25.160.20 : Welding consumables

Items 1 to 200 of 964 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • SAE AMS 4244D:2022-08-09

    Aluminum Alloy, Welding Wire 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti for Welding A206.0 Type Alloys
    8/9/2022 - PDF - English - SAE
    Learn More
    €87.00

  • SAE AMS 5821H:2022-07-06

    Steel, Corrosion-Resistant, Welding Wire 12Cr (SAE 51410 Modified) Ferrite Control Grade (Stabilized: Jul 2022)
    7/6/2022 - PDF - English - SAE
    Learn More
    €87.00

  • SAE AMS 5817G:2022-06-02

    Steel, Corrosion- and Heat-Resistant, Welding Wire 13Cr - 2.0Ni - 3.0W (Stabilized: Jun 2022)
    6/2/2022 - PDF - English - SAE
    Learn More
    €87.00

  • SAE AMS 5822E:2022-06-02

    Steel, Corrosion and Heat-Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vacuum Induction Melted (Stabilized: Jun 2022)
    6/2/2022 - PDF - English - SAE
    Learn More
    €87.00

  • SAE AMS 5823F:2022-06-02

    Steel, Corrosion- and Heat-Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V (Stabilized: Jun 2022)
    6/2/2022 - PDF - English - SAE
    Learn More
    €87.00

  • PR NF EN ISO 3581, A81-343PR (06/2022)

    Produits consommables pour le soudage - Électrodes enrobées pour le soudage manuel à l'arc des aciers inoxydables et résistant aux températures élevées - Classification
    6/1/2022 - Paper - English, French - AFNOR
    Learn More
    €100.80

  • SAE AMS 4954L:2022-05-24

    Titanium Alloy, Welding Wire 6Al - 4V
    5/24/2022 - PDF - English - SAE
    Learn More
    €87.00

  • SAE AMS 4951K:2022-05-20

    Titanium Welding Wire Commercially Pure Environment Controlled Packaging
    5/20/2022 - PDF - English - SAE
    Learn More
    €87.00

  • SAE AMS 4181D:2022-05-19

    Aluminum Alloy, Welding Wire, 7.0Si - 0.38Mg - 0.10Ti (4008 or 356)
    5/19/2022 - PDF - English - SAE
    Learn More
    €87.00

  • UNE-EN ISO 13918:2018/A1:2022

    Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/Amd 1:2021)
    5/11/2022 - PDF - Spanish - AENOR
    Learn More
    €30.00

  • UNE-EN ISO 13918:2018/A1:2022

    Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/Amd 1:2021)
    5/11/2022 - PDF - English - AENOR
    Learn More
    €36.00

  • SAE AMS 4233D:2022-05-09

    Aluminum Alloy, Welding Wire 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (201)
    5/9/2022 - PDF - English - SAE
    Learn More
    €87.00

  • DIN EN ISO 3581:2022-05

    Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO/DIS 3581:2022), German and English version prEN ISO 3581:2022
    5/1/2022 - PDF - English, German - DIN
    Learn More
    €97.01

  • 22/30438957 DC:2022

    BS EN ISO 3581. Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat-resisting steels. Classification
    4/21/2022 - PDF - English - BSI
    Learn More
    €24.00

  • SAE AMS 4189K:2022-04-14

    Aluminum Alloy Welding Wire 4.1Si - 0.20Mg (4643)
    4/14/2022 - PDF - English - SAE
    Learn More
    €87.00

  • UNE-EN ISO 17633:2018/A1:2022

    Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification - Amendment 1 (ISO 17633:2017/Amd 1:2021)
    3/30/2022 - PDF - Spanish - AENOR
    Learn More
    €30.00

  • UNE-EN ISO 17633:2018/A1:2022

    Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification - Amendment 1 (ISO 17633:2017/Amd 1:2021)
    3/30/2022 - PDF - English - AENOR
    Learn More
    €36.00

  • PR NF EN ISO 12153, A81-328PR (03/2022)

    Produits consommables pour le soudage - Fils-électrodes fourrés pour soudage à l'arc avec ou sans gaz de protection du nickel et des alliages de nickel - Classification
    3/1/2022 - Paper - English, French - AFNOR
    Learn More
    €60.48

  • DIN EN ISO 12153:2022-02

    Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys - Classification (ISO/DIS 12153:2022), German and English version prEN ISO 12153:2022
    2/1/2022 - PDF - English, German - DIN
    Learn More
    €67.29

  • DIN EN 4877-001:2022-02

    Aerospace series - Filler metals for welding - Part 001: Technical specification, German and English version prEN 4877-001:2021
    2/1/2022 - PDF - English, German - DIN
    Learn More
    €85.61

