29.035.01 : Insulating materials in general
-
IEC 60811-404:2012
IEC 60811-404:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths
3/12/2012 - PDF - English, French -
Learn More€46.00 -
IEC 60811-412:2012
IEC 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
3/12/2012 - PDF - English, French -
Learn More€46.00 -
IEC 60811-409:2012
IEC 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
3/12/2012 - PDF - English, French -
Learn More€92.00 -
IEC 60811-203:2012
IEC 60811-203:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions
3/12/2012 - PDF - English, French -
Learn More€23.00 -
IEC 60811-410:2012
IEC 60811-410:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
3/12/2012 - PDF - English, French -
Learn More€46.00 -
IEC 60811-408:2012
IEC 60811-408:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds
3/12/2012 - PDF - English, French -
Learn More€46.00 -
IEC 60811-403:2012
IEC 60811-403:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds
3/12/2012 - PDF - English, French -
Learn More€92.00 -
UNE-EN 62631-1:2012
Dielectric and resistive properties of solid insulating materials - Part 1: General
3/7/2012 - PDF - English -
Learn More€81.60 -
UNE-EN 62631-1:2012
Dielectric and resistive properties of solid insulating materials - Part 1: General
3/7/2012 - PDF - Spanish -
Learn More€68.00 -
NF EN 50363-0, C32-042-0 (03/2012)
Insulating, sheathing and covering materials for low-voltage energy cables - Part 0 : general introduction
3/1/2012 - Paper - French -
Learn More€72.00 -
DIN EN 62631-1:2012-03
Dielectric and resistive properties of solid insulating materials - Part 1: General (IEC 62631-1:2011), German version EN 62631-1:2011
3/1/2012 - PDF - German -
Learn More€92.62 -
BS IEC 60493-1:2011
Guide for the statistical analysis of ageing test data Methods based on mean values normally distributed results
2/29/2012 - PDF - English -
Learn More€293.00 -
IEC 60893-3-3:2003+AMD1:2011 Edition 2.1
IEC 60893-3-3:2003+AMD1:2011 (Consolidated version) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
1/27/2012 - PDF - English, French -
Learn More€75.00 -
ASTM A937/A937M-12(2019) + Redline
Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
1/1/2012 - PDF - English -
Learn More€61.00 -
ASTM A937/A937M-12(2019)
Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
1/1/2012 - PDF - English -
Learn More€51.00 -
JIS C 2135:2011 (R2016)
Dry, solid insulating materials - Resistance test to high-voltage low-current arc discharges
12/20/2011 - PDF - Japanese -
Learn More€25.00 -
IEC 60493-1:2011
IEC 60493-1:2011 Guide for the statistical analysis of ageing test data - Part 1: Methods based on mean values of normally distributed test results
12/14/2011 - PDF - English, French -
Learn More€270.00 -
IEC 60893-3-3:2003/AMD1:2011
IEC 60893-3-3:2003/AMD1:2011 Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
11/28/2011 - PDF - English, French -
Learn More€12.00 -
IEC 60893-3-2:2003+AMD1:2011 Edition 2.1
IEC 60893-3-2:2003+AMD1:2011 (Consolidated version) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
11/28/2011 - PDF - English, French -
Learn More€190.00 -
NF EN 62631-1, C26-631-1 (11/2011)
Dielectric and resistive properties of solid insulating materials - Part 1 : General
11/1/2011 - Paper - French -
Learn More€88.33 -
UNE-EN 60212:2011
Standard conditions for use prior to and during the testing of solid electrical insulating materials (Endorsed by AENOR in October of 2011.)
