29.080 : Insulation

Items 401 to 600 of 883 total

Set Ascending Direction
per page

List  Grid 

  • IEC 60664-3:2016

    IEC 60664-3:2016 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
    11/4/2016 - PDF - English, French - IEC
    Learn More
    €173.00

  • IEC 60664-3:2016 + Redline

    IEC 60664-3:2016 (Redline version) Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
    11/4/2016 - PDF - English - IEC
    Learn More
    €224.00

  • DIN IEC/TS 62073 VDE V 0674-276:2016-11

    Guidance on the measurement of hydrophobicity of insulator surfaces (IEC/TS 62073:2016)
    11/1/2016 - Paper - German - VDE
    Learn More
    €61.54

  • DIN EN 60034-18-41/A1 VDE 0530-18-41/A1:2016-11

    Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests (IEC 2/1839/CD:2016)
    11/1/2016 - Paper - German - VDE
    Learn More
    €16.21

  • IEC TS 60815-4:2016

    IEC TS 60815-4:2016 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 4: Insulators for d.c. systems
    10/26/2016 - PDF - English - IEC
    Learn More
    €219.00

  • DIN IEC/TS 60815-3 VDE V 0674-256-3:2016-10

    Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Polymer insulators for a.c. systems (IEC/TS 60815-3:2008)
    10/1/2016 - Paper - German - VDE
    Learn More
    €61.54

  • DIN IEC/TS 60815-2 VDE V 0674-256-2:2016-10

    Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 2: Ceramic and glass insulators for a.c. systems (IEC/TS 60815-2:2008)
    10/1/2016 - Paper - German - VDE
    Learn More
    €65.60

  • DIN IEC/TS 62896 VDE V 0674-12:2016-10

    Hybrid insulators for a.c. and d.c. high-voltage applications - Definitions, test methods and acceptance criteria (IEC/TS 62896:2015)
    10/1/2016 - Paper - German - VDE
    Learn More
    €57.53

  • IEC TR 63040:2016

    IEC TR 63040:2016 Guidance on clearances and creepage distances in particular for distances equal to or less than 2 mm - Test results of research on influencing parameters
    9/26/2016 - PDF - English - IEC
    Learn More
    €270.00

  • TR C 60664-2-1:2016

    Insulation coordination for equipment within low-voltage system - Part 2-1: Application guide-Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing
    9/1/2016 - PDF - Japanese - JSA
    Learn More
    €97.50

  • BS EN 61466-1:2016

    Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V Standard strength classes and end fittings
    8/31/2016 - PDF - English - BSI
    Learn More
    €250.00

  • PD IEC/TS 62896:2015

    Hybrid insulators for a.c. and d.c. high-voltage applications. Definitions, test methods and acceptance criteria
    8/31/2016 - PDF - English - BSI
    Learn More
    €180.00

  • PD IEC/TS 61463:2016

    Bushings. Seismic qualification
    8/31/2016 - PDF - English - BSI
    Learn More
    €293.00

  • PD IEC/TS 62332-3:2016

    Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components Hermetic motor-compressors
    8/31/2016 - PDF - English - BSI
    Learn More
    €250.00

  • DIN EN 62231-1 VDE 0674-7-1:2016-08

    Composite station post insulators for substations with AC voltages greater than 1000 V up to 245 kV - Part 1: Dimensional, mechanical and electrical characteristics (IEC 62231-1:2015), German version EN 62231-1:2016
    8/1/2016 - Paper - German - VDE
    Learn More
    €61.54

  • DIN IEC/TS 60815-1 VDE V 0674-256-1:2016-08

    Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles (IEC/TS 60815-1:2008)
    8/1/2016 - Paper - German - VDE
    Learn More
    €121.28

  • UNE-EN 61557-8:2016

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
    7/27/2016 - PDF - Spanish - AENOR
    Learn More
    €93.00

  • UNE-EN 61557-8:2016

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
    7/27/2016 - PDF - English - AENOR
    Learn More
    €111.60

  • IEC TS 62332-3:2016

    IEC TS 62332-3:2016 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 3: Hermetic motor-compressors
    7/21/2016 - PDF - English, French - IEC
    Learn More
    €173.00

  • UNE-EN 62621:2016

    Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems
    7/20/2016 - PDF - Spanish - AENOR
    Learn More
    €73.00

  • UNE-EN 62621:2016

    Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems
    7/20/2016 - PDF - English - AENOR
    Learn More
    €87.60

  • IEC TS 61463:2016

    IEC TS 61463:2016 Bushings - Seismic qualification
    7/6/2016 - PDF - English - IEC
    Learn More
    €270.00

  • BS EN 61557-8:2015

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 500 d.c. Equipment for testing, measuring or monitoring of protective measures Insulation devices IT
    6/30/2016 - PDF - English - BSI
    Learn More
    €348.00

  • DIN EN 61952-1 VDE 0674-104-1:2016-06

    Insulators for overhead lines - Composite line post insulators for A.C systems with a nominal voltage greater than 1000 V - Part 1: Definitions, End fittings and Designations (IEC 36/377/CD:2016)
    6/1/2016 - Paper - German - VDE
    Learn More
    €24.83

