25.140.30 : Hand-operated tools
-
DIN ISO 5748:2006-09
Pliers and nippers - End cutting nippers - Dimensions and test values (ISO 5748:2004)
9/1/2006 - PDF - German -
Learn More€59.63 -
DIN ISO 8976:2006-09
Pliers and nippers - Multiple slip joint pliers - Dimensions and test values (ISO 8976:2004)
9/1/2006 - PDF - English -
Learn More€66.07 -
DIN ISO 9654:2006-09
Pliers and nippers for electronics - Single-purpose nippers - Cutting nippers (ISO 9654:2004)
9/1/2006 - PDF - English -
Learn More€74.58 -
DIN ISO 9657:2006-09
Pliers and nippers for electronics - General technical requirements (ISO 9657:2004)
9/1/2006 - PDF - German -
Learn More€45.98 -
DIN ISO 5743:2006-09
Pliers and nippers - General technical requirements (ISO 5743:2004)
9/1/2006 - PDF - English -
Learn More€57.57 -
DIN ISO 5746:2006-09
Pliers and nippers - Engineer's and lineman's pliers - Dimensions and test values (ISO 5746:2004)
9/1/2006 - PDF - German -
Learn More€52.90 -
DIN ISO 5749:2006-09
Pliers and nippers - Diagonal cutting nippers - Dimensions and test values (ISO 5749:2004)
9/1/2006 - PDF - English -
Learn More€74.58 -
DIN ISO 9343:2006-09
Pliers and nippers - Slip joint pliers - Dimensions and test values (ISO 9343:2004)
9/1/2006 - PDF - English -
Learn More€57.57 -
DIN ISO 9656:2006-09
Pliers and nippers for electronics - Test methods (ISO 9656:2004)
9/1/2006 - PDF - German -
Learn More€52.90 -
€85.79
-
DIN ISO 5745:2006-09
Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values (ISO 5745:2004)
9/1/2006 - PDF - German -
Learn More€65.89 -
DIN ISO 5748:2006-09
Pliers and nippers - End cutting nippers - Dimensions and test values (ISO 5748:2004)
9/1/2006 - PDF - English -
Learn More€74.58 -
DIN ISO 8979:2006-09
Pliers and nippers for electronics - Nomenclature (ISO 8979:2004)
9/1/2006 - PDF - German -
Learn More€79.72 -
DIN ISO 9655:2006-09
Pliers and nippers for electronics - Single-purpose pliers - Pliers for gripping and manipulating (ISO 9655:2004)
9/1/2006 - PDF - German -
Learn More€52.90 -
DIN ISO 9657:2006-09
Pliers and nippers for electronics - General technical requirements (ISO 9657:2004)
9/1/2006 - PDF - English -
Learn More€57.57 -
€79.72
-
DIN ISO 5746:2006-09
Pliers and nippers - Engineer's and lineman's pliers - Dimensions and test values (ISO 5746:2004)
9/1/2006 - PDF - English -
Learn More€66.07 -
€34.00
-
€46.00
-
€17.00
-
UNE 16527:2006
Pliers and nippers. Pliers for gripping and manipulating. Dimensions and tests
2/8/2006 - PDF - Spanish -
Learn More€58.00 -
UNE 16533-2:2006
Assembly tools for screws and nuts. Part 2: Short socket wrenches for spak-plugs. Technical specifications and tests
2/8/2006 - PDF - Spanish -
Learn More€17.00 -
€17.00
-
UNE 16531:2006 (R2021)
Pliers and nippers. Diagonal cutting nippers. Dimensions and tests
2/8/2006 - PDF - Spanish -
Learn More€46.00 -
UNE 16506-2:2006
Assembly tools for screws and nuts. Screwdriver bits. Part 2: Screwdriver bits for cross-recessed head screws with shank. Dimensions.
