25.220 : Surface treatment and coating
-
PR NF T35-080, T35-080PR (02/2024)
Cabine pour l'application de revêtement par projection thermique - Prescriptions de sécurité
2/1/2024 - Paper - French -
Learn More€74.00 -
NF EN ISO 3882, A91-109 (01/2024)
Revêtements métalliques et autres revêtements inorganiques - Revue des méthodes de mesurage de l'épaisseur
1/1/2024 - Paper - French -
Learn More€60.50 -
PR NF EN ISO 28721-2, A91-320-2PR (12/2023)
Émaux vitrifiés - Appareils émaillés pour les installations industrielles - Partie 2 : désignation et spécifications de la résistance à l'attaque chimique et au choc thermique
12/1/2023 - Paper - English, French -
Learn More€56.00 -
NF EN ISO 26443, B44-001 (11/2023)
Céramiques techniques - Évaluation de l'adhérence des revêtements céramiques par l'essai de pénétration Rockwell
11/1/2023 - Paper - French -
Learn More€48.00 -
NF EN ISO 14919, A91-219 (11/2023)
Projection thermique - Fils, baguettes et cordons pour projection thermique à l'arc et au pistolet dans une flamme - Classification et conditions techniques d'approvisionnement
11/1/2023 - Paper - French -
Learn More€75.50 -
NF EN ISO 12736-1, A49-722-1 (10/2023)
Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone - Systèmes d'isolation thermique en milieu humide pour conduites et équipements sous-marins - Partie 1 : validation des matériaux et des systèmes d'isolation
10/1/2023 - Paper - French -
Learn More€131.00 -
NF EN ISO 12736-2, A49-722-2 (10/2023)
Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone - Systèmes d'isolation thermique en milieu humide pour conduites et équipements sous-marins - Partie 2 : processus de qualification des modes opératoires de production et d'application
10/1/2023 - Paper - French -
Learn More€144.50 -
NF ISO 26910-1, E25-910-1 (10/2023)
Ressorts - Grenaillage de précontrainte - Partie 1 : modes opératoires généraux
10/1/2023 - Paper - French -
Learn More€75.67 -
NF EN ISO 12736-3, A49-722-3 (10/2023)
Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone - Systèmes d'isolation thermique en milieu humide pour conduites et équipements sous-marins - Partie 3 : interfaces entre systèmes, systèmes de joints soudés sur site, réparations sur site et isolation préfabriquée
10/1/2023 - Paper - French -
Learn More€144.67 -
NF EN 13523-23, T37-001-23 (10/2023)
Tôles prélaquées - Méthodes d'essai - Partie 23 : résistance à des atmosphères humides contenant du dioxyde de soufre
10/1/2023 - Paper - French -
Learn More€34.67 -
PR NF EN 13523-12, T37-001-12PR (09/2023)
Tôles prélaquées - Méthodes d'essai - Partie 12 : résistance à la rayure
9/1/2023 - Paper - English, French -
Learn More€64.50 -
PR NF EN 13523-8, T37-001-8PR (09/2023)
Tôles prélaquées - Méthodes d'essai - Partie 8 : résistance au brouillard salin
9/1/2023 - Paper - English, French -
Learn More€64.50 -
PR NF EN 13523-1, T37-001-1PR (09/2023)
Tôles prélaquées - Méthodes d'essai - Partie 1 : Épaisseur du feuil
9/1/2023 - Paper - English, French -
Learn More€64.50 -
PR NF EN 13523-29, T37-001-29PR (09/2023)
Tôles prélaquées - Méthodes d'essai - Partie 29 : résistance à la pollution environnementale (salissures)
9/1/2023 - Paper - English, French -
Learn More€56.00 -
NF EN ISO 14920, A91-214 (09/2023)
Projection thermique - Projection et fusion d'alliages autofondants
9/1/2023 - Paper - French -
Learn More€60.67 -
PR NF EN 13523-21, T37-001-21PR (09/2023)
Tôles prélaquées - Méthodes d'essai - Partie 21 : évaluation des panneaux exposés en extérieur
9/1/2023 - Paper - English, French -
Learn More€74.00 -
€75.67
-
PR NF EN 13523-10, T37-001-10PR (09/2023)
Tôles prélaquées - Méthodes d'essai - Partie 10 : résistance à un rayonnement UV fluorescent et à la condensation de l'eau
9/1/2023 - Paper - English, French -
Learn More€56.00 -
PR NF EN 13523-3, T37-001-3PR (09/2023)
Tôles prélaquées - Méthodes d'essai - Partie 3 : différence de couleur et métamérisme - Comparaison au moyen d'instruments
9/1/2023 - Paper - English, French -
Learn More€64.50 -
PR NF EN 13523-22, T37-001-22PR (09/2023)
Tôles prélaquées - Méthodes d'essai - Partie 22 : différence de couleur - Comparaison visuelle
9/1/2023 - Paper - English, French -
Learn More€56.00 -
PR NF EN ISO 9717, A91-501PR (06/2023)
Revêtements métalliques et autres revêtements inorganiques - Couches de conversion au phosphate sur métaux
6/1/2023 - Paper - English, French -
Learn More€80.50 -
NF EN 17832, A91-166 (06/2023)
Projection thermique - Détermination du débit de matière en projection thermique avec un matériau d'apport sous forme de poudre dans un environnement de production
6/1/2023 - Paper - French -
Learn More€48.00 -
NF EN 10244-2, A37-602-2 (06/2023)
Fils et produits tréfilés en acier - Revêtements métalliques non ferreux sur fils d'acier - Partie 2 : revêtement de zinc ou d'alliage de zinc
6/1/2023 - Paper - French -
Learn More€75.67 -
NF EN ISO 15730, A91-154 (05/2023)