  • DIN EN 4877-002:2022-02

    Aerospace series - Filler metals for welding - Part 002: Authorized filler metals, German and English version prEN 4877-002:2021
    2/1/2022 - PDF - English, German - DIN
    Learn More
    €106.64

  • PR NF EN 4877-001, L10-907-001PR (02/2022)

    Série aérospatiale - Métaux d'apport de soudage - Partie 001 : spécification technique
    2/1/2022 - Paper - English, French - AFNOR
    Learn More
    €91.25

  • PR NF EN 4877-002, L10-907-002PR (02/2022)

    Série aérospatiale - Métaux d'apport de soudage - Partie 002 : métaux d'apport autorisés
    2/1/2022 - Paper - English, French - AFNOR
    Learn More
    €108.02

  • 22/30439221 DC:2022

    BS EN ISO 12153. Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys. Classification
    1/24/2022 - PDF - English - BSI
    Learn More
    €24.00

  • DIN EN 14700:2022-01

    Welding consumables - Welding consumables for hard-facing, German and English version prEN 14700:2021
    1/1/2022 - PDF - English, German - DIN
    Learn More
    €73.64

  • PR NF EN 14700, A81-327PR (01/2022)

    Produits consommables de soudage - Produits consommables pour le rechargement dur
    1/1/2022 - Paper - English, French - AFNOR
    Learn More
    €75.41

  • UNE-EN ISO 8167:2021

    Resistance welding - Embossed projection welding - Projections for resistance welding (ISO 8167:2021)
    12/15/2021 - PDF - Spanish - AENOR
    Learn More
    €56.00

  • UNE-EN ISO 8167:2021

    Resistance welding - Embossed projection welding - Projections for resistance welding (ISO 8167:2021)
    12/15/2021 - PDF - English - AENOR
    Learn More
    €67.00

  • 21/30443551 DC:2021

    BS EN 14700. Welding consumables. Welding consumables for hard-facing
    12/9/2021 - PDF - English - BSI
    Learn More
    €24.00

  • DIN EN ISO 2560:2021-12

    Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2020), German version EN ISO 2560:2020
    12/1/2021 - PDF - German - DIN
    Learn More
    €101.68

  • SAE AMS 4190L:2021-12-01

    Aluminum Alloy, Welding Wire 5.2Si (4043)
    12/1/2021 - PDF - English - SAE
    Learn More
    €87.00

  • BS EN ISO 8167:2021 + Redline

    Tracked Changes. Resistance welding. Embossed projection welding. Projections for resistance welding
    11/30/2021 - PDF - English - BSI
    Learn More
    €250.00

  • 21/30445601 DC:2021

    BS EN 4877-001. Aerospace series. Filler metals for welding Part 001. Technical specification
    11/18/2021 - PDF - English - BSI
    Learn More
    €24.00

  • 21/30445604 DC:2021

    BS EN 4877-002. Aerospace series. Filler metals for welding Part 002. Authorized filler
    11/18/2021 - PDF - English - BSI
    Learn More
    €24.00

  • SAE AMS 5803H:2021-10-19

    Steel, Corrosion and Heat-Resistant, Welding Wire 16.4Cr - 4.8Ni - 0.22Cb (Nb) - 3.6Cu Consumable Electrode or Vacuum Induction Melted
    10/19/2021 - PDF - English - SAE
    Learn More
    €87.00

  • SAE AMS 5832J:2021-10-18

    Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted
    10/18/2021 - PDF - English - SAE
    Learn More
    €87.00

  • SAE AMS 5776H:2021-10-12

    Steel, Corrosion and Heat-Resistant, Welding Wire 12.5Cr (SAE 51410)
    10/12/2021 - PDF - English - SAE
    Learn More
    €87.00

  • PR NF EN ISO 18274, A81-332PR (10/2021)

    Produits consommables pour le soudage - Fils-électrodes pleins, feuillards pleins, fils pleins et baguettes pleines pour le soudage par fusion du nickel et des alliages de nickel - Classification
    10/1/2021 - Paper - English, French - AFNOR
    Learn More
    €100.80

  • UNE-CEN ISO/TR 20172:2021 IN

    Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
    9/29/2021 - PDF - Spanish - AENOR
    Learn More
    €69.00

  • UNE-CEN ISO/TR 20172:2021 IN

    Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
    9/29/2021 - PDF - English - AENOR
    Learn More
    €82.00

  • UNE-EN ISO 2560:2021

    Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2020)
    9/29/2021 - PDF - Spanish - AENOR
    Learn More
    €70.00

  • UNE-EN ISO 2560:2021

    Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2020)
    9/29/2021 - PDF - English - AENOR
    Learn More
    €84.00