  • IEC 61466-1:2016

    IEC 61466-1:2016 Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 1: Standard strength and end fittings
    5/18/2016 - PDF - English, French - IEC
    Learn More
    €173.00

  • UNE-EN 62231-1:2016

    Composite station post insulators for substations with ac voltages greater than 1 000 V UP TO 245 kV - Part 1: Dimensional, mechanical and electrical characteristics
    5/11/2016 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • UNE-EN 62231-1:2016

    Composite station post insulators for substations with ac voltages greater than 1 000 V UP TO 245 kV - Part 1: Dimensional, mechanical and electrical characteristics
    5/11/2016 - PDF - English - AENOR
    Learn More
    €81.60

  • DIN EN 61466-2/A2 VDE 0441-5/A2:2016-04

    Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 2: Dimensional and electrical characteristics (IEC 36/375/CD:2015)
    4/1/2016 - Paper - German - VDE
    Learn More
    €16.21

  • PD IEC/TS 62073:2016

    Guidance on the measurement of hydrophobicity of insulator surfaces
    3/31/2016 - PDF - English - BSI
    Learn More
    €250.00

  • UNE-CLC/TR 62662:2016 IN

    Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials
    3/16/2016 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • UNE-CLC/TR 62662:2016 IN

    Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials
    3/16/2016 - PDF - English - AENOR
    Learn More
    €81.60

  • IEC TS 62073:2016

    IEC TS 62073:2016 Guidance on the measurement of hydrophobicity of insulator surfaces
    2/10/2016 - PDF - English - IEC
    Learn More
    €132.00

  • BS EN 62231-1:2016

    Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV Dimensional, mechanical and electrical characteristics
    1/31/2016 - PDF - English - BSI
    Learn More
    €180.00

  • UNE-EN 50180-1:2015 (R2020)

    Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 1: General requirements for bushings
    12/23/2015 - PDF - Spanish - AENOR
    Learn More
    €88.00

  • UNE-EN 50180-1:2015 (R2020)

    Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 1: General requirements for bushings
    12/23/2015 - PDF - English - AENOR
    Learn More
    €105.60

  • UNE-EN 50180-2:2015 (R2020)

    Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components
    12/23/2015 - PDF - Spanish - AENOR
    Learn More
    €74.00

  • UNE-EN 50180-2:2015 (R2020)

    Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components
    12/23/2015 - PDF - English - AENOR
    Learn More
    €88.80

  • UNE-EN 50180-3:2015 (R2020)

    Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements for bushing fixations
    12/23/2015 - PDF - Spanish - AENOR
    Learn More
    €57.00

  • UNE-EN 50180-3:2015 (R2020)

    Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements for bushing fixations
    12/23/2015 - PDF - English - AENOR
    Learn More
    €68.40

  • NF EN 50180-1, C66-554-1 (12/2015)

    Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 1 : general requirements for bushings
    12/1/2015 - Paper - French - AFNOR
    Learn More
    €119.00

  • NF EN 50180-3, C66-554-3 (12/2015)

    Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3 : requirements for bushings fixations
    12/1/2015 - Paper - French - AFNOR
    Learn More
    €83.00

  • IEC TS 62896:2015

    IEC TS 62896:2015 Hybrid insulators for a.c. and d.c. for high-voltage applications - Definitions, test methods and acceptance criteria
    11/18/2015 - PDF - English - IEC
    Learn More
    €132.00

  • VG 88812:2015-11

    Earthing inserts for glands for shielded electric cables, Text in German and English
    11/1/2015 - PDF - English, German - DIN
    Learn More
    €65.89

  • BS EN 50180-1:2015

    Bushings above 1 kV up to 52 and from 250 A 3,15 kA for liquid filled transformers General requirements bushings
    10/31/2015 - PDF - English - BSI
    Learn More
    €293.00

  • BS EN 50180-2:2015

    Bushings above 1 kV up to 52 and from 250 A 3,15 kA for liquid filled transformers Requirement bushing components
    10/31/2015 - PDF - English - BSI
    Learn More
    €250.00

  • UNE-EN 60071-5:2015

    Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations
    10/21/2015 - PDF - Spanish - AENOR
    Learn More
    €131.00

  • UNE-EN 60071-5:2015

    Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations
    10/21/2015 - PDF - English - AENOR
    Learn More
    €157.20

  • IEC 62231-1:2015

    IEC 62231-1:2015 Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV - Part 1: Dimensional, mechanical and electrical characteristics
    10/13/2015 - PDF - English, French - IEC
    Learn More
    €92.00

  • DIN 89285:2015-09

    Glands for electrical cables and wires - Cable gland with degree of protection IP66 and IP68 for use on vessels, Text in German and English.
    9/1/2015 - PDF - English, German - DIN
    Learn More
    €65.89

  • BS EN 60534-2-1:2011

    Electrical safety in low voltage distribution systems up to 1 000 V AC and 500 DC. Equipment for testing, measuring or monitoring of protective measures Power metering devices (PMD)
    6/30/2015 - PDF - English - BSI
    Learn More
    €348.00

