27.075 : Hydrogen technologies
-
UNE-CEN/TS 17977:2023
Gas infrastructure - Quality of gas - Hydrogen used in rededicated gas systems (Endorsed by Asociación Española de Normalización in December of 2023.)
3/29/2024 - PDF - English - AENOR
Learn More€58.00 -
DIN EN ISO 17526:2003-10
Optic and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003); German version EN ISO 17526:2003
10/1/2003 - PDF - German - DIN
Learn More€79.72 -
DIN 3586:2003-10
Thermally activated shutting-off devices for gas - Requirements and testing
10/1/2003 - PDF - German - DIN
Learn More€65.89 -
UNE 26505:2004 (R2012)
Road vehicles. Liquid hydrogen. Land vehicle fuelling system interface.
4/7/2004 - PDF - Spanish - AENOR
Learn More€60.00 -
ASME STP/PT-003-2005
Hydrogen Standardization Interim Report for Tanks, Piping, and Pipelines (STP/PT-003 - 2005)
1/1/2005 - PDF DRM - English - ASME
Learn More€38.00 -
DIN EN 10025-1:2005-02
Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004
2/1/2005 - PDF - German - DIN
Learn More€92.62 -
DIN 3376-1:2005-02
Gas meter connections - Part 1: Two pipes connection; DVGW code of practice
2/1/2005 - PDF - German - DIN
Learn More€59.63 -
DIN 3376-2:2005-02
Gasmeter connections - Part 2: One pipe connection; DVGW code of practice
2/1/2005 - PDF - German - DIN
Learn More€79.72 -
DIN EN 12279:2005-12
Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements; German version EN 12279:2000 + A1:2005
12/1/2005 - PDF - German - DIN
Learn More€72.80 -
BS ISO 16110-1:2007
Hydrogen generators using fuel processing technologies Safety
6/29/2007 - PDF - English - BSI
Learn More€377.00 -
DIN EN 1775:2007-10
Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations; German version EN 1775:2007
10/1/2007 - PDF - German - DIN
Learn More€104.95 -
DIN EN 10253-4:2008-06
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements; German version EN 10253-4:2008
6/1/2008 - PDF - German - DIN
Learn More€184.58 -
DIN EN 10253-4 Berichtigung 1:2009-11
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements, German version EN 10253-4:2008, Corrigendum to DIN EN 10253-4:2008-06, German version EN 10253-4:2008/AC:2009
11/1/2009 - PDF - German - DIN
Learn More€0.00 -
ASTM D7634-10(2017) + Redline
Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
1/1/2010 - PDF - English - ASTM
Learn More€65.00 -
BS ISO 16110-2:2010
Hydrogen generators using fuel processing technologies Test methods for performance
3/31/2010 - PDF - English - BSI
Learn More€331.00 -
€76.00
-
ASTM D7634-10(2017)
Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
12/1/2010 - PDF - English - ASTM
Learn More€54.00 -
DIN EN 10025-1:2011-04
Hot rolled products of structural steels - Part 1: General technical delivery conditions, German version prEN 10025-1:2011
4/1/2011 - PDF - German - DIN
Learn More€99.35 -
DIN 3537-1:2011-09
Gas stop valves for domestic gas installations up to 5 bar - Requirements and tests
9/1/2011 - PDF - German - DIN
Learn More€99.35 -
DIN EN 126:2012-06
Multifunctional controls for gas burning appliances, German version EN 126:2012
6/1/2012 - PDF - German - DIN
Learn More€79.72 -
DIN 3434:2012-06
Gas valves for gas installations - Straight pattern conicel plug valves with screw connection - Nozzles with conical connection
6/1/2012 - PDF - German - DIN
Learn More€32.34 -
DIN 3435:2012-06
Gas valves for gas installations - Angle pattern ball valves with screw connection - Nozzles with conical connection
6/1/2012 - PDF - German - DIN
Learn More€32.34 -
DIN 3436:2012-06
Gas valves for gas installations - Nozzles with conical sealing and gasket
6/1/2012 - PDF - German - DIN
Learn More€32.34 -
DIN EN 12007-1:2012-10
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements, German version EN 12007-1:2012
10/1/2012 - PDF - German - DIN
Learn More€92.62 -
DIN EN 12007-2:2012-10
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar), German version EN 12007-2:2012
10/1/2012 - PDF - German - DIN
Learn More€85.79 -
DIN EN 12007-4:2012-10
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional requirements for renovation, German version EN 12007-4:2012
10/1/2012 - PDF - German - DIN
Learn More€99.35 -
DIN EN 12405-2:2012-10
