25.220.20 : Surface treatment
-
DIN EN ISO 12736-1:2024-02
Oil and gas industries including lower carbon energy - Wet thermal insulation systems for pipelines and subsea equipment - Part 1: Validation of materials and insulation systems (ISO 12736-1:2023), English version EN ISO 12736-1:2023
2/1/2024 - PDF - English, German - DIN
Learn More€158.04 -
DIN EN ISO 12736-2:2024-02
Oil and gas industries including lower carbon energy - Wet thermal insulation systems for pipelines and subsea equipment - Part 2: Qualification processes for production and application procedures (ISO 12736-2:2023), English version EN ISO 12736-2:2023
2/1/2024 - PDF - English, German - DIN
Learn More€158.04 -
DIN EN ISO 12736-3:2024-02
Oil and gas industries including lower carbon energy - Wet thermal insulation systems for pipelines and subsea equipment - Part 3: Interfaces between systems, field joint system, field repairs and prefabricated insulation (ISO 12736-3:2023), English version EN ISO 12736-3:2023
2/1/2024 - PDF - English, German - DIN
Learn More€169.25 -
DIN EN ISO 14919:2024-02
Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification and technical supply conditions (ISO 14919:2023), German version EN ISO 14919:2023
2/1/2024 - PDF - German - DIN
Learn More€85.79 -
DIN EN ISO 14920:2023-11
Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2023), German version EN ISO 14920:2023
11/1/2023 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 15730:2023-09
Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel (ISO 15730:2023), German version EN ISO 15730:2023
9/1/2023 - PDF - German - DIN
Learn More€72.80 -
DIN EN 17832:2023-08
Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment, German version EN 17832:2023
8/1/2023 - PDF - German - DIN
Learn More€59.63 -
DIN EN ISO 9717:2023-05
Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO/DIS 9717:2023), German and English version prEN ISO 9717:2023
5/1/2023 - PDF - English, German - DIN
Learn More€79.72 -
DIN EN 15520:2023-02
Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings, German and English version prEN 15520:2023
2/1/2023 - PDF - English, German - DIN
Learn More€72.80 -
DIN 17611:2022-08
Anodized products of wrought aluminium and wrought aluminium alloys - Technical conditions of delivery
8/1/2022 - PDF - German - DIN
Learn More€52.90 -
DIN EN ISO 14922:2022-02
Thermal spraying - Quality requirements for manufacturers of thermal sprayed coatings (ISO 14922:2021), German version EN ISO 14922:2021
2/1/2022 - PDF - German - DIN
Learn More€92.62 -
DIN EN ISO 7668:2021-11
Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85° (ISO 7668:2021), German version EN ISO 7668:2021
11/1/2021 - PDF - German - DIN
Learn More€79.72 -
DIN 52980:2021-10
Photocatalytic activity of surfaces - Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
10/1/2021 - PDF - German - DIN
Learn More€72.80 -
DIN EN 15339-2:2021-09
Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units, German version EN 15339-2:2021
9/1/2021 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 12671:2021-08
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings (ISO 12671:2021), German version EN ISO 12671:2021
8/1/2021 - PDF - German - DIN
Learn More€65.89 -
DIN EN ISO 1463:2021-08
Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021), German version EN ISO 1463:2021
8/1/2021 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 3613:2021-08
Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2021), German version EN ISO 3613:2021
8/1/2021 - PDF - German - DIN
Learn More€79.72 -
DIN CEN/TR 15339-6:2020-11
Thermal spraying - Safety requirements for thermal spraying equipment - Part 6: Spray booth, Handling system, Dust collection, Exhaust system, Filter, German version CEN/TR 15339-6:2014
11/1/2020 - PDF - German - DIN
Learn More€63.64 -
DIN CEN/TR 15339-1:2020-11
Thermal spraying - Safety requirements for thermal spraying equipment - Part 1: General requirements, German version CEN/TR 15339-1:2014
11/1/2020 - PDF - German - DIN
Learn More€47.66 -
DIN CEN/TR 15339-3:2020-11
Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units, German version CEN/TR 15339-3:2014
11/1/2020 - PDF - German - DIN
Learn More€47.66 -
DIN CEN/TR 15339-4:2020-11
Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply, German version CEN/TR 15339-4:2014
11/1/2020 - PDF - German - DIN
Learn More€63.64 -
DIN CEN/TR 15339-5:2020-11
Thermal spraying - Safety requirements for thermal spraying equipment - Part 5: Powder and wire feed units, German version CEN/TR 15339-5:2014
11/1/2020 - PDF - German - DIN
Learn More€36.82 -
DIN EN ISO 18771:2020-11
Anodizing of aluminium and its alloys - Method to test the surface abrasion resistance using glass-coated abrasive paper (ISO 18771:2019), German version EN ISO 18771:2020
11/1/2020 - PDF - German - DIN
Learn More€65.89 -
DIN EN 17393:2020-09
Thermal spraying - Tubular coating tensile test, German version EN 17393:2020
