29.100 : Components for electrical equipment
-
IEC 62025-1:2007
IEC 62025-1:2007 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment
5/15/2007 - PDF - English - IEC
Learn More€92.00 -
UNE-EN 60938-2:1999/A1:2007
Fixed inductors for electromagnetic interference suppression -- Part 2: Sectional specification (IEC 60938-2:1999/A1:2006). (Endorsed by AENOR in May of 2007.)
5/1/2007 - PDF - English - AENOR
Learn More€58.00 -
UNE-EN 60512-12-1:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method (IEC 60512-12-1:2006).
2/7/2007 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN 60512-12-1:2007
Connectors for electronic equipment - Tests and measurements -- Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method (IEC 60512-12-1:2006).
2/7/2007 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN 60512-14-2:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006).
2/7/2007 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN 60512-14-2:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006).
2/7/2007 - PDF - English - AENOR
Learn More€58.80 -
UNE-EN 60512-14-4:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006).
2/7/2007 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 60512-14-4:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006).
2/7/2007 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN 60512-14-5:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006).
2/7/2007 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN 60512-14-5:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006).
2/7/2007 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN 60512-14-6:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006).
2/7/2007 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN 60512-14-6:2007
Connectors for electronic equipment - Tests and measurements -- Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006).
2/7/2007 - PDF - English - AENOR
Learn More€55.20 -
€50.18
-
JIS C 2560-3-1:2006 (R2016)
Cores made of ferrite - Part 3-1: Dimensions and surface irregularities - E cores
11/20/2006 - PDF - Japanese - JSA
Learn More€36.27 -
NF EN 62317-9, C93-357-9 (11/2006)
Ferrite cores - Dimensions - Part 9 : planar cores - Noyaux ferrites
11/1/2006 - Paper - English - AFNOR
Learn More€79.50 -
PR NF EN 62317-9/A1, C93-357-9/A1PR (09/2006)
Ferrite cores - Dimensions - Part 9 : planar cores - Noyaux de ferrite
9/1/2006 - Paper - English - AFNOR
Learn More€25.50 -
UNE-EN 60556:2006
Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties
9/1/2006 - PDF - English - AENOR
Learn More€94.00 -
UNE-EN 62333-1:2006
Noise suppression sheet for digital devices and equipment -- Part 1: Definitions and general properties (IEC 62333-1:2006) (Endorsed by AENOR in September of 2006.)
9/1/2006 - PDF - English - AENOR
Learn More€15.00 -
UNE-EN 62333-2:2006
Noise suppression sheet for digital devices and equipment -- Part 2: Measuring methods (IEC 62333-2:2006 ) (Endorsed by AENOR in September of 2006.)
9/1/2006 - PDF - English - AENOR
Learn More€68.00 -
BS EN 62333-1:2006
Noise suppression sheet for digital devices and equipment Definitions general properties
8/31/2006 - PDF - English - BSI
Learn More€151.00 -
NF EN 50419, C04-230 (06/2006)
Marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE)
6/1/2006 - Paper - French - AFNOR
Learn More€72.00 -
IEC 62333-2:2006
IEC 62333-2:2006 Noise suppression sheet for digital devices and equipment - Part 2: Measuring methods
5/23/2006 - PDF - English, French - IEC
Learn More€173.00 -
IEC 62333-2:2006
IEC 62333-2:2006 Noise suppression sheet for digital devices and equipment - Part 2: Measuring methods
5/23/2006 - PDF - English - IEC
Learn More€173.00 -
IEC 62333-1:2006
IEC 62333-1:2006 Noise suppression sheet for digital devices and equipment - Part 1: Definitions and general properties
5/23/2006 - PDF - English - IEC
Learn More€23.00 -
DIN EN 60740-1:2006-05
Laminations for transformers and inductors - Part 1: Mechanical and electrical characteristics (IEC 60740-1:2005); German version EN 60740-1:2005
5/1/2006 - PDF - German - DIN
Learn More€136.82 -
IEC 60556:2006
IEC 60556:2006 Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties
4/27/2006 - PDF - English - IEC
Learn More€345.00 -
IEC 60556:2006
IEC 60556:2006 Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties
4/27/2006 - PDF - English, French - IEC
Learn More€345.00 -
DIN EN 62044-2:2006-01
Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level (IEC 62044-2:2005); German version EN 62044-2:2005
1/1/2006 - PDF - German - DIN
Learn More€104.95 -
BS EN 60740-1:2005
Laminations for transformers and inductors Mechanical electrical characteristics
12/23/2005 - PDF - English - BSI
Learn More€348.00 -
UNE-EN 60740-1:2005
Laminations for transformers and inductors -- Part 1: Mechanical and electrical characteristics (Endorsed by AENOR in December of 2005.)
