25.140.30 : Hand-operated tools
-
€72.00
-
BS ISO 4229:2017
Assembly tools for screws and nuts. Single-head engineer's wrenches for lower torque applications. Maximum outside dimensions of heads and test torques
5/2/2017 - PDF - English - BSI
Learn More€151.00 -
NF EN ISO 6789-1, E74-325-1 (05/2017)
Assembly tools for screws and nuts - Hand torque tools - Part 1 : Requirements and methods for design conformance testing and quality conformance testing : minimum requirements for declaration of conformance - Outils de manœuvre pour vis et écrous - Outils dynamométriques à commande manuelle - Exigences et méthodes d'essai pour vérifier la conformité de conception, la conformité de qualité et la procédure de réétalonnage
5/1/2017 - Paper - French - AFNOR
Learn More€86.50 -
NF EN ISO 6789-2, E74-325-2 (05/2017)
Assembly tools for screws and nuts - Hand torque tools - Part 2 : Requirements for calibration and determination of measurement uncertainly
5/1/2017 - Paper - French - AFNOR
Learn More€108.00 -
€83.85
-
NBN EN ISO 6789-2:2017
Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017)
4/19/2017 - PDF - French - NBN
Learn More€163.00 -
NBN EN ISO 6789-2:2017
Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017)
4/19/2017 - PDF - German - NBN
Learn More€163.00 -
NBN EN ISO 6789-2:2017
Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017)
4/19/2017 - PDF - English - NBN
Learn More€163.00 -
NBN EN ISO 6789-1:2017
Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017)
4/19/2017 - PDF - French - NBN
Learn More€121.00 -
NBN EN ISO 6789-1:2017
Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017)
4/19/2017 - PDF - German - NBN
Learn More€121.00 -
NBN EN ISO 6789-1:2017
Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017)
4/19/2017 - PDF - English - NBN
Learn More€121.00 -
ISO 4229:2017 (R2023)
Assembly tools for screws and nuts
Single-head engineer's wrenches for lower torque applications
4/4/2017 - Paper - French - ISO
Learn More€48.00 -
ISO 4229:2017 (R2023)
Assembly tools for screws and nuts
Single-head engineer's wrenches for lower torque applications
4/4/2017 - Paper - English - ISO
Learn More€48.00 -
€39.35
-
DIN 3122:2017-04
Driving parts for hand operated square drive socket wrenches
4/1/2017 - PDF - German - DIN
Learn More€52.90 -
€45.98
-
BS EN ISO 6789-1:2017
Assembly tools for screws and nuts. Hand torque Requirements methods design conformance testing quality testing: minimum requirements declaration of
3/31/2017 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 6789-2:2017
Assembly tools for screws and nuts. Hand torque Requirements calibration determination of measurement uncertainty
3/31/2017 - PDF - English - BSI
Learn More€348.00 -
SAE AS 22520/3D:2021-12-27
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, INSPECTION GAGE FOR TYPE I AND II TOOLS
3/21/2017 - PDF - English - SAE
Learn More€54.00 -
NF ISO 1085, E74-305 (03/2017)
Assembly tools for screws and nuts - Double-ended wrenches - Size pairing
3/1/2017 - Paper - French - AFNOR
Learn More€33.62 -
NF ISO 3318, E74-304 (03/2017)
Assembly tools for screws and nuts - Open-ended wrenches, box wrenches and combination wrenches - Maximum widths of heads - Outils de manoeuvre pour vis et écrous - Clés à fourche doubles, clés polygonales doubles et clés mixtes - Largeurs maximales d'encombrement des têtes
3/1/2017 - Paper - French - AFNOR
Learn More€33.62 -
€148.00
-
€199.00
-
€148.00
-
€199.00
-
€32.34
-
€32.34
-
SAE AS 22520/45A:2021-12-27