2/8/2006 - PDF - Spanish -
Learn More€27.00 -
UNE 16528:2006
Pliers and nippers. Engineer's and lineman's pliers. Dimensions and tests
2/8/2006 - PDF - Spanish -
Learn More€34.00 -
UNE 16537:2006
Pliers and nippers. Multiple slip joint pliers. Dimensions and tests
2/8/2006 - PDF - Spanish -
Learn More€27.00 -
€60.00
-
UNE 16533-1:2006
Assembly tools for screws and nuts. Part 1: Socket wrenches for spark and glow-plugs. Technical specifications and tests
2/8/2006 - PDF - Spanish -
Learn More€27.00 -
€63.00
-
DIN ISO 2380-2:2006-01
Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004)
1/1/2006 - PDF - English -
Learn More€49.16 -
DIN 5264:2006-01
Screwdrivers for slotted head screws - Attribution of screwdriver tips for slotted head screws
1/1/2006 - PDF - German -
Learn More€39.35 -
DIN ISO 8764-2:2006-01
Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004)
1/1/2006 - PDF - German -
Learn More€45.98 -
DIN ISO 2380-2:2006-01
Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004)
1/1/2006 - PDF - German -
Learn More€39.35 -
DIN ISO 8764-2:2006-01
Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004)
1/1/2006 - PDF - English -
Learn More€57.57 -
ISO 691:2005 (R2019)
Assembly tools for screws and nuts
Wrench and socket openings
11/8/2005 - Paper - French -
Learn More€48.00 -
ISO 691:2005 (R2019)
Assembly tools for screws and nuts
Wrench and socket openings
11/8/2005 - Paper - English -
Learn More€48.00 -
UNE 16571:2005
Assembly tools for screws and nuts. Slugging wrenches with open end. Technical specifications.
9/7/2005 - PDF - Spanish -
Learn More€25.00 -
UNE 16509:2005
Assembly tools for screws and nuts. Square drive extension hexagon insert, for power socket wrenches.
9/7/2005 - PDF - Spanish -
Learn More€17.00 -
UNE 16519:2004 ERRATUM:2005
Assembly tools for screws and nuts. Hexagon socket screw keys.
6/15/2005 - PDF - Spanish -
Learn More€0.00 -
BS ISO 9654:2004
Pliers and nippers for electronics. Single purpose nippers. Cutting nippers
12/13/2004 - PDF - English -
Learn More€151.00 -
€151.00
-
€250.00
-
BS ISO 5748:2004
Pliers and nippers. End cutting nippers. Dimensions and test values
12/10/2004 - PDF - English -
Learn More€151.00 -
BS ISO 9655:2004
Pliers and nippers for electronics. Single-purpose nippers. Pliers for gripping and manipulating
12/10/2004 - PDF - English -
Learn More€151.00 -
BS ISO 5749:2004
Pliers and nippers. Diagonal cutting nippers. Dimensions and test values
12/10/2004 - PDF - English -
Learn More€151.00 -
€180.00
-
BS ISO 9657:2004
Pliers and nippers for electronics. General technical requirements
12/9/2004 - PDF - English -
Learn More€151.00 -
BS ISO 5745:2004
Pliers and nippers. Pliers for gripping and manipulating. Dimensions and test values
12/9/2004 - PDF - English -
Learn More€180.00 -
€250.00
-
€48.00
-
€48.00
-
€72.00
-
€72.00
-
€72.00
-
€72.00
-
€72.00
-
€48.00
-
ISO 9657:2004 (R2018)
Pliers and nippers for electronics
General technical requirements
9/29/2004 - Paper - English -
Learn More€48.00 -
€48.00
-
€72.00
-
ISO 9657:2004 (R2018)
Pliers and nippers for electronics
General technical requirements
9/29/2004 - Paper - French -
Learn More€48.00 -
€48.00
-
€72.00
-
€48.00
-
€72.00
-
UNE 16547:2004
Assembly tools for pipes. Portable stand. Technical specifications.
7/23/2004 - PDF - Spanish -
Learn More€34.00 -
UNE 16554:2004
Assembly tools for pipes. Pipe wrenches, heavy duty type. Technical specifications and tests.
