29.035.20 : Plastics and rubber insulating materials
-
UNE-EN 60684-3-209:2010
Flexible insulating sleeving -- Part 3: Specification for individual types of sleeving -- Sheet 209: Heat-shrinkable polyolefin sleeving, general purpose, flame retarded (Endorsed by AENOR in October of 2010.)
10/1/2010 - PDF - English - AENOR
Learn More€16.00 -
NF EN 60454-3-1/A1, C26-148-1/A1 (07/2010)
Pressure-sensitive adhesives tapes for electrical purposes - Part 3-1 : specifications for individual materials - PVC film tapes with pressure-sensitive adhesive
7/1/2010 - Paper - French - AFNOR
Learn More€54.67 -
IEC 60684-3-209:2010
IEC 60684-3-209:2010 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable, polyolefin sleeving, general purpose, flame retarded
6/10/2010 - PDF - English, French - IEC
Learn More€46.00 -
IEC 60684-3-282:2010
IEC 60684-3-282:2010 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 282: Heat-shrinkable, polyolefin sleeving - Stress control
6/10/2010 - PDF - English, French - IEC
Learn More€46.00 -
IEC 60684-3-281:2010
IEC 60684-3-281:2010 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive
6/10/2010 - PDF - English, French - IEC
Learn More€46.00 -
NF EN 60893-3-6/A1, C26-183-6/A1 (06/2010)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins - Matériaux isolants
6/1/2010 - Paper - French - AFNOR
Learn More€54.67 -
NF EN 60893-3-7/A1, C26-183-7/A1 (06/2010)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7 : Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins - Matériaux isolants
6/1/2010 - Paper - French - AFNOR
Learn More€54.67 -
UNE-EN 60893-3-6:2004/A1:2010
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
5/19/2010 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60893-3-6:2004/A1:2010
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
5/19/2010 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 60893-3-7:2004/A1:2010
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
5/19/2010 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60893-3-7:2004/A1:2010
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
5/19/2010 - PDF - English - AENOR
Learn More€40.80 -
DIN EN 60893-3-7 VDE 0318-3-7:2010-05
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins (IEC 60893-3-7:2003 + A1:2009), German version EN 60893-3-7:2004 + A1:2009
5/1/2010 - Paper - German - VDE
Learn More€49.48 -
JIS C 2161:2010 (R2014)
Test methods of coating powders for electrical insulation
3/23/2010 - PDF - Japanese - JSA
Learn More€50.18 -
UNE-EN 60893-3-5:2004/A1:2010
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
3/10/2010 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN 60893-3-5:2004/A1:2010
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
3/10/2010 - PDF - English - AENOR
Learn More€32.40 -
DIN EN 60893-3-5 VDE 0318-3-5:2010-03
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins (IEC 60893-3-5:2003 + A1:2009), German version EN 60893-3-5:2004 + A1:2009
3/1/2010 - Paper - German - VDE
Learn More€53.63 -
JIS C 3662-1:2009 (R2014)
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
12/21/2009 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 3662-2:2009 (R2014)
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
12/21/2009 - PDF - Japanese - JSA
Learn More€25.00 -
VG 95343-22:2009-12
Heat shrinkable components - Part 22: Shielding of component groups, requirements, tests, testing standard, Text in German and English
12/1/2009 - PDF - English, German - DIN
Learn More€72.80 -
NF EN 60893-3-5/A1, C26-183-5/A1 (12/2009)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5 : Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins - Matériaux isolants
12/1/2009 - Paper - French - AFNOR
Learn More€18.00 -
NF EN 60684-3-211, C93-643-211 (11/2009)
Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 211 : heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
11/1/2009 - Paper - French - AFNOR
Learn More€72.00 -
DIN VDE 0278-629-1 VDE 0278-629-1:2009-07
Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 1: Cables with extruded insulation, German version HD 629.1 S2:2006 + A1:2008
7/1/2009 - Paper - German - VDE
Learn More€81.46 -
DIN EN 50290-2-24 VDE 0819-104:2009-07
Communication cables - Part 2-24: Common design rules and construction - PE sheathing, German version EN 50290-2-24:2002 + A1:2008
7/1/2009 - - - VDE
Learn MoreFrom: €65.60 -
BS EN 61300-2-48:2009
Fibre optic interconnecting devices and passive components. Basic test measurement procedures Tests. Temperature-humidity cycling
5/31/2009 - PDF - English - BSI
Learn More€151.00 -
€0.00
-
DIN EN 50497 VDE 0473-497:2008-11
Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables, German version EN 50497:2007
11/1/2008 - - - VDE
Learn MoreFrom: €38.31 -
BS EN 62011-3-1:2003
Insulating materials. Industrial rigid moulded laminated tubes and rods of rectangular hexagonal cross-section based on thermosetting resins for electrical purposes Specifications indiviual Tubes
5/30/2008 - PDF - English - BSI
Learn More€151.00 -
DIN EN 60454-2 VDE 0340-2:2008-05
Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test (IEC 60454-2:2007); German version EN 60454-2:2007
5/1/2008 - Paper - German - VDE
Learn More€104.79 -
BS EN 62011-2:2004
Insulating materials. Industrial, rigid, moulded, laminated tubes and rods of rectangular hexagonal cross-section, based on thermosetting resins for electrical purposes Methods test
4/30/2008 - PDF - English - BSI
Learn More€180.00 -
UNE-EN 50497:2008 (R2019)
Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables
4/2/2008 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN 50497:2008 (R2019)
Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables
4/2/2008 - PDF - English - AENOR
Learn More€55.20 -
DIN EN 60454-3-4 VDE 0340-3-4:2008-04
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive (IEC 60454-3-4:2007); German version EN 60454-3-4:2007
4/1/2008 - Paper - German - VDE
Learn More€38.31 -
BS EN 61753-083-2:2008
Fibre optic interconnecting devices and passive components performance standard Non-connectorised single-mode fibre C-band/L-band WDM for category C. Controlled environment
3/31/2008 - PDF - English - BSI
Learn More€180.00 -
€0.00
-
DIN EN 50290-2-21 VDE 0819-101:2008-03
Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds; German version EN 50290-2-21:2001 + A1:2007
3/1/2008 - Paper - German - VDE
Learn More€38.31 -
DIN EN 50290-2-22 VDE 0819-102:2008-03
Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds; German version EN 50290-2-22:2001 + A1:2007
3/1/2008 - Paper - German - VDE
Learn More€29.12 -
DIN EN 50290-2-27 VDE 0819-107:2008-03
Communication cables - Part 2-27: Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds; German version EN 50290-2-27:2002 + A1:2007
3/1/2008 - Paper - German - VDE
Learn More€29.12 -
DIN EN 50290-2-26 VDE 0819-106:2008-03
Communication cables - Part 2-26: Common design rules and construction - Halogen free flame retardant insulation compounds; German version EN 50290-2-26:2002 + A1:2007
3/1/2008 - Paper - German - VDE
Learn More€38.31 -
DIN EN 60454-3-11 VDE 0340-3-11:2008-03
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives (IEC 60454-3-11:2007); German version EN 60454-3-11:2007
3/1/2008 - Paper - German - VDE
Learn More€53.63 -
UNE-EN 60454-2:2007
Pressure-sensitive adhesive tapes for electrical purposes -- Part 2: Methods of test (IEC 60454-2:2007). (Endorsed by AENOR in February of 2008.)
2/1/2008 - PDF - English - AENOR
Learn More€78.00 -
DIN EN 60684-3-248 VDE 0341-3-248:2008-01
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 (IEC 60684-3-248:2007); German version EN 60684-3-248:2007
1/1/2008 - Paper - German - VDE
Learn More€49.48 -
DIN EN 60684-3-211 VDE 0341-3-211:2008-01
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1 (IEC 60684-3-211:2007); German version EN 60684-3-211:2007
1/1/2008 - Paper - German - VDE
Learn More€42.45 -
BS EN 50497:2007
Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables
12/31/2007 - PDF - English - BSI
Learn More€151.00 -
DIN EN 60684-3-246 VDE 0341-3-246:2007-12
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded (IEC 60684-3-246:2007); German version EN 60684-3-246:2007
12/1/2007 - Paper - German - VDE
Learn More€45.89 -
UNE-EN 60684-3-211:2007
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1 (IEC 60684-3-211:2007).
11/28/2007 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 60684-3-211:2007
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1 (IEC 60684-3-211:2007).
11/28/2007 - PDF - English - AENOR
Learn More€72.00 -
BS EN 60454-2:2007
Pressure-sensitive adhesive tapes for electrical purposes Methods of test
10/31/2007 - PDF - English - BSI
Learn More€331.00 -
UNE-EN 50290-2-21:2002/A1:2007
Communication cables -- Part 2-21: Common design rules and construction - PVC insulation compounds
10/17/2007 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN 50290-2-21:2002/A1:2007
Communication cables -- Part 2-21: Common design rules and construction - PVC insulation compounds
10/17/2007 - PDF - English - AENOR
Learn More€32.40 -
UNE-EN 50290-2-22:2002/A1:2007
Communication cables -- Part 2-22: Common design rules and construction - PVC sheathing compounds
10/17/2007 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN 50290-2-22:2002/A1:2007
Communication cables -- Part 2-22: Common design rules and construction - PVC sheathing compounds
10/17/2007 - PDF - English - AENOR
Learn More€32.40 -
UNE-EN 50290-2-26:2002/A1:2007
Communication cables -- Part 2-26: Common design rules and construction - Halogen free flame retardant insulation compounds
10/17/2007 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN 50290-2-26:2002/A1:2007
Communication cables -- Part 2-26: Common design rules and construction - Halogen free flame retardant insulation compounds
10/17/2007 - PDF - English - AENOR
Learn More€32.40 -
DIN EN 50214 VDE 0283-2:2007-10
Flat polyvinyl chloride sheathed flexible cables; German version EN 50214:2006
10/1/2007 - Paper - German - VDE
Learn More€74.10 -
UNE-EN 60684-3-246:2007
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded (IEC 60684-3-246:2007).
