characteristics and measuring methods Part 2. Rated current of inductors for DC-to-DC converters
3/4/2022 - PDF - English - BSI
Learn More€24.00 -
BS EN IEC 63182-3:2022
Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities E-cores
3/3/2022 - PDF - English - BSI
Learn More€250.00 -
DIN EN 62044-3 Berichtigung 1:2022-03
Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level (IEC 62044-3:2000/COR1:2021), German version EN 62044-3:2001/AC:2021-11
3/1/2022 - PDF - German - DIN
Learn More€0.00 -
DIN EN IEC 63300:2022-03
Test methods for electrical and magnetic properties of magnetic powder cores (IEC 51/1368/CD:2021), Text in German and English
3/1/2022 - PDF - English, German - DIN
Learn More€152.71 -
UNE-EN IEC 63182-4:2022
Magnetic powder cores - guidelines on dimensions and the limits of surface irregularities - Part 4: Block-cores (Endorsed by Asociación Española de Normalización in March of 2022.)
3/1/2022 - PDF - English - AENOR
Learn More€60.00 -
UNE-EN IEC 63182-5:2022
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: Cylinder-cores (Endorsed by Asociación Española de Normalización in March of 2022.)
3/1/2022 - PDF - English - AENOR
Learn More€62.00 -
UNE-EN IEC 63182-3:2022
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: E-cores (Endorsed by Asociación Española de Normalización in March of 2022.)
3/1/2022 - PDF - English - AENOR
Learn More€63.00 -
NF EN IEC 63182-3, C93-182-3 (02/2022)
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 3 : E-cores
2/1/2022 - Paper - French - AFNOR
Learn More€88.33 -
NF EN IEC 63182-5, C93-182-5 (01/2022)
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 5 : Cylinder-cores
1/1/2022 - Paper - French - AFNOR
Learn More€72.00 -
NF EN IEC 63182-4, C93-182-4 (01/2022)
Magnetic powder cores - guidelines on dimensions and the limits of surface irregularities - Part 4 : Block-cores
1/1/2022 - Paper - French - AFNOR
Learn More€72.00 -
IEC 63182-3:2021
IEC 63182-3:2021 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: E-cores
12/16/2021 - PDF - English, French - IEC
Learn More€92.00 -
UNE-EN 62044-3:2001/AC:2021-11
Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level (Endorsed by Asociación Española de Normalización in December of 2021.)
12/1/2021 - PDF - English - AENOR
Learn More€0.00 -
IEC 63182-4:2021
IEC 63182-4:2021 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: Block-cores
11/29/2021 - PDF - English, French - IEC
Learn More€46.00 -
IEC 63182-5:2021
IEC 63182-5:2021 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: Cylinder-cores
11/29/2021 - PDF - English, French - IEC
Learn More€46.00 -
21/30381086 DC:2021
BS EN IEC 60136. Dimensions, marking and testing of carbon brushes and dimensions of brush-holders for electrical machinery
11/5/2021 - PDF - English - BSI
Learn More€24.00 -
DIN EN IEC 62025-2:2021-11
High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics (IEC 62025-2:2019), German version EN IEC 62025-2:2019.
11/1/2021 - PDF - German - DIN
Learn More€110.00 -
DIN EN IEC 62024-2:2021-10
High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters (IEC 62024-2:2020), German version EN IEC 62024-2:2020.
10/1/2021 - PDF - German - DIN
Learn More€99.35 -
UNE-EN IEC 60938-1:2021
Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in October of 2021.)
10/1/2021 - PDF - English - AENOR
Learn More€75.00 -
UNE-EN IEC 60938-2:2021
Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification on Power Line Chokes (Endorsed by Asociación Española de Normalización in October of 2021.)