10/1/2011 - PDF - English -
Learn More€58.00 -
DIN EN 60212 VDE 0308-1:2011-10
Standard conditions for use prior to and during the testing of solid electrical insulating materials (IEC 60212:2010), German version EN 60212:2011
10/1/2011 - Paper - German -
Learn More€45.89 -
BS EN 50363-0:2011
Insulating, sheathing and covering materials for low-voltage energy cables General introduction
9/30/2011 - PDF - English -
Learn More€151.00 -
BS EN 60626-2:2009
Combined flexible materials for electrical insulation Methods of test
8/31/2011 - PDF - English -
Learn More€151.00 -
BS EN 60212:2011
Standard conditions for use prior to and during the testing of solid electrical insulating materials
8/31/2011 - PDF - English -
Learn More€180.00 -
JIS C 2143-2:2011 (R2016)
Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties - Choice of test criteria
8/22/2011 - PDF - Japanese -
Learn More€25.00 -
UNE-EN 50363-2-1:2006/A1:2011
Insulating, sheathing and covering materials for low voltage energy cables -- Part 2-1: Cross-linked elastomeric sheathing compounds
5/30/2011 - PDF - English -
Learn More€30.00 -
UNE-EN 50363-0:2011 (R2019)
Insulating, sheathing and covering materials for low-voltage energy cables -- Part 0: General introduction
5/30/2011 - PDF - English -
Learn More€62.40 -
UNE-EN 50363-3:2006/A1:2011
Insulating, sheathing and covering materials for low voltage energy cables -- Part 3: PVC insulating compounds
5/30/2011 - PDF - Spanish -
Learn More€25.00 -
UNE-EN 50363-2-1:2006/A1:2011
Insulating, sheathing and covering materials for low voltage energy cables -- Part 2-1: Cross-linked elastomeric sheathing compounds
5/30/2011 - PDF - Spanish -
Learn More€25.00 -
UNE-EN 50363-0:2011 (R2019)
Insulating, sheathing and covering materials for low-voltage energy cables -- Part 0: General introduction
5/30/2011 - PDF - Spanish -
Learn More€52.00 -
UNE-EN 50363-3:2006/A1:2011
Insulating, sheathing and covering materials for low voltage energy cables -- Part 3: PVC insulating compounds
5/30/2011 - PDF - English -
Learn More€30.00 -
IEC 60893-3-2:2003/AMD1:2011
IEC 60893-3-2:2003/AMD1:2011 Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
5/27/2011 - PDF - English, French -
Learn More€46.00 -
IEC 62631-1:2011
IEC 62631-1:2011 Dielectric and resistive properties of solid insulating materials - Part 1: General
4/28/2011 - PDF - English, French -
Learn More€132.00 -
UNE-IEC 60050-212:2011
International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases
4/19/2011 - PDF - Spanish -
Learn More€126.00 -
BS EN 60893-3-5:2004+A1:2009
Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Specifications individual Requirements polyester
3/31/2011 - PDF - English -
Learn More€180.00 -
BS EN 60893-3-7:2004+A1:2009
Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Specifications individual Requirements polyimide
3/31/2011 - PDF - English -
Learn More€151.00 -
BS EN 62329-3-102:2010
Heat-shrinkable moulded shapes Specification requirements for shape dimensions, material and compatibility performance. elastomeric shapes, semi-rigid, system performance
2/28/2011 - PDF - English -
Learn More€151.00 -
BS EN 62329-3-101:2010
Heat-shrinkable moulded shapes Specification requirements for shape dimensions, material and compatibility performance. shapes, polyolefin, semi-rigid, limited fire hazard, system performance
2/28/2011 - PDF - English -
Learn More€180.00 -
BS EN 62329-3-100:2010
Heat-shrinkable moulded shapes Specification requirements for shape dimensions, material and compatibility performance. dimensions
2/28/2011 - PDF - English -
Learn More€293.00 -
JIS C 3660-5-1:2011 (R2015)
Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop-point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 degree C - D.C. resistivity at 23 degree C and 100 degree C
1/20/2011 - PDF - Japanese -
Learn More€25.00 -
€25.00
-
IEC 60212:2010
IEC 60212:2010 Standard conditions for use prior to and during the testing of solid electrical insulating materials
12/15/2010 - PDF - English, French -
Learn More€92.00 -
VdS 2134:2010-12
Combustion Heat of Insulating Materials of Cables and Wires - Leaflet for the Calculation of Fire Loads