  • NF EN 61557-8, C42-198-8 (05/2015)

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8 : insulation monitoring devices for IT systems - Sécurité électrique dans les réseaux de distribution basse tension de 1 000 V c.a. et 1 500 V c.c.
    5/1/2015 - Paper - French - AFNOR
    Learn More
    €148.69

  • DIN EN 60071-5 VDE 0111-5:2015-05

    Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations (IEC 60071-5:2014), German version EN 60071-5:2015
    5/1/2015 - Paper - German - VDE
    Learn More
    €173.85

  • PD IEC/TR 61857-2:2015

    Electrical insulation systems. Procedures for thermal evaluation Selection of the appropriate test method and classification electrical systems
    4/13/2015 - PDF - English - BSI
    Learn More
    €151.00

  • IEC TR 61857-2:2015

    IEC TR 61857-2:2015 Electrical insulation systems - Procedures for thermal evaluation - Part 2: Selection of the appropriate test method for evaluation and classification of electrical insulation systems
    4/13/2015 - PDF - English - IEC
    Learn More
    €46.00

  • NF EN 61557-9, C42-198-9 (04/2015)

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9 : equipment for insulation fault location in IT systems - Sécurité électrique dans les réseaux de distribution basse tension de 1 000 V c.a. et 1 500 V c.c
    4/1/2015 - Paper - French - AFNOR
    Learn More
    €101.50

  • NF EN 61557-16, C42-198-16 (04/2015)

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 16 : equipment for testing the effectiveness of the protective measures of electrical equipment and/or medical electrical equipment - Sécurité électrique dans les réseaux de distribution basse tension de 1 000 V c.a. et 1 500 V c.c.
    4/1/2015 - Paper - French - AFNOR
    Learn More
    €103.00

  • UNE-EN 61557-9:2015

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems (Endorsed by AENOR in April of 2015.)
    4/1/2015 - PDF - English - AENOR
    Learn More
    €72.00

  • UNE-EN 61557-16:2015

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical equipment and/or medical electrical equipment (Endorsed by AENOR in April of 2015.)
    4/1/2015 - PDF - English - AENOR
    Learn More
    €68.00

  • IEC TS 61245:2015

    IEC TS 61245:2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems
    3/30/2015 - PDF - English - IEC
    Learn More
    €270.00

  • BS EN 61557-16:2015

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 500 d.c. Equipment for testing, measuring or monitoring of protective measures testing the effectiveness electrical equipment and/or medical
    2/28/2015 - PDF - English - BSI
    Learn More
    €250.00

  • IEC 60050-471:2007/AMD1:2015

    IEC 60050-471:2007/AMD1:2015 Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 471: Insulators
    2/25/2015 - PDF - English, French - IEC
    Learn More
    €12.00

  • IEC 60050-442:1998/AMD1:2015

    IEC 60050-442:1998/AMD1:2015 Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 442: Electrical accessories
    2/25/2015 - PDF - English, French - IEC
    Learn More
    €12.00

  • BS EN 60071-5:2015

    Insulation co-ordination Procedures for high-voltage direct current (HVDC) converter stations
    1/31/2015 - PDF - English - BSI
    Learn More
    €377.00

  • BS 3288-1:2014

    Insulator and conductor fittings for overhead power lines Performance general requirements
    12/31/2014 - PDF - English - BSI
    Learn More
    €293.00

  • IEC 61557-8:2014

    IEC 61557-8:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
    12/11/2014 - PDF - English, French - IEC
    Learn More
    €311.00

  • DIN EN 60305 VDE 0446-6:2014-12

    Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type (IEC 36/350/CD:2014)
    12/1/2014 - Paper - German - VDE
    Learn More
    €16.21

  • DIN EN 60433 VDE 0446-7:2014-12

    Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type (IEC 36/351/CD:2014)
    12/1/2014 - Paper - German - VDE
    Learn More
    €18.19

  • DIN IEC/TS 62332-2 VDE V 0302-995:2014-12

    Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified test (IEC/TS 62332-2:2014)
    12/1/2014 - Paper - German - VDE
    Learn More
    €74.10

  • UNE-EN 61936-1:2012/A1:2014

    Power installations exceeding 1 kV a.c. - Part 1: Common rules
    11/19/2014 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • UNE-EN 61936-1:2012/A1:2014

    Power installations exceeding 1 kV a.c. - Part 1: Common rules
    11/19/2014 - PDF - English - AENOR
    Learn More
    €81.60

  • NF EN 61557-15, C42-198-15 (11/2014)

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15 : functional saftey requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems - Sécurité électrique dans les réseaux de distribution basse tension de 1 000 v c.a. et 1 500 v c.c.
    11/1/2014 - Paper - French - AFNOR
    Learn More
    €183.00

  • DIN EN 61858-1 VDE 0302-30-1:2014-11

    Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS (IEC 61858-1:2014), German version EN 61858-1:2014
    11/1/2014 - Paper - German - VDE
    Learn More
    €87.98

