25.180 : Industrial furnaces
-
UNE-EN ISO 13577-2:2023
Industrial furnaces and associated processing equipment - Safety - Part 2: Combustion and fuel handling systems (ISO 13577-2:2023) (Endorsed by Asociación Española de Normalización in February of 2024.)
4/25/2024 - PDF - English -
Learn More€138.00 -
C79-600 (11/1956)
Industrial electrical heating. Ovens with resistors. Requirements.
11/1/1956 - Paper - French -
Learn More€72.00 -
BS 4309:1968
Methods of measuring the performance of laboratory electric resistance furnaces
10/25/1968 - PDF - English -
Learn More€151.00 -
NF B40-106 (01/1973)
Refractory products. Dimensions of stacking bricks for glass furnaces.
1/1/1973 - Paper - French -
Learn More€25.67 -
UTE C79-610, C79-610U (06/1979)
Industrial electrical heating. Electrical moulded resistances for industrial furnaces. Provisional requirements.
6/1/1979 - Paper - French -
Learn More€88.33 -
UTE C79-611, C79-611U (03/1980)
Industrial electrical heating. Practical guide of calculation of an industrial furnace electrically heated by resistances.
3/1/1980 - Paper - French -
Learn More€103.33 -
DIN 24201:1982-05
Industrial furnaces, heating and heat-treating furnaces, concepts
5/1/1982 - PDF - German -
Learn More€32.34 -
BS 6466:1984
Code of practice for design and installation of ceramic fibre furnace linings
8/31/1984 - PDF - English -
Learn More€331.00 -
DIN 30683-2:1984-12
Gas appliances; forced air gasburners with ventilation in bakeries
12/1/1984 - PDF - German -
Learn More€32.34 -
BS 4727-2:Group 10:1985
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering Industrial electroheating terminology
3/29/1985 - PDF - English -
Learn More€293.00 -
NF C79-620 (05/1985)
Industrial electroheating. Heaters with sheathed heating elements.
5/1/1985 - Paper - French -
Learn More€88.33 -
BS 6886:1987
Specification for alumino-silicate refractories for use in coke ovens
9/30/1987 - PDF - English -
Learn More€151.00 -
€151.00
-
IEC 60240-1:1992
IEC 60240-1:1992 Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters
7/31/1992 - PDF - English, French -
Learn More€46.00 -
BS EN 746-4:2000
Industrial thermoprocessing equipment Particular safety requirements for hot dip galvanizing
4/15/2000 - PDF - English -
Learn More€180.00 -
DIN EN 746-4:2000-05
Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment, German version EN 746-4:1999
5/1/2000 - PDF - German -
Learn More€52.90 -
NBN EN 746-4:2000
Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment
5/1/2000 - PDF - German -
Learn More€37.00 -
DIN EN 746-4:2000-05
Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment, English version of DIN EN 746-4
5/1/2000 - PDF - English -
Learn More€66.07 -
NBN EN 746-4:2000
Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment
5/1/2000 - PDF - English -
Learn More€37.00 -
NBN EN 746-4:2000
Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment
5/1/2000 - PDF - French -
Learn More€37.00 -
NF EN 746-4, E32-200-4 (07/2000)
Industrial thermoprocessing equipment - Part 4 : particular safety requirements for hot dip galvanising thermoprocessing equipment
7/1/2000 - Paper - French -
Learn More€86.50 -
BS EN 746-5:2000
Industrial thermoprocessing equipment Particular safety requirements for salt bath
11/15/2000 - PDF - English -
Learn More€250.00 -
BS EN 746-8:2000
Industrial thermoprocessing equipment Particular safety requirements for quenching
11/15/2000 - PDF - English -
Learn More€293.00 -
NBN EN 746-5:2000
Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment
11/22/2000 - PDF - German -
Learn More€37.00 -
NBN EN 746-8:2000
Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment
11/22/2000 - PDF - English -
Learn More€37.00 -
NBN EN 746-8:2000
Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment
11/22/2000 - PDF - French -
Learn More€37.00 -
NBN EN 746-5:2000
Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment
11/22/2000 - PDF - English -
Learn More€37.00 -
NBN EN 746-5:2000
Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment
11/22/2000 - PDF - French -
Learn More€37.00 -
NBN EN 746-8:2000
Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment
11/22/2000 - PDF - German -
Learn More€37.00 -
NF EN 746-5, E32-200-5 (12/2000)
Industrial thermoprocessing equipment - Part 5 : particular safety requirements for salt bath thermoprocessing equipment
12/1/2000 - Paper - French -
Learn More€99.00 -
NF EN 746-8, E32-200-8 (12/2000)
Industrial thermoprocessing equipment - Part 8 : particular safety requirements for quenching equipment
12/1/2000 - Paper - French -
Learn More€99.33 -
DIN EN 746-8:2001-04
Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment, English version of DIN EN 746-8
4/1/2001 - PDF - English -
Learn More€91.12 -
DIN EN 746-5:2001-04
Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment, English version of DIN EN 746-5
4/1/2001 - PDF - English -
Learn More€82.52 -
DIN EN 60216-4-2 VDE 0304-24-2:2001-04
Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens, Precision ovens for use up to 300 °C (IEC 60216-4-2:2000), German version EN 60216-4-2:2000
4/1/2001 - Paper - German -
Learn More€49.48 -
DIN EN 746-8:2001-04
Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment, German version EN 746-8:2000
4/1/2001 - PDF - German -
Learn More€72.80 -
DIN EN 60216-4-3 VDE 0304-24-3:2001-04
Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens, Multi-chamber ovens (IEC 60216-4-3:2000), German version EN 60216-4-3:2000
4/1/2001 - Paper - German -
Learn More€45.89 -
DIN EN 746-5:2001-04
Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment, German version EN 746-5:2000
4/1/2001 - PDF - German -
Learn More€65.89 -
IEC TR 62157:2001
IEC TR 62157:2001 Cylindrical machined carbon electrodes - Nominal dimensions
6/26/2001 - PDF - English -
Learn More€23.00 -
UNE-EN 746-8:2001
Industrial thermoprocessing equipment. Part 8: Particular safety requirements for quenching equipment.
6/28/2001 - PDF - Spanish -
Learn More€73.00 -
UNE-EN 746-5:2001
Industrial thermoprocessing equipment. Part 5: Particular safety requirements for salt bath thermoprocessing equipment.
6/28/2001 - PDF - Spanish -
Learn More€69.00 -
UNE-EN 746-8:2001
Industrial thermoprocessing equipment. Part 8: Particular safety requirements for quenching equipment.
6/28/2001 - PDF - English -
Learn More€87.60 -
UNE-EN 746-5:2001
Industrial thermoprocessing equipment. Part 5: Particular safety requirements for salt bath thermoprocessing equipment.
6/28/2001 - PDF - English -
Learn More€82.80 -
€151.00
-
BS IEC 60397:1994
Test methods for batch furnaces with metallic heating resistors
6/12/2002 - PDF - English -
Learn More€180.00 -
ASTM E1602-03(2017)
Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
1/1/2003 - PDF - English -
Learn More€51.00 -
ASTM E1602-03(2017) + Redline
Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
1/1/2003 - PDF - English -
Learn More€61.00 -
DIN EN 61922:2003-04
High-frequency induction heating installations - Test methods for the determination of power output of the generator (IEC 61922:2002); German version EN 61922:2002
4/1/2003 - PDF - German -
Learn More€72.80 -
BS EN 61922:2002
High-frequency induction heating installations. Test methods for the determination of power output of the generator
5/19/2003 - PDF - English -
Learn More€180.00 -
UNE-EN 61922:2003
High-frequency induction heating installations - Test methods for the determination of power output of the generator
10/31/2003 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 61922:2003
High-frequency induction heating installations - Test methods for the determination of power output of the generator
10/31/2003 - PDF - English -
Learn More€81.60 -
€46.02
-
IEC 60050-841:2004
IEC 60050-841:2004 International Electrotechnical Vocabulary (IEV) - Part 841: Industrial electroheat
