25.220 : Surface treatment and coating
-
20/30410756 DC:2020
BS EN 4860. Aerospace series. Environmental testing. Test Xb: Abrasion of markings, letterings, surfaces and materials caused by rubbing of fingertips and hands
1/16/2020 - PDF - English - BSI
Learn More€24.00 -
NF EN 4707, L10-313 (01/2020)
Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium
1/1/2020 - Paper - English, French - AFNOR
Learn More€68.50 -
NF EN ISO 2106, A91-480 (01/2020)
Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method - Anodisation de l'aluminium et de ses alliages - Détermination de la masse par unité de surface (masse surfacique) des couches d'oxydation anodique - Méthode gravimétrique
1/1/2020 - Paper - French - AFNOR
Learn More€48.00 -
NF EN ISO 14713-2, A91-130-2 (01/2020)
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2 : hot dip galvanizing
1/1/2020 - Paper - French - AFNOR
Learn More€86.50 -
DIN EN ISO 28721-1:2020-01
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories (ISO 28721-1:2019), German version EN ISO 28721-1:2019
1/1/2020 - PDF - German - DIN
Learn More€85.79 -
DIN EN 14901-1:2020-01
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty), German version EN 14901-1:2014+A1:2019
1/1/2020 - PDF - German - DIN
Learn More€79.72 -
19/30408756 DC:2019
BS EN 4890. Aerospace series. Steel X4CrNiMo16-5-1. Air melted. Hardened and tempered. Sheets and plates. 0,6 mm = a = 50 mm. 900 MPa = Rm = 1 050 MPa
12/20/2019 - PDF - English - BSI
Learn More€24.00 -
NBN EN ISO 8504-1:2019
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2019)
12/19/2019 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 8504-1:2019
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2019)
12/19/2019 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 8504-1:2019
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2019)
12/19/2019 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 8504-2:2019
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2019)
12/19/2019 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 8504-2:2019
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2019)
12/19/2019 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 8504-2:2019
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2019)
12/19/2019 - PDF - English - NBN
Learn More€58.00 -
NBN EN 14901-1:2014+A1:2019
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
12/19/2019 - PDF - French - NBN
Learn More€89.00 -
NBN EN 14901-1:2014+A1:2019
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
12/19/2019 - PDF - German - NBN
Learn More€89.00 -
NBN EN 14901-1:2014+A1:2019
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
12/19/2019 - PDF - English - NBN
Learn More€89.00 -
NBN EN 14901-2:2019
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
12/19/2019 - PDF - French - NBN
Learn More€89.00 -
NBN EN 14901-2:2019
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
12/19/2019 - PDF - German - NBN
Learn More€89.00 -
NBN EN 14901-2:2019
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
12/19/2019 - PDF - English - NBN
Learn More€89.00 -
BS EN ISO 8504-1:2019
Preparation of steel substrates before application paints and related products. Surface preparation methods General principles
12/10/2019 - PDF - English - BSI
Learn More€151.00 -
BS EN 14901-2:2019
Ductile iron pipes, fittings and accessories. Requirements test methods for organic coatings of ductile accessories Thermoplastic acid modified polyolefin coating (TMPO)
12/10/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 8504-2:2019
Preparation of steel substrates before application paints and related products. Surface preparation methods Abrasive blast-cleaning
12/5/2019 - PDF - English - BSI
Learn More€180.00 -
UNE-EN ISO 2376:2019
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)
12/4/2019 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 2376:2019
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)
12/4/2019 - PDF - English - AENOR
Learn More€63.60 -
DIN EN ISO 28763:2019-12
Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications (ISO 28763:2019), German version EN ISO 28763:2019
12/1/2019 - PDF - German - DIN
Learn More€72.80 -
DIN EN 13523-11:2019-12
Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test), German version EN 13523-11:2019
12/1/2019 - PDF - German - DIN
Learn More€45.98 -
DIN EN 13523-17:2019-12
Coil coated metals - Test methods - Part 17: Adhesion of strippable films, German version EN 13523-17:2019
12/1/2019 - PDF - German - DIN
Learn More€52.90 -
DIN EN 13523-19:2019-12
Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing, German version EN 13523-19:2019
12/1/2019 - PDF - German - DIN
Learn More€72.80 -
ASTM D2134-19(2024)
Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
