25.220.20 : Surface treatment
-
ASTM B833-20 + Redline
Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
4/1/2020 - PDF - English -
Learn More€61.00 -
ASTM F21-20
Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
4/1/2020 - PDF - English -
Learn More€51.00 -
UNE-EN ISO 10111:2020
Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019)
3/4/2020 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 10111:2020
Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019)
3/4/2020 - PDF - English -
Learn More€81.60 -
BS EN ISO 2376:2019 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Determination of breakdown voltage and withstand voltage
2/28/2020 - PDF - English -
Learn More€197.00 -
NBN EN 4707:2020
Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium
2/27/2020 - PDF - English -
Learn More€89.00 -
NBN EN ISO 2106:2020
Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
2/27/2020 - PDF - German -
Learn More€58.00 -
BS EN ISO 17836:2017 + Redline
Tracked Changes. Thermal spraying. Determination of the deposition efficiency for thermal spraying
2/27/2020 - PDF - English -
Learn More€235.00 -
NBN EN 4707:2020
Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium
2/27/2020 - PDF - French -
Learn More€89.00 -
NBN EN ISO 2106:2020
Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
2/27/2020 - PDF - English -
Learn More€58.00 -
NBN EN 4707:2020
Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium
2/27/2020 - PDF - German -
Learn More€89.00 -
NBN EN ISO 2106:2020
Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
2/27/2020 - PDF - French -
Learn More€58.00 -
BS EN ISO 10215:2018 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
2/27/2020 - PDF - English -
Learn More€235.00 -
BS EN ISO 8993:2018 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method
2/26/2020 - PDF - English -
Learn More€235.00 -
BS EN 1395-5:2018 + Redline
Tracked Changes. Thermal spraying. Acceptance inspection of thermal spraying equipment Plasma in chambers
2/26/2020 - PDF - English -
Learn More€235.00 -
BS ISO 2135:2017 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
2/26/2020 - PDF - English -
Learn More€197.00 -
BS EN ISO 8251:2018 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
2/26/2020 - PDF - English -
Learn More€382.00 -
BS EN ISO 8994:2018 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Grid method
2/26/2020 - PDF - English -
Learn More€197.00 -
BS EN ISO 27830:2017 + Redline
Tracked Changes. Metallic and other inorganic coatings. Requirements for the designation of metallic and inorganic coatings
2/26/2020 - PDF - English -
Learn More€235.00 -
BS EN ISO 14918:2018 + Redline
Tracked Changes. Thermal spraying. Qualification testing of thermal sprayers
2/26/2020 - PDF - English -
Learn More€326.00 -
BS EN ISO 6581:2018 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
2/26/2020 - PDF - English -
Learn More€197.00 -
BS EN ISO 2143:2017 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Estimation of loss of absorptive power of anodic oxidation coatings after sealing. Dye-spot test with prior acid treatment
2/25/2020 - PDF - English -
Learn More€235.00 -
BS EN ISO 2085:2018 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
2/25/2020 - PDF - English -
Learn More€197.00 -
BS EN ISO 3210:2017 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
2/25/2020 - PDF - English -
Learn More€197.00 -
BS EN ISO 2931:2018 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
2/25/2020 - PDF - English -
Learn More€197.00 -
BS EN ISO 2063-1:2019 + Redline
Tracked Changes. Thermal spraying. Zinc, aluminium and their alloys Design considerations quality requirements for corrosion protection systems
2/24/2020 - PDF - English -
Learn More€382.00 -
BS EN ISO 10111:2019 + Redline
Tracked Changes. Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods
2/24/2020 - PDF - English -
Learn More€235.00 -
BS EN ISO 3211:2018 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation
2/24/2020 - PDF - English -
Learn More€197.00 -
BS EN ISO 9717:2017 + Redline
Tracked Changes. Metallic and other inorganic coatings. Phosphate conversion coating of metals
2/24/2020 - PDF - English -
Learn More€235.00 -
BS EN ISO 2063-2:2017 + Redline
Tracked Changes. Thermal spraying. Zinc, aluminium and their alloys Execution of corrosion protection systems
2/24/2020 - PDF - English -
Learn More€432.00 -
UNE-EN 17120:2020
Photocatalysis - Water purification - Performance of photocatalytic materials by measurement of phenol degradation
2/5/2020 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 17120:2020
Photocatalysis - Water purification - Performance of photocatalytic materials by measurement of phenol degradation
2/5/2020 - PDF - English -
Learn More€72.00 -
UNE-EN 4707:2020
Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium (Endorsed by Asociación Española de Normalización in February of 2020.)