Gas meters - Conversion devices - Part 2: Energy conversion, German version EN 12405-2:2012
10/1/2012 - PDF - German - DIN
Learn More€148.04 -
DIN EN 16314:2013-09
Gas meters - Additional functionalities, German version EN 16314:2013
9/1/2013 - PDF - German - DIN
Learn More€136.82 -
DIN EN 1594:2013-12
Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements, German version EN 1594:2013
12/1/2013 - PDF - German - DIN
Learn More€179.72 -
€99.33
-
DIN EN 10269:2014-02
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties, German version EN 10269:2013
2/1/2014 - PDF - German - DIN
Learn More€120.84 -
DIN EN 10216-1:2014-03
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties, German version EN 10216-1:2013
3/1/2014 - PDF - German - DIN
Learn More€92.62 -
DIN EN 10216-4:2014-03
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties, German version EN 10216-4:2013
3/1/2014 - PDF - German - DIN
Learn More€92.62 -
DIN EN 10216-3:2014-03
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes, German version EN 10216-3:2013
3/1/2014 - PDF - German - DIN
Learn More€104.95 -
DIN EN 12583:2014-07
Gas infrastructure - Compressor stations - Functional requirements, German version EN 12583:2014
7/1/2014 - PDF - German - DIN
Learn More€126.26 -
DIN EN 12007-5:2014-07
Gas infrastructure - Pipelines for maximium operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements, German version EN 12007-5:2014
7/1/2014 - PDF - German - DIN
Learn More€85.79 -
FD E29-753 (07/2014)
Gas cylinders - Hydrogen compatibility testing for metals
7/1/2014 - Paper - French - AFNOR
Learn More€86.67 -
DIN EN 16340:2014-10
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Combustion product sensing devices, German version EN 16340:2014
10/1/2014 - PDF - German - DIN
Learn More€126.26 -
DIN EN 15502-2-2:2014-10
Gas-fired central heating boilers - Part 2-2: Specific standard for type B1 appliances, German version EN 15502-2-2:2014.
10/1/2014 - PDF - German - DIN
Learn More€115.33 -
DIN EN 10088-2:2014-12
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes, German version EN 10088-2:2014
12/1/2014 - PDF - German - DIN
Learn More€120.84 -
DIN EN 12186:2014-12
Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements, German version EN 12186:2014
12/1/2014 - PDF - German - DIN
Learn More€110.00 -
UNE-ISO 16110-1:2015 (R2021)
Hydrogen generators using fuel processing technologies -- Part 1: Safety
1/28/2015 - PDF - Spanish - AENOR
Learn More€126.00 -
DIN EN 14597:2015-02
Temperature control devices and temperature limiters for heat generating systems, German version EN 14597:2012
2/1/2015 - PDF - German - DIN
Learn More€104.95 -
DIN EN 12007-3:2015-07
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific funtional requirements for steel, German version EN 12007-3:2015
7/1/2015 - PDF - German - DIN
Learn More€85.79 -
DIN EN 12405-3:2016-04
Gas meters - Conversion devices - Part 3: Flow computer, German version EN 12405-3:2015.
4/1/2016 - PDF - German - DIN
Learn More€169.25 -
DIN EN 331:2016-04
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings, German version EN 331:2015
4/1/2016 - PDF - German - DIN
Learn More€120.84 -
DIN EN 1776:2016-05
Gas infrastructure - Gas measuring systems - Functional requirements, German version EN 1776:2015.
5/1/2016 - PDF - German - DIN
Learn More€184.58 -
DIN EN 10272:2016-10
Stainless steel bars for pressure purposes, German version EN 10272:2016.
10/1/2016 - PDF - German - DIN
Learn More€110.00 -
DIN EN 10028-7:2016-10
Flat products made of steels for pressure purposes - Part 7: Stainless steels, German version EN 10028-7:2016.
10/1/2016 - PDF - German - DIN
Learn More€126.26 -
DIN EN 1918-1:2016-11
Gas infrastructure - Underground gas storage - Part 1: Functional recommendations for storage in aquifers, German version EN 1918-1:2016.
11/1/2016 - PDF - German - DIN
Learn More€110.00 -
DIN EN 1918-2:2016-11
Gas infrastructure - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields, German version EN 1918-2:2016.
11/1/2016 - PDF - German - DIN
Learn More€99.35 -
DIN EN 1918-3:2016-11
Gas infrastructure - Underground gas storage - Part 3: Functional recommendations for storage in solution-mined salt caverns, German version EN 1918-3:2016.