Revêtements métalliques et autres revêtements inorganiques - Polissage électrolytique comme procédé de lissage et de passivation des aciers inoxydables
5/1/2023 - Paper - French -
Learn More€48.00 -
PR NF EN 4908, L10-322PR (05/2023)
Série aérospatiale - Procédé de conversion chimique sans chrome hexavalent du magnésium et des alliages de magnesium
5/1/2023 - Paper - English, French -
Learn More€64.50 -
NF EN 13523-14, T37-001-14 (03/2023)
Tôles prélaquées - Méthodes d'essai - Partie 14 : farinage (méthode Helmen)
3/1/2023 - Paper - French -
Learn More€34.67 -
PR NF EN 15520, A91-208PR (03/2023)
Projection thermique - Recommandations relatives à la conception des éléments de construction comportant un revêtement déposé par projection thermique
3/1/2023 - Paper - English, French -
Learn More€74.00 -
NF EN ISO 6769, A91-161 (11/2022)
Émaux vitrifiés - Détermination de la dureté superficielle suivant l'échelle de Mohs
11/1/2022 - Paper - French -
Learn More€34.67 -
NF EN ISO 11127-6, T35-509-6 (11/2022)
Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs non métalliques destinés à la préparation par projection - Partie 6 : détermination des contaminants solubles dans l'eau par conductimétrie
11/1/2022 - Paper - French -
Learn More€48.00 -
NF EN ISO 28765, A91-128 (11/2022)
Emaux vitrifiés - Conception de réservoirs en acier boulonnés pour le stockage ou le traitement des eaux ou des effluents d'eaux usées urbains ou industriels
11/1/2022 - Paper - French -
Learn More€99.33 -
NF EN ISO 16866, A91-055 (11/2022)
Revêtements métalliques et autres revêtements inorganiques - Détermination simultanée de l'épaisseur et du potentiel d'électrode de couches individuelles dans des dépôts de nickel multicouches (essai STEP)
11/1/2022 - Paper - French -
Learn More€60.67 -
NF EN ISO 4530, A91-115 (11/2022)
Pièces manufacturées recouvertes d'émaux vitrifiés - Détermination de la résistance à la chaleur
11/1/2022 - Paper - French -
Learn More€34.67 -
NF EN ISO 23216, A91-156 (11/2022)
Films à base de carbone - Détermination des propriétés optiques des films de carbone amorphe par ellipsométrie spectroscopique
11/1/2022 - Paper - French -
Learn More€48.00 -
NF EN ISO 14571, A91-127 (11/2022)
Revêtements métalliques sur matériaux non-métalliques - Mesurage de l'épaisseur des revêtements - Méthode utilisant la micro-résistivité
11/1/2022 - Paper - French -
Learn More€60.67 -
NF EN ISO 13807, A91-160 (11/2022)
Emaux vitrifiés - Détermination de la température de fissuration par choc thermique d'émaux pour l'industrie chimique
11/1/2022 - Paper - French -
Learn More€48.00 -
NF EN ISO 11127-7, T35-509-7 (11/2022)
Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs non métalliques destinés à la préparation par projection - Partie 7 : Détermination des chlorures solubles dans l'eau
11/1/2022 - Paper - French -
Learn More€48.00 -
NF EN ISO 8291, A91-165 (09/2022)
Emaux vitrifiés - Méthode d'essai des propriétés autonettoyantes
9/1/2022 - Paper - French -
Learn More€25.67 -
NF EN ISO 2747, A91-171 (09/2022)
Émaux vitrifiés - Ustensiles de cuisson émaillés - Détermination de la résistance aux chocs thermiques
9/1/2022 - Paper - French -
Learn More€48.00 -
NF EN ISO 1461, A91-121 (09/2022)
Revêtements par galvanisation à chaud sur produits finis en fonte et en acier - Spécifications et méthodes d'essai
9/1/2022 - Paper - French -
Learn More€68.50 -
NF EN ISO 4532, A91-143 (09/2022)
Emaux vitrifiés - Détermination de la résistance au choc des pièces émaillées - Essai au pistolet
9/1/2022 - Paper - French -
Learn More€48.00 -
NF EN ISO 11125-9, T35-507-9 (06/2022)
Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs métalliques destinés à la préparation par projection - Partie 9 : Essais d'usure et performances
6/1/2022 - Paper - French -
Learn More€75.67 -
NF EN ISO 4528, A91-172 (06/2022)
Vitreous and porcelain enamel finishes - Guide to selection of test methods for vitreous and porcelain enamelled areas of articles
6/1/2022 - Paper - French -
Learn More€75.67 -
NF EN ISO 4531, A91-318 (05/2022)
Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits
5/1/2022 - Paper - French -
Learn More€60.67 -
€144.67
-
NF EN ISO 2080, A91-013 (03/2022)
Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary
3/1/2022 - Paper - French -
Learn More€99.33 -
NF EN ISO 9220, A91-108 (02/2022)
Revêtements métalliques - Mesurage de l'épaisseur de revêtement - Méthode au microscope électronique à balayage
2/1/2022 - Paper - French -
Learn More€75.67 -
NF EN 13523-25, T37-001-25 (02/2022)
Coil coated metals - Test methods - Part 25 : Resistance to humidity
2/1/2022 - Paper - French -
Learn More€48.00 -
NF EN 13523-26, T37-001-26 (02/2022)
Coil coated metals - Test methods - Part 26 : Resistance to condensation of water
2/1/2022 - Paper - French -
Learn More€34.67 -
NF EN 13523-9, T37-001-9 (02/2022)
Coil coated metals - Test methods - Part 9 : Resistance to water immersion