CRIMPING TOOLS, TYPE I, HAND, WIRE, TERMINATION FOR WIRE BARREL SIZE 10 POWER CONTACTS
2/1/2017 - PDF - English - SAE
Learn More€54.00 -
NF EN ISO 4230, E66-154 (01/2017)
Hand - and machine-operated circular screwing dies for taper pipe threads - R series
1/1/2017 - Paper - French - AFNOR
Learn More€33.62 -
BS ISO 3318:2016
Assembly tools for screws and nuts. Open-ended wrenches, box wrenches and combination wrenches. Maximum widths of heads
12/31/2016 - PDF - English - BSI
Learn More€151.00 -
BS ISO 1085:2016
Assembly tools for screws and nuts. Double-ended wrenches. Size pairing
12/31/2016 - PDF - English - BSI
Learn More€151.00 -
ISO 3318:2016 (R2022)
Assembly tools for screws and nuts
Open-ended wrenches, box wrenches and combination wrenches
12/8/2016 - Paper - French - ISO
Learn More€48.00 -
€48.00
-
ISO 3318:2016 (R2022)
Assembly tools for screws and nuts
Open-ended wrenches, box wrenches and combination wrenches
12/8/2016 - Paper - English - ISO
Learn More€48.00 -
ISO 1085:2016 (R2022)
Assembly tools for screws and nuts
Double-ended wrenches
12/8/2016 - Paper - English - ISO
Learn More€48.00 -
BS EN 62841-2-8:2016
Electric motor-operated hand-held tools, transportable tools and lawn garden machinery. Safety Particular requirements for shears nibblers
11/30/2016 - PDF - English - BSI
Learn More€180.00 -
SAE AS 22520/35:2021-12-27
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, IN-SERVICE INSPECTION GAGES FOR AS22520/34 CRIMP TOOLS
11/14/2016 - PDF - English - SAE
Learn More€39.00 -
SAE AS 22520/41:2023-10-03
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, TYPE II FOR TERMINALS AND SPLICES SIZE 10-12
11/14/2016 - PDF - English - SAE
Learn More€47.00 -
SAE AS 22520/43:2023-10-03
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, IN-SERVICE INSPECTION GAGE FOR AS22520/40 CRIMP TOOLS
11/14/2016 - PDF - English - SAE
Learn More€39.00 -
€32.34
-
DIN ISO 2936:2016-10
Assembly tools for screws and nuts - Hexagon socket screw keys (ISO 2936:2014)
10/1/2016 - PDF - German - DIN
Learn More€52.90 -
VG 95236-4/A1:2016-10
Tools for electrical components - Part 4: Inserting and extracting tools for contacts, detail standard, Amendment A1, Text in German and English
10/1/2016 - PDF - English, German - DIN
Learn More€39.35 -
VG 95236-11/A1:2016-10
Tools for electrical components - Part 11: Crimping tools, hydraulic, detail standard, Amendment A1, Text in German and English
10/1/2016 - PDF - English, German - DIN
Learn More€40.90 -
DIN ISO 2936:2016-10
Assembly tools for screws and nuts - Hexagon socket screw keys (ISO 2936:2014)
10/1/2016 - PDF - English - DIN
Learn More€66.07 -
VG 95236-18:2016-09
Tools for electrical components - Part 18: Banding tools for ties, detail standard, Text in German and English.
9/1/2016 - PDF - English, German - DIN
Learn More€85.79 -
NF EN 62841-2-11, C75-841-2-11 (07/2016)
Electric motor-operated hand-held tools,transportable tools and lawn and garden machinery - Safety - Part 2-11 : particular requirements for hand-held reciprocating saws
7/1/2016 - Paper - French - AFNOR
Learn More€103.33 -
SAE AS 39029/118:2021-01-12
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, ENGINE APPLICATION (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS)
6/6/2016 - PDF - English - SAE
Learn More€70.00 -
€39.35
-
DIN 87312:2016-05
Flat-ended keys for deck screw caps for filling and sounding pipes
5/1/2016 - PDF - German - DIN
Learn More€32.34 -
UNE-EN 62841-2-11:2016
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws (Endorsed by AENOR in May of 2016.)