12/1/2010 - - -
Learn MoreFrom: €6.69 -
IEC 62329-3-101:2010
IEC 62329-3-101:2010 Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance
6/16/2010 - PDF - English, French -
Learn More€92.00 -
IEC 62329-3-102:2010
IEC 62329-3-102:2010 Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance
6/16/2010 - PDF - English, French -
Learn More€46.00 -
IEC 62329-3-100:2010
IEC 62329-3-100:2010 Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 100: Heat-shrinkable moulded shape dimensions
6/16/2010 - PDF - English, French -
Learn More€270.00 -
€293.00 -
€331.00 -
NF EN 60112/A1, C26-220/A1 (05/2010)
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
5/1/2010 - Paper - French -
Learn More€54.50 -
DIN EN 60112 VDE 0303-11:2010-05
Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003 + A1:2009), German version EN 60112:2003 + A1:2009
5/1/2010 - Paper - German -
Learn More€65.60 -
NF EN 60626-2, C26-144-2 (04/2010)
Combined flexible materials for electrical insulation - Part 2 : methods of test
4/1/2010 - Paper - French -
Learn More€88.00 -
IEC TR 60493-2:2010
IEC TR 60493-2:2010 Guide for the statistical analysis of ageing test data - Part 2: Validation of procedures for statistical analysis of censored normally distributed data
3/30/2010 - PDF - English -
Learn More€460.00 -
JIS C 2162:2010 (R2014)
Test method of long-term reliability of gate insulator for SiC devices at high temperature
3/23/2010 - PDF - Japanese -
Learn More€25.00 -
IEC 60893-3-7:2003+AMD1:2009 Edition 2.1
IEC 60893-3-7:2003+AMD1:2009 (Consolidated version) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
11/10/2009 - PDF - English, French -
Learn More€75.00 -
IEC 60893-3-6:2003+AMD1:2009 Edition 2.1
IEC 60893-3-6:2003+AMD1:2009 (Consolidated version) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
11/10/2009 - PDF - English, French -
Learn More€75.00 -
IEC 60893-3-5:2003+AMD1:2009 Edition 2.1
IEC 60893-3-5:2003+AMD1:2009 (Consolidated version) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
10/13/2009 - PDF - English, French -
Learn More€75.00 -
IEC 60893-3-6:2003/AMD1:2009
IEC 60893-3-6:2003/AMD1:2009 Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
9/29/2009 - PDF - English, French -
Learn More€12.00 -
IEC 60626-2:2009
IEC 60626-2:2009 Combined flexible materials for electrical insulation - Part 2: Methods of test
9/29/2009 - PDF - English, French -
Learn More€46.00 -
IEC 60893-3-7:2003/AMD1:2009
IEC 60893-3-7:2003/AMD1:2009 Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
9/29/2009 - PDF - English, French -
Learn More€12.00 -
IEC 60893-3-5:2003/AMD1:2009
IEC 60893-3-5:2003/AMD1:2009 Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
8/28/2009 - PDF - English, French -
Learn More€12.00 -
€72.00 -
€60.00
-
€151.00 -
DIN EN 60216-5 VDE 0304-25:2009-02
Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material (IEC 60216-5:2008), German version EN 60216-5:2008
2/1/2009 - Paper - German -
Learn More€87.98 -
BS EN 60512-16-16:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16p. Torsional strength, fixed male tabs
1/31/2009 - PDF - English -
Learn More€151.00 -
BS EN 60512-16-17:2008
Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts terminations. Test 16q. Tensile compressive strength, fixed male tabs
1/31/2009 - PDF - English -
Learn More€151.00 -
UNE-EN 60626-3:2008
Combined flexible materials for electrical insulation -- Part 3: Specifications for individual materials (Endorsed by AENOR in December of 2008.)
12/1/2008 - PDF - English -
Learn More€110.00 -
NF EN 60626-3, C26-144-3 (11/2008)
Combined flexible materials for electrical insulation - Part 3 : specifications for individual materials
11/1/2008 - Paper - French -
Learn More€170.00 -
UNE-EN 61181:2008
Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
9/17/2008 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 61181:2008
Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
9/17/2008 - PDF - English -
Learn More€81.60 -
UNE-EN 60216-5:2008
Electrical insulating materials - Thermal endurance properties -- Part 5: Determination of relative thermal endurance index (RTE) of an insulating material (Endorsed by AENOR in September of 2008.)