11/1/2016 - PDF - German - DIN
Learn More€110.00 -
DIN EN 1918-4:2016-11
Gas infrastructure - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns, German version EN 1918-4:2016.
11/1/2016 - PDF - German - DIN
Learn More€104.95 -
DIN EN 1918-5:2016-11
Gas infrastructure - Underground gas storage - Part 5: Functional recommendations for surface facilities, German version EN 1918-5:2016.
11/1/2016 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 80079-36:2016-12
Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016), German version EN ISO 80079-36:2016.
12/1/2016 - PDF - German - DIN
Learn More€184.58 -
DIN EN ISO 80079-37:2016-12
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety "c", control of ignition sources "b", liquid immersion "k" (ISO 80079-37:2016), German version EN ISO 80079-37:2016.
12/1/2016 - PDF - German - DIN
Learn More€136.82 -
DIN EN ISO 17268:2017-03
Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2012), German version EN ISO 17268:2016
3/1/2017 - PDF - German - DIN
Learn More€115.33 -
DIN EN 10222-1:2017-06
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings, German version EN 10222-1:2017
6/1/2017 - PDF - German - DIN
Learn More€85.79 -
DIN EN 10222-3:2017-06
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties, German version EN 10222-3:2017
6/1/2017 - PDF - German - DIN
Learn More€65.89 -
DIN EN 10222-5:2017-06
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels, German version EN 10222-5:2017
6/1/2017 - PDF - German - DIN
Learn More€85.79 -
NF EN ISO 11114-4, E29-648-4 (06/2017)
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4 : Test methods for selecting steels resistant to hydrogen embrittlement - Bouteilles à gaz transportables - Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux - Partie 4 : Méthodes d'essai pour le choix de matériaux métalliques résistants à la fragilisation par l'hydrogène
6/1/2017 - Paper - French - AFNOR
Learn More€73.23 -
DIN EN 10028-1:2017-10
Flat products made of steels for pressure purposes - Part 1: General requirements, German version EN 10028-1:2017
10/1/2017 - PDF - German - DIN
Learn More€79.72 -
DIN EN 10028-2:2017-10
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties, German version EN 10028-2:2017
10/1/2017 - PDF - German - DIN
Learn More€85.79 -
DIN EN 10028-3:2017-10
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized, German version EN 10028-3:2017
10/1/2017 - PDF - German - DIN
Learn More€72.80 -
DIN EN 10028-4:2017-10
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties, German version EN 10028-4:2017
10/1/2017 - PDF - German - DIN
Learn More€59.63 -
DIN EN 10028-5:2017-10
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled, German version EN 10028-5:2017
10/1/2017 - PDF - German - DIN
Learn More€65.89 -
DIN EN 10028-6:2017-10
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered, German version EN 10028-6:2017
10/1/2017 - PDF - German - DIN
Learn More€65.89 -
DIN EN 10253-4:2017-11
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements, German and English version prEN 10253-4:2017
11/1/2017 - PDF - English, German - DIN
Learn More€234.02 -
DIN EN 1359:2017-11
Gas meters - Diaphragm gas meters, German version EN 1359:2017.
11/1/2017 - PDF - German - DIN
Learn More€158.04 -
ASTM D7606-17
Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases
11/1/2017 - PDF - English - ASTM
Learn More€51.00 -
ASTM D7606-17 + Redline
Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases
11/1/2017 - PDF - English - ASTM
Learn More€61.00 -
ASTM D7651-17
Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
11/1/2017 - PDF - English - ASTM
Learn More€48.00 -
ASTM D7651-17 + Redline
Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
11/1/2017 - PDF - English - ASTM
Learn More€57.00 -
DIN EN 13480-2:2017-12
Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017
12/1/2017 - PDF - German - DIN
Learn More€163.74 -
DIN EN 13480-5:2017-12
Metallic industrial piping - Part 5: Inspection and testing, German version EN 13480-5:2017
12/1/2017 - PDF - German - DIN
Learn More€104.95 -
DIN EN 13480-6:2017-12
Metallic industrial piping - Part 6: Additional requirements for buried piping, German version EN 13480-6:2017.