10/1/2021 - PDF - English - AENOR
Learn More€78.00 -
BS EN IEC 60938-2:2021
Fixed inductors for electromagnetic interference suppression Sectional specification on power line chokes
9/14/2021 - PDF - English - BSI
Learn More€293.00 -
DIN EN 62044-2 Berichtigung 1:2021-09
Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level (IEC 62044-2:2005/COR1:2021), German version EN 62044-2:2005/AC:2021-06
9/1/2021 - PDF - German - DIN
Learn More€0.00 -
BS EN IEC 60938-1:2021
Fixed inductors for electromagnetic interference suppression Generic specification
8/11/2021 - PDF - English - BSI
Learn More€293.00 -
NF EN IEC 60938-1, C93-380-1 (08/2021)
Fixed inductors for electromagnetic interference suppression - Part 1 : Generic specification - Inductances fixes d'antiparasitage - Partie 1 : Spécification générique.
8/1/2021 - Paper - French - AFNOR
Learn More€103.33 -
NF EN IEC 60938-2, C93-380-2 (08/2021)
Fixed inductors for electromagnetic interference suppression - Part 2 : Sectional specification on Power Line Chokes
8/1/2021 - Paper - French - AFNOR
Learn More€127.67 -
NF EN IEC 63093-6, C93-093-6 (08/2021)
Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 6 : noyaux ETD utilisés dans les alimentations électriques
8/1/2021 - Paper - French - AFNOR
Learn More€103.33 -
DIN EN IEC 60401-1:2021-08
Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions (IEC 60401-1:2020), German version EN IEC 60401-1:2020.
8/1/2021 - PDF - German - DIN
Learn More€110.00 -
IEC 60938-2:2021
IEC 60938-2:2021 Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification on power line chokes
7/20/2021 - PDF - English, French - IEC
Learn More€270.00 -
BS EN IEC 61007:2020
Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
7/12/2021 - PDF - English - BSI
Learn More€377.00 -
UNE-EN 62044-2:2005/AC:2021-06
Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level (Endorsed by Asociación Española de Normalización in July of 2021.)
7/1/2021 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN IEC 61007:2020/AC:2021-06
Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures (Endorsed by Asociación Española de Normalización in July of 2021.)
7/1/2021 - PDF - English - AENOR
Learn More€0.00 -
IEC 60938-1:2021
IEC 60938-1:2021 Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification
6/16/2021 - PDF - English, French - IEC
Learn More€270.00 -
BS EN 62044-2:2005
Cores made of soft magnetic materials. Measuring methods Magnetic properties at low excitation level
6/15/2021 - PDF - English - BSI
Learn More€293.00 -
DIN EN IEC 63182-1:2021-06
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification (IEC 63182-1:2020), German version EN IEC 63182-1:2020
6/1/2021 - PDF - German - DIN
Learn More€92.62 -
DIN EN IEC 61333:2021-04
Marking on ferrite cores (IEC 61333:2019), German version EN IEC 61333:2019.
4/1/2021 - PDF - German - DIN
Learn More€59.63 -
21/30415001 DC:2021
BS IEC 63300. Test methods for electrical and magnetic properties of magnetic powder cores
3/5/2021 - PDF - English - BSI
Learn More€24.00 -
DIN EN IEC 63093-9:2021-03
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores (IEC 63093-9:2020), German version EN IEC 63093-9:2020.
3/1/2021 - PDF - German - DIN
Learn More€115.33 -
DIN EN IEC 63093-2:2021-03
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications (IEC 63093-2:2020), German version EN IEC 63093-2:2020.
3/1/2021 - PDF - German - DIN
Learn More€99.35 -
DIN EN IEC 63093-3:2021-03
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches (IEC 63093-3:2020), German version EN IEC 63093-3:2020.
3/1/2021 - PDF - German - DIN
Learn More€85.79 -
DIN EN IEC 63093-1:2021-03
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification (IEC 63093-1:2020), German version EN IEC 63093-1:2020.
3/1/2021 - PDF - German - DIN
Learn More€85.79 -
ASTM A596/A596M-21
Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Point by Point (Ballistic) Method and Ring Specimens
2/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM A596/A596M-21 + Redline
Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Point by Point (Ballistic) Method and Ring Specimens
2/1/2021 - PDF - English - ASTM
Learn More€61.00 -
UNE-EN IEC 63182-2:2020
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Ring-cores (Endorsed by Asociación Española de Normalización in January of 2021.)