9/15/2004 - PDF - English, French -
Learn More€489.00 -
IEC 60519-3:2005
IEC 60519-3:2005 Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations
2/17/2005 - PDF - English, French -
Learn More€132.00 -
IEC 60239:2005
IEC 60239:2005 Graphite electrodes for electric arc furnaces - Dimensions and designation
6/22/2005 - PDF - English, French -
Learn More€173.00 -
BS EN 60519-3:2005
Safety in electroheat installations Particular requirements for induction and conduction heating melting
10/21/2005 - PDF - English -
Learn More€180.00 -
UNE-EN 60519-3:2005
Safety in electroheat installations -- Part 3: Particular requirements for induction and conduction heating and induction melting installations
11/16/2005 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 60519-3:2005
Safety in electroheat installations -- Part 3: Particular requirements for induction and conduction heating and induction melting installations
11/16/2005 - PDF - English -
Learn More€81.60 -
DIN EN 60519-3 VDE 0721-3:2006-01
Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations (IEC 60519-3:2005), German version EN 60519-3:2005
1/1/2006 - Paper - German -
Learn More€53.63 -
UNE 21302-841:2006 (R2015)
International Electrotechnical Vocabulary (IEV) - Part 841: Industrial electroheat
1/4/2006 - PDF - Spanish -
Learn More€167.00 -
BS EN 60519-9:2005
Safety in electroheat installations Particular requirements for high-frequency dielectric heating
1/24/2006 - PDF - English -
Learn More€180.00 -
NF EN 60519-9, C79-639 (02/2006)
Safety in electroheat installations - Part 9 : particular requirements for high-frequency dielectric heating installations
2/1/2006 - Paper - French -
Learn More€88.33 -
BS EN 60239:2005
Graphite electrodes for electric arc furnaces. Dimensions and designation
2/24/2006 - PDF - English -
Learn More€250.00 -
DIN EN 60239:2006-03
Graphite electrodes for electric arc furnaces - Dimensions and designation (IEC 60239:2005); German version EN 60239:2005
3/1/2006 - PDF - German -
Learn More€92.62 -
DIN EN 60519-8 VDE 0721-8:2006-06
Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces (IEC 60519-8:2005); German version EN 60519-8:2005
6/1/2006 - Paper - German -
Learn More€45.89 -
DIN EN 60519-9 VDE 0721-9:2006-06
Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations (IEC 60519-9:2005); German version EN 60519-9:2005
6/1/2006 - Paper - German -
Learn More€49.48 -
DIN EN 60779 VDE 0721-1032:2006-07
Industrial electroheat equipment - Test methods for electroslag remelting furnaces (IEC 60779:2005); German version EN 60779:2005
7/1/2006 - Paper - German -
Learn More€61.54 -
BS EN 61308:2006
High-frequency dielectric heating installations. Test methods for the determination of power output
7/31/2006 - PDF - English -
Learn More€180.00 -
DIN EN 61308:2006-09
High-frequency dielectric heating installations - Test methods for the determination of power output (IEC 61308:2005); German version EN 61308:2006
9/1/2006 - PDF - German -
Learn More€79.72 -
UNE-EN 61308:2006
High-frequency dielectric heating installations - Test methods for the determination of power output (IEC 61308:2005)
9/27/2006 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 61308:2006
High-frequency dielectric heating installations - Test methods for the determination of power output (IEC 61308:2005)
9/27/2006 - PDF - English -
Learn More€81.60 -
DIN EN 60216-4-1 VDE 0304-4-1:2006-12
Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens (IEC 60216-4-1:2006); German version EN 60216-4-1:2006
12/1/2006 - Paper - German -
Learn More€61.54 -
BS EN 62076:2006
Industrial electroheating installations. Test methods for induction channel and induction crucible furnaces
12/29/2006 - PDF - English -
Learn More€180.00 -
UNE-EN 62076:2006
Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces (IEC 62076:2006). (Endorsed by AENOR in March of 2007.)