12/1/2019 - PDF - English - ASTM
Learn More€52.00 -
ASTM D2134-19(2024) + Redline
Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
12/1/2019 - PDF - English - ASTM
Learn More€63.00 -
19/30406770 DC:2019
BS EN 2995-006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 Part 006. 6,3 mm & 2,8mm blade terminal. With polarized signal contact. Product standard
11/28/2019 - PDF - English - BSI
Learn More€24.00 -
NBN EN ISO 21968:2019
Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)
11/28/2019 - PDF - French - NBN
Learn More€163.00 -
NBN EN ISO 21968:2019
Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)
11/28/2019 - PDF - German - NBN
Learn More€163.00 -
NBN EN ISO 21968:2019
Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)
11/28/2019 - PDF - English - NBN
Learn More€163.00 -
NBN EN ISO 28721-1:2019
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories (ISO 28721-1:2019)
11/28/2019 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 28721-1:2019
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories (ISO 28721-1:2019)
11/28/2019 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 28721-1:2019
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories (ISO 28721-1:2019)
11/28/2019 - PDF - English - NBN
Learn More€89.00 -
UNE-EN ISO 2063-1:2019
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019)
11/27/2019 - PDF - Spanish - AENOR
Learn More€82.00 -
UNE-EN ISO 2063-1:2019
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019)
11/27/2019 - PDF - English - AENOR
Learn More€98.40 -
BS EN 14901-1:2014+A1:2019
Ductile iron pipes, fittings and accessories. Requirements test methods for organic coatings of ductile accessories Epoxy coating (heavy duty)
11/27/2019 - PDF - English - BSI
Learn More€180.00 -
19/30406414 DC:2019
BS EN 2302. Aerospace series. Heat resisting nickel base alloy Ni-Cr20Co3Fe3. Rm = 650 MPa. Sheets and strips, cold rolled. 0,25 mm < a = 3 mm
11/21/2019 - PDF - English - BSI
Learn More€24.00 -
19/30406273 DC:2019
BS EN 3774-006. Aerospace series. Circuit breakers, three-poles, temperature compensated, rated currents 1 A to 25 Part 006. 6,35 blade terminal. Product standard
11/20/2019 - PDF - English - BSI
Learn More€24.00 -
19/30406216 DC:2019
BS EN 4641-102. Aerospace series. Cables, optical 125 µm outside diameter cladding Part 102. Semi-loose 62,5/125 GI fibre nominal 1,8 mm diameter. Product standard
11/19/2019 - PDF - English - BSI
Learn More€24.00 -
19/30405712 DC:2019
BS EN 2713-012. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between – 55 °C 200 Part 012. MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cables family. Silver plated copper screened (spiral) jacketed, UV laser printable. Product standard
11/11/2019 - PDF - English - BSI
Learn More€24.00 -
BS ISO 21874:2019
PVD multi-layer hard coatings. Composition, structure and properties
11/11/2019 - PDF - English - BSI
Learn More€180.00 -
19/30405560 DC:2019
BS EN 3375-008. Aerospace series. Cable, electrical, for digital data transmission Part 008. Single braid. Star Quad 100 ohms. Type KD. Product standard
11/8/2019 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 28721-1:2019
Vitreous and porcelain enamels. Glass-lined apparatus for process plants Quality requirements apparatus, components, appliances accessories
11/8/2019 - PDF - English - BSI
Learn More€250.00 -
19/30405287 DC:2019
BS EN 4840-002. Aerospace series. Heat shrinkable moulded shapes Part 002. Index of product standards and dimensions
11/5/2019 - PDF - English - BSI
Learn More€24.00 -
ASTM B825-19
Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
11/1/2019 - PDF - English - ASTM
Learn More€54.00 -
ASTM B825-19 + Redline
Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
11/1/2019 - PDF - English - ASTM
Learn More€65.00 -
NF EN ISO 8504-2, T35-504-2 (11/2019)
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2 : abrasive blast-cleaning
11/1/2019 - Paper - French - AFNOR
Learn More€86.67 -
NF EN ISO 8504-1, T35-504-1 (11/2019)
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1 : general principles
11/1/2019 - Paper - French - AFNOR
Learn More€48.00 -
NF EN 14901-2, A48-001-2 (11/2019)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2 : thermoplastic acid modified polyolefin coating (TMPO) - Tuyaux, raccords et accessoires en fonte ductile - Prescriptions et méthodes d'essai relatives aux revêtements organiques des raccords et accessoires en fonte ductile - Partie 2 : revêtement thermoplastique en polyoléfine modifiée par un acide
11/1/2019 - Paper - French - AFNOR
Learn More€75.50 -
NF EN 14901-1+A1, A48-001-1 (11/2019)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1 : epoxy coating (heavy duty)
11/1/2019 - Paper - French - AFNOR
Learn More€75.67 -