9/1/2008 - PDF - English -
Learn More€68.00 -
NF EN 60216-5, C26-305 (08/2008)
Electrical insulating materials - Thermal endurance properties - Part 5 : determination of relative thermal endurance index (RTE) of an insulating material - Matériaux isolants électriques
8/1/2008 - Paper - French -
Learn More€99.97 -
DIN EN 60085 VDE 0301-1:2008-08
Electrical insulation - Thermal evaluation and designation (IEC 60085:2007); German version EN 60085:2008
8/1/2008 - Paper - German -
Learn More€42.45 -
IEC 60626-3:2008
IEC 60626-3:2008 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials
7/21/2008 - PDF - English, French -
Learn More€397.00 -
€53.00 -
€63.60
-
UNE-EN 60970:2008
Insulating liquids - Methods for counting and sizing particles
5/14/2008 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 60970:2008
Insulating liquids - Methods for counting and sizing particles
5/14/2008 - PDF - English -
Learn More€81.60 -
DIN EN 60587 VDE 0303-10:2008-03
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion (IEC 60587:2007); German version EN 60587:2007
3/1/2008 - Paper - German -
Learn More€53.63 -
UNE-EN 60587:2007
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion (IEC 60587:2007).
12/5/2007 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 60587:2007
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion (IEC 60587:2007).
12/5/2007 - PDF - English -
Learn More€72.00 -
UNE-EN 60450:2005/A1:2007
Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004/A1:2007).
11/28/2007 - PDF - English -
Learn More€32.40 -
UNE-EN 60450:2005/A1:2007
Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004/A1:2007).
11/28/2007 - PDF - Spanish -
Learn More€27.00 -
JIS C 2138:2007 (R2017)
Electrical insulating materials - Methods for the determination of the relative permittivity and dielectric dissipation factor
11/20/2007 - PDF - Japanese -
Learn More€50.18 -
IEC 60085:2007
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
11/7/2007 - PDF - English, French -
Learn More€23.00 -
DIN EN 60426 VDE 0303-6:2007-11
Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods (IEC 60426:2007); German version EN 60426:2007
11/1/2007 - Paper - German -
Learn More€81.46 -
BS EN 60450:2004
Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
10/31/2007 - PDF - English -
Learn More€250.00 -
BS 6469-99-1:1992
Insulating and sheathing materials of electric cables Test methods used in the United Kingdom but not specified BS EN 60811 Non-electrical tests
8/31/2007 - PDF - English -
Learn More€151.00 -
IEEE/IEC 62539:2007
IEC 62539 Ed.1 (IEEE Std 930 (TM)-2004): Guide for the Statistical Analysis of Electrical Insulation Breakdown Data
7/31/2007 - Paper - English -
Learn More€209.00 -
IEEE/IEC 62539:2007
IEC 62539 Ed.1 (IEEE Std 930 (TM)-2004): Guide for the Statistical Analysis of Electrical Insulation Breakdown Data
7/31/2007 - PDF - English -
Learn More€209.00 -
IEC 62539:2007
IEC 62539:2007 Guide for the statistical analysis of electrical insulation breakdown data
7/30/2007 - PDF - English -
Learn More€311.00 -
IEC 60450:2004+AMD1:2007 Edition 2.1
IEC 60450:2004+AMD1:2007 (Consolidated version) Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
7/25/2007 - PDF - English, French -
Learn More€247.00 -
DIN EN 60216-6 VDE 0304-26:2007-06
Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method (IEC 60216-6:2006); German version EN 60216-6:2006
6/1/2007 - Paper - German -
Learn More€116.31 -
IEC 60450:2004/AMD1:2007
IEC 60450:2004/AMD1:2007 Amendment 1 - Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
5/30/2007 - PDF - English, French -
Learn More€12.00 -
JIS C 2134:2007 (R2017)
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
5/20/2007 - PDF - Japanese -
Learn More€36.27 -
UNE-EN 60426:2007
Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods (IEC 60426:2007). (Endorsed by AENOR in April of 2007.)
4/1/2007 - PDF - English -
Learn More€66.00 -
UNE-EN 61033:2006
Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate (IEC 61033:1991 + A1:2006). (Endorsed by AENOR in April of 2007.)
4/1/2007 - PDF - English -
Learn More€60.00 -
BS EN 60426:2007
Electrical insulating materials. Determination of electrolytic corrosion caused by insuating materials. Test methods
3/30/2007 - PDF - English -
Learn More€250.00 -
IEC TR 62422:2007
IEC TR 62422:2007 Environmental characterization of solid insulating materials
3/29/2007 - PDF - English -
Learn More€173.00 -
DIN EN 60216-3 VDE 0304-23:2007-03
Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics (IEC 60216-3:2006); German version EN 60216-3:2006
3/1/2007 - Paper - German -
Learn More€121.28 -
UNE-EN 60216-6:2006
Electrical insulating materials - Thermal endurance properties -- Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method (IEC 60216-6:2006). (Endorsed by AENOR in February of 2007.)