12/1/2017 - PDF - German - DIN
Learn More€104.95 -
DIN EN 13480-8:2017-12
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping, German version EN 13480-8:2017
12/1/2017 - PDF - German - DIN
Learn More€120.84 -
DIN EN 13480-3:2017-12
Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017
12/1/2017 - PDF - German - DIN
Learn More€399.44 -
DIN EN 13480-4:2017-12
Metallic industrial piping - Part 4: Fabrication and installation, German version EN 13480-4:2017
12/1/2017 - PDF - German - DIN
Learn More€120.84 -
DIN EN 13480-1:2017-12
Metallic industrial piping - Part 1: General, German version EN 13480-1:2017
12/1/2017 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 19884:2018-04
Gaseous hydrogen - Cylinders and tubes for stationary storage (ISO/DIS 19884:2018), German and English version prEN ISO 19884:2018
4/1/2018 - PDF - English, German - DIN
Learn More€163.74 -
DIN EN 12480:2018-05
Gas meters - Rotary displacement gas meters, German version EN 12480:2018.
5/1/2018 - PDF - German - DIN
Learn More€152.71 -
DIN EN 13480-9:2018-10
Metallic industrial piping - Part 9: Additional requirements for nickel and nickel alloys piping, German and English version prEN 13480-9:2018
10/1/2018 - PDF - English, German - DIN
Learn More€79.72 -
€151.00
-
DIN EN 13480-4/A1:2018-11
Metallic industrial piping - Part 4: Fabrication and installation, German and English version EN 13480-4:2017/prA1:2018
11/1/2018 - PDF - English, German - DIN
Learn More€39.35 -
ISO 19882:2018
Gaseous hydrogen
Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers
11/28/2018 - Paper - English - ISO
Learn More€174.00 -
BS ISO 19882:2018
Gaseous hydrogen. Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers
11/30/2018 - PDF - English - BSI
Learn More€293.00 -
DIN EN 13480-2/A1:2018-12
Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A1:2018
12/1/2018 - PDF - German - DIN
Learn More€52.90 -
DIN EN 13480-2/A2:2018-12
Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A2:2018
12/1/2018 - PDF - German - DIN
Learn More€39.35 -
DIN EN 13480-2/A3:2018-12
Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A3:2018
12/1/2018 - PDF - German - DIN
Learn More€32.34 -
DIN EN 14236:2018-12
Ultrasonic domestic gas meters, German version EN 14236:2018.
12/1/2018 - PDF - German - DIN
Learn More€169.25 -
DIN EN 13480-5/A1:2019-06
Metallic industrial piping - Part 5: Inspection and testing, German version EN 13480-5:2017/A1:2019
6/1/2019 - PDF - German - DIN
Learn More€39.35 -
DIN EN IEC 61850-7-420:2019-06
Communication networks and systems for power utility automation - Part 7-420: Basic communication structure - Distributed energy resources and distribution automation logical nodes (IEC 57/1997/CD:2018), Text in English
6/1/2019 - PDF - English, German - DIN
Learn More€460.75 -
DIN EN 13480-1/A1:2019-07
Metallic industrial piping - Part 1: General, German version EN 13480-1:2017/A1:2019
7/1/2019 - PDF - German - DIN
Learn More€32.34 -
DIN EN 13480-6/A1:2019-07
Metallic industrial piping - Part 6: Additional requirements for buried piping, German version EN 13480-6:2017/A1:2019
7/1/2019 - PDF - German - DIN
Learn More€39.35 -
DIN EN 10217-1:2019-08
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties, German version EN 10217-1:2019
8/1/2019 - PDF - German - DIN
Learn More€120.84 -
DIN EN 10217-2:2019-08
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties, German version EN 10217-2:2019
8/1/2019 - PDF - German - DIN
Learn More€104.95 -
DIN EN 10217-3:2019-08
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties, German version EN 10217-3:2019
8/1/2019 - PDF - German - DIN
Learn More€126.26 -
DIN EN 10217-4:2019-08
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties, German version EN 10217-4:2019
8/1/2019 - PDF - German - DIN
Learn More€99.35 -
DIN EN 10217-5:2019-08
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties, German version EN 10217-5:2019
8/1/2019 - PDF - German - DIN
Learn More€115.33 -
DIN EN 10217-6:2019-08
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties, German version EN 10217-6:2019
8/1/2019 - PDF - German - DIN
Learn More€115.33 -
NF ISO 21087, X20-107 (09/2019)
Gas analysis - Analytical methods for hydrogen fuel - Proton exchange membrane (PEM) fuel cell applications for road vehicles - Combustible à base dhydrogène - Méthodes analytiques - Applications utilisant des piles à combustible à membrane échangeuse de protons (PEM) pour véhicules routiers
9/1/2019 - Paper - French - AFNOR
Learn More€75.50 -
DIN EN 17127:2019-09
Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols, German version EN 17127:2018
9/1/2019 - PDF - German - DIN
Learn More€79.72 -
DIN EN 10025-3:2019-10
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels, German version EN 10025-3:2019
10/1/2019 - PDF - German - DIN
Learn More€92.62 -
DIN EN 334:2019-11
Gas pressure regulators for inlet pressures up to 10 MPa (100 bar), German and English version EN 334:2019.
