25.220.20 : Surface treatment
-
NBN EN 1395-5:2018
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
9/19/2018 - PDF - French -
Learn More€89.00 -
NBN EN 17002:2018
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification
9/19/2018 - PDF - English -
Learn More€58.00 -
NBN EN 13507:2018
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
9/19/2018 - PDF - English -
Learn More€58.00 -
NBN EN 17002:2018
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification
9/19/2018 - PDF - French -
Learn More€58.00 -
NBN EN 13507:2018
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
9/19/2018 - PDF - French -
Learn More€58.00 -
NBN EN 17001:2018
Thermal spraying - Components with thermally sprayed coatings - Coating specification
9/19/2018 - PDF - English -
Learn More€58.00 -
NBN EN 1395-5:2018
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
9/19/2018 - PDF - German -
Learn More€89.00 -
NBN EN 17001:2018
Thermal spraying - Components with thermally sprayed coatings - Coating specification
9/19/2018 - PDF - French -
Learn More€58.00 -
NBN EN 17002:2018
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification
9/19/2018 - PDF - German -
Learn More€58.00 -
NBN EN 13507:2018
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
9/19/2018 - PDF - German -
Learn More€58.00 -
ISO 8993:2018
Anodizing of aluminium and its alloys
Rating system for the evaluation of pitting corrosion
9/18/2018 - Paper - French -
Learn More€72.00 -
ISO 8993:2018
Anodizing of aluminium and its alloys
Rating system for the evaluation of pitting corrosion
9/18/2018 - Paper - English -
Learn More€72.00 -
18/30383423 DC:2018
BS EN 3523. Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Bar for machining. De = 100 mm. 1 080 MPa = Rm = 1 280 MPa
9/13/2018 - PDF - English -
Learn More€24.00 -
18/30383421 DC:2018
BS EN 2213. Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Bars. De = 16 mm. 980 MPa = Rm = 1 180 MPa
9/13/2018 - PDF - English -
Learn More€24.00 -
18/30383426 DC:2018
BS EN 3526. Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Sheet and strip. 0,5 mm = a = 6 mm. 980 MPa = Rm = 1 180 MPa
9/13/2018 - PDF - English -
Learn More€24.00 -
18/30383424 DC:2018
BS EN 3524. Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Sheet and strip. 2 mm = a = 6 mm. 1 080 MPa = Rm = 1 280 MPa
9/13/2018 - PDF - English -
Learn More€24.00 -
18/30383422 DC:2018
BS EN 2252. Aerospace series. Steel 15CrMoV6 (1.7334). 1 080 MPa = Rm = 1 250 MPa. Forgings. De = 100 mm
9/13/2018 - PDF - English -
Learn More€24.00 -
18/30383425 DC:2018
BS EN 3525. Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Plate. 6 mm < a = 20 mm. 1 080 MPa = Rm = 1 280 MPa
9/13/2018 - PDF - English -
Learn More€24.00 -
18/30383179 DC:2018
BS EN 3207. Aerospace series. Rubber compounds. Technical specification
9/7/2018 - PDF - English -
Learn More€24.00 -
DIN EN ISO 2143:2018-09
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
9/1/2018 - PDF - English -
Learn More€74.58 -
DIN EN ISO 14918:2018-09
Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018)
9/1/2018 - PDF - English -
Learn More€115.98 -
DVS 2319:2018-09
Nachbehandeln und Nachbearbeiten von thermisch gespritzten Schichten
9/1/2018 - PDF - German -
Learn More€39.50 -
NF EN ISO 6581, A91-487 (09/2018)
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
9/1/2018 - Paper - French -
Learn More€34.50 -
€48.75
-
NF EN ISO 2085, A91-479 (09/2018)
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
9/1/2018 - Paper - French -
Learn More€34.50 -
DIN EN ISO 2143:2018-09
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017), German version EN ISO 2143:2017
9/1/2018 - PDF - German -
Learn More€59.63 -
NF EN ISO 8251, A91-491 (09/2018)
Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
9/1/2018 - Paper - French -
Learn More€96.12 -
DIN EN ISO 14918:2018-09
Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018), German version EN ISO 14918:2018
9/1/2018 - PDF - German -
Learn More€92.62 -
