29.035 : Insulating materials

Items 1 to 200 of 2314 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  • IEC 60667-2:2020

    IEC 60667-2:2020 Vulcanized fibre for electrical purposes - Part 2: Methods of test
    5/13/2020 - PDF - English, French - IEC
    Learn More
    €71.00

  • IEC 60050-212:2010/AMD3:2020

    IEC 60050-212:2010/AMD3:2020 Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases
    4/23/2020 - PDF - English, French - IEC
    Learn More
    €10.00

  • IEC 60667-1:2020

    IEC 60667-1:2020 Vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements
    4/9/2020 - PDF - English, French - IEC
    Learn More
    €41.00

  • 20/30416463 DC:2020

    BS EN 60684-3-281. Flexible insulating sleeving Part 3. Specifications for individual types of sleeving. Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive
    4/9/2020 - PDF - English - BSI
    Learn More
    €23.70

  • 20/30416467 DC:2020

    BS EN 60684-3-282. Flexible insulating sleeving Part 3. Specifications for individual types of sleeving. Sheet 282: Heat-shrinkable, polyolefin Stress control
    4/9/2020 - PDF - English - BSI
    Learn More
    €23.70

  • PR NF EN IEC 60216-3, C26-303PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €116.51

  • PR NF EN IEC 60674-3-1, C26-145-3-1PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €61.17

  • BS EN 4840-102:2019

    Aerospace series. Heat shrinkable moulded shapes Elastomeric, semi-rigid, temperature range -75 to 150 °C. Product Standard
    3/27/2020 - PDF - English - BSI
    Learn More
    €130.35

  • IEC 60667-3-1:2020

    IEC 60667-3-1:2020 Vulcanized fibre for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Flat sheets
    3/25/2020 - PDF - English, French - IEC
    Learn More
    €20.00

  • 20/30406248 DC:2020

    BS EN IEC 61837-2 AMD1. Surface mounted piezoelectric devices for frequency control and selection. Standard outlines terminal lead connections Part 2. Ceramic enclosures
    3/20/2020 - PDF - English - BSI
    Learn More
    €23.70

  • ASTM D3874-20

    Standard Test Method for Ignition of Materials by Hot Wire Sources
    3/1/2020 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D3874-20 + Redline

    Standard Test Method for Ignition of Materials by Hot Wire Sources
    3/1/2020 - PDF - English - ASTM
    Learn More
    €56.00

  • BS EN 60455-2:2015 + Redline

    Tracked Changes. Resin based reactive compounds used for electrical insulation Methods of test
    2/26/2020 - PDF - English - BSI
    Learn More
    €369.72

  • BS EN 50200:2015 + Redline

    Tracked Changes. Method of test for resistance to fire of unprotected small cables for use in emergency circuits
    2/25/2020 - PDF - English - BSI
    Learn More
    €329.67

  • BS EN 50290-2-29:2016 + Redline

    Tracked Changes. Communication cables Common design rules and construction. Crosslinked polyethylene insulation compounds: instrumentation, control field bus
    2/25/2020 - PDF - English - BSI
    Learn More
    €169.46

  • BS EN IEC 60674-3-2:2019 + Redline

    Tracked Changes. Specification for plastic films electrical purposes Specifications individual materials. Requirements balanced biaxially oriented polyethylene terephthalate (PET) used insulation
    2/24/2020 - PDF - English - BSI
    Learn More
    €200.27

  • ASTM D1048-20

    Standard Specification for Rubber Insulating Blankets
    2/1/2020 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D1048-20 + Redline

    Standard Specification for Rubber Insulating Blankets
    2/1/2020 - PDF - English - ASTM
    Learn More
    €56.00

  • DIN EN 60674-2 VDE 0345-2:2020-02

    Specification for plastic films for electrical purposes - Part 2: Methods of test (IEC 60674-2:2016 + COR1:2017 + A1:2019); German version EN 60674-2:2017 + AC:2018 + A1:2019
    2/1/2020 - Paper - German - VDE
    Learn More
    €125.79

  • ASTM D1711-20

    Standard Terminology Relating to Electrical Insulation
    1/1/2020 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM D1711-20 + Redline

    Standard Terminology Relating to Electrical Insulation
    1/1/2020 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM D3755-20

    Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
    1/1/2020 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D3755-20 + Redline

    Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
    1/1/2020 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM D149-20

    Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
    1/1/2020 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM D149-20 + Redline

    Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
    1/1/2020 - PDF - English - ASTM
    Learn More
    €62.00

  • 20/30366459 DC:2019

    BS EN IEC 60216-6. Electrical insulating materials. Thermal endurance properties Part 6. Determination of thermal indices (TI and RTI) an material using the fixed time frame method
    12/27/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30406660 DC:2019