7/23/2004 - PDF - Spanish -
Learn More€39.00 -
UNE 16561:2004
Assembly tools for pipes. Bench yoke vise. Technical specifications and tests.
7/23/2004 - PDF - Spanish -
Learn More€34.00 -
UNE 16596:2004
Assembly tools for screws and nuts. Hand impact screwdriver. Technical specifications and tests.
7/9/2004 - PDF - Spanish -
Learn More€27.00 -
UNE 16517:2004
Assembly tools for screws and nuts. Spiral ratchet screwdriver ends. Dimensions.
7/9/2004 - PDF - Spanish -
Learn More€17.00 -
UNE 16599-2:2004
Axes. Part 2: Fireman's axes. Technical specifications and tests.
7/9/2004 - PDF - Spanish -
Learn More€34.00 -
UNE 16598:2004
Locking tools. Engineer's bench vise. Technical specifications and tests.
7/9/2004 - PDF - Spanish -
Learn More€49.00 -
€34.00
-
UNE 16550:2004
Assembly tools for screws and nuts. Slugging wrench, box (ring). Technical specifications.
7/9/2004 - PDF - Spanish -
Learn More€25.00 -
UNE 16599-1:2004
Axes. Part 1: Axes Vizcaino pattern.Technical specifications and tests.
7/9/2004 - PDF - Spanish -
Learn More€34.00 -
UNE 16519:2004
Assembly tools for screws and nuts. Hexagon socket screw keys.
7/2/2004 - PDF - Spanish -
Learn More€39.00 -
UNE 16582:2004
ASSEMBLY TOOLS FOR SCREWS AND NUTS. SOCKET WRENCH, SPIN TYPE. TECHNICAL SPECIFICATIONS AND TESTS.
7/2/2004 - PDF - Spanish -
Learn More€25.00 -
UNE 16560:2004
ASSEMBLY TOOLS FOR PIPES. PORTABLE STANDS GRIP WITH CHAIN. TECHNICAL SPECIFICATIONS AND TESTS.
6/11/2004 - PDF - Spanish -
Learn More€34.00 -
ISO 8764-1:2004 (R2018)
Assembly tools for screws and nuts
Screwdrivers for cross-recessed head screws
3/31/2004 - Paper - English -
Learn More€148.00 -
ISO 8764-1:2004 (R2018)
Assembly tools for screws and nuts
Screwdrivers for cross-recessed head screws
3/31/2004 - Paper - French -
Learn More€148.00 -
ISO 8764-2:2004 (R2019)
Assembly tools for screws and nuts
Screwdrivers for cross-recessed head screws
3/22/2004 - Paper - English -
Learn More€48.00 -
ISO 8764-2:2004 (R2019)
Assembly tools for screws and nuts
Screwdrivers for cross-recessed head screws
3/22/2004 - Paper - French -
Learn More€48.00 -
UNE 16538:2004
Assembly tools for screws and nuts. Stamping combination wrenches. Technical specifications and tests.
2/20/2004 - PDF - Spanish -
Learn More€25.00 -
UNE 16589:2003
Striking tools. Hammers, mallets and allied tools. Engineer's hammers.
1/31/2003 - PDF - Spanish -
Learn More€17.00 -
UNE 16597:2003
Pulling out tools. Two slippy jaws universal pullers. Technical specifications and tests.
1/31/2003 - PDF - Spanish -
Learn More€34.00 -
UNE 16590-1:2003
Striking tools. Hammer, mallets and allied tools. Technical specifications and tests. Part 1: Joiner's hammers.