2/1/2022 - Paper - French -
Learn More€48.00 -
NF EN ISO 4524-3, A91-095-3 (11/2021)
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3 : Electrographic tests for porosity
11/1/2021 - Paper - French -
Learn More€25.67 -
NF EN 13523-3, T37-001-3 (10/2021)
Coil coated metals - Test methods - Part 3 : Colour difference - Instrumental comparison
10/1/2021 - Paper - French -
Learn More€48.00 -
NF EN ISO 14922, A91-223 (10/2021)
Thermal spraying - Quality requirements for manufacturers of thermal sprayed coatings - Quality assurance system
10/1/2021 - Paper - French -
Learn More€75.67 -
NF EN ISO 6370-2, A05-002-2 (10/2021)
Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2 : Loss in mass after sub-surface abrasion
10/1/2021 - Paper - French -
Learn More€60.67 -
NF EN 13523-0, T37-001-0 (10/2021)
Coil coated metals - Test methods - Part 0 : General introduction
10/1/2021 - Paper - French -
Learn More€34.67 -
NF EN 13523-7, T37-001-7 (10/2021)
Coil coated metals - Test methods - Part 7 : Resistance to cracking on bending (T-bend test)
10/1/2021 - Paper - French -
Learn More€75.67 -
NF EN ISO 6370-1, A05-002-1 (10/2021)
Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1 : Abrasion testing apparatus
10/1/2021 - Paper - French -
Learn More€34.67 -
€34.67
-
€119.00
-
NF EN ISO 7668, A91-489 (09/2021)
Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
9/1/2021 - Paper - French -
Learn More€75.67 -
NF EN 16980-1, B44-212-1 (09/2021)
Photocatalysis - Continuous flow test methods - Part 1 : Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
9/1/2021 - Paper - French -
Learn More€86.67 -
NF EN 15339-2, A91-231-2 (07/2021)
Thermal spraying - Safety requirements for thermal spraying equipment - Part 2 : Gas control units
7/1/2021 - Paper - French -
Learn More€75.67 -
PR NF EN 14717, A80-101PR (06/2021)
Welding and allied processes - Environmental check list
6/1/2021 - Paper - English, French -
Learn More€74.00 -
NF EN ISO 1463, A91-110 (05/2021)
Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
5/1/2021 - Paper - French -
Learn More€75.67 -
NF EN ISO 3613, A91-473 (05/2021)
Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
5/1/2021 - Paper - French -
Learn More€60.67 -
NF EN ISO 11124-5, T35-505-5 (04/2021)
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 5 : cut steel wire - Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Spécifications pour abrasifs métalliques destinés à la préparation par projection - Partie 5 : Fils d'acier coupé (ISO 11124-5:2020)
4/1/2021 - Paper - French -
Learn More€48.00 -
NF EN ISO 12671, A91-210 (04/2021)
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
4/1/2021 - Paper - French -
Learn More€48.00 -
NF EN ISO 4518, A91-114 (04/2021)
Metallic coatings - Measurement of coating thickness - Profilometric method - Revêtements métalliques - Mesurage de l'épaisseur - Méthode profilométrique
4/1/2021 - Paper - French -
Learn More€60.67 -
NF EN ISO 11127-5, T35-509-5 (02/2021)
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5 : determination of moisture
2/1/2021 - Paper - French -
Learn More€48.00 -
NF EN ISO 11127-3, T35-509-3 (02/2021)
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3 : determination of apparent density
2/1/2021 - Paper - French -
Learn More€48.00 -
NF EN ISO 11127-1, T35-509-1 (02/2021)
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1 : sampling - Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs non métalliques destinés à la préparation par projection - Partie 1 : Échantillonnage
2/1/2021 - Paper - French -
Learn More€48.00 -
NF EN ISO 3861, T47-276 (02/2021)
Rubber hoses and hose assemblies for sand and grit blasting - Specification
2/1/2021 - Paper - French -
Learn More€48.00 -
NF EN ISO 11127-2, T35-509-2 (02/2021)
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2 : determination of particle size distribution
2/1/2021 - Paper - French -
Learn More€48.00 -
NF EN 15655-2, A48-655-2 (11/2020)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2 : thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes - Tuyaux, raccords et accessoires en fonte ductile - Prescriptions et méthodes d'essai pour les revêtements organiques des tuyaux et raccords en fonte ductile - Partie 2 : Revêtements thermoplastiques en polyoléfine modifiée (TPMO) des tuyaux
11/1/2020 - Paper - French -
Learn More€75.67 -
NF EN ISO 8501-4, T35-501-4 (10/2020)
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4 : initial surface conditions, preparation grades and flash rust grades in connection with water jetting - Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Évaluation visuelle de la propreté d'un subjectile - Partie 4 : États de surface initiaux, degrés de préparation et degrés de fleurette de rouille après décapage à l'eau sous haute pression
10/1/2020 - Paper - French -
Learn More€86.67 -