    BS EN IEC 60455-2. Resin based reactive compounds used for electrical insulation Part 2. Methods of test
    12/6/2019 - PDF - English - BSI
    Learn More
    €23.70

  • UNE-EN IEC 60684-3-214:2019

    Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall (Endorsed by Asociación Española de Normalización in November of 2019.)
    11/1/2019 - PDF - English - AENOR
    Learn More
    €64.00

  • UNE-EN IEC 60684-3-216:2019

    Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving (Endorsed by Asociación Española de Normalización in November of 2019.)
    11/1/2019 - PDF - English - AENOR
    Learn More
    €66.00

  • UNE-EN IEC 60684-3-247:2019

    Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall (Endorsed by Asociación Española de Normalización in November of 2019.)
    11/1/2019 - PDF - English - AENOR
    Learn More
    €65.00

  • UNE-EN IEC 60684-3-280:2019

    Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking (Endorsed by Asociación Española de Normalización in November of 2019.)
    11/1/2019 - PDF - English - AENOR
    Learn More
    €64.00

  • UNE-EN IEC 60684-3-283:2019

    Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation (Endorsed by Asociación Española de Normalización in November of 2019.)
    11/1/2019 - PDF - English - AENOR
    Learn More
    €64.00

  • ASTM D710-19

    Standard Specification for Vulcanized Fibre Sheets, Rolls, Rods, and Tubes Used for Electrical Insulation
    11/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D710-19 + Redline

    Standard Specification for Vulcanized Fibre Sheets, Rolls, Rods, and Tubes Used for Electrical Insulation
    11/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM D2519-19a

    Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
    11/1/2019 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D2519-19a + Redline

    Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
    11/1/2019 - PDF - English - ASTM
    Learn More
    €48.00

  • ASTM D1932-19

    Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes
    11/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D1932-19 + Redline

    Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes
    11/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • UNE-EN IEC 61333:2019

    Marking on ferrite cores (Endorsed by Asociación Española de Normalización in November of 2019.)
    11/1/2019 - PDF - English - AENOR
    Learn More
    €60.00

  • BS EN IEC 60684-3-247:2019

    Flexible insulating sleeving Specifications for individual types of sleeving. Sheet 247. Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall
    10/25/2019 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN IEC 60684-3-283:2019

    Flexible insulating sleeving Specifications for individual types of sleeving. Sheet 283: Heat-shrinkable, polyolefin bus-bar insulation
    10/25/2019 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN IEC 60684-3-280:2019

    Flexible insulating sleeving Specifications for individual types of - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
    10/24/2019 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN IEC 60684-3-216:2019

    Flexible insulating sleeving Specifications for individual types of sleeving. Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard
    10/23/2019 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN IEC 60684-3-214:2019

    Flexible insulating sleeving Specifications for individual types of sleeving. Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall
    10/23/2019 - PDF - English - BSI
    Learn More
    €154.05

  • UNE-EN IEC 60376:2019

    Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipment
    10/23/2019 - PDF - Spanish - AENOR
    Learn More
    €57.00

  • UNE-EN IEC 60376:2019

    Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipment
    10/23/2019 - PDF - English - AENOR
    Learn More
    €68.00

  • 19/30366455 DC:2019

    BS EN IEC 60216-5. Electrical insulating materials. Thermal endurance properties Part 5. Determination of relative temperature index (RTI) an material
    10/18/2019 - PDF - English - BSI
    Learn More
    €23.70

  • BS EN IEC 61333:2019

    Marking on ferrite cores
    10/16/2019 - PDF - English - BSI
    Learn More
    €130.35

  • PD IEC TR 61244-4:2019

    Determination of long-term radiation ageing in polymers Effects different temperatures and dose rates under condition
    10/11/2019 - PDF - English - BSI
    Learn More
    €253.59

  • 19/30363278 DC:2019

    BS EN IEC 60372. Locking devices for ball and socket couplings of string insulator units. Dimensions and tests
    10/4/2019 - PDF - English - BSI
    Learn More
    €23.70

  • NF EN IEC 60684-3-216, C93-643-216 (10/2019)

    Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuille 216: Gaines thermorétractables, ignifugées, au risque de feu limité
    10/1/2019 - Paper - French - AFNOR
    Learn More
    €74.67

  • NF EN IEC 60684-3-214, C93-643-214 (10/2019)

    Gaines isolantes souples - Partie 3 : Spécifications pour types particuliers de gaines - Feuille 214 : gaines thermorétractables en polyoléfine, non ignifugées, à paroi épaisse et moyenne
    10/1/2019 - Paper - French - AFNOR
    Learn More
    €74.67

  • NF EN IEC 60684-3-247, C93-643-247 (10/2019)