2/1/2020 - PDF - English -
Learn More€59.00 -
20/30411149 DC:2020
BS EN 3375-011. Aerospace series. Cable, electrical for digital data transmission Part 011. Single braid. Star Quad 100 ohms. Light weight. Type KL. Product standard
1/27/2020 - PDF - English -
Learn More€24.00 -
BS EN ISO 2106:2020
Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
1/23/2020 - PDF - English -
Learn More€151.00 -
BS EN 4707:2020
Aerospace series. Acid pickling of aluminium and aluminium alloys without hexavalent chromium
1/23/2020 - PDF - English -
Learn More€180.00 -
20/30410794 DC:2020
BS EN 4827. Aerospace series. Hexavalent chromium free anodizing of aluminium and aluminium alloys
1/20/2020 - PDF - English -
Learn More€24.00 -
BS EN ISO 7599:2018 + Redline
Tracked changes. Anodizing of aluminium and its alloys. Method for specifying decorative and protective anodic oxidation coatings on aluminium
1/20/2020 - PDF - English -
Learn More€326.00 -
20/30410778 DC:2020
BS EN 3660-003. Aerospace series. Cable outlet accessories for circular and rectangular electrical optical connectors Part 003. Grommet nut, style A. Product standard
1/17/2020 - PDF - English -
Learn More€24.00 -
20/30410779 DC:2020
BS EN 3660-004. Aerospace series. Cable outlet accessories for circular and rectangular electrical optical connectors Part 004. outlet, style A, straight, unsealed with clamp strain relief. Product standard
1/17/2020 - PDF - English -
Learn More€24.00 -
20/30410780 DC:2020
BS EN 3660-005. Aerospace series. Cable outlet accessories for circular and rectangular electrical optical connectors Part 005. outlet, style A, 90°, unsealed with clamp strain relief. Product standard
1/17/2020 - PDF - English -
Learn More€24.00 -
20/30410756 DC:2020
BS EN 4860. Aerospace series. Environmental testing. Test Xb: Abrasion of markings, letterings, surfaces and materials caused by rubbing of fingertips and hands
1/16/2020 - PDF - English -
Learn More€24.00 -
NF EN ISO 2106, A91-480 (01/2020)
Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method - Anodisation de l'aluminium et de ses alliages - Détermination de la masse par unité de surface (masse surfacique) des couches d'oxydation anodique - Méthode gravimétrique
1/1/2020 - Paper - French -
Learn More€48.00 -
NF EN 4707, L10-313 (01/2020)
Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium
1/1/2020 - Paper - English, French -
Learn More€68.50 -
19/30408756 DC:2019
BS EN 4890. Aerospace series. Steel X4CrNiMo16-5-1. Air melted. Hardened and tempered. Sheets and plates. 0,6 mm = a = 50 mm. 900 MPa = Rm = 1 050 MPa
12/20/2019 - PDF - English -
Learn More€24.00 -
UNE-EN ISO 2376:2019
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)
12/4/2019 - PDF - Spanish -
Learn More€53.00 -
UNE-EN ISO 2376:2019
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)
12/4/2019 - PDF - English -
Learn More€63.60 -
19/30406770 DC:2019
BS EN 2995-006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 Part 006. 6,3 mm & 2,8mm blade terminal. With polarized signal contact. Product standard
11/28/2019 - PDF - English -
Learn More€24.00 -
UNE-EN ISO 2063-1:2019
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019)
11/27/2019 - PDF - Spanish -
Learn More€82.00 -
UNE-EN ISO 2063-1:2019
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019)
11/27/2019 - PDF - English -
Learn More€98.40 -
19/30406414 DC:2019
BS EN 2302. Aerospace series. Heat resisting nickel base alloy Ni-Cr20Co3Fe3. Rm = 650 MPa. Sheets and strips, cold rolled. 0,25 mm < a = 3 mm
11/21/2019 - PDF - English -
Learn More€24.00 -
19/30406273 DC:2019
BS EN 3774-006. Aerospace series. Circuit breakers, three-poles, temperature compensated, rated currents 1 A to 25 Part 006. 6,35 blade terminal. Product standard
11/20/2019 - PDF - English -
Learn More€24.00 -
19/30406216 DC:2019
BS EN 4641-102. Aerospace series. Cables, optical 125 µm outside diameter cladding Part 102. Semi-loose 62,5/125 GI fibre nominal 1,8 mm diameter. Product standard
11/19/2019 - PDF - English -
Learn More€24.00 -
19/30405712 DC:2019
BS EN 2713-012. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between – 55 °C 200 Part 012. MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cables family. Silver plated copper screened (spiral) jacketed, UV laser printable. Product standard
11/11/2019 - PDF - English -