1/31/2003 - PDF - Spanish -
Learn More€17.00 -
IEC 60745-2-8:2003
IEC 60745-2-8:2003 Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
1/27/2003 - PDF - English -
Learn More€46.00 -
IEC 60745-2-8:2003
IEC 60745-2-8:2003 Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
1/27/2003 - PDF - English, French -
Learn More€46.00 -
IEC 60745-2-1:2003
IEC 60745-2-1:2003 Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills
1/23/2003 - PDF - English -
Learn More€92.00 -
IEC 60745-2-1:2003
IEC 60745-2-1:2003 Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills
1/23/2003 - PDF - English, French -
Learn More€92.00 -
IEC 60745-2-2:2003
IEC 60745-2-2:2003 Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches
1/23/2003 - PDF - English -
Learn More€46.00 -
IEC 60745-2-2:2003
IEC 60745-2-2:2003 Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches
1/23/2003 - PDF - English, French -
Learn More€46.00 -
€39.35
-
DIN 2324:2002-10
Bits with square drive for screws with internal serration, hand-operated
10/1/2002 - PDF - German -
Learn More€39.35 -
€39.35
-
DIN 7422:2002-10
Bits with square drive for hexagon socket screws, hand operated
10/1/2002 - PDF - German -
Learn More€39.35 -
UNE 16545:2002
Assembly tools for screws and nuts. Double-headed, flat and offset, box wrenches. Technical specifications and tests.
9/30/2002 - PDF - Spanish -
Learn More€25.00 -
UNE 16532:2002
Assembly tools for screws and nuts. Adjustable wrenches. Technical specifications and tests.
9/30/2002 - PDF - Spanish -
Learn More€34.00 -
UNE 16521:2002
Assembly tools for screws and nuts. Double-headed open-ended engineers' wrenches. Technical specifications and tests.
9/26/2002 - PDF - Spanish -
Learn More€25.00 -
UNE 16522:2002
Assembly tools for screws and nuts. Double-headed, deep offset and modified offset, box wrenches. Technical specifications and tests.
9/26/2002 - PDF - Spanish -
Learn More€27.00 -
UNE 16579:2002
Engineer's cold chisels, stonemason's chisel and allied tools. Stonemason's chisels. Technical specifications and tests.
9/25/2002 - PDF - Spanish -
Learn More€27.00 -
UNE 16576:2002
Engineer's cold chisels, stonemason's chisels and alllied tools. Taper punches. Technical specifications and tests.
9/25/2002 - PDF - Spanish -
Learn More€34.00 -
UNE 16610:2002
Assembly tools for screws and nuts. Flare nut wrenches. Technical specifications and tests.
9/25/2002 - PDF - Spanish -
Learn More€25.00 -
UNE 16566:2002
Engineer's chisels, cross chisels and similar tools. Nomenclature.
9/25/2002 - PDF - Spanish -
Learn More€39.00 -
UNE 16586:2002
Assembly tools for screws and nuts. Socket wrenches, double end. Technical specifications and tests.
9/25/2002 - PDF - Spanish -
Learn More€27.00 -
UNE 16553:2002
Assembly tools for pipes. Basin wrenches. Technical specifications.
9/25/2002 - PDF - Spanish -
Learn More€27.00 -
UNE 16578:2002
Engineer's coild chisels, stonemason's chisels and allied tools. Stonemason's pointed chisels. Technical specifications and tests.
9/25/2002 - PDF - Spanish -
Learn More€27.00 -
UNE 16594-2:2002
Assembly tools for screws and nuts. Socket wrenches, double end. Part 2: Open socket wrenches. Technical specifications and test.
9/25/2002 - PDF - Spanish -
Learn More€25.00 -
UNE 16569:2002
Engineer's cold chisels, stonemason's chisels and allied tools. Engineer's grooving chisels. Technical specifications and tests.
9/25/2002 - PDF - Spanish -
Learn More€34.00 -
UNE 16587:2002
Striking tools. Hammers, mallets and similar tools. Nomenclature.
9/25/2002 - PDF - Spanish -
Learn More€39.00 -
UNE 16556:2002
Assembly tools for pipes. Pipe wrenches duckbill pattern. Technical specifications and tests.
9/25/2002 - PDF - Spanish -
Learn More€34.00 -
IEC 60745-2-4:2002
IEC 60745-2-4:2002 Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
7/31/2002 - PDF - English -
Learn More€46.00 -
IEC 60745-2-4:2002
IEC 60745-2-4:2002 Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
7/31/2002 - PDF - English, French -
Learn More€46.00 -
UNE 16575:2002
Engineer's cold chisels, stonemason's chisels and allied tools. Engineer's parallel pin punches. Technical specifications and tests.