3/1/2007 - PDF - English -
Learn More€64.00 -
DIN EN 60519-2 VDE 0721-2:2007-05
Safety in electroheat installations - Part 2: Particular requirements for resistance heating equipment (IEC 60519-2:2006); German version EN 60519-2:2006
5/1/2007 - Paper - German -
Learn More€57.53 -
DIN EN 62076 VDE 0721-51:2007-05
Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces (IEC 62076:2006); German version EN 62076:2006
5/1/2007 - Paper - German -
Learn More€61.54 -
IEC 60519-11:2007
IEC 60519-11:2007 Safety in electroheat installations - Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals
6/22/2007 - PDF - English, French -
Learn More€92.00 -
BS EN 60519-11:2007
Safety in electroheat installations Particular requirements for using the effect of electromagnetic forces on liquid metals
10/31/2007 - PDF - English -
Learn More€180.00 -
NF EN 60519-11, C79-641 (11/2007)
Safety in electroheat installations - Part 11 : particular requirements for installations using the effect of electromagnetic forces on liquid metals
11/1/2007 - Paper - French -
Learn More€88.00 -
DIN EN 60239 Berichtigung 1:2007-11
Graphite electrodes for electric arc furnaces - Dimensions and designation (IEC 60239:2005), German version EN 60239:2005, Corrigenda to DIN EN 60239:2006-03
11/1/2007 - PDF - German -
Learn More€0.00 -
€0.00
-
IEC 60519-7:2008
IEC 60519-7:2008 Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns
2/27/2008 - PDF - English, French -
Learn More€92.00 -
IEC TS 60680:2008
IEC TS 60680:2008 Test methods of plasma equipment for electroheat and electrochemical applications
3/12/2008 - PDF - English, French -
Learn More€219.00 -
DD IEC/TS 60680:2008
Test methods of plasma equipment for electroheat and electrochemical applications
4/30/2008 - PDF - English -
Learn More€250.00 -
DD IEC/TS 60519-5:2008
Safety in electroheat installations Specifications for safety plasma
4/30/2008 - PDF - English -
Learn More€180.00 -
UNE-EN 60519-11:2008
Safety in electroheat installations -- Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals
5/28/2008 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 60519-11:2008
Safety in electroheat installations -- Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals
5/28/2008 - PDF - English -
Learn More€81.60 -
DIN EN 60519-11 VDE 0721-11:2008-06
Safety in electroheat installations - Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals (IEC 60519-11:2007); German version EN 60519-11:2007
6/1/2008 - Paper - German -
Learn More€53.63 -
IEC 60703:2008
IEC 60703:2008 Test methods for electroheating installations with electron guns
10/8/2008 - PDF - English, French -
Learn More€92.00 -
JIS R 7202:2008
Testing methods for taper screw thread angle and pitch diameter of cylindrical machined graphite electrodes
10/20/2008 - PDF - Japanese -
Learn More€25.00 -
€50.18
-
BS EN 60519-7:2009
Safety in electroheat installations Particular requirements for with electron guns
1/31/2009 - PDF - English -
Learn More€180.00 -
BS EN 60703:2009
Test methods for electroheating installations with electron guns
3/31/2009 - PDF - English -
Learn More€180.00 -
UNE-EN 60703:2009
Test methods for electroheating installations with electron guns (Endorsed by AENOR in April of 2009.)
4/1/2009 - PDF - English -
Learn More€60.00 -
UNE-EN 60519-7:2009
Safety in electroheat installations -- Part 7: Particular requirements for installations with electron guns
7/8/2009 - PDF - English -
Learn More€72.00 -
UNE-EN 60519-7:2009
Safety in electroheat installations -- Part 7: Particular requirements for installations with electron guns
7/8/2009 - PDF - Spanish -
Learn More€60.00 -
DIN EN 60519-7 VDE 0721-7:2009-08
Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns (IEC 60519-7:2008), German version EN 60519-7:2008
8/1/2009 - Paper - German -
Learn More€49.48 -
NF EN 1547+A1, E32-210 (08/2009)
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment - Équipements thermiques industriels
8/1/2009 - Paper - French -
Learn More€73.00 -
NF EN 1547/IN1, E32-210/IN1 (08/2009)
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment - Équipements thermiques industriels
8/1/2009 - Paper - French -
Learn More€23.00 -
DIN EN 60519-21 VDE 0721-21:2009-09
Safety in electroheat installations - Part 21: Particular requirements for resistance heating equipment - Heating and melting glass equipment (IEC 60519-21:2008), German version EN 60519-21:2009
9/1/2009 - Paper - German -
Learn More€38.31 -
DIN EN 60703 VDE 0721-3032:2009-09
Test methods for electroheating installations with electron guns (IEC 60703:2008), German version EN 60703:2009
9/1/2009 - Paper - German -
Learn More€53.63 -
UNE-EN 60239:2009
Graphite electrodes for electric arc furnaces - Dimensions and designation
9/2/2009 - PDF - Spanish -
Learn More€70.00 -
UNE-EN 60239:2009
Graphite electrodes for electric arc furnaces - Dimensions and designation
9/2/2009 - PDF - English -
Learn More€84.00 -
NBN EN 1547+A1:2009
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