11/1/2019 - PDF - English, German - DIN
Learn More€322.52 -
DIN EN 14382:2019-11
Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar), German and English version EN 14382:2019.
11/1/2019 - PDF - English, German - DIN
Learn More€184.58 -
DIN EN 16726:2019-11
Gas infrastructure - Quality of gas - Group H, German version EN 16726:2015+A1:2018.
11/1/2019 - PDF - German - DIN
Learn More€126.26 -
€87.00
-
DIN EN 10216-2:2020-04
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties, German version EN 10216-2:2013+A1:2019
4/1/2020 - PDF - German - DIN
Learn More€115.33 -
DIN EN ISO 17268:2020-05
Gaseous hydrogen land vehicle refuelling connection devices (ISO/FDIS 17268:2019), German and English version FprEN ISO 17268:2019
5/1/2020 - PDF - English, German - DIN
Learn More€131.96 -
DIN EN 13480-2/A7:2020-06
Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A7:2020
6/1/2020 - PDF - German - DIN
Learn More€32.34 -
DIN EN 13480-4/A2:2020-06
Metallic industrial piping - Part 4: Fabrication and installation, German and English version EN 13480-4:2017/prA2:2020
6/1/2020 - PDF - English, German - DIN
Learn More€39.35 -
€0.00
-
DIN EN 12261:2020-09
Gas meters - Turbine gas meters, German version EN 12261:2018.
9/1/2020 - PDF - German - DIN
Learn More€136.82 -
DIN EN 17339:2020-09
Transportable gas cylinders - Fully wrapped carbon composite cylinders and tubes for hydrogen, German version EN 17339:2020
9/1/2020 - PDF - German - DIN
Learn More€126.26 -
NF EN 17127, M58-005 (11/2020)
Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols
11/1/2020 - Paper - French - AFNOR
Learn More€75.67 -
DIN CEN/TR 15339-6:2020-11
Thermal spraying - Safety requirements for thermal spraying equipment - Part 6: Spray booth, Handling system, Dust collection, Exhaust system, Filter, German version CEN/TR 15339-6:2014
11/1/2020 - PDF - German - DIN
Learn More€63.64 -
DIN CEN/TR 15339-1:2020-11
Thermal spraying - Safety requirements for thermal spraying equipment - Part 1: General requirements, German version CEN/TR 15339-1:2014
11/1/2020 - PDF - German - DIN
Learn More€47.66 -
DIN CEN/TR 15339-3:2020-11
Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units, German version CEN/TR 15339-3:2014
11/1/2020 - PDF - German - DIN
Learn More€47.66 -
DIN CEN/TR 15339-4:2020-11
Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply, German version CEN/TR 15339-4:2014
11/1/2020 - PDF - German - DIN
Learn More€63.64 -
DIN CEN/TR 15339-5:2020-11
Thermal spraying - Safety requirements for thermal spraying equipment - Part 5: Powder and wire feed units, German version CEN/TR 15339-5:2014
11/1/2020 - PDF - German - DIN
Learn More€36.82 -
DIN EN 13480-3/A2:2020-12
Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A2:2020
12/1/2020 - PDF - German - DIN
Learn More€92.62 -
DIN EN 13480-3/A3:2020-12
Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A3:2020
12/1/2020 - PDF - German - DIN
Learn More€99.35 -
DIN 3389-2:2021-02
Ready-made insulated joint - Part 2: Insulating couplings for gas distribution and transportation - Requirements and tests.
2/1/2021 - PDF - German - DIN
Learn More€79.72 -
DIN 3389-3:2021-02
Ready-made insulated joint - Part 3: Conformity assessment.
2/1/2021 - PDF - German - DIN
Learn More€59.63 -
DIN 3389-1:2021-02
Ready-made insulated joint - Part 1: Insulating couplings for service lines and gas installations - Requirements and tests.
2/1/2021 - PDF - German - DIN
Learn More€65.89 -
DIN EN 17343:2021-03
Railway applications - General terms and definitions, Trilingual version EN 17343:2020
3/1/2021 - PDF - English, French, German - DIN
Learn More€141.96 -
DIN EN 12583:2021-03
Gas Infrastructure - Compressor stations - Functional requirements, German and English version prEN 12583:2021
3/1/2021 - PDF - English, German - DIN
Learn More€152.71 -
DIN EN 13480-3/A1:2021-05
Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A1:2021
5/1/2021 - PDF - German - DIN
Learn More€72.80 -
DIN CEN/TS 12007-6:2021-06
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 6: Specific functional recommendations for unplasticized polyamide (PA-U), German version CEN/TS 12007-6:2021.