9/19/2007 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 60684-3-246:2007
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded (IEC 60684-3-246:2007).
9/19/2007 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 60684-3-248:2007
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 (IEC 60684-3-248:2007). (Endorsed by AENOR in September of 2007.)
9/1/2007 - PDF - English - AENOR
Learn More€59.00 -
BS EN 60454-3-4:2007
Pressure-sensitive adhesive tapes for electrical purposes Specifications individual materials Cellulose paper, creped and non-creped, with rubber thermosetting
8/31/2007 - PDF - English - BSI
Learn More€151.00 -
BS EN 60454-3-11:2007
Pressure-sensitive adhesive tapes for electrical purposes Specifications individual materials Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives
8/31/2007 - PDF - English - BSI
Learn More€180.00 -
BS EN 50290-2-26:2002
Communication cables Common design rules and construction. Halogen free flame retardant insulation compounds
8/31/2007 - PDF - English - BSI
Learn More€151.00 -
DIN EN 61212-2 VDE 0319-2:2007-08
Insulating Materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 61212-2:2006); German version EN 61212-2:2006
8/1/2007 - Paper - German - VDE
Learn More€65.60 -
JIS C 3663-4:2007 (R2017)
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
7/20/2007 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 3663-5:2007 (R2017)
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables
7/20/2007 - PDF - Japanese - JSA
Learn More€25.00 -
JIS C 3663-6:2007 (R2017)
Rubber insulated cables - Rated voltages up to and including 450/750V - Part 6: Arc welding electrode cables
7/20/2007 - PDF - Japanese - JSA
Learn More€25.00 -
BS EN 60684-3-248:2007
Flexible insulating sleeving. Specifications for individual types of sleeving General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1
6/29/2007 - PDF - English - BSI
Learn More€180.00 -
BS EN 60684-3-211:2007
Flexible insulating sleeving Specifications for individual types of Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
6/29/2007 - PDF - English - BSI
Learn More€151.00 -
IEC 60454-2:2007
IEC 60454-2:2007 Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test
6/21/2007 - PDF - English - IEC
Learn More€311.00 -
IEC 60454-2:2007
IEC 60454-2:2007 Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test
6/21/2007 - PDF - English, French - IEC
Learn More€311.00 -
IEC 60454-3-4:2007
IEC 60454-3-4:2007 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive
6/5/2007 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60454-3-4:2007
IEC 60454-3-4:2007 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive
6/5/2007 - PDF - English - IEC
Learn More€23.00 -
DIN EN 61212-3-3 VDE 0319-3-3:2007-06
Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods (IEC 61212-3-3:2006); German version EN 61212-3-3:2006
6/1/2007 - Paper - German - VDE
Learn More€45.89 -
BS EN 60684-3-246:2007
Flexible insulating sleeving Specifications for individual types of Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded
5/31/2007 - PDF - English - BSI
Learn More€151.00 -
IEC 60454-3-11:2007
IEC 60454-3-11:2007 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive
5/10/2007 - PDF - English, French - IEC
Learn More€92.00 -
IEC 60454-3-11:2007
IEC 60454-3-11:2007 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive
5/10/2007 - PDF - English - IEC
Learn More€92.00 -
UNE-EN 61212-2:2006
Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 2: Methods of test (IEC 61212-2:2006). (Endorsed by AENOR in April of 2007.)