NF EN ISO 11127-4, T35-509-4 (10/2020)
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4 : assessment of hardness by a glass slide test - Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs non métalliques destinés à la préparation par projection - Partie 4 : Évaluation de la dureté au moyen d'un essai à la lame de verre
10/1/2020 - Paper - French -
Learn More€48.00 -
NF EN ISO 8502-9, T35-502-9 (09/2020)
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9 : field method for the conductometric determination of water-soluble salts
9/1/2020 - Paper - French -
Learn More€48.00 -
NF EN ISO 18771, A91-456 (09/2020)
Anodizing of aluminium and its alloys - Method to test the surface abrasion resistance using glass-coated abrasive paper
9/1/2020 - Paper - French -
Learn More€48.00 -
NF EN ISO 1460, A91-123 (09/2020)
Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area
9/1/2020 - Paper - French -
Learn More€34.67 -
€60.67
-
€34.67
-
NF EN 13523-18, T37-001-18 (06/2020)
Coil coated metals - Test methods - Part 18 : resistance to staining
6/1/2020 - Paper - French -
Learn More€48.00 -
NF T34-560 (06/2020)
Paints and varnishes - Thermosetting and thermoplastic powder coating for steel products
6/1/2020 - Paper - French -
Learn More€86.67 -
NF EN 13523-6, T37-001-6 (06/2020)
Coil coated metals - Test methods - Part 6 : adhesion after indentation (cupping test)
6/1/2020 - Paper - French -
Learn More€48.00 -
NF EN ISO 8502-6, T35-502-6 (05/2020)
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6 : extraction of water soluble contaminants for analysis (Bresle method) - Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Essais pour apprécier la propreté d'une surface - Partie 6 : Extraction des contaminants solubles en vue de l'analyse - Méthode de Bresle
5/1/2020 - Paper - French -
Learn More€60.67 -
NF EN ISO 8289-1, A91-319-1 (02/2020)
Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects - Part 1 : swab test for non-profiled surfaces surfaces
2/1/2020 - Paper - French -
Learn More€48.00 -
NF EN ISO 14713-2, A91-130-2 (01/2020)
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2 : hot dip galvanizing
1/1/2020 - Paper - French -
Learn More€86.50 -
NF EN 4707, L10-313 (01/2020)
Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium
1/1/2020 - Paper - English, French -
Learn More€68.50 -
NF EN ISO 2106, A91-480 (01/2020)
Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method - Anodisation de l'aluminium et de ses alliages - Détermination de la masse par unité de surface (masse surfacique) des couches d'oxydation anodique - Méthode gravimétrique
1/1/2020 - Paper - French -
Learn More€48.00 -
NF EN 14901-1+A1, A48-001-1 (11/2019)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1 : epoxy coating (heavy duty)
11/1/2019 - Paper - French -
Learn More€75.67 -
NF EN 14901-1/IN1, A48-001-1/IN1 (11/2019)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1 : epoxy coating (heavy duty)
11/1/2019 - Paper - French -
Learn More€23.00 -
NF EN ISO 8504-2, T35-504-2 (11/2019)
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2 : abrasive blast-cleaning
11/1/2019 - Paper - French -
Learn More€86.67 -
NF EN ISO 8504-1, T35-504-1 (11/2019)
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1 : general principles
11/1/2019 - Paper - French -
Learn More€48.00 -
NF EN 14901-2, A48-001-2 (11/2019)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2 : thermoplastic acid modified polyolefin coating (TMPO) - Tuyaux, raccords et accessoires en fonte ductile - Prescriptions et méthodes d'essai relatives aux revêtements organiques des raccords et accessoires en fonte ductile - Partie 2 : revêtement thermoplastique en polyoléfine modifiée par un acide
11/1/2019 - Paper - French -
Learn More€75.50 -
NF EN ISO 12944-5, T34-555-5 (10/2019)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5 : protective paint systems
10/1/2019 - Paper - French -
Learn More€86.50 -
NF EN ISO 21968, A91-321 (10/2019)
Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
10/1/2019 - Paper - French -
Learn More€86.67 -
NF EN ISO 28721-1, A91-320-1 (10/2019)
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1 : quality requirements for apparatus, components, appliances and accessories
10/1/2019 - Paper - French -
Learn More€86.50 -
NF EN 13523-19, T37-001-19 (09/2019)
Coil coated metals - Test methods - Part 19 : panel design and method of atmospheric exposure testing
9/1/2019 - Paper - French -
Learn More€75.67 -
NF EN 13523-11, T37-001-11 (09/2019)
Coil coated metals - Test methods - Part 11 : resistance to solvents (rubbing test)
9/1/2019 - Paper - French -
Learn More€34.67 -
NF EN 13523-17, T37-001-17 (09/2019)
Coil coated metals - Test methods - Part 17 : adhesion of strippable films
9/1/2019 - Paper - French -
Learn More€48.00 -
NF EN ISO 28763, A91-322 (09/2019)
Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications
9/1/2019 - Paper - French -
Learn More€60.50 -
NF EN 3837, L10-305 (08/2019)
Aerospace series - Paints and varnishes - Nature and method for surface preparation of test pieces in aluminium alloys
8/1/2019 - Paper - English, French -
Learn More€68.50 -
NF A35-035 (07/2019)
Steel products - Hot-dip zinc or zinc-aluminium coated prestressing smooth wires and 7-wire strands
7/1/2019 - Paper - French -
Learn More€75.67 -
NF D14-503 (05/2019)
Sanitary appliances - Resistance to thermal shock of enamelled surfaces - Test method
5/1/2019 - Paper - French -
Learn More€25.50 -
NF D14-506 (05/2019)
Sanitary appliances - Resistance to acids at ambient temperature of enamelled surfaces - Conventional test method
5/1/2019 - Paper - French -
Learn More€34.67 -
NF EN ISO 8289-2, A91-319-2 (04/2019)
Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects - Part 2 : slurry test for profile surfaces
4/1/2019 - Paper - French -
Learn More€48.00 -
NF EN ISO 2376, A91-483 (04/2019)
Anodizing of aluminium and its alloys - Determination of electric breakdown voltage and withsand voltage - Anodisation de l'aluminium et de ses alliages - Détermination de la tension électrique de claquage
4/1/2019 - Paper - French -
Learn More€34.67 -
NF EN ISO 11177, A91-314 (04/2019)
Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing - Émaux vitrifiés - Robinetterie émaillée à l'intérieur et à l'extérieur et raccords de tuyauterie pour conduites forcées destinées à l'alimentation en eau non traitée et en eau potable - Exigences de qualité et essais
4/1/2019 - Paper - French -
Learn More€48.00 -
NF EN ISO 2063-1, A91-201-1 (03/2019)
Thermal spraying - Zinc, aluminium and their alloys - Part 1 : design considerations and quality requirements for corrosion protection systems
3/1/2019 - Paper - French -
Learn More€99.33 -
NF EN ISO 10111, A91-125 (02/2019)
Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
2/1/2019 - Paper - French -
Learn More€60.67 -
NF EN 15655-1, A48-655-1 (12/2018)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1 : polyurethane lining of pipes and fittings - Tuyaux, raccords et accessoires en fonte ductile - Revêtement intérieur en polyuréthane des tuyaux et raccords - Prescriptions et méthodes d'essais
12/1/2018 - Paper - French -
Learn More€73.00 -
NF EN ISO 8504-3, T35-504-3 (12/2018)
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3 : hand - and power-tool cleaning
12/1/2018 - Paper - French -
Learn More€48.00 -
NF EN ISO 3211, A91-486 (12/2018)
Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation
12/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 8994, A91-493 (12/2018)
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method
12/1/2018 - Paper - French -
Learn More€48.00 -
NF EN ISO 6158, A91-301 (12/2018)
Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes
12/1/2018 - Paper - French -
Learn More€75.67 -
NF EN ISO 21809-1, A49-721-1 (11/2018)
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1 : polyolefin coatings (3-layer PE and 3-layer PP) - Industries du pétrole et du gaz naturel - Revêtements externes des conduites enterrées et immergées utilisées dans les systèmes de transport par conduites - Partie 1 : Revêtements à base de polyoléfines (PE tri-couche et PP tri-couche)
11/1/2018 - Paper - French -
Learn More€140.00 -
NF EN 13144, A91-142 (11/2018)
Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test
11/1/2018 - Paper - French -
Learn More€73.00 -
NF EN ISO 11126-4, T35-508-4 (10/2018)
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4 : coal furnace slag
10/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 11126-1, T35-508-1 (10/2018)
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1 : general introduction and classification
10/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 11126-7, T35-508-7 (10/2018)
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7 : fused aluminium oxide
10/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 11125-1, T35-507-1 (10/2018)
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1 : sampling - Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs métalliques destinés à la préparation par projection - Partie 1 : Échantillonnage
10/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 8993, A91-492 (10/2018)
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method
10/1/2018 - Paper - French -
Learn More€73.00 -
NF EN ISO 11126-5, T35-508-5 (10/2018)
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5 : nickel slag - Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Spécifications pour abrasifs non métalliques destinés à la préparation par projection - Partie 5 : Scories de raffinage du nickel
10/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 11124-3, T35-505-3 (10/2018)
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3 : high-carbon cast-steel shot and grit
10/1/2018 - Paper - French -
Learn More€58.62 -