4/30/2002 - PDF - Spanish -
Learn More€34.00 -
€25.00
-
UNE 16520-1:2001
Assembly tools for screws and nuts. Screwdrivers for cross-recessed head screws. Part 1: Driver points.
11/22/2001 - PDF - Spanish -
Learn More€69.00 -
UNE 16594-1:2001
Assembly tools for screws and nuts. Socket wrenches, double end. Part 1: Close socket wrenches. Technical specifications and tests.
11/22/2001 - PDF - Spanish -
Learn More€25.00 -
UNE 16585:2001
Engineer's cold chisels, stonemason'sa and allied tools. Wood wedges. Techincal specifications and tests.
11/22/2001 - PDF - Spanish -
Learn More€34.00 -
UNE 16567:2001
Engineer's cold chisels, stonemason's chisels and allied tools. Engineer's chisels. Technical specifications and tests.
11/22/2001 - PDF - Spanish -
Learn More€27.00 -
UNE 16595:2001
Assembly tools for screws and nuts. Socket wrench, double end, flex head. Technical specifications and tests.
11/22/2001 - PDF - Spanish -
Learn More€27.00 -
UNE 16588:2001
Striking tools. Hammers, mallets and allied tools. Technical specifications and tests.
11/22/2001 - PDF - Spanish -
Learn More€34.00 -
UNE 16574:2001
Engineer's cold chisels, stonemason's chisels and allied tools. Engineer's center punches. Technical specifications and tests.
11/22/2001 - PDF - Spanish -
Learn More€34.00 -
BS ISO 1173:2001
Assembly tools for screws and nuts. Drive ends for hand and machine-operated screwdriver bits and connecting parts. Dimensions, torque testing
7/15/2001 - PDF - English -
Learn More€180.00 -
UNE 16551:2001
Assembly tools for pipes. Pipe wrenches curved pattern. Technical specifications and tests.
5/31/2001 - PDF - Spanish -
Learn More€34.00 -
UNE 16590-4:2001
Striking tools. Hammers, mallets and allied tools. Part 4: Mallets.
5/31/2001 - PDF - Spanish -
Learn More€46.00 -
UNE 16568:2001
Engineer's cold chisel's, stonemason's chisels and allied tools. Engineer's crosscut chisel. Technical specifications and tests.
5/31/2001 - PDF - Spanish -
Learn More€27.00 -
NF ISO 1173, E74-360 (05/2001)
Assembly tools for screws and nuts - Drive ends for hand - and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing - Outils de manoeuvre pour vis et écrous
5/1/2001 - Paper - French -
Learn More€75.50 -
ISO 1173:2001 (R2023)
Assembly tools for screws and nuts
Drive ends for hand- and machine-operated screwdriver bits and connecting parts
3/29/2001 - Paper - English -
Learn More€72.00 -
ISO 1173:2001 (R2023)
Assembly tools for screws and nuts
Drive ends for hand- and machine-operated screwdriver bits and connecting parts
3/29/2001 - Paper - French -
Learn More€72.00 -
€25.00
-
€25.00
-
UNE 16592:2000 (R2010)
Pliers and nippers. Pliers for retaining rings for shafts. Technical requirements and test.
10/11/2000 - PDF - Spanish -
Learn More€27.00 -
UNE 16511:2000
Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Technical specifications and tests.
10/11/2000 - PDF - Spanish -
Learn More€34.00 -
UNE 16593:2000 (R2010)
Pliers and nippers. Pliers for retaining rings for bores. Technical requirements and tests.
10/11/2000 - PDF - Spanish -
Learn More€27.00 -
UNE 16512:2000
Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Technical specifications and tests.
10/11/2000 - PDF - Spanish -
Learn More€34.00 -
€39.35
-
€39.35
-
€39.35
-
UNE 16548:2000
Cutting tools for tubes. Tube cutters for steel tubes. Technical specifications and tests.