4/1/2007 - PDF - English - AENOR
Learn More€66.00 -
DIN EN 50414 VDE 0473-414:2007-03
Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining; German version EN 50414:2006
3/1/2007 - Paper - German - VDE
Learn More€45.89 -
BS EN 62329-1:2006
Heat shrinkable moulded shapes Definitions and general requirements
2/28/2007 - PDF - English - BSI
Learn More€151.00 -
BS EN 60454-3-8:2006
Pressure-sensitive adhesive tapes for electrical purposes Specifications individual materials Woven fabric with pressure-sensitive based on glass, cellulose acetate alone or combined viscose fibre
2/28/2007 - PDF - English - BSI
Learn More€151.00 -
IEC 60684-3-248:2007
IEC 60684-3-248:2007 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1
2/16/2007 - PDF - English, French - IEC
Learn More€92.00 -
IEC 60684-3-248:2007
IEC 60684-3-248:2007 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1
2/16/2007 - PDF - English - IEC
Learn More€92.00 -
IEC 60684-3-211:2007
IEC 60684-3-211:2007 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
2/15/2007 - PDF - English, French - IEC
Learn More€46.00 -
IEC 60684-3-246:2007
IEC 60684-3-246:2007 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, non-flame retarded
2/15/2007 - PDF - English, French - IEC
Learn More€46.00 -
IEC 60684-3-246:2007
IEC 60684-3-246:2007 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, non-flame retarded
2/15/2007 - PDF - English - IEC
Learn More€46.00 -
IEC 60684-3-211:2007
IEC 60684-3-211:2007 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
2/15/2007 - PDF - English - IEC
Learn More€46.00 -
UNE-EN 61212-3-3:2006
Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 3: Round laminated moulded rods (IEC 61212-3-3:2006). (Endorsed by AENOR in February of 2007.)
2/1/2007 - PDF - English - AENOR
Learn More€42.00 -
UNE-EN 62329-2:2006
Heat shrinkable moulded shapes -- Part 2: Methods of test (IEC 62239-2:2006). (Endorsed by AENOR in February of 2007.)
2/1/2007 - PDF - English - AENOR
Learn More€84.00 -
BS EN 61212-2:2006
Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Methods of test
1/31/2007 - PDF - English - BSI
Learn More€250.00 -
BS EN 60684-3-233:2006
Flexible insulating sleeving Specifications for individual types of Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
1/31/2007 - PDF - English - BSI
Learn More€180.00 -
DIN EN 60454-3-12 VDE 0340-3-12:2007-01
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive (IEC 60454-3-12:2006); German version EN 60454-3-12:2006
1/1/2007 - Paper - German - VDE
Learn More€45.89 -
DIN EN 61212-1 VDE 0319-1:2007-01
Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements (IEC 61212-1:2006); German version EN 61212-1:2006
1/1/2007 - Paper - German - VDE
Learn More€45.89 -
ASTM D2308-07(2020)e1
Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
1/1/2007 - PDF - English - ASTM
Learn More€46.00 -
ASTM D2308-07(2020)e1 + Redline
Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
1/1/2007 - PDF - English - ASTM
Learn More€53.00 -
BS EN 60684-3-212:2006
Flexible insulating sleeving Specifications for individual types of Heat-shrinkable polyolefin sleevings
12/29/2006 - PDF - English - BSI
Learn More€180.00 -
DIN EN 60454-3-8 VDE 0340-3-8:2006-12
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3-8:2006); German version EN 60454-3-8:2006
12/1/2006 - Paper - German - VDE
Learn More€42.45 -
€348.00 -
UNE-EN 50414:2006 (R2019)
Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining
11/8/2006 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN 50414:2006 (R2019)
Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining
11/8/2006 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN 60454-3-2:2006
Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives (IEC 60454-3-2:2006)
11/8/2006 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN 60454-3-2:2006
Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives (IEC 60454-3-2:2006)
11/8/2006 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN 60454-3-12:2006
Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive (IEC 60454-3-12:2006)
11/8/2006 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN 60454-3-12:2006
Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive (IEC 60454-3-12:2006)
11/8/2006 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN 61212-1:2006
Insulating materials-Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Part1: Definitions, designations and general requirements (IEC 61212-1:2006) (Endorsed by AENOR in November of 2006.)