  • PD CEN ISO/TR 20172:2021 + Redline

    Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
    9/22/2021 - PDF - English - BSI
    Learn More
    €408.00

  • UNE-EN ISO 6847:2021

    Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2020)
    9/15/2021 - PDF - Spanish - AENOR
    Learn More
    €48.00

  • UNE-EN ISO 6847:2021

    Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2020)
    9/15/2021 - PDF - English - AENOR
    Learn More
    €57.00

  • UNE-EN ISO 14341:2021

    Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2020)
    9/15/2021 - PDF - Spanish - AENOR
    Learn More
    €56.00

  • UNE-EN ISO 14341:2021

    Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2020)
    9/15/2021 - PDF - English - AENOR
    Learn More
    €67.00

  • UNE-EN ISO 15792-1:2021

    Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020)
    9/15/2021 - PDF - Spanish - AENOR
    Learn More
    €48.00

  • UNE-EN ISO 15792-1:2021

    Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020)
    9/15/2021 - PDF - English - AENOR
    Learn More
    €57.00

  • UNE-EN ISO 15792-2:2021

    Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)
    9/15/2021 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN ISO 15792-2:2021

    Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)
    9/15/2021 - PDF - English - AENOR
    Learn More
    €61.00

  • DIN EN ISO 17633:2021-09

    Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2017 + Amd 1:2021), German version EN ISO 17633:2018 + A1:2021
    9/1/2021 - PDF - German - DIN
    Learn More
    €106.64

  • DIN EN ISO 18274:2021-09

    Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO/DIS 18274:2021), German and English version prEN ISO 18274:2021
    9/1/2021 - PDF - English, German - DIN
    Learn More
    €91.87

  • SAE AMS 5895F:2021-08-27

    Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1750 °F (954 °C) Solution Heat Treated, Welding Grade Precipitation Hardenable
    8/27/2021 - PDF - English - SAE
    Learn More
    €87.00

  • 21/30420282 DC:2021

    BS EN ISO 18274. Welding consumables. Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. Classification
    8/24/2021 - PDF - English - BSI
    Learn More
    €24.00

  • UNE-EN ISO 9453:2021

    Soft solder alloys - Chemical compositions and forms (ISO 9453:2020)
    7/28/2021 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • UNE-EN ISO 9453:2021

    Soft solder alloys - Chemical compositions and forms (ISO 9453:2020)
    7/28/2021 - PDF - English - AENOR
    Learn More
    €64.00

  • BS EN ISO 8167:2021

    Resistance welding. Embossed projection welding. Projections for resistance welding
    7/19/2021 - PDF - English - BSI
    Learn More
    €167.00

  • BS EN ISO 17633:2018+A1:2021

    Welding consumables. Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels. Classification
    7/12/2021 - PDF - English - BSI
    Learn More
    €272.00

  • SAE AMS 4246F:2021-07-07

    Aluminum Alloy, Welding Wire 7.0Si - 0.52Mg (357)
    7/7/2021 - PDF - English - SAE
    Learn More
    €87.00

  • UNE-EN ISO 24034:2021

    Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020)
    7/7/2021 - PDF - Spanish - AENOR
    Learn More
    €55.00

  • UNE-EN ISO 24034:2021

    Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020)
    7/7/2021 - PDF - English - AENOR
    Learn More
    €66.00

  • ASME BPVC-II Part C - 2021

    Section II, Materials, Part C, Specifications for Welding Rods, Electrodes, and Filler Metals
    7/1/2021 - Papier - English - ASME
    Learn More
    €940.00

  • FD CEN ISO/TR 20172, A88-058 (07/2021)

    Welding - Grouping systems for materials - European materials
    7/1/2021 - Paper - French - AFNOR
    Learn More
    €92.86

  • NBN EN ISO 17633:2018/A1:2021

    Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification - Amendment 1 (ISO 17633:2017/Amd 1:2021)
    6/28/2021 - PDF - English - NBN
    Learn More
    €35.00

  • NBN EN ISO 17633:2018/A1:2021

    Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification - Amendment 1 (ISO 17633:2017/Amd 1:2021)
    6/28/2021 - PDF - French - NBN
    Learn More
    €35.00

  • NBN EN ISO 17633:2018/A1:2021

    Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification - Amendment 1 (ISO 17633:2017/Amd 1:2021)
    6/28/2021 - PDF - German - NBN
    Learn More
    €35.00

  • UNE-EN ISO 5829:2021

    Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984)
    6/23/2021 - PDF - Spanish - AENOR
    Learn More
    €31.00

  • UNE-EN ISO 5829:2021

    Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984)
    6/23/2021 - PDF - English - AENOR
    Learn More
    €37.00