  • DIN EN 61858-2 VDE 0302-30-2:2014-11

    Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2: Form-wound EIS (IEC 61858-2:2014), German version EN 61858-2:2014
    11/1/2014 - Paper - German - VDE
    Learn More
    €77.84

  • DIN EN 60034-18-41 VDE 0530-18-41:2014-11

    Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests (IEC 60034-18-41:2014), German version EN 60034-18-41:2014
    11/1/2014 - Paper - German - VDE
    Learn More
    €104.79

  • UNE-EN 61557-15:2014

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems (Endorsed by AENOR in October of 2014.)
    10/1/2014 - PDF - English - AENOR
    Learn More
    €111.00

  • DIN EN 60507 VDE 0448-1:2014-09

    Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems (IEC 60507:2013), German version EN 60507:2014
    9/1/2014 - Paper - German - VDE
    Learn More
    €98.49

  • NF EN 61936-1 COMPIL 1, C13-000-1COMPIL1 (08/2014)

    Installations électriques en courant alternatif de puissance supérieure à 1 kV - Partie 1 : règles communes - Texte compilé de la norme NF EN 61936-1 de juin 2014 et son amendement 1 d'août 2014.
    8/1/2014 - Paper - French - AFNOR
    Learn More
    €211.00

  • NF EN 61936-1/A1, C13-000-1/A1 (08/2014)

    Power installations exceeding 1 kV a.c. - Part 1 : common rules
    8/1/2014 - Paper - French - AFNOR
    Learn More
    €93.50

  • UNE-EN 60507:2014

    Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
    7/29/2014 - PDF - Spanish - AENOR
    Learn More
    €83.00

  • UNE-EN 60507:2014

    Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
    7/29/2014 - PDF - English - AENOR
    Learn More
    €99.60

  • IEC/IEEE 65700-19-03:2014

    IEC/IEEE 65700-19-03:2014 Bushings for DC application
    7/10/2014 - PDF - English, French - IEC
    Learn More
    €345.00

  • IEC/IEEE 65700-19-03:2014

    IEC/IEEE 65700-19-03:2014 Bushings for DC application
    7/10/2014 - PDF - English - IEC
    Learn More
    €345.00

  • IEEE/IEC 65700-19-03:2014

    IEC/IEEE International Standard -- Bushings for DC application
    7/10/2014 - PDF - English - IEEE
    Learn More
    €263.00

  • IEEE/IEC 65700-19-03:2014

    IEC/IEEE International Standard -- Bushings for DC application
    7/10/2014 - Paper - English - IEEE
    Learn More
    €327.00

  • DIN EN 50386/A1:2014-07

    Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers, German version EN 50386:2010/A1:2013.
    7/1/2014 - PDF - German - DIN
    Learn More
    €39.35

  • BS EN 61858-2:2014

    Electrical insulation systems. Thermal evaluation of modifications to an established electrical system (EIS) Form-wound EIS
    6/30/2014 - PDF - English - BSI
    Learn More
    €250.00

  • UNE-EN 61858-2:2014

    Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2: Form-wound EIS (Endorsed by AENOR in June of 2014.)
    6/1/2014 - PDF - English - AENOR
    Learn More
    €68.00

  • UNE-EN 61858-1:2014

    Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS (Endorsed by AENOR in June of 2014.)
    6/1/2014 - PDF - English - AENOR
    Learn More
    €72.00

  • BS EN 61557-15:2014

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 500 d.c. Equipment for testing, measuring or monitoring of protective measures Functional requirements insulation devices IT equipment fault location
    5/31/2014 - PDF - English - BSI
    Learn More
    €377.00

  • BS EN 61858-1:2014

    Electrical insulation systems. Thermal evaluation of modifications to an established electrical system (EIS) Wire-wound winding EIS
    5/31/2014 - PDF - English - BSI
    Learn More
    €293.00

  • PD IEC/TS 62332-2:2014

    Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components Simplified test
    5/31/2014 - PDF - English - BSI
    Learn More
    €250.00

  • NF EN 61557-14, C42-198-14 (05/2014)

    Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 14 : equipment for testing the safety of electrical equipment for machinery - Sécurité électrique dans les réseaux de distribution basse tension jusqu'à 1 000 V c.a. et 1 500 V d.c.
    5/1/2014 - Paper - French - AFNOR
    Learn More
    €88.33

  • NF EN 60507, C66-010 (05/2014)

    Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
    5/1/2014 - Paper - French - AFNOR
    Learn More
    €123.39

  • IEC TS 62332-2:2014

    IEC TS 62332-2:2014 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified test
    4/24/2014 - PDF - English, French - IEC
    Learn More
    €173.00

  • UNE-EN 62444:2014

    Cable glands for electrical installations
    4/9/2014 - PDF - Spanish - AENOR
    Learn More
    €74.00

  • UNE-EN 62444:2014

    Cable glands for electrical installations
    4/9/2014 - PDF - English - AENOR
    Learn More
    €88.80