2/1/2007 - PDF - English -
Learn More€87.00 -
BS EN 61033:2006
Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
1/31/2007 - PDF - English -
Learn More€180.00 -
BS EN 61212-2:2006
Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Methods of test
1/31/2007 - PDF - English -
Learn More€250.00 -
BS EN 61061-1:2006
Non-impregnated densified laminated wood for electrical purposes Definitions, designation and general requirements
1/31/2007 - PDF - English -
Learn More€151.00 -
IEC 60426:2007
IEC 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
1/29/2007 - PDF - English -
Learn More€219.00 -
IEC 60426:2007
IEC 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
1/29/2007 - PDF - English, French -
Learn More€219.00 -
ASTM C1616-07(2018) + Redline
Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
1/1/2007 - PDF - English -
Learn More€53.00 -
ASTM C1616-07(2018)
Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
1/1/2007 - PDF - English -
Learn More€46.00 -
NF EN 60216-6, C26-307 (12/2006)
Electrical insulating materials - Thermal endurance properties - Part 6 : determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method - Matériaux isolants électriques
12/1/2006 - Paper - French -
Learn More€136.68 -
DIN EN 60216-4-1 VDE 0304-4-1:2006-12
Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens (IEC 60216-4-1:2006); German version EN 60216-4-1:2006
12/1/2006 - Paper - German -
Learn More€61.54 -
BS EN 61212-3-3:2006
Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Specifications individual materials Round moulded
11/30/2006 - PDF - English -
Learn More€151.00 -
IEC TR 62392:2006
IEC TR 62392:2006 Suitability of typical electrical insulating material (EIM) for polymer recycling
11/8/2006 - PDF - English -
Learn More€132.00 -
IEC 61061-1:2006
IEC 61061-1:2006 Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements
10/25/2006 - PDF - English -
Learn More€23.00 -
IEC 61061-1:2006
IEC 61061-1:2006 Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements
10/25/2006 - PDF - English, French -
Learn More€23.00 -
UNE-EN 60216-3:2006
Electrical insulating materials - Thermal endurance properties -- Part 3: Instructions for calculating thermal endurance characteristics (IEC 60216-3:2006) (Endorsed by AENOR in September of 2006.)
9/1/2006 - PDF - English -
Learn More€88.00 -
BS EN 60464-3-2:2002
Varnishes used for electrical insulation Requirements hot curing impregnating varnishes
8/31/2006 - PDF - English -
Learn More€151.00 -
IEC 61212-3-3:2006
IEC 61212-3-3:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods
8/15/2006 - PDF - English, French -
Learn More€46.00 -
IEC 61212-3-3:2006
IEC 61212-3-3:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods
8/15/2006 - PDF - English -
Learn More€46.00 -
NF EN 60216-4-1, C26-304-1 (08/2006)
Electrical insulating materials - Thermal endurance properties - Part 4-1 : ageing ovens - Single-chamber ovens - Matériaux isolants électriques
8/1/2006 - Paper - English -
Learn More€77.00 -
UNE-EN 60216-4-1:2006
Electrical insulating materials - Thermal endurance properties -- Part 4-1: Ageing ovens - Single-chamber ovens (IEC 60216-4-1:2006). (Endorsed by AENOR in August of 2006.)