12/1/2005 - PDF - English - AENOR
Learn More€96.00 -
DIN EN 61360-4:2005-11
Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes (IEC 61360-4:2005), German version EN 61360-4:2005, text in English.
11/1/2005 - PDF - English - DIN
Learn More€399.44 -
UNE-EN 62044-2:2005
Cores made of soft magnetic materials - Measuring methods -- Part 2: Magnetic properties at low excitation level (Endorsed by AENOR in September of 2005.)
9/1/2005 - PDF - English - AENOR
Learn More€72.00 -
IEC 60740-1:2005
IEC 60740-1:2005 Laminations for transformers and inductors - Part 1: Mechanical and electrical characteristics
8/9/2005 - PDF - English - IEC
Learn More€345.00 -
IEC 60740-1:2005
IEC 60740-1:2005 Laminations for transformers and inductors - Part 1: Mechanical and electrical characteristics
8/9/2005 - PDF - English, French - IEC
Learn More€345.00 -
UNE-IEC 60512-9:2005
Electromechanical components for electronic equipment, basic testing procedures and measuring methods - Part 9: Miscellaneous tests
5/18/2005 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-IEC 60512-5:2005
Electromechanical components for electronic equipment, basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests
5/18/2005 - PDF - Spanish - AENOR
Learn More€69.00 -
UNE-IEC 60512-7:2005
Electromechanical components for electronic equipment, basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests
5/18/2005 - PDF - Spanish - AENOR
Learn More€60.00 -
DIN EN 61360-5:2005-05
Standard data element types with associated classification scheme for electric components - Part 5: Extensions to the EXPRESS dictionary schema (IEC 61360-5:2004), German version EN 61360-5:2004, text English
5/1/2005 - PDF - English - DIN
Learn More€131.96 -
UNE 201003:2005
Enclosures and compartments of enclosures for the installation of the Power Control Switch.
3/9/2005 - PDF - Spanish - AENOR
Learn More€70.00 -
IEC 62044-2:2005
IEC 62044-2:2005 Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level
3/7/2005 - PDF - English, French - IEC
Learn More€270.00 -
UNE 21302-151:2004 (R2015)
International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
12/31/2004 - PDF - Spanish - AENOR
Learn More€126.00 -
JIS F 8007:2004 (R2015)
Shipbuilding - Electrical equipments - General requirements for degrees of protection and inspection of enclosures
12/20/2004 - PDF - Japanese - JSA
Learn More€46.02 -
DIN EN 61360-2:2004-12
Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema (IEC 61360-2:2002 + A1:2003), German version EN 61360-2:2002 + A1:2004, text English.
12/1/2004 - PDF - English - DIN
Learn More€163.74 -
IEC TS 62398:2004
IEC TS 62398:2004 Ferrite cores - Technology approval schedule (TAS)
10/12/2004 - PDF - English - IEC
Learn More€132.00 -
€0.00
-
€36.27
-
€46.02
-
BS EN 60749-22:2003
Semiconductor devices. Mechanical and climatic test methods Bond strength
7/4/2003 - PDF - English - BSI
Learn More€250.00 -
UNE-EN 61754-3:2002
Fibre optic connector interfaces -- Part 3: Type LSA connector family (Endorsed by AENOR in February of 2003.)
2/1/2003 - PDF - English - AENOR
Learn More€42.00 -
DIN EN 62044-1:2003-02
Cores made of soft magnetic materials - Measuring methods - Part 1: Generic specification (IEC 62044-1:2002); German version EN 62044-1:2002
2/1/2003 - PDF - German - DIN
Learn More€52.90 -
UNE-EN 62044-1:2002
Cores made of soft magnetic materials - Measuring methods -- Part 1: Generic specification (Endorsed by AENOR in January of 2003.)