  • UNE-EN ISO 5830:2021

    Resistance spot welding - Male electrode caps (ISO 5830:1984)
    6/23/2021 - PDF - Spanish - AENOR
    Learn More
    €35.00

  • UNE-EN ISO 5830:2021

    Resistance spot welding - Male electrode caps (ISO 5830:1984)
    6/23/2021 - PDF - English - AENOR
    Learn More
    €42.00

  • UNE-EN ISO 20168:2021

    Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
    6/2/2021 - PDF - Spanish - AENOR
    Learn More
    €48.00

  • UNE-EN ISO 20168:2021

    Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
    6/2/2021 - PDF - English - AENOR
    Learn More
    €57.00

  • NF EN ISO 17633/A1, A81-358/A1 (06/2021)

    Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification - Amendment 1
    6/1/2021 - Paper - French - AFNOR
    Learn More
    €24.20

  • PD CEN ISO/TR 20172:2021

    Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
    5/12/2021 - PDF - English - BSI
    Learn More
    €272.00

  • CEN ISO/TR 20172:2021

    Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
    5/8/2021 - PDF - English - NBN
    Learn More
    €85.00

  • CEN ISO/TR 20172:2021

    Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
    5/8/2021 - PDF - French - NBN
    Learn More
    €85.00

  • SAE AMS 6375E:2021-04-06

    Steel, Welding Wire 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Melted, Environment Controlled Packaging
    4/6/2021 - PDF - English - SAE
    Learn More
    €87.00

  • DIN EN ISO 20168:2021-03

    Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016), German version EN ISO 20168:2021
    3/1/2021 - PDF - German - DIN
    Learn More
    €42.52

  • DIN EN ISO 5830:2021-03

    Resistance spot welding - Male electrode caps (ISO 5830:1984), German version EN ISO 5830:2021
    3/1/2021 - PDF - German - DIN
    Learn More
    €36.36

  • DIN EN ISO 5829:2021-03

    Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984), German version EN ISO 5829:2021
    3/1/2021 - PDF - German - DIN
    Learn More
    €36.36

  • NBN EN ISO 20168:2021

    Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
    2/25/2021 - PDF - German - NBN
    Learn More
    €50.00

  • NBN EN ISO 20168:2021

    Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
    2/25/2021 - PDF - English - NBN
    Learn More
    €50.00

  • NBN EN ISO 20168:2021

    Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
    2/25/2021 - PDF - French - NBN
    Learn More
    €50.00

  • SAE AMS 6458K:2021-02-03

    Steel, Welding Wire 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C) Vacuum Melted, Environment Controlled Packaging
    2/3/2021 - PDF - English - SAE
    Learn More
    €87.00

  • BS EN ISO 20168:2021

    Resistance welding. Locking tapers for electrode holders and electrode caps
    1/26/2021 - PDF - English - BSI
    Learn More
    €140.00

  • 21/30429608 DC:2021

    BS EN ISO 17633 AMD1. Welding consumables. Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels. Classification
    1/6/2021 - PDF - English - BSI
    Learn More
    €24.00

  • DIN EN ISO 6847:2021-01

    Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2020), German version EN ISO 6847:2020
    1/1/2021 - PDF - German - DIN
    Learn More
    €48.88

  • A5.10/A5.10M:2021 (ISO 18273:2004)

    Welding consumables-wire electrodes wires and rods for welding of aluminium and aluminium-alloys-classification
    1/1/2021 - PDF DRM - English - AWS
    Learn More
    €82.14

  • A5.10/A5.10M:2021 (ISO 18273:2004)

    Welding consumables-wire electrodes wires and rods for welding of aluminium and aluminium-alloys-classification
    1/1/2021 - Papier - English - AWS
    Learn More
    €115.44

  • AWS A5.32/A5.32M:2021

    Welding Consumables -- Gases and Gas Mixtures for Fusion Welding and Allied Processes
    1/1/2021 - PDF DRM - English - AWS
    Learn More
    €82.14

  • AWS A5.32/A5.32M:2021

    Welding Consumables -- Gases and Gas Mixtures for Fusion Welding and Allied Processes
    1/1/2021 - Papier - English - AWS
    Learn More
    €113.22

  • AWS A5.29/A5.29M:2021

    Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding
    1/1/2021 - PDF DRM - English - AWS
    Learn More
    €82.14

  • AWS A5.29/A5.29M:2021

    Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding
    1/1/2021 - Papier - English - AWS
    Learn More
    €113.22

  • AWS A5.13:2021

    Specification for Surfacing Electrodes for Shielded Metal Arc Welding
    1/1/2021 - PDF DRM - English - AWS
    Learn More
    €82.14