  • DIN EN 62068 VDE 0302-91:2014-03

    Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses (IEC 62068:2013), German version EN 62068:2013
    3/1/2014 - Paper - German - VDE
    Learn More
    €53.63

  • BS EN 62444:2013

    Cable glands for electrical installations
    2/28/2014 - PDF - English - BSI
    Learn More
    €293.00

  • IEC 61557-15:2014

    IEC 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
    2/12/2014 - PDF - English, French - IEC
    Learn More
    €397.00

  • IEC 61858-2:2014

    IEC 61858-2:2014 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2: Form-wound EIS
    2/12/2014 - PDF - English, French - IEC
    Learn More
    €173.00

  • IEC 61858-1:2014

    IEC 61858-1:2014 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS
    2/12/2014 - PDF - English, French - IEC
    Learn More
    €270.00

  • IEC 60507:2013

    IEC 60507:2013 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
    12/13/2013 - PDF - English, French - IEC
    Learn More
    €270.00

  • UNE-EN 61557-10:2013

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures (Endorsed by AENOR in November of 2013.)
    11/1/2013 - PDF - English - AENOR
    Learn More
    €42.00

  • UNE-EN 61557-14:2013

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery (Endorsed by AENOR in November of 2013.)
    11/1/2013 - PDF - English - AENOR
    Learn More
    €63.00

  • VG 85538:2013-11

    Penetrations for pressure watertight electrical cables, for pressure hull installation, Text German and English
    11/1/2013 - PDF - English, German - DIN
    Learn More
    €79.72

  • VG 85533:2013-11

    Closing devices for penetrations for pressure watertight electric cables, Text in German and English
    11/1/2013 - PDF - English, German - DIN
    Learn More
    €65.89

  • VG 85532:2013-11

    Penetrations for pressure watertight electric cables, for tank and bulkhead installation, Text in German and English
    11/1/2013 - PDF - English, German - DIN
    Learn More
    €59.63

  • UNE-EN 62068:2013

    Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses (Endorsed by AENOR in November of 2013.)
    11/1/2013 - PDF - English - AENOR
    Learn More
    €62.00

  • BS EN 62068:2013

    Electrical insulating materials and systems. General method of evaluation of electrical endurance under repetitive voltage impulses
    10/31/2013 - PDF - English - BSI
    Learn More
    €180.00

  • UNE-EN 50386:2011/A1:2013 (R2022)

    Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers
    10/29/2013 - PDF - Spanish - AENOR
    Learn More
    €25.00

  • UNE-EN 50386:2011/A1:2013 (R2022)

    Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers
    10/29/2013 - PDF - English - AENOR
    Learn More
    €30.00

  • NF EN 61557-10, C42-198-10 (10/2013)

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10 : combined measuring equipment for testing, measuring and monitoring of protective measures - Sécurité électrique dans les réseaux de distribution basse tension jusqu'à 1 000 V c.a. et 1 500 V d.c.
    10/1/2013 - Paper - French - AFNOR
    Learn More
    €72.00

  • NF EN 60034-18-21, C51-318-21 (08/2013)

    Rotating electrical machines - Part 18-21 : functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification
    8/1/2013 - Paper - French - AFNOR
    Learn More
    €153.50

  • BS EN 61557-14:2013

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 500 d.c. Equipment for testing, measuring or monitoring of protective measures testing the electrical equipment machinery
    7/31/2013 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN 61557-10:2013

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 500 d.c. Equipment for testing, measuring or monitoring of protective measures Combined equipment
    7/31/2013 - PDF - English - BSI
    Learn More
    €151.00

  • UNE-EN 62217:2013

    Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
    7/31/2013 - PDF - Spanish - AENOR
    Learn More
    €74.00

  • UNE-EN 62217:2013

    Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
    7/31/2013 - PDF - English - AENOR
    Learn More
    €88.80

  • DIN EN 62217 VDE 0441-1000:2013-07

    Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria (IEC 62217:2012), German version EN 62217:2013
    7/1/2013 - Paper - German - VDE
    Learn More
    €77.84

  • DIN EN 60034-18-21 VDE 0530-18-21:2013-07

    Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification (IEC 60034-18-21:2012), German version EN 60034-18-21:2013
    7/1/2013 - Paper - German - VDE
    Learn More
    €110.67

  • UNE-EN 61936-1:2012/AC:2013

    Power installations exceeding 1 kV a.c. - Part 1: Common rules
    5/29/2013 - PDF - Spanish - AENOR
    Learn More
    €0.00

  • UNE-EN 61936-1:2012/AC:2013

    Power installations exceeding 1 kV a.c. - Part 1: Common rules
    5/29/2013 - PDF - English - AENOR
    Learn More
    €0.00

  • DIN IEC/TS 62332-1 VDE V 0302-994:2013-05

    Electrical Insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 1: General requirements (IEC/TS 62332-1:2011)
    5/1/2013 - Paper - German - VDE
    Learn More
    €61.54

  • BS EN 62217:2013

    Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
    4/30/2013 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN 60034-18-21:2013