1/1/2003 - PDF - English - AENOR
Learn More€28.00 -
€0.00
-
BS EN 62044-1:2002
Cores made of soft magnetic materials. Measuring methods Generic specification
10/28/2002 - PDF - English - BSI
Learn More€151.00 -
IEC 62044-1:2002
IEC 62044-1:2002 Cores made of soft magnetic materials - Measuring methods - Part 1: Generic specification
5/28/2002 - PDF - English, French - IEC
Learn More€23.00 -
ASTM A598/A598M-02(2022)
Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
1/1/2002 - PDF - English - ASTM
Learn More€60.00 -
ASTM A598/A598M-02(2022) + Redline
Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
1/1/2002 - PDF - English - ASTM
Learn More€72.00 -
DIN EN 62044-3:2001-12
Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level (IEC 62044-3:2000), German version EN 62044-3:2001
12/1/2001 - PDF - German - DIN
Learn More€92.62 -
BS IEC TR 62157:2001
Cylindrical machined carbon electrodes. Nominal dimensions
11/1/2001 - PDF - English - BSI
Learn More€151.00 -
UNE-EN 62044-3:2001
Cores made of soft magnetic materials - Measuring methods -- Part 3: Magnetic properties at high excitation level. (Endorsed by AENOR in October of 2001.)
10/1/2001 - PDF - English - AENOR
Learn More€72.00 -
NF EN 62044-3, C93-369-3 (09/2001)
Cores made of soft magnetic materials - Measuring methods - Part 3 : magnetic properties at high excitation level - Noyaux en matériaux magnétiques doux
9/1/2001 - Paper - French - AFNOR
Learn More€116.33 -
IEC 60050-151:2001
IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
7/31/2001 - PDF - English, French - IEC
Learn More€397.00 -
UNE-EN 60938-1:1999
Fixed inductors for electromagnetic interference suppression -- Part 1: Generic specification (Endorsed by AENOR in June of 2000.)
6/1/2000 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN 60938-2:1999
Fixed inductors for electromagnetic interference suppression -- Part 2: Sectional specification (Endorsed by AENOR in June of 2000.)
6/1/2000 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN 60938-2-1:1999
Fixed inductors for electromagnetic interference suppression -- Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D (Endorsed by AENOR in June of 2000.)
6/1/2000 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN 60938-2-2:1999
Fixed inductors for electromagnetic interference suppression - Part 2-2: Blank detail specification - Inductors for which safety tests are required (only) (Endorsed by AENOR in June of 2000.)
6/1/2000 - PDF - English - AENOR
Learn More€65.00 -
BS EN 60938-2-2:2000
Fixed inductors for electromagnetic interference suppression Blank detail specification. Inductors which safety tests are required (only) specification - electrical shock hazard protection
4/15/2000 - PDF - English - BSI
Learn More€151.00 -
ASTM A1013-00(2020)
Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
1/1/2000 - PDF - English - ASTM
Learn More€51.00 -
ASTM A1013-00(2020) + Redline
Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
1/1/2000 - PDF - English - ASTM
Learn More€61.00 -
DIN EN 61609:1999-12
Microwave ferrite components - Guide for the drafting of specifications (IEC 61609:1996), German version EN 61609:1999
12/1/1999 - PDF - German - DIN
Learn More€39.35 -
IEC 60938-2-2:1999
IEC 60938-2-2:1999 Fixed inductors for electromagnetic interference suppression - Part 2-2: Blank detail specification - Inductors for which safety tests are required (only)
10/29/1999 - PDF - English, French - IEC
Learn More€46.00 -
IEC 60938-2-2:1999
IEC 60938-2-2:1999 Fixed inductors for electromagnetic interference suppression - Part 2-2: Blank detail specification - Inductors for which safety tests are required (only)
10/29/1999 - PDF - English - IEC
Learn More€46.00 -
UNE-EN 61609:1999
MICROWAVE FERRITE COMPONENTS. GUIDE FOR THE DRAFTING OF SPECIFICATIONS (Endorsed by AENOR in June of 1999.)
6/1/1999 - PDF - English - AENOR
Learn More€42.00 -
DIN EN 50102/A1 DIN EN 62262/A1 VDE 0470-100/A1:1999-06
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code), Amendment A1, German version EN 50102:1995/prA1:1998
6/1/1999 - Paper - German - VDE
Learn More€14.40 -
BS EN 61609:1999
Microwave ferrite components. Guide for the drafting of specifications
3/17/1999 - PDF - English - BSI
Learn More€151.00 -
€32.50
-
DIN EN 125000:1998-11
Generic specification - Cores made of ferrite materials, German version EN 125000:1997
11/1/1998 - PDF - German - DIN
Learn More€72.80 -
DIN EN 61830:1998-10
Microwave ferrite components - Measuring methods for major properties (IEC 61830:1997), German version EN 61830:1998
10/1/1998 - PDF - German - DIN
Learn More€59.63 -
UNE-EN 61247:1997
PM-CORES MADE OF MAGNETIC OXIDES AND ASSOCIATED PARTS. DIMENSIONS (Endorsed by AENOR in October of 1998.)