1/1/2021 - PDF - English - AENOR
Learn More€63.00 -
21/30414419 DC:2020
BS EN IEC 63182-3. Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities Part 3. E-cores
12/25/2020 - PDF - English - BSI
Learn More€24.00 -
PD IEC TR 63307:2020
Measurement methods of the complex relative permeability and permittivity of noise suppression sheet
12/7/2020 - PDF - English - BSI
Learn More€377.00 -
IEC TR 63307:2020
IEC TR 63307:2020 Measurement methods of the complex relative permeability and permittivity of noise suppression sheet
11/27/2020 - PDF - English - IEC
Learn More€397.00 -
BS EN IEC 63182-2:2020
Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities Ring-cores
11/18/2020 - PDF - English - BSI
Learn More€180.00 -
NF EN IEC 63182-2, C93-182-2 (11/2020)
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 2 : ring-cores
11/1/2020 - Paper - French - AFNOR
Learn More€88.33 -
UNE-EN IEC 61007:2020
Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures (Endorsed by Asociación Española de Normalización in October of 2020.)
10/1/2020 - PDF - English - AENOR
Learn More€132.00 -
IEC 63182-2:2020
IEC 63182-2:2020 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Ring-cores
9/29/2020 - PDF - English, French - IEC
Learn More€46.00 -
UNE-EN IEC 63182-1:2020
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€66.00 -
UNE-EN IEC 61631:2020
Test method for the mechanical strength of cores made of magnetic oxides (Endorsed by Asociación Española de Normalización in August of 2020.)
8/1/2020 - PDF - English - AENOR
Learn More€68.00 -
BS EN IEC 63182-1:2020
Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities General specification
7/29/2020 - PDF - English - BSI
Learn More€180.00 -
IEC 61007:2020
IEC 61007:2020 Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
7/20/2020 - PDF - English, French - IEC
Learn More€431.00 -
BS EN IEC 61631:2020
Test method for the mechanical strength of cores made of magnetic oxides
7/2/2020 - PDF - English - BSI
Learn More€180.00 -
NF EN IEC 63182-1, C93-182-1 (07/2020)
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1 : general specification
7/1/2020 - Paper - French - AFNOR
Learn More€88.33 -
UNE-EN IEC 62024-2:2020
High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€68.00 -
UNE-EN IEC 63093-2:2020
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€70.00 -
UNE-EN IEC 63093-3:2020
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN IEC 60401-1:2020
Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN IEC 63093-1:2020
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN IEC 63093-9:2020
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€76.00 -
BS EN IEC 63093-1:2020
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities General specification
6/18/2020 - PDF - English - BSI
Learn More€180.00 -
BS EN IEC 63093-9:2020
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities Planar cores
6/17/2020 - PDF - English - BSI
Learn More€293.00 -
BS EN IEC 60401-1:2020
Terms and nomenclature for cores made of magnetically soft ferrites used physical irregularities reference dimensions
6/9/2020 - PDF - English - BSI
Learn More€250.00 -
NF EN IEC 61631, C93-633 (06/2020)
Test method for the mechanical strength of cores made of magnetic oxides
6/1/2020 - Paper - French - AFNOR
Learn More€88.33 -
NF EN IEC 63093-1, C93-093-1 (06/2020)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1 : general specification
6/1/2020 - Paper - French - AFNOR
Learn More€88.33 -
NF EN IEC 63093-9, C93-093-9 (06/2020)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9 : planar cores
6/1/2020 - Paper - French - AFNOR
Learn More€116.33 -
BS EN IEC 63093-2:2020
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities Pot-cores for use in telecommunications, power supply, filter applications
5/27/2020 - PDF - English - BSI
Learn More€250.00 -
BS EN IEC 62024-2:2020
High frequency inductive components. Electrical characteristics and measuring methods Rated current of inductors for DC-to-DC converters
5/27/2020 - PDF - English - BSI
Learn More€250.00 -