8/1/2006 - PDF - English -
Learn More€63.00 -
BS EN 60216-4-1:2006
Electrical insulating materials. Thermal endurance properties Ageing ovens Single-chamber
6/30/2006 - PDF - English -
Learn More€180.00 -
BS EN 60464-3-1:2002
Varnishes used for electrical insulation Specifications individual materials Sheet 1: Ambient curing finishing varnishes
6/30/2006 - PDF - English -
Learn More€151.00 -
BS EN 60455-3-5:2006
Resin based reactive compounds used for electrical insulation Specifications individual materials Unsaturated polyester impregnating resins
5/31/2006 - PDF - English -
Learn More€151.00 -
BS EN 60464-1:1999
Varnishes used for electrical insulation Definitions and general requirements
5/31/2006 - PDF - English -
Learn More€151.00 -
UNE-EN 50363-2-2:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 2-2: Cross-linked elastomeric covering compounds
5/10/2006 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 50363-2-1:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 2-1: Cross-linked elastomeric sheathing compounds
5/10/2006 - PDF - Spanish -
Learn More€49.00 -
UNE-EN 50363-3:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 3: PVC insulating compounds
5/10/2006 - PDF - English -
Learn More€46.80 -
UNE-EN 50363-1:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 1: Cross-linked elastomeric insulating compounds
5/10/2006 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 50363-2-2:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 2-2: Cross-linked elastomeric covering compounds
5/10/2006 - PDF - English -
Learn More€46.80 -
UNE-EN 50363-2-1:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 2-1: Cross-linked elastomeric sheathing compounds
5/10/2006 - PDF - English -
Learn More€58.80 -
UNE-EN 50363-1:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 1: Cross-linked elastomeric insulating compounds
5/10/2006 - PDF - English -
Learn More€55.20 -
UNE-EN 50363-3:2006 (R2019)
Insulating, sheathing and covering materials for low voltage energy cables -- Part 3: PVC insulating compounds
5/10/2006 - PDF - Spanish -
Learn More€39.00 -
IEC 60464-3-2:2001/AMD1:2006
IEC 60464-3-2:2001/AMD1:2006 Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes
4/27/2006 - PDF - English, French -
Learn More€12.00 -
IEC 61033:1991/AMD1:2006
IEC 61033:1991/AMD1:2006 Amendment 1 - Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
4/27/2006 - PDF - English, French -
Learn More€12.00 -
IEC 60464-3-2:2001/AMD1:2006
IEC 60464-3-2:2001/AMD1:2006 Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes
4/27/2006 - PDF - English -
Learn More€12.00 -
IEC 61212-2:2006
IEC 61212-2:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test
4/10/2006 - PDF - English, French -
Learn More€173.00 -
IEC 61212-2:2006
IEC 61212-2:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test
4/10/2006 - PDF - English -
Learn More€173.00 -
DIN EN 60216-2 VDE 0304-22:2006-04
Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria (IEC 60216-2:2005); German version EN 60216-2:2005
4/1/2006 - Paper - German -
Learn More€57.53 -
IEC 61212-1:2006
IEC 61212-1:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
3/8/2006 - PDF - English -
Learn More€46.00 -
IEC 61212-1:2006
IEC 61212-1:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
3/8/2006 - PDF - English, French -
Learn More€46.00 -
IEC 60455-3-5:2006
IEC 60455-3-5:2006 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins
3/8/2006 - PDF - English, French -
Learn More€46.00 -
JIS C 2137:2006 (R2015)
Electrical insulating materials - Method to evaluate the resistance to tracking and erosion - Rotating wheel dip test
2/20/2006 - PDF - Japanese -
Learn More€25.00 -
BS 6469-99.2:1992
Insulating and sheathing materials of electric cables. Test methods used in the United Kingdom but not specified BS EN 60811 Electrical tests
1/20/2006 - PDF - English -
Learn More€151.00 -
IEC 60216-4-1:2006
IEC 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
1/19/2006 - PDF - English -
Learn More€132.00 -
IEC 60464-2:2001/AMD1:2006
IEC 60464-2:2001/AMD1:2006 Amendment 1 - Varnishes used for electrical insulation - Part 2: Methods of test
1/17/2006 - PDF - English -
Learn More€12.00 -
IEC 60464-1:1998/AMD1:2006
IEC 60464-1:1998/AMD1:2006 Amendment 1 - Varnishes used for electrical insulation - Part 1: Definitions and general requirements
1/17/2006 - PDF - English, French -
Learn More€12.00 -
IEC 60464-1:1998/AMD1:2006
IEC 60464-1:1998/AMD1:2006 Amendment 1 - Varnishes used for electrical insulation - Part 1: Definitions and general requirements
1/17/2006 - PDF - English -
Learn More€12.00 -
IEC 60464-2:2001/AMD1:2006
IEC 60464-2:2001/AMD1:2006 Amendment 1 - Varnishes used for electrical insulation - Part 2: Methods of test
1/17/2006 - PDF - English, French -
Learn More€12.00 -
IEC 60464-3-1:2001/AMD1:2006
IEC 60464-3-1:2001/AMD1:2006 Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes
1/17/2006 - PDF - English -
Learn More€12.00 -
IEC 60464-3-1:2001/AMD1:2006
IEC 60464-3-1:2001/AMD1:2006 Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes
1/17/2006 - PDF - English, French -
Learn More€12.00 -
BS EN 60216-2:2005
Electrical insulating materials. Thermal endurance properties Determination of thermal electrical Choice test criteria
12/2/2005 - PDF - English -
Learn More€180.00 -
UNE-EN 60216-2:2005
Electrical insulating materials - Thermal endurance properties -- Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria (Endorsed by AENOR in December of 2005.)