DVS 2318:2018-09
Ausgewählte technologische Eigenschaften und Merkmale von thermisch gespritzten Schichten
9/1/2018 - PDF - German -
Learn More€68.13 -
ISO 6581:2018
Anodizing of aluminium and its alloys
Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
8/22/2018 - Paper - English -
Learn More€48.00 -
ISO 2085:2018
Anodizing of aluminium and its alloys
Check for continuity of thin anodic oxidation coatings
8/22/2018 - Paper - French -
Learn More€48.00 -
ISO 6581:2018
Anodizing of aluminium and its alloys
Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
8/22/2018 - Paper - French -
Learn More€48.00 -
ISO 2085:2018
Anodizing of aluminium and its alloys
Check for continuity of thin anodic oxidation coatings
8/22/2018 - Paper - English -
Learn More€48.00 -
BS EN 17002:2018
Thermal spraying. Components with thermally sprayed coatings. Thermal spray procedure specification
8/15/2018 - PDF - English -
Learn More€180.00 -
BS EN 1395-5:2018
Thermal spraying. Acceptance inspection of thermal spraying equipment Plasma in chambers
8/15/2018 - PDF - English -
Learn More€180.00 -
BS EN 17001:2018
Thermal spraying. Components with thermally sprayed coatings. Coating specification
8/15/2018 - PDF - English -
Learn More€151.00 -
ISO 8251:2018
Anodizing of aluminium and its alloys
Measurement of abrasion resistance of anodic oxidation coatings
8/8/2018 - Paper - French -
Learn More€174.00 -
ISO 8251:2018
Anodizing of aluminium and its alloys
Measurement of abrasion resistance of anodic oxidation coatings
8/8/2018 - Paper - English -
Learn More€174.00 -
NF EN 17002, A91-242 (08/2018)
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification
8/1/2018 - Paper - French -
Learn More€46.55 -
DVS 2301:2018-08
Thermisches Spritzen - Verfahrensvarianten, Durchführung, Prüfung und Anwendungen
8/1/2018 - PDF - German -
Learn More€87.63 -
NF EN 1395-5, A91-226-5 (08/2018)
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5 : plasma spraying in chambers
8/1/2018 - Paper - French -
Learn More€60.67 -
NF EN 17001, A91-243 (08/2018)
Thermal spraying - Components with thermally sprayed coatings - Coating specification
8/1/2018 - Paper - French -
Learn More€42.11 -
NF EN 13507, A91-224 (08/2018)
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
8/1/2018 - Paper - French -
Learn More€48.00 -
18/30381685 DC:2018
BS EN 4878-001. Aerospace series. Polytetrafluoroethylene (PTFE) Part 001. Moulded
7/31/2018 - PDF - English -
Learn More€24.00 -
18/30381687 DC:2018
BS EN 4878-002. Aerospace series. Polytetrafluoroethylene (PTFE) Part 002. Ram extruded
7/31/2018 - PDF - English -
Learn More€24.00 -
18/30381688 DC:2018
BS EN 4878-003. Aerospace series. Polytetrafluoroethylene (PTFE) Part 003. Paste extruded
7/31/2018 - PDF - English -
Learn More€24.00 -
€184.00
-
NBN EN ISO 14918:2018
Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018)
7/25/2018 - PDF - French -
Learn More€121.00 -
€184.00
-
NBN EN ISO 14918:2018
Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018)
7/25/2018 - PDF - English -
Learn More€121.00 -
€184.00
-
NBN EN ISO 14918:2018
Thermisches Spritzen - Prüfung von thermischen Spritzern (ISO 14918:2018)
7/25/2018 - PDF - German -
Learn More€121.00 -
BS ISO 21164:2018
Metallic and other inorganic coatings. DC magnetron sputtered silver coatings for engineering purposes. Measurement of coating adhesion
7/20/2018 - PDF - English -
Learn More€151.00 -
ISO 21164:2018 (R2024)
Metallic and other inorganic coatings
DC magnetron sputtered silver coatings for engineering purposes
7/19/2018 - Paper - English -
Learn More€48.00 -
UNE-EN ISO 2063-2:2018
Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
7/4/2018 - PDF - Spanish -
Learn More€92.00 -
UNE-EN ISO 2063-2:2018
Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
7/4/2018 - PDF - English -
Learn More€110.40 -
UNE-EN 17059:2018
Plating and anodizing lines - Safety requirements (Endorsed by Asociación Española de Normalización in July of 2018.)