    Rotating electrical machines Functional evaluation of insulation systems. Test procedures for wire-wound windings. Thermal and classification
    4/30/2013 - PDF - English - BSI
    Learn More
    €348.00

  • IEC 61557-10:2013

    IEC 61557-10:2013 Electrical safety in low voltage distribution systems up to 1 000 v a.c. and 1 500 v d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring and monitoring of protective measures
    4/29/2013 - PDF - English, French - IEC
    Learn More
    €46.00

  • UNE-IEC/TS 60815-1:2013 EX

    Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles
    4/24/2013 - PDF - Spanish - AENOR
    Learn More
    €99.00

  • UNE-IEC/TS 60815-2:2013 EX

    Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 2: Ceramic and glass insulators for a.c. systems
    4/24/2013 - PDF - Spanish - AENOR
    Learn More
    €69.00

  • UNE-IEC/TS 60815-3:2013 EX

    Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Polymer insulators for a.c. systems
    4/24/2013 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • IEC 62068:2013

    IEC 62068:2013 Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses
    3/11/2013 - PDF - English, French - IEC
    Learn More
    €92.00

  • BS EN 61557-13:2011

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 500 d.c. Equipment for testing, measuring or monitoring of protective measures Hand-held hand-manipulated current clamps sensors measurement leakage currents electrical
    1/31/2013 - PDF - English - BSI
    Learn More
    €250.00

  • UNE-IEC/TR 62730:2013 IN

    HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test
    1/23/2013 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • DIN EN 60034-18-31 VDE 0530-18-31:2013-01

    Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines (IEC 60034-18-31:2012), German version EN 60034-18-31:2012
    1/1/2013 - Paper - German - VDE
    Learn More
    €81.46

  • NF EN 60034-18-34, C51-318-34 (01/2013)

    Rotating electrical machines - Part 18-34 : functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems
    1/1/2013 - Paper - French - AFNOR
    Learn More
    €88.00

  • NF EN 62271-200, C64-471-200 (01/2013)

    High-voltage switchgear and controlgear - Part 200 : AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
    1/1/2013 - Paper - French - AFNOR
    Learn More
    €184.00

  • DIN EN 60034-18-34 VDE 0530-18-34:2012-12

    Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems (IEC 60034-18-34:2012), German version EN 60034-18-34:2012
    12/1/2012 - Paper - German - VDE
    Learn More
    €57.53

  • NF EN 60034-18-31, C51-318-31 (12/2012)

    Rotating electrical machines - Part 18-31 : Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines
    12/1/2012 - Paper - French - AFNOR
    Learn More
    €116.33

  • NF EN 62271-203, C64-471-203 (11/2012)

    High-voltage switchgear and controlgear - Part 203 : gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
    11/1/2012 - Paper - French - AFNOR
    Learn More
    €171.00

  • PD IEC/TS 62758:2012

    Calibration of space charge measuring equipment based on the pulsed electroacoustic (PEA) measurement principle
    10/31/2012 - PDF - English - BSI
    Learn More
    €293.00

  • JIS C 3851:2012 (R2017)

    Indoor post insulator of organic material
    10/22/2012 - PDF - Japanese - JSA
    Learn More
    €46.02

  • NF EN 61557-13, C42-198-13 (10/2012)

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13 : hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems - Sécurité électrique dans les réseaux de distribution basse tension de 1 000 V c.a. et 1 500 V c. c.
    10/1/2012 - Paper - French - AFNOR
    Learn More
    €103.33

  • DIN VDE V 0212-468 VDE V 0212-468:2012-10

    Fittings for overhead lines - Protective fitting attachment - Connection dimensions
    10/1/2012 - Paper - German - VDE
    Learn More
    €16.21

  • BS EN 60034-18-31:2012

    Rotating electrical machines Functional evaluation of insulation systems. Test procedures for form-wound windings. Thermal and classification systems used in rotating
    9/30/2012 - PDF - English - BSI
    Learn More
    €250.00

  • IEC 62217:2012

    IEC 62217:2012 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
    9/27/2012 - PDF - English, French - IEC
    Learn More
    €219.00

  • IEC TS 62758:2012

    IEC TS 62758:2012 Calibration of space charge measuring equipment based on the pulsed electro-acoustic (PEA) measurement principle
    9/18/2012 - PDF - English - IEC
    Learn More
    €270.00

  • BS EN 60034-18-34:2012

    Rotating electrical machines Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation thermomechanical endurance systems
    8/31/2012 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN 60512-16-21:2012

    Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16u. Whisker test via the application of external mechanical stresses
    7/31/2012 - PDF - English - BSI
    Learn More
    €180.00

  • UNE-EN 61936-1:2012

    Power installations exceeding 1 kV a.c. -- Part 1: Common rules
    7/11/2012 - PDF - Spanish - AENOR
    Learn More
    €137.00

  • UNE-EN 61936-1:2012

    Power installations exceeding 1 kV a.c. -- Part 1: Common rules
    7/11/2012 - PDF - English - AENOR
    Learn More
    €164.40