  • AWS A5.13:2021

    Specification for Surfacing Electrodes for Shielded Metal Arc Welding
    1/1/2021 - Papier - English - AWS
    Learn More
    €113.22

  • AWS A5.18/A5.18M:2021

    Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
    1/1/2021 - PDF DRM - English - AWS
    Learn More
    €82.14

  • AWS A5.18/A5.18M:2021

    Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
    1/1/2021 - Papier - English - AWS
    Learn More
    €116.55

  • AWS A5.20/A5.20M:2021

    SPECIFICATION FOR CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING
    1/1/2021 - PDF DRM - English - AWS
    Learn More
    €82.14

  • AWS A5.20/A5.20M:2021

    SPECIFICATION FOR CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING
    1/1/2021 - Papier - English - AWS
    Learn More
    €116.55

  • AWS A5.23/A5.23M:2021

    Low Alloy Steel Electrodes and Fluxes for Submerged Arc Welding
    1/1/2021 - PDF DRM - English - AWS
    Learn More
    €82.14

  • AWS A5.23/A5.23M:2011

    Low Alloy Steel Electrodes and Fluxes for Submerged Arc Welding
    1/1/2021 - Papier - English - AWS
    Learn More
    €116.55

  • NF EN ISO 20168, A82-116 (01/2021)

    Resistance welding - Locking tapers for electrode holders and electrode caps - Soudage par résistance - Cônes de serrage pour porte - électrodes et pointes d'électrodes
    1/1/2021 - Paper - English - AFNOR
    Learn More
    €40.69

  • DIN EN ISO 15792-1:2020-12

    Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020), German version EN ISO 15792-1:2020
    12/1/2020 - PDF - German - DIN
    Learn More
    €55.05

  • DIN EN ISO 15792-2:2020-12

    Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020), German version EN ISO 15792-2:2020
    12/1/2020 - PDF - German - DIN
    Learn More
    €55.05

  • DIN EN ISO 24034:2020-12

    Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020), German version EN ISO 24034:2020
    12/1/2020 - PDF - German - DIN
    Learn More
    €67.29

  • DIN EN ISO 14341:2020-12

    Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2020), German version EN ISO 14341:2020
    12/1/2020 - PDF - German - DIN
    Learn More
    €79.35

  • NBN EN ISO 6847:2020

    Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2020)
    10/22/2020 - PDF - English - NBN
    Learn More
    €35.00

  • NBN EN ISO 6847:2020

    Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2020)
    10/22/2020 - PDF - French - NBN
    Learn More
    €35.00

  • NBN EN ISO 2560:2020

    Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2020)
    10/22/2020 - PDF - English - NBN
    Learn More
    €85.00

  • NBN EN ISO 2560:2020

    Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2020)
    10/22/2020 - PDF - French - NBN
    Learn More
    €85.00

  • NBN EN ISO 15792-1:2020

    Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020)
    10/22/2020 - PDF - English - NBN
    Learn More
    €35.00

  • NBN EN ISO 15792-1:2020

    Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020)
    10/22/2020 - PDF - French - NBN
    Learn More
    €35.00

  • NBN EN ISO 14341:2020

    Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2020)
    10/22/2020 - PDF - English - NBN
    Learn More
    €50.00

  • NBN EN ISO 14341:2020

    Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2020)
    10/22/2020 - PDF - French - NBN
    Learn More
    €50.00

  • NBN EN ISO 15792-2:2020

    Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)
    10/22/2020 - PDF - English - NBN
    Learn More
    €35.00

  • NBN EN ISO 15792-2:2020

    Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)
    10/22/2020 - PDF - French - NBN
    Learn More
    €35.00

  • NBN EN ISO 15792-2:2020

    Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)
    10/22/2020 - PDF - German - NBN
    Learn More
    €35.00

  • NBN EN ISO 15792-1:2020

    Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020)
    10/22/2020 - PDF - German - NBN
    Learn More
    €35.00

  • NBN EN ISO 14341:2020

    Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2020)
    10/22/2020 - PDF - German - NBN
    Learn More
    €50.00

  • NBN EN ISO 6847:2020

    Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2020)
    10/22/2020 - PDF - German - NBN
    Learn More
    €35.00

  • NBN EN ISO 2560:2020

    Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2020)
    10/22/2020 - PDF - German - NBN
    Learn More
    €85.00

  • UNE-CEN ISO/TR 20173:2020 IN

    Welding - Grouping systems for materials - American materials (ISO/TR 20173:2018)
    9/23/2020 - PDF - Spanish - AENOR
    Learn More
    €140.00

  • UNE-CEN ISO/TR 20173:2020 IN

    Welding - Grouping systems for materials - American materials (ISO/TR 20173:2018)
    9/23/2020 - PDF - English - AENOR
    Learn More
    €168.00