NF EN ISO 11126-3, T35-508-3 (10/2018)
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3 : copper refinery slag
10/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 11126-8, T35-508-8 (10/2018)
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8 : olivine
10/1/2018 - Paper - French -
Learn More€48.00 -
NF EN ISO 11125-7, T35-507-7 (10/2018)
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7 : determination of moisture
10/1/2018 - Paper - French -
Learn More€46.50 -
NF EN ISO 11126-6, T35-508-6 (10/2018)
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6 : Iron and steel slags
10/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 11124-4, T35-505-4 (09/2018)
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4 : low-carbon cast-steel shot
9/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 11125-5, T35-507-5 (09/2018)
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5 : determination of percentage defective particles and of microstructure
9/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 6581, A91-487 (09/2018)
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
9/1/2018 - Paper - French -
Learn More€34.50 -
NF EN ISO 11124-2, T35-505-2 (09/2018)
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2 : chilled-iron grit
9/1/2018 - Paper - French -
Learn More€48.00 -
NF EN ISO 2085, A91-479 (09/2018)
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
9/1/2018 - Paper - French -
Learn More€34.50 -
NF EN ISO 11125-3, T35-507-3 (09/2018)
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3 : determination of hardness
9/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 8251, A91-491 (09/2018)
Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
9/1/2018 - Paper - French -
Learn More€96.12 -
NF EN ISO 11125-6, T35-507-6 (09/2018)
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6 : determination of foreign matter - Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs métalliques destinés à la préparation par projection - Partie 6 : Détermination des matières étrangères
9/1/2018 - Paper - French -
Learn More€33.62 -
NF EN ISO 10683, E25-040 (09/2018)
Fasteners - Non-electrolytically applied zinc flake coatings systems - Fixations - Revêtements non électrolytiques de zinc lamellaire
9/1/2018 - Paper - French -
Learn More€99.00 -
NF EN ISO 11125-4, T35-507-4 (09/2018)
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4 : determination of apparent density
9/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 11124-1, T35-505-1 (09/2018)
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2 : general introduction and classification
9/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 11125-2, T35-507-2 (09/2018)
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2 : determination of particle size distribution
9/1/2018 - Paper - French -
Learn More€48.00 -
NF EN 13507, A91-224 (08/2018)
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
8/1/2018 - Paper - French -
Learn More€48.00 -
NF EN 17002, A91-242 (08/2018)
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification
8/1/2018 - Paper - French -
Learn More€46.55 -
NF EN 1395-5, A91-226-5 (08/2018)
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5 : plasma spraying in chambers
8/1/2018 - Paper - French -
Learn More€60.67 -
NF EN 17001, A91-243 (08/2018)
Thermal spraying - Components with thermally sprayed coatings - Coating specification
8/1/2018 - Paper - French -
Learn More€42.11 -
NF EN 17059, T35-024 (06/2018)
Plating and anodizing lines - safety requirements - Equipement de traitement de finition chimique et électrolytique - Exigences de sécurité
6/1/2018 - Paper - French -
Learn More€135.40 -
€86.67
-
NF EN ISO 2081, A91-102 (05/2018)
Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel
5/1/2018 - Paper - French -
Learn More€60.50 -
NF EN ISO 10215, A91-494 (05/2018)
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method
5/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 2819, A91-140 (03/2018)
Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion
3/1/2018 - Paper - French -
Learn More€60.50 -
NF EN ISO 2931, A91-484 (02/2018)
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
2/1/2018 - Paper - French -
Learn More€48.00 -
€60.50
-
NF EN ISO 12944-6, T34-555-6 (02/2018)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6 : laboratory performance test methods
2/1/2018 - Paper - French -
Learn More€75.50 -
NF EN ISO 7599, A91-450 (02/2018)
Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium - Anodisation de l'aluminium et de ses alliages - Spécifications générales pour couches anodiques sur aluminium
2/1/2018 - Paper - French -
Learn More€86.50 -