7/1/2018 - PDF - English -
Learn More€112.00 -
18/30380201 DC:2018
BS EN 2002-001. Aerospace series. Metallic materials. Test methods Part 001. Tensile testing at ambient temperature
6/29/2018 - PDF - English -
Learn More€24.00 -
UNE-EN ISO 7599:2018
Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
6/27/2018 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 7599:2018
Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
6/27/2018 - PDF - English -
Learn More€88.80 -
€377.00
-
UNE-EN ISO 2360:2018
Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
6/13/2018 - PDF - Spanish -
Learn More€89.00 -
€250.00
-
UNE-EN ISO 2360:2018
Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
6/13/2018 - PDF - English -
Learn More€106.80 -
UNE-EN ISO 9717:2018
Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)
6/6/2018 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 10215:2018
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018)
6/6/2018 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 9717:2018
Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)
6/6/2018 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 10215:2018
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018)
6/6/2018 - PDF - English -
Learn More€72.00 -
NF EN 17059, T35-024 (06/2018)
Plating and anodizing lines - safety requirements - Equipement de traitement de finition chimique et électrolytique - Exigences de sécurité
6/1/2018 - Paper - French -
Learn More€135.40 -
DIN EN ISO 10215:2018-06
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018), German version EN ISO 10215:2018
6/1/2018 - PDF - German -
Learn More€65.89 -
€86.67
-
UNE-EN ISO 2143:2018
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
5/30/2018 - PDF - Spanish -
Learn More€57.00 -
UNE-EN ISO 27830:2018
Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017)
5/30/2018 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 2143:2018
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
5/30/2018 - PDF - English -
Learn More€68.40 -
UNE-EN ISO 27830:2018
Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017)
5/30/2018 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 2931:2018
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)
5/16/2018 - PDF - Spanish -
Learn More€57.00 -
UNE-EN ISO 3210:2018
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)
5/16/2018 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 2931:2018
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)
5/16/2018 - PDF - English -
Learn More€68.40 -
UNE-EN ISO 3210:2018
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)
5/16/2018 - PDF - English -
Learn More€72.00 -
18/30377548 DC:2018
BS EN 3381. Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MOS2 lubricated. Classification: 1 100 MPa (at ambient temperature)/ 315°C
5/10/2018 - PDF - English -
Learn More€24.00 -
18/30377547 DC:2018
BS EN 4614. Aerospace series. Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, wide series. Dimensions and loads. Inch series
5/10/2018 - PDF - English -
Learn More€24.00 -
18/30377532 DC:2018
BS EN 4013. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification 1 550 MPa (at ambient temperature) / 600°C
5/10/2018 - PDF - English -
Learn More€24.00 -
18/30377533 DC:2018
BS EN 4496. Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification 1 100 MPa (at ambient temperature) / 315°C
5/10/2018 - PDF - English -
Learn More€24.00 -
DIN EN ISO 7599:2018-05
Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
5/1/2018 - PDF - English -
Learn More€115.98 -
DIN EN ISO 7599:2018-05
Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018), German version EN ISO 7599:2018
5/1/2018 - PDF - German -
Learn More€92.62 -
NF EN ISO 10215, A91-494 (05/2018)
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method
5/1/2018 - Paper - French -
Learn More€46.55 -
NBN EN ISO 10215:2018
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018)
4/27/2018 - PDF - German -
Learn More€58.00 -
NBN EN ISO 10215:2018
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018)
4/27/2018 - PDF - English -
Learn More€58.00 -
NBN EN ISO 10215:2018
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018)
4/27/2018 - PDF - French -
Learn More€58.00 -
BS EN ISO 10215:2018
Anodizing of aluminium and its alloys. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
4/20/2018 - PDF - English -
Learn More€180.00 -
18/30376600 DC:2018