NF EN 14901-1/IN1, A48-001-1/IN1 (11/2019)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1 : epoxy coating (heavy duty)
11/1/2019 - Paper - French - AFNOR
Learn More€23.00 -
€87.00
-
19/30405286 DC:2019
BS EN 4530-002. Aerospace series. Sealing sleeves used in elements of connection Part 002. List and utilization sealing
10/31/2019 - PDF - English - BSI
Learn More€24.00 -
19/30405288 DC:2019
BS EN 4530-004. Aerospace series. Sealing sleeves used in elements of connection Part 004. for external diameter cable 3 mm to 4,1 mm. Product standard
10/31/2019 - PDF - English - BSI
Learn More€24.00 -
UNE-EN 16845-1:2019
Photocatalysis - Anti-soiling chemical activity using adsorbed organics under solid/solid conditions - Part 1: Dyes on porous surfaces
10/30/2019 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 16845-1:2019
Photocatalysis - Anti-soiling chemical activity using adsorbed organics under solid/solid conditions - Part 1: Dyes on porous surfaces
10/30/2019 - PDF - English - AENOR
Learn More€88.80 -
BS EN ISO 21968:2019
Non-magnetic metallic coatings on metallic and non- metallic basis materials. Measurement of coating thickness. Phase-sensitive eddy-current method
10/28/2019 - PDF - English - BSI
Learn More€331.00 -
NBN EN ISO 28763:2019
Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications (ISO 28763:2019)
10/23/2019 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 28763:2019
Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications (ISO 28763:2019)
10/23/2019 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 28763:2019
Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications (ISO 28763:2019)
10/23/2019 - PDF - English - NBN
Learn More€58.00 -
NBN EN 13523-19:2019
Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing
10/23/2019 - PDF - French - NBN
Learn More€89.00 -
NBN EN 13523-19:2019
Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing
10/23/2019 - PDF - German - NBN
Learn More€89.00 -
NBN EN 13523-19:2019
Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing
10/23/2019 - PDF - English - NBN
Learn More€89.00 -
NBN EN 13523-17:2019
Coil coated metals - Test methods - Part 17: Adhesion of strippable films
10/23/2019 - PDF - French - NBN
Learn More€58.00 -
NBN EN 13523-17:2019
Coil coated metals - Test methods - Part 17: Adhesion of strippable films
10/23/2019 - PDF - German - NBN
Learn More€58.00 -
NBN EN 13523-17:2019
Coil coated metals - Test methods - Part 17: Adhesion of strippable films
10/23/2019 - PDF - English - NBN
Learn More€58.00 -
NBN EN 13523-11:2019
Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)
10/23/2019 - PDF - French - NBN
Learn More€58.00 -
NBN EN 13523-11:2019
Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)
10/23/2019 - PDF - German - NBN
Learn More€58.00 -
NBN EN 13523-11:2019
Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)
10/23/2019 - PDF - English - NBN
Learn More€58.00 -
BS EN ISO 28763:2019
Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications
10/21/2019 - PDF - English - BSI
Learn More€180.00 -
UNE-EN ISO 11126-5:2019
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel slag (ISO 11126-5:2018)
10/16/2019 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 11126-5:2019
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel slag (ISO 11126-5:2018)
10/16/2019 - PDF - English - AENOR
Learn More€63.60 -
BS EN 13523-19:2019
Coil coated metals. Test methods Panel design and method of atmospheric exposure testing
10/4/2019 - PDF - English - BSI
Learn More€180.00 -
UNE-EN ISO 2085:2019
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
10/2/2019 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN ISO 2085:2019
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
10/2/2019 - PDF - English - AENOR
Learn More€58.80 -
UNE-EN ISO 3211:2019
Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018)
10/2/2019 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 3211:2019
Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018)
10/2/2019 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 6581:2019
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2018)
10/2/2019 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 6581:2019
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2018)
10/2/2019 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN ISO 8251:2019
Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018)
10/2/2019 - PDF - Spanish - AENOR
Learn More€82.00 -
UNE-EN ISO 8251:2019
Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018)
10/2/2019 - PDF - English - AENOR
Learn More€98.40 -
UNE-EN ISO 8994:2019
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2018)
10/2/2019 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 8994:2019