9/11/2009 - PDF - English -
Learn More€89.00 -
NBN EN 1547+A1:2009
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
9/11/2009 - PDF - French -
Learn More€89.00 -
NBN EN 1547+A1:2009
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
9/11/2009 - PDF - German -
Learn More€89.00 -
NBN EN 746-1+A1:2009
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
10/30/2009 - PDF - French -
Learn More€184.00 -
NBN EN 746-1+A1:2009
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
10/30/2009 - PDF - German -
Learn More€184.00 -
NBN EN 746-1+A1:2009
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
10/30/2009 - PDF - English -
Learn More€184.00 -
BS EN 746-1:1997+A1:2009
Industrial thermoprocessing equipment Common safety requirements for industrial
10/31/2009 - PDF - English -
Learn More€348.00 -
BS EN 1547:2001+A1:2009
Industrial thermoprocessing equipment. Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
10/31/2009 - PDF - English -
Learn More€180.00 -
NF EN 746-1+A1, E32-200-1 (11/2009)
Industrial thermoprocessing equipment - Part 1 : common safety requirements for industrial thermoprocessing equipment
11/1/2009 - Paper - French -
Learn More€108.33 -
NF EN 746-1/IN1, E32-200-1/IN1 (11/2009)
Industrial thermoprocessing equipment - Part 1 : common safety requirements for industrial thermoprocessing equipment
11/1/2009 - Paper - French -
Learn More€23.00 -
UNE-EN 1547:2001+A1:2010
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
1/20/2010 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 1547:2001+A1:2010
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
1/20/2010 - PDF - English -
Learn More€81.60 -
DIN EN 746-1:2010-02
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment, German version EN 746-1:1997+A1:2009
2/1/2010 - PDF - German -
Learn More€126.26 -
DIN EN 1547:2010-02
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment, German version EN 1547:2001+A1:2009
2/1/2010 - PDF - German -
Learn More€72.80 -
DIN EN 746-1:2010-02
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment (includes Amendment A1:2009)
2/1/2010 - PDF - English -
Learn More€157.66 -
DIN EN 1547:2010-02
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment (includes Amendment A1:2009)
2/1/2010 - PDF - English -
Learn More€91.12 -
€25.00
-
BS EN 50519:2010
Assessment of workers' exposure to electric and magnetic fields of industrial induction heating equipment
4/30/2010 - PDF - English -
Learn More€180.00 -
UNE-EN 14681:2006+A1:2010
Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (Endorsed by AENOR in May of 2010.)
5/1/2010 - PDF - English -
Learn More€76.00 -
NBN EN 14681+A1:2010
Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces
5/19/2010 - PDF - English -
Learn More€163.00 -
NBN EN 14681+A1:2010
Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces
5/19/2010 - PDF - French -
Learn More€163.00 -
NBN EN 14681+A1:2010
Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces
5/19/2010 - PDF - German -
Learn More€163.00 -
BS EN 14681:2006+A1:2010
Safety of machinery. Safety requirements for machinery and equipment for production of steel by electric arc furnaces
5/31/2010 - PDF - English -
Learn More€293.00 -
NF EN 14681+A1, E88-003 (06/2010)
Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces - Sécurité des machines
6/1/2010 - Paper - French -
Learn More€99.33 -
NF EN 14681/IN1, E88-003/IN1 (06/2010)
Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces - Sécurité des machines
6/1/2010 - Paper - French -
Learn More€23.00 -
DIN EN 14681:2010-10
Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces, German version EN 14681:2006+A1:2010
10/1/2010 - PDF - German -
Learn More€110.00 -
DIN EN 14681:2010-10
Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010)
10/1/2010 - PDF - English -
Learn More€137.85 -
DIN EN 50519 VDE 0848-519:2010-11
Assessment of workers' exposure to electric and magnetic fields of industrial induction heating equipment, German version EN 50519:2010
11/1/2010 - - -
Learn MoreFrom: €61.54 -
DIN EN 746-2:2011-02
Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems, German version EN 746-2:2010
2/1/2011 - PDF - German -
Learn More€216.26 -
DIN EN 746-2:2011-02
Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
2/1/2011 - PDF - English -
Learn More€270.47 -
UNE-EN 746-1:1997+A1:2011
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
5/18/2011 - PDF - English -
Learn More€111.60 -
UNE-EN 746-1:1997+A1:2011
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
5/18/2011 - PDF - Spanish -
Learn More€93.00 -
BS EN 60519-6:2011
Safety in electroheat installations Specifications for safety industrial microwave heating equipment
6/30/2011 - PDF - English -
Learn More€250.00 -
BS EN 61307:2011
Industrial microwave heating installations. Test methods for the determination of power output
8/31/2011 - PDF - English -
Learn More€180.00 -
UNE-EN 60519-6:2011
Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment (Endorsed by AENOR in September of 2011.)