11/1/2006 - PDF - English - AENOR
Learn More€28.00 -
DIN EN 60455-3-5 VDE 0355-3-5:2006-10
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins (IEC 60455-3-5:2006); German version EN 60455-3-5:2006
10/1/2006 - Paper - German - VDE
Learn More€45.89 -
DIN EN 60684-3-233 VDE 0341-3-233:2006-10
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable, fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-233:2006); German version EN 60684-3-233:2006
10/1/2006 - Paper - German - VDE
Learn More€42.45 -
DIN EN 60454-3-2 VDE 0340-3-2:2006-10
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives (IEC 60454-3-2:2006); German version EN 60454-3-2:2006
10/1/2006 - Paper - German - VDE
Learn More€42.45 -
DIN EN 62329-1 VDE 0342-1:2006-10
Heat shrinkable moulded shapes - Part 1: Definitions and general requirements (IEC 62329-1:2005); German version EN 62329-1:2006
10/1/2006 - Paper - German - VDE
Learn More€38.31 -
DIN EN 50363-1 VDE 0207-363-1:2006-10
Insulating, sheathing and covering materials for low voltage energy cables - Part 1: Cross-linked elastomeric insulating compounds; German version EN 50363-1:2005
10/1/2006 - Paper - German - VDE
Learn More€38.31 -
DIN EN 50363-2-2 VDE 0207-363-2-2:2006-10
Insulating, sheathing and covering materials for low voltage energy cables - Part 2-2: Cross-linked elastomeric covering compounds; German version EN 50363-2-2:2005
10/1/2006 - Paper - German - VDE
Learn More€38.31 -
DIN EN 50363-4-1 VDE 0207-363-4-1:2006-10
Insulating, sheathing and covering materials for low voltage energy cables - Part 4-1: PVC sheathing compounds; German version EN 50363-4-1:2005
10/1/2006 - Paper - German - VDE
Learn More€38.31 -
DIN EN 50363-4-2 VDE 0207-363-4-2:2006-10
Insulating, sheathing and covering materials for low voltage energy cables - Part 4-2: PVC covering compounds; German version EN 50363-4-2:2005
10/1/2006 - Paper - German - VDE
Learn More€38.31 -
DIN EN 50363-7 VDE 0207-363-7:2006-10
Insulating, sheathing and covering materials for low voltage energy cables - Part 7: Halogen-free, thermoplastic insulating compounds; German version EN 50363-7:2005
10/1/2006 - Paper - German - VDE
Learn More€38.31 -
DIN EN 50363-10-1 VDE 0207-363-10-1:2006-10
Insulating, sheathing and covering materials for low voltage energy cables - Part 10-1: Miscellaneous sheathing compounds - Cross-linked polyvinyl chloride (XLPVC); German version EN 50363-10-1:2005
10/1/2006 - Paper - German - VDE
Learn More€38.31 -
DIN EN 50363-9-1 VDE 0207-363-9-1:2006-10
Insulating, sheathing and covering materials for low voltage energy cables - Part 9-1: Miscellaneous insulating compounds - Cross-linked polyvinyl chloride (XLPVC); German version EN 50363-9-1:2005
10/1/2006 - Paper - German - VDE
Learn More€38.31 -
DIN EN 50363-10-2 VDE 0207-363-10-2:2006-10
Insulating, sheathing and covering materials for low voltage energy cables - Part 10-2: Miscellaneous sheathing compounds - Thermoplastic polyurethane; German version EN 50363-10-2:2005
10/1/2006 - Paper - German - VDE
Learn More€38.31 -
DIN EN 50363-2-1 VDE 0207-363-2-1:2006-10
Insulating, sheathing and covering materials for low voltage energy cables - Part 2-1: Cross-linked elastomeric sheathing compounds, German version EN 50363-2-1:2005
10/1/2006 - - - VDE
Learn MoreFrom: €42.45 -
DIN EN 50363-3 VDE 0207-363-3:2006-10
Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds, German version EN 50363-3:2005
10/1/2006 - - - VDE
Learn MoreFrom: €38.31 -
DIN EN 50363-5 VDE 0207-363-5:2006-10
Insulating, sheathing and covering materials for low voltage energy cables - Part 5: Halogen-free, cross-linked insulating compounds, German version EN 50363-5:2005
10/1/2006 - - - VDE
Learn MoreFrom: €38.31 -
DIN EN 50363-6 VDE 0207-363-6:2006-10
Insulating, sheathing and covering materials for low voltage energy cables - Part 6: Halogen-free, cross-linked sheathing compounds, German version EN 50363-6:2005
10/1/2006 - - - VDE
Learn MoreFrom: €38.31 -
DIN EN 50363-8 VDE 0207-363-8:2006-10
Insulating, sheathing and covering materials for low voltage energy cables - Part 8: Halogen-free, thermoplastic sheathing compounds, German version EN 50363-8:2005
10/1/2006 - - - VDE
Learn MoreFrom: €38.31 -
DIN EN 60684-3-212 VDE 0341-3-212:2006-08
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings (IEC 60684-3-212:2005); German version EN 60684-3-212:2006
8/1/2006 - Paper - German - VDE
Learn More€45.89 -
BS 7655-0:2006
Specification for insulating and sheathing materials cables General introduction
7/31/2006 - PDF - English - BSI
Learn More€151.00 -
BS 7655-1.2:1997
Specification for insulating and sheathing materials cables Cross-linked elastomeric compounds General 90°C application
7/31/2006 - PDF - English - BSI
Learn More€151.00 -
BS 7655-1.5:2000
Specification for insulating and sheathing materials cables Cross-linked elastomeric compounds Flame retardant composites
7/31/2006 - PDF - English - BSI
Learn More€151.00 -
BS 7655-2.6:2000
Specification for insulating and sheathing materials cables Cross-linked elastomeric compounds Sheathing ships' wiring offshore applications
7/31/2006 - PDF - English - BSI
Learn More€151.00 -
BS 7655-6.1:1997