7/21/2000 - PDF - Spanish -
Learn More€46.00 -
UNE 16506-3:2000
Assembly tools for screws and nuts. Screwdriver bits. Parte 3: Screwdriver bits for hexagon socket screws, with shank. Technical specifications and tests.
7/21/2000 - PDF - Spanish -
Learn More€34.00 -
ISO 15601:2000 (R2023)
Hammers
Technical specifications concerning steel hammer heads
7/6/2000 - Paper - English -
Learn More€48.00 -
ISO 15601:2000 (R2023)
Hammers
Technical specifications concerning steel hammer heads
7/6/2000 - Paper - French -
Learn More€48.00 -
UNE 16559:2000
Pipe cutting tools. Plastic and cooper pipe automatic cutters. Specifications and tests.
4/17/2000 - PDF - Spanish -
Learn More€49.00 -
UNE 16507-3:1999 ERRATUM (R2010)
ASSEMBLY TOOLS FOR SCREWS AND NUTS. SQUARE DRIVE SOCKETS. PART 3: MACHINE-OPERATED SOCKETS "NON IMPACT". DIMENSIONS.
10/30/1999 - PDF - Spanish -
Learn More€0.00 -
€39.35
-
UNE 16558:1999 (R2010)
PIPE CUTTING TOOLS. TELESCOPIC TUBING CUTTERS FOR COOPER. NOMENCLATURE, SPECIFICATIONS AND TESTS.
9/22/1999 - PDF - Spanish -
Learn More€39.00 -
€34.00
-
UNE 16507-3:1999 (R2010)
ASSEMBLY TOOLS FOR SCREWS AND NUTS. SQUARE DRIVE SOCKETS. PART 3: MACHINE-OPERATED SOCKETS "NON IMPACT". DIMENSIONS.
9/15/1999 - PDF - Spanish -
Learn More€25.00 -
UNE 16555-3:1999 (R2007)
ASSEMBLY TOOLS FOR PIPES. PART 3: STRAP WRENCHES. NOMENCLATURE, SPECIFICATIONS AND TESTS.
6/11/1999 - PDF - Spanish -
Learn More€25.00 -
UNE 16529:1999 (R2007)
PLIERS AND NIPPERS. LEVER ASSISTED SIDE CUTTING PLIERS, END AND DIAGONAL CUTTING NIPPERS. DIMENSIONS AND TESTS VALUES.
2/22/1999 - PDF - Spanish -
Learn More€46.00 -
UNE 16591-1:1999 (R2007)
MASON PICKS, PICKS AND SIMILAR TOOLS. PART 1: TESTS AND MARKING.
2/22/1999 - PDF - Spanish -
Learn More€27.00 -
UNE 16555-2:1998 (R2007)
ASSEMBLY TOOLS FOR PIPES. PART 2: CHAIN PIPE WRENCHES. LIGHT WORK. SPECIFICATIONS AND TESTS.
11/18/1998 - PDF - Spanish -
Learn More€27.00 -
UNE 16590-3:1998 (R2010)
STRIKING TOOLS. HAMMERS, MALLETS AND ALLIED TOOLS. PART 3: MASON HAMMER.
11/18/1998 - PDF - Spanish -
Learn More€17.00 -
UNE 16590-2:1998 (R2004)
STRIKING TOOLS. HAMMERS, MALLETS AND ALLIED TOOLS. CURVED CLAW HAMMERS.
9/16/1998 - PDF - Spanish -
Learn More€34.00 -
UNE 16518:1998 (R2004)
ASSEMBLY TOOLS FOR SCREWS AND NUTS. FOUR-WAY SOCKET WRENCHES. DIMENSIONS AND TESTS.
9/8/1998 - PDF - Spanish -
Learn More€27.00 -
UNE 16555-1:1998 (R2007)
ASSEMBLY TOOLS FOR PIPES. PART 1: CHAIN PIPE WRENCHES. NOMENCLATURE, SPECIFICATIONS AND TESTS.