9/1/2011 - PDF - English -
Learn More€71.00 -
UNE-EN 61307:2011
Industrial microwave heating installations - Test methods for the determination of power output (Endorsed by AENOR in October of 2011.)
10/1/2011 - PDF - English -
Learn More€60.00 -
NF EN 60519-6, C79-636 (10/2011)
Safety in electroheat installations - Part 6 : specifications for safety in industrial microwave heating equipment
10/1/2011 - Paper - French -
Learn More€112.59 -
IEC 60683:2011
IEC 60683:2011 Industrial electroheating equipment - Test methods for submerged-arc furnaces
10/19/2011 - PDF - English, French -
Learn More€92.00 -
JIS R 7202/AMENDMENT 1:2011 (R2016)
Testing methods for taper screw thread angle and pitch diameter of cylindrical machined graphite electrodes (Amendment 1)
11/21/2011 - PDF - Japanese -
Learn More€25.00 -
DIN EN 60519-6 VDE 0721-6:2011-12
Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment (IEC 60519-6:2011), German version EN 60519-6:2011
12/1/2011 - Paper - German -
Learn More€87.98 -
BS EN 60683:2012
Industrial electroheating equipment. Test methods for submerged-arc furnaces
2/29/2012 - PDF - English -
Learn More€180.00 -
BS EN 60676:2012
Industrial electroheating equipment. Test methods for direct arc furnaces
2/29/2012 - PDF - English -
Learn More€250.00 -
DIN EN 61307:2012-03
Industrial microwave heating installations - Test methods for the determination of power output (IEC 61307:2011), German version EN 61307:2011.
3/1/2012 - PDF - German -
Learn More€85.79 -
UNE-EN 60683:2012
Industrial electroheating equipment - Test methods for submerged-arc furnaces (Endorsed by AENOR in March of 2012.)
3/1/2012 - PDF - English -
Learn More€60.00 -
UNE-EN 60676:2012
Industrial electroheating equipment - Test methods for direct arc furnaces (Endorsed by AENOR in April of 2012.)
4/1/2012 - PDF - English -
Learn More€65.00 -
DIN EN 60683 VDE 0721-1022:2012-08
Industrial electroheating equipment - Test methods for submerged-arc furnaces (IEC 60683:2011), German version EN 60683:2012
8/1/2012 - Paper - German -
Learn More€53.63 -
DIN EN 60676 VDE 0721-1012:2012-09
Industrial electroheating equipment - Test methods for direct arc furnaces (IEC 60676:2011), German version EN 60676:2012
9/1/2012 - Paper - German -
Learn More€61.54 -
ISO 13579-3:2013 (R2018)
Industrial furnaces and associated processing equipment
Method of measuring energy balance and calculating efficiency
1/3/2013 - Paper - French -
Learn More€174.00 -
ISO 13579-4:2013 (R2018)
Industrial furnaces and associated processing equipment
Method of measuring energy balance and calculating efficiency
1/3/2013 - Paper - English -
Learn More€199.00 -
ISO 13579-1:2013 (R2018)
Industrial furnaces and associated processing equipment
Method of measuring energy balance and calculating efficiency
1/3/2013 - Paper - French -
Learn More€223.00 -
ISO 13579-2:2013 (R2018)
Industrial furnaces and associated processing equipment
Method of measuring energy balance and calculating efficiency
1/3/2013 - Paper - English -
Learn More€174.00 -
ISO 13579-4:2013 (R2018)
Industrial furnaces and associated processing equipment
Method of measuring energy balance and calculating efficiency
1/3/2013 - Paper - French -
Learn More€199.00 -
ISO 13579-2:2013 (R2018)
Industrial furnaces and associated processing equipment
Method of measuring energy balance and calculating efficiency
1/3/2013 - Paper - French -
Learn More€174.00 -
ISO 13579-3:2013 (R2018)
Industrial furnaces and associated processing equipment
Method of measuring energy balance and calculating efficiency
1/3/2013 - Paper - English -
Learn More€174.00 -
ISO 13579-1:2013 (R2018)
Industrial furnaces and associated processing equipment
Method of measuring energy balance and calculating efficiency
1/3/2013 - Paper - English -
Learn More€223.00 -
BS ISO 13579-4:2013