Specification for insulating and sheathing materials cables Thermoplastic compounds having low emission of corrosive gases, suitable use in smoke when affected by fire General application thermoplastic types
7/31/2006 - PDF - English - BSI
Learn More€151.00 -
BS 7655-10.1:2000
Specification for insulating and sheathing materials cables Polyethylene compounds Thermoplastic medium density polyethylene (MDPE) compound
7/31/2006 - PDF - English - BSI
Learn More€151.00 -
IEC 62329-2:2006
IEC 62329-2:2006 Heat-shrinkable moulded shapes - Part 2: Methods of test
7/10/2006 - PDF - English, French - IEC
Learn More€311.00 -
IEC 62329-2:2006
IEC 62329-2:2006 Heat-shrinkable moulded shapes - Part 2: Methods of test
7/10/2006 - PDF - English - IEC
Learn More€311.00 -
NF EN 60454-3-12, C26-148-12 (07/2006)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 12 : requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesives
7/1/2006 - Paper - French - AFNOR
Learn More€72.00 -
NF EN 60454-3-2, C26-148-2 (07/2006)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives
7/1/2006 - Paper - French - AFNOR
Learn More€72.00 -
NF EN 60455-3-5, C26-163-5 (07/2006)
Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 5 : unsaturated polyester based impregnating resins
7/1/2006 - Paper - French - AFNOR
Learn More€88.00 -
UNE-EN 60455-3-5:2006
Resin based reactive compounds used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 5: Unsaturated polyester based impregnating resins (Endorsed by AENOR in July of 2006.)
7/1/2006 - PDF - English - AENOR
Learn More€57.00 -
NF EN 60684-3-233, C93-643-233 (06/2006)
Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 233 : heat-shrinkable, fluoroelastomer sleeving, flame-retarded, fluid resistant, shrink ratio 2:1
6/1/2006 - Paper - English, French - AFNOR
Learn More€93.50 -
NF EN 60454-3-8, C26-148-8 (06/2006)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 8 : woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre
6/1/2006 - Paper - English - AFNOR
Learn More€65.00 -
BS EN 60454-3-2:2006
Pressure-sensitive adhesive tapes for electrical purposes Specifications individual materials Requirements polyester film with rubber thermosetting, thermoplastic or acrylic crosslinked adhesives
5/31/2006 - PDF - English - BSI
Learn More€151.00 -
BS EN 60454-3-12:2006
Pressure-sensitive adhesive tapes for electrical purposes Specifications individual materials Requirements polyethylene and polypropylene film with pressure sensitive
5/31/2006 - PDF - English - BSI
Learn More€151.00 -
BS EN 50414:2006
Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables. Method A: Total lead content determination with flame excitation atomic absorption spectrometry. Method B: Qualitative analysis of lead by lead sulphide staining
5/31/2006 - PDF - English - BSI
Learn More€151.00 -
UNE-EN 50363-4-1:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 4-1: PVC sheathing compounds
5/10/2006 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN 50363-4-1:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 4-1: PVC sheathing compounds
5/10/2006 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN 50363-4-2:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 4-2: PVC covering compounds
5/10/2006 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 50363-4-2:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 4-2: PVC covering compounds
5/10/2006 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN 50363-5:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 5: Halogen-free, cross-linked insulating compounds
5/10/2006 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN 50363-5:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 5: Halogen-free, cross-linked insulating compounds
5/10/2006 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN 50363-10-1:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 10-1: Miscellaneous sheathing compounds - Cross-linked polyvinyl chloride (XLPVC)
5/10/2006 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 50363-10-1:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 10-1: Miscellaneous sheathing compounds - Cross-linked polyvinyl chloride (XLPVC)
5/10/2006 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN 50363-10-2:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 10-2: Miscellaneous sheathing compounds - Thermoplastic polyurethane
5/10/2006 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 50363-10-2:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 10-2: Miscellaneous sheathing compounds - Thermoplastic polyurethane
5/10/2006 - PDF - English - AENOR
Learn More€46.80 -
NF EN 60684-3-212, C93-643-212 (05/2006)
Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 212 : heat-shrinkable polyolefin sleevings
5/1/2006 - Paper - English - AFNOR
Learn More€79.50 -
UNE-EN 62329-1:2006
Heat shrinkable moulded shapes -- Part 1: Definitions and general requirements (Endorsed by AENOR in May of 2006.)
5/1/2006 - PDF - English - AENOR
Learn More€42.00 -
UNE-EN 60684-3-212:2006
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 212: Heat-shrinkable polyolefin sleevings (Endorsed by AENOR in April of 2006.)