IEC 63182-1:2020
IEC 63182-1:2020 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
5/27/2020 - PDF - English - IEC
Learn More€92.00 -
IEC 63182-1:2020
IEC 63182-1:2020 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
5/27/2020 - PDF - English, French - IEC
Learn More€92.00 -
BS EN IEC 63093-3:2020
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities Half pot-cores made ferrite for inductive proximity switches
5/26/2020 - PDF - English - BSI
Learn More€180.00 -
IEC 61631:2020
IEC 61631:2020 Test method for the mechanical strength of cores made of magnetic oxides
5/7/2020 - PDF - English - IEC
Learn More€92.00 -
IEC 61631:2020
IEC 61631:2020 Test method for the mechanical strength of cores made of magnetic oxides
5/7/2020 - PDF - English, French - IEC
Learn More€92.00 -
IEC 61631:2020 + Redline
IEC 61631:2020 (Redline version) Test method for the mechanical strength of cores made of magnetic oxides
5/7/2020 - PDF - English - IEC
Learn More€120.00 -
NF EN IEC 63093-3, C93-093-3 (05/2020)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3 : half pot-cores made of ferrite for inductive proximity switches
5/1/2020 - Paper - French - AFNOR
Learn More€88.33 -
NF EN IEC 63093-2, C93-093-2 (05/2020)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2 : pot-cores for use in telecommunications, power supply, and filter applications - Noyaux ferrite - Lignes directrices relatives aux dimensions et limites des irrégularités de surface - Partie 2 : Circuits magnétiques en pots utilisés dans des applications de télécommunications, d'alimentation électrique et de filtre
5/1/2020 - Paper - French - AFNOR
Learn More€103.33 -
NF EN IEC 62024-2, C93-370-2 (05/2020)
High frequency inductive components - Electrical characteristics and measuring methods - Part 2 : rated current of inductors for DC to DC converters
5/1/2020 - Paper - French - AFNOR
Learn More€103.33 -
NF EN IEC 60401-1, C93-372-1 (05/2020)
Terms and nomenclature for cores made of magnetically soft ferrites - Part 1 : terms used for physical irregularities and reference of dimensions
5/1/2020 - Paper - French - AFNOR
Learn More€116.33 -
BS EN IEC 63093-5:2018
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities EP-cores associated parts for use in inductors transformers
4/24/2020 - PDF - English - BSI
Learn More€250.00 -
IEC 63093-1:2020
IEC 63093-1:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
4/16/2020 - PDF - English, French - IEC
Learn More€92.00 -
IEC 63093-9:2020
IEC 63093-9:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores
4/16/2020 - PDF - English, French - IEC
Learn More€270.00 -
IEC 60401-1:2020
IEC 60401-1:2020 Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions
4/14/2020 - PDF - English - IEC
Learn More€219.00 -
IEC 60401-1:2020
IEC 60401-1:2020 Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions
4/14/2020 - PDF - English, French - IEC
Learn More€219.00 -
IEC 60401-1:2020 + Redline
IEC 60401-1:2020 (Redline version) Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions
4/14/2020 - PDF - English - IEC
Learn More€284.00 -
IEC 62024-2:2020
IEC 62024-2:2020 High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters
3/31/2020 - PDF - English, French - IEC
Learn More€132.00 -
IEC 62024-2:2020 + Redline
IEC 62024-2:2020 (Redline version) High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters
3/31/2020 - PDF - English - IEC
Learn More€173.00 -
IEC 63093-2:2020
IEC 63093-2:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications
3/27/2020 - PDF - English, French - IEC
Learn More€173.00 -
IEC 63093-3:2020
IEC 63093-3:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches
3/27/2020 - PDF - English, French - IEC
Learn More€92.00 -
BS EN IEC 63093-14:2019 + Redline
Tracked Changes. Ferrite cores. Guidelines on dimensions and the limits of surface irregularities EFD-cores
2/24/2020 - PDF - English - BSI
Learn More€326.00 -
DIN EN IEC 63093-13:2019-12
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores (IEC 63093-13:2019), German version EN IEC 63093-13:2019.