5/1/2016 - PDF - English - AENOR
Learn More€68.00 -
BS EN 62841-2-4:2014
Electric motor-operated hand-held tools, transportable tools and lawn garden machinery. Safety Particular requirements for sanders polishers other than disc type
3/31/2016 - PDF - English - BSI
Learn More€250.00 -
€0.00
-
€60.67
-
€48.00
-
NF E71-211 (12/2015)
Nail sets (or taper punches) - Pin punches - Centre punches
12/1/2015 - Paper - French - AFNOR
Learn More€48.00 -
NF E73-107 (12/2015)
Pliers and nippers - End cutting nippers (large rivet) for soft wire - Pinces et tenailles - Pinces coupantes façon Comté
12/1/2015 - Paper - French - AFNOR
Learn More€25.67 -
€34.67
-
NF E71-001 (12/2015)
Tools for hammering and allied tools - Terminology - Nomenclature
12/1/2015 - Paper - French - AFNOR
Learn More€86.67 -
IEC 62841-2-11:2015
IEC 62841-2-11:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
11/18/2015 - PDF - English, French - IEC
Learn More€173.00 -
VG 95236-4:2015-07
Tools for electrical components - Part 4: Inserting and extracting tools for contacts, detail standard, Text in German and English.
7/1/2015 - PDF - English, German - DIN
Learn More€99.35 -
15/30322309 DC:2015
BS ISO 9242. Pliers and nippers. Construction worker’s pincers. Dimensions and test values
6/22/2015 - PDF - English - BSI
Learn More€24.00 -
VG 95236-12:2015-06
Tools for electrical components - Part 12: Crimping tools for contacts for connectors, hand actuated, detail standard, Text in German and English.
6/1/2015 - PDF - English, German - DIN
Learn More€72.80 -
BS ISO 3317:2015
Assembly tools for screws and nuts. Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
5/31/2015 - PDF - English - BSI
Learn More€151.00 -
VG 95236-19:2015-05
Tools for electrical components - Part 19: Processing tool for RJ45 plug connector according to VG 96938, detail standard, Text in German and English.
5/1/2015 - PDF - English, German - DIN
Learn More€65.89 -
€60.67
-
BS ISO 7738:2015
Assembly tools for screws and nuts. Combination wrenches. Lengths of wrenches and maximum thickness of heads
4/30/2015 - PDF - English - BSI
Learn More€151.00 -
ISO 3317:2015 (R2020)
Assembly tools for screws and nuts
Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
4/29/2015 - Paper - French - ISO
Learn More€48.00 -
ISO 3317:2015 (R2020)
Assembly tools for screws and nuts
Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
4/29/2015 - Paper - English - ISO
Learn More€48.00 -
SAE AS 22520/29:2020-11-13
CRIMPING TOOLS, TYPE 1, HAND OR POWER ACTUATED, WIRE TERMINATION, PNEUMATIC TOOL, CONTACT WIRE BARREL SIZES 12 THROUGH 20
4/28/2015 - PDF - English - SAE
Learn More€60.00 -
€48.00
-
€48.00
-
VG 95236-27:2015-03
Tools for electrical components - Part 27: Positioners for basic tool VG 95236-103 (M22520/2-01), special application, detail standard, Text in German and English.
3/1/2015 - PDF - English, German - DIN
Learn More€59.63 -
SAE AS 22520/28:2015-02-24
CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION, PNEUMATIC TOOL FOR WIRE BARREL SIZES 20 THROUGH 28
2/24/2015 - PDF - English - SAE
Learn More€60.00 -
SAE AS 22520/30:2019-12-27
CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION, ACCESSORY HARDWARE FOR AS22520/28 AND AS22520/29 TOOLS
2/24/2015 - PDF - English - SAE
Learn More€47.00 -
VG 95236-14:2014-12
Tools for electrical components - Part 14: Pressing tools for end-sleeves for cores, hand actuated, detail standard, Text in German and English.