9/1/2020 - PDF - German - DIN
Learn More€65.89 -
DIN EN ISO 2106:2020-05
Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019), German version EN ISO 2106:2020
5/1/2020 - PDF - German - DIN
Learn More€59.63 -
DIN EN 4707:2020-05
Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium, German and English version EN 4707:2020
5/1/2020 - PDF - English, German - DIN
Learn More€72.80 -
DIN EN ISO 2376:2019-07
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019), German version EN ISO 2376:2019
7/1/2019 - PDF - German - DIN
Learn More€45.98 -
DIN EN ISO 2063-1:2019-07
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019), German version EN ISO 2063-1:2019
7/1/2019 - PDF - German - DIN
Learn More€110.00 -
DIN EN 17120:2019-05
Photocatalysis - Water purification - Performance of photocatalytic materials by measurement of phenol degradation, German version EN 17120:2019
5/1/2019 - PDF - German - DIN
Learn More€59.63 -
DIN EN ISO 10111:2019-04
Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019), German version EN ISO 10111:2019
4/1/2019 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 3211:2019-03
Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018), German version EN ISO 3211:2018
3/1/2019 - PDF - German - DIN
Learn More€59.63 -
DIN EN ISO 8994:2019-03
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2018), German version EN ISO 8994:2018
3/1/2019 - PDF - German - DIN
Learn More€52.90 -
DIN EN ISO 2085:2018-12
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
12/1/2018 - PDF - English - DIN
Learn More€49.16 -
DIN EN ISO 6581:2018-12
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2018)
12/1/2018 - PDF - English - DIN
Learn More€57.57 -
DIN EN ISO 8251:2018-12
Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018), German version EN ISO 8251:2018
12/1/2018 - PDF - German - DIN
Learn More€110.00 -
DIN EN ISO 2085:2018-12
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018), German version EN ISO 2085:2018
12/1/2018 - PDF - German - DIN
Learn More€39.35 -
DIN EN ISO 6581:2018-12
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2018), German version EN ISO 6581:2018
12/1/2018 - PDF - German - DIN
Learn More€45.98 -
DIN EN ISO 8993:2018-12
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2018), German version EN ISO 8993:2018
12/1/2018 - PDF - German - DIN
Learn More€72.80 -
DIN EN 17001:2018-10
Thermal spraying - Components with thermally sprayed coatings - Coating specification, German version EN 17001:2018
10/1/2018 - PDF - German - DIN
Learn More€52.90 -
DIN EN 17002:2018-10
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification, German version EN 17002:2018
10/1/2018 - PDF - German - DIN
Learn More€59.63 -
DIN EN 17059:2018-10
Plating and anodizing lines - Safety requirements, German version EN 17059:2018
10/1/2018 - PDF - German - DIN
Learn More€163.74 -
DIN EN 13507:2018-10
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
10/1/2018 - PDF - English - DIN
Learn More€66.07 -
DIN EN 17001:2018-10
Thermal spraying - Components with thermally sprayed coatings - Coating specification
10/1/2018 - PDF - English - DIN
Learn More€66.07 -
DIN EN 17002:2018-10
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification
10/1/2018 - PDF - English - DIN
Learn More€74.58 -
DIN EN 1395-5:2018-10
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
10/1/2018 - PDF - English - DIN
Learn More€82.52 -
€204.86
-
DIN EN 1395-5:2018-10
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers, German version EN 1395-5:2018
10/1/2018 - PDF - German - DIN
Learn More€65.89 -
DIN EN 13507:2018-10
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying, German version EN 13507:2018
10/1/2018 - PDF - German - DIN
Learn More€52.90 -
DIN EN ISO 14918:2018-09
Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018), German version EN ISO 14918:2018
9/1/2018 - PDF - German - DIN
Learn More€92.62 -
DIN EN ISO 14918:2018-09
Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018)
9/1/2018 - PDF - English - DIN
Learn More€115.98 -
DIN EN ISO 2143:2018-09
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
9/1/2018 - PDF - English - DIN
Learn More€74.58 -
DIN EN ISO 2143:2018-09
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017), German version EN ISO 2143:2017
9/1/2018 - PDF - German - DIN
Learn More€59.63 -
DIN EN ISO 10215:2018-06
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018), German version EN ISO 10215:2018
6/1/2018 - PDF - German - DIN
Learn More€65.89 -
DIN EN ISO 7599:2018-05
Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
5/1/2018 - PDF - English - DIN
Learn More€115.98 -
DIN EN ISO 7599:2018-05
Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018), German version EN ISO 7599:2018
5/1/2018 - PDF - German - DIN
Learn More€92.62 -
DIN EN ISO 2931:2018-04
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)
4/1/2018 - PDF - English - DIN
Learn More€82.52 -
DIN EN ISO 2931:2018-04