12/1/2019 - PDF - German - DIN
Learn More€99.35 -
DIN EN IEC 63093-14:2019-12
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores (IEC 63093-14:2019), German version EN IEC 63093-14:2019.
12/1/2019 - PDF - German - DIN
Learn More€99.35 -
DIN EN IEC 63093-12:2019-12
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 12: Ring-cores (IEC 63093-12:2019), German version EN IEC 63093-12:2019.
12/1/2019 - PDF - German - DIN
Learn More€92.62 -
UNE-EN IEC 62025-2:2019
High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics (Endorsed by Asociación Española de Normalización in December of 2019.)
12/1/2019 - PDF - English - AENOR
Learn More€71.00 -
BS EN IEC 62025-2:2019
High frequency inductive components. Non-electrical characteristics and measuring methods Test for non-electrical
11/19/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN IEC 60904-7:2019
Photovoltaic devices Computation of the spectral mismatch correction for measurements photovoltaic
11/5/2019 - PDF - English - BSI
Learn More€180.00 -
NF EN IEC 62025-2, C93-371-2 (11/2019)
High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2 : test methods for non-electrical characteristics
11/1/2019 - Paper - French - AFNOR
Learn More€103.00 -
DIN EN IEC 63093-4:2019-11
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores (IEC 63093-4:2019), German version EN IEC 63093-4:2019.
11/1/2019 - PDF - German - DIN
Learn More€115.33 -
UNE-EN IEC 61333:2019
Marking on ferrite cores (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More€60.00 -
€151.00
-
€72.00
-
IEC 62025-2:2019
IEC 62025-2:2019 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics
9/20/2019 - PDF - English, French - IEC
Learn More€173.00 -
IEC 62025-2:2019 + Redline
IEC 62025-2:2019 (Redline version) High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics
9/20/2019 - PDF - English - IEC
Learn More€224.00 -
BS EN IEC 63093-4:2019
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities RM-cores
9/11/2019 - PDF - English - BSI
Learn More€293.00 -
BS EN IEC 63093-13:2019
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities PQ-cores
9/5/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN IEC 63093-6:2018
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities ETD-cores for use in power supplies
9/3/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN IEC 63093-8:2018
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities E-cores
9/3/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN IEC 63093-14:2019
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities EFD-cores
8/14/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN IEC 63093-12:2019
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities Ring-cores
8/14/2019 - PDF - English - BSI
Learn More€250.00 -
ASTM A1102-19
Standard Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets
8/1/2019 - PDF - English - ASTM
Learn More€51.00 -
ASTM A1102-19 + Redline
Standard Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets
8/1/2019 - PDF - English - ASTM
Learn More€61.00 -
ASTM A901-19
Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
8/1/2019 - PDF - English - ASTM
Learn More€54.00 -
ASTM A901-19 + Redline
Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
8/1/2019 - PDF - English - ASTM
Learn More€65.00 -
UNE-EN IEC 63093-12:2019
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 12: Ring-cores (Endorsed by Asociación Española de Normalización in August of 2019.)
8/1/2019 - PDF - English - AENOR
Learn More€75.00 -
UNE-EN IEC 63093-14:2019
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores (Endorsed by Asociación Española de Normalización in August of 2019.)
8/1/2019 - PDF - English - AENOR
Learn More€16.00 -
€46.00
-
NF EN IEC 63093-14, C93-093-14 (06/2019)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14 : EFD-cores
6/1/2019 - Paper - French - AFNOR
Learn More€88.00 -
NF EN IEC 63093-12, C93-093-12 (06/2019)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 12 : ring-cores
6/1/2019 - Paper - French - AFNOR
Learn More€88.33 -
UNE-EN IEC 63093-4:2019
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores (Endorsed by Asociación Española de Normalización in June of 2019.)