NF EN ISO 12944-9, T34-555-9 (02/2018)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9 : protective paint systems and laboratory performance test methods for offshore and related structures - Peintures et vernis - Anticorrosion des structures en acier par systèmes de peinture - Partie 9 : Systèmes de peinture et essais de performance en laboratoire pour la protection des structures offshore et structures associées
2/1/2018 - Paper - French -
Learn More€86.67 -
NF EN ISO 28706-3, A92-200-3 (02/2018)
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3 : determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle
2/1/2018 - Paper - French -
Learn More€73.23 -
NF EN ISO 11126-10, T35-508-10 (02/2018)
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10 : almandite garnet
2/1/2018 - Paper - French -
Learn More€48.00 -
NF EN ISO 27830, A91-050 (01/2018)
Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings - Revêtements métalliques et autres revêtements inorganiques - Lignes directrices pour spécifier des revêtements métalliques et inorganiques
1/1/2018 - Paper - French -
Learn More€60.50 -
NF EN 15773, T30-508 (01/2018)
Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines
1/1/2018 - Paper - French -
Learn More€73.23 -
NF EN ISO 17836, A91-227 (01/2018)
Thermal spraying - Determination of the deposition efficiency for thermal spraying
1/1/2018 - Paper - French -
Learn More€46.55 -
NF EN 4729, L10-318 (12/2017)
Aerospace series - Trivalent chromium based chemical conversion coatings for aluminium and aluminium alloys
12/1/2017 - Paper - English, French -
Learn More€64.01 -
NF EN ISO 12944-1, T34-555-1 (12/2017)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1 : General introduction
12/1/2017 - Paper - French -
Learn More€60.50 -
NF EN ISO 12944-8, T34-555-8 (12/2017)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8 : Development of specifications for new work and maintenance - Peintures et vernis - Anticorrosion des structures en acier par systèmes de peinture - Partie 8 : Développement de spécifications pour les travaux neufs et l'entretien
12/1/2017 - Paper - French -
Learn More€108.00 -
NF EN ISO 12944-4, T34-555-4 (12/2017)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4 : Types of surface and surface preparation
12/1/2017 - Paper - French -
Learn More€86.50 -
NF EN ISO 12944-2, T34-555-2 (12/2017)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2 : Classification of environments
12/1/2017 - Paper - French -
Learn More€60.50 -
NF EN ISO 12944-7, T34-555-7 (12/2017)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7 : Execution and supervision of paint work
12/1/2017 - Paper - French -
Learn More€60.50 -
NF EN ISO 3210, A91-485 (12/2017)
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
12/1/2017 - Paper - French -
Learn More€48.00 -
NF EN ISO 12944-3, T34-555-3 (12/2017)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3 : Design considerations
12/1/2017 - Paper - French -
Learn More€75.50 -
NF EN ISO 2143, A91-482 (11/2017)
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment - Anodisation de l'aluminium et de ses alliages - Appréciation de la perte du pouvoir absorbant des couches anodiques après colmatage - Essai à la goutte de colorant avec action acide préalable
11/1/2017 - Paper - French -
Learn More€48.00 -
NF EN ISO 2360, A91-113 (10/2017)
Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
10/1/2017 - Paper - French -
Learn More€99.00 -
NF EN ISO 2082, A91-053 (10/2017)
Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel
10/1/2017 - Paper - French -
Learn More€75.50 -
NF EN ISO 9717, A91-501 (10/2017)
Metallic and other inorganic coatings - Phosphate conversion coating of metals
10/1/2017 - Paper - French -
Learn More€75.50 -
NF EN ISO 2063-2, A91-201-2 (10/2017)
Thermal spraying - Zinc, aluminium and their alloys - Part 2 : execution of corrosion protection systems - Projection thermique - Revêtements métalliques et inorganiques - Zinc, aluminium et alliages de ces métaux
10/1/2017 - Paper - French -
Learn More€108.33 -
NF EN ISO 20274, A91-317 (08/2017)
Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient - Emaux vitrifiés - Préparation d'échantillons émaillés et détermination du coefficient de la dilatation thermique
8/1/2017 - Paper - French -
Learn More€46.55 -
NF EN 13523-8, T37-001-8 (07/2017)
Coil coated metals - Test methods - Part 8 : Resistance to salt spray (fog) - Tôles prélaquées - Méthodes d'essais - Partie 8 : Résistance au brouillard salin
7/1/2017 - Paper - French -
Learn More€48.00 -
NF EN 13523-24, T37-001-24 (07/2017)
Coil coated metals - Test methods - Part 24 : resistance to blocking and pressure marking - Tôles prélaquées - Méthodes d'essais - Partie 24 : Résistance au marbrage
7/1/2017 - Paper - French -
Learn More€60.67 -
NF EN 13523-21, T37-001-21 (07/2017)
Coil coated metals - Test methods - Part 21 : Evaluation of outdoor exposed panels - Tôles prélaquées - Méthodes d'essais - Partie 21 : Évaluation des panneaux exposés en extérieur
7/1/2017 - Paper - French -
Learn More€75.67 -
NF EN ISO 14232-1, A91-241-1 (06/2017)