    Gaines isolantes souples - Partie 3 : spécifications pour types particuliers de gaines - Feuille 247 : gaines thermorétractables en polyoléfine, à double paroi (épaisse et moyenne), non ignifugées
    10/1/2019 - Paper - French - AFNOR
    Learn More
    €74.67

  • NF EN IEC 60684-3-283, C93-643-283 (10/2019)

    Gaines isolantes souples - Partie 3 : spécifications pour types particuliers de gaines - Feuille 283 : gaines thermorétractables en polyoléfine pour isolation de barre omnibus
    10/1/2019 - Paper - French - AFNOR
    Learn More
    €74.67

  • NF EN IEC 60684-3-280, C93-643-280 (10/2019)

    Gaines isolantes souples - Partie 3 : spécifications pour types particuliers de gaines - Feuille 280 : gaines thermorétractables, en polyoléfine, anticheminement
    10/1/2019 - Paper - French - AFNOR
    Learn More
    €74.67

  • IEC TR 61244-4:2019

    IEC TR 61244-4:2019 Determination of long-term radiation ageing in polymers - Part 4: Effects of different temperatures and dose rates under radiation conditions
    9/25/2019 - PDF - English - IEC
    Learn More
    €208.00

  • 19/30371735 DC:2019

    BS EN IEC 62631-3-1. Dielectric and resistive properties of solid insulating materials Part 3-1. Determination (DC methods). Volume resistance volume resistivity. General method
    9/13/2019 - PDF - English - BSI
    Learn More
    €23.70

  • IEC 60684-3-280:2019

    IEC 60684-3-280:2019 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
    8/20/2019 - PDF - English, French - IEC
    Learn More
    €71.00

  • IEC 60684-3-283:2019

    IEC 60684-3-283:2019 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation
    8/20/2019 - PDF - English, French - IEC
    Learn More
    €71.00

  • IEC 60684-3-280:2019 + Redline

    IEC 60684-3-280:2019 (Redline version) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
    8/20/2019 - PDF - English - IEC
    Learn More
    €92.00

  • IEC 60684-3-283:2019 + Redline

    IEC 60684-3-283:2019 (Redline version) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation
    8/20/2019 - PDF - English - IEC
    Learn More
    €92.00

  • BS EN IEC 60674-3-2:2019

    Specification for plastic films electrical purposes Specifications individual materials. Requirements balanced biaxially oriented polyethylene terephthalate (PET) used insulation
    8/14/2019 - PDF - English - BSI
    Learn More
    €154.05

  • IEC 60684-3-214:2019

    IEC 60684-3-214:2019 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall
    8/8/2019 - PDF - English, French - IEC
    Learn More
    €71.00

  • IEC 60684-3-216:2019

    IEC 60684-3-216:2019 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving
    8/8/2019 - PDF - English, French - IEC
    Learn More
    €71.00

  • IEC 60684-3-247:2019

    IEC 60684-3-247:2019 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall
    8/8/2019 - PDF - English, French - IEC
    Learn More
    €71.00

  • IEC 60684-3-247:2019 + Redline

    IEC 60684-3-247:2019 (Redline version) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall
    8/8/2019 - PDF - English - IEC
    Learn More
    €92.00

  • IEC 60684-3-216:2019 + Redline

    IEC 60684-3-216:2019 (Redline version) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving
    8/8/2019 - PDF - English - IEC
    Learn More
    €92.00

  • IEC 60684-3-214:2019 + Redline

    IEC 60684-3-214:2019 (Redline version) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall
    8/8/2019 - PDF - English - IEC
    Learn More
    €92.00

  • BS IEC 62899-502-2:2019

    Printed electronics Quality assessment. Organic light emitting diode (OLED) elements. Combined mechanical and environmental stress test methods for flexible OLED elements
    8/2/2019 - PDF - English - BSI
    Learn More
    €215.67

  • ASTM D2132-19

    Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
    8/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D2132-19 + Redline

    Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
    8/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • UNE-EN IEC 62677-3-103:2019

    Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications (Endorsed by Asociación Española de Normalización in August of 2019.)
    8/1/2019 - PDF - English - AENOR
    Learn More
    €63.00

  • ASTM D1051-19

    Standard Specification for Rubber Insulating Sleeves
    8/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D1051-19 + Redline

    Standard Specification for Rubber Insulating Sleeves
    8/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM D2148-19

    Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
    8/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D2148-19 + Redline

    Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
    8/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM D69-19 + Redline

    Standard Test Methods for Friction Tapes
    8/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM D69-19

    Standard Test Methods for Friction Tapes
    8/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • IEC 62899-502-2:2019