12/1/2014 - PDF - English, German - DIN
Learn More€79.72 -
SAE AS 22520/31:2019-10-28
CRIMPING TOOL, TYPE 2, TERMINAL, HAND, FOR SHIELDED SIZE 12 OUTER CONTACTS
11/11/2014 - PDF - English - SAE
Learn More€66.00 -
SAE AS 22520/4:2019-10-28
CRIMPING TOOLS, TYPE II, CONTACT, ELECTRIC, HAND FOR SHIELDED OUTER CONTACTS
11/11/2014 - PDF - English - SAE
Learn More€66.00 -
€32.34
-
€32.34
-
€32.34
-
€39.35
-
NF ISO 2351-3, E74-353-3 (05/2014)
Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3 : screwdriver bits for hexagon socket screws - Outils de manoeuvre pour vis et écrous
5/1/2014 - Paper - French - AFNOR
Learn More€46.55 -
ISO 2936:2014 (R2019)
Assembly tools for screws and nuts
Hexagon socket screw keys
4/28/2014 - Paper - French - ISO
Learn More€72.00 -
ISO 2936:2014 (R2019)
Assembly tools for screws and nuts
Hexagon socket screw keys
4/28/2014 - Paper - English - ISO
Learn More€72.00 -
€39.35
-
€39.35
-
UNE-EN 60745-2-23:2013
Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools
11/6/2013 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 60745-2-23:2013
Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools
11/6/2013 - PDF - English - AENOR
Learn More€81.60 -
VG 85534:2013-11
Cutter for electric cables, Text German and English
11/1/2013 - PDF - English, German - DIN
Learn More€52.90 -
€32.34
-
DIN 7424:2013-10
Socket wrenches with hexagon drive extension for hexagon bolts, machine operated
10/1/2013 - PDF - German - DIN
Learn More€39.35 -
BS EN 60745-2-23:2013
Hand-held motor-operated electric tools. Safety Particular requirements for die grinders and small rotary tools
8/31/2013 - PDF - English - BSI
Learn More€250.00 -
VG 95236-17:2013-05
Tools for electrical components - Part 17: tightening and releasing tools, detail specification, Text in German and English.
5/1/2013 - PDF - English, German - DIN
Learn More€79.72 -
BS EN 50109-2-2:1995
Hand crimping tools. Tools for the crimp termination of electric cables and wires low frequency radio applications Particular requirements connectors concentric contacts. Open throat tools with removable interchangeable dies, sizes A to G, Q T, V W
2/28/2013 - PDF - English - BSI
Learn More€151.00 -
UNE-EN 50109-2-2:1995/AC:2012
Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-2: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with removable and interchangeable dies, sizes A to G, Q to T, V and W (Endorsed by AENOR in January of 2013.)
1/1/2013 - PDF - English - AENOR
Learn More€0.00 -
SAE J 2485:2012-12-20
Fastener Part Standard - Machine Screw Nuts (Metric and Inch)
12/20/2012 - PDF - English - SAE
Learn More€89.00 -
IEC 60745-2-23:2012
IEC 60745-2-23:2012 Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools
12/13/2012 - PDF - English, French - IEC
Learn More€132.00 -
€52.90
-
UNE-ISO 2236:2012
Assembly tools for screws and nuts -- Forged and tubular socket wrenches -- Maximum outside head dimensions
9/5/2012 - PDF - Spanish - AENOR
Learn More€25.00 -
SAE AS 22520/40:2023-10-03
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, TYPE II T-HEAD FOR TERMINAL LUGS AND SPLICES SIZE 22-14
9/5/2012 - PDF - English - SAE
Learn More€60.00 -
SAE AS 955:2012-07-24
Metric Sockets, Wrenches, Hand Twelve Point, High Strength, Thin Wall
7/24/2012 - PDF - English - SAE
Learn More€116.00 -
UNE 16513:2012
Assembly tools for screws and nuts. Single head engineer's wrenches. Characteristics and tests methods.
7/4/2012 - PDF - Spanish - AENOR
Learn More€27.00 -
VG 95236-6:2012-04
Tools for electrical components - Part 6: Generic specification, Text in German and English
4/1/2012 - PDF - English, German - DIN
Learn More€85.79 -
UNE 16559:2000 ERRATUM:2012
Pipe cutting tools. Plastic and cooper pipe automatic cutters. Specifications and tests.