  • NBN EN ISO 24034:2020

    Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020)
    9/23/2020 - PDF - English - NBN
    Learn More
    €50.00

  • NBN EN ISO 24034:2020

    Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020)
    9/23/2020 - PDF - French - NBN
    Learn More
    €50.00

  • NBN EN ISO 24034:2020

    Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020)
    9/23/2020 - PDF - German - NBN
    Learn More
    €50.00

  • BS EN ISO 6847:2020

    Welding consumables. Deposition of a weld metal pad for chemical analysis
    9/22/2020 - PDF - English - BSI
    Learn More
    €140.00

  • BS EN ISO 15792-2:2020

    Welding consumables. Test methods Preparation of single-run and two-run technique test pieces specimens in steel
    9/22/2020 - PDF - English - BSI
    Learn More
    €167.00

  • BS EN ISO 2560:2020 + Redline

    Tracked Changes. Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification
    9/22/2020 - PDF - English - BSI
    Learn More
    €402.00

  • BS EN ISO 14341:2020 + Redline

    Welding consumables. Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
    9/22/2020 - PDF - English - BSI
    Learn More
    €303.00

  • BS EN ISO 15792-1:2020

    Welding consumables. Test methods Preparation of all-weld metal test pieces and specimens in steel, nickel alloys
    9/21/2020 - PDF - English - BSI
    Learn More
    €140.00

  • BS EN ISO 2560:2020

    Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification
    9/17/2020 - PDF - English - BSI
    Learn More
    €307.00

  • BS EN ISO 14341:2020

    Welding consumables. Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
    9/17/2020 - PDF - English - BSI
    Learn More
    €232.00

  • BS EN ISO 24034:2020

    Welding consumables. Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. Classification
    9/4/2020 - PDF - English - BSI
    Learn More
    €167.00

  • NF EN ISO 6847, A81-304 (09/2020)

    Welding consumables - Deposition of a weld metal pad for chemical analysis
    9/1/2020 - Paper - French - AFNOR
    Learn More
    €32.49

  • NF EN ISO 14341, A81-311 (09/2020)

    Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification
    9/1/2020 - Paper - French - AFNOR
    Learn More
    €70.75

  • NF EN ISO 15792-2, A81-054-2 (09/2020)

    Welding consumables - Test methods - Part 2 : preparation of single-run and two-run technique test pieces and specimens in steel - Produits consommables pour le soudage - Méthodes d'essai - Partie 2 : Préparation d'éprouvettes en une ou deux passes en acier
    9/1/2020 - Paper - French - AFNOR
    Learn More
    €44.97

  • NF EN ISO 15792-1, A81-054-1 (09/2020)

    Welding consumables - Test methods - Part 1 : preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys - Produits consommables pour le soudage - Méthodes d'essai - Partie 1 : Méthodes d'essai pour les éprouvettes de métal fondu hors dilution pour le soudage de l'acier, du nickel et des alliages de nickel
    9/1/2020 - Paper - French - AFNOR
    Learn More
    €44.97

  • NF EN ISO 2560, A81-309 (09/2020)

    Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification
    9/1/2020 - Paper - French - AFNOR
    Learn More
    €92.86

  • UNE-CEN ISO/TR 20174:2020

    Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
    8/1/2020 - PDF - English - AENOR
    Learn More
    €75.00

  • NF EN ISO 24034, A81-372 (08/2020)

    Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification
    8/1/2020 - Paper - French - AFNOR
    Learn More
    €70.75

  • PD CEN ISO/TR 20174:2020

    Welding. Grouping systems for materials. Japanese materials
    7/14/2020 - PDF - English - BSI
    Learn More
    €272.00

  • CEN ISO/TR 20174:2020

    Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2020)
    7/10/2020 - PDF - English - NBN
    Learn More
    €60.00

  • CEN ISO/TR 20174:2020

    Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2020)
    7/10/2020 - PDF - French - NBN
    Learn More
    €60.00

  • FD CEN ISO/TR 20174, A88-057 (07/2020)

    Welding - Grouping systems for materials - Japanese materials
    7/1/2020 - Paper - French - AFNOR
    Learn More
    €81.02

  • BS EN ISO 9455-3:2020

    Soft soldering fluxes. Test methods Determination of acid value, potentiometric and visual titration
    5/20/2020 - PDF - English - BSI
    Learn More
    €140.00

  • 20/30370199 DC:2020

    BS EN ISO 8167. Resistance welding. Embossed projection welding. Projections for resistance welding
    4/14/2020 - PDF - English - BSI
    Learn More
    €24.00