10/1/1998 - PDF - English - AENOR
Learn More€63.00 -
€39.35
-
UNE-EN 61843:1997
MEASURING METHOD FOR THE LEVEL OF INTERMODULATION PRODUCTS GENERATED IN A GYROMAGNETIC DEVICE (Endorsed by AENOR in June of 1998.)
6/1/1998 - PDF - English - AENOR
Learn More€38.00 -
BS EN 61830:1998
Microwave ferrite components. Measuring methods for major properties
4/15/1998 - PDF - English - BSI
Learn More€180.00 -
BS EN 125000:1998
Harmonized system of quality assessment for electronic components. Generic specification: cores made of ferrite materials
3/15/1998 - PDF - English - BSI
Learn More€180.00 -
DIN EN 61843:1998-03
Measuring method for the level of intermodulation products generated in a gyromagnetic device (IEC 61843:1997); German version EN 61843:1997
3/1/1998 - PDF - German - DIN
Learn More€39.35 -
UNE-EN 61021-1:1997
LAMINATED CORE PACKAGES FOR TRANSFORMERS AND INDUCTORS USED IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT. PART 1: DIMENSIONS. (Endorsed by AENOR in December of 1997.)
12/1/1997 - PDF - English - AENOR
Learn More€38.00 -
UNE-EN 61021-2:1997
LAMINATED CORE PACKAGES FOR TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT. PART 2: ELECTRICAL CHARACTERISTICS FOR CORES USING YEE 2 LAMINATIONS (Endorsed by AENOR in December of 1997.)
12/1/1997 - PDF - English - AENOR
Learn More€60.00 -
DIN EN 61021-1:1997-11
Laminated core packages for transformers and inductors used in telecommunication and electronic equipment - Part 1: Dimensions (IEC 61021-1:1990); German version EN 61021-1:1997
11/1/1997 - PDF - German - DIN
Learn More€39.35 -
BS EN 61843:1997
Measuring method for the level of intermodulation products generated in a gyromagnetic device
10/15/1997 - PDF - English - BSI
Learn More€151.00 -
IEC 60635:1978/AMD1:1997
IEC 60635:1978/AMD1:1997 Amendment 1 - Toroidal strip-wound cores made of magnetically soft material
10/9/1997 - PDF - English, French - IEC
Learn More€12.00 -
DIN EN 61021-2:1997-10
Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Electrical characteristics for cores using YEE 2 laminations (IEC 61021-2:1995); German version EN 61021-2:1997
10/1/1997 - PDF - German - DIN
Learn More€52.90 -
DIN EN 50102 DIN EN 62262 VDE 0470-100:1997-09
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code); German version EN 50102:1995
9/1/1997 - Paper - German - VDE
Learn More€38.31 -
BS EN 61021-2:1997
Laminated core packages for transformers and inductors use in telecommunication electronic equipment Electrical characteristics cores using YEE 2 laminations
7/15/1997 - PDF - English - BSI
Learn More€180.00 -
IEC 61248-7:1997
IEC 61248-7:1997 Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high-frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure
6/24/1997 - PDF - English, French - IEC
Learn More€173.00 -
BS EN 61797-1:1997
Transformers and inductors for use in telecommunication electronic equipment. Main dimensions of coil formers Coil laminated cores
6/15/1997 - PDF - English - BSI
Learn More€250.00 -
IEC 61843:1997
IEC 61843:1997 Measuring method for the level of intermodulation products generated in a gyromagnetic device
4/28/1997 - PDF - English, French - IEC
Learn More€23.00 -
UTE C61-481, C61-481U (03/1997)
Electromechanical contactors for household and similar purposes with 63 A inferior In inferior or equal 125 A.