  • DIN EN 60664-1 Beiblatt 1 VDE 0110-1 Beiblatt 1:2012-06

    Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing (IEC/TR 60664-2-1:2011 + Cor. :2011)
    6/1/2012 - Paper - German - VDE
    Learn More
    €136.08

  • DIN EN 60505 VDE 0302-1:2012-05

    Evaluation and qualification of electrical insulation systems (IEC 60505:2011), German version EN 60505:2011
    5/1/2012 - Paper - German - VDE
    Learn More
    €155.17

  • PD IEC/TR 62730:2012

    HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test
    3/27/2012 - PDF - English - BSI
    Learn More
    €250.00

  • IEC TR 62730:2012

    IEC TR 62730:2012 HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test
    3/27/2012 - PDF - English - IEC
    Learn More
    €132.00

  • ASTM F1207M-12(2018)

    Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems [Metric]
    1/1/2012 - PDF - English - ASTM
    Learn More
    €46.00

  • ASTM F1207M-12(2018) + Redline

    Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems [Metric]
    1/1/2012 - PDF - English - ASTM
    Learn More
    €53.00

  • PD CLC/TR 62662:2011

    Measurement procedures for materials used in photovoltaic modules Encapsulants. Test procedure of optical durability
    12/31/2011 - PDF - English - BSI
    Learn More
    €250.00

  • NF EN 60505, C26-207 (12/2011)

    Evaluation and qualification of electrical insulation systems
    12/1/2011 - Paper - French - AFNOR
    Learn More
    €160.25

  • UNE-EN 60505:2011

    Evaluation and qualification of electrical insulation systems (Endorsed by AENOR in November of 2011.)
    11/1/2011 - PDF - English - AENOR
    Learn More
    €111.00

  • VG 88773:2011-10

    Glands for electrical cables - Assembly and application for cables with screen and sheath, Text in German and English
    10/1/2011 - PDF - English, German - DIN
    Learn More
    €85.79

  • NF EN 60034-18-32, C51-318-32 (10/2011)

    Rotating electrical machines - Part 18-32 : functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation by electrical endurance
    10/1/2011 - Paper - French - AFNOR
    Learn More
    €103.33

  • IEC 60505:2011

    IEC 60505:2011 Evaluation and qualification of electrical insulation systems
    7/11/2011 - PDF - English, French - IEC
    Learn More
    €397.00

  • DIN CLC/TS 60034-18-33 VDE V 0530-18-33:2011-07

    Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses (IEC/TS 60034-18-33:2010), German version CLC/TS 60034-18-33:2011
    7/1/2011 - Paper - German - VDE
    Learn More
    €57.53

  • BS EN 60601-2-57:2011

    Medical electrical equipment Particular requirements for the basic safety and essential performance of non-laser light source intended therapeutic, diagnostic, monitoring cosmetic/aesthetic use
    6/30/2011 - PDF - English - BSI
    Learn More
    €293.00

  • DD IEC/TS 62332-1:2011

    Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components General requirements
    6/30/2011 - PDF - English - BSI
    Learn More
    €250.00

  • DIN EN 60034-18-32 VDE 0530-18-32:2011-06

    Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation by electrical endurance (IEC 60034-18-32:2010), German version EN 60034-18-32:2010
    6/1/2011 - Paper - German - VDE
    Learn More
    €57.53

  • UNE-IEC 60050-471:2011

    International Electrotechnical Vocabulary (IEV) - Part 471: Insulators
    5/30/2011 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • DIN EN 50386:2011-04

    Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers, German version EN 50386:2010.
    4/1/2011 - PDF - German - DIN
    Learn More
    €65.89

  • DIN EN 50181:2011-04

    Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2,50 kA for equipment other than liquid filled transformers, German version EN 50181:2010.
    4/1/2011 - PDF - German - DIN
    Learn More
    €79.72

  • DIN CLC/TS 50537-1 VDE V 0115-537-1:2011-04

    Railway applications - Mounted parts of the traction transformer and cooling system - Part 1: HV bushing for traction transformers, German version CLC/TS 50537-1:2010
    4/1/2011 - - - VDE
    Learn More
    From: €65.60

  • IEC TS 62332-1:2011

    IEC TS 62332-1:2011 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 1: General requirements
    3/14/2011 - PDF - English - IEC
    Learn More
    €132.00

  • BS EN 61210:2010

    Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
    2/28/2011 - PDF - English - BSI
    Learn More
    €293.00

  • NF EN 50181, C66-556 (02/2011)

    Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2,50 kA for equipment other than liquid filled transformers
    2/1/2011 - Paper - French - AFNOR
    Learn More
    €83.00

  • PD IEC/TR 60664-2-1:2011

    Insulation coordination for equipment within low-voltage systems Application guide. Explanation of the application IEC 60664 series, dimensioning examples and dielectric testing
    1/31/2011 - PDF - English - BSI
    Learn More
    €348.00

  • IEC TR 60664-2-1:2011

    IEC TR 60664-2-1:2011 Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing
    1/31/2011 - PDF - English, French - IEC
    Learn More
    €397.00