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017), German version EN ISO 2931:2018
4/1/2018 - PDF - German - DIN
Learn More€65.89 -
DIN EN ISO 17836:2018-03
Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017), German version EN ISO 17836:2017
3/1/2018 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 17836:2018-03
Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)
3/1/2018 - PDF - English - DIN
Learn More€91.12 -
DIN EN ISO 27830:2018-03
Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017)
3/1/2018 - PDF - English - DIN
Learn More€91.12 -
DIN EN ISO 3210:2018-03
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)
3/1/2018 - PDF - English - DIN
Learn More€82.52 -
DIN EN ISO 3210:2018-03
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017), German version EN ISO 3210:2017
3/1/2018 - PDF - German - DIN
Learn More€65.89 -
DIN EN ISO 27830:2018-03
Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017), German version EN ISO 27830:2017
3/1/2018 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 2063-2:2018-02
Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
2/1/2018 - PDF - English - DIN
Learn More€150.93 -
DIN EN ISO 9717:2018-02
Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)
2/1/2018 - PDF - English - DIN
Learn More€99.44 -
DIN EN ISO 9717:2018-02
Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017), German version EN ISO 9717:2017
2/1/2018 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 2063-2:2018-02
Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017), German version EN ISO 2063-2:2017
2/1/2018 - PDF - German - DIN
Learn More€120.84 -
DIN 19279:2018-01
Photocatalytic activity of surfaces - Determination of the photocatalytic deposition velocity of nitrogen monoxide at photocatalytically active surfaces
1/1/2018 - PDF - German - DIN
Learn More€72.80 -
DIN 50938:2018-01
Black oxide coatings on ferrous metal components - Requirements and test methods
1/1/2018 - PDF - German - DIN
Learn More€52.90 -
DIN EN ISO 14916:2017-08
Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017), German version EN ISO 14916:2017
8/1/2017 - PDF - German - DIN
Learn More€99.35 -
DIN EN ISO 14917:2017-08
Thermal spraying - Terminology, classification (ISO 14917:2017)
8/1/2017 - PDF - English - DIN
Learn More€124.21 -
DIN EN ISO 14916:2017-08
Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017)
8/1/2017 - PDF - English - DIN
Learn More€124.21 -
DIN EN ISO 14232-1:2017-08
Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017)
8/1/2017 - PDF - English - DIN
Learn More€91.12 -
DIN EN ISO 14917:2017-08
Thermal spraying - Terminology, classification (ISO 14917:2017), German version EN ISO 14917:2017
8/1/2017 - PDF - German - DIN
Learn More€99.35 -
DIN EN ISO 14232-1:2017-08
Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017), German version EN ISO 14232-1:2017
8/1/2017 - PDF - German - DIN
Learn More€72.80 -
DIN EN 16845-1:2017-05
Photocatalysis - Anti-soiling chemical activity using adsorbed organics under solid/solid conditions - Part 1: Dyes on porous surfaces, German version EN 16845-1:2017
5/1/2017 - PDF - German - DIN
Learn More€99.35 -
DIN EN 16845-1:2017-05
Photocatalysis - Anti-soiling chemical activity using adsorbed organics under solid/solid conditions - Part 1: Dyes on porous surfaces
5/1/2017 - PDF - English - DIN
Learn More€124.21 -
DIN EN 16813:2017-02
Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method, German version EN 16813:2016
2/1/2017 - PDF - German - DIN
Learn More€72.80 -
DIN EN 16813:2017-02
Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
2/1/2017 - PDF - English - DIN
Learn More€91.12 -
DIN EN ISO 12670:2015-12
Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011), German version EN ISO 12670:2015
12/1/2015 - PDF - German - DIN
Learn More€59.63 -
DIN EN ISO 12670:2015-12
Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011)
12/1/2015 - PDF - English - DIN
Learn More€74.58 -
DIN EN ISO 12679:2015-12
Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011), German version EN ISO 12679:2015
12/1/2015 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 12679:2015-12
Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011)
12/1/2015 - PDF - English - DIN
Learn More€99.44 -
DIN 50935-1:2015-12
Chromium(VI) free passivation of non-ferrous metals - Part 1: Zinc die-casting
12/1/2015 - PDF - German - DIN
Learn More€52.90 -
DIN 50935-2:2015-12
Chromium(VI) free passivation of non-ferrous metals - Part 2: Aluminium and aluminium alloys
12/1/2015 - PDF - German - DIN
Learn More€45.98 -
DIN CEN/TS 16599*DIN SPEC 7397:2014-07
Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions, German version CEN/TS 16599:2014
7/1/2014 - PDF - German - DIN
Learn More€68.60 -
DIN EN ISO 13123:2012-04
Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011), German version EN ISO 13123:2011
4/1/2012 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 13123:2012-04
Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011)
4/1/2012 - PDF - English - DIN
Learn More€91.12 -
DIN EN ISO 14921:2011-04
Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010), German version EN ISO 14921:2010
4/1/2011 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 14921:2011-04
Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010)
4/1/2011 - PDF - English - DIN
Learn More€91.12 -
DIN EN ISO 6719:2011-02
Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010), German version EN ISO 6719:2010
2/1/2011 - PDF - German - DIN
Learn More€65.89 -
DIN EN ISO 6719:2011-02
Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010)
2/1/2011 - PDF - English - DIN
Learn More€82.52 -
DIN EN ISO 7759:2010-12
Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010), German version EN ISO 7759:2010
12/1/2010 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 7759:2010-12
Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)
12/1/2010 - PDF - English - DIN
Learn More€91.12 -
DIN EN ISO 2128:2010-12
Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010), German version EN ISO 2128:2010
12/1/2010 - PDF - German - DIN
Learn More€45.98 -
DIN EN ISO 2128:2010-12
Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010)
12/1/2010 - PDF - English - DIN
Learn More€57.57 -
DIN EN 15520:2007-11
Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings; German version EN 15520:2007
11/1/2007 - PDF - German - DIN
Learn More€72.80 -
DIN EN 15520:2007-11
Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings; German version EN 15520:2007
11/1/2007 - PDF - English - DIN
Learn More€91.12 -
DIN EN 15340:2007-06
Thermal spraying - Determination of shear load resistance of thermally sprayed coatings; German version EN 15340:2007
6/1/2007 - PDF - German - DIN
Learn More€72.80 -
DIN EN 15340:2007-06
Thermal spraying - Determination of shear load resistance of thermally sprayed coatings; German version EN 15340:2007
6/1/2007 - PDF - English - DIN
Learn More€91.12 -
DIN EN 1395-1:2007-04
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1: General requirements; German version EN 1395-1:2007
4/1/2007 - PDF - German - DIN
Learn More€52.90 -
DIN EN 1395-1:2007-04
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1: General requirements; German version EN 1395-1:2007
4/1/2007 - PDF - English - DIN
Learn More€66.07 -
DIN EN 1395-2:2007-04
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVOF; German version EN 1395-2:2007
4/1/2007 - PDF - German - DIN
Learn More€52.90 -
DIN EN 1395-2:2007-04
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVOF; German version EN 1395-2:2007
4/1/2007 - PDF - English - DIN
Learn More€66.07 -
DIN EN 1395-3:2007-04
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying; German version EN 1395-3:2007
4/1/2007 - PDF - German - DIN
Learn More€45.98 -
DIN EN 1395-3:2007-04
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying; German version EN 1395-3:2007
4/1/2007 - PDF - English - DIN
Learn More€57.57 -
DIN EN 1395-4:2007-04
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying; German version EN 1395-4:2007
4/1/2007 - PDF - German - DIN
Learn More€52.90 -
DIN EN 1395-4:2007-04
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying; German version EN 1395-4:2007
4/1/2007 - PDF - English - DIN
Learn More€66.07 -
DIN EN 1395-6:2007-04
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems; German version EN 1395-6:2007
4/1/2007 - PDF - German - DIN
Learn More€52.90 -
DIN EN 1395-6:2007-04
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems; German version EN 1395-6:2007
4/1/2007 - PDF - English - DIN
Learn More€66.07 -
DIN EN 1395-7:2007-04
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed systems; German version EN 1395-7:2007
4/1/2007 - PDF - German - DIN
Learn More€45.98 -
DIN EN 1395-7:2007-04
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed systems; German version EN 1395-7:2007
4/1/2007 - PDF - English - DIN
Learn More€57.57 -
DIN EN ISO 14924:2005-11
Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005); German version EN ISO 14924:2005
11/1/2005 - PDF - German - DIN
Learn More€52.90 -
DIN EN ISO 14924:2005-11
Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005); German version EN ISO 14924:2005
11/1/2005 - PDF - English - DIN
Learn More€66.07 -
DIN EN ISO 17834:2004-02
Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003); German version EN ISO 17834:2003
2/1/2004 - PDF - German - DIN
Learn More€52.90 -
DIN EN ISO 17834:2004-02
Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003); German version EN ISO 17834:2003
2/1/2004 - PDF - English - DIN
Learn More€66.07 -
DIN EN ISO 14923:2003-10
Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003); German version EN ISO 14923:2003
10/1/2003 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 14923:2003-10
Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003); German version EN ISO 14923:2003
10/1/2003 - PDF - English - DIN
Learn More€91.12