    IEC 62899-502-2:2019 Printed electronics - Part 502-2: Quality assessment - Organic light emitting diode (OLED) elements - Combined mechanical and environmental stress test methods for flexible OLED elements
    7/24/2019 - PDF - English - IEC
    Learn More
    €147.00

  • BS EN IEC 62677-3-103:2019

    Heat-shrinkable low and medium voltage moulded shapes Specification for individual materials. Sheet 103: Heat-shrinkable, polyolefin, conductive applications
    7/18/2019 - PDF - English - BSI
    Learn More
    €154.05

  • PR NF EN IEC 60455-3-8, C26-163-8PR (07/2019)

    Composés réactifs à base de résines utilisés comme isolants électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 8 : Résines pour accessoires de câble
    7/1/2019 - Paper - English, French - AFNOR
    Learn More
    €68.89

  • €60.85

  • UNE-EN IEC 60674-3-2:2019

    Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation (Endorsed by Asociación Española de Normalización in July of 2019.)
    7/1/2019 - PDF - English - AENOR
    Learn More
    €62.00

  • 19/30398401 DC:2019

    BS EN 60216-3. Electrical insulating materials. Thermal endurance properties Part 3. Instructions for calculating thermal characteristics
    6/27/2019 - PDF - English - BSI
    Learn More
    €23.70

  • BS IEC 62899-204:2019

    Printed electronics Materials. Insulator ink. Measurement methods of properties insulator inks and printed insulating layers
    6/7/2019 - PDF - English - BSI
    Learn More
    €215.67

  • PR NF EN IEC 60667-1, C26-667-1PR (06/2019)

    Fibres vulcanisées à usages électriques - Partie 1: Définitions et exigences générales
    6/1/2019 - Paper - French - AFNOR
    Learn More
    €32.51

  • PR NF EN IEC 60667-2, C26-667-2PR (06/2019)

    Fibres vulcanisées à usages électriques. Partie 2 : Méthodes d'essai
    6/1/2019 - Paper - French - AFNOR
    Learn More
    €52.27

  • PR NF EN IEC 60667-3-1, C26-667-3PR (06/2019)

    Fibres vulcanisées à usages électriques - Partie 3 : Spécifications pour matériaux individuels - Feuille 1 : Feuilles planes
    6/1/2019 - Paper - French - AFNOR
    Learn More
    €32.51

  • NF EN IEC 60674-3-2, C26-145-3-2 (06/2019)

    Spécification pour les films en matière plastique à usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 2 : exigences pour les films de polyéthylène-téréphtalate (PET), à orientation biaxe équilibrée, utilisés dans l'isolation électrique - Spécification pour les films en matière plastique à usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 2: Exigences pour les films de polyéthylène-téréphtalate (PET), à orientation biaxe équilibrée, utilisés dans l'isolation électrique
    6/1/2019 - Paper - French - AFNOR
    Learn More
    €74.67

  • BS EN 60674-2:2017+A1:2019

    Specification for plastic films electrical purposes Methods of test
    5/20/2019 - PDF - English - BSI
    Learn More
    €284.40

  • BS EN IEC 62631-3-4:2019

    Dielectric and resistive properties of solid insulating materials Determination (DC methods). Volume resistance volume resistivity at elevated temperatures
    5/15/2019 - PDF - English - BSI
    Learn More
    €154.05

  • IEC 62677-3-103:2019

    IEC 62677-3-103:2019 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications
    5/14/2019 - PDF - English, French - IEC
    Learn More
    €41.00

  • NF EN IEC 62631-3-4, C26-631-3-4 (05/2019)

    Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-4 : détermination des propriétés résistives (méthodes en courant continu) - Résistance transversale et résistivité transversale aux températures élevées - Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-4 : Détermination des propriétés résistives (méthodes en courant continu) - Résistance transversale et résistivité transversale aux températures élevées
    5/1/2019 - Paper - French - AFNOR
    Learn More
    €74.67

  • ASTM F1236-19

    Standard Guide for Visual Inspection of Electrical Protective Rubber Products
    5/1/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F1236-19 + Redline

    Standard Guide for Visual Inspection of Electrical Protective Rubber Products
    5/1/2019 - PDF - English - ASTM
    Learn More
    €62.00

  • UNE-EN 60674-2:2017/A1:2019

    Specification for plastic films for electrical purposes - Part 2: Methods of test (Endorsed by Asociación Española de Normalización in May of 2019.)
    5/1/2019 - PDF - English - AENOR
    Learn More
    €24.00

  • ASTM D3636-19

    Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
    4/1/2019 - PDF - English - ASTM
    Learn More
    €73.00

  • ASTM D3636-19 + Redline

    Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
    4/1/2019 - PDF - English - ASTM
    Learn More
    €87.00