Industrial furnaces and associated processing equipment. Method of measuring energy balance calculating efficiency Furnaces with protective or reactive atmosphere
1/31/2013 - PDF - English -
Learn More€348.00 -
BS ISO 13579-2:2013
Industrial furnaces and associated processing equipment. Method of measuring energy balance calculating efficiency Reheating for steel
1/31/2013 - PDF - English -
Learn More€331.00 -
BS ISO 13579-3:2013
Industrial furnaces and associated processing equipment. Method of measuring energy balance calculating efficiency Batch-type aluminium melting
1/31/2013 - PDF - English -
Learn More€331.00 -
BS ISO 13579-1:2013
Industrial furnaces and associated processing equipment. Method of measuring energy balance calculating efficiency General methodology
1/31/2013 - PDF - English -
Learn More€377.00 -
NF ISO 13579-3, E32-201-3 (04/2013)
Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency - Part 3 : batch-type aluminium melting furnaces - Fours industriels et équipements thermiques associés
4/1/2013 - Paper - French -
Learn More€104.67 -
NF ISO 13579-4, E32-201-4 (04/2013)
Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency - Part 4 : furnaces with protective or reactive atmosphere - Fours industriels et équipements thermiques associés
4/1/2013 - Paper - French -
Learn More€115.00 -
UNE-EN 60519-10:2013
Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications (Endorsed by AENOR in June of 2013.)
6/1/2013 - PDF - English -
Learn More€63.00 -
IEC 62693:2013
IEC 62693:2013 Industrial electroheating installations - Test methods for infrared electroheating installations
6/18/2013 - PDF - English, French -
Learn More€270.00 -
BS EN 60519-10:2013
Safety in electroheating installations Particular requirements for electrical resistance trace heating systems industrial and commercial applications
7/31/2013 - PDF - English -
Learn More€180.00 -
€58.50
-
IEC 62395-1:2013
IEC 62395-1:2013 Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements
9/9/2013 - PDF - English, French -
Learn More€311.00 -
IEC 62395-2:2013
IEC 62395-2:2013 Electrical resistance trace heating systems for industrial and commercial applications - Part 2: Application guide for system design, installation and maintenance
9/9/2013 - PDF - English, French -
Learn More€397.00 -
BS EN 62693:2013
Industrial electroheating installations. Test methods for infrared electroheating installations
9/30/2013 - PDF - English -
Learn More€293.00 -
UNE-EN 60519-4:2013
Safety in electroheating installations - Part 4: Particular requirements for arc furnace installations (Endorsed by AENOR in October of 2013.)
10/1/2013 - PDF - English -
Learn More€68.00 -
NF EN 60519-10, C79-640 (10/2013)
Safety in electroheating installations - Part 10 : particular requirements for electrical resistance trace heating systems for industrial and commercial applications
10/1/2013 - Paper - French -
Learn More€88.00 -
UNE-EN 62693:2013
Industrial electroheating installations - Test methods for infrared electroheating installations (Endorsed by AENOR in October of 2013.)
10/1/2013 - PDF - English -
Learn More€72.00 -
BS EN 62395-1:2013
Electrical resistance trace heating systems for industrial and commercial applications General testing requirements
12/31/2013 - PDF - English -
Learn More€331.00 -
BS EN 62395-2:2013
Electrical resistance trace heating systems for industrial and commercial applications Application guide system design, installation maintenance
12/31/2013 - PDF - English -
Learn More€377.00 -
DIN EN 60519-10 VDE 0721-10:2014-01
Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications (IEC 60519-10:2013), German version EN 60519-10:2013
1/1/2014 - Paper - German -
Learn More€57.53 -
UNE-EN 62395-1:2013
Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements (Endorsed by AENOR in January of 2014.)