  • SAE AMS 4955J:2020-04-02

    Titanium Alloy, Welding Wire 8Al - 1Mo - 1V
    4/2/2020 - PDF - English - SAE
    Learn More
    €87.00

  • SAE AMS 4956H:2020-04-02

    Titanium Alloy Welding Wire 6Al - 4V, Extra Low Interstitial Environment Controlled Packaging
    4/2/2020 - PDF - English - SAE
    Learn More
    €87.00

  • SAE AMS 5790E:2020-04-02

    Steel, Corrosion and Heat-Resistant, Welding Wire 20Cr - 10Ni - 0.75Cb High Ferrite Grade
    4/2/2020 - PDF - English - SAE
    Learn More
    €87.00

  • NF A89-421 (04/2020)

    Braze welding filler metals. Determination of the conventional tensile strengh of the bond to steel, cast iron and other metals
    4/1/2020 - Paper - French - AFNOR
    Learn More
    €70.75

  • SAE AMS 4952G:2020-03-18

    Titanium Alloy, Welding Wire 6AI - 2Sn - 4Zr - 2Mo
    3/18/2020 - PDF - English - SAE
    Learn More
    €87.00

  • BS EN ISO 14172:2015 + Redline

    Tracked Changes. Welding consumables. Covered electrodes for manual metal arc welding of nickel and nickel alloys. Classification
    2/27/2020 - PDF - English - BSI
    Learn More
    €348.00

  • BS EN ISO 1071:2015 + Redline

    Tracked Changes. Welding consumables. Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron. Classification
    2/26/2020 - PDF - English - BSI
    Learn More
    €348.00

  • BS EN ISO 26304:2018 + Redline

    Tracked Changes. Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2017)
    2/26/2020 - PDF - English - BSI
    Learn More
    €348.00

  • BS EN ISO 14171:2016 + Redline

    Tracked Changes. Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification
    2/26/2020 - PDF - English - BSI
    Learn More
    €348.00

  • BS EN ISO 17632:2015 + Redline

    Tracked Changes. Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels. Classification
    2/26/2020 - PDF - English - BSI
    Learn More
    €408.00

  • BS EN ISO 17634:2015 + Redline

    Tracked Changes. Welding consumables. Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels. Classification
    2/26/2020 - PDF - English - BSI
    Learn More
    €408.00

  • PD CEN ISO/TR 20173:2018 + Redline

    Tracked Changes. Welding. Grouping systems for materials. American materials
    2/26/2020 - PDF - English - BSI
    Learn More
    €557.00

  • BS EN ISO 8249:2018 + Redline

    Tracked Changes. Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
    2/26/2020 - PDF - English - BSI
    Learn More
    €408.00

  • BS EN ISO 3580:2017 + Redline

    Tracked Changes. Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification
    2/25/2020 - PDF - English - BSI
    Learn More
    €348.00

  • BS EN ISO 6848:2015 + Redline

    Tracked Changes. Arc welding and cutting. Nonconsumable tungsten electrodes. Classification
    2/25/2020 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN ISO 544:2017 + Redline

    Tracked Changes. Welding consumables. Technical delivery conditions for filler materials and fluxes. Type of product, dimensions, tolerances and markings
    2/25/2020 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN ISO 636:2017 + Redline

    Tracked Changes. Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification
    2/25/2020 - PDF - English - BSI
    Learn More
    €348.00

  • BS EN 13479:2017 + Redline

    Tracked Changes. Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials
    2/25/2020 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN ISO 5182:2016 + Redline

    Tracked Changes. Resistance welding. Materials for electrodes and ancillary equipment
    2/25/2020 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN ISO 18273:2015 + Redline

    Tracked Changes. Welding consumables. Wire electrodes, wires and rods for welding of aluminium and aluminium alloys. Classification
    2/25/2020 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN ISO 18275:2018 + Redline

    Tracked Changes. Welding consumables. Covered electrodes for manual metal arc welding of high-strength steels. Classification
    2/25/2020 - PDF - English - BSI
    Learn More
    €408.00

  • BS EN ISO 18276:2017 + Redline

    Tracked Changes. Welding consumables. Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels. Classification
    2/25/2020 - PDF - English - BSI
    Learn More
    €408.00

  • BS EN ISO 14343:2017 + Redline

    Tracked Changes. Welding consumables. Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels. Classification
    2/24/2020 - PDF - English - BSI
    Learn More
    €303.00

  • BS EN ISO 24373:2018 + Redline

    Tracked Changes. Welding consumables. Solid wires and rods for fusion welding of copper and copper alloys. Classification
    2/24/2020 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN ISO 14174:2019 + Redline