  • 19/30368755 DC:2019

    BS EN IEC 60893-2. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 2. Methods of test
    4/1/2019 - PDF - English - BSI
    Learn More
    €23.70

  • NF EN 60674-2/A1, C26-145-2/A1 (04/2019)

    Spécifications relatives aux films plastiques à usages électriques - Partie 2 : méthodes d'essai - Spécifications relatives aux films plastiques à usages électriques - Partie 2 : Méthodes d'essai
    4/1/2019 - Paper - French - AFNOR
    Learn More
    €46.44

  • IEC 62631-3-4:2019

    IEC 62631-3-4:2019 Dielectric and resistive properties of solid insulating materials - Part 3-4: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity at elevated temperatures
    3/28/2019 - PDF - English, French - IEC
    Learn More
    €71.00

  • ASTM D3850-19

    Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
    3/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D3850-19 + Redline

    Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
    3/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM D3426-19

    Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
    3/1/2019 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D3426-19 + Redline

    Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
    3/1/2019 - PDF - English - ASTM
    Learn More
    €48.00

  • ASTM D2655-19

    Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V, 90°C Operation
    3/1/2019 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D2655-19 + Redline

    Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V, 90°C Operation
    3/1/2019 - PDF - English - ASTM
    Learn More
    €48.00

  • ASTM D2686-19

    Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape
    3/1/2019 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D2686-19 + Redline

    Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape
    3/1/2019 - PDF - English - ASTM
    Learn More
    €48.00

  • ASTM D5213-19

    Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications
    3/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D5213-19 + Redline

    Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications
    3/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • IEC 60674-2:2016/AMD1:2019

    IEC 60674-2:2016/AMD1:2019 Amendment 1 - Specification for plastic films for electrical purposes - Part 2: Methods of test
    1/24/2019 - PDF - English, French - IEC
    Learn More
    €10.00

  • IEC 60674-2:2016+AMD1:2019 Edition 2.1

    IEC 60674-2:2016+AMD1:2019 (Consolidated version) Specification for plastic films for electrical purposes - Part 2: Methods of test
    1/24/2019 - PDF - English, French - IEC
    Learn More
    €355.00

  • BS IEC 62899-202-3:2019

    Printed electronics Materials. Conductive ink. Measurement of sheet resistance conductive films. Contactless method
    1/23/2019 - PDF - English - BSI
    Learn More
    €154.05

  • UNE-EN 60811-501:2012/A1:2019

    Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
    1/23/2019 - PDF - Spanish - AENOR
    Learn More
    €29.00

  • UNE-EN 60811-501:2012/A1:2019

    Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
    1/23/2019 - PDF - English - AENOR
    Learn More
    €34.00

  • 19/30390165 DC:2019

    BS EN 60674-3-1. Plastic films for electrical purposes Part 3. Specifications individual materials. Sheet 1. Biaxially oriented polypropylene (PP) film capacitors
    1/17/2019 - PDF - English - BSI
    Learn More
    €23.70

  • IEC 60674-3-2:2019

    IEC 60674-3-2:2019 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation
    1/16/2019 - PDF - English, French - IEC
    Learn More
    €71.00

  • BS IEC 62899-201:2016+A1:2018

    Printed electronics Materials. Substrates
    1/3/2019 - PDF - English - BSI
    Learn More
    €300.99

  • ASTM D178-19 + Redline

    Standard Specification for Rubber Insulating Matting
    1/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM D178-19

    Standard Specification for Rubber Insulating Matting
    1/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D3251-19

    Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
    1/1/2019 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D3251-19 + Redline

    Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
    1/1/2019 - PDF - English - ASTM
    Learn More
    €48.00

  • DIN EN IEC 62631-2-1:2018-12

    Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods (IEC 62631-2-1:2018); German version EN IEC 62631-2-1:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €108.80

  • DIN EN 60216-3 VDE 0304-23:2018-12

    Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics (IEC 112/428/CD:2018); Text in German and English
    12/1/2018 - Paper - German - VDE
    Learn More
    €53.63

  • DIN EN 4840-002:2018-12

    Aerospace series - Heat shrinkable moulded shapes - Part 002: Index of product standards and product dimensions; German and English version FprEN 4840-002:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €103.00

  • BS EN 60811-501:2012+A1:2018

    Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Tests determining the mechanical properties of insulating sheathing compounds
    11/19/2018 - PDF - English - BSI
    Learn More
    €215.67

  • IEC 62899-201:2016/AMD1:2018

    IEC 62899-201:2016/AMD1:2018 Amendment 1 - Printed electronics - Part 201: Materials - Substrates
    11/15/2018 - PDF - English - IEC
    Learn More
    €71.00