BS EN 4700-002. Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Part 002. Bar section
4/18/2018 - PDF - English -
Learn More€24.00 -
ASD-STAN prEN 4707 (11/04/2018)
Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium
4/11/2018 - PDF - English -
Learn More€56.00 -
€148.00
-
€148.00
-
18/30375890 DC:2018
BS EN 2997-002. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C 260°C peak Part 002. Specification of performance and contact arrangements
4/4/2018 - PDF - English -
Learn More€24.00 -
DIN EN ISO 2931:2018-04
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017), German version EN ISO 2931:2018
4/1/2018 - PDF - German -
Learn More€65.89 -
DIN EN ISO 2931:2018-04
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)
4/1/2018 - PDF - English -
Learn More€82.52 -
NBN EN ISO 7599:2018
Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
3/23/2018 - PDF - English -
Learn More€121.00 -
NBN EN ISO 7599:2018
Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
3/23/2018 - PDF - French -
Learn More€121.00 -
NBN EN ISO 7599:2018
Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
3/23/2018 - PDF - German -
Learn More€121.00 -
BS EN ISO 17836:2017
Thermal spraying. Determination of the deposition efficiency for thermal spraying
3/9/2018 - PDF - English -
Learn More€180.00 -
DIN EN ISO 17836:2018-03
Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017), German version EN ISO 17836:2017
3/1/2018 - PDF - German -
Learn More€72.80 -
DIN EN ISO 17836:2018-03
Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)
3/1/2018 - PDF - English -
Learn More€91.12 -
18/30374261 DC:2018
BS EN 4869-104. Aerospace series. Expanded beam termini, fibre optic non physical contact in 3645 standard cavities Part 104. Female termini size 12 technical specification
3/1/2018 - PDF - English -
Learn More€24.00 -
DIN EN ISO 27830:2018-03
Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017), German version EN ISO 27830:2017
3/1/2018 - PDF - German -
Learn More€72.80 -
18/30374259 DC:2018
BS EN 4869-102. Aerospace series. Expanded beam termini, fibre optic non physical contact in 3645 standard cavities Part 102. Female termini size 16 technical specification
3/1/2018 - PDF - English -
Learn More€24.00 -
18/30374257 DC:2018
BS EN 4869-001. Aerospace series. Expanded beam termini, fibre optic non physical contact in 3645 standard cavities Part 001. Technical specification
3/1/2018 - PDF - English -
Learn More€24.00 -
DIN EN ISO 27830:2018-03
Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017)
3/1/2018 - PDF - English -
Learn More€91.12 -
DIN EN ISO 3210:2018-03
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)
3/1/2018 - PDF - English -
Learn More€82.52 -
18/30374260 DC:2018
BS EN 4869-103. Aerospace series. Expanded beam termini, fibre optic non physical contact in 3645 standard cavities Part 103. Male termini size 12 technical specification
3/1/2018 - PDF - English -
Learn More€24.00 -
DIN EN ISO 3210:2018-03
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017), German version EN ISO 3210:2017
3/1/2018 - PDF - German -
Learn More€65.89 -
18/30374258 DC:2018
BS EN 4869-101. Aerospace series. Expanded beam termini, fibre optic non physical contact in 3645 standard cavities Part 101. Male termini size 16 technical specification
3/1/2018 - PDF - English -
Learn More€24.00 -
NBN EN ISO 2931:2018
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)
2/28/2018 - PDF - English -
Learn More€37.00 -
NBN EN ISO 2931:2018
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)
2/28/2018 - PDF - French -
Learn More€37.00 -
NBN EN ISO 2931:2018
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)
2/28/2018 - PDF - German -
Learn More€37.00 -
BS EN ISO 7599:2018
Anodizing of aluminium and its alloys. Method for specifying decorative and protective anodic oxidation coatings on aluminium
2/23/2018 - PDF - English -
Learn More€250.00 -
BS EN ISO 2931:2018
Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
2/21/2018 - PDF - English -
Learn More€151.00 -
ISO 10215:2018 (R2023)
Anodizing of aluminium and its alloys
Visual determination of image clarity of anodic oxidation coatings
2/8/2018 - Paper - English -
Learn More€72.00 -
ISO 10215:2018 (R2023)
Anodizing of aluminium and its alloys
Visual determination of image clarity of anodic oxidation coatings
2/8/2018 - Paper - French -
Learn More€72.00 -
DIN EN ISO 9717:2018-02
Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017), German version EN ISO 9717:2017