4/1/2006 - PDF - English - AENOR
Learn More€58.00 -
UNE-EN 60684-3-233:2006
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (Endorsed by AENOR in April of 2006.)
4/1/2006 - PDF - English - AENOR
Learn More€58.00 -
JIS C 5402-11-7:2006 (R2015)
Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
3/25/2006 - PDF - Japanese - JSA
Learn More€25.00 -
NF EN 50363-1, C32-042-1 (03/2006)
Insulating, sheathing and covering materials for low voltage energy cables - Part 1 : cross-linked elastomeric insulating compounds
3/1/2006 - Paper - French - AFNOR
Learn More€72.00 -
NF EN 50363-2-1, C32-042-2-1 (03/2006)
Insulating, sheathing and covering materials for low voltage energy cables - Part 2-1 : cross-linked elastomeric sheathing compounds
3/1/2006 - Paper - French - AFNOR
Learn More€72.00 -
NF EN 50363-2-2, C32-042-2-2 (03/2006)
Insulating, sheathing and covering materials for low voltage energy cables - Part 2-2 : cross-linked elastomeric covering compounds
3/1/2006 - Paper - French - AFNOR
Learn More€54.50 -
NF EN 50363-3, C32-042-3 (03/2006)
Insulating, sheathing and covering materials for low voltage energy cables - Part 3 : PVC insulating compounds
3/1/2006 - Paper - French - AFNOR
Learn More€72.00 -
NF EN 50363-4-1, C32-042-4-1 (03/2006)
Insulating, sheathing and covering materials for low voltage energy cables - Part 4-1 : PVC sheathing compounds
3/1/2006 - Paper - French - AFNOR
Learn More€72.00 -
NF EN 50363-4-2, C32-042-4-2 (03/2006)
Insulating, sheathing and covering materials for low voltage energy cables - Part 4-2 : PVC covering compounds
3/1/2006 - Paper - French - AFNOR
Learn More€54.50 -
NF EN 50363-5, C32-042-5 (03/2006)
Insulating, sheathing and covering materials for low voltage energy cables - Part 5 : halogen-free, cross-linked insulating compounds
3/1/2006 - Paper - French - AFNOR
Learn More€72.00 -
NF EN 50363-6, C32-042-6 (03/2006)
Insulating, sheathing and covering materials for low voltage energy cableS - Part 6 : halogen-free, cross-linked sheathing compounds
3/1/2006 - Paper - French - AFNOR
Learn More€72.00 -
NF EN 50363-7, C32-042-7 (03/2006)
Insulating, sheathing and covering materials for low voltage energy cables - Part 7 : halogen-free, thermoplastic insulating compounds
3/1/2006 - Paper - French - AFNOR
Learn More€54.50 -
NF EN 50363-8, C32-042-8 (03/2006)
Insulating, sheathing and covering materials for low-voltage energy cable - Part 8 : halogen-free, thermoplastic sheathing compounds
3/1/2006 - Paper - French - AFNOR
Learn More€72.00 -
NF EN 50363-9-1, C32-042-9-1 (03/2006)
Insulating, sheathing and covering materials for low voltage energy cables - Part 9-1 : miscellaneous insulating compounds - Cross-linked polyvinyl chloride (XLPVC)
3/1/2006 - Paper - French - AFNOR
Learn More€54.50 -
NF EN 50363-10-1, C32-042-10-1 (03/2006)
Insulating, sheathing and covering materials for low voltage energy cables - Part 10-1 : miscellaneous sheathing compounds - Cross-linked polyvinyl chloride (XLPVC)
3/1/2006 - Paper - French - AFNOR
Learn More€54.50 -
NF EN 50363-10-2, C32-042-10-2 (03/2006)
Insulating, sheathing and covering materials for low voltage energy cables - Part 10-2 : miscellaneous sheathing compounds - Thermoplastic polyurethane
3/1/2006 - Paper - French - AFNOR
Learn More€54.50 -
IEC 60454-3-8:2006
IEC 60454-3-8:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre
2/13/2006 - PDF - English, French - IEC
Learn More€46.00 -
IEC 60454-3-8:2006
IEC 60454-3-8:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre
2/13/2006 - PDF - English - IEC
Learn More€46.00 -
BS EN 50363-2-2:2005
Insulating, sheathing and covering materials for low voltage energy cables Cross-linked elastomeric compounds
2/8/2006 - PDF - English - BSI
Learn More€151.00 -
BS EN 50363-1:2005
Insulating, sheathing and covering materials for low voltage energy cables Cross-linked elastomeric insulating compounds
2/3/2006 - PDF - English - BSI
Learn More€151.00 -
BS EN 50363-4-1:2005
Insulating, sheathing and covering materials for low voltage energy cables PVC compounds
2/3/2006 - PDF - English - BSI
Learn More€151.00 -
BS EN 50363-4-2:2005
Insulating, sheathing and covering materials for low voltage energy cables PVC compounds
2/3/2006 - PDF - English - BSI
Learn More€151.00 -
IEC 60454-3-2:2006
IEC 60454-3-2:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives
1/23/2006 - PDF - English, French - IEC
Learn More€46.00 -
IEC 60454-3-12:2006
IEC 60454-3-12:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive
1/23/2006 - PDF - English, French - IEC