3/1/1997 - Paper - French - AFNOR
Learn More€40.33 -
BS EN 125500:1996
Harmonized system of quality assessment for electronic components. Sectional specification: magnetic oxide ring cores for interference suppression and low level signal transformer applications
12/15/1996 - PDF - English - BSI
Learn More€180.00 -
DIN EN 125500:1996-11
Sectional specification: Magnetic oxide ring cores for interference suppression and low level signal transformer applications; German version EN 125500:1996
11/1/1996 - PDF - German - DIN
Learn More€52.90 -
IEC 61797-1:1996
IEC 61797-1:1996 Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores
10/17/1996 - PDF - English, French - IEC
Learn More€173.00 -
IEC 60852-4:1996
IEC 60852-4:1996 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations
7/3/1996 - PDF - English, French - IEC
Learn More€132.00 -
IEC 61248-1:1996
IEC 61248-1:1996 Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification
6/6/1996 - PDF - English, French - IEC
Learn More€219.00 -
IEC 61248-3:1996
IEC 61248-3:1996 Transformers and inductors for use in electronic andtelecommunication equipment - Part 3: Sectional specification forpower transformers on the basis of the capability approvalprocedure
6/6/1996 - PDF - English, French - IEC
Learn More€46.00 -
IEC 61248-2:1996
IEC 61248-2:1996 Transformers and inductors for use in electronic andtelecommunication equipment - Part 2: Sectional specification forsignal transformers on the basis of the capability approvalprocedure
6/6/1996 - PDF - English, French - IEC
Learn More€46.00 -
IEC 61248-4:1996
IEC 61248-4:1996 Transformers and inductors for use in electronic andtelecommunication equipment - Part 4: Sectional specification forpower transformers for switched mode power supplies (SMPS) on thebasis of the capability approval procedure
6/6/1996 - PDF - English, French - IEC
Learn More€173.00 -
IEC 61248-5:1996
IEC 61248-5:1996 Transformers and inductors for use in electronic andtelecommunication equipment - Part 5: Sectional specification forpulse transformers on the basis of the capability approvalprocedure
6/6/1996 - PDF - English, French - IEC
Learn More€46.00 -
IEC 61248-6:1996
IEC 61248-6:1996 Transformers and inductors for use in electronic andtelecommunication equipment - Part 6: Sectional specification forinductors on the basis of the capability approval procedure
6/6/1996 - PDF - English, French - IEC
Learn More€46.00 -
IEC 61609:1996
IEC 61609:1996 Microwave ferrite components - Guide for the drafting ofspecifications
2/7/1996 - PDF - English, French - IEC
Learn More€23.00 -
DIN IEC 60740-2:1995-08
Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials (IEC 60740-2:1993)
8/1/1995 - PDF - German - DIN
Learn More€72.80 -
IEC 61021-2:1995
IEC 61021-2:1995 Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Electrical characteristics for cores using YEE2 laminations
5/11/1995 - PDF - English, French - IEC
Learn More€92.00 -
€25.00
-
€29.12
-
IEC 60852-5:1994
IEC 60852-5:1994 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 5: Transformers and inductors using the series Q of C-cores
4/25/1994 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60740-2:1993
IEC 60740-2:1993 Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials
6/18/1993 - PDF - English, French - IEC
Learn More€132.00 -
DIN EN 125100:1993-02
Sectional specification: magnetic oxide cores for inductor applications; german version EN 125100:1991
2/1/1993 - PDF - German - DIN
Learn More€52.90 -
DIN EN 125200:1993-02
Sectional specification: magnetic oxide cores for linear transformers; german version EN 125200:1991
2/1/1993 - PDF - German - DIN
Learn More€52.90 -
DIN EN 125400:1993-02
Sectional specification: adjusters used with magnetic oxide cores for use in inductors and tuned transformers; german version EN 125400:1991
2/1/1993 - PDF - German - DIN
Learn More€39.35 -
DIN EN 125401:1993-02
Blank detail specification: adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers; german version EN 125401:1991
2/1/1993 - PDF - German - DIN
Learn More€39.35 -
IEC 60852-3:1992
IEC 60852-3:1992 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 3: Transformers and inductors using YUI-1 laminations
7/1/1992 - PDF - English, French - IEC
Learn More€46.00 -
IEC 60852-2:1992
IEC 60852-2:1992 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 2: Transformers and inductors using YEx-2 laminations for printed wiring board mounting
5/15/1992 - PDF - English, French - IEC
Learn More€46.00 -
IEC 60852-2:1992