3/28/2012 - PDF - Spanish - AENOR
Learn More€0.00 -
DIN 3129:2012-03
Assembly tools for screws and nuts - Square drive socket wrenches, power-driven and accessories - Technical specifications and test torques
3/1/2012 - PDF - German - DIN
Learn More€59.63 -
€22.99
-
€39.35
-
€32.34
-
€22.99
-
€22.99
-
€22.99
-
€22.99
-
DIN 7255:2012-02
Engineers' cold chisels and allied tools - Technical specifications.
2/1/2012 - PDF - German - DIN
Learn More€32.34 -
€22.99
-
VG 95236-16:2012-02
Tools for electrical components - Part 16: Stripping tools, detail specification, Text in German and English.
2/1/2012 - PDF - English, German - DIN
Learn More€110.00 -
SAE AS 22520:2018-02-22
Crimping Tools, Wire Termination, General Specification For
10/24/2011 - PDF - English - SAE
Learn More€113.00 -
BS ISO 1174-1:2011
Assembly tools for screws and nuts. Driving squares hand socket
8/31/2011 - PDF - English - BSI
Learn More€151.00 -
€48.00
-
€48.00
-
€32.34
-
€40.56
-
IEC 60745-2-5:2010
IEC 60745-2-5:2010 Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws
7/22/2010 - PDF - English, French - IEC
Learn More€311.00 -
UNE 16507-1:2010
Assembly tools for screws and nuts. Square drive sockets. Part 1: Hand-operated sockets. Technical specifications.
4/21/2010 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE 16535:2010
Pliers and nippers. Carpenter's pincers. Technical specifications and tests.
4/21/2010 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE 16507-2:2010
Assembly tools for screws and nuts. Square drive sockets. Part 2: Machine-operated sockets ("impact"). Technical specifications.
4/21/2010 - PDF - Spanish - AENOR
Learn More€49.00 -
NF E73-150 (03/2010)
Gaspipe pliers - Dimensions and designation - Pinces à gaz
3/1/2010 - Paper - French - AFNOR
Learn More€34.67 -
€41.00
-
€80.00
-
€32.34
-
UNE 16591-4:2009
Mason picks, picks and similar tools. Part 4: Brick hammer. Technical specifications.
7/15/2009 - PDF - Spanish - AENOR
Learn More€27.00 -
DIN 133:2009-07
Assembly tools for screws and nuts - Slugging wrenches, open end - Technical specifications
7/1/2009 - PDF - German - DIN
Learn More€32.34 -
DIN 905:2009-07
Assembly tools for screws and nuts - Tee wrenches, male square - Technical specifications
7/1/2009 - PDF - German - DIN
Learn More€32.34 -
DIN 5200:2009-07
Assembly tools for screws and nuts - Screwdrivers for slotted head screws, double offset - Dimensions and requirements
7/1/2009 - PDF - German - DIN
Learn More€22.99 -
DIN 7427:2009-07
Assembly tools for screws and nuts - Square drive sockets and hexagon drive extensions for hexagon insert bits - Technical specifications
7/1/2009 - PDF - German - DIN
Learn More€39.35 -
DIN 7444:2009-07
Assembly tools for screws and nuts - Slugging wrenches, box - Technical specifications
7/1/2009 - PDF - German - DIN
Learn More€32.34 -
NF E71-213 (07/2009) (R2015)
Tools for hammering, hitting and riveting - Dimensions and technical specification of wall-drills - Outillage de martellerie et outillage connexe
7/1/2009 - Paper - French - AFNOR
Learn More€48.00 -
UNE-ISO 1173:2009
Assembly tools for screws and nuts -- Drive ends for hand- and machine-operated screwdriver bits and connecting parts -- Dimensions, torque testing
6/24/2009 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-ISO 1174-1:2009
Assembly tools for screws and nuts -- Driving squares -- Part 1: Driving squares for hand socket tools
5/20/2009 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-ISO 1174-2:2009 (R2021)
Assembly tools for screws and nuts -- Driving squares -- Part 2: Driving squares for power socket tools
5/20/2009 - PDF - Spanish - AENOR
Learn More€49.00 -
€0.00
-
€0.00
-
NBN EN 3711:2008
Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset
11/26/2008 - PDF - English - NBN
Learn More€58.00 -
NBN EN 3710:2008
Aerospace series - Sockets, bi-hexagonal - Technical Specification
11/26/2008 - PDF - English - NBN
Learn More€58.00 -
UNE 16536:2008
Pliers and nippers. Construction worker's pincers. Dimensions and test values.