  • IEC 62899-201:2016+AMD1:2018 Edition 1.1

    IEC 62899-201:2016+AMD1:2018 (Consolidated version) Printed electronics - Part 201: Materials - Substrates
    11/15/2018 - PDF - English - IEC
    Learn More
    €406.00

  • ASTM D5537-18

    Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
    11/1/2018 - PDF - English - ASTM
    Learn More
    €67.00

  • ASTM D5537-18 + Redline

    Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
    11/1/2018 - PDF - English - ASTM
    Learn More
    €80.00

  • ASTM D6194-18

    Standard Test Method for Glow-Wire Ignition of Materials
    11/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D6194-18 + Redline

    Standard Test Method for Glow-Wire Ignition of Materials
    11/1/2018 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM D5424-18

    Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
    11/1/2018 - PDF - English - ASTM
    Learn More
    €67.00

  • ASTM D5424-18 + Redline

    Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
    11/1/2018 - PDF - English - ASTM
    Learn More
    €80.00

  • ASTM D3756-18

    Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields
    11/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D3756-18 + Redline

    Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields
    11/1/2018 - PDF - English - ASTM
    Learn More
    €56.00

  • DIN EN 4840-001:2018-11

    Aerospace series - Heat shrinkable moulded shapes - Part 001: Technical specification; German and English version EN 4840-001:2018
    11/1/2018 - PDF - English, German - DIN
    Learn More
    €61.70

  • ASTM D3145-18

    Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
    11/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D3145-18 + Redline

    Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
    11/1/2018 - PDF - English - ASTM
    Learn More
    €48.00

  • ASTM D5638-18

    Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes
    11/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D5638-18 + Redline

    Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes
    11/1/2018 - PDF - English - ASTM
    Learn More
    €48.00

  • ASTM D4880-18

    Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire
    11/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D4880-18 + Redline

    Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire
    11/1/2018 - PDF - English - ASTM
    Learn More
    €48.00

  • VG 95343-13:2018-10

    Heat shrinkable components - Part 13: Compatibility test for component groups, requirements, tests; Text in German and English
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €112.00

  • UNE-EN 4840-001:2018

    Aerospace series - Heat shrinkable moulded shapes - Part 001: Technical specification (Endorsed by Asociación Española de Normalización in October of 2018.)
    10/1/2018 - PDF - English - AENOR
    Learn More
    €46.00

  • NBN EN 4840-001:2018

    Aerospace series - Heat shrinkable moulded shapes - Part 001: Technical specification
    9/19/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 4840-001:2018

    Aerospace series - Heat shrinkable moulded shapes - Part 001: Technical specification
    9/19/2018 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 4840-001:2018

    Aerospace series - Heat shrinkable moulded shapes - Part 001: Technical specification
    9/19/2018 - PDF - French - NBN
    Learn More
    €45.00

  • BS EN 4840-001:2018

    Aerospace series. Heat shrinkable moulded shapes Technical specification
    9/5/2018 - PDF - English - BSI
    Learn More
    €130.35

  • DIN EN IEC 62631-3-11 VDE 0307-3-11:2018-09

    Dielectric and resistive properties of solid insulating materials - Part 3-11: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - Method for impregnation and coating materials (IEC 62631-3-11:2018); German version EN IEC 62631-3-11:2018
    9/1/2018 - Paper - German - VDE
    Learn More
    €49.48

  • DIN EN IEC 60674-3-2 VDE 0345-3-2:2018-09

    Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation (IEC 15/840/CDV:2018); German and English version prEN IEC 60674-3-2:2018
    9/1/2018 - Paper - German - VDE
    Learn More
    €22.13

  • DIN EN IEC 62677-3-102 VDE 0343-3-102:2018-09

    Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 102: Heat-shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications (IEC 62677-3-102:2018); German version EN IEC 62677-3-102:2018
    9/1/2018 - Paper - German - VDE
    Learn More
    €49.48

  • NF EN 60811-501/A1, C32-011-501/A1 (09/2018)

    Electric and optical fibre cables - Test methods for non-metallic materials - Part 501 : mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds - Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 501 : Essais mécaniques - Détermination des propriétés mécaniques des mélanges pour les enveloppes isolantes et les gaines - Amendement 1
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €34.30

  • DIN EN IEC 60370 VDE 0304-370:2018-09

    Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods (IEC 60370:2017); German version EN IEC 60370:2018
    9/1/2018 - Paper - German - VDE
    Learn More
    €61.54

  • BS EN IEC 60893-3-6:2004+A2:2018

    Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Specifications individual Requirements silicone
    8/15/2018 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN IEC 61837-2:2018

    Surface mounted piezoelectric devices for frequency control and selection. Standard outlines terminal lead connections Ceramic enclosures
    8/8/2018 - PDF - English - BSI
    Learn More
    €346.02