IEC 60852-2:1992 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 2: Transformers and inductors using YEx-2 laminations for printed wiring board mounting
5/15/1992 - PDF - English - IEC
Learn More€46.00 -
BS 4727-1:Group 07:1991
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to telecommunications electronics Magnetic materials components
2/28/1991 - PDF - English - BSI
Learn More€377.00 -
BS EN 61021-1:1997
Laminated core packages for transformers and inductors use in telecommunication electronic equipment Specification dimensions
11/30/1990 - PDF - English - BSI
Learn More€151.00 -
€32.50
-
IEC 61021-1:1990
IEC 61021-1:1990 Laminated core packages for transformers and inductors used in telecommunication and electronic equipment - Part 1: Dimensions
8/31/1990 - PDF - English, French - IEC
Learn More€23.00 -
€32.50
-
UNE 20678-2-1:1989
INDUCTOR AND TRASFORMER CORES FOR TELECOMMUNICATIONS. BLANK DETAIL SPECIFICATION. MAGNETIC OXIDE CORES FOR INDUCTOR APPLICATIONS. ASSESSMENT LEVEL A
11/23/1989 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE 20678-2:1989
INDUCTOR AND TRANSFORMER CORES FOR TELECOMMUNICATIONS. SECTIONAL SPECIFICATION. MAGNETIC OXIDE CORES FOR INDUCTOR APPLICATIONS
11/14/1989 - PDF - Spanish - AENOR
Learn More€39.00 -
DIN 41640-54:1988-10
Measuring methods and testing procedures for electromechanical components; test 23a: transfer impedance
10/1/1988 - PDF - German - DIN
Learn More€32.34 -
DIN 41640-80:1988-05
Measuring methods and testing procedures for electromechanical components; test A: contact force, resilient female contacts
5/1/1988 - PDF - German - DIN
Learn More€32.34 -
BS 4999-147:1988
General requirements for rotating electrical machines Specification dimensions of brushes and brush-holders machinery
3/31/1988 - PDF - English - BSI
Learn More€293.00 -
€38.31
-
€32.34
-
DIN 41116-1:1987-12
Cylindrical metal casings for electrical engineering with thread pivot
12/1/1987 - PDF - German - DIN
Learn More€32.34 -
NF C93-333 (10/1987) (R2012)
Magnetic components. Surface mounting inductors. General requirements.
10/1/1987 - Paper - French - AFNOR
Learn More€116.33 -
UNE 20606-6:1986
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT, BASIC TESTING PROCEDURES AND MEASURING METHODS. CLIMATIC TESTS AND SOLDERING TESTS
11/15/1986 - PDF - Spanish - AENOR
Learn More€68.00 -
IEC 60852-1:1986
IEC 60852-1:1986 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 1: Transformers and inductors using YEI-1 laminations
7/30/1986 - PDF - English, French - IEC
Learn More€46.00 -
IEC 60852-1:1986
IEC 60852-1:1986 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 1: Transformers and inductors using YEI-1 laminations
7/30/1986 - PDF - Russian - IEC
Learn More€46.00 -
UNE 20677:1985
MEASURING METHODS FOR CYLINDER CORES, TUBE CORES AND SCREW CORES OF MAGNETIC OXIDES
12/15/1985 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE 20678-1:1985
INDUCTOR AND TRANSFORMER CORES FOR TELECOMUNICATIONS. PART 1: GENERIC SPECIFICATION
12/15/1985 - PDF - Spanish - AENOR
Learn More€60.00 -
DIN IEC 60773:1985-11
Test methods and apparatus for the measurement of the operational characteristics of brushes; identical with IEC 60773, edition 1983
11/1/1985 - PDF - German - DIN
Learn More€79.72 -
BS EN 125401:1997
Harmonized system of quality assessment for electronic components. Blank detail specification. Adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers
12/15/1984 - PDF - English - BSI
Learn More€151.00 -
BS 5938-1:1984
Cores for inductors and transformers telecommunications Methods of measurement
10/31/1984 - PDF - English - BSI
Learn More€377.00 -
DIN 17470:1984-10
Heating conductor alloys; technical delivery conditions for round and flat wire
10/1/1984 - PDF - German - DIN
Learn More€52.90 -
DIN 17470:1984-10
Heating conductor alloys; technical delivery conditions for round and flat wire
10/1/1984 - PDF - English - DIN
Learn More€66.07 -
IEC 60329:1984
IEC 60329:1984 Strip-wound cut cores of grain oriented silicon-iron alloy, used for electronic and telecommunication equipment
9/30/1984 - PDF - English, French - IEC
Learn More€270.00 -
BS EN 125400:1993
Harmonized system of quality assessment for electronic components: sectional specification: adjusters used with magnetic oxide cores for use in inductors and tuned transformers
9/28/1984 - PDF - English - BSI
Learn More€180.00 -
UNE 20673:1983
AXIAL LEAD CORES MADE OF MAGNETIC OXIDES OR IRON POWDER
12/15/1983 - PDF - Spanish - AENOR
Learn More€39.00 -
NF C93-336 (09/1983)
Components for electronic equipment. Magnetic cores and accessories. Accessories for ferrite cores.