12/1/2005 - PDF - English -
Learn More€76.00 -
UNE-EN 60450:2005
Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
11/16/2005 - PDF - English -
Learn More€82.80 -
UNE-EN 60450:2005
Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
11/16/2005 - PDF - Spanish -
Learn More€69.00 -
IEC 60216-2:2005
IEC 60216-2:2005 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
8/11/2005 - PDF - English, French -
Learn More€92.00 -
IEEE 930:2004 (R2010)
(Replaced) IEEE Guide for the Statistical Analysis of Electrical Insulation Breakdown Data
4/1/2005 - PDF - English -
Learn More€209.00 -
UNE-IEC/TR 60893-4:2005
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
2/9/2005 - PDF - Spanish -
Learn More€60.00 -
DIN VDE 0207 Beiblatt 1 VDE 0207 Beiblatt 1:2005-02
Insulating and sheathing compounds for cables and flexible cords - List of the standards of the series DIN VDE 0207 (VDE 0207)
2/1/2005 - Paper - German -
Learn More€38.31 -
UNE-EN 60893-3-4:2004
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
12/17/2004 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 60893-3-3:2004
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
12/17/2004 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 60893-3-4:2004
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
12/17/2004 - PDF - English -
Learn More€81.60 -
UNE-EN 60893-3-3:2004
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
12/17/2004 - PDF - English -
Learn More€72.00 -
UNE-EN 60893-1:2004
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 1: Definitions, designations and general requirements
10/8/2004 - PDF - Spanish -
Learn More€52.00 -
UNE-EN 60893-1:2004
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 1: Definitions, designations and general requirements
10/8/2004 - PDF - English -
Learn More€62.40 -
DIN EN 60544-4 VDE 0306-4:2004-06
Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments (IEC 60544-4:2003); German version EN 60544-4:2003
6/1/2004 - Paper - German -
Learn More€45.89 -
BS EN 61006:2004
Electrical insulating materials. Methods of test for the determination of the glass transition temperature
5/28/2004 - PDF - English -
Learn More€250.00 -
BS EN 60893-1:2004
Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Definitions, designations and general requirements
5/12/2004 - PDF - English -
Learn More€151.00 -
IEC 60450:2004
IEC 60450:2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
4/19/2004 - PDF - English, French -
Learn More€173.00 -
IEC 60893-1:2004
IEC 60893-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
1/26/2004 - PDF - English, French -
Learn More€46.00 -
UNE-EN 60544-4:2003
Electrical insulating materials - Determination of the effects of ionizing radiation -- Part 4: Classification system for service in radiation environments (Endorsed by AENOR in January of 2004.)