  • VG 95343-12:2018-08

    Heat shrinkable components - Part 12: Sleevings with inner coating, detail standard; Text in German and English
    8/1/2018 - PDF - English, German - DIN
    Learn More
    €129.80

  • DIN EN IEC 62677-3-101 VDE 0343-3-101:2018-08

    Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications (IEC 62677-3-101:2018); German version EN IEC 62677-3-101:2018
    8/1/2018 - Paper - German - VDE
    Learn More
    €49.48

  • IEEE C57.147:2018

    IEEE Guide for Acceptance and Maintenance of Natural Ester Insulating Liquid in Transformers
    7/19/2018 - PDF - English - IEEE
    Learn More
    €59.22

  • IEEE C57.147:2018

    IEEE Guide for Acceptance and Maintenance of Natural Ester Insulating Liquid in Transformers
    7/19/2018 - Paper - English - IEEE
    Learn More
    €100.58

  • IEEE C57.147:2018 + Redline

    IEEE Guide for Acceptance and Maintenance of Natural Ester Insulating Liquid in Transformers
    7/19/2018 - PDF - English - IEEE
    Learn More
    €80.84

  • 18/30380126 DC:2018

    BS EN 60667-2. Vulcanized fibre for electrical purposes Part 2. Methods of test
    7/2/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30380122 DC:2018

    BS EN 60667-1. Vulcanized fibre for electrical purposes Part 1. Definitions and general requirements
    7/2/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30380130 DC:2018

    BS EN 60667-3-1. Vulcanized fibre for electrical purposes Part 3-1. Specification individual materials. Sheet 1. Flat sheets
    7/2/2018 - PDF - English - BSI
    Learn More
    €23.70

  • DIN EN 60587 VDE 0303-10:2018-07

    Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion (IEC 112/405/CD:2017); Text in German und English
    7/1/2018 - Paper - German - VDE
    Learn More
    €22.72

  • DIN EN 62677-3-103 VDE 0343-3-103:2018-07

    Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications; Text in German and English
    7/1/2018 - Paper - German - VDE
    Learn More
    €16.21

  • DIN EN IEC 60893-3-6 VDE 0318-3-6:2018-07

    Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003 + A1:2009 + A2:2017); German version EN 60893-3-6:2004 + A1:2009 + EN IEC 60893-3-6:2004/A2:2018
    7/1/2018 - Paper - German - VDE
    Learn More
    €53.63

  • DIN IEC/TR 60893-4 VDE 0318-4:2018-07

    Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values (IEC/TR 60893-4:2014 + A1:2017)
    7/1/2018 - Paper - German - VDE
    Learn More
    €49.48

  • BS EN 60811-202:2012+A1:2017

    Electric and optical fibre cables. Test methods for non-metallic materials General tests. Measurement of thickness sheath
    6/29/2018 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN 60811-410:2012+A1:2017

    Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. method copper-catalyzed oxidative degradation of polyolefin insulated conductors
    6/29/2018 - PDF - English - BSI
    Learn More
    €154.05

  • IEC 60811-501:2012+AMD1:2018 Edition 1.1

    IEC 60811-501:2012+AMD1:2018 (Consolidated version) Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
    6/15/2018 - PDF - English, French - IEC
    Learn More
    €152.00

  • IEC 60811-501:2012/AMD1:2018

    IEC 60811-501:2012/AMD1:2018 Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
    6/15/2018 - PDF - English, French - IEC
    Learn More
    €10.00

  • BS EN 60811-511:2012+A1:2017

    Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Measurement of the melt flow index polyethylene polypropylene compounds
    6/5/2018 - PDF - English - BSI
    Learn More
    €154.05

  • 18/30366451 DC:2018

    BS EN 60216-3 Ed.3.0. Electrical insulating materials. Thermal endurance properties Part 3. Instructions for calculating thermal characteristics
    6/4/2018 - PDF - English - BSI
    Learn More
    €23.70

  • UNE-EN IEC 62631-2-1:2018

    Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods (Endorsed by Asociación Española de Normalización in June of 2018.)
    6/1/2018 - PDF - English - AENOR
    Learn More
    €69.00

  • DIN EN IEC 62677-2 VDE 0343-2:2018-06

    Heat shrinkable low and medium voltage moulded shapes - Part 2: Methods of test (IEC 62677-2:2017); German version EN IEC 62677-2:2018
    6/1/2018 - Paper - German - VDE
    Learn More
    €87.98

  • DIN EN 50655-1 VDE 0278-655-1:2018-06

    Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds; German version EN 50655-1:2017
    6/1/2018 - Paper - German - VDE
    Learn More
    €45.89