9/1/1983 - Paper - French - AFNOR
Learn More€72.00 -
UNE 20606-8/2C:1983
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT, BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR TEST (MECHANICAL) AND MECHANICAL TEST ON CONTACTS AND TERMINATIONS
7/15/1983 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE 20588/1C:1983
DIMENSIONS OF TOROIDS MADE OF MAGNETIC OXIDES OR IRON POWDER
5/15/1983 - PDF - Spanish - AENOR
Learn More€14.00 -
DIN 42026-4:1982-09
Permanent magnet segments, limiting values of visible faults
9/1/1982 - PDF - German - DIN
Learn More€32.34 -
UNE 20606-8/1C:1982
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT, BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR (MECHANICAL) TESTS AND MECHANICAL TESTS ON CONTACTS AND TERMINATIONS
4/15/1982 - PDF - Spanish - AENOR
Learn More€27.00 -
IEC 60732:1982
IEC 60732:1982 Measuring methods for cylinder cores, tube cores and screw cores of magnetic oxides
1/1/1982 - PDF - English, French - IEC
Learn More€46.00 -
IEC 60732:1982
IEC 60732:1982 Measuring methods for cylinder cores, tube cores and screw cores of magnetic oxides
1/1/1982 - PDF - Russian - IEC
Learn More€46.00 -
DIN 40200:1981-10
Nominal value, limiting value, rated value, rating - concepts
10/1/1981 - PDF - German - DIN
Learn More€32.34 -
UNE 20606-8:1981
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT, BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR TESTS (MECHANICAL) AND MECHANICAL TESTS ON CONTACTS AND TERMINATIONS
9/15/1981 - PDF - Spanish - AENOR
Learn More€53.00 -
BS CECC 25300:1981
Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for power applications
8/31/1981 - PDF - English - BSI
Learn More€180.00 -
UNE 20605:1981
TOROIDAL STRIP-WOUND CORES MADE OF MAGNETICALLY SOFT MATERIAL
7/15/1981 - PDF - Spanish - AENOR
Learn More€27.00 -
NF C93-328 (07/1981) (R2011)
Components for electronic equipments. Magnetic cores and accessories. Accessories for laminations.
7/1/1981 - Paper - French - AFNOR
Learn More€127.67 -
BS 5938-2:1980
Cores for inductors and transformers telecommunications Guide to the drafting of performance specifications
12/31/1980 - PDF - English - BSI
Learn More€180.00 -
NF C93-332 (10/1980)
Electronic components. Transformers and inductors for telecommunication and professional electronic equipment. General requirements.
10/1/1980 - Paper - French - AFNOR
Learn More€153.67 -
DIN IEC 60413:1980-10
Test procedures for determining physical properties of brush materials for electrical machines
10/1/1980 - PDF - German - DIN
Learn More€65.89 -
BS 5935:1980
Specification for toroidal strip-wound cores made of magnetically soft material
8/29/1980 - PDF - English - BSI
Learn More€151.00 -
€22.99
-
DIN IEC 60136-3:1980-05
Dimensions of brushes and brush-holders for electrical machinery, part 3: IEC technical questionnaire for users of carbon brushes
5/1/1980 - PDF - German - DIN
Learn More€22.99 -
UTE C93-332, C93-332U (04/1980)
Components for electronic equipments. Transformers and inductors for telecommunication and professional electronic equipment.
4/1/1980 - Paper - French - AFNOR
Learn More€72.00 -
IEC TR 60668:1980
IEC TR 60668:1980 Dimensions of panel areas and cut-outs for panel and rack-mounted industrial-process measurement and control instruments
1/1/1980 - PDF - English, French - IEC
Learn More€23.00 -
UNE 20588:1978
DIMENSIONS OF TOROIDS MADE OF MAGNETIC OXIDES OR IRON POWDER
12/15/1978 - PDF - Spanish - AENOR
Learn More€17.00 -
BS EN 125200:1993
Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for linear transformers
11/30/1978 - PDF - English - BSI
Learn More€180.00 -
UNE 20027-1:1978 (R2012)
ROTATING ELECTRICAL MACHINES. DEFINITIONS AND NOMENCLATURE FOR CARBON BRUSHES, BRUSH-HOLDERS, COMMUTATORS AND SILIP-RINGS
6/15/1978 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE 20027-3:1978 (R2012)
ROTATING ELECTRICAL MACHINES. TEST PROCEDURES FOR DETERMINING PHYSICAL PROPERTIES OF BRUSH MATERIALS
4/15/1978 - PDF - Spanish - AENOR
Learn More€60.00 -
IEC 60635:1978
IEC 60635:1978 Toroidal strip-wound cores made of magnetically soft material
1/1/1978 - PDF - Russian - IEC
Learn More€46.00 -
IEC 60635:1978
IEC 60635:1978 Toroidal strip-wound cores made of magnetically soft material
1/1/1978 - PDF - English, French - IEC
Learn More€46.00 -
DIN 43021:1977-12
Carbon brushes for electric traction, dimensions, tolerances
12/1/1977 - PDF - German - DIN
Learn More€39.35 -
DIN 42026-1:1977-09
Permanent magnet segments, directives for selection of dimensions
9/1/1977 - PDF - German - DIN
Learn More€22.99 -
BS EN 125100:1993
Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for inductor applications
8/31/1977 - PDF - English - BSI
Learn More€180.00 -
BS 5347:1976
Specification for silicon-iron strip-wound cores for use in transformers and inductors for telecommunications and electronic equipment
5/28/1976 - PDF - English - BSI
Learn More€250.00 -
UTE C93-331/AM2, C93-331/AM2U (10/1975)
COMPONENTS FOR ELECTRONIC EQUIPMENT. MAGNETIC COMPONENTS AND FERRITE MATERIALS. INDUCTOR OF LOW SELF-INDUCTANCE VALUE.