6/1/2021 - PDF - German - DIN
Learn More€79.63 -
DIN EN 10216-5:2021-06
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes, German version EN 10216-5:2021
6/1/2021 - PDF - German - DIN
Learn More€115.33 -
DIN EN 10217-7:2021-06
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes, German version EN 10217-7:2021
6/1/2021 - PDF - German - DIN
Learn More€110.00 -
DIN EN 1254-3:2021-07
Copper and copper alloys - Plumbing fittings - Part 3: Compression fittings for use with plastics and multilayer pipes, German version EN 1254-3:2021
7/1/2021 - PDF - German - DIN
Learn More€104.95 -
DIN EN 437:2021-07
Test gases - Test pressures - Appliance categories, German version EN 437:2021.
7/1/2021 - PDF - German - DIN
Learn More€136.82 -
DIN 3590-1:2021-07
Gas isolation valves and overpressure protection devices for pressure measuring devices - Part 1: Requirements and tests.
7/1/2021 - PDF - German - DIN
Learn More€79.72 -
DIN 3590-2:2021-07
Gas isolation valves and overpressure protection devices for pressure measuring devices - Part 2: Conformity assessment.
7/1/2021 - PDF - German - DIN
Learn More€52.90 -
DIN EN 16942:2021-08
Fuels - Identification of vehicle compatibility - Graphical expression for consumer information, German version EN 16942:2016+A1:2021
8/1/2021 - PDF - German - DIN
Learn More€79.72 -
DIN EN 15339-2:2021-09
Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units, German version EN 15339-2:2021
9/1/2021 - PDF - German - DIN
Learn More€72.80 -
DIN EN 1254-2:2021-10
Copper and copper alloys - Plumbing fittings - Part 2: Compression fittings for use with copper tubes, German version EN 1254-2:2021
10/1/2021 - PDF - German - DIN
Learn More€92.62 -
DIN EN 1254-1:2021-10
Copper and copper alloys - Plumbing fittings - Part 1: Capillary fittings for soldering or brazing to copper tubes, German version EN 1254-1:2021
10/1/2021 - PDF - German - DIN
Learn More€92.62 -
DIN EN 1254-6:2021-10
Copper and copper alloys - Plumbing fittings - Part 6: Push-fit fittings for use with metallic tubes, plastics and multilayer pipes, German version EN 1254-6:2021
10/1/2021 - PDF - German - DIN
Learn More€99.35 -
DIN EN 1254-8:2021-10
Copper and copper alloys - Plumbing fittings - Part 8: Press fittings for use with plastics and multilayer pipes, German version EN 1254-8:2021
10/1/2021 - PDF - German - DIN
Learn More€99.35 -
DIN EN 1254-7:2021-10
Copper and copper alloys - Plumbing fittings - Part 7: Press fittings for use with metallic tubes, German version EN 1254-7:2021
10/1/2021 - PDF - German - DIN
Learn More€99.35 -
DIN EN 1254-4:2021-10
Copper and copper alloys - Plumbing fittings - Part 4: Threaded fittings, German version EN 1254-4:2021
10/1/2021 - PDF - German - DIN
Learn More€79.72 -
DIN EN 1254-5:2021-10
Copper and copper alloys - Plumbing fittings - Part 5: Capillary fittings with short ends for brazing to copper tubes, German version EN 1254-5:2021
10/1/2021 - PDF - German - DIN
Learn More€92.62 -
DIN EN 1254-20:2021-10
Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information, German version EN 1254-20:2021
10/1/2021 - PDF - German - DIN
Learn More€141.96 -
DIN EN 12261:2021-10
Gas meters - Turbine gas meters, German and English version prEN 12261:2021
10/1/2021 - PDF - English, German - DIN
Learn More€141.96 -
DIN EN 13611/A1:2021-10
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements, German and English version EN 13611:2019/prA1:2021
10/1/2021 - PDF - English, German - DIN
Learn More€110.00 -
DIN EN 10253-2:2021-11
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements, German version EN 10253-2:2021
11/1/2021 - PDF - German - DIN
Learn More€216.26 -
DIN EN 13480-3/A4:2021-11
Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A4:2021
11/1/2021 - PDF - German - DIN
Learn More€45.98 -
DIN 3588-2:2021-11
Gas Tapping Tees - Part 2: With and without shut-off function for pipes made of cast iron and steel - Requirements and tests.