Thermal spraying - Powders - Part 1 : characterization and technical supply conditions
6/1/2017 - Paper - French -
Learn More€60.67 -
NF EN ISO 14713-3, A91-130-3 (06/2017)
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3 : Sherardizing
6/1/2017 - Paper - French -
Learn More€60.67 -
NF EN ISO 14713-1, A91-130-1 (06/2017)
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1 : general principles of design and corrosion resistance
6/1/2017 - Paper - French -
Learn More€86.67 -
€86.67
-
NF EN ISO 19496-1, A91-316-1 (05/2017)
Vitreous and porcelain enamels - Terminology - Part 1 : terms and definitions
5/1/2017 - Paper - French -
Learn More€83.85 -
NF EN 13523-27, T37-001-27 (05/2017)
Coil coated metals - Test methods - Part 27 : resistance to humid poultice (Cataplasm test)
5/1/2017 - Paper - French -
Learn More€48.00 -
NF EN ISO 8503-5, T35-503-5 (05/2017)
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5 : replica tape method for the determination of the surface profile
5/1/2017 - Paper - French -
Learn More€60.50 -
NF EN ISO 28706-2, A92-200-2 (05/2017)
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2 : determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours
5/1/2017 - Paper - French -
Learn More€73.23 -
NF EN ISO 14916, A91-211 (05/2017)
Thermal spraying - Determination of tensile adhesive strength
5/1/2017 - Paper - French -
Learn More€108.00 -
NF EN ISO 19496-2, A91-316-2 (05/2017)
Vitreous and porcelain enamels - Terminology - Part 2 : visual representations and descriptions
5/1/2017 - Paper - French -
Learn More€73.23 -
NF EN 13523-10, T37-001-10 (04/2017)
Coil coated metals - Test methods - Part 10 : resistance to fluorescent UV radiation and water condensation
4/1/2017 - Paper - French -
Learn More€48.00 -
NF EN ISO 8502-3, T35-502-3 (04/2017)
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3 : assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) - Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Essais pour apprécier la propreté d'une surface - Partie 3 : évaluation de la poussière sur les surfaces d'acier préparées pour la mise en peinture (méthode du ruban adhésif sensible à la presion)
4/1/2017 - Paper - French -
Learn More€60.50 -
NF EN 13523-22, T37-001-22 (04/2017)
Coil coated metals - Test methods - Part 22 : colour difference - Visual comparison
4/1/2017 - Paper - French -
Learn More€48.00 -
NF EN ISO 8502-4, T35-502-4 (04/2017)
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4 : guidance on the estimation of the probability of condensation prior to paint application
4/1/2017 - Paper - French -
Learn More€86.67 -
€48.00
-
NF EN ISO 8502-2, T35-502-2 (04/2017)
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2 : laboratory determination of chloride on cleaned surfaces
4/1/2017 - Paper - French -
Learn More€48.00 -
NF EN ISO 8401, A91-107 (04/2017)
Metallic coatings - Review of methods of measurement of ductility
4/1/2017 - Paper - French -
Learn More€108.00 -
NF EN 13523-12, T37-001-12 (04/2017)
Coil coated metals - Test methods - Part 12 : resistance to scratching
4/1/2017 - Paper - French -
Learn More€48.00 -
NF EN 16845-1, B44-411-1 (04/2017)
Photocatalysis - Anti-soiling chemical activity using adsorbed organics under solid/solid conditions - Part 1 : dyes on porous surfaces
4/1/2017 - Paper - French -
Learn More€83.85 -
NF EN 13523-29, T37-001-29 (04/2017)
Coil coated metals - Test methods - Part 29 : resistance to environmental soiling (Dirt pick-up and striping)
4/1/2017 - Paper - French -
Learn More€48.00 -
NF EN ISO 19598, A91-014 (12/2016)
Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
12/1/2016 - Paper - French -
Learn More€60.50 -
NF EN 16813, A91-240 (12/2016)
Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method - Projection thermique - Mesurage de la conductivité électrique des revêtements métalliques non ferreux obtenus par projection thermique, à l'aide de la méthodes par courants de Foucault
12/1/2016 - Paper - French -
Learn More€58.62 -
NF T35-506 (11/2016)
Paints and varnishes - Shop primers pigmented with zinc powder - Definition of surface secondary preparation grades - Peintures et vernis - Peintures primaires d'atelier à la poussière de zinc - Définition des degrés de préparation secondaire de surface
11/1/2016 - Paper - French -
Learn More€48.00 -
NF EN ISO 26423, A92-811 (06/2016)
Fine ceramics (advanced ceramics,advanced technical ceramics) - Determination of coating thickness by crater-grinding method - Céramiques techniques avancées - Méthodes d'essai pour revêtements céramiques - Partie 2 : détermination de l'épaisseur du revêtement par la méthode d'abrasion d'une calotte sphérique
6/1/2016 - Paper - French -
Learn More€75.67 -
NF EN ISO 2179, A91-081 (06/2016)
Electroplated coatings of tin-nickel alloy - Specification and test methods
6/1/2016 - Paper - French -
Learn More€48.00