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2018)
10/2/2019 - PDF - English - AENOR
Learn More€63.60 -
NF EN ISO 12944-5, T34-555-5 (10/2019)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5 : protective paint systems
10/1/2019 - Paper - French - AFNOR
Learn More€86.50 -
ASTM F3401-19
Standard Test Method for Wax Binder Removal from Equestrian Synthetic Track Surfaces
10/1/2019 - PDF - English - ASTM
Learn More€51.00 -
ASTM F3401-19 + Redline
Standard Test Method for Wax Binder Removal from Equestrian Synthetic Track Surfaces
10/1/2019 - PDF - English - ASTM
Learn More€61.00 -
NF EN ISO 21968, A91-321 (10/2019)
Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
10/1/2019 - Paper - French - AFNOR
Learn More€86.67 -
NF EN ISO 28721-1, A91-320-1 (10/2019)
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1 : quality requirements for apparatus, components, appliances and accessories
10/1/2019 - Paper - French - AFNOR
Learn More€86.50 -
ASTM D4060-19
Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
10/1/2019 - PDF - English - ASTM
Learn More€51.00 -
ASTM D4060-19 + Redline
Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
10/1/2019 - PDF - English - ASTM
Learn More€61.00 -
BS EN 13523-17:2019
Coil coated metals. Test methods Adhesion of strippable films
9/26/2019 - PDF - English - BSI
Learn More€151.00 -
BS EN 13523-11:2019
Coil coated metals. Test methods Resistance to solvents (rubbing test)
9/25/2019 - PDF - English - BSI
Learn More€151.00 -
NF EN ISO 28763, A91-322 (09/2019)
Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications
9/1/2019 - Paper - French - AFNOR
Learn More€60.50 -
NF EN 13523-11, T37-001-11 (09/2019)
Coil coated metals - Test methods - Part 11 : resistance to solvents (rubbing test)
9/1/2019 - Paper - French - AFNOR
Learn More€34.67 -
NF EN 13523-17, T37-001-17 (09/2019)
Coil coated metals - Test methods - Part 17 : adhesion of strippable films
9/1/2019 - Paper - French - AFNOR
Learn More€48.00 -
NF EN 13523-19, T37-001-19 (09/2019)
Coil coated metals - Test methods - Part 19 : panel design and method of atmospheric exposure testing
9/1/2019 - Paper - French - AFNOR
Learn More€75.67 -
BS EN ISO 11125-2:2018
Preparation of steel substrates before application paints and related products. Test methods for metallic blast-cleaning abrasives Determination particle size distribution
8/22/2019 - PDF - English - BSI
Learn More€151.00 -
IEEE C57.12.32:2019
IEEE Standard for Submersible Equipment--Enclosure Integrity
8/7/2019 - PDF - English - IEEE
Learn More€55.00 -
IEEE C57.12.32:2019 Redline
IEEE Standard for Submersible Equipment--Enclosure Integrity
8/7/2019 - PDF - English - IEEE
Learn More€76.00 -
IEEE C57.12.32:2019
IEEE Standard for Submersible Equipment--Enclosure Integrity
8/7/2019 - Paper - English - IEEE
Learn More€91.00 -
NF EN 3837, L10-305 (08/2019)
Aerospace series - Paints and varnishes - Nature and method for surface preparation of test pieces in aluminium alloys
8/1/2019 - Paper - English, French - AFNOR
Learn More€68.50 -
DIN EN ISO 8289-2:2019-08
Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects - Part 2: Slurry test for profiled surfaces (ISO 8289-2:2019), German version EN ISO 8289-2:2019
8/1/2019 - PDF - German - DIN
Learn More€45.98 -
DIN EN ISO 11177:2019-08
Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2019), German version EN ISO 11177:2019
8/1/2019 - PDF - German - DIN
Learn More€59.63 -
19/30400558 DC:2019
BS EN 4876. Aerospace series. Environmental testing. Durability of the displays by general usage
7/25/2019 - PDF - English - BSI
Learn More€24.00 -
UNE-EN 13507:2019
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
7/24/2019 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN 13507:2019
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
7/24/2019 - PDF - English - AENOR
Learn More€69.60 -
SAE AMS 2477D:2019-07-24
Conversion Coating for Aluminum Alloys Low Electrical Resistance Coating
7/24/2019 - PDF - English - SAE
Learn More€75.00 -
PD ISO/TR 22770:2019
Preparation of steel substrates before application of paints and related products. Analytical colorimetry method to support visual assessment of surface preparation grades
7/23/2019 - PDF - English - BSI
Learn More€180.00 -
ASTM E1793-19
Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
7/1/2019 - PDF - English - ASTM
Learn More€46.00 -
ASTM E1793-19 + Redline
Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
7/1/2019 - PDF - English - ASTM
Learn More€53.00 -
19/30398558 DC:2019
BS EN 4179. Aerospace series. Qualification and approval of personnel for non- destructive testing
7/1/2019 - PDF - English - BSI
Learn More€24.00 -
DIN EN ISO 2376:2019-07
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019), German version EN ISO 2376:2019