9/8/1998 - PDF - Spanish -
Learn More€34.00 -
€151.00
-
UNE 16549:1998 (R2005)
PIPE CUTTING TOOLS. COPPER AND ALUMINIUM PIPE MINICUTTERS. NOMENCLATURE, SPECIFICATIONS AND TESTS.
5/7/1998 - PDF - Spanish -
Learn More€46.00 -
UNE 16523:1998 (R2005)
ASSEMBLY TOOLS FOR PIPES. PIPE WRENCHES, SWEDISH PATTERN. SPECIFICATIONS AND TESTS.
3/30/1998 - PDF - Spanish -
Learn More€34.00 -
BS ISO 10914:1996
Assembly tools for screws and nuts. Sockets and wrenches for spline drive
2/15/1998 - PDF - English -
Learn More€180.00 -
NF E74-400 (01/1998)
Coated hand tools for work in potentially explosive atmospheres.
1/1/1998 - Paper - French -
Learn More€108.33 -
€48.00
-
ISO 6788:1997 (R2018)
Assembly tools for screws and nuts
Four-way socket wrenches
12/18/1997 - Paper - English -
Learn More€48.00 -
€39.35
-
€39.35
-
UNE 16564-2:1997 (R2007)
BENDING PIPE TOOLS. PART 2: NIPPER TUBE BENDER. CLASSIFICATION, TECHNIcal specifications, test and marking.
11/20/1997 - PDF - Spanish -
Learn More€27.00 -
UNE 16552:1997 (R2004)
ASSEMBLY TOOLS FOR PIPES. PIPE WRENCHES. STILLSON PATTERN. SPECIFICATIONS AND TESTS.
11/12/1997 - PDF - Spanish -
Learn More€39.00 -
UNE 16564-1:1997 (R2007)
BENDING PIPE TOOLS. PART 1: SPRING TUBE BENDER. CLASSIFICATION, TECHNIcs specifications and tests.
4/24/1997 - PDF - Spanish -
Learn More€34.00 -
UNE 16563-3:1997 (R2007)
FORMING PIPE TOOLS. PART 3: FLARING AND SWAGING TOOL. NOMENCLATURE, SPECIFICATIONS, TESTS AND MARKING.
1/29/1997 - PDF - Spanish -
Learn More€46.00 -
€151.00
-
UNE 16563-2:1996 (R2007)
FORMING PIPE TOOLS. PART 2: FLARING TOOL BY SWIVELING. NOMENCLATURE, Specifications, tests and marking.
11/14/1996 - PDF - Spanish -
Learn More€27.00 -
UNE 16563-1:1996 (R2007)
FORMING PIPE TOOLS. PART 1: FLARING TOOL BY PRESSING. NOMENCLATURE, SPECIFICATIONS, TESTS AND MARKING.
11/14/1996 - PDF - Spanish -
Learn More€52.00 -
UNE 16583:1996 (R2003)
ASSEMBLY TOOLS FOR SCREW AND NUTS. SLIDING TEE BARS. SPECIFICATIONS AND TESTS.