Learn More€24.00 -
19/30405560 DC:2019
BS EN 3375-008. Aerospace series. Cable, electrical, for digital data transmission Part 008. Single braid. Star Quad 100 ohms. Type KD. Product standard
11/8/2019 - PDF - English -
Learn More€24.00 -
19/30405287 DC:2019
BS EN 4840-002. Aerospace series. Heat shrinkable moulded shapes Part 002. Index of product standards and dimensions
11/5/2019 - PDF - English -
Learn More€24.00 -
19/30405288 DC:2019
BS EN 4530-004. Aerospace series. Sealing sleeves used in elements of connection Part 004. for external diameter cable 3 mm to 4,1 mm. Product standard
10/31/2019 - PDF - English -
Learn More€24.00 -
19/30405286 DC:2019
BS EN 4530-002. Aerospace series. Sealing sleeves used in elements of connection Part 002. List and utilization sealing
10/31/2019 - PDF - English -
Learn More€24.00 -
UNE-EN 16845-1:2019
Photocatalysis - Anti-soiling chemical activity using adsorbed organics under solid/solid conditions - Part 1: Dyes on porous surfaces
10/30/2019 - PDF - English -
Learn More€88.80 -
UNE-EN 16845-1:2019
Photocatalysis - Anti-soiling chemical activity using adsorbed organics under solid/solid conditions - Part 1: Dyes on porous surfaces
10/30/2019 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 6581:2019
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2018)
10/2/2019 - PDF - Spanish -
Learn More€52.00 -
UNE-EN ISO 8994:2019
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2018)
10/2/2019 - PDF - English -
Learn More€63.60 -
UNE-EN ISO 3211:2019
Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018)
10/2/2019 - PDF - Spanish -
Learn More€58.00 -
UNE-EN ISO 8251:2019
Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018)
10/2/2019 - PDF - English -
Learn More€98.40 -
UNE-EN ISO 2085:2019
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
10/2/2019 - PDF - Spanish -
Learn More€49.00 -
UNE-EN ISO 6581:2019
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2018)
10/2/2019 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 3211:2019
Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018)
10/2/2019 - PDF - English -
Learn More€69.60 -
UNE-EN ISO 8994:2019
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2018)
10/2/2019 - PDF - Spanish -
Learn More€53.00 -
UNE-EN ISO 2085:2019
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
10/2/2019 - PDF - English -
Learn More€58.80 -
UNE-EN ISO 8251:2019
Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018)
10/2/2019 - PDF - Spanish -
Learn More€82.00 -
19/30400558 DC:2019
BS EN 4876. Aerospace series. Environmental testing. Durability of the displays by general usage
7/25/2019 - PDF - English -
Learn More€24.00 -
UNE-EN 13507:2019
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
7/24/2019 - PDF - English -
Learn More€69.60 -
UNE-EN 13507:2019
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
7/24/2019 - PDF - Spanish -
Learn More€58.00 -
19/30398558 DC:2019
BS EN 4179. Aerospace series. Qualification and approval of personnel for non- destructive testing
7/1/2019 - PDF - English -
Learn More€24.00 -
DIN EN ISO 2376:2019-07
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019), German version EN ISO 2376:2019
7/1/2019 - PDF - German -
Learn More€45.98 -
DIN EN ISO 2063-1:2019-07
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019), German version EN ISO 2063-1:2019
7/1/2019 - PDF - German -
Learn More€110.00 -
€25.00
-
19/30397675 DC:2019
BS EN 4165-003. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Part 003. Modules series 2 and Product standard
6/13/2019 - PDF - English -
Learn More€24.00 -
19/30397677 DC:2019
BS EN 4165-004. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Part 004. Stackable mounting receptacle 2 and modules, series Product standard
6/13/2019 - PDF - English -
Learn More€24.00 -
19/30397674 DC:2019
BS EN 4165-002. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Part 002. Specification of performance and contact arrangements
6/13/2019 - PDF - English -
Learn More€24.00 -
19/30397679 DC:2019
BS EN 4165-014. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Part 014. Shielded accessory body, 2 and 4 modules for connectors, series 3. Product standard
6/13/2019 - PDF - English -
Learn More€24.00 -
NBN EN ISO 2376:2019
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)