2/1/2018 - PDF - German -
Learn More€79.72 -
NF EN ISO 7599, A91-450 (02/2018)
Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium - Anodisation de l'aluminium et de ses alliages - Spécifications générales pour couches anodiques sur aluminium
2/1/2018 - Paper - French -
Learn More€86.50 -
DIN EN ISO 2063-2:2018-02
Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017), German version EN ISO 2063-2:2017
2/1/2018 - PDF - German -
Learn More€120.84 -
DIN EN ISO 2063-2:2018-02
Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
2/1/2018 - PDF - English -
Learn More€150.93 -
NF EN ISO 2931, A91-484 (02/2018)
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
2/1/2018 - Paper - French -
Learn More€48.00 -
DIN EN ISO 9717:2018-02
Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)
2/1/2018 - PDF - English -
Learn More€99.44 -
NBN EN ISO 27830:2018
Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017)
1/30/2018 - PDF - French -
Learn More€58.00 -
NBN EN ISO 17836:2018
Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)
1/30/2018 - PDF - German -
Learn More€58.00 -
NBN EN ISO 3210:2018
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)
1/30/2018 - PDF - German -
Learn More€58.00 -
NBN EN ISO 27830:2018
Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017)
1/30/2018 - PDF - German -
Learn More€58.00 -
NBN EN ISO 17836:2018
Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)
1/30/2018 - PDF - English -
Learn More€58.00 -
NBN EN ISO 17836:2018
Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)
1/30/2018 - PDF - French -
Learn More€58.00 -
NBN EN ISO 3210:2018
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)
1/30/2018 - PDF - English -
Learn More€58.00 -
NBN EN ISO 27830:2018
Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017)
1/30/2018 - PDF - English -
Learn More€58.00 -
NBN EN ISO 3210:2018
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)
1/30/2018 - PDF - French -
Learn More€58.00 -
BS EN ISO 3210:2017
Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
1/26/2018 - PDF - English -
Learn More€151.00 -
18/30372569 DC:2018
BS EN 6140. Aerospace series. Plug, protective, non metallic for flared and flareless fine thread fitting ends
1/26/2018 - PDF - English -
Learn More€24.00 -
BS EN ISO 27830:2017
Metallic and other inorganic coatings. Requirements for the designation of metallic and inorganic coatings
1/15/2018 - PDF - English -
Learn More€180.00 -
PD ISO/TS 16688:2017
Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
1/11/2018 - PDF - English -
Learn More€293.00 -
ISO 7599:2018 (R2023)
Anodizing of aluminium and its alloys
Method for specifying decorative and protective anodic oxidation coatings on aluminium
1/10/2018 - Paper - French -
Learn More€148.00 -
ISO 7599:2018 (R2023)
Anodizing of aluminium and its alloys
Method for specifying decorative and protective anodic oxidation coatings on aluminium
1/10/2018 - Paper - English -
Learn More€148.00 -
DIN 19279:2018-01
Photocatalytic activity of surfaces - Determination of the photocatalytic deposition velocity of nitrogen monoxide at photocatalytically active surfaces
1/1/2018 - PDF - German -
Learn More€72.80 -
NF EN ISO 27830, A91-050 (01/2018)
Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings - Revêtements métalliques et autres revêtements inorganiques - Lignes directrices pour spécifier des revêtements métalliques et inorganiques
1/1/2018 - Paper - French -
Learn More€60.50 -
NF EN ISO 17836, A91-227 (01/2018)
Thermal spraying - Determination of the deposition efficiency for thermal spraying
1/1/2018 - Paper - French -
Learn More€46.55 -
DIN 50938:2018-01
Black oxide coatings on ferrous metal components - Requirements and test methods
1/1/2018 - PDF - German -
Learn More€52.90 -
NBN EN ISO 2143:2017
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
12/21/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 2143:2017
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
12/21/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 2143:2017
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
12/21/2017 - PDF - English -
Learn More€37.00 -
18/30371343 DC:2017
BS EN 4688. Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing epoxy primer. High corrosion resistance for military application
12/18/2017 - PDF - English -
Learn More€24.00 -
18/30371344 DC:2017
BS EN 4689. Aerospace series. Paints and varnishes. Two components cold curing polyurethane finish. High flexibility and chemical agent resistance for military application