7/24/1996 - PDF - Spanish -
Learn More€27.00 -
BS 3087-7:1996
Pliers and nippers Specification for dimensions of lever assisted side cutting pliers, end diagonal
6/15/1996 - PDF - English -
Learn More€151.00 -
€27.00
-
BS EN 50109-2-3:1996
Hand crimping tools. Tools for the crimp termination of electric cables and wires low frequency radio applications. Particular requirements Contacts electrical connectors
3/15/1996 - PDF - English -
Learn More€250.00 -
BS EN 50109-1:1996
Hand crimping tools. Tools for the crimp termination of electric cables and wires low frequency radio applications General requirements tests
2/15/1996 - PDF - English -
Learn More€180.00 -
BS EN 50109-2-5:1996
Hand crimping tools. Tools for the crimp termination of electric cables and wires low frequency radio applications. Particular requirements Termination twin-ax cable databus applications
2/15/1996 - PDF - English -
Learn More€180.00 -
BS EN 50109-2-1:1996
Hand crimping tools. Tools for the crimp termination of electric cables and wires low frequency radio applications. Particular requirements Radio connectors concentric contacts. Open throat tools with fixed dies, sizes A to E, V W
2/15/1996 - PDF - English -
Learn More€151.00 -
BS EN 50109-2-4:1996
Hand crimping tools. Tools for the crimp termination of electric cables and wires low frequency radio applications. Particular requirements Centre contacts RF connectors, series SMZ
2/15/1996 - PDF - English -
Learn More€180.00 -
€293.00
-
BS 7794:1995
Specification for square-drive sockets, driving squares and accessories for power-driven socket wrenches
11/15/1995 - PDF - English -
Learn More€293.00 -
ISO 5747:1995 (R2023)
Pliers and nippers
Lever assisted side cutting pliers, end and diagonal cutting nippers
11/2/1995 - Paper - English -
Learn More€72.00 -
ISO 5747:1995 (R2023)
Pliers and nippers
Lever assisted side cutting pliers, end and diagonal cutting nippers
11/2/1995 - Paper - French -
Learn More€72.00 -
UNE-EN 50109-1:1993
HAND CRIMPING TOOLS. TOLLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS. PART 1: GENERAL REQUIREMENTS AND TESTS. (Endorsed by AENOR in November of 1995.)
11/1/1995 - PDF - English -
Learn More€60.00 -
DIN EN 50109-2-4:1995-11
Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-4: Particular requirements for centre contacts of RF connectors, series SMZ; German version EN 50109-2-4:1995
11/1/1995 - PDF - German -
Learn More€59.63 -
DIN EN 50109-2-2:1995-11
Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-2: Particular requirements for radio frequency connectors and concentric contacts; open throat tools with removable and interchangeable dies, sizes A to G, Q bis T, V and W; German version EN 50109-2-2:1995
11/1/1995 - PDF - German -
Learn More€52.90 -
UNE-EN 50109-2-2:1993
HAND CRIMPING TOOLS. TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS. PART 2-2: PARTICULAR REQUIREMENTS FOR RADIO FREQUENCY CONNECTORS AND CONCENTRIC CONTACTS. OPEN THROAT TOOLS WITH REMOVABLE AND INTERCHANGEABLE DIES, SIZES A TO G.... (Endorsed by AENOR in November of 1995.)
11/1/1995 - PDF - English -
Learn More€59.00 -
DIN EN 50109-1:1995-11
Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 1: General requirements and tests; German version EN 50109-1:1995
11/1/1995 - PDF - German -
Learn More€39.35 -
DIN EN 50109-2-5:1995-11
Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications; German version EN 50109-2-5:1995
11/1/1995 - PDF - German -
Learn More€59.63 -
DIN EN 50109-2-3:1995-11
Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors; German version EN 50109-2-3:1995
11/1/1995 - PDF - German -
Learn More€79.72 -
UNE-EN 50109-2-5:1993
HAND CRIMPING TOOLS. TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS. PART 2-5: PARTICULAR REQUIREMENTS FOR THE TERMINATION OF TWIN-AX CABLE FOR DATABUS APPLICATIONS. (Endorsed by AENOR in November of 1995.)
11/1/1995 - PDF - English -
Learn More€65.00 -
DIN EN 50109-2-1:1995-11
Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-1: Particular requirements for radio frequency connectors and concentric contacts; open throat tools with fixed dies, sizes A to E, V and W; German version EN 50109-2-1:1995
11/1/1995 - PDF - German -
Learn More€45.98 -
DIN ISO 9243:1994-09
Pliers and nippers - Carpenter's pincers - Dimensions and test values; identical with ISO 9243:1988
9/1/1994 - PDF - German -
Learn More€39.35 -
DIN ISO 9242:1994-09
Pliers and nippers - Construction worker's pincers - Dimensions and test values; identical with ISO 9242:1988
9/1/1994 - PDF - German -
Learn More€45.98 -
€293.00
-
€39.35
-
€39.35
-
€180.00