  • UNE-EN 50181:2011 (R2022)

    Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2,50 kA for equipment other than liquid filled transformers
    1/19/2011 - PDF - Spanish - AENOR
    Learn More
    €57.00

  • UNE-EN 50181:2011 (R2022)

    Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2,50 kA for equipment other than liquid filled transformers
    1/19/2011 - PDF - English - AENOR
    Learn More
    €68.40

  • UNE-EN 50386:2011 (R2022)

    Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers
    1/19/2011 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN 50386:2011 (R2022)

    Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers
    1/19/2011 - PDF - English - AENOR
    Learn More
    €58.80

  • UNE-EN 61952:2010

    Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
    9/15/2010 - PDF - Spanish - AENOR
    Learn More
    €74.00

  • UNE-EN 61952:2010

    Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
    9/15/2010 - PDF - English - AENOR
    Learn More
    €88.80

  • UNE-EN 61467:2010

    Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests
    9/8/2010 - PDF - Spanish - AENOR
    Learn More
    €85.00

  • UNE-EN 61467:2010

    Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests
    9/8/2010 - PDF - English - AENOR
    Learn More
    €102.00

  • DIN EN 60071-1 VDE 0111-1:2010-09

    Insulation co-ordination - Part 1: Definitions, principles and rules (IEC 60071-1:2006 + A1:2010), German version EN 60071-1:2006 + A1:2010
    9/1/2010 - Paper - German - VDE
    Learn More
    €91.70

  • DIN EN 60034-18-1 VDE 0530-18-1:2010-09

    Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines (IEC 60034-18-1:2010), German version EN 60034-18-1:2010
    9/1/2010 - Paper - German - VDE
    Learn More
    €61.54

  • BS EN 50181:2010

    Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2,50 kA for equipment other than liquid filled transformers
    8/31/2010 - PDF - English - BSI
    Learn More
    €180.00

  • IEC TR 62662:2010

    IEC TR 62662:2010 Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials
    8/30/2010 - PDF - English - IEC
    Learn More
    €132.00

  • NF EN 60034-18-1, C51-318-1 (07/2010)

    Rotating electrical machines - Part 18-1 : functional evaluation of insulation systems - General guidelines
    7/1/2010 - Paper - French - AFNOR
    Learn More
    €103.33

  • DIN EN 62223:2010-06

    Insulators - Insulators Glossary of terms and definitions (IEC 62223:2009), German version EN 62223:2009
    6/1/2010 - PDF - German - DIN
    Learn More
    €92.62

  • DD CLC/TS 50537-1:2010

    Railway applications. Mounted parts of the traction transformer and cooling system HV bushing for transformers
    4/30/2010 - PDF - English - BSI
    Learn More
    €250.00

  • DIN EN 61857-21 VDE 0302-21:2010-02

    Electrical insulation systems - Procedures for thermal evaluation - Part 21: Specific requirements for general-purpose models - Wire-wound applications (IEC 61857-21:2009), German version EN 61857-21:2009
    2/1/2010 - Paper - German - VDE
    Learn More
    €53.63

  • BS EN 62223:2009

    Insulators. Glossary of terms and definitions
    1/31/2010 - PDF - English - BSI
    Learn More
    €180.00

  • UNE-EN 61109:2010

    Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
    1/20/2010 - PDF - Spanish - AENOR
    Learn More
    €73.00

  • UNE-EN 61109:2010

    Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
    1/20/2010 - PDF - English - AENOR
    Learn More
    €87.60

  • NF EN 61857-21, C26-310-21 (12/2009)

    Electrical insulation systems - Procedures for thermal evaluation - Part 21 : specific requirements for general-purpose models - Wire-wound applications - Systèmes d'isolation électrique
    12/1/2009 - Paper - French - AFNOR
    Learn More
    €88.00

  • UNE-EN 61857-21:2009

    Electrical insulation systems - Procedures for thermal evaluation -- Part 21: Specific requirements for general-purpose models - Wire-wound applications
    11/18/2009 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • UNE-EN 61857-21:2009

    Electrical insulation systems - Procedures for thermal evaluation -- Part 21: Specific requirements for general-purpose models - Wire-wound applications
    11/18/2009 - PDF - English - AENOR
    Learn More
    €81.60

  • BS EN 61857-21:2009

    Electrical insulation systems. Procedures for thermal evaluation Specific requirements general-purpose models. Wire-wound applications
    10/31/2009 - PDF - English - BSI
    Learn More
    €180.00

  • JIS C 60664-5:2009 (R2014)

    Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
    10/20/2009 - PDF - Japanese - JSA
    Learn More
    €41.86

  • JIS C 60664-1:2009 (R2014)

    Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    10/20/2009 - PDF - Japanese - JSA
    Learn More
    €55.77

  • JIS C 60664-3:2009 (R2014)

    Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
    10/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 60664-4:2009 (R2014)

    Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress
    10/20/2009 - PDF - Japanese - JSA
    Learn More
    €50.18

Items 401 to 600 of 883 total

Set Ascending Direction
per page

List  Grid