7/1/2019 - PDF - German - DIN
Learn More€45.98 -
DIN EN ISO 2063-1:2019-07
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019), German version EN ISO 2063-1:2019
7/1/2019 - PDF - German - DIN
Learn More€110.00 -
NF A35-035 (07/2019)
Steel products - Hot-dip zinc or zinc-aluminium coated prestressing smooth wires and 7-wire strands
7/1/2019 - Paper - French - AFNOR
Learn More€75.67 -
€25.00
-
ASTM F1137/F1137M-19
Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
6/15/2019 - PDF - English - ASTM
Learn More€46.00 -
ASTM F1137/F1137M-19 + Redline
Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
6/15/2019 - PDF - English - ASTM
Learn More€53.00 -
19/30397674 DC:2019
BS EN 4165-002. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Part 002. Specification of performance and contact arrangements
6/13/2019 - PDF - English - BSI
Learn More€24.00 -
19/30397675 DC:2019
BS EN 4165-003. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Part 003. Modules series 2 and Product standard
6/13/2019 - PDF - English - BSI
Learn More€24.00 -
19/30397677 DC:2019
BS EN 4165-004. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Part 004. Stackable mounting receptacle 2 and modules, series Product standard
6/13/2019 - PDF - English - BSI
Learn More€24.00 -
19/30397679 DC:2019
BS EN 4165-014. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Part 014. Shielded accessory body, 2 and 4 modules for connectors, series 3. Product standard
6/13/2019 - PDF - English - BSI
Learn More€24.00 -
€93.00
-
UNE-EN ISO 11125-3:2019
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:2018)
6/5/2019 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 11125-3:2019
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:2018)
6/5/2019 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN ISO 11125-4:2019
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:2018)
6/5/2019 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 11125-4:2019
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:2018)
6/5/2019 - PDF - English - AENOR
Learn More€63.60 -
UNE-EN ISO 11125-5:2019
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:2018)
6/5/2019 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 11125-5:2019
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:2018)
6/5/2019 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN ISO 11125-6:2019
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:2018)
6/5/2019 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 11125-6:2019
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:2018)
6/5/2019 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN ISO 11126-1:2019
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:2018)
6/5/2019 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 11126-1:2019
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:2018)
6/5/2019 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 11126-3:2019
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:2018)
6/5/2019 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 11126-3:2019
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:2018)
6/5/2019 - PDF - English - AENOR
Learn More€63.60 -
UNE-EN ISO 11126-6:2019
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron and steel slags (ISO 11126-6:2018)
6/5/2019 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 11126-6:2019
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron and steel slags (ISO 11126-6:2018)
6/5/2019 - PDF - English - AENOR
Learn More€63.60 -
UNE-EN ISO 11126-7:2019
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:2018)
6/5/2019 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 11126-7:2019
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:2018)
6/5/2019 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN ISO 11126-8:2019
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine (ISO 11126-8:2018, Corrected version 2018-11)
6/5/2019 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 11126-8:2019
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine (ISO 11126-8:2018, Corrected version 2018-11)
6/5/2019 - PDF - English - AENOR
Learn More€63.60 -
UNE-EN ISO 11126-4:2019
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:2018)
6/5/2019 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 11126-4:2019
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:2018)
6/5/2019 - PDF - English - AENOR
Learn More€63.60 -
DIN 50957-2:2019-06
Testing of electrolytes used for electro-deposited metallic coatings - Test involving electro-deposition - Part 2: Special test cells
6/1/2019 - PDF - German - DIN
Learn More€85.79 -
UNE-EN ISO 11177:2019
Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2019) (Endorsed by Asociación Española de Normalización in June of 2019.)