1/1/2004 - PDF - English -
Learn More€58.00 -
BS EN 60544-4:2003
Electrical insulating materials. Determination of the effects ionizing radiation Classification system for service in environments
12/15/2003 - PDF - English -
Learn More€180.00 -
IEC 60893-3-4:2003
IEC 60893-3-4:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
11/14/2003 - PDF - English, French -
Learn More€92.00 -
IEC 60893-3-2:2003
IEC 60893-3-2:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
11/14/2003 - PDF - English, French -
Learn More€92.00 -
IEC 60893-3-7:2003
IEC 60893-3-7:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
11/14/2003 - PDF - English, French -
Learn More€46.00 -
IEC 60893-3-5:2003
IEC 60893-3-5:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
11/14/2003 - PDF - English, French -
Learn More€46.00 -
IEC 60893-3-3:2003
IEC 60893-3-3:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
11/14/2003 - PDF - English, French -
Learn More€46.00 -
IEC 60893-3-6:2003
IEC 60893-3-6:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
11/14/2003 - PDF - English, French -
Learn More€46.00 -
JIS C 3660-1-2:2003 (R2013)
Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-2: Methods for general application - Thermal ageing methods
9/20/2003 - PDF - Japanese -
Learn More€25.00 -
JIS C 3660-1-4:2003 (R2013)
Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-4: Methods for general application - Test at low temperature
9/20/2003 - PDF - Japanese -
Learn More€25.00 -
JIS C 3660-1-1:2003 (R2013)
Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
9/20/2003 - PDF - Japanese -
Learn More€25.00 -
JIS C 3660-1-3:2003 (R2013)
Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: Methods for general application - Methods for determining the density - Water absorption tests - Shrinkage test
9/20/2003 - PDF - Japanese -
Learn More€25.00 -
BS EN 60455-3-2:2003
Resin based reactive compounds used for electrical insulation. Specifications individual materials Quartz filled epoxy resinous
8/1/2003 - PDF - English -
Learn More€151.00 -
BS EN 60455-3-3:2003
Resin based reactive compounds used for electrical insulation. Specifications individual materials Unfilled polyurethane
8/1/2003 - PDF - English -
Learn More€151.00 -
NF EN 60112, C26-220 (08/2003)
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
8/1/2003 - Paper - French -
Learn More€103.33 -
BS EN 60455-3-1:2003
Resin based reactive compounds used for electrical insulation. Specifications individual materials Unfilled epoxy resinous
8/1/2003 - PDF - English -
Learn More€151.00 -
BS EN 60455-3-4:2003
Resin based reactive compounds used for electrical insulation. Specifications individual materials Filled polyurethane
7/31/2003 - PDF - English -
Learn More€151.00 -
IEC 60544-4:2003
IEC 60544-4:2003 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments
7/11/2003 - PDF - English, French -
Learn More€46.00 -
IEC 60455-3-3:2003
IEC 60455-3-3:2003 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds
4/28/2003 - PDF - English, French -
Learn More€23.00 -
IEC 60455-3-1:2003
IEC 60455-3-1:2003 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds
4/28/2003 - PDF - English, French -
Learn More€23.00 -
IEC 60455-3-4:2003
IEC 60455-3-4:2003 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds
4/28/2003 - PDF - English, French -
Learn More€23.00 -
IEC 60455-3-2:2003
IEC 60455-3-2:2003 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds
4/28/2003 - PDF - English, French -
Learn More€23.00 -
UNE-EN 61061-2:2001 CORR:2002
Specification for non-impregnated, densified laminated wood for electrical purposes -- Part 2: Methods of test (Endorsed by AENOR in May of 2002.)
5/1/2002 - PDF - English -
Learn More€0.00 -
BS EN 61061-2:2001
Non-impregnated densified laminated wood for electrical purposes Methods of test
4/2/2002 - PDF - English -
Learn More€180.00 -
BS EN 61061-3-2:2002
Non-impregnated densified laminated wood for electrical purposes. Specification individual materials Rings produced from beech veneer
2/14/2002 - PDF - English -
Learn More€151.00 -
UNE-EN 61061-3-2:2001
Non-impregnated densified laminated wood for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Rings produced from beech veneer. (Endorsed by AENOR in February of 2002.)
2/1/2002 - PDF - English -
Learn More€28.00 -
UNE-EN 61061-2:2001
Specification for non-impregnated, densified laminated wood for electrical purposes -- Part 2: Methods of test. (Endorsed by AENOR in February of 2002.)
2/1/2002 - PDF - English -
Learn More€69.00 -
UNE-EN 61061-2:2001/A1:2001
Specification for non-impregnated, densified laminated wood for electrical purposes - Part 2: Methods of test. (Endorsed by AENOR in February of 2002.)
2/1/2002 - PDF - English -
Learn More€16.00 -
UNE-EN 60216-4-2:2001
Electrical insulating materials - Thermal endurance properties -- Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C.
11/23/2001 - PDF - Spanish -
Learn More€63.00 -
UNE-EN 60216-4-2:2001
Electrical insulating materials - Thermal endurance properties -- Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C.
11/23/2001 - PDF - English -
Learn More€75.60