10/1/1975 - Paper - French - AFNOR
Learn More€88.33 -
NF C93-326 (09/1975)
Components for electronic equipment. Magnetic cores and accessories. Accessories for strip-wound cut cores.
9/1/1975 - Paper - French - AFNOR
Learn More€127.67 -
DIN 43051:1975-01
Carbon brush-holders for electric traction, connection dimensions
1/1/1975 - PDF - German - DIN
Learn More€22.99 -
DIN 43054:1975-01
Contact pieces on carbon brushholders for electric traction
1/1/1975 - PDF - German - DIN
Learn More€22.99 -
DIN 43070-1:1974-12
Carbon brush holders for electric traction, check and tests
12/1/1974 - PDF - German - DIN
Learn More€22.99 -
DIN 43070-2:1974-12
Carbon brush holders for electric traction, measuring and test orders
12/1/1974 - PDF - German - DIN
Learn More€22.99 -
UTE C93-323, C93-323U (09/1974)
Components for electronic equipment. Magnetic cores and accessories. Pots cores made of ferromagnetic oxides for transformers. Particular requirements. Relevant article sheets.
9/1/1974 - Paper - French - AFNOR
Learn More€183.00 -
NF C93-331 (06/1973)
Components for electronic equipment. Magnetic components and ferrite materials. Inductor of low self-inductance value. General requirements.
6/1/1973 - Paper - French - AFNOR
Learn More€88.33 -
UTE C93-324/AM1, C93-324/AM1U (05/1973)
COMPONENTS FOR ELECTRONIC EQUIPMENT. MAGNETIC CORES AND ACCESSORIES. POTS CORES MADE OF FERROMAGNETIC OXIDES FOR INDUCTORS.
5/1/1973 - Paper - French - AFNOR
Learn More€72.00 -
UTE C93-331, C93-331U (05/1973)
Components for electronic equipment. Magnetic components and ferrite materials. Inductor of low self-inductance value. Relevant article sheets.
5/1/1973 - Paper - French - AFNOR
Learn More€116.33 -
UTE C93-324, C93-324U (09/1972)
Components for electronic equipment. Magnetic cores and accessories. Pots cores made of ferromagnetic oxides for inductors. Particular requirements. Article sheets.
9/1/1972 - Paper - French - AFNOR
Learn More€183.00 -
DIN 43661:1972-03
Foundation bars for indoor switchgear, design and mounting particulars
3/1/1972 - PDF - German - DIN
Learn More€22.99 -
IEC 60392:1972
IEC 60392:1972 Guide for the drafting of specifications for microwave ferrites
1/1/1972 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60392:1972
IEC 60392:1972 Guide for the drafting of specifications for microwave ferrites
1/1/1972 - PDF - Russian - IEC
Learn More€23.00 -
NF C93-355 (12/1968)
Components for electronic equipment. Intermediate frequency transformers used in broadcast receivers.
12/1/1968 - Paper - French - AFNOR
Learn More€88.33 -
NF C93-320 (06/1968)
Components for electronic equipment. Magnetic ferrites class "A" for entertainment applications.
6/1/1968 - Paper - French - AFNOR
Learn More€127.67 -
UNE-EN IEC 60938-2-1:2024
Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required (Endorsed by Asociación Española de Normalización in February of 2024.)
4/19/2024 - PDF - English - AENOR
Learn More€65.00