    Tracked Changes. Welding consumables. Fluxes for submerged arc welding and electroslag welding. Classification
    2/24/2020 - PDF - English - BSI
    Learn More
    €348.00

  • BS EN ISO 24598:2019 + Redline

    Tracked Changes. Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels. Classification
    2/24/2020 - PDF - English - BSI
    Learn More
    €348.00

  • DIN EN 3879:2020-02

    Aerospace series - Metallic materials - Filler metal for welding - Technical specification, German and English version FprEN 3879:2019
    2/1/2020 - PDF - English, German - DIN
    Learn More
    €73.64

  • AWS A4.5M/A4.5:2020

    Standard Methods for Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld
    1/1/2020 - PDF DRM - English - AWS
    Learn More
    €79.92

  • AWS A4.2M:2020

    Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal
    1/1/2020 - PDF DRM - English - AWS
    Learn More
    €79.92

  • UNE-EN ISO 14174:2019

    Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2019)
    11/27/2019 - PDF - Spanish - AENOR
    Learn More
    €57.00

  • UNE-EN ISO 14174:2019

    Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2019)
    11/27/2019 - PDF - English - AENOR
    Learn More
    €68.00

  • UNE-EN ISO 24598:2019

    Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2019)
    11/27/2019 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN ISO 24598:2019

    Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2019)
    11/27/2019 - PDF - English - AENOR
    Learn More
    €72.00

  • 19/30401572 DC:2019

    BS EN ISO 15792-2. Welding consumables. Test methods Part 2. Preparation of single-run and two-run technique test specimens in steel
    11/18/2019 - PDF - English - BSI
    Learn More
    €24.00

  • SAE AMS 4953H:2019-11-05

    Titanium Alloy Welding Wire 5Al - 2.5Sn
    11/5/2019 - PDF - English - SAE
    Learn More
    €87.00

  • 19/30401566 DC:2019

    BS EN ISO 14341. Welding consumables. Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
    11/4/2019 - PDF - English - BSI
    Learn More
    €24.00

  • 19/30395381 DC:2019

    BS EN ISO 6847. Welding consumables. Deposition of a weld metal pad for chemical analysis
    10/28/2019 - PDF - English - BSI
    Learn More
    €24.00

  • 19/30401563 DC:2019

    BS EN ISO 2560. Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification
    10/21/2019 - PDF - English - BSI
    Learn More
    €24.00

  • 19/30401569 DC:2019

    BS EN ISO 15792-1. Welding consumables. Test methods Part 1. for all-weld metal test specimens in steel, nickel and alloys
    10/21/2019 - PDF - English - BSI
    Learn More
    €24.00

  • 19/30401575 DC:2019

    BS EN ISO 24034. Welding consumables. Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. Classification
    10/21/2019 - PDF - English - BSI
    Learn More
    €24.00

  • DIN EN ISO 14174:2019-09

    Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2019), German version EN ISO 14174:2019
    9/1/2019 - PDF - German - DIN
    Learn More
    €79.35

  • DIN EN ISO 24598:2019-09

    Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2019), German version EN ISO 24598:2019
    9/1/2019 - PDF - German - DIN
    Learn More
    €85.61

  • SAE AMS 3414F:2019-08-20

    Flux, Aluminum Welding (Stabilized: Aug 2019)
    8/20/2019 - PDF - English - SAE
    Learn More
    €87.00

  • BS EN ISO 3581:2016

    Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat-resisting steels. Classification
    8/12/2019 - PDF - English - BSI
    Learn More
    €232.00

  • UNE-EN ISO 18275:2019

    Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification (ISO 18275:2018)
    7/24/2019 - PDF - Spanish - AENOR
    Learn More
    €63.00

  • UNE-EN ISO 18275:2019

    Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification (ISO 18275:2018)
    7/24/2019 - PDF - English - AENOR
    Learn More
    €75.00

  • UNE-EN ISO 24373:2019

    Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO 24373:2018)
    7/3/2019 - PDF - Spanish - AENOR
    Learn More
    €53.00

  • UNE-EN ISO 24373:2019

    Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO 24373:2018)
    7/3/2019 - PDF - English - AENOR
    Learn More
    €63.00

  • NBN EN ISO 14174:2019

    Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2019)
    6/26/2019 - PDF - German - NBN
    Learn More
    €50.00

  • NBN EN ISO 14174:2019

    Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2019)
    6/26/2019 - PDF - English - NBN
    Learn More
    €50.00

  • NBN EN ISO 14174:2019

    Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2019)
    6/26/2019 - PDF - French - NBN
    Learn More
    €50.00

  • NBN EN ISO 24598:2019

    Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2019)
    6/26/2019 - PDF - German - NBN
    Learn More
    €60.00

Items 1 to 200 of 964 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5