5/23/2019 - PDF - English -
Learn More€37.00 -
NBN EN ISO 2376:2019
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)
5/23/2019 - PDF - French -
Learn More€37.00 -
NBN EN ISO 2376:2019
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)
5/23/2019 - PDF - German -
Learn More€37.00 -
€25.00
-
UNE-EN 17002:2019
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification
5/8/2019 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 17001:2019
Thermal spraying - Components with thermally sprayed coatings - Coating specification
5/8/2019 - PDF - Spanish -
Learn More€53.00 -
UNE-EN ISO 8993:2019
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2018)
5/8/2019 - PDF - English -
Learn More€81.60 -
UNE-EN 17002:2019
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification
5/8/2019 - PDF - English -
Learn More€72.00 -
UNE-EN 17001:2019
Thermal spraying - Components with thermally sprayed coatings - Coating specification
5/8/2019 - PDF - English -
Learn More€63.60 -
UNE-EN ISO 8993:2019
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2018)
5/8/2019 - PDF - Spanish -
Learn More€68.00 -
DIN EN 17120:2019-05
Photocatalysis - Water purification - Performance of photocatalytic materials by measurement of phenol degradation, German version EN 17120:2019
5/1/2019 - PDF - German -
Learn More€59.63 -
19/30395307 DC:2019
BS EN 4884. Aerospace series. Steel X3CrNiMoAl 13-8-2. Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D = 200 mm. 1 200 MPa = Rm = 1 350 MPa
4/30/2019 - PDF - English -
Learn More€24.00 -
19/30395276 DC:2019
BS EN 4883. Aerospace series. Steel X5CrNiCu 17-4 (1.4542). Air melted. Solution treated and precipitation treated. Plates. 6 = a = 100 mm. Rm = 1 070 MPa
4/29/2019 - PDF - English -
Learn More€24.00 -
19/30395270 DC:2019
BS EN 4627. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De = 200 mm. 1 150 MPa = Rm = 1 300 MPa
4/24/2019 - PDF - English -
Learn More€24.00 -
19/30395271 DC:2019
BS EN 4628. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De = 200 mm. 1 150 MPa = Rm = 1 300 MPa
4/24/2019 - PDF - English -
Learn More€24.00 -
BS EN ISO 2376:2019
Anodizing of aluminium and its alloys. Determination of breakdown voltage and withstand voltage
4/24/2019 - PDF - English -
Learn More€151.00 -
19/30395273 DC:2019
BS EN 4630. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De = 200 mm. 900 MPa = Rm = 1 050 MPa
4/24/2019 - PDF - English -
Learn More€24.00 -
19/30395274 DC:2019
BS EN 4631. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De = 200 mm. 1 150 MPa = Rm = 1 300 MPa
4/24/2019 - PDF - English -
Learn More€24.00 -
19/30395275 DC:2019
BS EN 4882. Aerospace series. Steel X5CrNiCu 17-4 (1.4542). Air melted. Solution treated and precipitation treated. Sheets and strips. a = 6 mm. Rm = 1070 MPa
4/24/2019 - PDF - English -
Learn More€24.00 -
NBN EN ISO 2063-1:2019
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019)
4/17/2019 - PDF - German -
Learn More€142.00 -
NBN EN ISO 2063-1:2019
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019)
4/17/2019 - PDF - English -
Learn More€142.00 -
NBN EN ISO 2063-1:2019
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019)
4/17/2019 - PDF - French -
Learn More€142.00 -
DIN EN ISO 10111:2019-04
Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019), German version EN ISO 10111:2019
4/1/2019 - PDF - German -
Learn More€72.80 -
NF EN ISO 2376, A91-483 (04/2019)
Anodizing of aluminium and its alloys - Determination of electric breakdown voltage and withsand voltage - Anodisation de l'aluminium et de ses alliages - Détermination de la tension électrique de claquage
4/1/2019 - Paper - French -
Learn More€34.67 -
BS EN ISO 2063-1:2019
Thermal spraying. Zinc, aluminium and their alloys Design considerations quality requirements for corrosion protection systems
3/27/2019 - PDF - English -
Learn More€293.00 -
NBN EN 17120:2019
Photocatalysis - Water purification - Performance of photocatalytic materials by measurement of phenol degradation
3/26/2019 - PDF - German -
Learn More€58.00 -
NBN EN 17120:2019
Photocatalysis - Water purification - Performance of photocatalytic materials by measurement of phenol degradation
3/26/2019 - PDF - English -
Learn More€58.00 -
NBN EN 17120:2019
Photocatalysis - Water purification - Performance of photocatalytic materials by measurement of phenol degradation