9/17/2008 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE 16591-2:2008
Mason picks, picks and similar tools. Part 2: Mason picks. Technical specifications, head geometry, types and dimensions.
9/17/2008 - PDF - Spanish - AENOR
Learn More€39.00 -
DIN 900:2008-09
Assembly tools for screws and nuts - Tommy bars for socket wrenches - Technical specifications
9/1/2008 - PDF - German - DIN
Learn More€32.34 -
IEC 60745-2-4:2002+AMD1:2008 Edition 2.1
IEC 60745-2-4:2002+AMD1:2008 (Consolidated version) Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
8/13/2008 - PDF - English, French - IEC
Learn More€92.00 -
IEC 60745-2-8:2003+AMD1:2008 Edition 2.1
IEC 60745-2-8:2003+AMD1:2008 (Consolidated version) Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
8/13/2008 - PDF - English, French - IEC
Learn More€75.00 -
IEC 60745-2-2:2003+AMD1:2008 Edition 2.1
IEC 60745-2-2:2003+AMD1:2008 (Consolidated version) Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches
7/17/2008 - PDF - English, French - IEC
Learn More€75.00 -
IEC 60745-2-1:2003+AMD1:2008 Edition 2.1
IEC 60745-2-1:2003+AMD1:2008 (Consolidated version) Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills
7/17/2008 - PDF - English, French - IEC
Learn More€150.00 -
UNE-ISO 1085:2008
Assembly tools for screws and nuts. Double-ended wrenches. Size pairing.
6/18/2008 - PDF - Spanish - AENOR
Learn More€27.00 -
IEC 60745-2-4:2002/AMD1:2008
IEC 60745-2-4:2002/AMD1:2008 Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
5/27/2008 - PDF - English, French - IEC
Learn More€23.00 -
IEC 60745-2-8:2003/AMD1:2008
IEC 60745-2-8:2003/AMD1:2008 Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
5/27/2008 - PDF - English, French - IEC
Learn More€12.00 -
IEC 60745-2-2:2003/AMD1:2008
IEC 60745-2-2:2003/AMD1:2008 Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches
5/21/2008 - PDF - English, French - IEC
Learn More€12.00 -
IEC 60745-2-1:2003/AMD1:2008
IEC 60745-2-1:2003/AMD1:2008 Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills
5/21/2008 - PDF - English, French - IEC
Learn More€23.00 -
UNE-EN 3710:2008
Aerospace series - Sockets, bi-hexagonal - Technical Specification (Endorsed by AENOR in May of 2008.)
5/1/2008 - PDF - English - AENOR
Learn More€28.00 -
UNE-EN 3711:2008
Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset (Endorsed by AENOR in May of 2008.)
5/1/2008 - PDF - English - AENOR
Learn More€35.00 -
€25.00
-
UNE 16506-1:2008
Asembly tools for screws and nuts. Screwdrivers bits. Part 1 Screwdriver bits for slotted head screws, with sank. Dimensions.
3/26/2008 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE 16520-2:2008
Assembly tools for screws and nuts. Screwdrivers for cross-recessed head screws. Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers.
3/26/2008 - PDF - Spanish - AENOR
Learn More€34.00 -
€25.00
-
€80.00
-
UNE 16502:2008
Assembly tools for screws and nuts. Wrench and socket openings. Tolerances for general use.