12/18/2017 - PDF - English -
Learn More€24.00 -
17/30371341 DC:2017
BS EN 4687. Aerospace series. Paints and varnishes. Chromate free (non corrosion inhibiting) two component cold curing primer. Chromate free primer for military application
12/18/2017 - PDF - English -
Learn More€24.00 -
BS EN ISO 2143:2017
Anodizing of aluminium and its alloys. Estimation of loss of absorptive power of anodic oxidation coatings after sealing. Dye-spot test with prior acid treatment
12/11/2017 - PDF - English -
Learn More€180.00 -
ISO 2931:2017 (R2023)
Anodizing of aluminium and its alloys
Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
12/4/2017 - Paper - English -
Learn More€48.00 -
ISO 2931:2017 (R2023)
Anodizing of aluminium and its alloys
Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
12/4/2017 - Paper - French -
Learn More€48.00 -
NF EN ISO 3210, A91-485 (12/2017)
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
12/1/2017 - Paper - French -
Learn More€48.00 -
NF EN 4729, L10-318 (12/2017)
Aerospace series - Trivalent chromium based chemical conversion coatings for aluminium and aluminium alloys
12/1/2017 - Paper - English, French -
Learn More€64.01 -
17/30370705 DC:2017
BS EN 3685. Aerospace series. Bolts in heat resisting steel FE-PA2601 (A286). Classification: 1 100 MPa/650°C. Technical specification
11/29/2017 - PDF - English -
Learn More€24.00 -
NBN EN ISO 2063-2:2017
Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
11/22/2017 - PDF - French -
Learn More€163.00 -
NBN EN ISO 9717:2017
Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)
11/22/2017 - PDF - German -
Learn More€89.00 -
NBN EN ISO 2063-2:2017
Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
11/22/2017 - PDF - German -
Learn More€163.00 -
NBN EN ISO 9717:2017
Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)
11/22/2017 - PDF - English -
Learn More€89.00 -
NBN EN ISO 9717:2017
Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)
11/22/2017 - PDF - French -
Learn More€89.00 -
NBN EN ISO 2063-2:2017
Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
11/22/2017 - PDF - English -
Learn More€163.00 -
ISO 27830:2017 (R2023)
Metallic and other inorganic coatings
Requirements for the designation of metallic and inorganic coatings
11/21/2017 - Paper - French -
Learn More€72.00 -
ISO 27830:2017 (R2023)
Metallic and other inorganic coatings
Requirements for the designation of metallic and inorganic coatings
11/21/2017 - Paper - English -
Learn More€72.00 -
BS EN ISO 9717:2017
Metallic and other inorganic coatings. Phosphate conversion coating of metals
11/9/2017 - PDF - English -
Learn More€180.00 -
€71.00
-
NF EN ISO 2143, A91-482 (11/2017)
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment - Anodisation de l'aluminium et de ses alliages - Appréciation de la perte du pouvoir absorbant des couches anodiques après colmatage - Essai à la goutte de colorant avec action acide préalable
11/1/2017 - Paper - French -
Learn More€48.00 -
17/30369271 DC:2017
BS EN 4860. Aerospace series. Environmental testing. Test Xb. A brasion of markings, letterings, surfaces and materials caused by rubbin g of fingertips and hands
10/31/2017 - PDF - English -
Learn More€24.00 -
ISO 17836:2017 (R2023)
Thermal spraying
Determination of the deposition efficiency for thermal spraying
10/31/2017 - Paper - French -
Learn More€72.00 -
ISO 17836:2017 (R2023)
Thermal spraying
Determination of the deposition efficiency for thermal spraying
10/31/2017 - Paper - English -
Learn More€72.00 -
ISO 3210:2017 (R2023)
Anodizing of aluminium and its alloys
Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
10/30/2017 - Paper - English -
Learn More€72.00 -
ISO 3210:2017 (R2023)
Anodizing of aluminium and its alloys
Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
10/30/2017 - Paper - French -
Learn More€72.00 -
BS ISO 10216:2017
Anodizing of aluminium and its alloys. Instrumental determination of image clarity of anodic oxidation coatings. Instrumental method
10/25/2017 - PDF - English -
Learn More€180.00 -
BS ISO 2135:2017
Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
10/25/2017 - PDF - English -
Learn More€151.00 -
BS EN ISO 2063-2:2017
Thermal spraying. Zinc, aluminium and their alloys Execution of corrosion protection systems
10/23/2017 - PDF - English -
Learn More€331.00 -
UNE-EN ISO 14917:2017
Thermal spraying - Terminology, classification (ISO 14917:2017)