Learn More€46.00 -
IEC 60454-3-2:2006
IEC 60454-3-2:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives
1/23/2006 - PDF - English - IEC
Learn More€46.00 -
IEC 60454-3-12:2006
IEC 60454-3-12:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive
1/23/2006 - PDF - English - IEC
Learn More€46.00 -
IEC 60684-3-233:2006
IEC 60684-3-233:2006 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
1/17/2006 - PDF - English - IEC
Learn More€92.00 -
BS EN 50363-7:2005
Insulating, sheathing and covering materials for low voltage energy cables Halogen-free, thermoplastic insulating compounds
1/16/2006 - PDF - English - BSI
Learn More€151.00 -
BS EN 50363-9-1:2005
Insulating, sheathing and covering materials for low-voltage energy cables Miscellaneous insulating compounds. Cross-linked polyvinyl chloride (XLPVC)
1/16/2006 - PDF - English - BSI
Learn More€151.00 -
BS EN 50363-10-1:2005
Insulating, sheathing and covering materials for low-voltage energy cables Miscellaneous compounds. Cross-linked polyvinyl chloride (XLPVC)
1/16/2006 - PDF - English - BSI
Learn More€151.00 -
BS EN 50363-10-2:2005
Insulating, sheathing and covering materials for low-voltage energy cables Miscellaneous compounds. Thermoplastic polyurethane
1/16/2006 - PDF - English - BSI
Learn More€151.00 -
IEC 62329-1:2005
IEC 62329-1:2005 Heat shrinkable moulded shapes - Part 1: Definitions and general requirements
11/21/2005 - PDF - English, French - IEC
Learn More€46.00 -
IEC 60684-3-212:2005
IEC 60684-3-212:2005 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings
11/21/2005 - PDF - English, French - IEC
Learn More€92.00 -
IEC 60684-3-212:2005
IEC 60684-3-212:2005 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings
11/21/2005 - PDF - English - IEC
Learn More€92.00 -
IEC 62329-1:2005
IEC 62329-1:2005 Heat shrinkable moulded shapes - Part 1: Definitions and general requirements
11/21/2005 - PDF - English - IEC
Learn More€46.00 -
UNE-EN 60893-2:2005
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 2: Methods of test
10/19/2005 - PDF - Spanish - AENOR
Learn More€76.00 -
UNE-EN 60893-2:2005
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 2: Methods of test
10/19/2005 - PDF - English - AENOR
Learn More€91.20 -
UNE-EN 60684-3-228:2004
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (Endorsed by AENOR in May of 2005.)
5/1/2005 - PDF - English - AENOR
Learn More€42.00 -
UNE-EN 60684-3-165:2005
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving
4/13/2005 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN 60684-3-165:2005
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving
4/13/2005 - PDF - English - AENOR
Learn More€63.60 -
DIN EN 60684-3-228 VDE 0341-3-228:2005-04
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-228:2004); German version EN 60684-3-228:2004
4/1/2005 - Paper - German - VDE
Learn More€42.45 -
DIN EN 60684-3-165 VDE 0341-3-165:2005-04
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving (IEC 60684-3-165:2004); German version EN 60684-3-165:2004
4/1/2005 - Paper - German - VDE
Learn More€42.45 -
DIN EN 60893-2 VDE 0318-2:2005-02
Insulating materials - Industrial laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 60893-2:2003); German version EN 60893-2:2004
2/1/2005 - Paper - German - VDE
Learn More€91.70 -
DIN EN 61086-2 VDE 0361-2:2005-01
Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test (IEC 61086-2:2004); German version EN 61086-2:2004
1/1/2005 - Paper - German - VDE
Learn More€61.54 -
UNE-EN 61086-2:2004 ERRATUM:2004
Coatings for loaded printed wire boards (conformal coatings) -- Part 2: Methods of test
12/31/2004 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 62011-2:2004
Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes -- Part 2: Methods of test
12/31/2004 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 62011-2:2004
Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes -- Part 2: Methods of test
12/31/2004 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 60893-3-3:2004
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
12/17/2004 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 60893-3-3:2004
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
12/17/2004 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 60893-3-4:2004
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
12/17/2004 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 60893-3-4:2004
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
12/17/2004 - PDF - English - AENOR
Learn More€81.60