  • DIN EN 50655-2 VDE 0278-655-2:2018-06

    Electric cables - Accessories - Material characterization - Part 2: Fingerprinting for heat shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV; German version EN 50655-2:2017
    6/1/2018 - Paper - German - VDE
    Learn More
    €49.48

  • DIN EN 50655-3 VDE 0278-655-3:2018-06

    Electric cables - Accessories - Material characterization - Part 3: Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV; German version EN 50655-3:2017
    6/1/2018 - Paper - German - VDE
    Learn More
    €42.45

  • DIN EN IEC 62677-1 VDE 0343-1:2018-06

    Heat shrinkable low and medium voltage moulded shapes - Part 1: General requirements (IEC 62677-1:2017); German version EN IEC 62677-1:2018
    6/1/2018 - Paper - German - VDE
    Learn More
    €45.89

  • ASTM E2769-18

    Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
    6/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM E2769-18 + Redline

    Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
    6/1/2018 - PDF - English - ASTM
    Learn More
    €56.00

  • BS EN 60811-201:2012+A1:2017

    Electric and optical fibre cables. Test methods for non-metallic materials General tests. Measurement of insulation thickness
    5/31/2018 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN 60811-401:2012+A1:2017

    Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
    5/31/2018 - PDF - English - BSI
    Learn More
    €215.67

  • MIL-PRF-907G:2018 & A1:2019

    Antiseize Thread Compound, High Temperature
    5/31/2018 - PDF - English - DODNAV
    Learn More
    €25.00

  • BS IEC 62899-302-2:2018

    Printed electronics Equipment. Inkjet. Imaging-based measurement of droplet volume
    5/18/2018 - PDF - English - BSI
    Learn More
    €154.05

  • BS IEC 62899-303-1:2018

    Printed electronics Equipment. Roll-to-roll printing. Mechanical dimensions
    5/18/2018 - PDF - English - BSI
    Learn More
    €130.35

  • DIN EN 60811-401 VDE 0473-811-401:2018-05

    Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven (IEC 60811-401:2012 + A1:2017); German version EN 60811-401:2012 + A1:2017
    5/1/2018 - Paper - German - VDE
    Learn More
    €69.60

  • DIN EN 60811-509 VDE 0473-811-509:2018-05

    Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test) (IEC 60811-509:2012 + A1:2017); German version EN 60811-509:2012 + A1:2017
    5/1/2018 - Paper - German - VDE
    Learn More
    €49.48

  • DIN EN 60811-508 VDE 0473-811-508:2018-05

    Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths (IEC 60811-508:2012 + A1:2017); German version EN 60811-508:2012 + A1:2017
    5/1/2018 - Paper - German - VDE
    Learn More
    €65.60

  • DIN EN 60811-201 VDE 0473-811-201:2018-05

    Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness (IEC 60811-201:2012 + A1:2017); German version EN 60811-201:2012 + A1:2017
    5/1/2018 - Paper - German - VDE
    Learn More
    €49.48

  • DIN EN 60811-202 VDE 0473-811-202:2018-05

    Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath (IEC 60811-202:2012 + A1:2017); German version EN 60811-202:2012 + A1:2017
    5/1/2018 - Paper - German - VDE
    Learn More
    €53.63

  • ASTM D2304-18

    Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
    5/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D2304-18 + Redline

    Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
    5/1/2018 - PDF - English - ASTM
    Learn More
    €56.00

  • UNE-EN IEC 62631-3-11:2018

    Dielectric and resistive properties of solid insulating materials - Part 3-11: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - Method for impregnation and coating materials (Endorsed by Asociación Española de Normalización in May of 2018.)
    5/1/2018 - PDF - English - AENOR
    Learn More
    €62.00

  • UNE-EN IEC 62677-3-101:2018

    Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications (Endorsed by Asociación Española de Normalización in May of 2018.)
    5/1/2018 - PDF - English - AENOR
    Learn More
    €59.00

  • UNE-EN IEC 62677-3-102:2018

    Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 102: Heat-shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications (Endorsed by Asociación Española de Normalización in May of 2018.)
    5/1/2018 - PDF - English - AENOR
    Learn More
    €59.00

  • DIN EN 60811-410 VDE 0473-811-410:2018-05

    Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors (IEC 60811-410:2012 + A1:2017); German version EN 60811-410:2012 + A1:2017
    5/1/2018 - Paper - German - VDE
    Learn More
    €49.48

  • DIN EN 60811-511 VDE 0473-811-511:2018-05

    Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds (IEC 60811-511:2012 + A1:2017); German version EN 60811-511:2012 + A1:2017
    5/1/2018 - Paper - German - VDE
    Learn More
    €53.63

Items 1 to 200 of 2314 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12