6/1/2019 - PDF - English - AENOR
Learn More€62.00 -
ASTM D5402-19
Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
6/1/2019 - PDF - English - ASTM
Learn More€51.00 -
ASTM D5402-19 + Redline
Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
6/1/2019 - PDF - English - ASTM
Learn More€61.00 -
NBN EN ISO 2376:2019
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)
5/23/2019 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 2376:2019
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)
5/23/2019 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 2376:2019
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)
5/23/2019 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 8289-2:2019
Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects - Part 2: Slurry test for profiled surfaces (ISO 8289-2:2019)
5/23/2019 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 8289-2:2019
Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects - Part 2: Slurry test for profiled surfaces (ISO 8289-2:2019)
5/23/2019 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 8289-2:2019
Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects - Part 2: Slurry test for profiled surfaces (ISO 8289-2:2019)
5/23/2019 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 11177:2019
Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2019)
5/23/2019 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 11177:2019
Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2019)
5/23/2019 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 11177:2019
Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2019)
5/23/2019 - PDF - English - NBN
Learn More€37.00 -
UNE-EN ISO 11124-2:2019
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:2018, Corrected version 2018-12)
5/22/2019 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 11124-2:2019
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:2018, Corrected version 2018-12)
5/22/2019 - PDF - English - AENOR
Learn More€63.60 -
UNE-EN ISO 11124-4:2019
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:2018)
5/22/2019 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 11124-4:2019
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:2018)
5/22/2019 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 11125-2:2019
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:2018)
5/22/2019 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 11125-2:2019
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:2018)
5/22/2019 - PDF - English - AENOR
Learn More€68.40 -
€25.00
-
NACE SP0487-2019
Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection
5/8/2019 - PDF - English - NACE
Learn More€192.00 -
UNE-EN 17001:2019
Thermal spraying - Components with thermally sprayed coatings - Coating specification
5/8/2019 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN 17001:2019
Thermal spraying - Components with thermally sprayed coatings - Coating specification
5/8/2019 - PDF - English - AENOR
Learn More€63.60 -
UNE-EN 17002:2019
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification
5/8/2019 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 17002:2019
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification
5/8/2019 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 8993:2019
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2018)
5/8/2019 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 8993:2019
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2018)
5/8/2019 - PDF - English - AENOR
Learn More€81.60 -
SAE J 1173:2019-05-03
Ø SIZE CLASSIFICATION AND CHARACTERISTICS OF GLASS BEADS FOR PEENING
5/3/2019 - PDF - English - SAE
Learn More€79.00 -
BS EN ISO 8289-2:2019
Vitreous and porcelain enamels. Low-voltage test for detecting locating defects Slurry profiled surfaces
5/3/2019 - PDF - English - BSI
Learn More€151.00 -
BS EN ISO 11177:2019
Vitreous and porcelain enamels. Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply. Quality requirements and testing
5/3/2019 - PDF - English - BSI
Learn More€151.00 -
DIN EN 17120:2019-05