11/1/2021 - PDF - German - DIN
Learn More€72.80 -
€72.80
-
DIN 3588-1:2021-11
Gas Tapping Tees - Part 1: Tapping valves for polyethylene gas pipe systems - Requirements and tests.
11/1/2021 - PDF - German - DIN
Learn More€79.72 -
ASTM D7650-21
Standard Practice for Sampling of Particulate Matter in High Pressure Gaseous Fuels with an In-Stream Filter
12/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM D7650-21 + Redline
Standard Practice for Sampling of Particulate Matter in High Pressure Gaseous Fuels with an In-Stream Filter
12/1/2021 - PDF - English - ASTM
Learn More€61.00 -
DIN EN 13480-2/A8:2021-12
Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A8:2021
12/1/2021 - PDF - German - DIN
Learn More€45.98 -
DIN EN 13480-5/A2:2021-12
Metallic industrial piping - Part 5: Inspection and testing, German version EN 13480-5:2017/A2:2021
12/1/2021 - PDF - German - DIN
Learn More€39.35 -
DVGW G 221:2021-12
Leitfaden zur Anwendung des DVGW-Regelwerks auf die leitungsgebundene Versorgung der Allgemeinheit mit wasserstoffhaltigen Gasen und Wasserstoff
12/1/2021 - PDF - German - DVGW
Learn More€151.00 -
DIN EN 12732:2022-01
Gas infrastructure - Welding steel pipework - Functional requirements, German version EN 12732:2021.
1/1/2022 - PDF - German - DIN
Learn More€163.74 -
DIN EN 10088-2:2022-01
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes, German and English version prEN 10088-2:2021
1/1/2022 - PDF - English, German - DIN
Learn More€141.96 -
DIN EN 13611:2022-01
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements, German version EN 13611:2019 + AC:2021
1/1/2022 - PDF - German - DIN
Learn More€246.73 -
DIN EN 12405-1:2022-02
Gas meters - Conversion devices - Part 1: Volume conversion, German version EN 12405-1:2021.
2/1/2022 - PDF - German - DIN
Learn More€201.96 -
DIN EN 15502-1:2022-02
Gas-fired heating boilers - Part 1: General requirements and tests, German version EN 15502-1:2021.
2/1/2022 - PDF - German - DIN
Learn More€343.18 -
DIN EN 15609:2022-02
LPG equipment and accessories - LPG propulsion systems for boats, yachts and other watercraft - Installation requirements, German version EN 15609:2021
2/1/2022 - PDF - German - DIN
Learn More€126.26 -
€93.00
-
NF EN 17124, M58-006 (03/2022)
Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for road vehicles
3/1/2022 - Paper - French - AFNOR
Learn More€99.33 -
DIN ISO 21087:2022-03
Gas analysis - Analytical methods for hydrogen fuel - Proton exchange membrane (PEM) fuel cell applications for road vehicles (ISO 21087:2019)
3/1/2022 - PDF - German - DIN
Learn More€79.72 -
NBN EN 17124:2022
Hydrogen fuel - Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen - Proton exchange membrane (PEM) fuel cell applications for vehicles
3/19/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN 17124:2022
Hydrogen fuel - Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen - Proton exchange membrane (PEM) fuel cell applications for vehicles
3/19/2022 - PDF - English - NBN
Learn More€142.00 -
NBN EN 17124:2022
Wasserstoff als Kraftstoff - Produktfestlegung und Qualitätssicherung für Wasserstoffbetankungsanlagen zur Abgabe gasförmigen Wasserstoffs - Protonenaustauschmembran (PEM)-Brennstoffzellenanwendungen für Fahrzeuge
3/19/2022 - PDF - German - NBN
Learn More€142.00 -
DIN EN 17343:2022-04
Railway applications - General terms and definitions, Trilingual version prEN 17343:2022
4/1/2022 - PDF - English, French, German - DIN
Learn More€148.04 -
BS EN 17124:2022
Hydrogen fuel. Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen. Proton exchange membrane (PEM) fuel cell applications for vehicles
5/24/2022 - PDF - English - BSI
Learn More€293.00 -
BS EN 17124:2022 + Redline
Tracked Changes. Hydrogen fuel. Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen. Proton exchange membrane (PEM) fuel cell applications for vehicles
5/31/2022 - PDF - English - BSI
Learn More€382.00 -
ASTM D7675-22
Standard Test Method for Determination of Total Hydrocarbons in Hydrogen by FID-Based Total Hydrocarbon (THC) Analyzer
6/1/2022 - PDF - English - ASTM
Learn More€51.00 -
ASTM D7675-22 + Redline
Standard Test Method for Determination of Total Hydrocarbons in Hydrogen by FID-Based Total Hydrocarbon (THC) Analyzer
6/1/2022 - PDF - English - ASTM
Learn More€61.00 -
ASTM D7892-22
Standard Test Method for Determination of Total Organic Halides, Total Non-Methane Hydrocarbons, and Formaldehyde in Hydrogen Fuel by Gas Chromatography/Mass Spectrometry
6/1/2022 - PDF - English - ASTM
Learn More€51.00 -
ASTM D7892-22 + Redline
Standard Test Method for Determination of Total Organic Halides, Total Non-Methane Hydrocarbons, and Formaldehyde in Hydrogen Fuel by Gas Chromatography/Mass Spectrometry
6/1/2022 - PDF - English - ASTM
Learn More€61.00 -
DIN EN 1949:2022-06
Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles, German version EN 1949:2021.