1/1/2014 - PDF - English -
Learn More€81.00 -
UNE-EN 62395-2:2013
Electrical resistance trace heating systems for industrial and commercial applications - Part 2: Application guide for system design, installation and maintenance (Endorsed by AENOR in January of 2014.)
1/1/2014 - PDF - English -
Learn More€122.00 -
NF EN 60519-4, C79-634 (03/2014)
Safety in electroheating installations - Part 4 : particular requirements for arc furnace installations
3/1/2014 - Paper - French -
Learn More€99.97 -
JIS C 2143-4-3:2014
Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
3/20/2014 - PDF - Japanese -
Learn More€25.00 -
JIS C 2143-4-1:2014
Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
3/20/2014 - PDF - Japanese -
Learn More€25.00 -
JIS C 2143-4-2:2014
Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 degree C
3/20/2014 - PDF - Japanese -
Learn More€25.00 -
DIN EN 60519-4 VDE 0721-4:2014-04
Safety in electroheating installations - Part 4: Particular requirements for arc furnace installations (IEC 60519-4:2013), German version EN 60519-4:2013
4/1/2014 - Paper - German -
Learn More€77.84 -
DIN EN 62693 VDE 0721-22:2014-04
Industrial electroheating installations - Test methods for infrared electroheating installations (IEC 62693:2013), German version EN 62693:2013
4/1/2014 - Paper - German -
Learn More€87.98 -
IEC 62798:2014
IEC 62798:2014 Industrial electroheating equipment - Test methods for infrared emitters
8/25/2014 - PDF - English, French -
Learn More€311.00 -
DIN EN 62395-1 VDE 0721-52:2014-10
Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements (IEC 62395-1:2013), German version EN 62395-1:2013
10/1/2014 - Paper - German -
Learn More€104.79 -
UNE-EN 62798:2014
Industrial electroheating equipment - Test methods for infrared emitters (Endorsed by AENOR in November of 2014.)
11/1/2014 - PDF - English -
Learn More€84.00 -
DIN EN 62395-2 VDE 0721-54:2014-12
Electrical resistance trace heating systems for industrial and commercial applications - Part 2: Application guide for system design, installation and maintenance (IEC 62395-2:2013), German version EN 62395-2:2013
12/1/2014 - Paper - German -
Learn More€164.72 -
BS EN 62798:2014
Industrial electroheating equipment. Test methods for infrared emitters
12/31/2014 - PDF - English -
Learn More€348.00 -
BS ISO 13574:2015
Industrial furnaces and associated processing equipment. Vocabulary
2/28/2015 - PDF - English -
Learn More€449.00 -
IEC 60398:2015
IEC 60398:2015 Installations for electroheating and electromagnetic processing - General performance test methods
4/9/2015 - PDF - English, French -
Learn More€270.00 -
DIN EN 62798 VDE 0721-53:2015-05
Industrial electroheating equipment - Test methods for infrared emitters (IEC 62798:2014), German version EN 62798:2014
5/1/2015 - Paper - German -
Learn More€110.67 -
BS EN 60398:2015
Installations for electroheating and electromagnetic processing. General performance test methods
6/30/2015 - PDF - English -
Learn More€293.00 -
UNE-EN 60398:2015
Installations for electroheating and electromagnetic processing - General performance test methods (Endorsed by AENOR in July of 2015.)
7/1/2015 - PDF - English -
Learn More€75.00 -
BS EN 60875-1:2015
Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre branching Generic specification
7/31/2015 - PDF - English -
Learn More€250.00 -
BS EN 1539:2015
Dryers and ovens, in which flammable substances are released. Safety requirements
10/31/2015 - PDF - English -
Learn More€377.00 -
NBN EN 1539:2015
Dryers and ovens, in which flammable substances are released - Safety requirements
11/30/2015 - PDF - German -
Learn More€205.00 -
NBN EN 1539:2015
Dryers and ovens, in which flammable substances are released - Safety requirements
11/30/2015 - PDF - English -
Learn More€205.00 -
NBN EN 1539:2015
Dryers and ovens, in which flammable substances are released - Safety requirements
11/30/2015 - PDF - French -
Learn More€205.00 -
UNE-EN 1539:2015
Dryers and ovens, in which flammable substances are released - Safety requirements (Endorsed by AENOR in January of 2016.)
1/1/2016 - PDF - English -
Learn More€117.00