3/26/2019 - PDF - French -
Learn More€58.00 -
19/30393671 DC:2019
BS EN 3645-002. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous Part 002. Specification of performance and contact arrangements
3/21/2019 - PDF - English -
Learn More€24.00 -
19/30393672 DC:2019
BS EN 3646-001.Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 continuous Part 001. Technical specification
3/21/2019 - PDF - English -
Learn More€24.00 -
19/30393677 DC:2019
BS EN 3646-002. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 continuous Part 002. Specification of performance and contact arrangements
3/21/2019 - PDF - English -
Learn More€24.00 -
19/30393614 DC:2019
BS EN 4868. Aerospace series. Anodic electrodeposition of hexavalent chromium free primer
3/20/2019 - PDF - English -
Learn More€24.00 -
19/30393020 DC:2019
BS EN 3475-705. Aerospace series. Cables, electrical, aircraft use. Test methods Part 705. Contrast measurement
3/8/2019 - PDF - English -
Learn More€24.00 -
ISO 2376:2019
Anodizing of aluminium and its alloys
Determination of breakdown voltage and withstand voltage
3/6/2019 - Paper - English -
Learn More€48.00 -
ISO 2376:2019
Anodizing of aluminium and its alloys
Determination of breakdown voltage and withstand voltage
3/6/2019 - Paper - French -
Learn More€48.00 -
BS EN 17120:2019
Photocatalysis. Water purification. Performance of photocatalytic materials by measurement of phenol degradation
3/4/2019 - PDF - English -
Learn More€180.00 -
NF EN ISO 2063-1, A91-201-1 (03/2019)
Thermal spraying - Zinc, aluminium and their alloys - Part 1 : design considerations and quality requirements for corrosion protection systems
3/1/2019 - Paper - French -
Learn More€99.33 -
DIN EN ISO 3211:2019-03
Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018), German version EN ISO 3211:2018
3/1/2019 - PDF - German -
Learn More€59.63 -
DIN EN ISO 8994:2019-03
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2018), German version EN ISO 8994:2018
3/1/2019 - PDF - German -
Learn More€52.90 -
NBN EN ISO 10111:2019
Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019)
2/27/2019 - PDF - English -
Learn More€58.00 -
NBN EN ISO 10111:2019
Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019)
2/27/2019 - PDF - French -
Learn More€58.00 -
UNE-EN 1395-5:2019
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
2/27/2019 - PDF - Spanish -
Learn More€60.00 -
NBN EN ISO 10111:2019
Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019)
2/27/2019 - PDF - German -
Learn More€58.00 -
UNE-EN 1395-5:2019
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
2/27/2019 - PDF - English -
Learn More€72.00 -
€174.00
-
€174.00
-
19/30371190 DC:2019
BS ISO 23052. Anodizing of aluminium and its alloy. Test methods of chemical resistance of anodic oxidation coatings on aluminium and its alloys using electromotive force apparatus
2/13/2019 - PDF - English -
Learn More€24.00 -
BS EN ISO 10111:2019
Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods
2/12/2019 - PDF - English -
Learn More€180.00 -
19/30391410 DC:2019
BS EN 4708-203. Aerospace series. Sleeves, heat-shrinkable, for binding, insulation and identification Part 203. Polyvinylidene fluoride (PVDF). Identification sleeves. Operating Temperature range -55°C to 225°C. Product Standard
2/12/2019 - PDF - English -
Learn More€24.00 -
19/30391326 DC:2019
BS EN 4708-201. Sleeves, heat-shrinkable, for binding, insulation and identification Part 201. Polyolefin sleeves. Operating Temperature range -55°C to 135°C. Product standard
2/10/2019 - PDF - English -
Learn More€24.00 -
19/30391266 DC:2019
BS EN 3197. Aerospace series. Design and installation of aircraft electrical and optical interconnection systems
2/7/2019 - PDF - English -
Learn More€43.00 -
19/30391019 DC:2019
BS EN 2854-002. Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm2. Operating temperatures between -55°C 260°C Part 002. General
2/7/2019 - PDF - English -
Learn More€24.00 -
ISO 18771:2019
Anodizing of aluminium and its alloys
Method to test the surface abrasion resistance using glass-coated abrasive paper
2/5/2019 - Paper - English -
Learn More€72.00 -
NF EN ISO 10111, A91-125 (02/2019)
Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
2/1/2019 - Paper - French -
Learn More€60.67 -
NBN EN ISO 3211:2019
Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018)
1/30/2019 - PDF - French -
Learn More€37.00 -
NBN EN ISO 8994:2019
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2018)
1/30/2019 - PDF - English -
Learn More€37.00 -
NBN EN ISO 8994:2019
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2018)
1/30/2019 - PDF - French -
Learn More€37.00 -
NBN EN ISO 3211:2019
Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018)
1/30/2019 - PDF - German -
Learn More€37.00 -
NBN EN ISO 8994:2019
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2018)
1/30/2019 - PDF - German -
Learn More€37.00 -
NBN EN ISO 3211:2019
Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018)
1/30/2019 - PDF - English -
Learn More€37.00 -
UNE-EN ISO 14918:2019
Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018)
1/16/2019 - PDF - English -
Learn More€88.80 -
UNE-EN ISO 14918:2019
Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018)
1/16/2019 - PDF - Spanish -
Learn More€74.00 -
ISO 10111:2019
Metallic and other inorganic coatings
Measurement of mass per unit area
1/10/2019 - Paper - English -
Learn More€72.00 -
ISO 10111:2019
Metallic and other inorganic coatings
Measurement of mass per unit area
1/10/2019 - Paper - French -
Learn More€72.00 -
BS EN ISO 3211:2018
Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation
1/4/2019 - PDF - English -
Learn More€151.00 -
18/30389354 DC:2018
BS EN 4881. Aerospace series. Micro-arc oxidation of aluminum and aluminum alloys
12/20/2018 - PDF - English -
Learn More€24.00 -
18/30389371 DC:2018
BS EN 2235. Aerospace series. Single and multicore electrical cables, screened and jacketed. Technical specification
12/20/2018 - PDF - English -
Learn More€24.00 -
BS EN ISO 8994:2018
Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Grid method
12/19/2018 - PDF - English -
Learn More€151.00 -
DIN EN ISO 8251:2018-12
Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018), German version EN ISO 8251:2018
12/1/2018 - PDF - German -
Learn More€110.00 -
DIN EN ISO 2085:2018-12
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
12/1/2018 - PDF - English -
Learn More€49.16 -
DIN EN ISO 6581:2018-12
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2018), German version EN ISO 6581:2018
12/1/2018 - PDF - German -
Learn More€45.98 -
DIN EN ISO 6581:2018-12
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2018)
12/1/2018 - PDF - English -
Learn More€57.57 -
DIN EN ISO 8993:2018-12
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2018), German version EN ISO 8993:2018
12/1/2018 - PDF - German -
Learn More€72.80 -
NF EN ISO 3211, A91-486 (12/2018)
Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation
12/1/2018 - Paper - French -
Learn More€46.55 -
DIN EN ISO 2085:2018-12
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018), German version EN ISO 2085:2018
12/1/2018 - PDF - German -
Learn More€39.35 -
NF EN ISO 8994, A91-493 (12/2018)
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method
12/1/2018 - Paper - French -
Learn More€48.00 -
ISO 3211:2018
Anodizing of aluminium and its alloys
Assessment of resistance of anodic oxidation coatings to cracking by deformation
11/28/2018 - Paper - French -
Learn More€48.00 -
ISO 3211:2018
Anodizing of aluminium and its alloys
Assessment of resistance of anodic oxidation coatings to cracking by deformation
11/28/2018 - Paper - English -
Learn More€48.00 -
NBN EN ISO 8993:2018
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2018)
11/27/2018 - PDF - French -
Learn More€58.00 -
NBN EN ISO 8993:2018
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2018)
11/27/2018 - PDF - German -
Learn More€58.00 -
NBN EN ISO 8993:2018
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2018)
11/27/2018 - PDF - English -
Learn More€58.00 -
UNE-EN ISO 17836:2018
Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)
11/21/2018 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 17836:2018
Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)
11/21/2018 - PDF - Spanish -
Learn More€60.00 -
ISO 8994:2018
Anodizing of aluminium and its alloys
Rating system for the evaluation of pitting corrosion
11/12/2018 - Paper - French -
Learn More€48.00 -
ISO 8994:2018
Anodizing of aluminium and its alloys
Rating system for the evaluation of pitting corrosion
11/12/2018 - Paper - English -
Learn More€48.00 -