10/11/2017 - PDF - Spanish -
Learn More€76.00 -
UNE-EN ISO 14916:2017
Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017)
10/11/2017 - PDF - Spanish -
Learn More€77.00 -
UNE-EN ISO 14232-1:2017
Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017)
10/11/2017 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 14917:2017
Thermal spraying - Terminology, classification (ISO 14917:2017)
10/11/2017 - PDF - English -
Learn More€91.20 -
UNE-EN ISO 14916:2017
Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017)
10/11/2017 - PDF - English -
Learn More€92.40 -
UNE-EN ISO 14232-1:2017
Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017)
10/11/2017 - PDF - English -
Learn More€81.60 -
ISO 2143:2017 (R2023)
Anodizing of aluminium and its alloys
Estimation of loss of absorptive power of anodic oxidation coatings after sealing
10/10/2017 - Paper - French -
Learn More€48.00 -
ISO 2143:2017 (R2023)
Anodizing of aluminium and its alloys
Estimation of loss of absorptive power of anodic oxidation coatings after sealing
10/10/2017 - Paper - English -
Learn More€48.00 -
ISO 10216:2017
Anodizing of aluminium and its alloys
Instrumental determination of image clarity of anodic oxidation coatings
10/9/2017 - Paper - English -
Learn More€72.00 -
ISO 2135:2017
Anodizing of aluminium and its alloys
Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
10/9/2017 - Paper - English -
Learn More€48.00 -
17/30368045 DC:2017
BS EN 4857-1. Aerospace series. Miniature Connectors, High density, electrical, circular, scoop-proof, triple start threaded coupling, operating temperatures 175 °C continuous or 200 continuous. Shell sizes : 05 to 07 Part 001. Technical specification
10/6/2017 - PDF - English -
Learn More€24.00 -
17/30368055 DC:2017
prEN 4857-006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous. Part 006. Protective cap for receptacle. Product standard
10/6/2017 - PDF - English -
Learn More€24.00 -
17/30368049 DC:2017
BS EN 4857-004. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous Part 004. Receptacle, hermetic, square flange mounting. Product standard
10/6/2017 - PDF - English -
Learn More€24.00 -
17/30368059 DC:2017
prEN 4857-009. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous. Part 009. Receptacle, round flange, jamnut mounting. Product standard
10/6/2017 - PDF - English -
Learn More€24.00 -
17/30368046 DC:2017
BS EN 4857-002. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous Part 002. Specification of performance and contact arrangements
10/6/2017 - PDF - English -
Learn More€24.00 -
17/30368056 DC:2017
prEN 4857-007. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous. Part 007. Protective cap for plug. Product standard
10/6/2017 - PDF - English -
Learn More€24.00 -
17/30368051 DC:2017
BS EN 4857-005. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous Part 005. Receptacle, hermetic, round flange, brasage mounting. Product standard
10/6/2017 - PDF - English -
Learn More€24.00 -
17/30368060 DC:2017
prEN 4857-010. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous. Part 010. Receptacle, hermetic, round flange, jam nut mounting. Product standard
10/6/2017 - PDF - English -
Learn More€24.00 -
17/30368047 DC:2017
BS EN 4857-003. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous Part 003. Receptacle square flange mounting. Product standard
10/6/2017 - PDF - English -
Learn More€24.00 -
17/30368057 DC:2017
prEN 4857-008. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous. Part 008. Non release plug with grounding ring. Product standard 008: ring -
10/6/2017 - PDF - English -
Learn More€24.00 -
NF EN ISO 2063-2, A91-201-2 (10/2017)
Thermal spraying - Zinc, aluminium and their alloys - Part 2 : execution of corrosion protection systems - Projection thermique - Revêtements métalliques et inorganiques - Zinc, aluminium et alliages de ces métaux
10/1/2017 - Paper - French -
Learn More€108.33 -
NF EN ISO 2360, A91-113 (10/2017)
Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
10/1/2017 - Paper - French -
Learn More€99.00 -
PD ISO/TR 14232-2:2017
Thermal spraying. Powders Comparison of coating performance and spray powder chemistry
9/25/2017 - PDF - English -
Learn More€293.00 -
NBN EN ISO 2360:2017
Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
9/22/2017 - PDF - German -
Learn More€142.00 -
NBN EN ISO 2360:2017
Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
9/22/2017 - PDF - English -
Learn More€142.00