6/1/2022 - PDF - German - DIN
Learn More€131.96 -
UNE-EN 17127:2022
Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols
6/15/2022 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 17127:2022
Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols
6/15/2022 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 17124:2022
Hydrogen fuel - Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen - Proton exchange membrane (PEM) fuel cell applications for vehicles
6/22/2022 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 17124:2022
Hydrogen fuel - Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen - Proton exchange membrane (PEM) fuel cell applications for vehicles
6/22/2022 - PDF - English - AENOR
Learn More€88.80 -
DIN EN 10250-1:2022-07
Open die steel forgings for general engineering purposes - Part 1: General requirements, German version EN 10250-1:2022
7/1/2022 - PDF - German - DIN
Learn More€72.80 -
DIN EN 10250-4:2022-08
Open die steel forgings for general engineering purposes - Part 4: Stainless steels, German version EN 10250-4:2021
8/1/2022 - PDF - German - DIN
Learn More€79.72 -
UNE-ISO 19880-1:2022
Gaseous hydrogen — Fuelling stations — Part 1: General requirements
10/19/2022 - PDF - Spanish - AENOR
Learn More€183.00 -
DIN EN 1594:2022-11
Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements, German and English version prEN 1594:2022
11/1/2022 - PDF - English, German - DIN
Learn More€152.71 -
DIN EN 15502-2-1:2022-11
Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1000 kW, German version EN 15502-2-1:2022
11/1/2022 - PDF - German - DIN
Learn More€184.58 -
DIN EN 17124:2022-12
Hydrogen fuel - Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen - Proton exchange membrane (PEM) fuel cell applications for vehicles, German version EN 17124:2022.
12/1/2022 - PDF - German - DIN
Learn More€110.00 -
DIN EN 15502-2-2:2023-01
Gas-fired central heating boilers - Part 2-2: Specific standard for type B1 appliances, German and English version prEN 15502-2-2:2022
1/1/2023 - PDF - English, German - DIN
Learn More€136.82 -
ASTM D7941/D7941M-23
Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
1/15/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM D7941/D7941M-23 + Redline
Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
1/15/2023 - PDF - English - ASTM
Learn More€65.00 -
DIN EN 10217-1/A1:2023-02
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties, German and English version EN 10217-1:2019/prA1:2023
2/1/2023 - PDF - English, German - DIN
Learn More€39.35 -
DIN EN 14382/A1:2023-02
Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar), German and English version EN 14382:2019/prA1:2022
2/1/2023 - PDF - English, German - DIN
Learn More€32.34 -
DIN 3376-1:2023-02
Gas meter connections - Part 1: Two pipes connection, DVGW code of practice
2/1/2023 - PDF - German - DIN
Learn More€72.80 -
DIN 3376-2:2023-02
Gasmeter connections - Part 2: One pipe connection, DVGW code of practice
2/1/2023 - PDF - German - DIN
Learn More€92.62 -
DIN EN ISO 15112:2023-03
Natural gas - Energy determination (ISO 15112:2018), German version EN ISO 15112:2018.
3/1/2023 - PDF - German - DIN
Learn More€169.25 -
DIN EN 676:2023-03
Forced draught burners for gaseous fuels, German version EN 676:2020 + AC:2022
3/1/2023 - PDF - German - DIN
Learn More€234.02 -
23/30467370 DC:2023
BS EN 17127. Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols
3/23/2023 - PDF - English - BSI
Learn More€24.00 -
DIN EN 15001-2:2023-04
Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance, German version EN 15001-2:2023.
4/1/2023 - PDF - German - DIN
Learn More€92.62 -
DIN EN 15001-1:2023-04
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing, German version EN 15001-1:2023.
4/1/2023 - PDF - German - DIN
Learn More€216.26