Photocatalysis - Water purification - Performance of photocatalytic materials by measurement of phenol degradation, German version EN 17120:2019
5/1/2019 - PDF - German - DIN
Learn More€59.63 -
NF D14-503 (05/2019)
Sanitary appliances - Resistance to thermal shock of enamelled surfaces - Test method
5/1/2019 - Paper - French - AFNOR
Learn More€25.50 -
NF D14-506 (05/2019)
Sanitary appliances - Resistance to acids at ambient temperature of enamelled surfaces - Conventional test method
5/1/2019 - Paper - French - AFNOR
Learn More€34.67 -
ASTM D7093-19
Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
5/1/2019 - PDF - English - ASTM
Learn More€46.00 -
ASTM D7093-19 + Redline
Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
5/1/2019 - PDF - English - ASTM
Learn More€53.00 -
19/30395307 DC:2019
BS EN 4884. Aerospace series. Steel X3CrNiMoAl 13-8-2. Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D = 200 mm. 1 200 MPa = Rm = 1 350 MPa
4/30/2019 - PDF - English - BSI
Learn More€24.00 -
UNE-EN ISO 10683:2019
Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018)
4/30/2019 - PDF - Spanish - AENOR
Learn More€85.00 -
UNE-EN ISO 10683:2019
Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018)
4/30/2019 - PDF - English - AENOR
Learn More€102.00 -
19/30395276 DC:2019
BS EN 4883. Aerospace series. Steel X5CrNiCu 17-4 (1.4542). Air melted. Solution treated and precipitation treated. Plates. 6 = a = 100 mm. Rm = 1 070 MPa
4/29/2019 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 2376:2019
Anodizing of aluminium and its alloys. Determination of breakdown voltage and withstand voltage
4/24/2019 - PDF - English - BSI
Learn More€151.00 -
19/30395270 DC:2019
BS EN 4627. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De = 200 mm. 1 150 MPa = Rm = 1 300 MPa
4/24/2019 - PDF - English - BSI
Learn More€24.00 -
19/30395273 DC:2019
BS EN 4630. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De = 200 mm. 900 MPa = Rm = 1 050 MPa
4/24/2019 - PDF - English - BSI
Learn More€24.00 -
19/30395275 DC:2019
BS EN 4882. Aerospace series. Steel X5CrNiCu 17-4 (1.4542). Air melted. Solution treated and precipitation treated. Sheets and strips. a = 6 mm. Rm = 1070 MPa
4/24/2019 - PDF - English - BSI
Learn More€24.00 -
19/30395274 DC:2019
BS EN 4631. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De = 200 mm. 1 150 MPa = Rm = 1 300 MPa
4/24/2019 - PDF - English - BSI
Learn More€24.00 -
19/30395271 DC:2019
BS EN 4628. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De = 200 mm. 1 150 MPa = Rm = 1 300 MPa
4/24/2019 - PDF - English - BSI
Learn More€24.00 -
NBN EN ISO 2063-1:2019
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019)
4/17/2019 - PDF - French - NBN
Learn More€142.00 -
NBN EN ISO 2063-1:2019
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019)
4/17/2019 - PDF - German - NBN
Learn More€142.00 -
NBN EN ISO 2063-1:2019
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019)
4/17/2019 - PDF - English - NBN
Learn More€142.00 -
BS EN ISO 15023-2:2019
Plastics. Poly(vinyl alcohol) (PVAL) materials Determination of properties
4/17/2019 - PDF - English - BSI
Learn More€250.00 -
DIN EN ISO 8504-3:2019-04
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:2018), German version EN ISO 8504-3:2018
4/1/2019 - PDF - German - DIN
Learn More€65.89 -
DIN 50940-1:2019-04
Determination of the inhibiting effect of pickling inhibitors - Part 1: Inhibition of the removal of ferrous materials
4/1/2019 - PDF - German - DIN
Learn More€65.89 -
NF EN ISO 2376, A91-483 (04/2019)
Anodizing of aluminium and its alloys - Determination of electric breakdown voltage and withsand voltage - Anodisation de l'aluminium et de ses alliages - Détermination de la tension électrique de claquage
4/1/2019 - Paper - French - AFNOR
Learn More€34.67 -
DIN EN ISO 10111:2019-04
Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019), German version EN ISO 10111:2019
4/1/2019 - PDF - German - DIN
Learn More€72.80 -
NF EN ISO 8289-2, A91-319-2 (04/2019)
Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects - Part 2 : slurry test for profile surfaces
4/1/2019 - Paper - French - AFNOR
Learn More€48.00