6/1/2019 - PDF - English - AENOR
Learn More€75.00 -
BS EN IEC 63093-7:2018
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities EER-cores
5/24/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN IEC 63093-11:2018
Ferrite cores. Guidelines on dimensions and the limits of surface irregularities EC-cores for use in power supply applications
5/24/2019 - PDF - English - BSI
Learn More€250.00 -
UNE-EN IEC 63093-13:2019
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English - AENOR
Learn More€70.00 -
IEC 63093-12:2019
IEC 63093-12:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 12: Ring-cores
4/4/2019 - PDF - English, French - IEC
Learn More€132.00 -
IEC 63093-14:2019
IEC 63093-14:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores
4/4/2019 - PDF - English, French - IEC
Learn More€132.00 -
NF EN IEC 63093-13, C93-093-13 (04/2019)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13 : PQ-cores
4/1/2019 - Paper - French - AFNOR
Learn More€103.00 -
NF EN IEC 63093-4, C93-377-4 (04/2019)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4 : RM-cores
4/1/2019 - Paper - French - AFNOR
Learn More€116.33 -
DIN EN IEC 63093-5:2019-04
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: EP-cores and associated parts for use in inductors and transformers (IEC 63093-5:2018), German version EN IEC 63093-5:2018.
4/1/2019 - PDF - German - DIN
Learn More€92.62 -
DIN EN IEC 63093-6:2019-04
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 6: ETD-cores for use in power supplies (IEC 63093-6:2018), German version EN IEC 63093-6:2018.
4/1/2019 - PDF - German - DIN
Learn More€104.95 -
DIN EN IEC 63093-8:2019-04
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores (IEC 63093-8:2018), German version EN IEC 63093-8:2018.
4/1/2019 - PDF - German - DIN
Learn More€104.95 -
DIN EN IEC 63093-11:2019-04
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 11: EC-cores for use in power supply applications (IEC 63093-11:2018), German version EN IEC 63093-11:2018.
4/1/2019 - PDF - German - DIN
Learn More€99.35 -
IEC 63093-4:2019
IEC 63093-4:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores
3/8/2019 - PDF - English, French - IEC
Learn More€270.00 -
IEC 63093-13:2019
IEC 63093-13:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores
2/5/2019 - PDF - English, French - IEC
Learn More€173.00 -
DIN EN IEC 62024-1:2019-02
High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor (IEC 62024-1:2017), German version EN IEC 62024-1:2018.
2/1/2019 - PDF - German - DIN
Learn More€99.35 -
DIN EN IEC 63093-7:2018-12
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores (IEC 63093-7:2018), German version EN IEC 63093-7:2018.
12/1/2018 - PDF - German - DIN
Learn More€99.35 -
DIN EN 60205 Berichtigung 1:2018-12
Calculation of the effective parameters of magnetic piece parts (IEC 60205:2016/COR1:2018), German version EN 60205:2017/AC:2018-09
12/1/2018 - PDF - German - DIN
Learn More€0.00 -
DIN IEC 60740-2 Berichtigung 1:2018-12
Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials (IEC 60740-2:1993), Corrigendum 1
12/1/2018 - PDF - German - DIN
Learn More€0.00 -
18/30372769 DC:2018
BS IEC 63182-1. Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities Part 1. General specification
11/7/2018 - PDF - English - BSI
Learn More€24.00 -
UNE-EN IEC 63093-8:2018
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores (Endorsed by Asociación Española de Normalización in November of 2018.)
11/1/2018 - PDF - English - AENOR
Learn More€72.00 -
ASTM A1009-18
Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications
10/1/2018 - PDF - English - ASTM
Learn More€48.00 -
ASTM A1009-18 + Redline
Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications
10/1/2018 - PDF - English - ASTM
Learn More€57.00 -
UNE-EN IEC 63093-6:2018
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 6: ETD-cores for use in power supplies (Endorsed by Asociación Española de Normalización in October of 2018.)
10/1/2018 - PDF - English - AENOR
Learn More€71.00 -
UNE-EN IEC 63093-11:2018
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 11: EC-cores for use in power supply applications (Endorsed by Asociación Española de Normalización in October of 2018.)
10/1/2018 - PDF - English - AENOR
Learn More€57.00