1/23/2008 - PDF - Spanish - AENOR
Learn More€17.00 -
DIN 3125:2008-01
Hexagon socket wrenches, spin type - Dimensions and test torques
1/1/2008 - PDF - German - DIN
Learn More€39.35 -
€0.00
-
DIN 897:2007-11
Box wrenches, double-head, modified offset - Dimensions and test torques series A
11/1/2007 - PDF - German - DIN
Learn More€45.98 -
DIN 3124:2007-11
Hand-operated socket wrenches, square drive for hexagon screws
11/1/2007 - PDF - German - DIN
Learn More€52.90 -
DIN 896:2007-10
Tee wrenches socket, massive and tubular double head - Dimensions and test torques series A
10/1/2007 - PDF - German - DIN
Learn More€52.90 -
DIN 837:2007-09
Box wrenches, double head for subordinate applications - Dimensions and test torques
9/1/2007 - PDF - German - DIN
Learn More€52.90 -
€52.90
-
DIN 894:2007-09
Single-head engineers wrenches for subordinate applications - Dimensions and test torques
9/1/2007 - PDF - German - DIN
Learn More€45.98 -
DIN 895:2007-09
Engineers wrenches for subordinate applications - Dimensions and test torques
9/1/2007 - PDF - German - DIN
Learn More€45.98 -
€52.90
-
€45.98
-
€45.98
-
DIN 3112:2007-09
Tee wrench socket, single head and tubular single-head - Test torques series A
9/1/2007 - PDF - German - DIN
Learn More€52.90 -
DIN 3113:2007-09
Combination wrenches with equal openings - Test torque series A and C
9/1/2007 - PDF - German - DIN
Learn More€52.90 -
€45.98
-
€45.98
-
NF E71-016 (09/2007)
Hammers with steel heads - Dimensions - Marteaux à tête en acier
9/1/2007 - Paper - French - AFNOR
Learn More€48.00 -
DIN 2325:2007-07
Screw driver for screws with internal serration - Screw driver points, gauges and test specimens for torque testing
7/1/2007 - PDF - German - DIN
Learn More€52.90 -
DIN ISO 691:2007-04
Assembly tools for screws and nuts - Wrench and socket openings - Tolerances for general use (ISO 691:2005)
4/1/2007 - PDF - German - DIN
Learn More€39.35 -
DIN ISO 691:2007-04
Assembly tools for screws and nuts - Wrench and socket openings - Tolerances for general use (ISO 691:2005)
4/1/2007 - PDF - English - DIN
Learn More€49.16 -
€39.35
-
UNE 16541:2007
Pliers and nippers for electronics. General technical requirements.
1/24/2007 - PDF - Spanish - AENOR
Learn More€27.00 -
€39.00
-
UNE 16543:2007
Pliers and nippers for electronics. Single purpose nippers. Cutting nippers. Technical especifications.
1/24/2007 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE 16544:2006
Pliers and nippers for electronics. Single purpose pliers. Pliers for gripping and manipulating. Technical especifications.
11/22/2006 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE 16516-1:2006
Assembly tools for screws and nuts. Screwdrivers for slotted-head screws. Part 1: Tips for hand and machine operated screwdrivers. Dimensions, technical especifications and tests
9/20/2006 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE 16516-2:2006
Assembly tools for screws and nuts. Screwdrivers for slotted head screws. Part 2: General requirements, lengths of blades and marking of hand operated screwdrivers
9/20/2006 - PDF - Spanish - AENOR
Learn More€34.00 -
€68.00
-
€85.79
-
DIN ISO 5743:2006-09
Pliers and nippers - General technical requirements (ISO 5743:2004)
9/1/2006 - PDF - German - DIN
Learn More€45.98 -
DIN ISO 5743:2006-09
Pliers and nippers - General technical requirements (ISO 5743:2004)
9/1/2006 - PDF - English - DIN
Learn More€57.57 -
€79.72
-
€99.44
-
DIN ISO 5745:2006-09
Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values (ISO 5745:2004)
9/1/2006 - PDF - German - DIN
Learn More€65.89 -
DIN ISO 5745:2006-09
Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values (ISO 5745:2004)
9/1/2006 - PDF - English - DIN
Learn More€82.52 -
DIN ISO 5746:2006-09
Pliers and nippers - Engineer's and lineman's pliers - Dimensions and test values (ISO 5746:2004)
9/1/2006 - PDF - German - DIN
Learn More€52.90 -
DIN ISO 5746:2006-09
Pliers and nippers - Engineer's and lineman's pliers - Dimensions and test values (ISO 5746:2004)
9/1/2006 - PDF - English - DIN
Learn More€66.07