BS EN ISO 8993:2018
Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method
10/31/2018 - PDF - English -
Learn More€180.00 -
NBN EN ISO 8251:2018
Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018)
10/30/2018 - PDF - German -
Learn More€142.00 -
NBN EN ISO 2085:2018
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
10/30/2018 - PDF - English -
Learn More€37.00 -
NBN EN ISO 6581:2018
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2018)
10/30/2018 - PDF - German -
Learn More€37.00 -
NBN EN ISO 2085:2018
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
10/30/2018 - PDF - French -
Learn More€37.00 -
NBN EN ISO 8251:2018
Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018)
10/30/2018 - PDF - English -
Learn More€142.00 -
NBN EN ISO 8251:2018
Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018)
10/30/2018 - PDF - French -
Learn More€142.00 -
NBN EN ISO 6581:2018
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2018)
10/30/2018 - PDF - English -
Learn More€37.00 -
NBN EN ISO 2085:2018
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
10/30/2018 - PDF - German -
Learn More€37.00 -
NBN EN ISO 6581:2018
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2018)
10/30/2018 - PDF - French -
Learn More€37.00 -
BS EN ISO 14921:2010
Thermal spraying. Procedures for the application of thermally sprayed coatings for engineering components
10/24/2018 - PDF - English -
Learn More€180.00 -
BS EN ISO 14924:2005
Thermal spraying. Post-treatment and finishing of thermally sprayed coatings
10/24/2018 - PDF - English -
Learn More€250.00 -
€250.00
-
18/30384604 DC:2018
BS EN 4718. Aerospace series. Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) stock shape material. Material specification
10/16/2018 - PDF - English -
Learn More€24.00 -
18/30384546 DC:2018
BS EN 4717. Aerospace series. Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) stock shape material. Material specification
10/16/2018 - PDF - English -
Learn More€24.00 -
BS EN ISO 6581:2018
Anodizing of aluminium and its alloys. Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
10/8/2018 - PDF - English -
Learn More€151.00 -
BS EN ISO 2085:2018
Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
10/5/2018 - PDF - English -
Learn More€151.00 -
18/30384143 DC:2018
BS EN 3155-002. Aerospace series. Electrical contacts used in elements of connection Part 002. List and utilization
10/3/2018 - PDF - English -
Learn More€24.00 -
DIN EN 17001:2018-10
Thermal spraying - Components with thermally sprayed coatings - Coating specification
10/1/2018 - PDF - English -
Learn More€66.07 -
€204.86
-
DIN EN 17059:2018-10
Plating and anodizing lines - Safety requirements, German version EN 17059:2018
10/1/2018 - PDF - German -
Learn More€163.74 -
DIN EN 17002:2018-10
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification
10/1/2018 - PDF - English -
Learn More€74.58 -
DIN EN 1395-5:2018-10
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers, German version EN 1395-5:2018
10/1/2018 - PDF - German -
Learn More€65.89 -
DIN EN 17001:2018-10
Thermal spraying - Components with thermally sprayed coatings - Coating specification, German version EN 17001:2018
10/1/2018 - PDF - German -
Learn More€52.90 -
€51.00
-
NF EN ISO 8993, A91-492 (10/2018)
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method
10/1/2018 - Paper - French -
Learn More€73.00 -
DIN EN 13507:2018-10
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
10/1/2018 - PDF - English -
Learn More€66.07 -
DIN EN 13507:2018-10
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying, German version EN 13507:2018
10/1/2018 - PDF - German -
Learn More€52.90 -
DIN EN 1395-5:2018-10
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
10/1/2018 - PDF - English -
Learn More€82.52 -
DIN EN 17002:2018-10
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification, German version EN 17002:2018
10/1/2018 - PDF - German -
Learn More€59.63 -
€61.00
-
BS EN ISO 8251:2018
Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
9/20/2018 - PDF - English -
Learn More€293.00 -
NBN EN 17002:2018
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification
9/19/2018 - PDF - English -
Learn More€58.00 -
NBN EN 13507:2018
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
9/19/2018 - PDF - English -
Learn More€58.00